Consider for • H Frames • Stamping • Part Engagement Available on H, LH, and A Series Cylinders ISO 9001 REGISTERED Specials are Our Standard Non-Rotating Specialty Cylinders Perfect for applications where the rod end must maintain a specific orientation stroke after stroke
4
Embed
Non-Rotating Specialty Cylinders - Milwaukee Cylinder · SPLINE SHAFT SPLINE SLEEVE GUIDE ROD In standard cylinders, pistons and cylinder rods are not constrained from rotating around
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Consider for• H Frames• Stamping• Part
Engagement
Available on H, LH, and A Series Cylinders
ISO 9001REGISTERED
Specials are Our Standard
Non-Rotating Specialty Cylinders
Perfect for applications where the rod end must maintain a specific orientation stroke after stroke
2
Non-Rotating Specialty Cylinders
SPLINE SHAFT
FEATURES:• All cylinder series
• Cushioned or non-cushioned cylinders
• All bore and rod combinations except ⅝" diameter rod
• Spline shaft and mating sleeve prevent natural rotation of piston rod during stroke
• Mounting styles 11, 21, 31, 35, 41, 42, 43, 71, 72, 73. Consult factory for other mounting styles
• Engineering dimensional drawing provided with each cylinder ordered
NOTE: Not available in double rod end cylinders or with stroke lengths over 45 inches. Rotational limits or torsional load information must be supplied to factory. Refer to standard brochures for cylinder features.
PROBLEM
GUIDE ROD
FEATURES:
• All cylinder series
• Cushioned or non-cushioned cylinders
• All mounting styles
• Double rod end cylinders
• All bore and rod combinations 8-inch bore and larger
• Guide rod design through piston prevents natural rotation of piston rod
• Engineering dimensional drawing provided with each cylinder ordered
NOTE: Rotational limits or torsional load information must be supplied to factory. Refer to standard brochures for dimensions and cylinder features.
SPLINE SHAFT SPLINE SLEEVE
GUIDE ROD
In standard cylinders, pistons and cylinder rods are not constrained from rotating around the rod axis. Consequently, the orientation of the rod end may change from one stroke to the next. For many applications, this may not be desirable.
3
Non-Rotating Specialty Cylinders
BORE DIAMETER ROD DIAMETER AVAILABILITY
1½⅝ N/A
1 N/A
2
⅝ N/A
1 N/A
1⅜ N/A
2½
⅝ Yes
1 N/A
1⅜ N/A
1¾ N/A
3¼
1 Yes
1⅜ N/A
1¾ N/A
2 N/A
4
1 Yes
1⅜ Yes
1¾ Yes
2 N/A
2½ N/A
5
1 Yes
1⅜ Yes
1¾ Yes
2 Yes
2½ Yes
3 N/A
3½ N/A
6
1⅜ Yes
1¾ Yes
2 Yes
2½ Yes
3 Yes
3½ Yes
4 N/A
7
3 Yes
3½ Yes
4 Yes
4½ Yes
5 N/A
SOLUTION
Milwaukee Cylinder offers Custom Non-Rotating Solutions for H, LH, and A Series cylinders. Ask your Milwaukee Cylinder representative about our Spline Shaft technology or Internal Guide Rod technology.