Top Banner
VEO 100 Personal Dive Computer (PDC) OPERATING MANUAL OCEANIC ®
60

OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

Jul 28, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

VEO 100

Personal Dive Computer (PDC)

OPERATING MANUAL

OCEANIC®

Page 2: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

������������� ��� ����For details, refer to the Product Warranty Registration Card provided.

��� ����������This operating manual is copyrighted, all rights are reserved. It may not, in whole or in part, be copied, photocopied,reproduced, translated, or reduced to any electronic medium or machine readable form without prior consent in writingfrom Oceanic / 2002 Design.

Veo 100 Operating Manual, Doc. No. 12-2373© 2002 Design 2002

San Leandro, Ca. USA 94577

� ����� �������Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre DivePlanning Sequence, Variable Ascent Rate Indicator, Set Point, and Control Console are all registered and unregisteredtrademarks of Oceanic. All rights are reserved.

������������U.S. Patents have been issued, or applied for, to protect the following design features:Dive Time Remaining (U.S. Patent no. 4,586,136), Data Sensing and Processing Device (U.S. Patent no. 4,882,678),and Variable Ascent Rate Indicator (U.S. Patent no. 5,156,055). User Setable Display (U.S. Patent no. 5,845,235) isowned by Suunto Oy (Finland).

����� ����������The program within the Veo 100 simulates the absorption of nitrogen into the body by using a mathematical model. Thismodel is merely a way to apply a limited set of data to a large range of experiences. The Veo 100 dive computermodel is based upon the latest research and experiments in decompression theory. Still, using the Veo 100, justas using the U.S. Navy (or other) No Decompression Tables, is no guarantee of avoiding decom-pression sickness, i.e. “the bends.” Every diver’s physiology is different, and can even vary from day to day.No machine can predict how your body will react to a particular dive profile.

Page 3: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��������

������������� ��� ���� ����������������������������������������������������������������������������������������������������������������������������� ������� ��������������������������������������������������������������������������������������������������������������������������������������������������������������������� ������ ���������� ��������������������������������������������������������������������������������������������������������������������������������������� �

������������ ������������������������������������������������������������������������������������������������������������������������������������������������������������ �

������ �� ������� ��������������������������������������������������������������������������������������������� ���� ������ ���������������������������������������������������������������������������������������������������������������������������������������������������������� ���� ������� ���������������������������������������������������������������������������������������������������������������������������������������������������� ��� �� ���� ������������������������������������������������������������������������������������������������������������������������������������������������������������� �

������������� ���������� �� ������������������������������������������������������������������������������������������������������������������������� ��������������������������������� ����������������������������������������������������������������������������������������������������������������� ��

������������ ����������� �������������������������������������������������������������������������������������������������������������������������������� �� ����� ����!� ����������������������������������������������������������������������������������������������������������������������������������������������������� ����"�� ����!� ������������������������������������������������������������������������������������������������������������������������������������������������������� �� ��� ����! ��������������������������������������������������������������������������������������������������������������������������������������������������������� ����"�������� ����! ��������������������������������������������������������������������������������������������������������������������������������������������� ��

��� ������� ������������������������������������������������������������������������������������������������������������������������������������������������������ ����#� ����!�$������� ������������������������������������������������������������������������������������������������������������������������������������������ �%

����� �� �������� ����������������������������������������������������������������������������������������������� ������ ���� �������������������������������������������������������������������������������������������������������������������������������������������������������������� ���� �������!����� ��������������������������������������������������������������������������������������������������������������������������������������������� �"�� �������� ������������������������������������������������������������������������������������������������������������������������������������������������������ �"� ���� �������������!����� ������������������������������������������������������������������������������������������������������������������������� ��������� ���������������������������������������������������������������������������������������������������������������������������������������������������������������� ����� ��������������������������� ������������������������������������������������������������������������������������������������������������ �#

Page 4: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�������� �������� !"

���� #���� ������������������������������������������������������������������������������������������������������������������� ���� �������� �� ���� �������������������������������������������������������������������������������������������������������������������������������������� ����� ������������ ����������������������������������������������������������������������������������������������������������������������������������������� ��������� �������� ����� ����������������������������������������������������������������������������������������������������������������������� �"����� �������� ����� ����������������������������������������������������������������������������������������������������������������������������� �� ����������� �������������������������������������������������������������������������������������������������������������������������������������������������� #�

$������������������&�� ���������������������������������������������������������������������������������������������������������������������������������� '� ��!�����������&��� ������������������������������������������������������������������������������������������������������������������������������������� '%�""��������������&�������������������&�� ��������������������������������������������������������������������������������������� ''

���� ���� #���� �������������������������������������������������������������������������������������������������������� �������� ���� �������� ���������������������������������������������������������������������������������������������������������������������������������� #�� ���������� �� ���������������������������������������������������������������������������������������������������������������������������������������������� #����� ������ ���������� ���$������ ������� �% ���������������������������������������������������������������������������������� #"

��"�����(�!�)� ��������* ������������������������������������������������������������������������������������������������������������������������������������� '+,��� �-��,�������.�/������* ����������������������������������������������������������������������������������������������������������������������������� '0����&�� �������������������������������������������������������������������������������������������������������������������������������������������������������������� '0

���� ������� ������� � ����������������������������������������������������������������������������������������������������������������������������������� &� ���������� � ����������������������������������������������������������������������������������������������������������������������������������������������������� &�

$����� ������������������������������������������������������������������������������������������������������������������������ ���� �������������� ��������������������������������������������������������������������������������������������������������������������������������������������� &&����������������� ��� ��������������������������������������������������������������������������������������������������������������������������������� &&����� �� ���������� �������������������������������������������������������������������������������������������������������������������������������������� &�������������������� ������������������������������������������������������������������������������������������������������������������������������������ '�������������� ����������������������������������������������������������������������������������������������������������������������������������������������������� '#�������� ������� ������������������������������������������������������������������������������������������������������������������������������������������ '��� ���� �� � ��������������������������������������������������������������������������������������������������������������������������������������������������� '�

Page 5: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

The following symbols are used throughout this manual to bring yourattention to situations that require special consideration. Be sure to readand follow all instructions carefully.

A NOTE is used to emphasize an important general information.

A CAUTION is used convey information that will result in damage to parts if theinformation is not adhered to.

A WARNING is used to emphasize information that could result in serious injuryor death if the information is not adhered to.

Pay special attention to items marked with this Warning symbol.

Page 6: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

%

������������� ��

$�"�������1� $������� ������� ������������� �������� �������*�&2� ����������&���� �����*���"��������� �����*� �-��3�"���4� �������*�&2� ������ �-��&����� ����!����������� �����*� ����������#�����*� ���"���������$�����������*�����������#

�� �����*�����&��5� �������*� ����6� �����*���"��� �������*������������(��"� ��������������������������� �����*�7��������&��

��

� �

Page 7: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

������������ ������

&����$' �(��( �� !�)��* +��, �, � � �--. /�� 0�1�231� ( 2! 2�! ��! (1�2�! �, �� 2��� ��) ��04�� (�25 �/ 2�! � 5 ( �� #2��23 +,��, 4(�)�! 1 �04�(6�2�� &2(���*1 2�! �25 �/ � ��00 �!2����1 21 + 3321 * � (23 4(�!��� ��5�(02�����

Page 8: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

7

������������Welcome to Oceanic and thank you for choosing the Veo 100Personal Dive Computer (PDC)!

It is extremely important that you read this Operating Manual insequence and understand it completely before attempting to usethe Veo 100.

It is equally important that you read the Oceanic Dive ComputerSafety and Reference Manual (Doc. No. 12-2262) provided withyour Veo 100. It contains information that you must becomefamiliar with prior to diving with your Veo 100.

Remember that technology is no substitute for common sense, anda dive computer only provides the person using it with data, notthe knowledge to use it.

The Veo 100 has numerous features that are described through-out this manual.

������� 8�����The Control Button (Fig. 1) allows you to select display optionsand access specific information when you want to see it.

(������*�$������� �����

Page 9: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

9

8� $��:�

��11� ��2!��* 82( $(24, ���8$"The Tissue Loading Bar Graph (Fig. 2a) represents tissue loadingof nitrogen, showing your relative no decompression or decom-pression status.

The Tissue Loading Bar Graph monitors 12 different nitrogencompartments simultaneously and displays the one that is incontrol of your dive.

As your depth and elapsed dive time increase, segments will addto the Graph, and as you ascend to shallower depths, the BarGraph will begin to recede, indicating that additional no decom-pression time is allowed for multilevel diving.

It is divided into a green No Decompression (normal) zone, ayellow Caution zone (also No Decompression), and a redDecompression (danger) zone.

While you cannot provide a guarantee against the occurrence ofdecompression sickness, you may choose your own personalzone of caution based upon age, physique, excessive weight,etc., to reduce the statistical risk.

(����%�*��� �

Page 10: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�-

�2(�2;3 1� �� �2� ��!��2��( ����"The Variable Ascent Rate Indicator (Fig. 3a) provides a visualrepresentation of ascent speed (i.e., an ascent speedometer).Green is a 'normal' rate, yellow a 'caution' rate, and red is 'TooFast'. The segments of the VARI represent two sets of speedswhich change at a reference depth of 60 feet (18 meters). Referto the chart for segment values.

&����$' � ! 4�,1 *( 2� ( �,2� %- 5 � ��7 0 � (1".21� �� (2� 1 1,��3! ��� <� ! %- 540 ��7 040"� �! 4�,1 �5 %- 5 � ��7 0 � (1" 2�! 1,233�+ (. 21� ��(2� 1 1,��3! ��� <� ! �- 540 �9 040"�

��: = ��#���� �������

� 4�, ��1432/1During a dive, the Current Depth display (Fig. 3b), indicatesDepths from 0 to 330 feet (99 meters) in increments of 1 foot (.1meter). The Depth range is extended to 399 feet (120 meters)when it is set to operate in Digital Gauge Mode.

By pressing the button, the Maximum Depth reached duringthat dive will be displayed.

During a Decompression Dive, the required Ceiling StopDepth is displayed in the Max Depth position.(����'�*������8� ����

��������������� ���������������� ��������� ��������� ��� ���� ���� ���� ������������� ����� �!� "�� "!

�������������������������������� ��������� ��������� ��� ���� ���� ���� ������������ ����������� � "�� "�

����������

Page 11: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

��0 ��1432/1Time displays are shown in hour:minute format (i.e., 1:16represents 1 hour and 16 minutes, not 116 minutes!). The colonthat separates hours and minutes blinks once per second whenthe display is indicating real time (e.g., Elapsed Dive Time), andis solid (non-blinking) when times are calculated projections (e.g.,Time to Fly).

The Main Time display has the largest digits of the display (Fig.4a) A second time display (Fig. 4b) is located above it. Bothdisplays are identified by clock icons.

�2� ��1432/Date is displayed only to identify dive data while it is viewed inthe Log Mode. When Units of Measure are set for 'Imperial', theMonth appears to the left of Day. When set for Metric, theMonth appears to the right of Day.

� 04 (2��( ��1432/Ambient Temperature is displayed in Surface Mode (Fig. 4c)and Log Mode, and can be viewed as an Alternate Display whenthe button is pressed while in a dive mode (Fig. 5a). If theTemperature exceeds a value of '99', 2 dashes ( - - ) will bedisplayed until temperature decreases to '99'.

(����9�*���"�� ����!��8��"���������.��4���

(����:�*���"���������-��"���

Page 12: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

��&�� ������The Veo 100 utilizes 1 - 3 volt CR2450 Lithium Battery whichshould provide from 100 dive hours of operation, if you conduct1 - one hour dive each time the unit is activated, to as many as300 dive hours of operation, if you conduct 3 or more one diveseach time the unit is activated.

��+ 82�� (/ ���!�����• Voltage level is checked upon activation and every 10

minutes during operation.• When 75 % of the Rated Power has been consumed, a

Battery icon will appear on the Surface Mode display (Fig.6a) flashing once per second as a warning that the Battery isto be replaced prior to conducting any further dives.

• Upon decreasing to a voltage level that will no longer sustainproper operation, the icon will flash 5 times followed byshutdown of the unit.

• If a Low Battery Condition exists when the unit is manuallyactivated (by pressing the button), the icon will appearflashing for 5 seconds followed by shutdown of the unit.

• If the button is not pressed to activate the unit prior to a dive(e.g., the unit activated automatically by immersion in water),and a Low Battery Condition exists, the Battery icon willappear flashing as a warning upon descent to 5 feet (1.5meters). No other information will be displayed and the unitwill not enter Dive Mode.(����;�*���#� ����!

����4���"���

Page 13: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

• If the unit did not display a Low Battery Condition prior toentering the Dive Mode, and a Low Battery Condition occursduring the dive, there will be sufficient Battery power tomaintain unit operation for the remainder of that dive.

• The Battery icon will not appear if a Low Battery Conditionoccurs during a dive. It will appear after the dive, upon entryinto Surface Mode.

• When the Battery is removed, settings and nitrogen calcula-tions for repetitive dives will be retained, if a new batterycan be inserted within 8 seconds. Otherwise the calculationswill reset to zero and settings must be reset.

����' �2�, !�1432/ ( 4( 1 ��1 ���>� 4� � 1 �5��5�(02�����

�� �1 �04 (2��) �,2� /�� ��! (1�2�! �, 5�(02�1.(2�* 1. 2�! )23� 1 �5 �, ��5�(02���� ( 4( 1 �� ! ��2)��! 2�/ 4�11�;3 0�1��! (1�2�!��* �,2� ���3! ( 1�3��� ((�(�

�, ��5�(02����23 ��1432/1 2( ! 1�(�; ! �� ! �2�3 21�, )2(���1 �4 (2���* 0�! 1 �, / 244 2( �� 2( 4( 61 �� ! �,(��*,��� �,�1 02��23�

Page 14: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

The Veo 100 is configured with contacts that will automatically activate the unitwhen the space between the contacts is bridged by a conductive material(immersed in water).

The contacts are the pins of the Data Port and stem of the Push Button.

It is important that the Data Port and Button be kept clean and free of anycontamination or debris that could cause the unit to activate unnecessarilyresulting in premature depletion of battery power.

It is also important that they be kept clean to ensure that the unit will activate andenter dive mode upon immersion and descent.

The Data Port and Button can be cleaned with fresh water and a soft bristlebrush.

&����$' �, & � ���)2���� 5 2��( +�33 ��� 5������� ��3 11 �� �1� � �� �2 �1 ( 1 ����*" 2�! �, ����2��1 2( ;(�!* ! +��,��� ��� (5 (6 �� � �5 �, ����2��1 ( 02�� !(/ !�(��* 2 ! 1� �� 2�! 2� 2�� 04� �102! �� 2���)2� �� 2� ! 4�,. �� +�33 ��0 �� ;(� 53/ �, � 1,�� �55

NOTICE

WET ACTIVATION

Page 15: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

������������� ��� ��

&����$' �(��( �� !�)��* +��, �, � � �--. /�� 0�1�231� ( 2! 2�! ��! (1�2�! �, �� 2��� ��) ��04�� (�25 �/ 2�! � 5 ( �� #2��23 +,��, 4(�)�! 1 �04�(6�2�� &2(���*1 2�! �25 �/ � ��00 �!2����1 21 + 3321 * � (23 4(�!��� ��5�(02�����

Page 16: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�%

��������

To Activate the Veo 100 - press and release the Button.

• Upon manual activation, the unit will enter Diagnostic Mode(Fig. 7), displaying all segments of the LCD as 8's, followedby dashes (- -), then a countdown from 9 to 0.

• Diagnostic Mode checks the display and battery voltage toensure that everything is within tolerance and functioningproperly.

• It will also check the ambient barometric pressure, andcalibrate its present depth as zero. At elevations of 2,000feet (610 meters) or higher, it will adjust its depth readingsand no decompression limits for that elevation.

&����$' �5 �� �1 02��233/ 2���)2� ! 2� 3 )2����1,�*, ( �,2� ��.--- 5 � ��.��- 0 � (1". �� +�33 4 (5�(0 2!�2*��1��� �, �? 5�33�+ ! ;/ �00 !�2� 1,��!�+��

Identification of the Computer ModuleTo view a screen that displays the unit's serial number andfirmware revision level, hold the button depressed as the Diagnos-tic countdown reaches 00. The Serial Number screen appears(Fig. 8). Upon releasing the button, the unit shuts Off. Press thebutton again to reactivate the unit.

(����+�*� ���������&��

(����0�*�.�����3�"���

Page 17: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

82�?�4 ���)2���� �� ������������������ ����������As a backup, the unit will also automatically activate by watercontact. This is accomplished by bridging the gap betweencontacts located on the Button and housing.

If no dive is made within 2 hours after activation, the unit willdeactivate. If the wet contacts are still wet, it will reactivate.

����� ��@�����While on the surface, the unit will automatically scroll through aSequence of displays including -• Surface Mode• Fly Mode• DeSat Mode• Plan Mode

As the Surface Sequence is scrolling, you can use the button toaccess Log Mode and Set Mode.

����� #���Surface Mode information includes (Fig. 9) -• Dive Number if the module is dry (0 if no dive made yet), or

the graphic H2O if the module is wet (Fig. 10)• Temperature (and icon).• Time of Day (with icon).• Surface Interval (with flashing colon) and Surface Time icon.

(������*�.��4���&���"���������!�

(�������*�.��4���&���"��������#���

Page 18: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�7

�( ��) �32����* � >� �� �����"The PDPS (Fig. 11) provides a sequence of theoretical dive timesavailable for depths ranging from 30 feet (9 meters) to 190 feet(57 meters) in 10 foot (3 meter) increments.

No decompression times (limits), or NDLs, are only displayed fordepths where there is at least 3 minutes of theoretical dive timeavailable at the depth, taking into account a descent rate of 60feet (18 meters) per minute.

The PDPS should be reviewed prior to every dive to help you planyour dive as required to avoid exceeding no decompressionlimits. For repetitive dives, it indicates adjusted dive times thatare available for the next dive, based on residual nitrogenfollowing the last dive and surface interval.

&����$' �, 2)2�32;3 !�) ��0 1 4(�)�! ! ;/ �, ���� 2( ��3/ 4( !������1� � 4 �!��* �� �/3��! (1�A 2�! 2�( ���1�04���� (2� /�� 02/ ,2) 3 11 ��0 2)2�32;3 �,2� ��!��2� ! ; �2�1 �5 �,�1 �( ��, (3�0��2����1�

��� #���After gaining access to Set Mode, settings can be made insequence one after the other, or you can access a specific itemthat you want to set, bypassing others.(�������*�, ,.

���(�)*��+)��+,+-$./�01,+�2)0+�3+*%

�+4*5 ���6++*�$2+*+7(%5/87(921.(#�����$�% &9�� $&9&#%&�����$��% �9�" $�9�&%'�����$�'% �9�� $�9�'%������$��% 9'" $9'�%"�����$��% 9&� $9&�%������$�&% 9#� $9#�%������$�"% 9�& $9�'%�����$#�% 9�� $9��%�����$##% 9�� $9�"%�����$#�% 9�# $9�&%�#���$#�% 9�� $9��%�&���$&�% 9�� $9��%�'���$&'% 9�� $9��%�����$&�% 9�" $9�"%�"���$'�% 9�" $9��%�����$'&% 9�� $9��%�����$'"% 9�' $9�'%

Page 19: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�9

You can set:• Units of Measure - Imperial or Metric• Hour Format - 12 or 24• Time of Day• Date• Digital Gauge Mode - On or Off• Water Activation - On or Off

To Access Set Mode and enter Settings:While the unit is scrolling through the Surface Sequence -• Press and hold the Button for 2 seconds, release when the Set

Units screen appears with the graphics FT and F (or M and C)flashing (Fig. 12).

• HINT: To bypass a parameter that you do notwant to set, keep the Button depressed until theitem you do want to set appears, then release it.

To change the setting for Units of Measure -• Press the Button momentarily and release to toggle between

Imperial (FT and F) and Metric (M and C).

• Press and Hold the Button for 2 seconds to save the setting,release when the graphic Hour and 12 (or 24) appear with12 (or 24) flashing (Fig. 13).

(�����%�*�.���<������4�&�����

(�����'�*�.���=����(��"�

Page 20: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�-

To change the setting for Hour Format -• Press the Button momentarily and release to toggle between

12 and 24.

• Press and Hold the Button for 2 seconds to save the setting,release when AM (or PM) and the Time of Day appear withthe Hour value flashing (Fig. 14).

To change the setting for Time of Day -• Repeatedly press the Button momentarily and release it until

the correct value for Hour appears (1: to 12:, or 0: to 23:).Do Not Hold the Button depressed.

• Press and Hold the Button for 2 seconds to save the setting,release when the Minute value flashes.

• Repeatedly press the Button momentarily and release it untilthe correct value for Minute appears (:00 to :59). Do NotHold the Button depressed.

• The Set Date screen appears with the graphic dAY and Yearvalue flashing (Fig. 15).

(�����9�*�.�����"�

(�����:�*�.��� ��

Page 21: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

To change the setting for Date -• Repeatedly press the Button momentarily and release it until

the correct value for Year appears (2004 to 2049). Do NotHold the Button depressed.

• Press and Hold the Button for 2 seconds to save the setting,release when the Month value flashes.

• Repeatedly press the Button momentarily and release it untilthe correct value for Month appears (01 to 12). Do Not Holdthe Button depressed.

• Press and Hold the Button for 2 seconds to save the setting,release when the Day value flashes.

• Repeatedly press the Button momentarily and release it untilthe correct value for Day appears (01 to 31). Do Not Holdthe Button depressed.

• Press and Hold the Button for 2 seconds to save the setting,release when the Set Gauge Mode screen appears with thegraphic GAU and OFF (or ON) flashing (Fig. 16).

(�����;�*�.��������&��

Page 22: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

To change the setting for Digital Gauge Mode -• Press the Button momentarily and release to toggle between

OFF and ON.

• Press and Hold the Button for 2 seconds to save the setting,release when the Set Wet Activation screen appears with thegraphics ACT, H2O, and ON (or OFF) flashing (Fig. 17).

To change the setting for Wet Activation -• Press the Button momentarily and release to toggle between

ON and OFF.

• Press and Hold the Button for 4 seconds to save the setting,release when the Surface Mode screen appears.

• During the 4 seconds, a PC screen will appear on the Veo150 and be bypassed.

(�����+�*�.���>�������-����

Page 23: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

PC INTERFACEPC Interface is not a setting or user function. It is included in theSet menu for easy access by the factory when calibrating the Veo100 module prior to shipping.

���� �������� ��$��� $�$� #���When Digital Gauge Mode is set for ON, the Veo 100 willoperate as a Digital Depth Gauge/Timer without performingnitrogen calculations (Fig. 18).

While in this mode, the range of the Current and MaximumDepth displays are extended to 399 feet (120 meters) to accom-modate activities involving diving with advanced breathing gasmixtures or free diving beyond the normal depth limit of the unit.Temperature and Time of Day can be viewed as an AlternateDisplay when the button is pressed.

(�����0�*�� �����������&��

Page 24: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

ResponsibleResponsible

Page 25: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

� ��������

&����$' �(��( �� !�)��* +��, �, � � �--. /��0�1� 231� ( 2! 2�! ��! (1�2�! �, �� 2��� ��) ��04�� ( �25 �/ 2�! � 5 ( �� #2��23 +,��,4(�)�! 1 �04�(�2�� &2(���*1 2�! �25 �/ � ��060 �!2����1 21 + 33 21 * � (23 4(�!��� ��5�(02�����

Page 26: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�%

���� #��� 8� $��:�As your depth and elapsed dive time increase, the TissueLoading Bar Graph (TLBG) will fill with segments (greentoward red) to represent the absorption of nitrogen (Fig. 19a).While ascending to shallower depths, the segments that havefilled the TLBG will begin to recede, offering a graphic represen-tation of your multilevel diving capability.

The Variable Ascent Rate Indicator (VARI) shows how fastyou are ascending (Fig. 19b). When you exceed an Ascent Rateof 60 fpm (18 mpm) if deeper than 60 feet (18m), or 30 fpm (9mpm) if shallower than 60 feet (18m), it will enter the red (TooFast) zone and all segments plus the graphic TOO FAST willflash (Fig. 20) until your Ascent Rate is slowed.

������� � �������During dive modes, 3 displays of information are available. Youcan change from one display to another as often as desired bymomentarily (< 2 seconds) pressing and releasing the Button.

During No Decompression conditions, you can choose how muchinformation is displayed at a given time. The Main Displaychosen will remain on the screen until you press the Button tochange it to another Main Display.

(����%��*������������(��

� �(�������*��� ��8�����

Page 27: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

During conditions in which cautionary type information is dis-played (e.g., Decompression, etc.), there is one Main Display ofimportant information relevant to the specific condition.

• You can then access Alternate Displays, that will automati-cally revert to the Main Display after 3 seconds.

�� ����#�������� ���� #���The Veo 100 will enter the No Decompression Dive Mode whenyou descend deeper to 5 feet (1.5 meters).

�� � ��04( 11��� 6 #2�� ��1432/ B� ��������Information includes Current Depth, Dive Time Remaining (andMode icon), and the Bar Graphs.

• press and release the Button to change to Main Display #2.

�� � ��04( 11��� 6 #2�� ��1432/ B� ��������Information includes Current Depth, Maximum Depth for that dive(and icon), Elapsed Dive Time (and icon), Dive Time Remaining(and Mode icon), and the Bar Graphs.

• press and release the Button to change to Main Display #3.

(����%%�*�3�� ����&���?%

(����%��*�3�� ����&���?�

3�� ���&�������

Page 28: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�7

�� � ��04( 11��� 6 #2�� ��1432/ B� ������ �Information includes Current Depth, Temperature, Time of Day,Dive Time Remaining (and Mode icon), and the Bar Graphs.

• Press and release the Button to view Display #1.

�� � ��04( 11��� ��) #�! 6 ���� ���� ������!�Upon ascending to 20 feet (6 meters) on any No Decompressiondive in which depth exceeded 30 feet (9 meters), a Safety Stop at15 feet (4.5 meters) will appear on the display with a 3 minutecountdown timer that counts down from 3:00 to :00 (min:sec).

Information includes Current Depth, Stop Depth (15 feet or 4.5meters), Stop Bar icon, Countdown Timer, Dive Time Remaining(and Mode icon), and applicable Bar Graphs.

The Safety Stop will be displayed until the countdown times out,or you descend below 30 feet (10 meters), or you surface. Thereis no Penalty if you surface prior to completing the Safety Stop.

����#�������� ���� #���The Veo 100 is designed to help you by providing a representa-tion of how close you are to entering decompression. Decom-pression Dive Mode activates when theoretical No Decompres-sion time/depth limits are exceeded.

(����%9��*�3�� ���.4��!�.���

(����%'��*�3�� ����&���?'

Page 29: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�9

Upon entering Decompression Mode, you should begin a safecontrolled ascent to a depth slightly deeper than, or equal to, theRequired Ceiling Stop Depth indicated (Fig. 25a) and decom-press for the Stop Time indicated (Fig. 25b).

• The UP Arrow and Deco Bar will flash if you are more than10 feet (3 meters) deeper than the Required Ceiling Depth.

• Once within 10 feet (3 meters) of, and below, the RequiredCeiling Depth, both Arrows and the Bar appear solid.

� ��04( 11��� ��) #�! 6 #2�� ��1432/ �������"�The amount of decompression Credit time that you receive isdependent on Depth, with slightly less Credit given the deeperyou are. You should stay slightly deeper than the Required StopDepth indicated until the next shallower Stop Depth appears.Then, you can slowly ascend to, but not shallower than thatindicated ceiling Stop Depth.

Main Display information includes - Current Depth, RequiredCeiling Stop Depth/Time, Total Ascent Time (and Mode icon),and applicable Bar Graphs.

Total Ascent Time (Fig. 26a) includes Stop Times required at allceilings and vertical Ascent Time calculated at 60 feet (18meters) per minute below 60 feet (18 meters) and 30 feet (9meters) per minute above 60 feet (18 meters). (����%;�*� ����&��

(����%:��*�@���!������ ���

� ���&�������

� �

Page 30: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�-

To view Alternate Displays of information during Deco situations,momentarily (< 2 seconds) press and release the button -

• 1 time to view Alternate Display #1• 2 times to view Alternate Display #2

Alternate Displays will revert to the Main Display after 3 seconds.

� �� 3� (�2� ��1432/ B��������#�Information includes - Current Depth, Max Depth for that dive(and icon), Elapsed Dive Time (and icon), Total Ascent Time (andMode icon), and applicable bar graphs.

• Press the Button to view Display #2.

� �� 3� (�2� ��1432/ B��������$�Information includes - Current Depth, Temperature, Time of Day,Total Ascent Time (and Mode icon), and applicable Bar Graphs.

• Press the Button to view Display #1.

(����%0�*� �������������?%

(����%+��*� �������������?�

Page 31: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

�������� #����Violation Modes that the Veo 100 can enter are termed - Condi-tional, Delayed, and Immediate. Permanent Violation Mode andGauge Mode are continuations of these.

• While in Violation Modes, Alternate Displays similar to thosefor Deco Mode can be accessed using the Button. They willrevert to the Main Display after 3 seconds.

���!�����23 ���32���� #�! The Veo 100 will enter a Conditional Violation Mode if youascend to a depth shallower (Fig. 29a) than the Re-quired Decompression Ceiling Stop Depth displayed (Fig.29b).

The Down Arrow, Deco Bar, and the Total Ascent Time displaywill flash until you descend below the Required Stop Depth. Alsodisplayed will be Current Depth and applicable Bar Graphs.

If you descend below the required decompression ceiling before5 minutes have elapsed, the unit will continue to function inDecompression Dive Mode. In this case, no off-gassing creditwill be given, and for each minute above the ceiling 11/2 minutesof Penalty Time will be added to Required Stop Time.

(����%��*�$�����������������

��

Page 32: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

The added Penalty (decompression) Time will then have to beworked off first, before obtaining off-gassing Credit.

Once the Penalty Time is worked-off, and off-gassing Creditbegins, required decompression Stop Depths and Time willdecrease toward zero, then the Tissue Loading Bar Graph willrecede into the yellow Caution Zone and operation will revert tothe No Decompression Dive Mode.

� 32/ ! ���32���� #�! B������� %�If you remain above the Required Ceiling Stop Depthfor 'more than 5 minutes', the Tissue Loading Bar Graphand Total Ascent Time display will flash until you descend belowthe Required Stop Depth. This is a continuation of a ConditionalViolation.

� 32/ ! ���32���� #�! B������� ��The Veo 100 cannot calculate decompression times for StopDepths much greater than 60 FT (18 M) and offers no indicationof how much time spent underwater would result in the need for agreater Stop Depth.

If your Decompression obligation requires a CeilingStop Depth 'between' 60 feet (18 meters) and 70 feet(21 meters), the Tissue Loading Bar Graph will flash. TotalAscent Time will still be displayed.

(����'��*� ��!������?�

(����'��*� ��!������?%

Page 33: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

You must ascend to just deeper than, and stay as close as pos-sible to, 60 feet (18 meters) without causing the Total Ascent Timedisplay to flash. When the Required Stop Depth indicates 50 FT/15 M, etc., you can ascend to those depths and continue decom-pressing.

� 32/ ! ���32���� #�! B� ����� ��If you descend deeper than 330 feet/99.5 meters, or399 feet/120 meters when operating in DigitalGauge Mode, the Tissue Loading Bar Graph will flash, and theCurrent Depth and Max Depth displays will only indicate 3dashes ( - - -).

Upon ascending above 330 feet/99.5 meters, or 399 feet/120meters when operating in Digital Gauge Mode, the Current Depthdisplay will be restored, however Max Depth will only display 3dashes (- - -) for the remainder of that dive. The Log for that divewill also only indicate 3 dashes (- - -) as the Max Depth achieved.

�00 !�2� ���32���� #�! 2�! ���32���� $2�* #�! During a Dive, if a ceiling greater than 70FT (21M) is required,an Immediate Violation Mode will be entered. This situa-tion would be preceded by entering Delayed Violation Mode #2,previously described. The Veo 100 would then operate withlimited functions in Violation Gauge Mode during the remain-der of that dive and for 24 hours after surfacing. (����'%�*� ��!������?'

Page 34: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

Violation Gauge Mode turns the Veo 100 into a digitalinstrument without any decompression functions. Only CurrentDepth, Max Depth, Elapsed Dive Time, and the Variable AscentRate Indicator will be displayed (Fig. 33). The full Tissue LoadingBar Graph will flash as a warning of this condition. Temperatureand Time of Day can be viewed as an Alternate Display when thebutton is pressed.

The Veo 100 will also enter an Immediate Violation Mode5 minutes after reaching the surface from a dive in which aDelayed Violation occurred.

On the surface, Violation Gauge Mode displays the DiveNumber, Temperature, Time of Day, Surface Interval, and the fullTissue Loading Bar Graph flashing (Fig. 34). It does not providethe Pre Dive Planning Sequence or the Time to Fly feature.

The countdown timer that appears with a single dash duringthe Surface Sequence is only provided to inform you of the timeremaining before normal operation can resume with full featuresand functions.

This condition is considered a Permanent Violation,and in the event that a dive is made during the 24hour period, a full 24 hour surface interval must thenbe served before all functions are restored.

(����''�*��������������&��������#����

(����'9�*��������������&����������4���

Page 35: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

������ ��������

&����$' �(��( �� !�)��* +��, �, � � �--. /��0�1� 231� ( 2! 2�! ��! (1�2�! �, �� 2��� ��) ��04�� ( �25 �/ 2�! � 5 ( �� #2��23 +,��, 4(�6)�! 1 �04�(�2�� &2(���*1 2�! �25 �/ � ��00 �!26����1 21 + 33 21 * � (23 4(�!��� ��5�(02�����

Page 36: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�%

���� ���� ����� #���When you ascend to 3 feet (1 meter) or shallower, the unit willenter Surface Mode and begin counting your Surface Interval.

��������� ������The first 10 minutes is, in affect, a Transition Period during whichtime the following information is displayed (Fig. 35):

• 'Number' of that dive (during that activation period)• Temperature• Time of Day• Surface Interval time (colon flashing) and icon (flashing)• Tissue Loading Bar Graph ( indicating current nitrogen

loading)

During the Transition Period, Log Mode can be accessed. Noother modes (e.g., Fly, Plan, Set) are displayed or accessible.

�� )� + �,2� !�) C1 ��*• Press the Button to view the first screen (Fig. 36).• Press the Button again to view the Data screen• Press the Button again to return to Surface Mode.• The unit will revert to Surface Mode after 2 minutes if the

button is not pressed.

Refer to page 36 for a description of the Log Mode displays.(����';�*�����.������?�

(����':�*�����������,����

Page 37: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

Log Data will not be stored in the unit's memory until the 10minute Transition Period on the surface is completed.

Once 10 minutes have elapsed, the Surface Mode icon andSurface Interval time display colon stop flashing indicating thatthe Dive and Transition Period are completed, and a subsequentDescent will be considered a new dive.

If you Descend during the 10 minute Transition Period, timeunderwater will be considered a continuation of that dive. Timespent at the surface will not be added as Dive Time.

��� �:� ��������� ������ ��:� ���� � :����"For the remainder of the first 2 hours after surfacing,information will continue to be displayed as the Surface Se-quence, scrolling through Surface Mode > Time to Fly > Time toDesaturate > Pre Dive Planning Sequence. You will have fullaccess to Log Mode and Set Mode.

��0 �� 3/=� 12��(2� The Time to Fly and Desat Timers begin counting down 10minutes after surfacing from a dive (after the Transition Period).The FLY countdown (Fig. 37) always begins at 23:50 (hr:min)and the Desat countdown (Fig. 38) at 23:50 (maximum).

(����'+�*���"�����(�!

(����'0�*���"����� �������

Page 38: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�7

If a Violation occurred during the dive a single dash ( - ) willappear instead of the letters FLY (Fig. 39). DeSat time will not bedisplayed.

The Time to Fly counter is provided to assist you with decidingwhen enough surface time has elapsed to fly (or travel to higherelevations).

• After a surface interval of 12 hours, you may choose to fly (ortravel to higher elevations), provided that your dive profile(s)did not enter decompression.

• If your diving involved decompression or a repetitive, multiday profile, it is strongly recommended that you wait a full 24hours after your last dive to add a greater degree of protec-tion.

�( ��) �32����* � >� �� �����"After a dive, the PDPS provides 'adjusted' No DecompressionLimits (Fig. 40) based on residual nitrogen calculated to beremaining from that dive and previous dives in the same series.

��* #�! The Veo 100 will store up to 12 dives in its Log for viewing.

Each dive has 2 Log screens. The first is the Dive Identifier andthe second displays Dive Data.

(����'��*��(�!�&���4���������������-��

(����9��*��5�����3 ��

Page 39: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�9

Once the Log is full (12 dives), each subsequent dive will thenoverwrite the oldest dive stored in the Log. It is therefore sug-gested that you transfer the Log's data to your log book at theend of each day of diving.

Log data will not be lost when the battery is removed/replaced,however, factory service and calibration will delete the data.

The first dive conducted each time the unit is Activated will be#1, therefore there may be multiple #1 dives in the Log.

Dives are displayed in a reverse sequence that starts with the divemost recently recorded, back to the oldest one stored. The mostrecent dive will always be the first shown in the sequence.

To access Log Mode -• Press and release the Button momentarily (< 2 seconds) while

the unit is scrolling through the Surface Sequence.• The first screen (Dive Identifier) of the most recent dive con-

ducted will appear displaying (Fig. 41) - • Dive Number (for that activation period) • Log Mode icon • Date of the Dive • Time of Day (that the dive started)

• Press the Button momentarily to view the Second Screen. (����9��*������ �-�������4����

Page 40: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�-

Dive Data (the second screen) includes (Fig. 42) -• Maximum Depth - reached during the dive (and icon)• Log Mode icon• Temperature - minimum during the dive (and icon)• Surface Interval - prior to that dive (and icon)• Elapsed Dive Time (and icon)• Variable Ascent Rate Indicator - showing the maximum ascent

rate maintained for 4 consecutive seconds during the dive.• Tissue Loading Bar Graph - showing tissue nitrogen loading

at the time you surfaced at the end of the dive. Also, thesegment that reflects the maximum loading during the divewill appear flashing.

To access the first screen of the previous dive's Log, press theButton momentarily (< 2 seconds).

To return to the Surface Sequence at any time while in Log Mode,press the Button for 4 seconds, releasing it when Surface Modeappears.

The unit will automatically revert to the Surface Sequence after 2minutes if the Button is not pressed to view another Log Screen.

(����9%�*������ �-�� ��

Page 41: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

��� �:� ���� � :����Two hours after the last dive the Surface Sequence will no longerbe displayed. The Time to Fly and Time to Desaturate countdownscreens will be displayed alternately for 3 seconds each until theycount down to 0:00 or another dive is made.

If the Water Activation Contacts are wet, the graphic H2O willappear on the displays (Figs. 43/44).

To access other modes or enter settings -• Press the Button to reactivate the Surface Sequence.• The unit will again revert to the Time to Fly/Desaturate

countdowns after 2 hours, if the Button is not pressed.

The unit will shutdown when the Fly countdown reaches 00. Ifthe Wet Activation Contacts are wet, the unit will reactivate andscroll through the Surface Sequence for 2 hours then shutdownagain.

(����9'�*���"�����(�!����-�������������#���

(����99�*���"����� ������������-�������������#���

Page 42: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

����� �����The Veo 100 is configured with a RESET feature that allows data to becleared, including Nitrogen calculations and Log Mode entries.

&����$' � 1 � 25� ( 2 !�) 2�! 1�;1 >� �� �1 5�(2 ( 4 ����) !�) ���!��� ! ;/ �, 120 !�) ( ���3!( 1�3� �� 1 (���1 ��D�(/ �� �( ! 2�,�

�������������• While the Surface Sequence is scrolling, press and release the button

to access the Log Mode displaying the first screen (Dive Identifier) ofthe most recent dive.

• Press and release the button again to access the second screen (DiveData) of the most recent dive.

• Press the button for more than 4 seconds while the second Log screenof the most recent dive is being displayed to access the Reset Mode.The graphics CLR and iD will appear with the Key Code 0101, thefirst digit flashing (Fig. 45).

• If necessary to change the first digit, press and release the buttonrepeatedly to advance to the correct number.

• Press the button for more than 2 seconds to advance to the second 2digits, flashing.

• If necessary to change the second 2 digits, press and release thebutton repeatedly to advance to the correct number.

• Once the proper Key Code 101 has been entered, pressing thebutton for more than 2 seconds will shut down the unit (i.e., resettingit). If an incorrect Key Code number has been entered, the unit willrevert to the Surface Sequence, resuming previous operation(s).

(����9:�*��������$����

Page 43: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

�������

&����$' �(��( �� !�)��* +��, �, � � �--. /��0�1� 231� ( 2! 2�! ��! (1�2�! �, �� 2��� ��) ��04�� ( �25 �/ 2�! � 5 ( �� #2��23 +,��, 4(�6)�! 1 �04�(�2�� &2(���*1 2�! �25 �/ � ��00 �!26����1 21 + 33 21 * � (23 4(�!��� ��5�(02�����

Page 44: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

��� �� ������$Protect your Veo 100 from shock, excessive temperatures,chemical attack, and tampering. Protect the Lens againstscratches with an Instrument Lens Guard/Protector. Smallscratches will naturally disappear underwater.

• Soak and rinse the Module in fresh water at the end of eachday of diving, and check to ensure that the areas around theLow Pressure (Depth) Sensor (Fig. 46a), Interface Port (Fig.46b), and Button are free of debris or obstructions.

• To dissolve salt crystals, use lukewarm water or a 50%white vinegar/50% fresh water bath. After removal fromthe bath, place the Module under gently running fresh waterand towel dry before storing.

• Transport your Veo 100 cool, dry, and protected.

����������� �� �������Your Veo 100 should be inspected annually by an Autho-rized Oceanic Dealer who will perform a factory prescribedfunction check and inspection for damage or wear. To keep the2 year limited warranty in effect, this inspection must be com-pleted one year after purchase (+/- 30 days).

Oceanic recommends that you continue to have this inspectionperformed every year to ensure it is working properly. The costsof annual inspections are not covered under the warranty.(����9;�*�$��� �6

Page 45: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

�� �;�2�� � ()�� 'Take your Veo 100 to an Authorized Oceanic Dealer or send itto the nearest Oceanic Regional Distributor Facility (see page58).

To return your Veo 100 to Oceanic:• Record all dive data in the Log. All data will be erased

during factory service.• Package it using a protective cushioning material.• Include a legible note stating the specific reason for return,

your name, address, daytime phone number, serial number,and a copy of your original sales receipt and WarrantyRegistration Card.

• Send freight prepaid and insured using a traceable method tothe nearest Oceanic Regional Distributor Facility or to Oce-anic USA.

• If shipping to Oceanic USA, obtain an RA (Return Authoriza-tion) number by contacting Oceanic at 510/562-0500 orsend an e-mail to [email protected].

• Non-warranty service must be prepaid. COD is not ac-cepted.

• Additional information is available at the Oceanic web siteOceanicWorldwide.com ResponsibleResponsible

Page 46: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�%

#����� ��#��� ��# 8���If the Module is in a Console, bend the rubber Console Bootback to expose the edge of the Module. If the Boot is flexibleenough to permit, you may bend it back far enough to scoopthe Module out with your finger. Otherwise, it may be neces-sary to insert a blunt screwdriver until the tip rests just under-neath the Module. DO NOT pry the Module from the Console!Slowly increase the pressure under the Module by releasing thetension on the rubber Boot. The Module will slide up thescrewdriver and exit the Console.

If the Module is in a Wrist Boot, it will be necessary to peel thelips of the Boot downward off the Module while applyingpressure from underneath, working it out slowly.

������' �, 4(�� !�( �,2� 5�33�+1 0�1� ; �3�1 3/ 2!, ( ! ��� �202* !� �� �04(�4 ( 82�� (/( 432� 0 �� �1 ��� ��) ( ! ;/ �, 3�0�� ! � / 2(+2((2��/�

8����� ������#���The Battery Compartment should only be opened in a dry andclean environment with extreme care taken to prevent theentrance of moisture or dust.

RE

SP

ONSIBLE

DIV

ER

Page 47: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

To prevent formation of moisture in the Battery Compartment, it isrecommended that the Battery be changed in an environmentequivalent to the local outdoor temperature and humidity (e.g.,do not change the Battery in an air conditioned environment,then take it outside during a hot sunny day).

����' �5 �, �3! 82�� (/ �2� ; ( 0�) ! 2�! �, � +�� ��1 (� ! +��,�� 7 1 ���!1. ���(�* � �23��32����12�! 1 ����*1. +�33 ; ( �2�� ! 5�( ( 4 ����) !�) 1�

82�� (/ :2��, � 0�)23• Locate the Battery Compartment on the back of the Module.• While applying steady inward pressure on the center of the

Battery Hatch, rotate the Hatch Retaining Ring 10 degreesclockwise by pressing against the upper tab of the RetainingRing with a small blade screwdriver (Fig. 47).

• Lift the Hatch Ring up and away from the Housing, or turn theModule over to allow the Ring to drop out into your hand.

• Remove the Battery Hatch.

82�� (/ � 0�)23• Remove the Retaining Bar located across the lower portion of

the Battery (Fig. 48a).• Remove the Hatch O-ring. DO NOT use tools• Using care not to damage the Battery Contacts (Fig. 48b/c),

slide the Battery up and out of the Battery Compartment.

(����9+�*��������������

(����90�*�=������"�-�

Page 48: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�7

��14 �����• Closely check all of the sealing surfaces for any signs of

damage that might impair proper sealing.• Inspect the Button, Lens, and Housing to ensure they are not

cracked or damaged.• If it is necessary to clean the Battery Compartment, flush it

and all components with a solution of 50% white vinegar and50% fresh water. Rinse with fresh water, and allow to dryovernight, or blow dry with a hair dryer (set at 'no heat').

&����$' �5 !202* �( ��((�1��� �1 5���!. ( ��(�/��( � � �-- �� 2� ��,�(�A ! �� 2��� � 23 (. 2�! ����� 2�� 04� �� �1 �� ����3 �� ,21 ( � �) ! 52���(/4( 1�(�; ! 1 ()�� �

82�� (/ ��1�2332����• Slide a new 3 volt type CR2450 Lithium Battery, negative (-)

side down into the Battery Cavity. Slide it in from the rightside and ensure that it slides under the contact clip on the leftrim of the cavity (Fig. 49).

• Orient the Retaining Bar across the lower portion of theBattery and carefully push it down into position (Fig. 50).

(����9��*����������� ����!

(����:��*������������������ �

Page 49: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�9

��

��

82�� (/ :2��, 2�! :2��, � �2����* ���* ��1�2332����• Replace the Hatch O-ring with a new one which must be a

genuine Oceanic part that can be purchased from an Autho-rized Oceanic Dealer. Use of any other O-ring will void thewarranty.

• Lightly lubricate the new Hatch O-ring with silicone greaseand place it on the inner rim of the Battery Hatch (Fig. 51).Ensure that it is evenly seated.

• Slide the Hatch Retaining Ring, top portion first (small open-ing), onto your thumb.

• Carefully place the Battery Hatch (with O-ring) into positionon the rim of the Battery Compartment, then press it evenlyand completely down into place with your same thumb.

• Maintain the Battery Hatch securely in place and, using yourother hand, slide the Retaining Ring down off your thumb andinto position around the Battery Compartment.

• The tabs on the Retaining Ring fit down into the two slotslocated at the 2 and 8 o'clock positions.

• Using your fingers, turn the Ring counter clockwise 5 degreesuntil the tabs engage (Fig. 52), then tighten it 5 more de-grees by turning it counter clockwise with the aide of a smallblade screwdriver (Fig. 53).

• While tightening the Retaining Ring, exert continuous inwardpressure on it until it is secured in the proper position. Asmall symbol located on the Ring should be aligned with theLocked symbol located on the Housing (Fig. 53 a)

(����:��*7*�����7���������

(����:'�*���������������������

(����:%�*@�������������������

Page 50: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�-

��14 �����• Activate the unit and watch carefully as it performs a full

diagnostic and battery check, and enters Surface Mode.• Observe the LCD display to ensure it is consistently clear and

sharp in contrast throughout the screen.

&����$' �5 �, ( 2( 2�/ 4�(����1 �5 �, !�1432/0�11��* �( 244 2(��* !�0. �( �5 2 ��+ 82�� (/ ���!�6���� �1 ��!��2� !. ( ��(� /��( � � �-- �� 2� ��,�(�A !�� 2��� � 23 ( 5�( 2 ��043 � )23�2���� ; 5�( 2�� 04���* �� �1 ���

��������$ �:� #����� �� 8���• If the Boot was fitted with a Spacer and it was previously

removed, replace the Spacer into the Boot.• Orient the Module over the opening in the Boot, and dip the

bottom edge into it while pressing the top edge with the palmof your hand. Stop pressing when the bottom edge of theModule has just entered the Boot.

• Correct the alignment of the Module as needed so that it isstraight.

• Press the Module completely into place with your thumbs,watching the alignment, until it snaps into place.R

ES

P

ONSIBLE

DIV

ER

Page 51: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

����' �, & � ���)2���� ����2��1 2( 3��2� ! ���, 1� 0 �5 �, 8����� 2�! �� 0 �23 ���1 3��2� ! ���, �2�2 ��(� �� �, 3 5� 1�! �5 �, #�!�3 � �, #�!�3 �1 ! 1�*� ! 5�( �1 �� 2 8��� �,2� ,21 2��4 ���* �� �, 3 5� 1�! +,��, <4�1 1 �, ���1 �2�!1�! & � ���)2���� ����2��1" �� +2� ( �4�� �00 (61����

&����$' �5 �, � � �-- �1 ��1�233 ! �� 2 8��� �,2�!� 1 ��� ,2) �, 1�! �4 ���* +, ( �, 1�! & ����)2���� ����2��1 2( 3��2� !. �, ���� 02/ ���2���)2� 2���02���233/ �4�� ! 1� �!��* �� 2 !�) �

���E������ ���� � �������� ����#����If your Veo 100 stops working for any reason, it is important thatyou have anticipated this possibility and are prepared for it.This is an important reason for not pushing the nodecompression limits, and a critical reason to avoidentering decompression.

If you dive in situations where your trip would be ruined or yoursafety would be jeopardized by losing the use of your Veo 100,a backup instrument system is highly recommended. R

ES

P

ONSIBLE

DIV

ER

Page 52: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

������� ��#��������

Atmospheric pressure decreases as Altitude increases above sea level. Weather systemsand ambient temperature also affect barometric pressures. Consequently, depth readinginstruments that do not compensate for the decrease in ambient pressure indicate depthreadings shallower than the depth they are actually at.

The Veo 100 automatically compensates for decreased ambient pressures for Altitudesbetween 2,000 (610 meters) and 14,000 feet (4,270 meters). Its program contains a highaltitude algorithm that reduces no decompression limits to add a larger zone of caution.

The Veo 100 senses ambient pressure when it is activated, every 15 minutes while it isactivated, or every 30 minutes when it is not activated. At an Altitude of 2,000 feet (610meters), it will automatically recalibrate itself to measure depth in feet of fresh water ratherthan feet of sea water. It will then readjust the no decompression limits at additionalintervals of 1,000 feet (305 meters). Therefore, when returning to lower Altitudes, divingshould not be conducted until the unit automatically clears of any residual nitrogen loadingand resets to operate at the new lower Altitude.

&����$' �, � � �-- +�33 ��� 1 �1 20;� �� 4( 11�( 1 �( 4(�)�! 3����! ��04 �12���� +, � �� �1 + �� �� ��� !�) 2� 2�/ !�55 ( �� 3����! ����3 �, ���� 1,��1 �55 2�! �1 ( 2���)2� ! 2� �, � + 3����! �

�5 �, ���� �1 2���)2� ! 2� 3 )2����1 ,�*, ( �,2� ��.--- 5 � ��.��- 0 � (1". ��+�33 4 (5�(0 2 !�2*��1��� �, �? 5�33�+ ! ;/ �00 !�2� 1,��!�+��

Page 53: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

��������������A ����$�"�����A ������ ���������)��"��

������� �����������)(1(9A &��4���=�������������"A �%� ���������"���"����

�)*)��)(+9A �-����.������������������!�� .����*�������)

,�#���

�+76/72).:+9A ���������"���"������4��"����"��������.������B�

C&D�-����:E���E�%�E�9�E�0�E��%�E��;�E�%��E�%9�E�'%�E�9��E�90�

A ����������������4������"������A ;��"���������4�����������������4�����"���"����

4���������;��"������A ���������"���"��������6��������%9�������4���

�����-�

�+:/247+((1/.��)4);1-1*1+(�$(*/4�:+1-1.<(%9A ��E�%�E�'�E�9�E�:�E���;��4���

�'E�;E��E��%E��:E����0�"������

�-*1*80+��-</71*529A ������37��������

�� ������������$�� ����%A ����-����) ��������A .��4��A ,����'���������4����)������:+�"������A ��"�����(�!�$�����#�A ����������$�����#�A �-������������4���E� ��A $�����������A .���&��1

A��<������4�&��������"������)�&������A��=����(��"����%�)�%9�A����"���=���E�&������A�� ����F��E�&����E� !�A�� �����������&����7��)�744�A��>��������-������7��)�744�

�� ������������$�� �%

3�� ���"��������� �-�1A &���?�E�?%E����?'A .4��!�.���

�����������&��1

���"��������� �-�1A &��E����������?�E����������?%

���������*�$��������E� ��!�E�����""����)����

������������

Page 54: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

�������� ����� �������

�82+71:��1(4-)3(9 ����1 ����������1A �-��3�"��� ������% �A ���� �����'���4����%��"� ��4������"�)��"�G������A &2�"�"� ���� '���4����%��"� ��4������")��"�G������A �-����"����"����� �1�������1:����1"�� ��"�����A ��������������"� �1�������1:����1"�� ��"�����A .4��!�.������"� '1�������1���"��1��� �������A ���"���������.������"� �1�������1:����1"�� ��"�����A @����� �-����"� �1�������1:����1"�� ��"�����A .��4�����"� �1�������1:����1"��H ��"�����

�H���������*����%'�*�������!�A �-������.��4��������-� �1������%'1:����1"�� ��"�����A ��"�����(�! %'1:������1�����1"��H ��"�����

�H������������"���4���������-��A ��"����� ������� %'1:��"2�"�"�����1�����1"��H ��"�����

�H������������"����4���������-��

A ��"������� �������I(��*�����;�I$� �I

�4+:1)-��1(4-)3(9 7���������A ��������� ����! �4����&��������-����A 7����4�������*�*�*� G''�)'���4�����G����)�%��"������A �����&���$�����#����"�� %'1:������1�����1"����4����-��������

������������ ����������"

Page 55: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

�� �� ����

�1((8+��/)01.<��)7��7)459 ���"����A 3�� ���"���������J����������� :A 3�� ����$������J�����!����#� %A ���"���������>������J�������� �

)71);-+��(:+.*� )*+��.01:)*/79 ;��4������0�"��8�.����#�� ����������;��4������0�"�

���"���� 4���)"�� "�����)"�� ���"���� 4���)"�� "�����)"��� ��*��� ��*�' � ��*�%� ��*�;

A 3��"��K����������� � ���*�%: '�:�*�+�: � %��*�:� ;�:�*��:A $������K�����F����#� � %;�*�'� 0�*�� � :��*�;� �:�:�*��0A ����(���K��������*�4���� � G�'� G�� � G�;� G��0

�� ��������� � �����

�8.:*1/.9 ������!1A ���� L�M��4�4��������A ��"��� ������������!

�1,+��/8.*+79A ����!�� �-���?������%E����4�����-��"��!��A ���������� �-��?�E�������-�������#����-�����������

�1,+��/<��/0+9A .�������%�"������������-������"�"��!�4���-��#���A �4�����%��-��E����'����-�����"�"��!��������������4������-�

������������ ����������"

Page 56: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�%

������������ ����������"

�� ��������� � ������$:/.*1.8+0%

�-*1*80+9A 7���������4��"������-�������9E����4�����9E%;+�"����������-����A &�������"����������������-��!�'��"���������#����"����!����-�������#����#��������������������A $�"��������4�����������#����"����!����-���������"����������4����-����!��""����������#����A $�"������������������%E����4�����;���"����������-��������-��!��E����4�����'�:�"�������������

�/=+79A�� ����! ��*�'�-�E�$�%9:�E�������"������!A��.���4���4� <�����:�!���A��������"��� <������������������������""����A����4���2������! �����-����������4���*���������-�������-��!�E�'�����������4�'�*���������-��������-��!�

�)**+73���.01:)*/79 ���"����� ����!� ����"�����#��� ��"������� %:�������M��������� N�%:M

�:*1,)*1/.9A &����*������������������""����A ����"����*��!��""����������#����������6����4�����73�A =%7����������������>���$����������������������"���������������������������������������A $��������"����!����-�������������9�4�������%�"������E��4�����>��������-�����4�������������7((�

A $�����������-��������-������������������9E����4�����9E%+��"�������58*/669A ����"�����!��������44��4�����-�����"��#�������%��"�������4��������������-������������-�������/�����A ����"�����!��������44�%9�������4���������-���#���������-����4�����=%7���������������!���

A $��������������44�"����!�4+7)*1.<��+24+7)*87+9A 7����4�����#����*����#����%��I(����9��I(��*;���;��I$�A �������#����*����#����%0�I(����:�I(��*%���;��I$��

Page 57: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

��

����������(optional items available from your Authorized Oceanic Dealer):• Lens Guard - covers the lens face, prevents scratches• Battery Kit - includes 1 Battery, 1 Battery Hatch O-ring, Silicone Grease

_____________________________________________________________________________

�����

Page 58: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�7

������ &���� &���

�������������� ���������

���� ��������������������� �!�"#����$ %���� �!�"�#����

&�'��������(��)�!!***+�,� ��,&����*���+,�-

�,� ��,�.��- �/��#���0��'��1��.��- �/�������#� #2�#""2���$ %����#� #2 #���

�#- �����33�,�4�,� ��,+��

�,� ��,��0�(��0��)���#��.���� ���� �/�������2�#� �#52�#� ��$ %����2�#� �#52�#�#��

�#- ����( *��+� ���/4�,� ��,��+��

�,� ��,�&�������#����������������6��1��-�������# #���#5�# 5 ���$ %����# #���#5�# ���

�#- ������3�4�,� ��,07+,�-

�,� ��,�$� �,���#��8 ���������$� �,������22#�� #�#�#�����$ %��22#�� #�#2�#5"

�#- �����,� ��,3� �,�4* � ���+3�

�,� ��,������� ���� ��9: ,�3�,;��#��6 )������< * �������5�5#"5#��55��$ %��5�5#"5# �"5�#- �����,� ��,(�4�,� ��,0� +,�-�,� ��,������1��0��� �� �:�/+����

���������=�,���� ���0��� �� �����" #2#��5�#������$ %��" #2#��5�#�2��

�#- ����� ���4�,� ��, 0�+,�-+ 0

�,� ��,���� #: ,�3�,�:��+������#����1 )��������"�#���#25�2��$ %��"�#���#2�����#- ������3�4�,� ��, �� +,�-+�1

�,� ��,�> ) ���#��?�7�( - ��> ) ���������#���#""� ��$ %�����#���#""�2

�#- �����,� ��,41��+,�-

�,� ��,���*�@� � ��&�����1�������*�@� � ��

�����"�#�#��#�22�����$ %��"�#�#��#�22�

Page 59: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

�9

��������������������������

� (�23 ��0; ( FFFFFFFFFFFFFFFFFFFFFFF

�2� �5 4�(�,21 FFFFFFFFFFFFFFFFFFFFF

��(�,21 ! 5(�0 FFFFFFFFFFFFFFFFFFFFFF

8 3�+ �� ; 5�33 ! �� ;/ 2� ��,�(�A ! �� 2��� � 23 ('

RE

SP

ONSIBLE

DIV

ER

�2� � ()�� � (5�(0 ! � 23 ( = � �,����2�

Page 60: OCEANIC...Oceanic, the Oceanic logo, Veo 100, the Veo 100 logo, Graphic Diver Interface, Tissue Loading Bar Graph, Pre Dive Planning Sequence, Variable Ascent Rate Indicator, Set Point,

OCEANIC® USA2002 Davis Street

San Leandro, CA 94577Tel: 510-562-0500Fax: 510-569-5404

http://www.OceanicWorldwide.com

© 2002 Design, 2002 Doc. No. 12-2373-r03 (11/15/04)