Neapco Driveline & Axle Parts Catalog...cardan universal joint replacement shafts for the early failures experienced with 6-ball constant velocity-style high-speed propshafts. Specialty

DrivelineCatalog

Innovative Drivetrain Solutions®

https://www.carid.com/neapco/

Slip YokeSNEAPCO slip yokes are manufactured from alloy steel

forgings and ductile castings for increased strength. Spline

forms are manufactured through broaching operations that

produce industry leading mating part fits. The tight toler-

ance of these spline fits coupled with reduced end play uni-

versal joints reduce time at the dynamic balancing opera-

tion and produce high-quality, vibration-free driveshafts.

Stub ShaftSNEAPCO stub shafts are manufactured to bearing toler-

ances from micro-alloy steel forgings. Our expertise in heat

treat produces a consistent case-hardened surface in the

critical wraparound area in the base radius. This increases

the material strength and eliminates component failures.

Spline forms are designed to eliminate hinging and runout

when mated with our slip yokes. Mid-ship stubs feature

precision ground diameters for center bearing press fit. Slip

stubs feature Dura-Slip™ low-friction, wear-resistent nylon

coating which provides long service life and reduced NVH

in complex driveshaft assemblies.

end YokeSNEAPCO provides extensive coverage of outboard,

mid-ship, transmission, differential, and constant velocity-

style end yokes. These end yokes are available in both

full round and half round easy service designs. Straight

side and involute spline tooth forms are offered. Cover-

age includes 1000 series auxiliary drives, light & medium

duty series, and 1610-1810 heavy duty products. Total part

numbers exceed 200 SKus ranging from pickup trucks to

over-the-road trucks.

Center SupportSNEAPCO offers a full line center support bearing program

featuring sealed bearings that are pre-lubricated before

packaging. The center support product line provides cover-

age for light duty pickup and vans, medium duty class 4

through 6 trucks and delivery vehicles, and heavy duty class

7 & 8 over-the-road and off highway trucks.

CV head aSSemblieSNEAPCO offers the broadest coverage of double-cardan

CV head assemblies. Many of these feature our proprietary

lubrication system in the critical centering mechanism. This

design produces improved grease flow to the important

linkage between the CV yokes. The universal joint lock-up

relationship to the pilot diameter and ball stud tube diameter

reduces driveshaft runout which eliminates vibrations.

auxiliarY/induStrial driVeShaftSNEAPCO’s selection of auxiliary/industrial driveshafts is one

of the most extensive in the industry. For truck-mounted,

shaft-driven hydraulic systems, NEAPCO offers single and

two-piece shaft options. Our exclusive Flex-Bell™ adjustable

shielding system is designed for the tight spaces found on

mobile equipment and provides a safety factor that no com-

petitive program can match. There is a crankshaft-driven

shaft system for snowplow and other front-mount machine

applications. A selection of standard- length industrial

driveshafts that are welded and balanced are also available.

unwelded driVeShaft aSSemblieSunwelded driveshaft assemblies are designed to allow service

of a large cross section of OE and custom applications from

a consolidated group of key driveline series sub-assemblies.

These kits are constructed with extended tubing sections

that can be cut to the required length, welded, and dynami-

cally balanced in a local facility. This will produce an entirely

new driveshaft with no used components while greatly

reducing the SKu inventory required to support targeted

vehicle populations. Coupled with on-the-spot availability,

these assemblies are a viable option for volume shaft

replacement.

SpeCialtY driVeShaftSNEAPCO supports a wide variety of custom, conversion,

and niche specialty driveshafts. These include traditional

cardan universal joint replacement shafts for the early

failures experienced with 6-ball constant velocity-style

high-speed propshafts. Specialty driveshafts for use in retro

fitting vehicles that have been modified from the original

OE driveline design or that have modified suspension are

a key strength of the NEAPCO program allowing you to

provide solutions to previously unserviceable problems.

https://www.carid.com/driveline-axles.html

ii

TABLE OF CONTENTSSection Section Name Sub Section Page

1 Companion Flange 1-2

1-8

2 Flange Yoke 2-2

2-3

2-6

2-7

2-8

2-9

3 Slip Yoke 3-2

3-3

3-4

3-7

3-11

3-16

4 End Yoke 4-2

4-10

4-12

4-13

4-14

4-20

4-22

Standard Flange

Large Flange

Inside Lock-Up

Outside Lock-Up

Bearing Plate Construction

C.V. Flange Adapter

C.V. Outside Lock-Up

C.V. Inside Lock-Up

Transmission Flange Sleeve

Sleeve

Non Splined Slip Yoke

Splined Slip Yoke

Transmission Slip Yoke

Bearing Plate Construction

PTO - Non Splined Bore

PTO - Splined Bore

Splined CV

Splined U-Bolt

Splined Bearing Strap

Splined Bearing Plate

Splined Wing - RPL

Steering Clamp 4-23

iii


5 Center & Tube Yoke C.V. Ball Stud Tube Weld Yoke 5-2

C.V. Centering Yoke 5-5

Center Yoke (“H” Yoke) 5-6

Inside Lock-Up - Steel 5-8

Outside Lock-Up - Steel 5-9

Outside Lock-Up - Aluminum 5-12

Bearing Plate Construction 5-13

PlateLock Construction 5-14

6 Shafting / Tubing / Yoke & Tube Assembly

Solid Shafting 6-2

Auxiliary P.T.O. Shafting and Tubing 6-6

Drive Shaft Tubing - Aluminum 6-8

Drive Shaft Tubing - Steel 6-9

Yoke and Tube Assembly 6-12

7 Stub Shaft C.V. Flange Stub 7-2

Splined Mid-Ship 7-3

Splined Cap Screw & Shaft Nut 7-4

Slip Stub 7-5

8 Yoke Shaft Inside Lock-Up 8-2

Outside Lock-Up 8-3

Bearing Plate Construction 8-4

Plate Lock 8-5

iv

Section Section Name Sub Section Page

9 Driveshaft & Double Cardan C.V.

Double Cardan C.V. Repair Kit 9-2

Double Cardan C.V. Head Assembly 9-4

Double Cardan C.V. Head Components 9-5

PTO / AUX Shaft 9-10

PTO / AUX Shaft Components 9-11

Drive Shaft - Steel 9-18

Drive Shaft Components - Steel 9-19

Drive Shaft - Aluminum 9-20

Drive Shaft Components - Aluminum 9-21

PTO/AUX Shaft Shielding System 9-22

10 Small Parts Driveline Weight 10-2

Increasing Bushing 10-3

Pilot Reducer 10-4

Dust Seal 10-4

Welch Plug 10-5

Miscellaneous Hardware 10-6

Miscellaneous Fasteners 10-8

Driveshaft Boot 10-8

Centering Tool 10-10

11 Center Support Dimensional Listing by Bearing ID 11-2


12 Wing Bearing Driveline Products

End Yoke 12-2

Slip Yoke 12-3

Stub Shaft 12-4

Tube Weld Yoke 12-5

Yoke Shaft 12-6

13 General Information Universal Joints 13-3

Driveline Components 13-4

Driveline Fabrication 13-12

Aluminum Components 13-20

PTO Components 13-22

Trouble Shooting Guide 13-25

Glossary 13-27

1-1

CO

MPA

NIO

N F

LAN

GE

Companion Flange1

● Standard Flange● Large Flange

1-2

COMPANION FLANGE

NEW PARTS

STANDARD FLANGE

A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length

Outside Dia. Part Number

1000 Series (Mating flange yoke 10-0229)

Stan-dard

1000 1.125 — 0.25 — 2.25 2.75 0.32 4 0.38-16

2.12 3.50 N10-1-1022-2

Stan-dard

1000 1.250 — 0.31 — 2.25 2.75 0.32 4 0.38-16

2.12 3.50 N1-1-273

1310 Series (Mating flange yoke N2-2-329: use bolt kit N131F)

Stan-dard

1310 0.750 1.688 — 0.38 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313

Stan-dard

1310 1.000 — 0.25 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-1

Stan-dard

1310 1.125 — 0.25 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-2

Stan-dard

1310 1.250 — 0.25 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-3

Stan-dard

1310 1.250 — 0.31 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-4

Stan-dard

1310 1.375 — 0.31 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-5

Stan-dard

1310 1.375 — 0.38 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-6

Stan-dard

1310 1.438 — 0.38 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-7

Stan-dard

1310 1.500 — 0.38 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-8

Stan-dard

1310 1.625 — 0.38 — 2.38 3.12 0.39 4 0.38-16

2.00 3.88 N2-1-1313-9

1-3

CO

MPA

NIO

N F

LAN

GECOMPANION FLANGE

NEW PARTS

STANDARD FLANGE (Cont’d)

A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1350-1410 Series (Mating flange yoke 1350:N3-2-119 1410:N3-2-159: use bolt kit N135F)

Stan-dard

1350-1410

1.000 — 0.25 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-1

Stan-dard

1350-1410

1.000 1.880 — 0.50 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013

Stan-dard

1350-1410

1.125 — 0.25 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-2

Stan-dard

1350-1410

1.250 — 0.25 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-3

Stan-dard

1350-1410

1.250 — 0.31 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-4

Stan-dard

1350-1410

1.375 — 0.31 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-5

Stan-dard

1350-1410

1.375 — 0.38 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-6

Stan-dard

1350-1410

1.438 — 0.38 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-7

Stan-dard

1350-1410

1.500 — 0.38 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-8

Stan-dard

1350-1410

1.625 — 0.38 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-9

Stan-dard

1350-1410

1.750 — 0.38 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-10

Stan-dard

1350-1410

1.875 — 0.38 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-11

Stan-dard

1350-1410

1.875 — 0.50 — 2.75 3.75 0.45 4 0.38-16

2.00 4.56 N3-1-1013-12

1-4

COMPANION FLANGE

NEW PARTS


A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1480-1550 Series (Mating flange yoke 1480: N3-2-479 1550: N4-2-669: use bolt kit N148F)

Stan-dard

1480-1550

1.250 2.438 — 0.62 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133

Stan-dard

1480-1550

1.500 — 0.38 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-1

Stan-dard

1480-1550

1.750 — 0.38 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-3

Stan-dard

1480-1550

1.875 — 0.38 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-4

Stan-dard

1480-1550

1.875 — 0.50 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-5

Stan-dard

1480-1550

2.000 — 0.50 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-6

Stan-dard

1480-1550

2.125 — 0.50 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-7

Stan-dard

1480-1550

2.250 — 0.50 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-13

Stan-dard

1480-1550

2.250 — 0.62 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-8

Stan-dard

1480-1550

2.375 — 0.62 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-9

Stan-dard

1480-1550

2.438 — 0.62 — 3.75 4.75 0.51 4 0.50-13

2.50 5.88 N4-1-1133-10

1-5

CO

MPA

NIO

N F

LAN

GECOMPANION FLANGE

NEW PARTS


A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1610 Series (Mating flange yoke N5-2-279: use bolt kit N161F)

Stan-dard

1610 1.250 3.000 — 0.75 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873

Stan-dard

1610 2.000 — 0.50 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-1

Stan-dard

1610 2.250 — 0.62 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-3

Stan-dard

1610 2.375 — 0.62 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-4

Stan-dard

1610 2.438 — 0.62 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-5

Stan-dard

1610 2.500 — 0.62 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-6

Stan-dard

1610 2.750 — 0.62 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-7

Stan-dard

1610 3.000 — 0.75 — 6.62 6.12 0.39 8 0.50-13

3.50 6.88 N5-1-873-9

1-6

COMPANION FLANGE

NEW PARTS


A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1710 Series (Mating flange yoke N6-2-749)

Stan-dard

1710 1.250 4.000 — 1.00 7.75 7.25 0.39 8 4.00 8.00 N6-1-1253

Stan-dard

1710 2.000 — 0.50 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-9

Stan-dard

1710 2.250 — 0.62 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-11

Stan-dard

1710 2.438 — 0.62 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-1

Stan-dard

1710 2.500 — 0.62 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-2

Stan-dard

1710 2.750 — 0.62 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-3

Stan-dard

1710 2.938 — 0.75 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-4

Stan-dard

1710 3.000 — 0.75 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-5

Stan-dard

1710 3.500 — 0.88 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-6

Stan-dard

1710 3.938 — 1.00 — 7.75 7.25 0.39 8 0.50-13

4.00 8.00 N6-1-1253-7

1-7

CO

MPA

NIO

N F

LAN

GECOMPANION FLANGE

NEW PARTS


A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1810 Series (Mating flange yoke N6.5-2-329)

Stan-dard

1810 1.250 4.000 — 1.00 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533

Stan-dard

1810 2.438 — 0.62 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-1

Stan-dard

1810 2.500 — 0.62 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-2

Stan-dard

1810 2.750 — 0.62 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-3

Stan-dard

1810 2.938 — 0.75 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-4

Stan-dard

1810 3.000 — 0.75 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-5

Stan-dard

1810 3.500 — 0.88 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-6

Stan-dard

1810 3.938 — 1.00 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-7

Stan-dard

1810 4.000 — 1.00 — 7.75 7.25 0.45 12 0.50-13

4.00 8.00 N6.5-1-533-8

1-8

COMPANION FLANGE

NEW PARTS

LARGE FLANGE

A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length



Large 1310 1.375 2.375 — 0.62 2.38 3.12 0.38-24

4 0.38-16

2.50 3.88 N2-1-1323

Large 1310 1.750 — 0.38 — 2.38 3.12 0.38-24

4 0.38-16

2.50 3.88 N2-1-1323-1

Large 1310 1.875 — 0.38 — 2.38 3.12 0.38-24

4 0.38-16

2.50 3.88 N2-1-1323-2

Large 1310 1.875 — 0.50 — 2.38 3.12 0.38-24

4 0.38-16

2.50 3.88 N2-1-1323-3

Large 1310 2.000 — 0.50 — 2.38 3.12 0.38-24

4 0.38-16

2.50 3.88 N2-1-1323-4

Large 1310 2.125 — 0.50 — 2.38 3.12 0.38-24

4 0.38-16

2.50 3.88 N2-1-1323-5

1-9

CO

MPA

NIO

N F

LAN

GECOMPANION FLANGE

NEW PARTS

LARGE FLANGE (Cont’d)

A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1350-1410 Series (Mating flange yoke 1350: N3-2-119 1410: N3-2-159)

Large 1350-1410

1.750 3.000 — 0.75 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023

Large 1350-1410

2.000 — 0.50 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-1

Large 1350-1410

2.125 — 0.50 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-2

Large 1350-1410

2.250 — 0.50 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-10

Large 1350-1410

2.250 — 0.62 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-3

Large 1350-1410

2.375 — 0.62 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-4

Large 1350-1410

2.438 — 0.62 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-5

Large 1350-1410

2.500 — 0.62 — 2.75 3.75 0.44-20

4 0.38-16

3.00 4.56 N3-1-1023-6

1-10

COMPANION FLANGE

NEW PARTS

LARGE FLANGE (Cont’d)

A B C D E F G H

Flange Type

DL Series

Bore Dia.

Bore Dia.

(Max)Key-way

Key-way

(Max)Pilot Dia.

Bolt Cir-cle

Hole/Thread

SizeHoles/Bolts

Set Screw Hole Size

Overall Length


1480-1550 Series (Mating flange yoke 1480: N3-2-479 1550: N4-2-669)

Large 1480-1550

2.380 3.750 — 1.00 3.75 4.75 0.50-20

4 0.50-13

3.00 5.88 N4-1-1143

Large 1480-1550

2.500 — 0.62 — 3.75 4.75 0.50-20

4 0.50-13

3.00 5.88 N4-1-1143-1

Large 1480-1550

2.750 — 0.62 — 3.75 4.75 0.50-20

4 0.50-13

3.00 5.88 N4-1-1143-2

Large 1480-1550

3.000 — 0.75 — 3.75 4.75 0.50-20

4 0.50-13

3.00 5.88 N4-1-1143-4


Large 1610 3.120 4.500 1.00 6.62 6.12 0.38-24

8 0.50-13

5.00 6.88 N5-1-883


Large 1710 3.500 5.500 — 1.25 7.75 7.25 0.38-24

8 0.50-13

6.00 8.00 N6-1-1263

1810 Series (Mating flange yoke N6.5-2-329)

Large 1810 3.500 5.500 — 1.25 7.75 7.25 0.44-20

12 0.50-13

6.00 8.00 N6.5-1-543

2-1

FLA

NG

E Y

OK

E

● Inside Lock-Up● Outside Lock-Up● Bearing Plate Construction● C.V. Flange Adapter● C.V. Outside Lock-Up● C.V. Inside Lock-Up

2 Flange Yoke

2-2

FLANGE YOKE

NEW PARTS

INSIDE LOCK-UP

G E F H

DL SeriesPilot

DiameterBolt

Circle

Hole/Thread

Size

Number Of Bolt Holes

Flange Face To CL

PartNumber

1000 Series A-2.312 B-0.938 C-1.5001000 2.25-M 2.75 0.32 4 1.56 10-0229

G E F H

DL Series

PilotDiameter

Bolt Circle

Hole/Thread

Size

Flange Face To

CL


Joint Angle Part Number

3R Series A-3.563 B-1.125 C-2.5633R 3.12-F 4.25 0.46 1.69 4 15 N3R-2-8268

2-3

FLA

NG

E Y

OK

E

FLANGE YOKE

NEW PARTS

OUTSIDE LOCK-UP

G E F H

DL Series

PilotDiameter

Bolt Circle

Hole/Thread

Size

Flange Face To

CL



1210 Series A-2.688 B-1.0631210 1.81-M 3.06 0.32 1.50 4 20 N2-2-23231210 2.00-F 3.50 0.49 1.62 4 20 N2-2-10491210 2.25-M 2.75 0.32 1.48 4 20 N2-2-899

1310 Series A-3.469 B-1.0631310 1.81-M 3.34 RE 0.32 1.62 4 15 N2-2-7991310 1.81-M 3.34 SQ 0.40 1.62 4 15 N2-2-799-11310 1.81-M 3.67 0.45 1.56 4 20 N2-2-7801310 2.00-F 3.50 0.49 1.62 4 20 N2-2-9391310 2.00-F 4.25 0.49 1.62 4 19 N2-2-13791310 2.25-M 2.75 0.32 1.62 4 15 N2-2-899-11310 2.37-M 3.12 0.39 1.38 4 20 N2-2-3291310 2.37-M 3.12 0.39 1.62 4 30 N2-2-4591310 2.37-M 3.12 0.40 1.38 4 20 N2-2-329-11310 2.56-M 3.74 0.49 1.56 4 22 N2-2-1949-11310 2.75-M 3.75 0.45 1.38 4 20 N2-2-4791310 3.63-M 2.88 0.39 1.38 4 20 N2-2-3491310 3.75-M 4.75 0.51 1.38 4 20 N2-2-5791310 3.92-M 3.39 0.32 2.31 8 20 N2-2-3921310 3.94-M 3.39 0.32 2.19 6 20 N2-2-206

2-4

FLANGE YOKE

NEW PARTS

OUTSIDE LOCK-UP (Cont’d)

G E F H

DL Series

PilotDiameter

Bolt Circle

Hole/Thread

Size

Flange Face To

CL



1330 Series A-3.875 B-1.0631330 1.81-M 3.67 0.45 1.56 4 20 N2-2-19041330 1.81-M 3.67 0.49 1.56 4 20 N2-2-27681330 2.00-F 3.50 .50 1.65 4 20 N2-2-9491330 2.00-F 4.25 0.49 1.62 4 19 N2-2-13691330 2.16-F 3.94 0.49 1.62 4 20 N2-2-1879-1

1350 Series A-3.875 B-1.1881350 2.00-F 4.25 0.49 1.62 4 20 N3-2-15791350 2.00-F 4.25 M12x1.75 1.62 4 20 N3-2-16191350 2.25-F 4.00 0.40 1.62 4 20 N3-2-51041350 2.56-M 3.74 0.49 1.56 4 20 N3-2-19491350 2.64-F 4.41 0.40 1.62 4 20 N3-2-51071350 2.68-F 4.25 M12x1.75 1.62 4 20 N3-2-16991350 2.75-M 3.75 0.45 1.56 4 20 N3-2-119

1410 Series A-4.438 B-1.1881410 2.00-F 4.25 0.50 1.65 4 20 N3-2-18191410 2.68-F 4.25 0.50 1.65 4 20 N3-2-17591410 2.68-F 4.25 M12x1.75 1.65 4 20 N3-2-17091410 2.75-M 3.75 0.45 1.69 4 22 N3-2-1591410 3.75-M 4.75 0.51 2.00 4 30 N3-2-429

2-5

FLA

NG

E Y

OK

E

FLANGE YOKE

NEW PARTS

OUTSIDE LOCK-UP (Cont’d)

G E F H

DL Series

PilotDiameter

Bolt Circle

Hole/Thread

Size

Flange Face To

CL



1480 Series A-4.438 B-1.3751480 3.75-M 4.75 0.51 2.00 4 20 N3-2-479

1550 Series A-5.250 B-1.3751550 3.75-M 4.75 0.51 2.00 4 22 N4-2-669

2-6

FLANGE YOKE

NEW PARTS

BEARING PLATE CONSTRUCTION

G E F H

DL Series

PilotDiameter

Bolt Circle

Hole/Thread

Size

Flange Face To

CL



1610 Series A-5.321 B-1.8751610 6.63-M 6.12 0.38 2.75 8 22 N5-2-279

1710 Series A-6.094 B-1.9381710 7.75-M 7.25 0.38 3.00 8 22/29 N6-2-7491710 7.75-M 7.25 0.44 3.00 8 22/29 N6-2-739

1760 Series A-7.000 B-1.9381760 7.75-M 7.25 0.44 3.38 12 30 N6.3-2-19

1810 Series A-7.547 B-1.9381810 7.75-M 7.25 0.44 3.38 12 30 N6.5-2-329

2-7

FLA

NG

E Y

OK

E

FLANGE YOKE

NEW PARTS

CV FLANGE ADAPTER

G E F H

DLSeries

Pilot Dia.

Bolt Circle

Hole/Thread

Size


Flange Face To

CL

Stud Socket Dim. Part Number

1310HR Series A-3.219 B-1.0631310HR 3.94-M 3.39 0.32 6 2.91 — N2-83-2061310HR 4.09-M 3.58 0.32 6 2.91 — N2-83-288X

2-8

FLANGE YOKE

NEW PARTS

CV FLANGE YOKE - OUTSIDE LOCK-UP

G E F H

DLSeries

Pilot Dia.

Bolt Circle

Hole/Thread

Size


Flange Face To

CL


1310 Series A-3.469 B-1.0631310 1.81-M 3.34 RE 0.40 4 1.62 0.50 N2-83-288-2X1310 1.81-M 3.34 SQ 0.40 4 1.62 0.50 N2-83-288-3X1310 1.81-M 3.58 0.32 4 1.62 0.50 N2-83-288-1X1310 1.81-M 3.67 0.45 4 1.62 0.50 N2-83-288-4X1310 2.00-F 3.00 0.37-24 4 1.62 0.50 N2-83-599X1310 2.00-F 3.50 0.49 4 1.62 0.50 N2-83-388X 11310 2.00-F 3.50 0.49 4 1.62 0.50 N2-83-543X 2

1330 Series A-3.875 B-1.0631330 2.00-F 4.25 M12x1.75 4 1.62 0.50 N2-83-631X1330 3.12-F 4.25 0.46 4 1.62 0.50 N2-83-913X

1350 Series A-3.875 B-1.1881350 2.00-F 4.25 M12x1.75 4 1.62 0.50 N3-83-024X1350 2.16-F 3.94 0.49 4 1.62 0.50 N3-83-072X1350 2.68-F 4.25 M12x1.75 4 1.62 0.50 N3-83-025X1350 3.12-F 3.97 0.46 4 1.62 0.50 N3-83-1606X1350 3.12-F 4.25 0.46 4 1.62 0.50 N3-83-3281X

1 Greasable 2 Non-Greasable

2-9

FLA

NG

E Y

OK

E

FLANGE YOKE

NEW PARTS

CV FLANGE YOKE - INSIDE LOCK-UP

G E F H

DLSeries

Pilot Dia.

Bolt Circle

Hole/Thread

Size


Flange Face To

CL


3R Series A-3.563 B-1.125 C-2.5633R 3.12-F 4.25 0.41 4 1.69 0.91 N3R-83-6273R 3.12-F 4.25 0.45 4 1.69 0.91 N3R-83-482

3-1

SLI

P Y

OK

E

● Transmission Flange Sleeve● Sleeve● Non Splined Slip Yoke● Splined Slip Yoke● Transmission Slip Yoke● Bearing Plate Construction

3 Slip Yoke

3-2

SLIP YOKE

NEW PARTS

TRANSMISSION FLANGE SLEEVE

E F G H I

DLSeries

Spline / Number

TeethBolt

Circle

Hole/Thread

Size


Pilot Dia.

Flange Face

To EndHub Dia. Part Number

1310 Series1310 1.375-

31/323.00 0.38 4 2.00-M 6.60 1.88 N2-23-9162X

1350 Series1350 1.312-

29/304.25 0.44-20 4 3.12-M 3.75 1.65 N3-23-9164X

1350 1.375-31/32

4.25 0.44-20 4 3.12-M 5.66 1.89 N3-23-9168KX

1350 1.375-31/32

4.25 0.44-20 4 3.12-M 6.60 1.88 N3-23-9163X

3-3

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS

SLEEVE

E D

DL Series

Spline / Number

Teeth

End Of Spline To

Weld Butt Dia. Part NumberSPL 170 Series

SPL170 3.465-32/34

8.00 4.351 N170-55-21-2X

SPL 170/250 SeriesSPL170 / SPL250

3.858-38 6.87 4.748 N250-55-31X

3-4

SLIP YOKE

NEW PARTS

HEX BORE - INSIDE LOCK-UP

D G E F

DL Series

Bore Type

Bore Dia.

Spline / Number

TeethKeyway Width

Keyway Loca-tion

CL To End Of

Hub/Spline

Lube Fitting Loca-tion

Lube Fitting

Distance To End Of Hub

Part Number

1000 Series A-2.312 B-0.938 C-1.5001000 Hexagon 0.875 — — — 5.50 GAP 1.75 10-3162

1000 Hexagon 1.125 — — — 5.50 GAP 1.75 10-0332

3-5

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS

RECTANGULAR BORE - INSIDE LOCK-UP

D G E F

DL Series

Bore Type

Bore Dia.

Spline / Number

TeethKeyway Width

Keyway Loca-tion

CL To End Of

Hub/Spline


Lube Fitting


Part Number

1000 Series A-2.312 B-0.938 C-1.5001000 Rectan-

gular0.750x0.875

— — — 5.50 GAP 1.75 10-1769

3-6

SLIP YOKE

NEW PARTS

ROUND BORE - INSIDE LOCK-UP

D G E F

DL Series

Bore Type

Bore Dia.

Spline / Number

TeethKeyway Width

Keyway Loca-tion

CL To End Of

Hub/Spline


Lube Fitting


Part Number

1000 Series A-2.312 B-0.938 C-1.5001000 Round 0.750 — 0.19 GAP 5.50 GAP 1.75 10-0313

1000 Round 0.813 — 0.25 GAP 5.50 GAP 1.75 10-0323

1000 Round 0.875 — 0.25 GAP 5.50 GAP 1.75 10-0333

1000 Round 1.000 — 0.25 GAP 5.50 GAP 1.75 10-0383

1000 Round 1.125 — 0.25 GAP 5.50 GAP 1.75 10-1767

1000 Round 1.125 — 0.31 GAP 5.50 GAP 1.75 10-3183

1000 Round 1.250 — 0.31 GAP 5.50 GAP 1.75 10-3163

3-7

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS

SQUARE BORE - INSIDE LOCK-UP

SPLINED - INSIDE LOCK-UP

D G E F

DL Series

Bore Type

Bore Dia.

Spline / Number

TeethKeyway Width

Keyway Loca-tion

CL To End Of

Hub/Spline


Lube Fitting


Part Number

1000 Series A-2.312 B-0.938 C-1.5001000 Splined — 1.125-10 — — 5.50 GAP 1.75 10-0381

1000 Splined — 1.125-10 — — 5.50 GAP 3.50 11-1075

1000 Splined — 1.250-16 — — 5.03 GAP 1.59 10-0318

1000 Splined — 1.250-16 — — 6.28 EAR 2.38 10-0319

1000 Splined — 1.250-6 — — 5.50 GAP 2.00 10-1765

D G E F

DL Series

Bore Type

Bore Dia.

Spline / Number

TeethKeyway Width

Keyway Loca-tion

CL To End Of

Hub/Spline


Lube Fitting


Part Number

1000 Series A-2.312 B-0.938 C-1.5001000 Square 0.750 — — — 5.50 GAP 1.75 10-0312

1000 Square 0.875 — — — 5.50 GAP 1.75 10-0322

1000 Square 1.000 — — — 5.50 GAP 1.75 10-3122

3-8

SLIP YOKE

NEW PARTS

SPLINED - INSIDE LOCK-UP

D E

DL Series

Spline / Number

Teeth

CL To End Of

Spline

CL To Face

WasherJoint Angle

Lube Fitting Part

Number Dust Cap Part Number3R Series A-3.563 B-1.125 C-2.563

3R 1.375-16 7.38 1.36 22 0641-B 280194 N3R-3-9170KX3R 1.375-31/32 7.38 1.36 22 0641-B ND3A N3R-3-9165KX

7260 Series A-3.000 B-1.078 C-2.1257260 1.375-16 6.88 1.20 18 0641-B 280194 N2-3-7260KX

7290 Series A-3.563 B-1.126 C-2.6257290 1.375-16 6.62 1.00 15 0641-B 280194 N729-3-1631KX

3-9

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS

SPLINED - OUTSIDE LOCK-UP

D E

DL Series

Spline / Number

Teeth

CL To End Of

Spline

CL To Face

WasherJoint Angle

Lube Fitting Part

Number Dust Cap Part Number1210 Series A-2.688 B-1.063

1210 1.250-14/16 6.40 1.27 20 0641-B 280196 N2-3-8861KX1210 1.250-14/16 8.02 1.27 20 0641-B 280196 N2-3-8961KX

1310 Series A-3.469 B-1.0631310 1.181-22 6.56 1.43 30 N2-3-12931310 1.250-16 6.56 1.43 30 0641-B ND2K N2-3-4441KX1310 1.375-16 5.38 1.05 15 0641-B 280194 N2-3-128KX1310 1.375-16 6.00 1.05 20 0641-B 280194 N2-3-7981KX1310 1.375-16 6.00 1.05 20 0641-B 280195 N2-3-4951KX1310 1.375-16 6.88 1.53 30 0641-B 280194 N2-3-8001KX1310 1.375-16 6.88 1.53 30 0641-B 280195 N2-3-5221KX1310 1.375-16 7.88 1.53 30 0641-B 280194 N2-3-8021KX1310 1.375-16 7.88 1.53 30 0641-B 280195 N2-3-5821KX1310 1.375-31/32 6.62 1.48 15 0641-B ND3A N2-3-7171KX1310 1.375-31/32 7.38 1.36 22 0641-B ND3A N2-3-9165KX1310 1.500-16 6.88 1.53 30 0641-B ND3A N2-3-6061KX

1330 Series A-3.875 B-1.0631330 1.375-15/16 6.62 1.09 15 0641-B 280194 N2-3-7681KX1330 1.375-16 6.00 1.05 15 0641-B 280194 N2-3-7961KX1330 1.375-16 6.00 1.05 15 0641-B 280195 N2-3-4681KX1330 1.375-16 7.50 1.09 19 0641-B 280194 N2-3-8041KX

3-10

SLIP YOKE

NEW PARTS

SPLINED - OUTSIDE LOCK-UP (Cont’d)

D E

DL Series

Spline / Number

Teeth

CL To End Of

Spline

CL To Face

WasherJoint Angle

Lube Fitting Part


1350 1.375-15/16 6.81 1.22 20 0641-B 280194-1 N3-3-2701KX1350 1.375-16 5.19 1.28 15 0641-B 280195 N3-3-758KX1350 1.375-16 5.81 1.24 15 0641-B 280195 N3-3-1501KX1350 1.375-16 7.31 1.24 20 0641-B 280195 N3-3-1502KX1350 1.375-31/32 6.62 1.23 20 0641-B ND3A N3-3-2471KX1350 1.500-16 5.81 1.24 20 0641-B ND3A N3-3-598KX1350 1.500-16 6.72 1.22 20 0641-B ND3A N3-3-1561KX1350 1.500-16 7.31 1.24 20 0641-B ND3A N3-3-488KX

1410 Series A-4.438 B-1.1881410 1.375-16 5.25 1.18 20 0641-B 280195 N3-3-788KX1410 1.375-16 5.81 1.18 20 0641-B 280195 N3-3-1481KX1410 1.500-16 5.25 1.18 20 0641-B ND3K N3-3-2041KX1410 1.500-16 6.50 1.18 20 0641-B ND3A N3-3-118KX1410 1.500-16 7.81 1.31 28 0641-B ND3A N3-3-508KX

1480 Series A-4.438 B-1.3751480 1.562-16 6.81 1.36 21 0641-B ND3H N3-3-1601KX1480 1.562-16 9.50 2.00 35 0641-B ND3H N3-3-1641KX

1550 Series A-5.250 B-1.3751550 1.750-16 6.88 1.88 22 0641-B ND4J N4-3-1241KX1550 1.750-16 8.12 1.38 22 0641-B ND4J N4-3-1411KX

3-11

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS

TRANSMISSION INSIDE LOCK-UP

D F EDL

SeriesSpline / Number

Teeth

CL To End Of Spline

Seal Dia.

CL To Face

Washer

Joint Angle

Spline Type

Part Number

3R Series A-3.563 B-1.1253R 1.172-26/27 5.47 1.50 — — Full Spline N3R-3-12361X3R 1.172-26/27 5.47 1.50 — — Full Spline NT3R-3-6081HP3R 1.172-26/27 5.47 1.50 0.88 — Full Spline N3R-3-6081X3R 1.172-26/27 6.75 1.50 — — Counter

BoreN3R-3-12051X

3R 1.172-26/27 6.75 1.50 — — Full Spline N3R-3-1658X3R 1.391-31/32 5.34 1.88 Full Spline NT3R-3-9762HP3R 1.391-31/32 5.34 1.88 1.00 15 Full Spline N3R-3-9762X3R 1.391-31/32 7.50 1.88 — — Counter

BoreNT3R-3-9131HP

3R 1.391-31/32 7.50 1.88 — — Full Spline NT3R-3-9161HP3R 1.391-31/32 7.50 1.88 1.00 15 Counter

BoreN3R-3-9131X

3R 1.391-31/32 7.50 1.88 1.00 15 Full Spline N3R-3-9161X3R 1.391-31/32 8.06 1.88 1.36 22 Full Spline N3R-3-9101X

7290 Series A-3.563 B-1.1267290 1.312-29/30 7.56 1.68 1.00 15 Counter

BoreN729-3-1932X

3-12

SLIP YOKE

NEW PARTS

TRANSMISSION OUTSIDE LOCK-UP

D F EDL


Teeth

CL To End Of Spline

Seal Dia.

CL To Face

Washer

Joint Angle

Spline Type

Part Number

1310 Series A-3.469 B-1.0631310 1.113-24/25 6.50 1.37 — — Full Spline NT2-3-8431HP1310 1.172-26/27 4.88 1.50 — — Full Spline NT2-3-4911HP1310 1.172-26/27 5.47 1.50 — — Full Spline NT2-3-6081HP1310 1.172-26/27 5.47 1.50 0.91 — Full Spline N2-3-6081X1310 1.172-26/27 8.00 1.50 — — Full Spline NT2-3-

6081HP8XL1310 1.219-27/28 6.00 1.49 — — Full Spline NT2-3-4871HP1310 1.219-27/28 6.03 1.50 1.05 20 Full Spline N2-3-4871X1310 1.219-27/28 6.50 1.49 Full Spline NT2-3-8251HP1310 1.219-27/28 6.53 1.50 1.00 15 Full Spline N2-3-8251X1310 1.219-27/28 7.03 1.60 /

1.501.00 15 Full Spline N2-3-12671X

1310 1.312-29/30 8.06 1.68 1.36 22 Counter Bore

N2-3-3575X

1310 1.390-30/31 7.00 1.68 1.53 30 Full Spline N2-3-15631X1310 1.391-31/32 4.88 1.88 — — Full Spline NT2-3-13131HP1310 1.391-31/32 5.50 1.88 — — Full Spline NT2-3-10431HP1310 1.391-31/32 5.50 1.88 1.00 15 Counter

BoreN2-3-10431X

1310 1.391-31/32 7.50 1.88 1.00 15 Counter Bore

N2-3-9131X

1310 1.391-31/32 7.50 1.88 1.00 15 Full Spline N2-3-9161X1310 1.391-31/32 8.06 1.88 1.36 22 Full Spline N2-3-9101X

3-13

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS

TRANSMISSION OUTSIDE LOCK-UP (Cont’d)

D F EDL


Teeth

CL To End Of Spline

Seal Dia.

CL To Face

Washer

Joint Angle

Spline Type

Part Number

1330 Series A-3.8759 B-1.0631330 1.172-26/27 5.47 1.50 — — Full Spline NT2-3-12081HP1330 1.172-26/27 6.76 1.50 — — Counter

BoreNT2-3-12051HP

1330 1.219-27/28 5.91 1.49 — — Full Spline NT2-3-5981HP1330 1.219-27/28 5.97 1.50 1.05 15 Full Spline N2-3-5981X1330 1.219-27/28 6.63 — — Full Spline NT2-3-14061HP1330 1.219-27/28 6.66 1.60 1.05 15 Full Spline N2-3-14061X1330 1.378-31/32 6.76 1.88 — — Full Spline NT2-3-10831HP1330 1.390-30/31 6.00 — — Full Spline NT2-3-6041HP1330 1.390-30/31 6.03 1.68 1.05 15 Full Spline N2-3-6041X1330 1.390-30/31 7.00 1.88 — — Full Spline NT2-3-10201HP1330 1.390-30/31 7.03 1.88 1.09 19 Full Spline N2-3-10201X

3-14

SLIP YOKE

NEW PARTS


D F EDL


Teeth

CL To End Of Spline

Seal Dia.

CL To Face

Washer

Joint Angle

Spline Type

Part Number

1350 Series A-3.875 B-1.1881350 1.172-26/27 5.47 1.50 — — Full Spline NT3-3-6081HP1350 1.172-26/27 5.94 1.50 1.19 20 Full Spline N3-3-4271X1350 1.172-26/27 6.94 1.50 — — Counter

BoreNT3-3-4281HP

1350 1.172-26/27 6.94 1.50 1.19 — Counter Bore

N3-3-4281X

1350 1.219-27/28 6.50 1.49 — — Full Spline NT3-3-8251HP1350 1.219-27/28 6.63 1.59 — — Full Spline NT3-3-14061HP1350 1.219-27/28 6.75 1.60 1.17 20 Full Spline N3-3-14061X1350 1.375-31/32 5.50 1.88 1.24 15 Counter

BoreN3-3-2431X

1350 1.378-31/32 5.50 1.88 — — Counter Bore

NT3-3-2431CBHP

1350 1.378-31/32 5.50 1.88 — — Full Spline NT3-3-2431HP1350 1.378-31/32 6.94 1.88 — — Full Spline NT3-3-5571HP1350 1.378-31/32 6.94 1.89 1.31 — Full Spline N3-3-4261X1350 1.378-31/32 7.88 1.89 1.31 — Full Spline N3-3-9467X1350 1.378-31/32 7.94 1.88 — — Counter

BoreNT3-3-5551HP

1350 1.390-30/31 6.44 1.68 — — Full Spline NT3-3-2491HP1350 1.390-30/31 6.50 1.68 1.22 20 Full Spline N3-3-2491X1350 1.390-30/31 7.31 1.88 — — Full Spline NT3-3-5431HP1350 1.390-30/31 7.34 1.88 0.91 20 Full Spline N3-3-5431X

3-15

SLI

P Y

OK

E

SLIP YOKE

NEW PARTS


D F EDL


Teeth

CL To End Of Spline

Seal Dia.

CL To Face

Washer

Joint Angle

Spline Type

Part Number

1480 Series A-4.438 B-1.3751480 1.390-30/31 6.91 1.88 1.36 21 Full Spline N3-3-6021X

3-16

SLIP YOKE

NEW PARTS


D E

DL Series

Spline / Number

Teeth

CL To End Of

Spline

CL To Face

WasherJoint Angle

Lube Fitting Part


1610 2.000-16 10.81 3.19 35 0610-B N5-86-68 N5-3-2261KX1610 2.000-16 8.88 2.69 35 0610-B N5-86-68 N5-3-368KX1610 2.000-16 9.31 3.19 30 0610-B N5-86-68 N5-3-288KX

1710 Series A-6.094 B-1.9381710 2.500-16 11.69 2.44 30 0610-B N6.3-86-18 N6-3-2651KX1710 2.500-16 12.72 3.11 45 0610-B N6.3-86-18 N6-3-3441KX1710 2.500-16 9.59 1.72 22 0610-B N6.3-86-18 N6-3-2671KX

1760 Series A-7.000 B-1.9381760 2.500-16 11.16 2.47 30 0610-B N6.3-86-18 N6.3-3-21KX1760 2.500-16 9.25 2.92 30 0610-B N6.3-86-18 N6.3-3-41KX

1810 Series A-7.547 B-1.9381810 3.000-16 10.25 2.38 30 0610-B N6.5-86-38 N6.5-3-1351KX1810 3.000-16 11.88 2.38 30 0610-B N6.5-86-38 N6.5-3-1371KX

20R Series A-7.250 B-2.06020R 2.500-16 11.45 2.92 32 — — N20RLS40-

2A1S20R 2.500-16 11.45 2.92 32 — — N20RPL-SLIP20R 2.500-16 12.05 3.52 44 — — N20RLS40-

3A1S25R Series A-8.580 B-2.060

25R 3.000-16 11.28 2.75 22 — — N25RLS48-1A1S

25R 3.000-16 11.28 2.75 22 — — N25RPL-SLIP

4-1

EN

D Y

OK

E

● PTO - Non Splined Bore ● PTO - Splined Bore● Splined CV● Splined U-Bolt● Splined Bearing Strap● Splined Bearing Plate● Splined Wing - RPL● Steering Clamp

End Yoke4

4-2

END YOKE

NEW PARTS

PTO HEX BORE - INSIDE LOCK-UP

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1000 Series A-2.312 B-0.938 C-1.500

Hexa-gon

1000 0.875 — — 0.375-16

GAP 0.62 2.50 2.25 — 10-4282

Hexa-gon

1000 1.125 — — 0.375-16

GAP 0.62 2.50 2.25 — 10-0432

4-3

EN

D Y

OK

E

END YOKE

NEW PARTS

PTO SQUARE BORE - INSIDE LOCK-UP

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1000 Series A-2.312 B-0.938 C-1.500

Square 1000 0.750 — — 0.375-16

GAP 0.62 2.50 1.62 — 10-0422

Square 1000 0.875 — — 0.375-16

GAP 0.62 2.50 1.62 — 10-0412

Square 1000 1.000 — — 0.375-16

GAP 0.62 2.50 2.25 — 10-0452

4-4

END YOKE

NEW PARTS

PTO RECTANGULAR BORE - INSIDE LOCK-UP

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1000 Series A-2.312 B-0.938 C-1.500

Rectan-gular

1000 1.000 x 1.125

— — — — — 2.50 2.25 — 10-1559

4-5

EN

D Y

OK

E

END YOKE

NEW PARTS

PTO ROUND BORE - INSIDE LOCK-UP

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1000 Series A-2.312 B-0.938 C-1.500

Round 1000 0.625 0.19 GAP 0.375-16

EAR 0.62 2.50 1.62 — 10-4373

Round 1000 0.750 0.19 GAP 0.375-16

EAR 0.44 1.69 1.62 — 10-4693

Round 1000 0.750 0.19 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0413

Round 1000 0.750 0.19 GAP 0.375-16 (2)

EAR 0.62 2.50 1.62 — 10-4133

Round 1000 0.750 0.25 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0423

Round 1000 0.812 0.25 GAP 0.375-16

EAR 0.62 2.50 1.62 — 10-4173

Round 1000 0.812 0.25 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0443

Round 1000 0.875 0.19 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0453

Round 1000 0.875 0.25 GAP 0.375-16

EAR 0.62 2.50 1.62 — 10-4453

Round 1000 0.875 0.25 GAP 0.375-16

GAP 0.44 1.69 1.62 — 10-4703

Round 1000 0.875 0.25 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0463

4-6

END YOKE

NEW PARTS

PTO ROUND BORE - INSIDE LOCK-UP (Cont’d)

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1000 Series A-2.312 B-0.938 C-1.500

Round 1000 0.938 0.25 GAP 0.375-16

EAR 0.62 2.50 1.62 — 10-0473

Round 1000 1.000 — — 0.375 DT (2)

EAR 0.62 2.50 1.62 — 10-4443

Round 1000 1.000 0.19 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0483

Round 1000 1.000 0.25 GAP 0.375-16

EAR 0.44 1.69 1.62 — 10-1705

Round 1000 1.000 0.25 GAP 0.375-16

EAR 0.62 2.50 1.62 — 10-4573

Round 1000 1.000 0.25 GAP 0.375-16

GAP 0.62 2.50 1.62 — 10-0493

Round 1000 1.063 0.25 GAP 0.375-16

EAR 0.62 2.50 2.25 — 10-4163

Round 1000 1.125 0.25 GAP 0.375-16

GAP 0.62 2.50 2.25 — 10-4103

Round 1000 1.125 0.25 GAP 0.375-16

EAR 0.62 2.50 2.25 — 10-4143

Round 1000 1.125 0.31 GAP 0.375-16

GAP 0.62 2.50 2.25 — 10-4113

Round 1000 1.125 0.31 GAP 0.375-16

GAP 0.62 2.50 2.25 — 10-4473

Round 1000 1.188 0.25 / 0.31

GAP 0.375-16

EAR 0.62 2.50 2.25 — 10-1574

Round 1000 1.188 0.31 GAP 0.375-16

EAR 0.62 2.50 2.25 — 10-4153

4-7

EN

D Y

OK

E

END YOKE

NEW PARTS

PTO ROUND BORE - INSIDE LOCK-UP (Cont’d)

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1000 Series A-2.312 B-0.938 C-1.500

Round 1000 1.250 — — 0.375 DT (2)

EAR 0.62 2.50 2.25 — 10-4363

Round 1000 1.250 0.25 GAP 0.375-16

EAR 0.62 2.50 2.25 — 10-4183

Round 1000 1.250 0.31 GAP 0.375-16

EAR 0.62 2.50 2.25 — 10-4193

Round 1000 1.250 0.31 GAP 0.375-16

GAP 0.62 2.50 2.25 — 10-4123

Round 1000 1.375 0.31 GAP 0.375-16

EAR 0.62 2.50 2.00 — 10-4293

Round 1000 1.500 — — 0.281 DT (2)

EAR 0.50 2.50 2.00 — 10-1532

4-8

END YOKE

NEW PARTS

PTO ROUND BORE - OUTSIDE LOCK-UP

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1310 Series A-3.469 B-1.063

Round 1310 0.750 — — — — — 2.56 2.00 1.62 N2-4-177

Round 1310 0.875 0.25 EAR 0.375-16

EAR 0.62 2.56 2.00 1.62 N2-4-583

Round 1310 1.000 0.25 EAR 0.375-16

EAR 0.62 2.56 2.00 1.62 N2-4-473

Round 1310 1.125 0.25 EAR 0.375-16

EAR 0.62 2.56 2.00 1.62 N2-4-503

Round 1310 1.250 — — — — — 2.56 2.00 1.62 N2-4-533-1

Round 1310 1.250 0.25 EAR 0.375-16

EAR 0.62 2.56 2.00 1.62 N2-4-573

Round 1310 1.250 0.31 EAR 0.375-16

EAR 0.62 2.56 2.00 1.62 N2-4-533

Round 1310 1.375 — — — — — 2.56 2.00 1.62 N2-4-803-1

Round 1310 1.375 0.31 EAR 0.375-16

GAP 0.62 2.56 2.00 1.62 N2-4-1103

Round 1310 1.375 0.38 EAR 0.375-16

EAR 0.62 2.56 2.00 1.62 N2-4-803

Round 1310 1.500 0.38 EAR 0.375-16

EAR — 2.56 2.12 1.62 N2-4-1233

4-9

EN

D Y

OK

E

END YOKE

NEW PARTS

PTO ROUND BORE - U-BOLT

D F G H E J I

Bore Type

DL Series

Bore Dia.

Key-way

Width

Key-way

Loca-tion

Set Screw Hole Size

Set Screw Loca-tion

Set Screw Dis-

tance To End Of Hub

CL To

End Of

HubHub Dia.

Length ThruBore

PartNumber

1310HR Series A-3.219 B-1.063

Round 1310 HR

1.125 0.25 EAR 0.375-16

EAR 0.62 2.94 2.12 1.50 N2-4-782

Round 1310 HR

1.250 0.25 / 0.31

EAR 0.375-16

EAR 0.62 2.94 2.12 1.50 N2-4-783-1

Round 1310 HR

1.250 0.31 EAR 0.375-16

EAR 0.62 2.94 2.12 1.50 N2-4-783

Round 1350 HR

1.250 0.31 EAR 0.375-16

EAR 0.62 3.00 2.25 1.50 N3-4-283-1

4-10

END YOKE

NEW PARTS

PTO SPLINED - INSIDE LOCK-UP

F D E

Bore Type

DL Series

Spline / Number

Teeth

Set Screw Hole Size

Set Screw Loca-tion

Set Screw


CL To

End Of

HubHub Dia.

Length Through

BorePart

Number

1000 Series A-2.312 B-0.938 C-1.500

Splined 1000 0.875-13 0.375-16 EAR 0.50 2.50 1.62 2.03 10-4481

Splined 1000 1.375-6 0.330 DT (2)

EAR 0.38 2.50 2.00 2.03 10-0431

4-11

EN

D Y

OK

E

END YOKE

NEW PARTS

PTO SPLINED - OUTSIDE LOCK-UP

F D E

Bore Type

DL Series

Spline / Number

Teeth

Set Screw Hole Size

Set Screw Loca-tion

Set Screw


CL To

End Of

HubHub Dia.

Length Through

BorePart

Number

1310 Series A-3.469 B-1.063

Splined 1310 0.875-13 0.375-16 EAR 0.62 2.56 2.00 1.52 N2-4-3331

Splined 1310 1.000-15 — — — 2.31 2.00 1.26 N2-4-4921

4-12

END YOKE

NEW PARTS

SPLINED - CV CONSTRUCTION

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of

HubJoint Angle Part Number

1310HR Series A-3.219 B-1.0631310HR CV 1.125-10 1.55 — 1.50 3.00 13 N2-4-4061X1310HR CV 1.146-26 1.55 — 1.50 3.00 13 N2-4-43411310HR CV 1.401-32 1.88 — 2.00 3.88 13 N2-4-53411310HR CV 1.401-32 1.94 — 2.00 3.84 13 N2-4-JK03

4-13

EN

D Y

OK

E

END YOKE

NEW PARTS

SPLINED - U-BOLT CONSTRUCTION

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


1310HR Series A-3.219 B-1.0631310HR U-Bolt 1.125-10 1.55 — 1.50 3.00 25 N2-4-27911310HR U-Bolt 1.146-26 1.55 — 1.50 3.00 22.5 N2-4-8091X1310HR U-Bolt 1.235-28 1.81 — 2.42 4.03 25 N2-4-FD01X1310HR U-Bolt 1.250-24 1.85 — 1.50 3.00 22 N2-4-JK061310HR U-Bolt 1.250-24 1.88 — 1.50 3.00 22 N2-4-JK021310HR U-Bolt 1.276-29 1.88 — 1.50 2.94 18 N2-4-3801X1310HR U-Bolt 1.312-30 1.94 — 1.15 3.16 20 N2-4-GM03X1310HR U-Bolt 1.328-30 1.74 — 1.19 2.59 25 N2-4-GM01X1310HR U-Bolt 1.375-10 1.75 — 1.75 3.22 20 N2-4-26711310HR U-Bolt 1.401-32 1.94 — 2.00 3.44 22 N2-4-JK011310HR U-Bolt 1.401-32 2.12 — 2.00 3.44 22 N2-4-4191

1330HR Series A-3.622 B-1.0631330HR U-Bolt 1.235-28 1.81 — 2.42 4.03 25 N2-4-FD02X1330HR U-Bolt 1.328-30 1.74 — 1.19 2.70 25 N2-4-GM02X

1350HR Series A-3.622 B-1.1881350HR U-Bolt 1.250-24 1.85 — 1.50 3.10 22 N3-4-JK081350HR U-Bolt 1.250-24 1.88 — 1.50 3.10 — N3-4-JK04

4-14

END YOKE

NEW PARTS

SPLINED - BEARING STRAP CONSTRUCTION

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


1310HR Series A-3.219 B-1.0631310HR Strap 1.209-27 1.52 — 1.48 3.06 — N2-4-2007-1X

1350HR Series A-3.622 B-1.1881350HR Strap 1.312-30 1.94 2.11 1.15 3.19 — N3-4-0880-1X1350HR Strap 1.375-10 1.72 — 1.78 3.28 20.5 N3-4-178-1X1350HR Strap 1.375-10 1.72 — 1.78 3.28 20.5 N3-4-2171-1

1410HR Series A-4.187 B-1.1881410HR Strap 1.500-10 1.81 — 2.00 3.72 24 N3-4-6561-11410HR Strap 1.500-10 1.81 — 2.00 3.72 24 N3-4-6631X

4-15

EN

D Y

OK

E

END YOKE

NEW PARTS

SPLINED - BEARING STRAP CONSTRUCTION

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


3R Series Series A-3.563 B-1.1253R Strap 1.209-27 1.52 1.69 1.48 3.34 — N3R-4-5850-1X3R Strap 1.312-30 1.94 — 1.15 3.12 — N3R-4-8336-1X3R Strap 1.312-30 1.94 2.11 1.15 3.12 — N3R-4-0876-1X

4-16

END YOKE

NEW PARTS

SPLINED - BEARING STRAP CONSTRUCTION (Cont’d)

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


1550HR Series A-4.965 B-1.3751550HR Strap 1.500-10 2.31 — 2.00 3.78 22 N4-4-2051-1

1610HR Series A-5.312 B-1.8751610HR Strap 1.750-10 2.19 — 2.25 4.13 — N5-4-1721-1X1610HR Strap 1.790-34 2.19 — 2.25 4.12 22 N5-4-7171-11610HR Strap 2.000-39 2.31 — 2.31 4.88 — N5-4-6441-1X

1710HR Series A-6.1902 B-1.9381710HR Strap 1.960-10 2.82 — 3.00 5.00 — N6-4-1981-11710HR Strap 2.000-38 2.81 — 3.00 5.00 25 N6-4-7141-11710HR Strap 2.000-39 3.00 — 2.31 5.16 28 N6-4-7631-1X1710HR Strap 2.000-39 3.00 — 2.31 5.16 28 N6-4-7641-1X1710HR Strap 2.000-39 3.00 — 2.31 6.25 — N6-4-6371-11710HR Strap 2.000-39 3.00 — 2.31 6.25 — N6-4-6391-1X1710HR Strap 2.020-39 2.62 — 2.50 6.12 39.5 N6-4-9001-1X1710HR Strap 2.020-39 2.75 — 2.00 5.00 33.5 N6-4-8331-1X1710HR Strap 2.020-39 3.00 — 2.28 6.12 39.5 N6-4-8991-1X1710HR Strap 2.110-32 3.00 — 2.25 4.56 24 N6-4-8681-1X1710HR Strap 2.280-44 2.94 — 2.50 5.19 27 N6-4-6041-1X1710HR Strap 2.340-16 3.31 — 2.75 4.94 20 N6-4-4601-11710HR Strap 2.380-46 3.25 — 2.32 5.38 — N6-4-7181-1X1710HR Strap 2.390-46 2.88 — 2.75 4.94 20.5 N6-4-7481-11710HR Strap 2.500-10 3.75 — 3.00 5.63 30 N6-4-6921-1X1710HR Strap 2.750-10 3.75 — 3.00 5.75 20 N6-4-6931-1X

4-17

EN

D Y

OK

E

END YOKE

NEW PARTS


D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


1760HR Series A-7.094 B-1.9381760HR Strap 2.000-39 3.00 — 2.31 5.19 30 N6.3-4-541-1X1760HR Strap 2.110-32 3.00 — 2.25 5.00 30.5 N6.3-4-1521-1X1760HR Strap 2.270-44 3.00 — 2.50 5.25 30 N6.3-4-5221-1X1760HR Strap 2.280-44 2.94 — 2.50 5.25 26 N6.3-4-331-1X1760HR Strap 2.340-16 2.88 — 2.75 5.50 30 N6.3-4-161-11760HR Strap 2.380-46 3.25 — 2.32 5.06 — N6.3-4-1041-1X1760HR Strap 2.380-46 3.31 — 2.75 5.50 30 N6.3-4-821-11760HR Strap 2.390-46 3.50 — 2.41 5.38 30 N6.3-4-1391-1X1760HR Strap 2.500-10 3.75 — 3.00 6.03 32 N6.3-4-781-1X1760HR Strap 2.750-10 3.75 — 3.00 5.97 30 N6.3-4-791-1X1760HR Strap 2.790-54 — — 2.75 5.62 — N6.3-4-1681-1

1810HR Series A-7.643 B-1.9381810HR Strap 2.000-39 3.00 — 2.31 5.19 30 N6.5-4-3381-1X1810HR Strap 2.270-44 2.94 — 2.50 5.25 30 N6.5-4-3281-1X1810HR Strap 2.270-44 3.00 — 2.50 5.25 30 N6.5-4-4571-1X1810HR Strap 2.340-16 3.31 — 2.75 5.50 30 N6.5-4-1891-11810HR Strap 2.380-46 3.25 — 2.32 5.16 — N6.5-4-3721-11810HR Strap 2.380-46 3.25 — 2.32 5.16 — N6.5-4-3731-1X1810HR Strap 2.380-46 3.31 — 2.75 5.50 30 N6.5-4-3591-11810HR Strap 2.380-46 3.38 — 3.19 6.00 30 N6.5-4-3921-1X1810HR Strap 2.500-10 3.75 — 3.00 5.88 30 N6.5-4-3551-1X1810HR Strap 2.750-10 3.75 — 3.00 6.06 30 N6.5-4-3561-1X1810HR Strap 2.790-54 — — 2.75 5.62 30 N6.5-4-4631-1

4-18

END YOKE

NEW PARTS


D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


SPL170HR Series A-6.457 B-2.165SPL-

170HRStrap 2.02-39 2.62 — 2.50 6.50 45 N170-4-241-1X

SPL-170HR

Strap 2.02-39 3.00 — 2.28 5.16 25 N170-4-261-1X

SPL-170HR

Strap 2.02-39 3.00 — 2.28 6.24 45 N170-4-281-1X

SPL-170HR

Strap 2.02-39 3.00 — 2.31 6.39 45 N170-4-671-1X

SPL-170HR

Strap 2.27-44 3.00 — 2.50 5.27 25 N170-4-201-1X

SPL-170HR

Strap 2.39-46 3.25 — 2.33 5.10 25 N170-4-721-1X

SPL-170HR

Strap 2.39-46 — — 2.75 5.59 25 N170-4-1271-1

SPL-170HR

Strap 2.75-10 3.75 — 3.00 5.86 25 N170-4-521-1X

SPL-170HR

Strap 2.79-54 — — 2.75 5.60 25 N170-4-561-1

4-19

EN

D Y

OK

E

END YOKE

NEW PARTS


D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


SPL250HR Series A-6.413 B-2.361SPL-

250HRStrap 2.27-44 3.00 — 2.50 5.49 25 N250-4-81-1X

SPL-250HR

Strap 2.39-46 3.25 — 2.31 5.31 25 N250-4-351-1X

SPL-250HR

Strap 2.39-46 — — 2.75 5.75 25 N250-4-21-1

SPL-250HR

Strap 2.75-10 3.75 — 3.00 6.30 25 N250-4-241-1X

SPL-250HR

Strap 2.79-54 — — 2.75 5.70 25 N250-4-271-1

4-20

END YOKE

NEW PARTS

SPLINED - BEARING PLATE CONSTRUCTION

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


1610 Series A-5.312 B-1.8751610 Plate 1.750-10 2.19 — 2.25 4.12 24 N5-4-17211610 Plate 2.000-39 3.00 — 2.31 6.22 45 N5-4-6291X

1710 Series A-6.094 B-1.9381710 Plate 1.750-34 2.50 — 2.25 4.88 30 N6-4-63311710 Plate 1.780-34 2.62 — 2.44 5.44 33.5 N6-4-64811710 Plate 1.780-34 2.62 — 2.44 6.31 45 N6-4-64511710 Plate 1.790-34 2.62 — 2.44 5.44 34 N6-4-8511X1710 Plate 1.790-34 2.62 — 2.44 6.31 45 N6-4-8521X1710 Plate 1.960-10 2.81 — 3.00 5.00 21/32 N6-4-19811710 Plate 2.024-39 2.62 — 2.25 5.25 — N6-4-8531X1710 Plate 2.024-39 2.62 — 2.25 6.12 45 N6-4-6021X1710 Plate 2.024-39 2.75 — 2.44 5.25 30 N6-4-6951X1710 Plate 2.024-39 3.00 — 2.31 5.16 28 N6-4-64011710 Plate 2.024-39 3.00 — 2.31 5.16 28 N6-4-6411X1710 Plate 2.024-39 3.00 — 2.31 5.16 28 N6-4-6421X1710 Plate 2.024-39 3.00 — 2.31 6.25 45 N6-4-63711710 Plate 2.024-39 3.00 — 2.31 6.25 45 N6-4-6391X1710 Plate 2.143-41 2.94 — 2.50 6.12 42.5 N6-4-7561X1710 Plate 2.143-41 2.94 — 3.00 6.63 — N6-4-75411710 Plate 2.250-10 3.50 — 3.00 5.25 22 N6-4-2141

1710 Plate 2.274-44 2.94 — 2.50 5.19 27 N6-4-6041X1710 Plate 2.340-16 2.88 — 2.75 4.94 26 N6-4-46011710 Plate 2.340-16 2.88 — 2.75 4.94 26 N6-4-5071X

4-21

EN

D Y

OK

E

END YOKE

NEW PARTS

SPLINED - BEARING PLATE CONSTRUCTION

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


1710 Series A-6.094 B-1.938 (Cont’d)1710 Plate 2.380-46 3.25 — 2.32 5.38 31 N6-4-7181X1710 Plate 2.380-46 3.25 — 2.32 6.50 31 N6-4-7771X1710 Plate 2.500-10 2.94 /

3.75— 3.00 5.62 30 N6-4-6921

1710 Plate 2.750-10 3.75 — 3.00 5.75 22 N6-4-6931X

1760 Series A-7.000 B-1.9381760 Plate 2.000-39 3.00 — 2.31 5.19 29 N6.3-4-541X1760 Plate 2.280-44 3.00 — 2.50 5.25 — N6.3-4-5221X1760 Plate 2.340-16 2.86 — 2.75 5.50 30 N6.3-4-1611760 Plate 2.380-46 3.25 — 2.32 5.06 29 N6.3-4-1041X1760 Plate 2.750-10 3.75 — 3.00 5.97 30 N6.3-4-791X

1810 Series A-7.547 B-1.9381810 Plate 2.220-6 3.00 — 3.25 6.00 30 N6.5-4-2271X1810 Plate 2.280-44 2.94 — 2.50 5.25 30 N6.5-4-3281X1810 Plate 2.340-16 2.88 — 2.75 5.50 30 N6.5-4-18911810 Plate 2.340-16 2.88 — 2.75 5.50 30 N6.5-4-2531X1810 Plate 2.380-46 3.25 — 2.32 5.16 — N6.5-4-3731X1810 Plate 2.380-46 3.25 — 2.62 5.44 30 N6.5-4-2711X1810 Plate 2.380-46 3.31 — 2.75 5.50 — N6.5-4-35911810 Plate 2.750-10 3.38 — 2.94 6.00 30 N6.5-4-21711810 Plate 2.750-10 3.75 — 3.00 6.06 30 N6.5-4-3561X1810 Plate 2.790-54 — — 2.75 5.62 30 N6.5-4-4631

4-22

END YOKE

NEW PARTS

SPLINED - WING RPL

D E F

DLSeries

UJ Retention

Spline / Number

TeethHub Dia.

Sleeve Dia.

Length Through

Bore

CL To End Of


20R Series A-7.0620R Wing-RPL 2.000-39 3.00 — 2.31 4.85 — N20WYS32-1720R Wing-RPL 2.000-39 3.00 — 2.31 5.95 — N20WYS32-220R Wing-RPL 2.000-39 3.00 — 2.31 5.95 — N20WYS32-2A20R Wing-RPL 2.380-46 2.88 — 2.75 4.90 — N20WYSC38-1820R Wing-RPL 2.380-46 3.25 — 2.32 4.90 — N20WYS38-4A20R Wing-RPL 2.750-10 3.75 — 3.00 5.09 — N20WYS44-2A20R Wing-RPL 2.790-54 3.75 — 2.75 5.25 — N20WYS45

25R Series A-8.3825R Wing-RPL 2.380-46 2.88 — 2.75 4.90 — N25WYSC38-1125R Wing-RPL 2.380-46 3.25 — 2.32 4.73 — N25WYS38-13A25R Wing-RPL 2.380-46 3.25 — 2.32 4.73 — N25WYS38-

13A425R Wing-RPL 2.750-10 3.75 — 3.00 5.09 — N25WYS44-2A25R Wing-RPL 2.790-54 3.75 — 2.75 5.88 — N25WYS45

4-23

EN

D Y

OK

E

END YOKE

NEW PARTS

SPLINED - STEERING CLAMP

D E G F

DL SeriesSpline / Number

Teeth

Bolt Hole Dia.

CL Of Bearing Cap To CL Of

Bolt Hole

CL Of Spline

To CL Of Bolt Hole

CL To End Of

HubPart

Number1000STR 1.011-26/36 0.41 2.03 0.60 2.50 10-49611000STR 1.011-26/36 0.47 2.03 0.60 2.50 10-4731

5-1

CE

NT

ER

& T

UB

E Y

OK

E

Center & Tube Weld Yoke5

● C.V. Ball Stud Tube Yoke● C.V. Centering Yoke● Center Yoke (“H” Yoke)● Inside Lock-Up● Outside Lock-Up● Bearing Plate Construction● PlateLock Construction

5-2

CENTER & TUBE WELD YOKE

NEW PARTS

C.V. BALL STUD TUBE WELD YOKE - INSIDE LOCK-UP

D E F G H

DL Series

Tubing Dia. And

WallButt Dia.

CL To Point

Of Weld

CL To End Of

Ball Stud

Ball Stud

Length

Ball Stud Dia.

Joint Angle (Max)

Flinger/ Boot Part

Number Part Number

3R Series A-3.563 B-1.125 C-2.5633R 2.000X.120 1.77 1.62 1.98 — 0.91 8.5 — N3R-28-8693R 2.750X.065 2.63 1.62 1.98 — 0.91 8.5 — N3R-28-341

5-3

CE

NT

ER

& T

UB

E Y

OK

E


NEW PARTS

C.V. BALL STUD TUBE WELD YOKE - OUTSIDE LOCK-UP

D E F G H

DL Series

Tubing Dia. And

WallButt Dia.

CL To Point

Of Weld

CL To End Of

Ball Stud

Ball Stud

Length

Ball Stud Dia.

Joint Angle (Max)

Flinger/ Boot Part

Number Part Number

1310 Series A-3.469 B-1.0631310 1.250x.120 1.02 1.44 1.64 0.60 0.50 13 — N2-28-2997X1310 1.750x.095 1.57 1.44 1.64 0.60 0.50 13 — N2-28-2937X1310 2.000X.120 1.77 1.44 1.64 0.60 0.50 13 — N2-28-2947X1310 2.500x.083 2.34 1.44 1.64 0.60 0.50 13 — N2-28-2957X1310 2.750x.065 2.63 1.44 1.64 0.60 0.50 13 — N2-28-2987X1310 2.750x.083 2.59 1.44 1.64 0.60 0.50 13 — N2-28-3817X1310 3.000x.065 2.88 1.44 1.64 0.60 0.50 13 — N2-28-2967X1310 3.000x.083 2.84 1.44 1.64 0.60 0.50 13 — N2-28-2977X

1330 Series A-3.875 B-1.0631330 2.000x.120 1.77 1.38 1.66 0.60 0.50 13 — N2-28-2157X1330 2.500x.083 2.34 1.38 1.66 0.60 0.50 13 — N2-28-2137X1330 3.000x.065 2.88 1.50 1.66 0.60 0.50 13 — N2-28-2117X

5-4


NEW PARTS

C.V. BALL STUD TUBE WELD YOKE - EXTENDED LUBE

D E F G H

DL Series

Tubing Dia. And Wall

Butt Dia.

CL To Point

Of Weld

CL To

End Of

Ball Stud

Ball Stud

Length

Ball Stud Dia.

Joint Angle (Max)

Boot Part Number Part Number

1310 Series A-3.469 B-1.0631310 1.750X.095 1.57 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-2827X1310 2.000X.120 1.77 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-2867X1310 2.500X.065 2.38 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-3087X1310 2.500X.083 2.34 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-2887X1310 2.750X.065 2.63 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-2747X1310 3.000X.065 2.88 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-2907X1310 3.000X.083 2.84 1.44 1.64 0.60 0.50 13 N2-86-418 N2-28-2927X

1330 Series A-3.875 B-1.0631330 2.000X.120 1.77 1.38 1.66 0.60 0.50 9 N2-86-418 N2-28-3257X1330 2.500X.083 2.34 1.38 1.66 0.60 0.50 9 N2-86-418 N2-28-3067X1330 2.500X.095 2.32 1.38 1.66 0.60 0.50 9 N2-86-418 N2-28-3277X1330 3.000X.083 2.84 1.38 1.66 0.60 0.50 9 N2-86-418 N2-28-3447X

1350 Series A-3.875 B-1.1881350 2.000X.120 1.77 1.44 1.73 0.60 0.50 15 N2-86-418 N3-28-2947X1350 2.500X.095 2.32 1.44 1.73 0.60 0.50 15 N2-86-418 N3-28-3281X1350 2.750X.083 2.59 1.47 1.73 0.60 0.50 15 N2-86-418 N3-28-1747-1X1350 3.000X.083 2.84 1.47 1.73 0.60 0.50 15 N2-86-418 N3-28-1327-1X1350 3.500X.083 3.34 1.50 1.73 0.60 0.50 15 N2-86-418 N3-28-1527-1X

5-5

CE

NT

ER

& T

UB

E Y

OK

E


NEW PARTS

C.V. CENTERING YOKE

D E F

DL Series

Bolt Hole Spacing

Width

Bolt Hole Spacing Length

Hole/Thread

Size


1310HR Series A-3.219 B-1.0631310HR 2.34 1.50 0.31-24 0.50 7-00821310HR 2.34 1.50 0.31-24 0.50 7-0082NG

1330HR Series A-3.622 B-1.0631330HR 2.88 1.50 0.31-24 0.50 7-00791330HR 2.88 1.50 0.31-24 0.50 7-0079NG

1350HR Series A-3.622 B-1.1881350HR 2.75 1.62 0.31-24 0.50 N3-83-019X

5-6


NEW PARTS

C.V. H YOKE - INSIDE LOCK-UP

D

DL SeriesCenter To

Center

Maximum Joint Angle Part Number

3R Series A-3.563 B-1.125 C-2.5633R 3.25 17 N3R-26-057

5-7

CE

NT

ER

& T

UB

E Y

OK

E


NEW PARTS

C.V. H YOKE - OUTSIDE LOCK-UP

D

DL SeriesCenter To

Center

Maximum Joint Angle Part Number

1310 Series A-3.469 B-1.0631310 2.69 26 N2-26-367

1330 Series A-3.875 B-1.0631330 2.75 18 N2-26-527

1350 Series A-3.875 B-1.1881350 2.88 30 N3-26-757

5-8


NEW PARTS

TUBE WELD YOKE (Steel) - INSIDE LOCK-UP

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


1000 Series A-2.312 B-0.938 C-1.500STEEL 1000 1.750X.065 1.62 SO 2.00 60 10-2817STEEL 1000 2.000X.083 1.84 HO 2.16 10-1005

3R Series A-3.563 B-1.125 C-2.563STEEL 3R 2.000X.120 1.77 HO 1.84 N3R-28-1757STEEL 3R 2.250X.154 1.96 HO 1.75 N3R-28-551STEEL 3R 2.750X.065 2.62 HO 1.75 20 N3R-28-307STEEL 3R 2.750X.088 2.58 HO 1.80 N3R-28-309STEEL 3R 3.000X.065 2.88 HO 1.88 21.5 N3R-28-327STEEL 3R 3.000X.083 2.84 HO 1.88 21.5 N3R-28-437STEEL 3R 3.000X.095 2.82 HO 1.88 21.5 N3R-28-157STEEL 3R 3.250X.065 3.12 HO 1.88 21.5 N3R-28-325STEEL 3R 3.500X.065 3.38 HO 1.88 21.5 N3R-28-397STEEL 3R 3.500X.083 3.34 HO 1.88 21.5 N3R-28-427STEEL 3R 4.000X.065 3.88 HO 1.65 N3R-28-021

7290 Series A-3.563 B-1.126 C-2.625STEEL 7290 2.750X.065 2.62 HO 1.75 20 N729-28-307STEEL 7290 3.000X.083 2.84 HO 1.88 21.5 N729-28-437STEEL 7290 3.250X.065 3.12 HO 1.88 21.5 N729-28-325STEEL 7290 3.500X.065 3.38 HO 1.88 21.5 N729-28-397STEEL 7290 4.000X.065 3.88 HO 1.65 N729-28-021

5-9

CE

NT

ER

& T

UB

E Y

OK

E


NEW PARTS

TUBE WELD YOKE (Steel) - OUTSIDE LOCK-UP

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


1210 Series A-2.688 B-1.063STEEL 1210 2.000X.083 1.84 HO 1.50 20 N2-28-2417STEEL 1210 2.500X.065 2.38 HO 1.31 20 N2-28-1947

1310 Series A-3.469 B-1.063STEEL 1310 1.250X.120 1.02 HO 2.12 30 N2-26-347STEEL 1310 2.000X.065 1.88 HO 1.69 22 N2-28-417STEEL 1310 2.000X.083 1.84 HO 1.69 22 N2-28-357STEEL 1310 2.000X.095 1.82 HO 1.69 22 N2-28-577STEEL 1310 2.000X.120 1.77 HO 1.69 22 N2-28-1757STEEL 1310 2.500X.065 2.38 HO 1.84 30 N2-28-277STEEL 1310 2.500X.083 2.34 HO 1.84 30 N2-28-367STEEL 1310 2.750X.065 2.62 HO 1.69 21.5 N2-28-307STEEL 1310 2.750X.083 2.59 HO 1.69 21.5 N2-28-1617STEEL 1310 3.000X.065 2.88 HO 1.69 21.5 N2-28-327STEEL 1310 3.000X.083 2.84 HO 1.69 21.5 N2-28-437STEEL 1310 3.500X.065 3.38 HO 1.69 21.5 N2-28-397STEEL 1310 3.500X.083 3.34 HO 1.69 21.5 N2-28-427STEEL 1310 4.000X.065 3.88 HO 1.62 21.5 N2-28-021

5-10


NEW PARTS

TUBE WELD YOKE (Steel) - OUTSIDE LOCK-UP (Cont’d)

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


1330 Series A-3.875 B-1.063STEEL 1330 2.500X.083 2.34 HO 1.72 25 N2-28-1707STEEL 1330 3.000X.065 2.88 HO 1.72 25 N2-28-1177STEEL 1330 3.000X.083 2.84 HO 1.72 25 N2-28-1697STEEL 1330 3.500X.065 3.38 HO 1.81 N2-28-1977STEEL 1330 3.500X.083 3.34 HO 1.81 N2-28-1717STEEL 1330 4.000X.065 3.88 HO 1.69 22 N2-28-023STEEL 1330 4.000X.083 3.84 HO 1.69 22 N2-28-3637

1350 Series A-3.875 B-1.188STEEL 1350 2.500X.083 2.34 HO 1.94 20 N3-28-47STEEL 1350 2.750X.065 2.62 HO 2.00 20 N3-28-57-2STEEL 1350 2.750X.095 2.56 HO 2.00 20 N3-28-57-1STEEL 1350 3.000X.065 2.88 HO 2.00 20 N3-28-137STEEL 1350 3.000X.083 2.84 HO 2.00 20 N3-28-57STEEL 1350 3.500X.065 3.38 HO 1.81 20 N3-28-257STEEL 1350 3.500X.083 3.34 HO 1.81 20 N3-28-427STEEL 1350 4.000X.083 3.84 HO 1.69 22 N3-28-417

1410 Series A-4.438 B-1.188STEEL 1410 3.000X.083 2.84 HO 2.12 30 N3-28-97STEEL 1410 3.500X.065 3.38 HO 2.12 30 N3-28-367STEEL 1410 3.500X.083 3.34 HO 2.12 30 N3-28-557STEEL 1410 4.000X.083 3.84 HO 1.88 22 N3-28-457

5-11

CE

NT

ER

& T

UB

E Y

OK

E


NEW PARTS

TUBE WELD YOKE (Steel) - OUTSIDE LOCK-UP (Cont’d)

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


1480 Series A-4.438 B-1.375STEEL 1480 3.500X.083 3.34 HO 2.03 22 N3-28-537STEEL 1480 3.500X.083 3.34 HO 2.31 35 N3-28-547STEEL 1480 3.500X.095 3.31 HO 2.03 22 N3-28-567STEEL 1480 3.500X.134 3.24 HO 2.31 35 N3-28-548STEEL 1480 4.000X.083 3.84 HO 2.03 22.5 N3-28-507

1550 Series A-5.250 B-1.375STEEL 1550 3.500X.095 3.32 HO 2.19 22.5 N4-28-307STEEL 1550 3.500X.095 3.32 HO 2.69 35 N4-28-417

5-12


NEW PARTS

TUBE WELD YOKE (Aluminum) - OUTSIDE LOCK-UP

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


1310 Series A-3.469 B-1.063ALUMINUM 1310 3.000X.125 2.76 HO 2.03 — A31-28-3012ALUMINUM 1310 3.500X.125 3.26 HO 2.03 — A31-28-3512

1330 Series A-3.875 B-1.063ALUMINUM 1330 3.000X.125 2.76 HO 2.50 — A33-28-3012ALUMINUM 1330 3.500X.114 3.34 HO 3.90 — A33-28-3511ALUMINUM 1330 3.500X.125 3.26 HO 2.16 — A33-28-3512ALUMINUM 1330 5.000X.125 4.76 HO 3.45 — A33-28-5012

1350 Series A-3.875 B-1.188ALUMINUM 1350 3.500X.114 3.34 HO 3.90 — A35-28-3511ALUMINUM 1350 3.500X.125 3.26 HO 1.75 — A35-28-3512ALUMINUM 1350 4.000X.087 3.84 HO 3.90 — A35-28-4009ALUMINUM 1350 5.000X.125 4.76 HO 3.45 — A35-28-5012

1410 Series A-4.438 B-1.188ALUMINUM 1410 4.000X.087 3.84 HO 3.90 — A41-28-4009ALUMINUM 1410 5.000X.125 4.76 HO 3.45 — A41-28-5012

1480 Series A-4.438 B-1.375ALUMINUM 1480 5.000X.125 4.76 HO 3.45 — A48-28-5012

5-13

CE

NT

ER

& T

UB

E Y

OK

E


NEW PARTS

TUBE WELD YOKE - BEARING PLATE CONSTRUCTION

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


1610 Series A-5.312 B-11.875STEEL 1610 3.500X.095 3.31 HO 3.00 35 N5-28-167STEEL 1610 3.500X.134 3.25 HO 3.00 35 N5-28-627STEEL 1610 4.000X.134 3.75 HO 3.00 N5-28-327

1710 Series A-6.094 B-1.938STEEL 1710 3.500X.156 3.19 HO 3.03 22 N6-28-137STEEL 1710 4.000X.134 3.75 HO 3.03 N6-28-347STEEL 1710 4.000X.134 3.75 HO 3.69 45 N6-28-467STEEL 1710 4.500X.134 4.25 HO 3.03 22 N6-28-407

1760 Series A-7.000 B-1.938STEEL 1760 4.095X.180 3.75 HO 3.03 30 N6.3-28-17

1810 Series A-7.547 B-1.938STEEL 1810 4.500X.134 4.25 HO 3.38 30 N6.5-28-117STEEL 1810 4.500X.259 4.00 HO 3.38 30 N6.5-28-127

20R Series A-7.250 B-2.060STEEL 20R 4.095X.180 3.74 HO 3.70 30 N20RY60-6STEEL 20R 4.095X.180 3.74 HO 5.25 39 N20RY60-7

25R Series A-8.580 B-2.060STEEL 25R 4.590X.180 4.24 HO 3.70 24 N25RY68-3

5-14


NEW PARTS

TUBE WELD YOKE - PLATELOCK CONSTRUCTION

D E

MaterialDL

SeriesTubing Dia.

And WallButt Dia.

Type Of

Butt

CL To Point

Of Weld


SPL170 Series A-6.024 B-2.125STEEL SPL170 4.724X.197 4.35 HO 4.73 45 N170-28-27STEEL SPL170 4.960X.118 4.75 HO 3.69 25 N170-28-17

SPL250 Series A-5.984 B-2.361STEEL SPL250 5.196X.236 4.75 HO 4.10 25 N250-28-17

6-1

TUB

ING

/ YO

KE

& T

UB

E

6Shafting / Tubing / Yoke & Tube Assembly

● Solid Shafting● Aux. / P.T.O. Shafting and Tubing● Drive Shaft Tubing● Yoke and Tube Assembly

6-2

TUBING / YOKE & TUBE

NEW PARTS

AUX/PTO SOLID SHAFT - ROUND

Shaft Type DimensionsKeyway

DimensionsLength In

Inches Part NumberSolid Round 0.750 0.19 72 71-0750Solid Round 0.875 0.25 72 71-0875Solid Round 1.000 0.25 72 71-1000Solid Round 1.250 0.31 72 71-1250

6-3

TUB

ING

/ YO

KE

& T

UB

ETUBING / YOKE & TUBE

NEW PARTS

AUX/PTO SOLID SHAFT - RECTANGULAR


DimensionsLength In

Inches Part NumberSolid Rectangular .750X.875 — 72 73-0750Solid Rectangular 1.00x1.125 — 72 73-1001

6-4


NEW PARTS

AUX/PTO SOLID SHAFT - SQUARE


DimensionsLength In

Inches Part NumberSolid Square 0.750 — 72 72-0750Solid Square 0.875 — 72 72-0875Solid Square 1.000 — 72 72-1000Solid Square 1.188 — 72 73-1188Solid Square 1.313 — 72 73-1313

6-5

TUB

ING

/ YO

KE

& T

UB


NEW PARTS

AUX/PTO SOLID SHAFT - HEXAGON


DimensionsLength In

Inches Part NumberSolid Hexagon 0.875 — 72 72-0888Solid Hexagon 1.125 — 72 72-1125

6-6


NEW PARTS

AUX/PTO TUBING - ROUND

Shaft TypeOutside Diameter

Wall Thickness

Length In Inches

Part Number

Tubing Round 1.62 0.065 72 70-1625Tubing Round 2.00 0.083 72 70-2000Tubing Round 2.12 0.120 72 70-2125Tubing Round 2.25 0.120 72 70-2250Tubing Round 2.50 0.134 72 70-2500Tubing Round 2.75 0.109 72 70-2750

6-7

TUB

ING

/ YO

KE

& T

UB


NEW PARTS

AUX/PTO TUBING - RECTANGULAR

Shaft TypeOutside Diameter

Wall Thickness

Length In Inches

Part Number

Tubing Rectangular 1.00 X 1.13 0.125 72 70-1001Tubing Rectangular 1.25 X 1.38 0.130 72 70-1250

6-8


NEW PARTS

DRIVE SHAFT TUBING - ALUMINUM

A B C

MaterialTubing Type

Outside Diameter

Wall Thickness

Length In Inches Part Number

Aluminum Seamless 3.00 0.125 54 A24-30-42-54Aluminum Seamless 3.50 0.125 72 A28-30-42-72

6-9

TUB

ING

/ YO

KE

& T

UB


NEW PARTS

DRIVE SHAFT TUBING - STEEL

A B C

MaterialTubing Type

Outside Diameter

Wall Thickness


Steel AW 2.00 0.083 72 N16-30-62-72Steel AW 2.00 0.083 108 N16-30-62-108Steel AW 2.00 0.095 72 N16-30-42-72Steel AW 2.00 0.095 108 N16-30-42-108Steel AW 2.00 0.120 72 N16-30-102-72Steel AW 2.00 0.120 108 N16-30-102-108Steel AW 2.50 0.083 72 N20-30-22-72Steel AW 2.50 0.083 108 N20-30-22-108Steel AW 2.75 0.083 72 N22-30-22-72Steel AW 2.75 0.083 108 N22-30-22-108Steel AW 3.00 0.083 72 N24-30-42-72Steel AW 3.00 0.083 108 N24-30-42-108Steel AW 3.00 0.095 72 N24-30-12-72Steel AW 3.00 0.095 108 N24-30-12-108Steel AW 3.25 0.065 72 N26-30-12-72Steel AW 3.25 0.065 108 N26-30-12-108Steel AW 3.50 0.083 72 N28-30-62-72Steel AW 3.50 0.083 108 N28-30-62-108Steel AW 3.50 0.095 72 N28-30-22-72Steel AW 3.50 0.095 108 N28-30-22-108Steel AW 3.50 0.134 72 N28-30-92-72Steel AW 3.50 0.134 108 N28-30-92-108Steel AW 3.50 0.156 72 N28-30-52-72Steel AW 3.50 0.156 108 N28-30-52-108Steel AW 4.00 0.083 72 N32-30-22-72

6-10


NEW PARTS

DRIVE SHAFT TUBING - STEEL (Cont’d)

A B C

MaterialTubing Type

Outside Diameter

Wall Thickness


Steel AW 4.00 0.083 108 N32-30-22-108Steel AW 4.00 0.134 72 N32-30-52-72Steel AW 4.00 0.134 108 N32-30-52-108Steel DOM 1.25 0.120 72 ND10-32-92-72Steel DOM 1.25 0.120 108 ND10-32-92-108Steel DOM 2.00 0.065 108 ND16-30-32-108Steel DOM 2.00 0.083 72 ND16-30-62-72Steel DOM 2.00 0.083 108 ND16-30-62-108Steel DOM 2.00 0.120 72 ND16-30-102-72Steel DOM 2.00 0.120 108 ND16-30-102-108Steel DOM 2.50 0.065 72 ND20-30-12-72Steel DOM 2.50 0.065 108 ND20-30-12-108Steel DOM 2.50 0.083 72 ND20-30-22-72Steel DOM 2.50 0.083 108 ND20-30-22-108Steel DOM 2.50 0.095 108 ND20-30-52-108Steel DOM 2.50 0.120 72 ND20-30-62-72Steel DOM 2.75 0.065 72 ND22-30-12-72Steel DOM 2.75 0.065 108 ND22-30-12-108Steel DOM 2.75 0.083 72 ND22-30-22-72Steel DOM 2.75 0.083 108 ND22-30-22-108Steel DOM 3.00 0.065 72 ND24-30-32-72Steel DOM 3.00 0.065 108 ND24-30-32-108Steel DOM 3.00 0.083 72 ND24-30-42-72Steel DOM 3.00 0.083 108 ND24-30-42-108Steel DOM 3.50 0.065 72 ND28-30-42-72

6-11

TUB

ING

/ YO

KE

& T

UB


NEW PARTS

DRIVE SHAFT TUBING - STEEL (Cont’d)

A B C

MaterialTubing Type

Outside Diameter

Wall Thickness


Steel DOM 3.50 0.065 108 ND28-30-42-108Steel DOM 3.50 0.083 72 ND28-30-62-72Steel DOM 3.50 0.083 108 ND28-30-62-108Steel DOM 4.00 0.065 72 TD-143Steel DOM 4.00 0.083 72 ND32-30-22-72Steel DOM 4.00 0.083 108 ND32-30-22-108Steel DOM 4.00 0.095 72 ND32-30-12-72Steel DOM 4.00 0.095 108 ND32-30-12-108Steel DOM 4.095 0.180 72 ND32-30-72-72Steel DOM 4.095 0.180 108 ND32-30-72-108Steel DOM 4.50 0.134 72 ND36-30-62-72Steel DOM 4.50 0.134 108 ND36-30-62-108Steel DOM 4.50 0.259 72 ND36-30-22-72Steel DOM 4.50 0.259 108 ND36-30-22-108Steel DOM 4.59 0.180 72 ND36-30-102-72Steel DOM 4.59 0.180 108 ND36-30-102-108Steel DOM 4.73 0.197 72 ND110-30-5-72Steel DOM 4.96 0.118 72 ND120-30-3-72Steel DOM 5.06 0.167 72 ND120-30-4-72Steel DOM 5.12 0.197 72 ND120-30-5-72Steel DOM 5.20 0.236 72 ND120-30-6-72

6-12


NEW PARTS

YOKE & TUBE ASSEMBLY

D

DL SeriesDiameter And

Wall ThicknessCenter To

End Of Tube Part Number1310 Series A-3.469 B-1.063

1310 2.000X.083 49.44 N2-27-7-47241310 2.500X.083 62.38 N2-27-9-60171310 3.000X.083 61.69 N2-27-24-6000

1330 Series A-3.875 B-1.0631330 3.000X.083 61.72 N2-27-30-60001330 3.500X.083 73.81 N2-27-35-7200

1350 Series A-3.875 B-1.1881350 3.000X.083 66.00 N3-27-2-64001350 3.500X.083 73.81 N3-27-7-7200

1410 Series A-4.438 B-1.1881410 3.000X.083 65.03 N3-27-3-62291410 3.500X.083 73.81 N3-27-4-7200

1480 Series A-4.438 B-1.3751480 3.500X.083 63.34 N3-27-22-6110

7-1

STU

B S

HA

FT

● CV Flange Stub● Splined Mid-Ship● Splined Mid-Ship Cap Screw & Shaft Nut● Slip Stub

Stub Shaft7

7-2

STUB SHAFT

NEW PARTS

CV FLANGE STUB

E G HDL Se-

riesSpline / Number

Teeth

Bolt Circle

Hole/Thread

Size


Pilot Dia.

Flange Face To

End

Part Number

1310 1.375-32 3.00 0.38 4 2.00-M 6.38 N2-81-1181

7-3

STU

B S

HA

FT

STUB SHAFT

NEW PARTS

SPLINED MID-SHIP - FOR OUTBOARD SLIP YOKES

A E B C F G H

Spline / Number

Teeth

Bear-ing Dia.


Butt Dia.

Length Of

Spline

End Of Spline

To Point

Of Weld

End Of Spline

To Bear-ing

Shoul-der

Shoul-der Dia.

Length Of

Shoul-der

PartNumber

1.375-15/16 1.378 2.750X.065 2.62 2.50 8.84 7.78 1.69 0.81 N2-53-711-1

1.375-15/16 1.378 3.000X.065 2.88 2.50 8.84 7.78 1.69 0.81 N2-53-691

1.375-15/16 1.378 3.000X.083 2.84 2.50 8.84 7.78 1.69 0.81 N2-53-711

1.375-16 — 1.620X.205 1.22 2.50 9.00 7.47 — — N2-53-9170-5

1.375-16 — 2.750X.065 2.62 2.50 8.84 — — — N2-53-9170-2

1.375-16 1.378 2.500X.065 2.38 4.97 8.09 6.75 1.72 1.12 N3-53-1351-1

1.375-16 1.378 2.500X.083 2.34 4.97 8.09 6.75 1.72 1.12 N3-53-1351

1.375-16 1.378 2.500X.083 2.34 5.41 8.00 6.94 1.69 0.81 N2-53-471

1.375-16 1.378 3.000X.065 2.88 5.41 8.00 6.94 1.69 0.81 N2-53-491

1.375-16 1.378 3.000X.083 2.84 4.44 7.03 5.97 1.69 0.81 N3-53-1371

1.375-16 1.378 3.000X.083 2.84 4.97 8.09 6.75 1.72 1.12 N3-53-1361

1.375-16 1.378 3.000X.083 2.84 5.41 8.00 6.94 1.69 0.81 N2-53-501

1.375-31/32 — 1.620X.205 1.22 3.38 9.00 7.47 — — N3-53-1181-5

1.375-31/32 1.378 2.750X.065 2.62 3.38 8.81 7.47 1.72 1.12 N3-53-1181-2

1.375-31/32 1.378 2.750X.095 2.57 3.38 8.81 7.47 1.72 1.12 N3-53-1181-1

1.375-31/32 1.378 3.000X.083 2.84 3.38 8.81 7.47 1.72 1.12 N3-53-1181

1.500-16 1.575 3.000X.083 2.84 4.44 7.06 5.94 1.81 0.88 N3-53-1031

1.562-16 1.575 3.500X.083 3.34 5.94 8.53 7.47 1.94 0.81 N3-53-451

1.750-16 1.772 3.500X.095 3.31 5.94 8.56 7.47 2.19 0.81 N4-53-61

7-4

STUB SHAFT

NEW PARTS

MID-SHIP - CAP SCREW & SHAFT NUT TYPE

A E B C D F G H

Spline / Number

TeethBearing

Dia.Tubing Dia. And Wall

Butt Dia.

Length Of

Spline

End Of Spline

To Point

Of Weld

Thread Size

End Of Spline

To Bear-ing

Shoul-der

Shoul-der Dia.

Length Of

Shoul-der Part Number

1.125-26 1.181 2.500X.065 2.38 1.38 3.50 0.63-18-M 2.03 1.48 0.85 N2-53-1011-11.375-10 1.378 2.500X.083 2.34 1.75 3.75 1.00-20-M 2.69 1.69 0.81 N2-53-11911.375-10 1.378 3.000X.083 2.84 1.69 4.00 1.00-20-M 2.66 1.72 1.12 N3-54-6111.375-10 1.378 3.000X.083 2.84 1.96 3.97 0.50-20F 2.92 2.06 0.81 N3-53-1911.500-10 1.575 3.000X.083 2.84 1.94 3.88 1.00-20-M 2.75 1.81 0.88 N3-53-17811.500-10 1.575 3.500X.083 3.34 1.81 3.88 0.75-16-F 2.75 1.81 0.88 N3-53-10811.500-10 1.575 3.500X.083 3.34 1.88 4.03 0.75-16-F 2.97 1.94 0.81 N3-53-4311.500-10 1.575 3.500X.083 3.34 1.94 3.88 1.00-20-M 2.75 1.81 0.88 N3-53-17911.500-10 1.575 3.500X.095 3.31 1.88 4.03 0.75-16-F 2.97 1.94 0.81 N4-53-711.750-10 1.772 3.500X.134 3.24 2.1 4.34 1.25-18-M 3.25 2.19 0.81 N5-53-1411.750-10 1.772 4.000X.134 3.73 2.28 4.34 1.25-18-M 3.25 2.19 0.81 N5-53-1911.750-34 1.772 4.000X.134 3.74 2.15 4.22 1.25-18-M 3.12 2.19 0.81 N5-53-2711.950-38 1.968 4.000X.134 3.74 2.84 5.16 1.25-18-M 4.06 2.44 0.81 N6-53-4111.953-10 1.968 3.500X.156 3.19 2.88 5.16 1.25-18-M 4.06 2.44 0.81 N6-53-1511.953-10 1.968 4.000X.134 3.75 2.88 5.16 1.25-18-M 4.06 2.44 0.81 N6-53-2011.953-10 1.968 4.000X.134 3.75 2.88 5.55 1.25-18-M 4.06 2.44 0.81 N6-53-201-11.953-10 1.968 4.500X.134 4.25 2.88 5.16 1.25-18-M 4.06 2.44 0.81 N6-53-2412.349-16 2.362 4.000X.134 3.75 2.62 5.31 1.25-18-M 4.00 2.88 0.81 N6-53-3112.349-16 2.362 4.500X.134 4.25 2.62 5.31 1.25-18-M 4.00 2.88 0.81 N6.5-53-912.349-16 2.362 4.500X.259 4.00 2.75 5.44 1.25-18-M 4.00 2.88 0.81 N6.5-53-512.350-46 2.362 4.095X.180 3.74 2.72 5.31 1.25-18-M 4.00 2.88 0.81 N6.3-53-212.350-46 2.362 4.500X.259 4.00 2.72 5.31 1.25-18-M 4.00 2.88 0.81 N6.5-53-1812.350-46 2.362 4.590X.180 4.24 2.72 5.31 1.25-18-M 4.00 2.88 0.81 N6.5-53-1712.350-46 2.362 5.196X.236 4.75 2.72 5.31 1.25-18-M 4.00 2.88 0.81 N250-53-11

7-5

STU

B S

HA

FT

STUB SHAFT

NEW PARTS

SLIP STUB SHAFT

E B F CSpline / Number

Teeth

Tubing Di-ameter And

Wall

Butt Dia.

Length Of Spline

End Of Spline To Radius

End Of Spline

To Weld

Part Number

1.250-16 1.250X.120 1.03 2.00 5.38 6.12 N2-40-17711.250-16 2.000X.083 1.84 2.00 4.19 4.75 N2-40-971-21.250-16 2.000X.083 1.84 2.00 5.41 6.00 N2-40-17411.250-16 2.000X.120 1.77 2.00 5.41 6.00 N2-40-23811.250-16 2.500X.065 2.38 2.00 5.41 6.12 N2-40-22111.250-16 2.500X.065 2.38 2.50 6.84 7.56 N2-40-23011.375-16 — 1.25 2.50 — 24-OAL N2-40-138-21.375-16 2.000X.083 1.84 2.25 4.62 5.19 N2-40-10311.375-16 2.000X.083 1.84 2.25 6.12 6.69 N2-40-1841-11.375-16 2.000X.120 1.77 2.25 5.62 6.19 N2-40-17011.375-16 2.000X.120 1.77 2.25 6.12 6.69 N2-40-1701-11.375-16 2.000X.120 1.77 6.25 7.25 7.75 N2-40-1701-21.375-16 2.500X.065 2.38 2.25 5.62 6.34 N2-40-18111.375-16 2.500X.065 2.38 2.25 6.12 6.84 N2-40-12911.375-16 2.500X.083 2.34 2.25 5.62 6.34 N2-40-17111.375-16 2.500X.083 2.34 2.25 6.81 7.53 N2-40-18511.375-16 2.500X.095 2.32 2.25 5.62 6.34 N2-40-17121.375-16 2.500X.095 2.32 2.25 6.81 7.53 N2-40-19511.375-16 2.500X.095 2.32 3.38 7.25 8.12 N2-40-2791-11.375-16 2.750X.065 2.62 2.25 5.62 6.44 N2-40-1221-11.375-16 3.000X.065 2.88 2.25 5.62 6.44 N2-40-12211.375-16 3.000X.065 2.88 2.25 6.81 7.62 N2-40-20511.375-16 3.000X.083 2.84 2.25 5.62 6.44 N2-40-15211.375-16 3.000X.083 2.84 2.25 6.81 7.62 N2-40-2231

7-6

STUB SHAFT

NEW PARTS

SLIP STUB SHAFT (Cont’d)


Teeth


Wall

Butt Dia.

Length Of Spline


End Of Spline

To Weld

Part Number

1.375-16 3.000X.083 2.84 6.78 7.83 8.64 N2-40-18711.375-16 3.500X.065 3.38 2.25 5.56 6.56 N2-40-12311.375-16 3.500X.083 3.34 2.25 5.62 6.62 N2-40-15311.375-16 3.500X.083 3.34 6.97 7.97 8.97 N2-40-20911.500-16 2.500X.083 2.34 2.50 4.97 5.62 N3-40-14711.500-16 2.500X.095 2.23 2.50 4.97 5.62 N3-40-14721.500-16 2.750X.083 2.59 2.50 6.44 7.25 N3-40-12221.500-16 3.000X.083 2.84 2.50 5.12 5.94 N3-40-11011.500-16 3.000X.083 2.84 2.50 6.44 7.25 N3-40-16111.500-16 3.500X.083 3.34 2.50 6.41 7.34 N3-40-15611.500-16 3.500X.083 3.34 3.00 5.62 6.56 N3-40-15311.500-16 3.500X.083 3.34 3.00 6.59 7.53 N3-40-14911.563-16 3.500X.083 3.34 3.00 5.81 6.75 N3-40-15711.563-16 3.500X.083 3.34 3.00 7.81 8.75 N3-40-13911.750-16 3.500X.095 3.31 3.00 5.81 6.78 N4-40-7611.750-16 3.500X.095 3.31 3.00 8.25 9.22 N4-40-7212.000-16 3.500X.095 3.31 3.50 8.66 9.56 N5-40-5012.000-16 3.500X.134 3.24 3.50 6.56 7.56 N5-40-11912.000-16 3.500X.134 3.24 3.50 8.78 9.69 N5-40-10112.000-16 3.500X.134 3.24 3.50 9.28 10.19 N5-40-10412.000-16 4.000X.134 3.74 3.50 8.80 9.85 N5-40-10512.500-16 3.500X.156 3.19 4.00 8.38 9.25 N6-40-7412.500-16 4.000X.134 3.74 4.00 8.25 9.25 N6-40-5412.500-16 4.000X.134 3.74 4.00 9.56 10.56 N6-40-521

7-7

STU

B S

HA

FT

STUB SHAFT

NEW PARTS

SLIP STUB SHAFT (Cont’d)


Teeth


Wall

Butt Dia.

Length Of Spline


End Of Spline

To Weld

Part Number

2.500-16 4.095X.180 3.74 4.70 — 9.92 NPS40-16-612.500-16 4.500X.134 4.24 4.00 8.31 9.50 N6-40-6312.500-16 4.500X.134 4.24 4.00 9.47 10.66 N6-40-6213.000-16 4.500X.134 4.24 4.50 10.03 11.25 N6.5-40-1913.000-16 4.500X.134 4.24 4.50 8.41 9.47 N6.5-40-2013.000-16 4.500X.259 4.00 4.50 10.25 11.53 N8-40-1013.000-16 4.590X.180 4.24 4.70 — 10.13 NPS48-16-38

8-1

YOK

E S

HA

FT

● Inside Lock-Up ● Outside Lock-Up ● Bearing Plate Construction ● PlateLock Construction

Yoke Shaft8

8-2

YOKE SHAFT

NEW PARTS

INSIDE LOCK-UP

D E G F

DL Series

Spline / Number

Teeth

Length Of

Spline

End Of Spline

ToRadius

CL To End Of Tube

CL To End Of Spline


3R Series A-3.563 B-1.125 C-2.563

3R 1.375-32 3.35 5.91 — 7.81 22.5 N3R-82-1181

8-3

YOK

E S

HA

FT

YOKE SHAFT

NEW PARTS

OUTSIDE LOCK-UP

D E G F

DL Series

Spline / Number

Teeth

Length Of

Spline

End Of Spline

ToRadius

CL To End Of Tube

CL To End Of Spline


1310 Series A-3.469 B-1.0631310 1.250-16 1.88 3.42 — 5.12 20 N2-82-511310 1.375-16 2.25 3.56 — 5.31 16 N2-82-21

1350 Series A-3.875 B-1.1881350 1.500-16 2.00 3.06 — 5.19 20 N3-82-611350 1.500-16 2.50 4.69 — 6.81 20 N3-82-181

1410 Series A-4.438 B-1.1881410 1.500-16 2.00 3.25 — 4.97 16 N3-82-1191

1480 Series A-4.438 B-1.3751480 1.562-16 2.75 4.50 — 6.75 23 N3-82-1121

1550 Series A-5.250 B-1.3751550 1.750-16 1.44 2.50 — 4.75 8 N4-82-341

8-4

YOKE SHAFT

NEW PARTS


D E G F

DL Series

Spline / Number

Teeth

Length Of

Spline

End Of Spline

ToRadius

CL To End Of Tube

CL To End Of Spline


1610 Series A-5.321 B-1.8751610 2.000-16 2.88 5.40 — 9.22 30 N5-82-01

1710 Series A-6.094 B-1.9381710 2.500-16 3.50 8.01 — 12.09 45 N6-82-12811710 2.500-16 3.50 9.01 — 13.09 45 N6-82-1281-11710 2.500-16 4.00 10.95 — 15.03 45 N6-82-1341-71710 2.500-16 4.00 9.92 — 14.00 45 N6-82-1341-4

20R Series A-7.250 B-2.06020R 2.500-16 3.45 10.73 — 15.20 42 N20RYSM40-5120R 2.500-16 3.45 9.42 — 13.45 42 N20RYSM40-47

8-5

YOK

E S

HA

FT

YOKE SHAFT

NEW PARTS

PLATELOCK CONSTRUCTION

D E G F

DL Series

Spline / Number

Teeth

Length Of

Spline

End Of Spline

ToRadius

CL To End Of Tube

CL To End Of Spline


SPL-170 Series A-6.024 B-2.165SPL170 3.465-34 6.99 9.13 7.82 13.82 45 N170-82-71XSPL170 3.858-38 5.69 7.81 7.12 11.81 25 N170-82-21X

SPL-250 Series A-5.984 B-2.361SPL250 3.858-38 5.69 7.81 7.12 11.81 25 N250-82-21X

9-1

DR

IVE

SH

AFT

& D

.C.

Driveshaft & Double Cardan C.V.

● Double Cardan C.V. Repair Kit● Double Cardan C.V. Head Assembly● Double Cardan C.V. Head Components● PTO / AUX Shaft● PTO / AUX Shaft Components● Drive Shaft● Drive Shaft Components● PTO / AUX Shaft Shielding System

9

9-2

DRIVESHAFT & DOUBLE CARDAN C.V.

NEW PARTS

DOUBLE CARDAN C.V. BALL SEAT REPAIR KIT

A B C D

ManufacturerBall Dia. Stud

Bore Dia.Seal Out-side Dia.

Seal Height

Part Number

Saginaw 0.88 0.60 — — 2-9303Saginaw 0.91 0.46 1.24 0.17 2-9302Saginaw 0.91 0.62 — — 2-9301

9-3

DR

IVE

SH

AFT

& D

.C.


NEW PARTS

DOUBLE CARDAN C.V. BALL SEAT REPAIR KIT

A B C D

ManufacturerBall Dia. Stud

Bore Dia.Seal Out-side Dia.

Seal Height

Part Number

Spicer 1.12 0.50 1.34 0.16 7-0081NGSpicer 1.12 0.50 1.45 0.38 7-0081Toyota 1.34 0.47 1.42 — 7-0407Toyota 1.46 0.51 1.52 — 7-0409

9-4


NEW PARTS

DOUBLE CARDAN C.V. HEAD ASSEMBLY

D B F G H I A

DL Se-ries

DC Head Style


Butt Dia.

CL To Point

Of Weld

CL To

CL Of Cen-ter

YokePilot Dia.

Bolt Cir-cle

Bolt Hole Spac-

ing Height

Bolt Hole Spac-

ing Width

Hole/Thread

Size

Over-all

Length

Joint An-gle

Part Number

1310 Series1310 Flange 2.000

X.1201.77 1.44 2.69 2.00 3.50 — — 0.49 5.75 26 N913877

1310 Flange 2.000 X.120

1.77 1.44 2.69 2.00 3.50 — — 0.49 5.75 26 N913877G

1310 Flange 2.500 X.083

2.34 1.44 2.69 2.00 3.50 — — 0.49 5.75 26 N919279

1310 Flange 2.500 X.083

2.34 1.44 2.69 2.00 3.50 — — 0.49 5.75 26 N919279G

1310 Flange Stub

2.000 X.120

1.77 1.44 2.69 2.00 3.00 — — 0.38-24UNF

12.12 26 N913601

1310 Flange Stub

2.000 X.120

1.77 1.44 2.69 2.00 3.00 — — 0.38-24UNF

12.12 26 N913601G

1310 Flange Stub

3.000 X.083

2.84 1.44 2.69 2.00 3.00 — — 0.38-24UNF

12.12 26 N913600

1310 Half Round

2.000 X.120

1.77 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912777

1310 Half Round

2.000 X.120

1.77 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912777G

1310 Half Round

2.500 X.083

2.34 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912747

1310 Half Round

2.500 X.083

2.34 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912747G

1310 Half Round

3.000 X.083

2.84 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912937

1310 Half Round

3.000 X.083

2.84 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912937G

9-5

DR

IVE

SH

AFT

& D

.C.


NEW PARTS

DOUBLE CARDAN C.V. HEAD COMPONENTS

1 2 3 4

DL Series

DC Head Style

Ball Stud Yoke H Yoke Socket Yoke

Flange Adapter U-Joint

TubingDia.AndWall

Part Number

1310 Series1310 Flange N2-28-2947X N2-26-367 N2-83-388X — 1-0154 2.00

X.120N913877

1310 Flange N2-28-2867X N2-26-367 N2-83-543X — 1-0153G 2.00 X.120

N913877G

1310 Flange N2-28-2957X N2-26-367 N2-83-388X — 1-0154 2.50 X.083

N919279

1310 Flange N2-28-2887X N2-26-367 N2-83-543X — 1-0153G 2.50 X.083

N919279G

1310 Flange Stub

N2-28-2947X N2-26-367 N2-83-599X N2-81-1181 1-0154 2.00 X.120

N913601

1310 Flange Stub

N2-28-2947X N2-26-367 N2-83-599X N2-81-1181 1-0153G 2.00 X.120

N913601G

1310 Flange Stub

N2-28-2977X N2-26-367 N2-83-599X N2-81-1181 1-0154 3.00 X.083

N913600

1310 Half Round

N2-28-2947X N2-26-367 7-0082 — 1-0154 2.00 X.120

N912777

1310 Half Round

N2-28-2867X N2-26-367 7-0082G — 1-0153G 2.00 X.120

N912777G

1310 Half Round

N2-28-2957X N2-26-367 7-0082 — 1-0154 2.50 X.083

N912747

1310 Half Round

N2-28-2887X N2-26-367 7-0082NG — 1-0153G 2.50 X.083

N912747G

1310 Half Round

N2-28-2977X N2-26-367 7-0082 — 1-0154 3.00 X.083

N912937

1310 Half Round

N2-28-2927X N2-26-367 7-0082NG — 1-0153G 3.00 X.083

N912937G

9-6


NEW PARTS


D B F G H I A

DL Se-ries

DC Head Style


Butt Dia.

CL To Point

Of Weld

CL To

CL Of Cen-ter

YokePilot Dia.

Bolt Cir-cle

Bolt Hole Spac-

ing Height

Bolt Hole Spac-

ing Width

Hole/Thread

Size

Over-all

Length

Joint An-gle

Part Number

1330 Series1330 Half

Round2.000 X.120

1.77 1.38 2.75 — — 2.88 1.50 0.31-24UNF

4.12 18 N910810

1330 Half Round

2.500 X.083

2.34 1.38 2.75 — — 2.88 1.50 0.31-24UNF

4.12 18 N910811

1330 Half Round

2.500 X.083

2.34 1.38 2.75 — — 2.88 1.50 0.31-24UNF

4.12 18 N910811G

1330 Half Round

3.000 X.065

2.88 1.44 2.75 — — 2.88 1.50 0.31-24UNF

4.19 18 N910812


X.1201.77 1.44 2.88 2.00 4.25 — — M12

X1.755.94 32 N921048G

1350 Flange 2.000 X.120

1.77 1.44 2.88 3.12 4.25 — — 0.46 5.94 32 N921049

1350 Flange 2.000 X.120

1.77 1.44 2.88 3.12 4.25 — — 0.46 5.94 32 N921049G

1350 Flange 2.500 X.095

2.32 1.44 2.88 2.16 3.94 — — 0.48 5.94 32 N921056

1350 Flange 2.500 X.095

2.32 1.44 2.88 2.16 3.94 — — 0.48 5.94 32 N921056G

1350 Flange 2.500 X.095

2.32 1.44 2.88 3.12 4.25 — — 0.46 5.94 32 N921050

1350 Flange 2.500 X.095

2.32 1.44 2.88 3.12 4.25 — — 0.46 5.94 32 N921050G

1350 Flange 2.750 X.083

2.59 1.47 2.88 2.00 4.25 — — M12 X1.75

5.97 32 N921052

9-7

DR

IVE

SH

AFT

& D

.C.


NEW PARTS


1 2 3 4

DL Series

DC Head Style



TubingDia.AndWall

Part Number


RoundN2-28-2157X N2-26-527 7-0079 — 2-4801 2.00

X.120N910810

1330 Half Round

N2-28-2137X N2-26-527 7-0079 — 2-4801 2.50X.083

N910811

1330 Half Round

N2-28-3067X N2-26-527 7-0079G — 2-4800G 2.50 X.083

N910811G

1330 Half Round

N2-28-2117X N2-26-527 7-0079 — 2-4801 3.00 X.065

N910812

1350 Series1350 Flange N3-28-2947X N3-26-757 N3-83-024X — 2-0053G 2.00

X.120N921048G

1350 Flange N3-28-2947X N3-26-757 N3-83-3281X — 2-0052 2.00 X.120

N921049

1350 Flange N3-28-2947X N3-26-757 N3-83-3281X — 2-0053G 2.00 X.120

N921049G

1350 Flange N3-28-3281X N3-26-757 N3-83-3281X — 2-0052 2.50 X.095

N921050

1350 Flange N3-28-3281X N3-26-757 N3-83-3281X — 2-0053G 2.50 X.095

N921050G

1350 Flange N3-28-3281X N3-26-757 N3-83-072X — 2-0052 2.50 X.095

N921056

1350 Flange N3-28-3281X N3-26-757 N3-83-072X — 2-0053G 2.50 X.095

N921056G

1350 Flange N3-28-1747-1X

N3-26-757 N3-83-024X — 2-0052 2.75 X.083

N921052

9-8


NEW PARTS


D B F G H I A

DL Se-ries

DC Head Style


Butt Dia.

CL To Point

Of Weld

CL To

CL Of Cen-ter

YokePilot Dia.

Bolt Cir-cle

Bolt Hole Spac-

ing Height

Bolt Hole Spac-

ing Width

Hole/Thread

Size

Over-all

Length

Joint An-gle

Part Number

1350 Series (Cont’d)1350 Flange 2.750

X.0832.59 1.47 2.88 2.00 4.25 — — M12

X1.755.97 32 N921052G

1350 Flange 3.000 X.083

2.84 1.47 2.88 2.00 4.25 — — M12 X1.75

5.97 32 N921053

1350 Flange 3.000 X.083

2.84 1.47 2.88 2.00 4.25 — — M12 X1.75

5.97 32 N921053G

1350 Flange 3.500 X.083

3.34 1.50 2.88 2.68 4.25 — — M12 X1.75

6.00 32 N921054

1350 Flange 3.500 X.083

3.34 1.50 2.88 2.68 4.25 — — M12 X1.75

6.00 32 N921054G


X.1202.26 2.10 3.48 3.12 4.25 — — 0.46 7.32 22 N924141G

1410 Flange 2.500 X.120

2.26 2.10 3.48 3.12 4.25 — — 0.46 7.32 30 N924141HAG

9-9

DR

IVE

SH

AFT

& D

.C.


NEW PARTS


1 2 3 4

DL Series

DC Head Style



TubingDia.AndWall

Part Number

1350 Series (Cont’d)1350 Flange N3-28-1747-

1XN3-26-757 N3-83-024X — 2-0053G 2.75X

.083N921052G

1350 Flange N3-28-1327-1X

N3-26-757 N3-83-024X — 2-0052 3.00 X.083

N921053

1350 Flange N3-28-1327-1X

N3-26-757 N3-83-024X — 2-0053G 3.00 X.083

N921053G

1350 Flange N3-28-1527-1X

N3-26-757 N3-83-025X — 2-0052 3.50 X.083

N921054

1350 Flange N3-28-1527-1X

N3-26-757 N3-83-025X — 2-0053G 3.50 X.083

N921054G

1410 Series1410 Flange NA NA NA — 2-0054G 2.50

X.120N924141G

1410 Flange NA NA NA — 2-0054G 2.50 X.120

N924141HAG

9-10


NEW PARTS

PTO / AUX SHAFT

B A A C

DL Series

Driveshaft Style Tube Size

Maximum Extended

Length

Com-pressed Length

Yoke/CV And Tube Length Part Number

1000 Series1000 Unwelded-1 2.000X.083 65.12 63.12 56.91 N10270-SF1000 Unwelded-1 2.000X.083 68.46 66.46 60.25 N10270-SFG1000 Unwelded-2 2.000X.083 65.03 — 60.25 N10271-SF1000 Welded-15 2.000X.083 41.00 28.00 — UTS10-2323981000 Welded-15 2.000X.083 59.00 39.00 — UTS10-2334981000 Welded-15 2.000X.083 59.00 39.00 — UTS10-2334EH1000 Welded-15 2.000X.083 72.00 52.00 — UTS10-2352981000 Welded-16 2.000X.083 56.50 36.50 — UTS10-984099

1310 Series1310 Unwelded-1 2.000X.083 57.69 55.69 49.44 N9553-SF1310 Unwelded-3 1.250 28.44 26.12 25.06 N91382-SF

9-11

DR

IVE

SH

AFT

& D

.C.


NEW PARTS

PTO / AUX SHAFT - COMPONENTS

2 3 6 7DL Se-ries

Driveshaft Style U-Joint

Slip Yoke

Dust Cap Stub Shaft

Tube Weld Yoke

End Yoke

Flange Yokes

PartNumber

1000 Series1000 Unwelded-1 1-0170 10-0318 280196 N2-40-971-2 10-1005 — — N10270-SF1000 Unwelded-1 1-0170

NPL10-0318 280196 N2-40-971-2 10-1005 — — N10270-SFG

1000 Unwelded-2 1-0170 — — 10-0699 10-1005 10-0493 — N10271-SF1000 Welded-15 1-0170 — — — 10-1005 10-4143 — UTS10-2323981000 Welded-15 1-0170 — — — 10-1005 10-4143 — UTS10-2334981000 Welded-15 1-0170 — — — 10-1005 10-4143 — UTS10-2334EH1000 Welded-15 1-0170 — — — 10-1005 10-4143 — UTS10-2352981000 Welded-16 1-0170 — — — — — — UTS10-984099

1310 Series1310 Unwelded-1 1-0153 N2-3-

128KX280194 N2-40-1031 N2-28-357 — — N9553-SF

1310 Unwelded-3 1-0153 N2-3-7981KX

280194 N2-40-138-2 — N2-4-533-1

— N91382-SF

9-12


NEW PARTS

PTO / AUX SHAFT

B A A C

DL Series


Maximum Extended

Length

Com-pressed Length


1350 Series1350 Unwelded-1 2.500X.083 63.08 61.08 54.19 N7703-SF1350 Unwelded-1 2.500X.083 63.08 61.08 54.19 N7713-SF1350 Welded-13 3.000X.083 37.81 35.81 — N135-36-SLBP

1410 Series1410 Welded-13 3.500X.083 37.72 34.28 — N141-36-SLBP1410 Welded-13 3.500X.083 49.75 46.25 — N141-48-SLBP

1480 Series1480 Welded-13 3.500X.083 36.87 35.25 — N148-36-SLBP



9-13

DR

IVE

SH

AFT

& D

.C.


NEW PARTS


2 3 6 7DL Se-ries


Slip Yoke

Dust Cap Stub Shaft

Tube Weld Yoke

End Yoke

Flange Yokes

PartNumber

1350 Series1350 Unwelded-1 2-0053 N3-3-

598KXND3A N3-40-1471 N3-28-47 — — N7703-SF

1350 Unwelded-1 2-0052 N3-3-598KX

ND3A N3-40-1471 N3-28-47 — — N7713-SF

1350 Welded-13 2-0053 — — — — — N3-2-119 N135-36-SLBP

1410 Series1410 Welded-13 2-0054 — — — — — N3-2-159 N141-36-SLBP1410 Welded-13 2-0054 — — — — — N3-2-159 N141-48-SLBP

1480 Series1480 Welded-13 3-0188 — — — — — N3-2-479 N148-36-SLBP



9-14


NEW PARTS

PTO / AUX SHAFT

B A A C

DL Series


Maximum Extended

Length

Com-pressed Length




9-15

DR

IVE

SH

AFT

& D

.C.


NEW PARTS


2 3 6 7DL Se-ries


Slip Yoke

Dust Cap Stub Shaft

Tube Weld Yoke

End Yoke

Flange Yokes

PartNumber


1810 Series1810 Welded-13 6-0281 — — — — — N6.5-2-

329N181-36-SLBP

1810 Welded-13 6-0281 — — — — — N6.5-2-329

N181-48-SLBP

9-16


NEW PARTS

DRIVE SHAFT - DIAGRAMS

9-17

DR

IVE

SH

AFT

& D

.C.


NEW PARTS

DRIVE SHAFT - DIAGRAMS

9-18


NEW PARTS

DRIVE SHAFT - STEEL

B A A C

DL Series Driveshaft Style Tube Size

Maximum Extended

Length

Com-pressed Length


1310 Series1310 Unwelded CV-7 2.000X.120 45.94 42.84 35.12 N909365-2600

1310 Unwelded CV-7 2.500X.083 48.32 44.19 35.12 N909363-2600

1310 Unwelded CV-7 2.500X.083 48.32 44.19 35.12 N909363G-2600

1310/1350 Series1310/1350 Unwelded CV-8 2.000X.120 37.38 34.28 26.56 S91397-2000

1330 Series1330 Unwelded CV-7 2.500X.083 42.91 38.75 30.12 N911818-2600

1330/1350 Series1330/1350 Unwelded CV-8 2.500X.095 36.02 33.35 25.94 N921056X-2000

1330/1350 Unwelded CV-8 2.500X.095 38.06 35.18 25.94 N921050-2000

1350 Series1350 Unwelded CV-14 2.500X.095 36.95 35.45 25.94 N921050G-2010

1350 Unwelded CV-8 2.500X.095 38.06 35.18 25.94 N921050-2007

1350 Unwelded CV-8 2.750X.083 48.34 44.5 35.97 N921052-3000

1350 Unwelded CV-8 2.750X.083 48.34 44.5 35.97 N921052G-3000

1350 Unwelded CV-8 3.500X.083 66.16 62.91 54.31 N921054-4800

1410 Series1410 Unwelded CV-14 2.500x.120 37.55 36.05 27.10 N924141G-2013

1410/1350 Series1410/1350 Unwelded CV-8 3.500X.083 66.7 63.26 54.31 N921054-4801

9-19

DR

IVE

SH

AFT

& D

.C.


NEW PARTS

DRIVE SHAFT COMPONENTS - STEEL

1 2 3 5 6

DL Series


Flange Yoke

Slip Yoke

Dust Cap

Stub Shaft

CV Head Assembly

Tube Weld Yoke Part Number

1310 Series1310 Unwelded

CV-71-0153/ 1-0154

— N2-3-8021KX

280194 N2-40-1851

N912747 — N909363-2600

1310 Unwelded CV-7

1-0153G — N2-3-8021KX

280194 N2-40-1851

N912747G — N909363G-2600

1310 Unwelded CV-7

1-0153/ 1-0154

— N2-3-8001KX

280194 N2-40-1701

N912777 — N909365-2600

1310/1350 Series1310/ 1350

Unwelded CV-8

1-0153/ 2-0052

— N2-3-8001KX

280194 N2-40-1701

N921049 — S91397-2000


CV-72-4900/ 2-4801

— N2-3-8041KX

280194 N2-40-1851

N910811 — N911818-2600

1330/1350 Series1330/ 1350

Unwelded CV-8

2-4800/ 2-0052

— N2-3-7961KX

280194 N2-40-1712

N921056 — N921056X-2000

1330/ 1350

Unwelded CV-8

2-4800/ 2-0052

— N2-3-8041KX

280194 N2-40-2791-1

N921050 — N921050-2000


CV-142-0053G — — — — N921050G — N921050G-2010

1350 Unwelded CV-8

2-0053/ 2-0052

— N3-3-1502KX

280194 N2-40-2791-1

N921050 — N921050-2007

1350 Unwelded CV-8

2-0053 /2-0052

— N3-3-488KX

ND3A N3-40-1222

N921052 — N921052-3000

1350 Unwelded CV-8

2-0053G — N3-3-488KX

ND3A N3-40-1222

N921052G — N921052G-3000

1350 Unwelded CV-8

2-0053 /2-0052

— N3-3-488KX

ND3A N3-40-1561

N921054 — N921054-4800


CV-142-0054G — — — — N924141G — N924141G-2013

1410/1350 Series1410/ 1350

Unwelded CV-8

2-0054/ 2-0052

— N3-3-508KX

ND3A N3-40-1561

N921054 — N921054-4801

9-20


NEW PARTS

DRIVE SHAFT - ALUMINUM

DRIVE SHAFT - STEEL (Cont’d)

B A A C

DL Series Driveshaft Style Tube Size

Maximum Extended

Length

Com-pressed Length


3R Series3R Unwelded-4 2.750X.065 32.56 29.44 17.25 S91397-2003

3R/1310 Series3R/1310 Unwelded-9 2.000X.120 43.81 — — N131138-3000

3R/1350 Series3R/1350 Unwelded CV-8 2.500X.095 37.94 35.44 25.94 N921050-2003



B A

DL Series


Maximum Length

CL To CL

CL To Point Of

Weld Part Number1330 Series

1330 Unwelded 3.50X.114 70.00 3.90 A133-6200-3.51330 Unwelded 5.00X.125 87.00 3.45 A133-8000-5

1350 Series1350 Unwelded 3.50X.114 70.00 3.90 A135-6200-3.51350 Unwelded 4.00X.087 73.00 3.90 A135-6500-41350 Unwelded 5.00X.125 87.00 3.45 A135-8000-5

1410 Series1410 Unwelded 4.00X.087 73.00 3.90 A141-6500-41410 Unwelded 5.00X.125 87.00 3.45 A141-8000-5

1480 Series1480 Unwelded 5.00X.125 87.00 3.45 A148-8000-5

9-21

DR

IVE

SH

AFT

& D

.C.


NEW PARTS

DRIVE SHAFT COMPONENTS - ALUMINUM

DRIVE SHAFT COMPONENTS - STEEL (Cont’d)

1 2 3 5 6

DL Series


Flange Yoke

Slip Yoke

Dust Cap

Stub Shaft

CV Head Assembly


3R Series3R Unwelded-4 2-3011 N3R-2-

8268N3R-3-9170KX

280194 N2-53-9170-2

— N3R-28-307

S91397-2003

3R/1310 Series3R/ 1310

Unwelded-9 3-3130/ 1-0154

— — — — N913601 N2-28-1757

N131138-3000

3R/1350 Series3R/ 1350

Unwelded CV-8

2-3011/ 2-0052

— N3R-3-9170KX

280194 N2-40-2791-1

N921050 — N921050-2003

7260/1350 Series7260/ 1350

Unwelded CV-8

1-6301/ 2-0052

— N2-3-7260KX

280194 N2-40-1701

N921049 — S91397-2001

7290/1350 Series7290/ 1350

Unwelded CV-8

2-1175/ 2-0052

— N729-3-1631KX

280194 N2-40-1701

N921049 — S91397-2002

1 2 3 5 6

DL Series


Flange Yoke

Slip Yoke

Dust Cap

Stub Shaft

CV Head Assembly


1330 Series1330 Unwelded NA — — — — — A33-28-

3511A133-6200-3.5

1330 Unwelded NA — — — — — A33-28-5012

A133-8000-5


3511A135-6200-3.5

1350 Unwelded NA — — — — — A35-28-4009

A135-6500-4

1350 Unwelded NA — — — — — A35-28-5012

A135-8000-5


4009A141-6500-4

1410 Unwelded NA — — — — — A41-28-5012

A141-8000-5


5012A148-8000-5

9-22

FB-275-SP Replacement Bell Kit FB-300-SP Replacement Bell Kit

68-0275 68-0300

FB-N1000 Shield Kit

FB-300-SP FN-300-4

PT-3.00-60.002294-4

PT-2.75-60.00

FN-275-4 FB-275-SP

68-1000

3.00 2.75

10.22

8.28

4.00 5.00

FN-275-4

3.25 3.00

10.22

8.22

4.005.00

FN-300-4

Consists of: 1) FB-275-SP Bell 1) FB-300-SP Bell 1) PT-2.75-60.00” Inner Shield Tube 1) PT-3.00-60.00” Outer Shield Tube 4) FN-275 Shield Bearing 4) FN-300 shield Bearing 1) 2294-4 Shield Support Bearing 1) FBIS-99.6 Instruction Sheet

Consists of: 1) FB-275-SP Bell 4) FN-275 Shield Bearing

Consists of: 1) FB-300-SP Bell 4) FN-300 Shield Bearing

PTO / AUX SHAFT - SHIELDING SYSTEM

10-1

SM

ALL

PA

RTS

● Driveline Weight● Increasing Bushing● Pilot Reducer● Dust Seal● Welch Plug● Miscellaneous Fasteners● Miscellaneous Hardware● Driveshaft Boot● Centering Tool

10 Small Parts

10-2

SMALL PARTS

NEW PARTS

DRIVELINE WEIGHT

Material

Unit Weight Grams

Unit Weight Ounces

Quantity Per Box

Thick-ness Width Tube Dia.

Part Number

Steel 4g 0.14 300 0.060 0.88 1.25 AND UP

DLW-1

Steel 5g 0.17 250 0.060 0.97 1.25 AND UP

DLW-2

Steel 8g 0.28 200 0.060 1.19 1.25 AND UP

DLW-3

Steel 10g 0.35 150 0.060 1.32 1.25 AND UP

DLW-4

Steel 20g 0.70 250 0.120 1.32 1.25 AND UP

DLW-5

Steel 30g 1.05 150 0.188 1.32 1.25 AND UP

DLW-6

Steel 42g 1.48 50 0.125 1.62 2.0 AND UP

DLW-30

Steel 50g 1.76 50 0.125 1.62 2.0 AND UP

DLW-17

Aluminum 2.6g 0.09 50 0.075 1.25 3.5 AND 4 DLWA-41Aluminum 2.6g 0.09 50 0.075 1.25 5 DLWA-51Aluminum 4.3g 0.15 50 0.075 1.25 3.5 AND 4 DLWA-42Aluminum 4.3g 0.15 50 0.075 1.25 5 DLWA-52Aluminum 5.5g 0.19 50 0.075 1.25 3.5 AND 4 DLWA-43Aluminum 5.5g 0.19 50 0.075 1.25 5 DLWA-53Aluminum 8g 0.28 50 0.075 1.25 3.5 AND 4 DLWA-44Aluminum 8g 0.28 50 0.075 1.25 5 DLWA-54Aluminum 9g 0.31 50 0.250 1.25 3.5 AND 4 DLWA-45Aluminum 9g 0.31 50 0.250 1.25 5 DLWA-55Aluminum 10.6 0.37 50 0.250 1.25 3.5 AND 4 DLWA-46Aluminum 10.6g 0.37 50 0.250 1.25 5 DLWA-56Aluminum 20g 0.71 25 0.250 1.25 3.5 AND 4 DLWA-47Aluminum 20g 0.71 25 0.250 1.25 5 DLWA-57

10-3

SM

ALL

PA

RTS

SMALL PARTS

NEW PARTS

INCREASING BUSHING

A B C DButt

DiameterTube Size

MaxOutside Diameter

Tube Pilot

Inside Diameter Length

Part Number

2.50 X 0.08 3.500X.083 3.5 3.343 2.328 0.875 53692.50 X 0.10 3.000X.065 3 2.875 2.281 0.875 53612.50 X 0.10 3.500X.065 3.5 3.375 2.281 0.875 53623.00 X 0.08 3.500X.083 3.5 3.343 2.838 0.875 53683.00 X 0.13 3.500X.065 3.5 3.375 2.719 0.875 53633.00 X 0.13 4.000X.083 4 3.875 2.719 0.875 53643.50 X 0.08 4.000X.083 4 3.844 3.338 0.875 53733.50 X 0.16 4.000X.083 4 3.875 3.188 0.875 53653.50 X 0.16 4.500X.083 4.5 4.375 3.188 1.000 5366

10-4

SMALL PARTS

NEW PARTS

PILOT REDUCER

DUST SEAL

Round Splined

Outside Diameter

Inside Diameter

Part Number

2.68 2.000 5324

A B C

DL Series TypeInside

DiameterOutside Diameter Height

Part Number

1000/1210 Round 1.000 2 1.310 2801961310 THRU 1410 Round 1.150 2.12 1.310 2801941310 THRU 1410 Round 1.150 2.12 1.310 280194-11310 THRU 1410 Splined 1.375-16 2.12 1.000 280195

7260 Splined 1.250-16 1.78 0.750 280200

10-5

SM

ALL

PA

RTS

SMALL PARTS

NEW PARTS

DUST SEAL

WELCH PLUG

Round Splined

A B C

DL Series TypeInside

DiameterOutside Diameter Height

Part Number

1280/1310 Round 1.090 2 0.750 ND2C1280/1310 Splined 1.250-16 1.67 0.650 ND2K1350/1410 Round 1.190 2.12 0.750 ND3A1350/1410 Splined 1.375-16 1.9 0.750 ND3G

1410 Splined 1.500-16 1.9 0.750 ND3K1410/1480 Round 1.240 2.31 0.750 ND3H

1550 Round 1.410 2.58 0.910 ND4J1550 Splined 1.750-16 2.34 0.750 ND4K1610 Round 1.620 2.64 0.930 N5-86-68

1710/1760 Round 2.060 3.35 0.930 N6.3-86-181810 Round 2.520 3.96 0.950 N6.5-86-38

A B

DL Series HeightOutside Diameter

Part Number

1610 0.440 2.2 N5-68-541710 1.250 2.75 N6-68-71

1710/1760 0.530 2.75 N6-68-511760 1.090 2.75 N6.3-68-141810 0.620 3.25 N8-68-13

10-6

SMALL PARTS

NEW PARTS

U-BOLT KIT

UNIVERSAL JOINT BEARING CAP RETAINER

A B CDL

SeriesBearing

SizeStud

LengthCL To CL Of Studs

Thread Size Used With UJ

Part Number

1310 / 1330

1.063 1.726 1.406 0.31-24 1-0153 / 1-0154 / 1-0200 / 2-4800

1-0089

1350 / 1410

1.188 2.000 1.656 0.38-24 2-0053 / 2-0054 1-0099

1480 / 1550

1.375 2.280 1.906 0.44-20 3-0188 / 3-0155 1-0109

Clev 1330

1.125 1.820 1.578 0.31-24 2-4900 1-0189

A B

DL SeriesCL To

CLHole Dia. Used With UJ Part Number

1610 2.313 0.344 4-0279 / 4-0674 1-28581710 / 1760 / 1810

2.437 0.406 5-0280 / 6-0675 / 6-0677 / 6-0407 / 6-0676 / 6-0281

1-2859

20R / 25R — — 6-0020 / 6-0025 NKIT-RPL25-20

SPL170 / SPL250

— — 6-1170 / 6-1250 1-0070

10-7

SM

ALL

PA

RTS

SMALL PARTS

NEW PARTS

BEARING STRAP KIT

A B C

DLSeries

Bearing Size

CL To CL

Strap Width

Bolt Hole Dia.

Length Under Head (Bolt

Length)Thread

Size Used With UJ Part Number1310 / 1330

1.063 1.592 0.690 0.28 0.59 0.25-28 1-0153 / 1-0154 / 1-0200 / 2-4800

1-0022

1310 / 1330

1.063 1.593 0.620 0.31 1.5 0.31-24 1-0153 / 1-0154 / 1-0200 / 2-4800

1-0024

1350 / 1410

1.188 1.660 0.750 0.34 1.5 0.31-24 2-0053 / 2-0054 1-0020

1350 / 1410

1.188 1.812 0.750 0.34 0.75 0.31-24 2-0053 / 2-0054 1-0019

1480 / 1550

1.375 2.125 0.840 0.40 0.75 0.38-24 3-0188 / 3-0155 1-0021

1485 / 1555

1.375 1.930 0.750 0.35 1.28 0.31-24 3-0486 / 3-1555 1-0030

1610 1.875 2.500 1.000 0.41 0.75 0.38-24 4-0674 1-00451710 / 1760 / 1810

1.937 2.812 1.060 0.53 1.0 0.50-20 6-0675 / 6-0676 / 6-0677

1-0046

3R 1.125 1.812 0.620 0.33 1.5 0.31-24 2-3010 / 2-3011 / 2-3111

1-0025

7260 1.078 1.500 0.560 0.27 0.62 0.25-28 1-6300 / 1-6301 1-00237290 1.125 1.530 0.620 0.28 0.59 0.25-28 2-1175 1-0018

SPL170 2.165 3.228 1.100 0.49 0.984 M12x1.25 6-1170 N170-70-08XSPL170 2.165 3.228 1.100 0.49 0.984 M12x1.25 6-1170 N170-70-18XSPL250 2.361 3.444 1.132 0.49 0.984 M12x1.25 6-1250 N250-70-08XSPL250 2.361 3.444 1.132 0.49 0.984 M12x1.25 6-1250 N250-70-18XSPL90 / SPL100

1.620 2.310 0.39 0.75 0.38-24 4-1090 / 4-1091 N90-70-28X

10-8

SMALL PARTS

NEW PARTS

BOLT

DRIVE SHAFT BOOT

SNAP RING

Thread Grade LengthPart

Number1/4 — 0.562 60295625/16- 24UNF

8 1.250 37050X

3/8-16 — 0.750 50-04493/8-24 — 1.250 N131F3/8-24 — 1.250 N161F7/16-20 — 1.250 N135F1/2-20 — 1.500 N148F3/4-16UNF

5 1.500 N500415-9

D / E F

Inside Diameter

Length In

Inches ApexesUsedWith

Part Number

1.65 / 1.65 3.11 3 N3R-82-1181 / N2-81-1181 N21125041.87 / 2.09 3.74 5 N214734 N21187344.51 / 4.51 7.80 8 N250-55-31X / N250-82-21X /

N170-82-71XN211959X

4.16 / 4.20 10.7 11 N170-55-21-2X N211987X

DL Series

Thick-ness

Color Part Number

0600 0.050 copper 1-10771310 / 1330

0.059 black 3-7700

1310 / 1330

0.061 white 3-7705

1310 / 1330

0.063 blue 3-7706

1350 / 1410

0.056 gray 3-7810

1350 / 1410

0.061 green 3-7807

1350 / 1410

0.063 yellow 3-7808

20R / 25R

0.078 black NRRIR36-4

3R 0.089 black 1-82977260 0.062 copper 1-1771

10-9

SM

ALL

PA

RTS

SMALL PARTS

NEW PARTS

SHAFT NUT

WASHER BALL SEAL

Inside Dia.

Outside Dia. Thickness

Part Number

0.750 1.25 0.190 N500357-170.813 1.75 0.190 N2301291.281 2.75 0.125 N230123-6

DLSeries

Part Number

— N2-86-12981310 thru 1350 N2-86-418

LUBE FITTING

Standard Flush

Tap SizeFlange

Dia.

Width Across Flats

Thick-ness

PartNumber

1-20UNEF — 1.280 0.563 N16-74-1011 1/4-18UNEF 2.500 1.625 0.630 N20-74-911 1/4-18UNEF 2.060 1.625 0.630 N231502

Thread Diameter

Overall Length Type

Part Number

1/4-28NF Tapered

0.44 Flush 2915

1/4-28NF Tapered

0.59 Standard 0641-B

1/4-28UNF

0.47 Standard 1981

1/8 PTF 0.69 Standard 0610-B10-32NF 0.34 Flush 2920

10-10

SMALL PARTS

NEW PARTS

DRIVE SHAFT CENTERING TOOL

DL SeriesUsed With UJ

Part Number

1000 1-0170 10001210 1-0443 12101310 1-0153 13101330 2-4800 13301350 2-0053 13501410 2-0054 14101480 3-0188 14801550 3-0155 15501600/1610 4-0279 1600/16101700/1710 5-0280 1700/17101760 6-0407 17601810 6-0281 181055N 3-0045 55NL12N 1-1275 L12NL14N 1-2075 L14NL16N/35N 2-2275 L16N/35NNPL-170 6-1170 SPL-170NPL-250 6-1250 SPL-250NPL-90 4-1090 SPL-90PL-140 TBD SPL-140RPL-20 TBD RPL-20RPL-25 TBD RPL-25

11-1

CE

NTE

R S

UP

PO

RT

● Dimensional Listing by Bearing ID

Center Support 11

11-2

CENTER SUPPORTDIMENSIONAL REFERENCE

NEW PARTS

A A B C

Bore Inches Bore MM

CL Of Bearing To Face

CL To CL Of

Mounting Bolt Hole Diameter Part Number0.984 25 0.98 6.46 0.47 X 1.18 N214201

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.102 28 0.86 6.63 0.79X1.02 N216809

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 — — — N212801

11-3

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-4


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 — 5.83 M8X1.25 Nuts N213801

A A B C

Bore Inches Bore MM


CL To CL Of


11-5

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 0 6.48 0.43 X 0.55 N227030

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 0 6.48 0.43 X 0.69 N216801

11-6


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-7

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-8


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 1.91 5.79 0.59 X 0.63 N211590-1X

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 3.28 / 2.59 7.35 0.39 X 0.98 N211020-1X

11-9

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 3.50 1.50 M10X1.5 Threads CN210527X

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 3.50 1.50 M10X1.5 Threads N210527X

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.181 30 3.90 3.74 M12X1.75 N212187-1X

11-10


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.260 32 1.89 5.87 0.61 X 0.67 N211431X

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.378 35 — — — N212050X

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.378 35 1.46 5.35 0.41 & 0.41 X 0.47 N217390

11-11

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.378 35 2.15 6.63 M10 X 1.5 Stud N218102

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.378 35 2.20 6.62 M10X1.5 Studs N217020

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.378 35 2.24 6.61 0.51 X 0.56 CN210088-1X

11-12


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-13

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-14


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.378 35 2.24 6.62 0.55 N211139X

11-15

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-16


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 2.15 6.65 M10 X 1.5 Stud N218099

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 2.23 6.62 M10X1.5 Studs N212028-1X

11-17

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-18


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-19

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-20


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 2.25 6.62 0.56 N212093-1X

A A B C

Bore Inches Bore MM


CL To CL Of


11-21

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 2.30 6.63 0.44 N213075

A A B C

Bore Inches Bore MM


CL To CL Of


11-22


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 2.50 6.63 0.56 CN210140-1X

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-23

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-24


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-25

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 2.60 6.62 M10X1.5 Stud N212032-1X

A A B C

Bore Inches Bore MM


CL To CL Of


11-26


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.575 40 3.25 3.39 0.44-14 Nut N211848-1X

A A B C

Bore Inches Bore MM


CL To CL Of


11-27

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.772 45 2.72 7.62 0.56 CN210969X

11-28


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-29

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-30


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-31

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of

Mounting Bolt Hole Diameter Part Number1.968 50 2.80 7.62 0.52 X 0.62 N210121-1XSA

A A B C

Bore Inches Bore MM


CL To CL Of


11-32


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


11-33

CE

NTE

R S

UP

PO

RT


NEW PARTS

A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


A A B C

Bore Inches Bore MM


CL To CL Of


12-1

WIN

G B

EA

RIN

G

Wing Bearing Driveline Products12

● End Yoke● Slip Yoke● Stub Shaft● Tube Weld Yoke● Yoke Shaft

12-2

WING BEARING

NEW PARTS

END YOKE

E F D

DL Series

Spline / Number

TeethLength

Of SplineFace To

EndHub Dia.

Part Number

7C Series7C 1.750-10 2.19 3.44 2.38 10508J

12-3

WIN

G B

EA

RIN

G

WING BEARING

NEW PARTS

SLIP YOKE

G H J

DL Series

Spline / Number

TeethOverall Length

Length To Dust

Cap

Hole/Thread

SizePart

Number5C Series

5C 1.500-10 5.38 5.00 0.38-24 6-50005C 1.560-16 5.62 5.00 0.38-24 5-67747

6C Series6C 1.750-10 5.62 5.31 0.38-24 6-60006C 1.750-16 6.13 5.25 0.38-24 6-61636C 1.750-16 8.88 8.00 0.38-24 6-677816C 1.750-16 9.50 8.00 0.38-24 6-6047

7C Series7C 2.000-10 7.06 6.50 0.50-20 6-70007C 2.000-10 9.13 7.75 0.47 6-70397C 2.000-16 7.06 6.50 0.50-20 6-67820

8C Series8C 2.500-16 8.63 7.50 0.50-20 8-78503

8.5C Series8.5C 2.500-16 8.62 7.50 0.50-20 85-67843

9C Series9C 3.000-16 9.62 8.50 0.50-20 9-67847

12-4

WING BEARING

NEW PARTS

STUB SHAFT


Teeth

Tubing Diameter And Wall Butt Dia.

Length Of Spline


End Of Spline To

WeldPart Num-

ber1.50-10 2.50X.095 2.32 3.00 6.04 6.75 3545J1.56-16 2.50X.095 2.29 3.00 5.56 6.38 5-617291.75-10 3.00X.095 2.82 3.00 6.28 7.00 3670J1.75-10 3.50X.095 3.32 3.00 6.87 7.13 9146J1.75-16 3.00X.095 2.82 3.00 6.28 7.00 6-617251.75-16 3.00X.095 2.82 3.00 8.82 9.75 6-617471.75-16 3.50X.095 3.32 3.00 8.75 9.63 17072J2.00-10 3.50X.095 3.32 4.00 7.63 8.50 9281J2.00-10 3.50X.095 3.32 7.13 8.41 9.38 9276J2.00-16 3.50X.120 3.27 3.74 10.86 11.63 7-708252.00-16 3.50X.120 3.27 3.88 7.44 8.50 7-617262.50-16 4.00X.134 3.73 4.00 8.25 9.25 85-405412.50-16 4.00X.187 3.63 4.50 8.81 10.00 8-617373.00-16 4.50X.250 4.01 5.38 9.65 11.19 9-61716

12-5

WIN

G B

EA

RIN

G

WING BEARING

NEW PARTS

WELD YOKE

D F G

DLSeries

Tubing Dia. And Wall Butt Dia.

Face To Weld Point

Hole/Thread

Size

Part Number

5C Series5C 2.500X.095 2.32 1.12 0.38-24 5-651195C 2.500X.109 2.29 1.12 0.38-24 5-651885C 2.500X.109 2.29 1.12 0.41 5-65138

6C Series6C 3.000X.095 2.82 1.88 0.38-24 6-651826C 3.000X.095 2.82 1.88 0.41 6-651226C 3.500X.095 3.32 1.88 0.38-24 6-65180

7C Series7C 3.500X.095 3.32 2.12 0.50-20 7-651727C 3.500X.120 3.27 2.12 0.50-20 7-65230

8C Series8C 4.000X.187 3.63 2.69 0.50-20 8-65262

8.5C Series8.5C 4.000X.134 3.74 2.63 0.50-20 85-60118.5C 4.000X.187 3.63 2.12 0.50-20 85-74020

9C Series9C 4.500X.250 4.01 2.50 0.50-20 9-65288

12-6

WING BEARING

NEW PARTS

YOKE SHAFT

D E F

DL Series

Spline / Number

TeethOverall Length

Length Of Spline


Part Number

7C Series7C 2.000-10 7.00 2.94 5.25 5505J

13-1

GE

NE

RA

L IN

FOR

MA

TIO

N

General Information13

● Universal Joints● Driveline Components● Driveline Fabrication● Aluminum Components● PTO Components● Troubleshooting● Glossary

13-2

GENERAL INFORMATION

Neapco Driveline ComponentPart Numbering System

EXAMPLE: N6-3-2651KX

Neapco Series ID _ Description _ Part Number _ Additional Items Ex: N6 _ 3 _ 2651 _ KX 1710 Series _ Slip Yoke _ Part No. _ Dust Cap

SERIES ID NO. SERIES N10 1000

1310

N2 1330

1350

N3 1410

1480

N3R 3R or S44

N4 1550

N5 1610

N6 1710

N6.3 1760

N6.5 1810

N729 7290 N170 SPL170*N250 SPL250*

* SPL - Spicer ® Life Series driveshafts is a registered trademark of Dana Limited.

13-3

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Typical Methods Of Universal Joint Lock-up

INSIDE OUTSIDE

PLASTIC INJECTION BEARING STRAPU-BOLT

RETAINER PLATE

DRILLED BLOCK BEARING

WING BEARING: 1 DRILLED, 1 THREADED

THREADED DELTA WING BEARING

PLATE LOCK

13-4

GENERAL INFORMATIONNeapco Driveline Components

SECTION NUMBER (ID NUMBER) AND DESCRIPTION

(2) Flange Yoke

(3) Slip Yoke (4) End Yoke

(26) H-Yoke (27) Yoke and Tube Assembly

(26) or (28) Tube Yoke

(1) Companion Flange

Section 5 Section 6

Section 2

(83) Flange Socket Yoke

Section 3

(23) Flange Sleeve

(28) Ball Stud Yoke

Section 1

Section 4

(30) Tubing

(55) Sleeve

13-5

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

(40 &42)Stub Shaft

Section 8Section 7

Section 10 Small Parts

● Driveline Weights● Increasing Bushings● Pilot Reducer● Dust Seal● Welch Plug● Miscellaneous Fasteners● Miscellaneous Hardware● Driveshaft Boots● Centering Tools

(81) Flange Stub (82) Yoke Shaft

(53 & 54) Midship Stub Shaft

Neapco Driveline ComponentsSECTION NUMBER (ID NUMBER) AND DESCRIPTION

Section 11 Center Support Bearings

(N2xxxxx)

Section 9 Driveshaft Assemblies

● Double Cardan C.V. Repair Kit● Double Cardan C.V. Head Assembly● Double Cardan C.V. Head Components● PTO / AUX Shaft● Driveshaft ● Driveshaft Components● Double Cardan Centering Repair Kits● PTO / AUX Shaft Shielding System

13-6

GENERAL INFORMATION

SHORT COUPLED ASSEMBLY

Typical Driveline Assemblies

TWO JOINT ASSEMBLY

Short coupled assemblies are generally used in applications where space is limited and would not allow tubing to be utilized. A typical application ,-would be between the axles of a tandem vehicle.

Two joint assemblies are used in applications that require the shaft assembly to lengthen and shorten due to movement by either or both of the connecting ends. A short wheel base vehicle is a typical application.

DOUBLE CARDAN CV ASSEMBLY

Double Cardan CV shaft assemblies are used in applications that require operating angles beyond the capability of standard single u-joints. The most common application is the front shaft of a 4 x 4 vehicle.

13-7

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Typical Driveline Assemblies

CENTER BEARING STYLE

TYPICAL DRIVELINE ARRANGEMENT

Transmission

Driveshaft

1st Differential

Driveshaft

2nd Differential

Shaft assemblies that use center bearings are typically used to span lengths beyond the capability of a single shaft. A minimum of one shaft assembly will have the ability to provide slip movement. An example is the main driveshaft of most medium duty straight chassis.

13-8

GENERAL INFORMATION

Basic Driveline Design Procedures & PrecautionsIn order to get the optimum service life out of any driveline and its components, it is important to start out with a driveline which is right for the application, and an application which allows the use of drivelines in their acceptable working ranges. There are five key elements that must be considered when building a driveline.

1 -OPERATING SPEEDS -TABLES I & II2 -OPERATING LOADS OR TORQUES -TABLE II3 -OPERATING U-JOINT ANGLES -TABLE Ill 4 -LENGTH OF DRIVELINE -TABLE 15 -DRIVELINE BALANCE

Each of these elements, separately or in conjunction with each other, can lead to driveline problems and/or failure when not matched with the driveline capabilities.

The maximum operating speed must be held somewhat below the critical speed of the driveline, — 85% for passenger cars and light duty trucks and 75% for medium and heavy-duty trucks. The critical speed is a function of the tubing O.D., the tubing wall thickness, and the centerline to centerline length of the driveshaft. Operating at or near the critical speed of a driveline will cause substantial vibration and possible failure. The maximum load that a driveline can carry is a function of joint rating, tubing O.D. and wall thickness, and component strength. It is generally accepted that the major limiting factor in determining allowable U-joint operating angles is speed. Good design practice is to keep operating angles within the 0.5° to 3° range. Higher angles are permissible, depending on shaft speed. Another good design practice is to keep the difference in angles between two U-joints in the same driveshaft to within 1°.

Universal joint operating angles can be determined by measuring the angles of the various components and finding the resultant. A bubble or digital protractor is needed to measure the component angles. Measurements should be taken on machined surfaces, and partial disassembly of the driveline may be required to expose those surfaces. Common surfaces which are used to take angle measurements are: the outside face of yoke ears, flange faces and the outside diameter of the tubing.

13-9

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Before Starting

When measuring drivelines to determine U-joint angles, it is good practice to start out with a sketch showing the basic driveline and where measurements are to be taken. Before measuring any angles, the vehicle must be parked on level ground with all tires inflated to their normal operating air pressures. Block the front tires to prohibit movement and place the transmission in neutral (Make sure that the parking brake is released). It may be necessary to jack up a rear wheel so that the driveline can be rotated to get the.transmission output yoke ear parallel to the ground.

*Measure all angles on flat surfaces, which are clean and free from rust, scale or nicks.

The following is a typical procedure for determining U-joint operating angles:

1. Measure transmission output shaft angle and determine its direction (up or down), record.

2. Measure angle of driveshaft and determine its direction, record.

3. Measure angle of axle input yoke and determine its direction, record.

4. The difference between the transmission output shaft angle and the driveshaft angle is the transmission output U-joint operating angle.

5. The difference between the driveshaft angle and the axle input angle is the axle input U-joint operating angle.

6. Check difference of U-joint operating angle to make sure they are within 1° of each other.

Follow same pattern to determine U-joint angles in other driveshafts.

Below is a typical driveline arrangement and a sample U-joint angle calculation:

1. Transmission output angle = 3° (down) 2. Driveshaft angle = 4.5° (down) 3. Axle input shaft angle = 2.8° (down) 4. Difference between 3°(down) and 4.5°(down) = 1.5°This is the transmission output U-joint operating angle.

(#1-#2) 5. Difference between 4.5°(down) and 2.8°(down) = 1.7°This is the axle input U-joint operating angle. (#2 -#3) 6. Difference between 1.5° and 1.7° = .2° This is less than the recommended 1° maximum. (#4-#5)

1 2 3

13-10

GENERAL INFORMATIONTable I - Driveline Centerline To Centerline

MAXIMUM LENGTH AT MAXIMUM RATED RPM BY SERIES Series Tube Size Part No. Max. RPM Max. Length

1000 2” x .083 N16-30-62 2500 54 1310 2”x 065 N16-30-32 6000 35 2”x .083 N16-30-62 6000 35 2”x 120 N16-30-102 6000 34 2.5”x .065 N20-30-12 6000 39 2.5”x .083 N20-30-22 6000 39 2.16”x .065 N22-30-12 6000 41 3”x .065 N24-30-82 6000 43 3”x .083 N24-30-42 6000 43 3.5”x .065 N28-30-42 6000 46 3.5”x .083 N28-30-62 6000 46 1330 2.5”x .083 N20-30-22 5000 43 3”x .065 N24-30-32 5000 47 3”x .083 N24-30-42 5000 47 3.5”x .083 N28-30-62 5000 51 1350 2.5’x .083 N20-30-22 5000 43 2.75x.083 N22-30-22 5000 45 3”x .083 N24-30-42 5000 47 3.5”x .083 N28-30-62 5000 51 2.5”x.120 N20-30-62 5000 39 1410 3”x .083 N24-30-42 5000 47 35”x .065 N28-30-42 5000 51 3.5”x .083 N28-30-62 5000 51

1480 3.5”x .083 N28-30-62 5000 51

3.5”x .095 N2&30-22 5000 50

4”x .083 N32-30-22 5000 54

1550 3.5”x .095 N28-30-22 5000 50

4”x .083 N32-30-22 5000 54

1610 3.5”x .134 N28-30-92 4500 53

1710 3.5”x .156 N28-30-52 4500 53

4”x .134 N32-30-52 4500 57

4.095”x .180 N32-30-72 4500 57

1760 4”x .134 N32-30-52 4500 57

4.095”x .180 N32-30-72 4500 57

1810 4.5”x .134 N36-30~62 4500 60

SPL170* 4.73”x.197 N110-30-5 4000 60

4.96”x.118 N120-30-3 4000 60

SPL250* 5.06”x.167 N120-30-4 4000 60

5.12”x.197 N120-30-5 4000 60

5.20”x.236 N120-30-6 4000 60* SPL - Spicer ® Life Series driveshafts is a registered trademark of Dana Limited.

Maximum centerline to centerline using a .75 safe speed factor generally accepted for medium and heavyduty trucks.

13-11

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Table II- Universal Joint Torque Ratings

Table III - Operating Angles

ELECTRIC FUEL MAXIMUM SERIES PART NUMBER MOTOR APPLICATION RPM (LBS-FT) (LBS-FT)

1000 1-0170 75 50 2500 1210 1-0315 95 65 6000 1280 1-0350 140 95 6000 1310 1-0153 195 130 6000 1330 2-4800 220 150 5000 1350 2-0053 310 210 5000 , 1410 2-0054 375 250 5000 1480 3-0188 500 335 5000 1550 3-0155 640 420 5000 1610 4-0279 975 640 4500 1710 5-0280 1330 895 4500 1760 6-0407 1630 1095 4500 1810 6-0281 1850 1245 4500 3C 3-3152 295 200 5000 4C 3-4138 375 250 5000 5C 4-5122 640 425 5000 6C 4-6143 875 575 5000 7C 5-7205 1150 775 4500 8C 6-8205 1750 1175 4500 9C 6-9016 2700 1800 3000 10C 6-1007 3800 2550 2500 7260 1-6301 195 130 5000 7290 2-1175 260 175 5000 , 3R 2-3011 260 175 5000 SPL170* 6-1170 1650 1125 4000 SPL250* 6-1250 1940 1306 4000

* SPL - Spicer ® Life Series driveshafts is a registered trademark of Dana Limited.

Shaft RPM Max Operating Angle Shaft RPM Max Operating Angle

1000 17° 3000 6°0’

1500 11°30’ 3500 5°10’

2000 8°50’ 4000 4°20’

2500 7°0’ 4500 4°0’

5000 3°20’

MAXIMUM OPERATING TOROUE CAPABILITY

13-12

GENERAL INFORMATION

Basic Driveline Fabrication TYPICAL TWO JOINT ASSEMBLY

(1310 Series)

1. Stay within the boundaries of the five key elements in the basic driveline design procedures and precautions section.

2. Select appropriate components for the application. NOTE: We will use a typical hollow spindle

lathe for assembly. 3. Cut the tubing to approximately 3/8 inch longer than the required length in a cutoff saw. Remove

all burrs and weld flash from the inside of the tube. 4. Chuck the tubing in the lathe with approximately 2 inches protruding. Face the tubing to square

it up, then chamfer I.D. and O.D.

5. Remove the tubing from the lathe and measure from the machined end to the required length. Scribe or mark the required length on the tube at two places (90 degree intervals).

6. Recheck the tubing with the marked end protruding from the chuck jaws approximately 2 inches. Rotate the tubing and mark the full diameter of the tube at the required length with a marker or grease pencil.

7. Face the tubing to the required length, then chamfer I.D. and O.D.

8. Remove the tubing from the lathe then tamp or press the slip stub into either end of the tubing. (NOTE: if tamping method is preferred, a lead plate should be the surface tamped against.)

9. Place back into lathe with approximately 3 3/4 inches of tubing protruding from the jaws and

slip stub pointing toward the bed of the lathe.

10. Move tail stock into position with center located into the center hole in the slip stub.

13-13

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

15. Weld single pass starting at the high point determined by the dial indicator. 16. Allow driveshaft to cool then recheck runout. NOTE: Do not use any oil, water or an air jet to cool the driveshaft. 17. Remove shaft from lathe and partially tap new tube yoke into tube. (a) The components must be properly phased at this time. (NOTE: Alignment arrows

unique to Neapco slip yokes will ease the phasing procedure.) (b) Some driveshafts are manufactured with special phasing. In this case, the

equipment manufacturer’s service manual or specifications must be consulted to obtain phasing angles and tolerances.

11. Clean the tubing approximately 3 inches from the slip stub around the full diameter of the tube. A 3/4 to 1 inch wide band will be sufficient. Emery cloth can be used.

12. Check the runout on the ground diameter of the slip stub and 3 inches in on the tubing (cleaned area) with a dial indicator.

Maximum runout 3 inches on tubing = .020 TIR Maximum runout slip stub = .005 TIR Correct, if necessary, to stay within the runout tolerance. 13. Tack weld in place at 90 degree intervals. NOTE: Insure that the bed of the lathe is protected from welded spatter whenever welding with

component in the lathe. 14. Recheck runout and correct, if necessary. (Refer to step 12)

13-14

GENERAL INFORMATION

MACHINEDSURFACE OF LUGS

END VIEWOF YOKE EARS

PHASE ANGLEMAX ± 2 º

PHASING

18. Clamp shaft in a pipe vise with slip yoke temporarily assembled on the slip stub with the ear lugs of the slip yoke and tube yoke pointing upwards. Pipe vise should be on the tube yoke end of the shaft.

19. Support the opposite end of the shaft with an open steady rest near the slip stub on the tubing.

20. Place a straight edge on the machined surface of the lug on the slip yoke and align by eye with a second straight edge on the lug of the tube yoke. Correct if necessary.

21. Use a protractor level for final phasing. The cross holes of the 1310 Series drive line must be in

line within plus or minus 2º maximum.

22. With tube yoke tapped into proper phasing, remove slip yoke and shaft from vise. Press or tamp tube yoke into position.

NOTE: Use a lead pad if tamping method is used.

13-15

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

30. Adapt assembly to centers in the lathe and clean 3/4 to one inch wide bands using emery cloth at 14 inches from each weld on the tube and in the center of the tube. Check the runout at the following areas with a dial indicator:

-MAXIMUM RUNOUT THREE INCHES FROM EACH WELD = .020 TIR -MAXIMUM RUNOUT 14 INCHES FROM EACH WELD = .010 TIR -MAXIMUM RUNOUT ON GROUND DIAMETER OF SLIP STUB = .005 TIR -MAXIMUM RUNOUT AT CENTER OF TUBE (OVER 30”) = .010 TIR -MAXIMUM RUNOUT AT CENTER OF TUBE (UNDER 30”) = .020 TIR

NOTE: Do not include tubing ovality. Refer to driveshaft straightness tolerances section for other series

23. Place the shaft back into the lathe with the proper fixturing (adapters), tube yoke towards the tail stock.

24. Clean the tubing approximately three inches from the tube yoke around the full diameter of the

tube. A 3/4 to 1 inch wide band will be sufficient. Emery cloth can be used.

25. Check the runout three inches in on the tubing from the tube yoke end with a dial indicator. Maximum runout three inches on tubing = .020 TIR

26. Tack weld tube yoke in place at 90 degree intervals. NOTE: Insure the bed of the lathe is protected from weld spatter.

27. Recheck runout and correct, if necessary. (Refer to step 25)

28. Weld single pass starting at the high point determined by the dial indicator.

29. Allow driveshaft to cool then recheck runout. NOTE: Do not use any external cooling methods, i.e. water, oil or air jets.

STUB 3”

14” 14”

3”C L

13-16

GENERAL INFORMATION

MACHINEDSURFACE OF LUGS

END VIEWOF YOKE EARS

PHASE ANGLEMAX ± 2 º

PHASING

31. Assemble U-Joints and slip yoke into the newly fabricated driveshaft making sure that alignment arrows match up. Balance to specification. Balancing will vary depending on the type of balancer being used. Refer to the manufacturer’s procedure for the type of equipment being utilized.

32. Paint the completed driveline and place a decal or sticker on it with your shop logo.

This procedure describes a typical 1310 two-joint assembly fabrication. Methods may vary due to type of equipment utilized. The method may also be followed when repairing a driveline: Simply follow the appropriate steps pertaining to the components in need of replacement. —To fabricate other than 1310 Series refer to the appropriate series data where noted in each procedure.

ALWAYS REPLACE DAMAGED COMPONENTS ADHERE TO ALL SHOP SAFETY PROCEDURES ALWAYS STAY WITHIN SPECIFIED TOLERANCES ALWAYS BALANCE YOUR DRIVELINE

Phasing Specifications

The cross holes of all two joint driveshafts must be in line within ± 2º Maximum.

13-17

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Driveshaft Straightness Tolerances

1000 THRU 1480 — ALSO 7260, 7290, 3R, AND 3C After welding, runout (not to include tubing ovality) should never exceed the TIR (total indicator reading) as detailed below.

FOR TUBE LENGTH OVER 30”

MAXIMUM RUNOUT 3 INCHES FROM EACH WELD = .020 TIR MAXIMUM RUNOUT 14 INCHES FROM EACH WELD = .010 TIRMAXIMUM RUNOUT ON GROUND DIAMETER OF SLlP STUB = .005 TIRMAXIMUM RUNOUT ON BEARING DIAMETER IF CENTER BEARING STUB IS USED = .003 TIR MAXIMUM RUNOUT AT CENTER OF TUBE = .010 TIR

FOR TUBE LENGTH UNDER 30”

MAXIMUM RUNOUT 3 INCHES FROM EACH WELD = .020 TIR MAXIMUM RUNOUT AT CENTER OF TUBE = .020 TIR MAXIMUM RUNOUT ON GROUND DIAMETER OF SLlP STUB = .005 TIR MAXIMUM RUNOUT ON BEARING DIAMETER IF CENTER BEARING STUB IS USED = .003 TIR

C L

NOTE: If center bearing stub is used hold .003 on bearing diameter

.0053” 3”

.020.020 .020

.0053”

14” 14”

3”

.020

.010

.010

.010


.020

C L

13-18

GENERAL INFORMATION

C L


.0053” 3”

.020.020 .015

Driveshaft Straightness Tolerances

1550 THRU 1810 — ALSO 4C THRU 10C

After welding, runout (not to include tubing ovality) should never exceed the total indicator reading as detailed below.

FOR ALL TUBE LENGTHS

MAXIMUM RUNOUT 3 INCHES FROM EACH WELD = .010 TIRMAXIMUM RUNOUT ON GROUND DIAMETER OF SLIP STUB = .005 TIRMAXIMUM RUNOUT ON BEARING DIAMETER IF CENTER BEARING STUB IS USED = .003 TIRMAXIMUM RUNOUT AT CENTER OF TUBE = .015 TIR

13-19

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Lubrication WHY LUBRICATE?

Proper lubrication of any moving parts in a driveline is essential to keep the driveline in proper working order and to obtain an acceptable service life.

WHAT SHALL I LUBRICATE?

All universal joints, slip yoke and stub shaft assemblies, as well as centering kits in CV heads should be greased regularly.

HOW? Universal Joints

Secure grease gun on grease fitting and pump in grease until all four bearings are lubricated. To check for this, make sure that all four seals have purged out air and old grease. Grease until fresh grease appears at the base of all four seals. If a seal does not purge properly, move the driveline to free up the end to end clearance of the bearing cup. On bearing plate style U-joints, it may be necessary to loosen the bolts two or three turns to allow grease to flow. If the joint still does not grease properly, disassemble the kit to determine the source of the problem.

Slip Yoke and Stub Shaft Assemblies

Before putting the slip yoke onto the stub shaft, coat both parts uniformly with a layer of grease. After assembly, but before installation into vehicle, fully collapse the driveline and apply grease to the grease fitting until it comes out of the vent hole in the welch plug. Cover the hole and continue greasing until grease appears at the seal.

At relubrication it may be impossible to fully collapse the driveline. Follow the same general greasing procedure but be careful not to overfill. Overfilling may cause the welch plug to pop out during operation.

Centering Kits

A special needle nose grease gun adaptor is needed to grease the flush type fitting on centering kits. Apply grease until fresh grease appears at purge hole or at ball seal.

WHEN SHALL I LUBRICATE?

Frequency of lubrication is determined by the type of service which the driveline is subject to. A list of recommended relube cycles for various service conditions is shown below:

Service Conditions Re-lube Period Approximate Miles City Every 3 Months 6,500 Highway Every 3 Months 15,000 Off Highway Every 1 Months 6,500 Line Haul Every 3 Months 20,000-30,000 Off Highway 4x4 Every 1 Month 2,500 (Relube on period or miles, which ever comes first)

WHAT TYPE OF GREASE SHOULD I USE?

A good quality Lithium Complex soap type EP (extreme pressure) grease, with an NLGl grade2, is recommended.

13-20

GENERAL INFORMATIONGeneral Procedures For Assembling

Aluminum DriveshaftsTools Required:

Push-Up Press or Enerpac Hydraulic Press Centering Tools (Available from Neapco) “Weld Aid” Cleaning Agent

Assembly procedures for aluminum driveshafts are similar to the procedures Driveline Specialists are familiar with. The most significant difference is the set-up of the welding equipment to allow successful welding of aluminum. Neapco recommends that the Driveline Specialist contact the manufacturer of their welding equipment for set-up specifications and training for welding aluminum.

Preparing the Components:

The tubing and tube weld yokes should be clean and free of burrs. Aluminum is fragile compared to steel, so be careful when handling these components during and after assembly.

1. Chamfer the I.D. of the aluminum tubing to remove any burrs or sharp edges.2. Clean the inside and outside of the aluminum propeller shaft tubing – a minimum of 2” in from each

end using “Weld Aid” cleaning agent or similar cleaning product available from your local welding supply source. Repeat this cleaning procedure for the entire surface of both turned diameters on the aluminum tube weld yoke.

3. Wash both ends of the tubing and tube weld yoke in clean water. Wipe the I.D. and O.D. end of the tubing and the entire tube yoke with a clean, dry towel or cloth until completely dry. Note: Success-ful welding of aluminum is directly related to cleanliness. Towels or cleaning clothes should be used for aluminum work only and changed frequently. Rinsing water should be placed in a clean contain-er and changed when any signs of contamination are evident. Oil, grease or any foreign material will cause a potential blow hole in the weld.

4. Using a push-up machine or Enerpac and fixtures specifically designed for driveshaft fabrication, as-semble the aluminum tube weld yokes into the tubing. Correct phasing (alignment of the yoke ears) is critical to the satisfactory performance of the driveshaft. Adjust phasing so that the yoke ears are in line with each other. (This can be checked with a precision level.) Adjust, if necessary, before proceeding to press.

5. A .090” gap (approximately twice the thickness of the weld wire) should be left between the turned shoulder of the tube weld yoke and the end of the tubing. Spacers should be made for both ends and inserted into the gap between the two components to avoid over pressing. Press until shim stock is snug at both ends, but avoid over pressing. After removing shim stock there should be a minimum of .090” gap.

6. The assembled driveshaft is now ready to be set up for welding. The rotation rate should be set for the tube size you are welding.

Approximate Tube Rotation RateTube Dia. RPM Seconds Per Rev.

3.0” 3.18 193.5” 2.73 224.0” 2.39 255.0” 1.60 32

13-21

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

The rotation rate is a guideline. Neapco recommends that you contact the supplier of your welding equipment or your local welding supply service for set up of your specific equipment.

A dial indicator should be used to check the runout at each end of the tubing. Using a dead blow hammer tap over the joint between the tube weld yoke and the tubing until the runout is close to 0.000” as possible, but not to exceed .005”. This will help to keep the finish welded assembly within .010” TIR at the welds. The middle of the tube should have no more than .015” runout.

Tube Straightening Hint – An arbor press with a 2 ft. piece of wood mounted on the ram with a “V” cut in it to fit over the O.D. of the tube can be used to over press the tubing in the opposite direc-tion of the measured runout. This extra step will not only ease the balancing operation; it is sound driveshaft fabrication practice.

7. The weld gun tip should be aligned with the center of the gap between the tube weld yoke and the tubing. The wire should be perpendicular to the tube/tube yoke surface and at a 12o-15o angle from the centerline of the tubing. The weld should start and end (with ½” overlap) in line with one of the yoke ears. The driveshaft is now ready to weld. Neapco recommends formal training in aluminum welding from your equipment supplier. There is no substitute for practice and hands-on experience.After the shaft has cooled, the welds should be visually inspected. Any visible porosity is a sign that some contamination was present. Visible porosity in an aluminum weld is a sign of a potential failure point. Any sign of an inferior weld other than an occasional small pin hole should be cause for replacement of the product.

Balancing the Aluminum Driveshaft

1. Assemble end connections to the driveshaft (slip yoke and pinion yoke, if available). Balance the assembly to .250 oz./in. maximum at each end of the shaft.

2. Position the appropriate balance weight on the barrel / shoulder area of the yoke or yokes. Balance weights may be taped in place, using fiber reinforced duct tape, full length around the yoke barrel / shoulder area.

The driveshaft should be rechecked for proper specifications (within .250 oz./in. total at each end).3. After verifying correct balance performance, the balance weights should be attached. While alumi-

num balance weights may be attached by spot welding, or epoxy. If using epoxy, Neapco recom-mends using a two-part chemical Epoxy bond for attaching balance weights. The exact position of the weights should be marked for reinstallation while removing the duct tape. Using Epoxy Quik-Bond from J-B Weld or similar product, coat each surface with a thin layer of the epoxy. The bal-ance weight should carefully be pressed into position. The weight must not be disturbed after instal-lation. The shaft should be set aside until initial curing occurs. The weight should then be taped in place untill the epoxey has ample time to dry before the driveshaft is installed in the vehicle. Note: There are many fast dry epoxies on the market today. Choose the proper product for your needs.

General Procedures For Assembling Aluminum Driveshafts

13-22

GENERAL INFORMATION

POWER-TAKE-OFF (PTO) BASICS

An auxiliary power-take-off shaft transmits power from the source to the driven accessory. The shaft must be capable of transmitting the peak torque and maximum R.P.M. required by the accessory, while withstanding any shock loads. The information in this publication is focused on 1000 and 1310 series auxiliary power-take-off prod-ucts.

An auxiliary power shaft operates through constantly changing angles between the power source and the driven accessory. Chassis twisting and power train deflections due to torque contribute to these changes in operating angles. This deflection also will cause changes in the length of the auxiliary power shaft. Including a slip member (slip yoke and spline stub shaft) in the driveline system accommodates this.

Joint operating angles are very important considerations in the configuration of an auxiliary power-take-off applica-tion. The service life of the universal joint is directly affected by the operating angles experienced in the completed system. Guidelines for permissible operating angles are identified in the accompanying chart.

SPECIFYING SHAFT TYPE

Applications in auxiliary PTO use either solid shafting or tubular driveshaft assemblies.

Neapco tubular auxiliary PTO shaft kits are manufactured using 2” diameter by .083” wall (2” x .083) tubing. These unwelded assemblies are convenient for fabricating different length driveshaft require-ments as needed. Neapco recommends using tubular auxiliary PTO shafts whenever possible. Neapco tubular shafts are designed to reduce vibration as a dynamically balanced assembly. Minimizing vibration increases the service life of the driveshaft, universal joints, bearings in the driving and driven units and helps keep end connec-tions secure.

Solid shafting should only be used in auxiliary power-take-off applications designed for 1,000 R.P.M. or less inter-mittent service.

INSTALLING A PTO DRIVELINE

When installing a remote-mount PTO, one requiring a propeller shaft (driveline), please observe that there is a slight angle of inclination to the engine, and that you must install the driven shaft of the pump parallel to the PTO output shaft. In addition, the yokes of the PTO driveshaft should be in line, in phase, and in the same plane.

UNIVERSAL JOINT OPERATING ANGLES

SHAFT RPM MAXIMUM NORMAL SHAFT RPM MAXIMUM NORMAL OPERATING ANGLE OPERATING ANGLE

500 17° 2500 7° 1000 17° 3000 6° 1500 11° 3500 5° 2000 8°

Auxiliary Power Take-Off Technical Information

13-23

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Some light-duty under body hoist applications use a pump and tank combination, and there are many large tank trucks which have pneumatic blowers. Both require a level horizontal installation, making parallel input and output shafts difficult to configure. The correct remedy for this common driveline problem is to use a two-piece driveshaft. In close-coupled applications a center yoke assembly may be necessary to provide correct phasing and angularity.

To properly measure the driveline angle, use a bubble or digital protractor to determine TRUE JOINT ANGLE, which is a composite of vertical and horizontal components. This can also be calculated by measuring and using trigonometry. We recommend that you install with at least a two-degree angle, to insure that oscillations will prop-erly rotate the needle bearings in the u-joints.

If a long driveshaft is necessary then critical speed problems must be taken into consideration. The solution is to use more than one driveshaft, installed with center support bearing assemblies, and design the driveshaft lengths to avoid critical and half-critical speeds. Usually the best solution is to install 60% of the driveline closest to the source of power, or the driving end, with the remaining 40% toward the driven end. Pillow blocks, flange bearings or hanger bearings used in two-piece driveshafts must be mounted solidly to the chassis.

WHERE TO INSTALL THE SLIP JOINTS

The purpose of the slip joint (slip yoke and spline stub shaft) is to allow proper flexing of the universal joints as they rotate through the entire circle of operation. If a slip joint is not installed, or if it is corroded from lack of lubri-cant, then severe stresses are imposed upon the bearings and seals in the PTO and pump. An additional purpose of the slip joint is to allow flexing of the chassis without putting lateral loads on the bearings and seals. Bearing and seal damage in PTOs and pumps, and overheating is nearly always attributable to driveline problems.

Our recommendation is that if you have enough space, the slip joint should be installed on the end closest to the PTO. If the PTO is inadvertently left in gear, the slip joint may leave the shaft during overspeeding, or operat-ing above critical speed.

CAUSES OF DRIVELINE FAILURESTo review u-joint and driveline problems, most failures will be a result of one or more of the following:

EXCEEDING TORQUE OR LOAD RATINGLACK OF LUBRICANT OR DIRTY LUBRICANTHIGH DEGREE OF ANGULARITYU-JOINTS NOT IN PHASEU JOINT ANGLE NOT EQUALDRIVELINE NOT ALLOWED TO SLIPDRIVELINE OUT OF BALANCE

If you must use a driveline, it is our recommendation that you use tubular assemblies, and that you purchase from a certified driveline specialist.

Auxiliary Power Take-Off Technical Information

13-24

GENERAL INFORMATION

Neapco®, has developed an Auxiliary PTO Driveshaft shield System that is compatible with many 1000 and 1310 Series power-take-off applications. The system consists of four (4) basic components that combine to form a total driveline enclosure system.

N10270-SF and N10271-SF are equipped with grooves for shield bearings. For all other part numbers choose the appropriate mounting collars.

1) A series of Bearing Races (collars) for installation on the driveshaft assembly by tack welding.

2) Flex Bell™ Yoke Enclosures with over 8” of coverage featuring fluted construction for easy length adjustment by cutting, providing custom installations.

3) Inner (2.75” O.D.) and Outer (3.00” O.D.) Telescoping Plastic Shield Tubes complete with bearing slots (4) and Danger Label. Designed for easy length adjustment by cutting to desired length with bearing slots aligned with bearing races (collars) mounted on the driveshaft. These shields must overlap (telescope) at least 5” or more, if design allows. To accomplish this the shield tube should be cut at least 2 1/2” past the center of the driveshaft with the bearing slots aligned with the bearing race (collars) on the driveshaft.

4) Inner (4) and Outer (4) Shield Bearing Sets. These bearing sets lock the Flex Bell™ Yoke Enclosure to the mating shield tube through the aligned slots and ride in the bearing races on the driveshaft collars.

Assembly is easily accomplished after a short orientation to the system. Disassembly (for service work or lubrica-tion) takes only a few minutes with a blade screwdriver.

Shield Bearings must be installed properly in regards to the rotation of the driveline. This prevents the Shield Bear-ings from loosening or popping out of the Bearing slots.

Neapco Auxiliary PTO Driveshaft Shielding System

DIRECTION OF ROTATION

13-25

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Troubleshooting Guide

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

1. Fractured cross or trun nion or bearing cup.

A. Excessive running load.B. Shock load.C. Insufficient joint capacity.D. Excessive running angle.

A, B & C, Replace with higher capacity driveshaft and U-joint.D. Reduce U-joint angle.

2. Early life U-joint failure A. Inadequate lubrication.B. Seal failure.C. Excessive running angle and excessive speed.D. Excessive running load.

A Lubricate at minimum recom-mended intervals with recom-mended lubricant.B. Replace U-joint.C. Reduce running angle.D. Replace with higher capacity driveshaft and U-joint.

3. Galling of U-joint trunnion end and bearing cup pad.

A. Excessive running angle and excessive speed.B. End to end fit too tight.C. Inadequate lubrication.

A. Reduce U-joint angle.B. Replace U-joint. If replace ment kit is tight, check yoke alignment and lockup size:replace yoke.C. Lubricate at minimum recom-mended intervals with recom-mended lubricant.

4. Brinnelling of bearing surfaces.

A. Normal fatigue wear.B. Excessive running angle and excessive speed.C. Excessive running load.D. Needle skewing.E. Improper running angle.F. Inadequate lubrication.

A. Replace U-joint.B. Replace U-joint angle.C. Replace with higher capacity driveshaft and U-joint.D. Replace U-joint; check for yoke distortion.E. Maintain minimum recommended running angle (typi cally 1°).F. Lubricate at minimum recom-mended intervals with recom-mended lubricant.

5. Slip assembly seizes up. A. Inadequate lubrication.B. Seal failure.

A, B. Replace components. Lubricate at minimum recom-mended intervals with recom-mended lubricant.

6. Slip assembly galling. A. Seal failure leading to contamination.B. Excessive running load.C. Inadequate driveline design; length of spline engagement too short, normal running condition with spline at pul ley extended position.

A. Replace assembly.B. Replace with higher capacity driveshaft and U-joint.C. Increase length of spline en-gagement with longer splined stub. Review driveshaft length requirements and rebuild with stub spline centered in yoke at normal running condition.

13-26

GENERAL INFORMATION

Troubleshooting Guide

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

7. Stub shaft or tubing failure intorsion.

A. Excessive running load.B. Shock load.C. Inadequate driveline design: tube size too small.

A, B, C. Replace with higher capacity driveshaft.

8. Failure at tube weld. A. Improper weld.B. Excessive running load.C. Balance weight welded too close to tube weld.

A, C. Replace tube.B. Replace with higher capacity driveshaft.

9. Yoke ear failure. A. Ear, contacted yoke ear of other yoke in assembly while running.

A. Reduce running angles; use yoke with higher angle rating.

10. Yoke hub failure. A. Excessive running load.B. Excessive secondary couple loads.

A. Replace with higher capacity driveshaft.B. Reduce running angles.

11. Center support bearingfailure.

A. Seal failure.B. Mated with an oversizedstub shaft

A, B. Replace with new com-ponents.

12. Center support rubbercushion failure.

A. Misalignment.B. Located too close to heat source.

A. Replace and align.B. Shield from heat or move away from heat source.

13. Driveline vibration. A. Improper assembly.B. Excessive or unequal run-ning angles.C. Defective U-joint.D. Driveshaft out of straight-ness and balance specifica-tions.E. Worn slip assembly com-ponents.F. Driveline length exceeds maximum for speed range.

A. Make sure all snap rings or bolts are fully seated or torqued properly.B. Reduce and equalize running angles.C, E. Replace with new com-ponents.D. Straighten and balance.F. Redesign using larger diameter tubing or two piece driveline.

13-27

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Bearing Plate A retainer plate fixed to the back of a round bearing used to position the bearing in the yoke.

Balancing A procedure in which the distribution of mass in a rotating body is checked and altered where necessary to ensure that vibration does not occur during operation.

Ball Seat A full or segmented angular contact bearing located in a socket that supports and centers the ball stud.

Ball Stud A yoke generally used in CV applications which incorporates a stud onto which a ball is mounted.

Brinnelling Failure that occurs when the static forces between two curved surfaces in contact result in local yielding of one or both mating members to produce permanent surface discontinuity. Example: Needle roller indents on a u-joint trunnion or trunnions.

CardanUniversal Joint A non-constant velocity universal joint consisting of two yokes connected

by a cross through four bearings and driveable by external sources.

Center Support A rolling bearing element surrounded by rubber, mounted in a bracket configuration used to mount the support to an outside structure.

CenteringSocket Yoke A yoke assembly that functions as a self-aligning bearing and provides

support and a means of centering in double cardan universal joints.

Companion Flange A flanged member that attaches a driveline to drivetrain components, typically affixed by some bolt-together method.

Critical Speed The speed at which the rotational speed of a shaft coincides with the natural vibration frequency of the shaft, causing a dynamically unstable condition.

Cross andBearing Kit Drive member with four equally spaced trunnions in the same plane and

four bearing cups with attaching parts. Also referred to as a universal joint kit or u-joint kit.

Cross Hole A through hole located in each ear of a yoke used to locate a round bearing.

Double Cardan Universal Joint A near constant velocity universal joint consisting of two trunnion type

Cardan universal joints whose trunnion yokes are connected by a coupling yoke or H-yoke with internal supporting and centering means.

Driveline An assembly of one or more driveshafts with provisions for axial movement, which transmits torque and/or rotary motion.

Glossary Of Common Terms

13-28

GENERAL INFORMATION

Driveshaft An assembly of one or two universal joints connected to a solid or tubular shaft member.

Driveshaft LengthCenter to Center The distance between the outermost universal joint centers on a

driveshaft.

Drive Train Term used for the unit of all components from the Transmission to Rear differential. Also referred to as Power Train.

Ear One of two projecting parts of a yoke symmetrically located with respect to the rotational axis.

End Yoke A yoke which attaches a driveshaft to another drive train component such as the transmission.

Flange Yoke The yoke which attaches the driveshaft assembly to a companion flange.

Flinger A protective shield used in front of and behind the bearing and rubber on many center supports and end yokes.

Galling Failure that occurs when two sliding surfaces are subjected to such a combination of loads, sliding velocities, temperatures, environments, and lubricants, that massive surface destruction is caused by welding and tearing, plowing, and gouging. Example: Bearing cup/trunnion end galling on a cross and bearing kit.

H-Yoke A double yoke which connects the two halves of a double cardan universal joint.

Half Round YokeCross Hole A semicircular hole located on the end of each ear of some end yokes

and used to locate a round bearing.

Hub The central part of a yoke used for attachment to another member.

Inside Lock-up Term referring to either a cross and bearing kit or a yoke that utilizes a snap ring seated in a groove in the bearing cups and located inside the yoke ears to retain the kit in the yoke.

Joint Angle The angle described by the intersection of rotational axis of the input and output members of a universal joint and measured on the same plane described by these areas.

Liner A sound and vibrational deadening material added to the inside surfaces of a tube.

Lock-Up The dimensional distance between the two retaining surfaces in a driveline component used to locate the bearing surfaces.


13-29

GE

NE

RA

L IN

FOR

MA

TIO

N

GENERAL INFORMATION

Midship Stub Shaft. A short shaft, generally splined, used in applications requiring more than

one driveshaft. It mounts through the center of a support bearing and allows an additional driveshaft component to be fixed.

Outside Lock-Up Term referring to either a cross and bearing kit or a yoke that utilizes a

retaining ring in a groove near the outside edge of the yoke ear, rested against the outside face of the bearing cup.

Phase/Phase Angle The relative positioning of the universal joint yokes on a driveshaft or

driveline.

Retaining Ring A removable ring used as a shoulder to retain and position a round bearing in a hole.

Ring Groove The surface used for positioning a round bearing with a retaining ring. Round Bearing Consists of a round bearing cup with needle rollers designed to ride on a

trunnion. Seal A flexible member which prevents the escape of lubricant and the

entrance of foreign matter.

Slip Movement A permissible length of axial movement.

Slip Stub Shaft A short, machined shaft, generally splined, which, when used with a slip yoke allows axial movement.

Slip Yoke A yoke which allows axial movement.

Snap Ring Same as retaining ring.

Strap Bearing Clamp A semi circular device that conforms to the bearing profile holding them in place in half round and some DC yokes.

Swaged Tubing A tube with one or both ends having a smaller diameter then the middle

section.

Swing Diameter The maximum diameter of the circular path described by a rotating universal joint.

Thrust End The end of a cross trunnion used as a thrust surface.

T.I.R. Total Indicator Reading on a specific point thru 1 revolution of a shaft.

Torsional Damper A mechanical device, generally an inertia ring, attached to a drivetrain component by means of a rubber inner ring to minimize driveline vibration in addition to balancing.

Trunnion One of four projecting journals of a cross.


13-30

GENERAL INFORMATION

Tubing The tubular connecting member of a driveshaft.

Tube Diameter The outside diameter of a tube.

Tube Yoke A yoke with a piloting hub for attachment of a tube.

U-Bolt A clamping bolt with two parallel threaded legs used to retain a round bearing in certain end yoke designs.

Universal Joint A device which can transmit torque and/or rotary motion from one shaft to another at fixed or varying angles of intersection of the shaft areas.

Wall Thickness The measurement between the inside and outside diameter of a tube.

Weld Yoke Same as tube yoke.

Wing Bearing A member with a key and projecting wings used as the bearing base and positioning the thrust end of a cross trunnion.

Yoke Shaft A one piece member designed to incorporate a tube yoke, tubing and stub shaft. It is used in close-couple applications and eliminates the need to use tubing.

Zerk A lubrication fitting, usually threaded into a driveline component that will allow grease to be injected into the component, but does not allow grease to escape.


Slip YokeSNEAPCO slip yokes are manufactured from alloy steel

forgings and ductile castings for increased strength. Spline

forms are manufactured through broaching operations that

produce industry leading mating part fits. The tight toler-

ance of these spline fits coupled with reduced end play uni-

versal joints reduce time at the dynamic balancing opera-

tion and produce high-quality, vibration-free driveshafts.

Stub ShaftSNEAPCO stub shafts are manufactured to bearing toler-

ances from micro-alloy steel forgings. Our expertise in heat

treat produces a consistent case-hardened surface in the

critical wraparound area in the base radius. This increases

the material strength and eliminates component failures.

Spline forms are designed to eliminate hinging and runout

when mated with our slip yokes. Mid-ship stubs feature

precision ground diameters for center bearing press fit. Slip

stubs feature Dura-Slip™ low-friction, wear-resistent nylon

coating which provides long service life and reduced NVH

in complex driveshaft assemblies.

end YokeSNEAPCO provides extensive coverage of outboard,

mid-ship, transmission, differential, and constant velocity-

style end yokes. These end yokes are available in both

full round and half round easy service designs. Straight

side and involute spline tooth forms are offered. Cover-

age includes 1000 series auxiliary drives, light & medium

duty series, and 1610-1810 heavy duty products. Total part

numbers exceed 200 SKus ranging from pickup trucks to

over-the-road trucks.

Center SupportSNEAPCO offers a full line center support bearing program

featuring sealed bearings that are pre-lubricated before

packaging. The center support product line provides cover-

age for light duty pickup and vans, medium duty class 4

through 6 trucks and delivery vehicles, and heavy duty class

7 & 8 over-the-road and off highway trucks.

CV head aSSemblieSNEAPCO offers the broadest coverage of double-cardan

CV head assemblies. Many of these feature our proprietary

lubrication system in the critical centering mechanism. This

design produces improved grease flow to the important

linkage between the CV yokes. The universal joint lock-up

relationship to the pilot diameter and ball stud tube diameter

reduces driveshaft runout which eliminates vibrations.

auxiliarY/induStrial driVeShaftSNEAPCO’s selection of auxiliary/industrial driveshafts is one

of the most extensive in the industry. For truck-mounted,

shaft-driven hydraulic systems, NEAPCO offers single and

two-piece shaft options. Our exclusive Flex-Bell™ adjustable

shielding system is designed for the tight spaces found on

mobile equipment and provides a safety factor that no com-

petitive program can match. There is a crankshaft-driven

shaft system for snowplow and other front-mount machine

applications. A selection of standard- length industrial

driveshafts that are welded and balanced are also available.

unwelded driVeShaft aSSemblieSunwelded driveshaft assemblies are designed to allow service

of a large cross section of OE and custom applications from

a consolidated group of key driveline series sub-assemblies.

These kits are constructed with extended tubing sections

that can be cut to the required length, welded, and dynami-

cally balanced in a local facility. This will produce an entirely

new driveshaft with no used components while greatly

reducing the SKu inventory required to support targeted

vehicle populations. Coupled with on-the-spot availability,

these assemblies are a viable option for volume shaft

replacement.

SpeCialtY driVeShaftSNEAPCO supports a wide variety of custom, conversion,

and niche specialty driveshafts. These include traditional

cardan universal joint replacement shafts for the early

failures experienced with 6-ball constant velocity-style

high-speed propshafts. Specialty driveshafts for use in retro

fitting vehicles that have been modified from the original

OE driveline design or that have modified suspension are

a key strength of the NEAPCO program allowing you to

provide solutions to previously unserviceable problems.

Catalog No. UJ2017DWeatherly No. 090

2017Supersedes Cat. No. UJ2016D

Innovative Drivetrain Solutions®

Universal Joint Dimensional Reference Guide

GOLD Light Duty Universal Joints Neapco® Premium Quality Universal Joints

• 1310 - 1550 Universal Joint Series

• Lubricated for Life - High Performance Sealing System

• Meets OEM Performance Standards

• Covered by Neapco’s “Extended Warranty”

• Backed by Neapco’s Superior Customer Service

TABLE OF CONTENTS

Section Page NumberConversion U-Joints Listed by Part Number

1

Round Bearing Cap U-JointsListed by Bearing Diameter

3

Wing and Block U-Joints Listed By Size

10

All U-Joints Listed by Part Number

13

For Conversion U-JointsMeasure Round Bearing Diameter and Yoke Lock-up, or if the Series is know, reference U-Joint Type to determine the two different Series to be converted.

For Round Bearing Cap U-JointsMeasure Round Bearing Diameter and Yoke Lock-up to determine the correct part number.

For Wing and Block U-JointsMeasure the CL to CL value (centerline to centerline), Round Bearing Diameter (where applicable) and Yoke Lock-up to determine the correct part number.

U-Joints reference by Part NumberUse this numerical reference by part number to confirm dimensional attributes for each part number.

Bearing Type Abbreviations

Round bearing Types• ISR - Inside Snap Ring• OSR - Outside Snap Ring

Wing Bearing Types• DWT - Delta Wing Threaded• HWD - High Wing Drilled• LWD - Low Wing Drilled• LWT - Low Wing Threaded

HOW TO USE THIS CATALOG

Round Inside Lock-Up/Snap Ring (ISR)This universal joint design uses round bearing cups with a snap ring groove on the outside diameter of the bearings and machined flat surfaces on the inside of the yoke ears. It is easier to measure the lock-up for this style by measuring the yoke from inside ear to inside ear. If the yoke is not available, lock-up can be measured on the universal joint itself.

1. Assemble bearing cups onto cross.2. Install snap rings in bearing grooves.3. Remove rubber seals or clamp bearing cups

with a C-clamp or vise.4. Measure across the outside of the two installed

snap rings facing one another to obtain the lock-up dimension.

5. Measure the outside diameters of the bearingcups. Conversion joints and some OEapplications may have two different diameterbearing cups.

6. For conversion type universal joints repeat steps1-5 for the other leg of the universal joint.

Plastic InjectionThis style of lock-up was used in OEM Saginaw & AAM applications. When disassembled, OE joints are replaced with standard universal joint kits using round inside lock-up/snap rings.

U-Bolt & Bearing StrapThese two types of universal joints use round bearings secured in the yoke ears by a U-shaped bolt or strap that fits over the bearing cups. Measure in the same manner as round ISR or OSR.

Round Outside Lock-Up/Snap Ring (OSR)This universal joint design uses round bearing cups with a flat ground back surface. The cups are retained in the yoke by a snap ring that locks into a groove in the yoke crosshole.

1. Assemble bearing cups onto cross.2. Remove rubber seals or clamp bearing cups

with a C-clamp or vise.3. Measure across the outside of the two bearing

cups.4. Measure outside diameters of the bearing cups.

Conversion joints and some OE applications usetwo different diameter bearing cups.

5. For conversion type universal joints repeat steps1-4 for the other leg of the universal joint.

Round w/PlateThese universal joint kits use a flat plate welded to the back surface of the bearing cups. Two bolts retain each bearing in the yoke ears. Heavy Duty series using this style are 1610, 1710, 1760, and 1810. Basic reference dimensions required to identify each one are listed below. Measure between the inside surfaces of the retainer plates or across the outside surfaces of the yoke ears.

LOCK-UP SERIES KIT NO.5.312 1610 4-02796.094 1710 5-02807.000 1760 6-04077.547 1810 6-0281

UNIVERSAL JOINT IDENTIFICATION

Mechanics Design (Wing Bearings)This universal joint design uses a block- or wing-style bearing cup that locates in a flat flange-type yoke with a tongue and groove arrangement. Identify the bearing shape on the previous diagram. Some applications use two different bearing types.

1. Assemble bearing cups onto cross.2. Clamp the bearings with C-clamp or vise.3. Measure across two opposite bearings, in the

same manner as round outside lock-up/snapring to obtain the yoke lock-up.

4. Measure the cap holes CL to CL (centerline tocenterline) to identify the series.

5. Identify the proper cup (Bearing Type) DWT,HWD, LWD, or LWT.

QSP Universal Joints Neapco® quality with value based pricing• 1610 - 1810 Universal Joint Series

• Industry leading competitive price point

• Meets Neapco design and manufacturing standards

• Backed by Neapco’s superior customer service

• Available for immediate shipment

• Covered by Neapco’s “Limited Warranty” - 1 Year / Unlimited Mileage

CONVERSION U-JOINTS BY PART NUMBERPart

NumberBearing

Dia.Lock-up

Yoke Bearing Type LubeFitting

Cap HolesCL to CL

ConvertsPart# U-Joint Type

1-0134 1.0631.063

3.2193.622 ROUND-OSR 1 Cross 1-0153 to

2-4800 SPICER 1310 / SPICER 1330

1-0248 1.0001.063

1.7172.438 ROUND-ISR / OSR 1 Cross 1-0105 to

1-0443 SPICER 1110 / SPICER 1210

1-0445 1.0631.063


1-0153SPICER 1310 SPEC / SPICER1310

1-0616 0.9380.969

1.5001.443 ROUND-ISR 1 Cross 1-0170 to

1-1475SPICER 1000 / PTOROCKWELL L6N

1-3650 1.0001.063


1-0153MECHANICS 2RL / SPICER1310

1-5349 1.0631.125


2-4900SPICER 1310 / CLEVELANDP55-55-675

2-0291 1.063 3.2193.125

ROUND-OSR /WING-LWT 1 Bearing 1.312 1-0153 to

1-2171SPICER 1310 / MECHANICS2CL

2-0355 1.0631.126

3.6222.622 ROUND-OSR / ISR 1 Cross 2-4800 to

2-1175 SPICER 1330 / DETROIT 7290

2-0355G 1.0631.126

3.6222.622 ROUND-OSR / ISR None 2-4800 to

2-1175 SPICER 1330 / DETROIT 7290

2-0527 1.0781.126

2.1252.622 ROUND-ISR 1 Bearing 1-6301 to

2-1175DETROIT 7260 / DETROIT7290

2-0599 1.0631.078


1-6301 SPICER 1330 / DETROIT 7260

2-1153 1.1251.188


2-0053SPICER 1350 / MECHANICS3R

2-1435 1.1881.188

3.6224.187 ROUND-OSR None 2-0053 to

2-0054 SPICER 1350 / SPICER 1410

2-1569 1.0631.125



2-1569G 1.0631.125



2-3049 1.1251.125


2-4900CLEVELAND P55-55-675 /MECHANICS 3R

2-3050 1.0631.188


2-0053 SPICER 1330 / SPICER 1350

2-3100 1.0631.078


1-6301 SPICER 1310 / DETROIT 7260

2-3190 1.1881.232


3-0056 SPICER 1410 / DETROIT 5380

2-4953 1.1251.188


2-0053CLEVELAND P55-55-675 /SPICER 1350

3-1448 1.1881.375


3-0188 SPICER 1410 / SPICER 1480

3-3130 1.0631.125



3-3131 1.0631.126


2-1175 SPICER 1310 / DETROIT 7290

3-3133 1.1251.126


2-1175MECHANICS 3R / DETROIT7290

3-3140 1.0631.188


2-0053 SPICER 1310 / SPICER 1350

6-0324 1.937 7.5478.250

ROUND-W/PLATE/ WING-HWD 2 Cross 2.812 6-0281 to

6-9016SPICER 1810 / MECHANICS9C

CONVERSION U-JOINTS BY PART NUMBERPart

NumberBearing

Dia.Lock-up


Cap HolesCL to CL


6-0326 2.186 8.0948.250



LISTING BY ROUND BEARING CAPSPart

NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-0475 0.7500.750

1.9061.906 ROUND-OSR None NEAPCO 0400 STEERING

1-0028 0.7880.788

1.4961.496 ROUND-ISR None NISSAN, TOYOTA

1-0011 0.7880.788

2.2602.260 ROUND-OSR 1 Bearing TOYOTA

1-0121 0.8660.866

2.1262.126 ROUND-OSR 1 Cross PTO METRIC B&P SERIES 1

1-1001 0.8660.866

2.1572.157 ROUND-OSR 1 Cross PTO METRIC WALTERSCHEID

SERIES 2100

1-0430 0.8670.867

1.4001.400 ROUND-ISR 1 Bearing NISSAN, SUBARU, TOYOTA

staked replacement

1-1604 0.8860.886

1.4821.482 ROUND-ISR 1 Bearing MAZDA

1-0221 0.9370.937


1-0103 0.9380.938

1.5001.500 ROUND-ISR None SPICER 1000 STEERING

1-0170 0.9380.938

1.5001.500 ROUND-ISR 1 Cross SPICER 1000

1-0170NPL 0.9380.938

1.5001.500 ROUND-ISR None SPICER 1000

1-0171 0.9380.938

1.5001.500 ROUND-ISR 1 Bearing SPICER 1000

1-0300 0.9380.938

2.4122.412 ROUND-OSR 1 Bearing SPICER 1100

1-0616 0.9380.969



1-0431 0.9470.947

1.9001.900 ROUND-ISR 1 Bearing BMW, MAZDA staked

replacement

1-1475 0.9690.969

1.4431.443 ROUND-ISR 1 Cross PTO ROCKWELL L6N

1-1606 0.9850.985


1-0027 0.9850.985

1.7361.736 ROUND-ISR 1 Bearing NISSAN, SUBARU

1-1557 0.9850.985

2.5172.517 ROUND-OSR 1 Bearing DODGE, MITSUBISHI, SUZUKI

1-1516 0.9850.985

3.0273.027 ROUND-OSR 1 Cross CHRYSLER, MITSUBISHI

1-2134 1.000 2.3423.125

ROUND-ISR /WING-LWT 1 Cross 1.312 MECHANICS 2 CRL

2-2700 1.000 2.3423.125

ROUND-OSR /WING-LWD 1 Bearing 1.312 MECHANICS 2CRL

1-0105 1.0001.000


1-1875 1.0001.000

2.3422.342 ROUND-ISR 1 Cross PTO NEAPCO 1800

1-3600 1.0001.000

2.3422.342 ROUND-ISR 1 Cross MECHANICS 2RL

1-0248 1.0001.063


1-0443 SPICER 1110 / SPICER 1210


NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-3650 1.0001.063



1-2173 1.0001.125


1-0013 1.0241.024

1.8431.843 ROUND-ISR 1 Bearing TOYOTA

1-0012 1.0241.024

2.2002.200 ROUND-ISR None TOYOTA

2-0382 1.0241.024

2.7562.756 ROUND-OSR 1 Bearing SUZUKI

2-0506 1.0441.044

1.9881.988 ROUND-ISR 1 Bearing KIA

2-0291 1.063 3.2193.125



2-0456 1.0631.063

1.6401.640 ROUND-ISR None SPICER 1210WJ

1-0449 1.0631.063

1.9301.930 ROUND-ISR 1 Bearing INFINITI, NISSAN

1-0174 1.0631.063

2.1882.188 ROUND-ISR 1 Cross SPICER 1310WJ

1-0175 1.0631.063

2.1882.188 ROUND-ISR 1 Bearing SPICER 1310WJ

1-0350 1.0631.063

2.3432.343 ROUND-ISR 1 Cross SPICER 1310 SPEC

1-0445 1.0631.063



1-5900 1.0631.063

2.3803.219 ROUND-ISR / OSR 1 Cross CLEVELAND S55-55-2

1-0443 1.0631.063


1-0439 1.0631.063

2.6462.646 ROUND-OSR 1 Bearing SATURN

1-0321 1.0631.063


SERIES I

2-1203 1.0631.063

2.7813.622 ROUND-ISR / OSR 1 Cross CLEVELAND P55-55-2

1-0421 1.0631.063


1-0005 1.0631.063


2-0520 1.0631.063

3.1453.145 ROUND-OSR 1 Cross HYUNDAI

1-0153 1.0631.063

3.2193.219 ROUND-OSR 1 Cross SPICER 1310

1-0153G 1.0631.063

3.2193.219 ROUND-OSR None SPICER 1310

1-0154 1.0631.063


1-0200 1.0631.063


1-0278 1.0631.063

3.2193.219 ROUND-OSR 1 Cross SPICER 1310 CV


NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-0134 1.0631.063


2-4800 SPICER 1310 / SPICER 1330

2-4800 1.0631.063


2-4800G 1.0631.063


2-4801 1.0631.063


2-3100 1.0631.078


1-6301 SPICER 1310 / DETROIT 7260

2-0599 1.0631.078


1-6301 SPICER 1330 / DETROIT 7260

1-4635 1.0631.125


2-4900 1.0631.125


2-4900G 1.0631.125

2.7813.622 ROUND-ISR / OSR None CLEVELAND P55-55-675

3-3130 1.0631.125



1-5349 1.0631.125



2-1569 1.0631.125



2-1569G 1.0631.125



3-3131 1.0631.126


2-1175 SPICER 1310 / DETROIT 7290

2-0355 1.0631.126


2-1175 SPICER 1330 / DETROIT 7290

2-0355G 1.0631.126


2-1175 SPICER 1330 / DETROIT 7290

3-3140 1.0631.188


2-0053 SPICER 1310 / SPICER 1350

2-3050 1.0631.188


2-0053 SPICER 1330 / SPICER 1350

2-2480 1.0631.260

3.8592.992 ROUND-OSR 1 Cross WALTERSCHEID 2480

1-1275 1.0641.064


2-4805 1.0661.066

3.6223.622 ROUND-OSR None VISTEON 1330XC

3-0488 1.0661.066

3.7873.787 ROUND-OSR None VISTEON SPECIAL staked

replacement

1-6300 1.0781.078

2.1252.125 ROUND-ISR 1 Bearing DETROIT 7260

1-6301 1.0781.078

2.1252.125 ROUND-ISR 1 Cross DETROIT 7260

2-0527 1.0781.126



1-0436 1.1021.102



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-0029 1.1031.103

2.2052.205 ROUND-ISR 1 Cross INFINITI, NISSAN, SUBARU

1-1610 1.1031.103

2.3212.321 ROUND-ISR 1 Bearing FORD, MAZDA

2-3102 1.125 2.5563.563

ROUND-ISR /WING-LWT 1 Cross 1.438 MECHANICS 3CRL

3-4152 1.125 3.2434.234

ROUND-ISR /WING-LWT 1 Cross 1.438 MECHANICS 4C

1-5800 1.1251.125

2.1252.125 ROUND-ISR 1 Bearing MECHANICS 2 1/2 RL

2-3010 1.1251.125

2.5562.556 ROUND-ISR 1 Bearing MECHANICS 3R

2-3011 1.1251.125

2.5562.556 ROUND-ISR 1 Cross MECHANICS 3R

2-3011G 1.1251.125

2.5562.556 ROUND-ISR None MECHANICS 3R

2-3049 1.1251.125



3-3133 1.1251.126



2-1153 1.1251.188



2-4953 1.1251.188



2-1175 1.1261.126


2-1175G 1.1261.126

2.6222.622 ROUND-ISR None DETROIT 7290

1-2075 1.1261.126

2.6282.628 ROUND-OSR 1 Cross PTO ROCKWELL L14N

1-1612 1.1431.143


2-0383 1.1431.143

2.0812.081 ROUND-ISR 1 Cross ACURA, CHEVROLET, HONDA,

ISUZU

2-0317 1.1431.143

2.8352.835 ROUND-ISR 1 Bearing ACURA, ISUZU

2-0151 1.1811.181

2.2902.290 ROUND-ISR 1 Cross MITSUBISHI

1-0297 1.1881.188


1-0298 1.1881.188


2-0057 1.1881.188

2.4052.405 ROUND-ISR None SPICER SPL30WJ / 1350WJ

2-6200 1.1881.188

2.5623.622 ROUND-ISR / OSR 1 Cross CLEVELAND R55-55-2

2-6600 1.1881.188

3.1274.187 ROUND-ISR / OSR 1 Cross CLEVELAND O55-55-2

2-0521 1.1881.188


2-1355 1.1881.188

3.6123.612 ROUND-OSR None AAM 1355


NumberBearing

Dia.Lock-up


Cap HolesCL to CL


2-0052 1.1881.188


2-0053 1.1881.188


2-0053G 1.1881.188


3-0621 1.1881.188


2-1435 1.1881.188


2-0054 SPICER 1350 / SPICER 1410

3-0415 1.1881.188


2-0054 1.1881.188


2-0054G 1.1881.188


2-3190 1.1881.232


3-0056 SPICER 1410 / DETROIT 5380

3-1448 1.1881.375


3-0188 SPICER 1410 / SPICER 1480

3-0056 1.2321.232


2-2275 1.2521.252


2-2276 1.2521.252

3.2093.209 ROUND-OSR 2 Bearing PTO ROCKWELL L35N

2-2475 1.2521.252

4.0854.085 ROUND-OSR 1 Bearing PTO NEAPCO 2200 & N44 CV

2-0508 1.2601.260

2.3622.362 ROUND-ISR 1 Cross KIA

2-0020 1.2601.260

2.5202.520 ROUND-ISR 1 Cross TOYOTA

2-2421 1.2601.260


SERIES 2400

3-2580 1.2601.417


3-0044 1.3101.310

2.7892.789 ROUND-ISR 1 Cross ROCKWELL 44R

3-5132 1.313 3.3124.529

ROUND-ISR /WING-DWT 1 Cross 1.688 MECHANICS 5C

4-6107 1.313 4.3095.529


4-6123 1.3131.313

4.3094.309 ROUND-ISR 1 Cross MECHANICS 6C

3-0485 1.3751.375

2.9202.920 ROUND-ISR None AAM 1485WJ

3-0332 1.3751.375


3-1557 1.3751.375

3.7023.702 ROUND-ISR 1 Cross AAM1555WJ

3-0157 1.3751.375

3.7803.780 ROUND-ISR 1 Cross SPICER SPL70WJ / 1550WJ


NumberBearing

Dia.Lock-up


Cap HolesCL to CL


3-0486 1.3751.375


3-0188 1.3751.375

4.1874.187 ROUND-OSR 1 Cross SPICER 1480 & PTO NEAPCO

2600

3-0188G 1.3751.375

4.1874.187 ROUND-OSR None SPICER 1480 & NEAPCO 2600

PTO

3-6700 1.3751.375

4.1874.187 ROUND-OSR 1 Cross CLEVELAND D56-55-2

3-1555 1.3751.375


3-0155 1.3751.375


3-0155G 1.3751.375


3-6800 1.3751.375

4.9654.965 ROUND-OSR 1 Cross CLEVELAND U56-55-2

3-0721 1.3771.377


3-0821 1.3771.377


3-2521 1.4171.417


SERIES 2500

3-0045 1.5321.532

4.3094.309 ROUND-OSR 1 Cross ROCKWELL 55N

3-0055 1.5601.560

4.5504.550 ROUND-W/PLATE 1 Cross SPICER 1500

3-0921 1.6141.614


3-1021 1.6141.614


4-1090 1.6251.625

4.9574.957 ROUND-OSR 1 Cross SPICER SPL90 & SPL100

4-0165 1.6251.625


4-0279 1.8751.875


4-0279GXL 1.8751.875


4-0279Q 1.8751.875


4-0674 1.8751.875

5.3125.312

ROUND-W/PLATE/ ROUND 2 Cross SPICER 1610 HALF ROUND

4-0674GXL 1.8751.875

5.3125.312


4-0674Q 1.8751.875

5.3125.312


6-0324 1.937 7.5478.250



5-0280 1.9371.937


5-0280GXL 1.9371.937



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


5-0280Q 1.9371.937


6-0675 1.9371.937

6.0946.187


6-0675GXL 1.9371.937

6.0946.187


6-0675Q 1.9371.937

6.0946.187


6-0407 1.9371.937


6-0407GXL 1.9371.937


6-0407Q 1.9371.937


6-0677 1.9371.937

7.0007.093


6-0677GXL 1.9371.937

7.0007.093


6-0677Q 1.9371.937

7.0007.093


6-0281 1.9371.937


6-0281GXL 1.9371.937


6-0281Q 1.9371.937


6-0676 1.9371.937

7.5477.640


6-0676GXL 1.9371.937

7.5477.640


6-0676Q 1.9371.937

7.5477.640


6-0020 2.060 6.8807.060

ROUND-OSR /WING-RPL HWD None 2.812 MERITOR 20R

6-0025 2.060 8.2008.380


6-1170 2.1652.165

6.0246.457

ROUND-NPL /ROUND 1 Cross SPICER SPL170

6-0326 2.186 8.0948.250



6-0308 2.1862.186


6-0124 2.3122.312


6-1250 2.3612.361

5.9846.413


WING AND BLOCK STYLE BY SIZEPart

NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-2134 1.000 2.3423.125


1-2171 3.1253.125 WING-LWT 1 Bearing 1.312 MECHANICS 2CL

1-2185 3.1253.125

WING-LWD /WING-LWT 1 Bearing 1.312 MECHANICS 2CL

1-2186 3.1253.125 WING-LWD 1 Bearing 1.312 MECHANICS 2CL

2-0291 1.063 3.2193.125



2-2700 1.000 2.3423.125


2-3102 1.125 2.5563.563


3-3152 3.5633.563 WING-LWT 1 Cross 1.438 MECHANICS 3CL

3-3158 3.5633.563

WING-LWT /WING-HWD 1 Cross 1.438 MECHANICS 3C

3-4123 4.2344.234

WING-LWT /WING-LWD 1 Cross 1.438 MECHANICS 4C

3-4138 4.2344.234 WING-LWT 1 Cross 1.438 MECHANICS 4C

3-4140 4.2344.234


3-4143 4.2344.234 WING-HWD 1 Cross 1.438 MECHANICS 4C

3-4152 1.125 3.2434.234


3-5132 1.313 3.3124.529


4-5122 4.5294.529 WING-DWT 1 Cross 1.688 MECHANICS 5C

4-5173 4.5294.529

WING-HWD /WING-DWT 1 Cross 1.688 MECHANICS 5C


4-5262 4.5294.529 WING-HWD None 1.688 MECHANICS 5C

4-6107 1.313 4.3095.529


4-6114 5.5295.529





5-5031 4.5294.529

WING-HWD /WING-DWT None 1.688 MECHANICS 5C special W/

hole in cross

4-6162 5.5295.841

WING-DWT /WING-DWT 1 Cross 1.688 /

1.938MECHANICS 6C / MECHANICS7C


NumberBearing

Dia.Lock-up


Cap HolesCL to CL


4-6163 5.5295.841

WING-DWT /WING-HWD 1 Cross 1.688 /


4-5800 5.3125.312 WING-HWD 1 Cross 1.937 ROCKWELL 58WB

4-5801 5.3125.312 WING-DWT 1 Cross 1.937 ROCKWELL 58WB-1

4-5802 5.3125.312

WING-HWD /WING-DWT 1 Cross 1.937 ROCKWELL 58WB-2



5-7207 5.8415.841





6-8207 8.1228.122

WING-DWT /WING-HWD 1 Cross 1.938 MECHANICS 8C


6-0020 2.060 6.8807.060


6-0025 2.060 8.2008.380


6-0324 1.937 7.5478.250



6-0326 2.186 8.0948.250



6-8514 6.5006.500 WING-LWT None 2.812 MECHANICS 8.5C

6-8515 6.5006.500

WING-LWT /WING-HWD None 2.812 MECHANICS 8.5C

6-8516 6.5006.500 WING-HWD 1 Cross 2.812 MECHANICS 8.5C



6-9017 8.2508.250





6-1007 8.3758.375 WING-LWD 1 Cross 3.625 MECHANICS 10C


NumberBearing

Dia.Lock-up


Cap HolesCL to CL




SIZE IDENTIFICATION BY PART NUMBERPart

NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-0005 1.0631.063


1-0011 0.7880.788

2.2602.260 ROUND-OSR 1 Bearing TOYOTA

1-0012 1.0241.024

2.2002.200 ROUND-ISR None TOYOTA

1-0013 1.0241.024


1-0027 0.9850.985

1.7361.736 ROUND-ISR 1 Bearing NISSAN, SUBARU

1-0028 0.7880.788

1.4961.496 ROUND-ISR None NISSAN, TOYOTA

1-0029 1.1031.103

2.2052.205 ROUND-ISR 1 Cross INFINITI, NISSAN, SUBARU

1-0103 0.9380.938

1.5001.500 ROUND-ISR None SPICER 1000 STEERING

1-0105 1.0001.000


1-0121 0.8660.866


1-0134 1.0631.063


2-4800 SPICER 1310 / SPICER 1330

1-0153 1.0631.063


1-0153G 1.0631.063


1-0154 1.0631.063


1-0170 0.9380.938

1.5001.500 ROUND-ISR 1 Cross SPICER 1000

1-0170NPL 0.9380.938

1.5001.500 ROUND-ISR None SPICER 1000

1-0171 0.9380.938


1-0174 1.0631.063


1-0175 1.0631.063


1-0200 1.0631.063


1-0221 0.9370.937


1-0248 1.0001.063


1-0443 SPICER 1110 / SPICER 1210

1-0278 1.0631.063

3.2193.219 ROUND-OSR 1 Cross SPICER 1310 CV

1-0297 1.1881.188


1-0298 1.1881.188


1-0300 0.9380.938



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-0321 1.0631.063


SERIES I

1-0350 1.0631.063

2.3432.343 ROUND-ISR 1 Cross SPICER 1310 SPEC

1-0421 1.0631.063


1-0430 0.8670.867

1.4001.400 ROUND-ISR 1 Bearing NISSAN, SUBARU, TOYOTA

staked replacement

1-0431 0.9470.947

1.9001.900 ROUND-ISR 1 Bearing BMW, MAZDA staked

replacement

1-0436 1.1021.102


1-0439 1.0631.063

2.6462.646 ROUND-OSR 1 Bearing SATURN

1-0443 1.0631.063


1-0445 1.0631.063



1-0449 1.0631.063

1.9301.930 ROUND-ISR 1 Bearing INFINITI, NISSAN

1-0475 0.7500.750

1.9061.906 ROUND-OSR None NEAPCO 0400 STEERING

1-0616 0.9380.969



1-1001 0.8660.866


SERIES 2100

1-1275 1.0641.064


1-1475 0.9690.969


1-1516 0.9850.985

3.0273.027 ROUND-OSR 1 Cross CHRYSLER, MITSUBISHI

1-1557 0.9850.985

2.5172.517 ROUND-OSR 1 Bearing DODGE, MITSUBISHI, SUZUKI

1-1604 0.8860.886


1-1606 0.9850.985


1-1610 1.1031.103

2.3212.321 ROUND-ISR 1 Bearing FORD, MAZDA

1-1612 1.1431.143


1-1875 1.0001.000

2.3422.342 ROUND-ISR 1 Cross PTO NEAPCO 1800

1-2075 1.1261.126


1-2134 1.000 2.3423.125


1-2171 3.1253.125 WING-LWT 1 Bearing 1.312 MECHANICS 2CL

1-2173 1.0001.125



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


1-2185 3.1253.125

WING-LWD /WING-LWT 1 Bearing 1.312 MECHANICS 2CL

1-2186 3.1253.125 WING-LWD 1 Bearing 1.312 MECHANICS 2CL

1-3600 1.0001.000


1-3650 1.0001.063



1-4635 1.0631.125


1-5349 1.0631.125



1-5800 1.1251.125

2.1252.125 ROUND-ISR 1 Bearing MECHANICS 2 1/2 RL

1-5900 1.0631.063


1-6300 1.0781.078

2.1252.125 ROUND-ISR 1 Bearing DETROIT 7260

1-6301 1.0781.078


2-0020 1.2601.260

2.5202.520 ROUND-ISR 1 Cross TOYOTA

2-0052 1.1881.188


2-0053 1.1881.188


2-0053G 1.1881.188


2-0054 1.1881.188


2-0054G 1.1881.188


2-0057 1.1881.188

2.4052.405 ROUND-ISR None SPICER SPL30WJ / 1350WJ

2-0151 1.1811.181

2.2902.290 ROUND-ISR 1 Cross MITSUBISHI

2-0291 1.063 3.2193.125



2-0317 1.1431.143

2.8352.835 ROUND-ISR 1 Bearing ACURA, ISUZU

2-0355 1.0631.126


2-1175 SPICER 1330 / DETROIT 7290

2-0355G 1.0631.126


2-1175 SPICER 1330 / DETROIT 7290

2-0382 1.0241.024

2.7562.756 ROUND-OSR 1 Bearing SUZUKI

2-0383 1.1431.143

2.0812.081 ROUND-ISR 1 Cross ACURA, CHEVROLET, HONDA,

ISUZU

2-0456 1.0631.063


2-0506 1.0441.044



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


2-0508 1.2601.260

2.3622.362 ROUND-ISR 1 Cross KIA

2-0520 1.0631.063

3.1453.145 ROUND-OSR 1 Cross HYUNDAI

2-0521 1.1881.188


2-0527 1.0781.126



2-0599 1.0631.078


1-6301 SPICER 1330 / DETROIT 7260

2-1153 1.1251.188



2-1175 1.1261.126


2-1175G 1.1261.126

2.6222.622 ROUND-ISR None DETROIT 7290

2-1203 1.0631.063


2-1355 1.1881.188


2-1435 1.1881.188


2-0054 SPICER 1350 / SPICER 1410

2-1569 1.0631.125



2-1569G 1.0631.125



2-2275 1.2521.252


2-2276 1.2521.252

3.2093.209 ROUND-OSR 2 Bearing PTO ROCKWELL L35N

2-2421 1.2601.260


SERIES 2400

2-2475 1.2521.252

4.0854.085 ROUND-OSR 1 Bearing PTO NEAPCO 2200 & N44 CV

2-2480 1.0631.260


2-2700 1.000 2.3423.125


2-3010 1.1251.125

2.5562.556 ROUND-ISR 1 Bearing MECHANICS 3R

2-3011 1.1251.125

2.5562.556 ROUND-ISR 1 Cross MECHANICS 3R

2-3011G 1.1251.125

2.5562.556 ROUND-ISR None MECHANICS 3R

2-3049 1.1251.125



2-3050 1.0631.188


2-0053 SPICER 1330 / SPICER 1350

2-3100 1.0631.078


1-6301 SPICER 1310 / DETROIT 7260

2-3102 1.125 2.5563.563



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


2-3190 1.1881.232


3-0056 SPICER 1410 / DETROIT 5380

2-4800 1.0631.063


2-4800G 1.0631.063


2-4801 1.0631.063


2-4805 1.0661.066

3.6223.622 ROUND-OSR None VISTEON 1330XC

2-4900 1.0631.125


2-4900G 1.0631.125

2.7813.622 ROUND-ISR / OSR None CLEVELAND P55-55-675

2-4953 1.1251.188



2-6200 1.1881.188

2.5623.622 ROUND-ISR / OSR 1 Cross CLEVELAND R55-55-2

2-6600 1.1881.188

3.1274.187 ROUND-ISR / OSR 1 Cross CLEVELAND O55-55-2

3-0044 1.3101.310

2.7892.789 ROUND-ISR 1 Cross ROCKWELL 44R

3-0045 1.5321.532

4.3094.309 ROUND-OSR 1 Cross ROCKWELL 55N

3-0055 1.5601.560


3-0056 1.2321.232


3-0155 1.3751.375


3-0155G 1.3751.375


3-0157 1.3751.375

3.7803.780 ROUND-ISR 1 Cross SPICER SPL70WJ / 1550WJ

3-0188 1.3751.375

4.1874.187 ROUND-OSR 1 Cross SPICER 1480 & PTO NEAPCO

2600

3-0188G 1.3751.375

4.1874.187 ROUND-OSR None SPICER 1480 & NEAPCO 2600

PTO

3-0332 1.3751.375


3-0415 1.1881.188


3-0485 1.3751.375

2.9202.920 ROUND-ISR None AAM 1485WJ

3-0486 1.3751.375


3-0488 1.0661.066

3.7873.787 ROUND-OSR None VISTEON SPECIAL staked

replacement

3-0621 1.1881.188


3-0721 1.3771.377



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


3-0821 1.3771.377


3-0921 1.6141.614


3-1021 1.6141.614


3-1448 1.1881.375


3-0188 SPICER 1410 / SPICER 1480

3-1555 1.3751.375


3-1557 1.3751.375

3.7023.702 ROUND-ISR 1 Cross AAM1555WJ

3-2521 1.4171.417


SERIES 2500

3-2580 1.2601.417


3-3130 1.0631.125



3-3131 1.0631.126


2-1175 SPICER 1310 / DETROIT 7290

3-3133 1.1251.126



3-3140 1.0631.188


2-0053 SPICER 1310 / SPICER 1350

3-3152 3.5633.563 WING-LWT 1 Cross 1.438 MECHANICS 3CL

3-3158 3.5633.563


3-4123 4.2344.234

WING-LWT /WING-LWD 1 Cross 1.438 MECHANICS 4C


3-4140 4.2344.234



3-4152 1.125 3.2434.234


3-5132 1.313 3.3124.529


3-6700 1.3751.375

4.1874.187 ROUND-OSR 1 Cross CLEVELAND D56-55-2

3-6800 1.3751.375

4.9654.965 ROUND-OSR 1 Cross CLEVELAND U56-55-2

4-0165 1.6251.625


4-0279 1.8751.875


4-0279GXL 1.8751.875


4-0279Q 1.8751.875



NumberBearing

Dia.Lock-up


Cap HolesCL to CL


4-0674 1.8751.875

5.3125.312


4-0674GXL 1.8751.875

5.3125.312


4-0674Q 1.8751.875

5.3125.312


4-1090 1.6251.625

4.9574.957 ROUND-OSR 1 Cross SPICER SPL90 & SPL100


4-5173 4.5294.529




4-5800 5.3125.312 WING-HWD 1 Cross 1.937 ROCKWELL 58WB

4-5801 5.3125.312 WING-DWT 1 Cross 1.937 ROCKWELL 58WB-1

4-5802 5.3125.312

WING-HWD /WING-DWT 1 Cross 1.937 ROCKWELL 58WB-2

4-6107 1.313 4.3095.529


4-6114 5.5295.529


4-6123 1.3131.313

4.3094.309 ROUND-ISR 1 Cross MECHANICS 6C



4-6162 5.5295.841

WING-DWT /WING-DWT 1 Cross 1.688 /


4-6163 5.5295.841

WING-DWT /WING-HWD 1 Cross 1.688 /



5-0280 1.9371.937


5-0280GXL 1.9371.937


5-0280Q 1.9371.937


5-5031 4.5294.529

WING-HWD /WING-DWT None 1.688 MECHANICS 5C special W/

hole in cross



5-7207 5.8415.841



NumberBearing

Dia.Lock-up


Cap HolesCL to CL



6-0020 2.060 6.8807.060


6-0025 2.060 8.2008.380


6-0124 2.3122.312


6-0281 1.9371.937


6-0281GXL 1.9371.937


6-0281Q 1.9371.937


6-0308 2.1862.186


6-0324 1.937 7.5478.250



6-0326 2.186 8.0948.250



6-0407 1.9371.937


6-0407GXL 1.9371.937


6-0407Q 1.9371.937


6-0675 1.9371.937

6.0946.187


6-0675GXL 1.9371.937

6.0946.187


6-0675Q 1.9371.937

6.0946.187


6-0676 1.9371.937

7.5477.640


6-0676GXL 1.9371.937

7.5477.640


6-0676Q 1.9371.937

7.5477.640


6-0677 1.9371.937

7.0007.093


6-0677GXL 1.9371.937

7.0007.093


6-0677Q 1.9371.937

7.0007.093



6-1007 8.3758.375 WING-LWD 1 Cross 3.625 MECHANICS 10C




NumberBearing

Dia.Lock-up


Cap HolesCL to CL


6-1170 2.1652.165

6.0246.457



6-1250 2.3612.361

5.9846.413





6-8207 8.1228.122

WING-DWT /WING-HWD 1 Cross 1.938 MECHANICS 8C

6-8514 6.5006.500 WING-LWT None 2.812 MECHANICS 8.5C

6-8515 6.5006.500

WING-LWT /WING-HWD None 2.812 MECHANICS 8.5C





6-9017 8.2508.250


BEARING STRAP KIT DIMENSIONAL SIZE LISTING

U-BOLT KIT DIMENSIONAL SIZE LISTING

A

C

B

B

C

D

A

Part No. DL Series Dimension Color

1-1077 0600 0.050 copper

1-1771 7260 0.062 copper

1-8297 3R 0.089 black

3-7700 1310 / 1330 0.059 black

3-7705 1310 / 1330 0.061 white

Optional snap rings for tight or loose lockup fit in some applications

ABearing

OD

BLength

CCL-CL

DThread

Size

EThreadLength

Torque (Ft-Lbs.)

PartNumber

Series

1.063 1.76 1.406 5/16-24 0.55 14-17 1-0089 1310/1330

1.188 1.97 1.656 3/8-24 0.62 20-24 1-0099 1350/1410

1.375 2.25 1.906 7/16-20 0.72 32-37 1-0109 1480/1550

1.125 1.80 1.578 5/16-24 0.72 14-17 1-0189 FORD 1310/1330

BearingOD

ACL-CL

BWidth

CHole

DThread

Size

EUnder Head

Torque (Ft-Lbs.)

PartNumber

Series

1.125 1.53 0.62 0.28 1/4-28 0.59 13-18 1-0018 7290

1.188 1.81 0.75 0.34 5/16-24 0.75 30-35 1-0019 1350/1410 (SPR)

1.188 1.66 0.75 0.34 5/16-24 1.31 30-35 1-0020 1350/1410 (GM)

1.375 1.93 0.75 0.35 5/16-24 1.28 14-17 1-0030 1485/1555

1.375 2.12 0.81 0.41 3/8-24 0.75 55-60 1-0021 1480/1550

1.063 1.59 0.69 0.28 1/4-28 0.59 13-18 1-0022 1310/1330 (SPR)

1.078 1.50 0.56 0.28 1/4-28 0.62 13-18 1-0023 7260

1.063 1.59 0.62 0.34 5/16-24 1.50 30-35 1-0024 1310/1330 (GM)

1.125 1.81 0.62 0.34 5/16-24 1.50 30-35 1-0025 3R

1.625 2.31 0.88 0.41 3/8-24 0.75 45-60 N90-70-28X SPL90 / 100

1.875 2.50 0.94 0.41 3/8-24 0.75 45-60 1-0045 1610

1.937 2.81 1.00 0.53 1/2-20 1.00 115-135 1-0046 1710/1760/1810

2.165 3.228 1.100 0.488 M12x1.25 0.984 115-135 N170-70-08X SPL170

2.361 3.444 1.132 0.488 M12x1.25 0.984 115-135 N250-70-08X SPL250

U-Bolt Dimensions Bearing Strap Dimensions

D EE

SPECIAL APPLICATION SNAP RINGS

Part No. DL Series Dimension Color

3-7706 1310 / 1330 0.063 blue

3-7807 1350 / 1410 0.061 green

3-7808 1350 / 1410 0.063 yellow

3-7810 1350 / 1410 0.056 gray

UNIVERSAL JOINT KIT and HARDWARE LISTINGStandard Universal Joint part numbers with optional versions and associated hardware

SilverU-Joint

GoldU-Joint

Bearing Lube

U-Joint

Bearing Strap

BearingU-Bolt

1-0153 1-0153G 1-0154 1-0022 1-0089

1-0153 1-0153G 1-0154 1-0024 1-0089

1-0174 1-0175

1-0297 1-0298

1-0443 1-0022 1-0089

1-6301 1-6300 1-0023

2-0053 2-0053G 2-0052 1-0019 1-0099

2-0053 2-0053G 2-0052 1-0020 1-0099

2-0054 2-0054G 1-0019 1-0099

2-0054 2-0054G 1-0020 1-0099

2-0335 1-0024

2-1175 2-1175G 1-0018

2-1355 1-0020

2-1569 2-1569G 1-0025

2-3011 2-3011G 2-3010 1-0025

2-4800 2-4800G 2-4801 1-0022 1-0089

2-4800 2-4800G 2-4801 1-0024 1-0089

2-4900 2-4900G 1-0189

3-0155 1-0021 1-0109

3-0188 1-0021 1-0109

3-0415 1-0020

3-0486 1-0030

3-1555 1-0030

3-3130 1-0025

4-1090 N90-70-28X

6-1170 N170-70-08X

6-1250 N250-70-08X

COMMON UNIVERSAL JOINTS BY SERIESDRIVELINE NEAPCO NEAPCO NEAPCOSERIES QSP 1 SILVER 2 GOLD 3

Value Line Standard Premium1000 1-01701210 1-04437260 1-63011310 1-0153 1-0153G1310 (wheel joint) 1-02971310/7260 2-31001310/1330 1-01341310/3R 3-31301310/1350 3-31401330 2-4800 2-4800G1330/7290 2-0355 2-0355G1330/3R 2-1569 2-1569G1330/1350 2-3050P55-55-675 2-4900 2-4900G3R 2-3011 2-3011G7290 2-1175 2-1175G1350 2-0053 2-0053G1350/3R 2-11531350/1410 2-14351355 2-13551410 2-0054 2-0054G1410/1480 3-14481415 3-04151480 3-0188 3-0188G1480 (wheel joint) 3-03321485 3-04861485 (wheel joint) 3-04851550 3-0155 3-0155G1610 4-0279Q 4-0279 4-0279GXL1610 Half Round 4-0674Q 4-0674 4-0674GXL1710 5-0280Q 5-0280 5-0280GXL1710 Half Round 6-0675Q 6-0675 6-0675GXL1760 6-0407Q 6-0407 6-0407GXL1760 Half Round 6-0677Q 6-0677 6-0677GXL1810 6-0281Q 6-0281 6-0281GXL1810 Half Round 6-0676Q 6-0676 6-0676GXL1810/9C 6-03241880 6-03081880/9C 6-0326SPL*90, SPL*100 4-1090SPL*170 6-1170SPL*250 6-1250

1 QSP - Quality Service Part 2 SILVER - Standard Universal Joint 3 GOLD - Premium Quality Universal Joint* SPL - Spicer® Life Series driveshafts is a registered trademark of Dana Limited

GOLD Heavy Duty Universal Joints Neapco® Premium Quality Universal Joints

• 1610 - 1810 Universal Joint Series

• Advanced Features in a Ten Series Universal Joint ThatOptimizes Performance & Product Life

• 100,000 Mile Lube Interval

• Covered by Neapco’s “Extended Warranty”

• Proven MERITOR® MXL™ design

• Backed by Neapco’s Superior Customer Service

2

4x4 Quick Reference

TABLE OF CONTENTS

Section Page NumberNEAPCO Premium Gold Series- Lube for Life Universal Joints

Inside Front Cover

Jeep 2007-2017 JK Long Slip High Angle Components

3-7

Dodge / Ram 4x4 Long Slip High Angle Components

8-9

Ford 4x4 Long Slip High Angle Components

10-11

Rock Crawler Driveshaft Components 12Special High Speed CV Conversion Flanges

13

Double Cardan CV Assemblies 14-17Unwelded Driveshaft Kits 18-21Neapco Silver Series- Lubeable Universal Joints

Inside Back Cover

3

4x4 Quick Reference

JEEP 2007-2017 JK Long Slip High Angle Components

DOUBLE CARDAN SPECIFICATIONS

DL Series

CV Head Style

Tubing Dia. And

WallButt Dia.

CL To Point

Of Weld

CL To CL Of Center Yoke

Pilot Dia.

Bolt Circle

Bolt Hole

Spacing Height

Bolt Hole

Spacing Width

Hole /Thread

SizeOverall Length

Joint Angle

Part Number

1310 Half Round

2.000 X.120

1.77 1.44 2.69 — — 2.34 1.50 0.31-24UNF

4.12 26 N912777G*

1350 Flange 2.000 X.120

1.77 1.44 2.88 3.12 4.25 — — 0.46 5.94 32 N921049G*

1350 Flange 2.500 X.095

2.32 1.44 2.88 3.12 4.25 — — 0.46 5.94 32 N921050G*

* Part numbers with G suffix have Gold Series lube-for-life universal joints

END YOKE SPECIFICATIONS

DL Series UJ RetentionSpline /

Number Teeth Hub Dia.Length

Through BoreCL To End Of

HubJoint Angle

PartNumber

1310HR CV 1.401-32 1.94 2.00 3.84 13 N2-4-JK03

1310HR U-Bolt 1.250-24 1.85 1.50 3.00 22 N2-4-JK06

1310HR U-Bolt 1.250-24 1.88 1.50 3.00 22 N2-4-JK02

1350HR U-Bolt 1.250-24 1.85 1.50 3.10 22 N3-4-JK08

1350HR U-Bolt 1.250-24 1.88 1.50 3.10 22 N3-4-JK04

SLIP YOKE SPECIFICATIONS

DL SeriesSpline /

Number TeethCL To End Of

SplineCL To Face

Washer Joint AngleLube Fitting Part Number Dust Cap

Part Number

1310 1.500-16 8.09 1.53 30 0641-B ND3K N2-3-6071KX

1350 1.500-16 8.44 1.78 35 0641-B ND3K N3-3-8081KX

STUB SHAFT SPECIFICATIONS

Spline / Number Teeth

Tubing Dia. And Wall Butt Dia.

Length Of Spline End Of Spline To Radius

End Of Spline To Weld

PartNumber

1.500-16 2.000X.120 1.77 6.53 7.70 8.76 N3-40-2012

1.500-16 2.500X.083 2.34 6.53 7.70 8.76 N3-40-2508

1.500-16 2.500X.095 2.32 6.53 7.70 8.76 N3-40-2509

COMPANION FLANGE SPECIFICATIONS

DL SeriesFlange Face

To EndHole/Thread

SizeHubDia.


Pilot Dia.

BoltCircle

Spline / Number

TeethPart

Number

1350 2.53 0.44-20 1.94 4 3.12-M 4.25 1.401-32 N3-1-JK05

1350 3.81 0.44-20 1.94 4 3.12-M 4.25 1.401-32 N3-1-JK07

4

4x4 Quick Reference

Front Shaft - 1310 SeriesAPPLICATION PART NO. PART TYPEJEEP JK 1310 FRONTLong Slip

N2-4-JK06 END YOKE1-0153G LUBE-FOR-LIFE

UNIVERSAL JOINTN2-3-6071KX SLIP YOKEN3-40-2012 STUB2.00X0.120 TUBEN912777G DOUBLE CARDAN CV HEADN2-4-JK03 END YOKE

N2-4-JK06

1-0153G

N2-3-6071KX

N3-40-2012

2.00X0.120

N912777GN2-4-JK03

5

4x4 Quick Reference

APPLICATION PART NO. PART TYPEJEEP JK 1310 REARLong Slip

N2-4-JK03 END YOKEN912747G DOUBLE CARDAN CV HEAD2.50X0.083 TUBEN3-40-2508 STUBN2-3-6071KX SLIP YOKE1-0153G LUBE-FOR-LIFE

UNIVERSAL JOINTN2-4-JK02 END YOKE

Rear Shaft - 1310 Series

N2-4-JK03

N912747G2.50X0.083

N3-40-2508

N2-3-6071KX

1-0153G

N2-4-JK02

6

4x4 Quick Reference

APPLICATION PART NO. PART TYPEJeep JK 1350 FRONTLong Slip

N3-4-JK08 END YOKE2-0053G LUBE-FOR-LIFE

UNIVERSAL JOINTN3-3-8081KX SLIP YOKEN3-40-2012 STUB2.00X0.120 TUBEN921049G DOUBLE CARDAN CV HEADN3-1-JK07 COMPANION FLANGE

Front Shaft - 1350 Series

N3-4-JK082-0053G

N3-3-8081KX

N3-40-2012

2.00X0.120

N921049GN3-1-JK07

7

4x4 Quick Reference

Rear Shaft - 1350 SeriesAPPLICATION PART NO. PART TYPEJEEP JK 1350 REARLong Slip

N3-1-JK05 COMPANION FLANGEN921050G DOUBLE CARDAN CV HEAD2.50X0.095 TUBEN3-40-2509 STUBN3-3-8081KX SLIP YOKE2-0053G LUBE-FOR-LIFE

UNIVERSAL JOINTN3-4-JK04 END YOKE

N3-1-JK05

N921050G2.50X0.095

N3-40-2509

N3-3-8081KX

2-0053G

N3-4-JK04

8

4x4 Quick Reference

DODGE/RAM 4x4 Long Slip High Angle Components


DL Series

CV Head Style

Tubing Dia. And Wall Butt

Dia.

CL To Point Of

Weld

CL To CL Of Center

Yoke Pilot Dia.

Bolt Circle

Hole/ Thread

SizeOverall Length

Joint Angle

PartNumber

1410 Flange 2.500 X.120 2.26 2.10 3.48 3.12 4.25 0.46 7.32 30 N924141HAG*


FLANGE YOKE SPECIFICATIONS

DL Series Pilot Dia. Bolt CircleHole /Thread

SizeFlange Face

To CLNumber Of Bolt Holes Joint Angle Part Number

1410 2.00-F 4.25 0.50 1.65 4 20 N3-2-1819


DL Series

Spline / Number

TeethCL To End Of

SplineCL To Face

Washer Joint AngleLube Fitting Part Number Dust Cap Part Number

1410 1.500-16 7.81 1.31 28 0641-B ND3A N3-3-508KX



Tubing Dia. And Wall Butt Diameter Length Of Spline


End Of Spline To Weld Part Number

1.500-16 2.500X.120 2.27 6.53 7.70 8.76 N3-40-2512

9

4x4 Quick Reference

APPLICATION PART NO. PART TYPERAM / DODGE 1410 FRONTLong Slip

N3-2-1819 FLANGE YOKE2-0054G LUBE-FOR-LIFE

UNIVERSAL JOINTN3-3-508KX SLIP YOKEND3K SEALN3-40-2512 STUB2.50X0.120 TUBEN924141HAG DOUBLE CARDAN CV HEAD

N3-2-1819

2-0054G

N3-3-508KX

ND3K

N924141HAGN3-40-2512

2.50X0.120


10

4x4 Quick Reference

FORD 4x4 ComponentsLong Slip High Angle Components


DL Series

CV Head Style

Tubing Dia. And Wall Butt

Dia.

CL To Point Of

Weld

CL To CL Of Center

Yoke Pilot Dia.

Bolt Circle

Hole/ Thread

SizeOverall Length

Joint Angle

PartNumber

1410 Flange 2.500 X.120 2.26 2.10 3.48 2.68 4.25 0.50 7.32 30 N924143HAG*



DL Series Pilot Dia. Bolt CircleHole /Thread

SizeFlange Face

To CLNumber Of Bolt Holes Joint Angle Part Number

1410 2.95-F 4.75 0.50 2.00 4 25 N3-2-1839


DL Series

Spline / Number

TeethCL To End Of

SplineCL To Face

Washer Joint AngleLube Fitting Part Number Dust Cap Part Number

1410 1.500-16 7.81 1.31 28 0641-B ND3A N3-3-508KX



Tubing Dia. And Wall Butt Diameter Length Of Spline


End Of Spline To Weld Part Number

1.500-16 2.500X.120 2.27 6.53 7.70 8.76 N3-40-2512

11

4x4 Quick Reference

APPLICATION PART NO. PART TYPEFORD 1410 FRONTLong Slip

N3-2-1839 FLANGE YOKE2-0054G LUBE-FOR-LIFE

UNIVERSAL JOINTN3-3-508KX SLIP YOKEND3K SEALN3-40-2512 STUB2.50X0.120 TUBEN924143HAG DOUBLE CARDAN CV HEAD

N924143HAG

2.50X0.120

N3-40-2512


ND3K

N3-3-508KX

2-0054G

N3-2-1839

12

4x4 Quick Reference

Rock Crawler Driveshaft Assembly Components

20 Inch Extreme Length Slip

For Off Road Applications OnlyThis driveline assembly provides the driveline specialist a solution for the off road rock crawlers that require a long slip driveshaft due to high lift kits and extreme suspension travel.

1310 Series Assembly Components Listing

Part No. Part Description2231-3 Long Spline Stub Shaft 1.625 – 10 spline

(Overall Length 27.88” Spline Length 25.5” )53-2415 Sleeve

Note: 53-2415 sleeve must be turned down to accept 2.00” x .120 tubingN2-4-803-1 End yoke (weld, 1.375 bore blank)

N2-28-1757 1 Tube Weld Yoke 2.00 x .120

N16-30-102-72 2.00X0.120 Tubing

1 If a Double Cardan CV is desired use N912777 in place of the N2-28-1757 tube weld yoke.

13

4x4 Quick Reference

Special Conversion FlangesDOUBLE CARDAN CV FLANGE YOKE SPECIFICATIONS

DL Series Pilot Dia. Bolt Circle Hole/Thread

Size


Flange Face To CL

Part Number

1310HR 3.94-M 3.39 0.32 6 2.91 N2-83-206


DL Series Pilot Dia. Bolt Circle Hole/Thread

Size

Flange Face To CL



1310 3.92-M 3.39 0.32 2.31 8 20 N2-2-392

1310 3.94-M 3.39 0.32 2.19 6 20 N2-2-206

Application Summary: 1310 Series Dakota, Durango, Cherokee Conversion - High Speed CV to Double Cardan

N2-83-206

N2-2-392

N2-2-206

Application Summary: 1310 Series Jeep JK Conversion - High Speed CV joint with 8 bolts on rear driveshafts to Cardan Joint

Application Summary: 1310 Series Dakota, Durango, Cherokee Conversion - High Speed CV to Double Cardan

14

4x4 Quick ReferenceDOUBLE CARDAN C.V. HEAD ASSEMBLY - DIAGRAMS

15

4x4 Quick ReferenceDOUBLE CARDAN C.V. HEAD ASSEMBLY

* Part numbers with G suffix have Gold Series lube-for-life universal joints.

A

DL Series

DC Head Style


FlangePilot Dia.

FlangeBolt

Circle

Bolt Hole Spac-

ing Height

Overall Length

Joint Angle

CommonApplications

Part Number


X.1202.00 3.50 — 5.75 26 Ford - Front N913877

1310 Flange 2.000 X.120

2.00 3.50 — 5.75 26 Ford - Front N913877G*

1310 Flange 2.500 X.083

2.00 3.50 — 5.75 26 Ford - Front N919279

1310 Flange 2.500 X.083

2.00 3.50 — 5.75 26 Ford - Front N919279G*

1310 Flange Stub

2.000 X.120

2.00 3.00 — 12.12 26 GM - Front N913601

1310 Flange Stub

2.000 X.120

2.00 3.00 — 12.12 26 GM - Front N913601G*

1310 Flange Stub

3.000 X.083

2.00 3.00 — 12.12 26 GM - Front N913600

1310 Half Round

2.000 X.120

— — 2.34 4.12 26 Jeep N912777

1310 Half Round

2.000 X.120

— — 2.34 4.12 26 Jeep N912777G*

1310 Half Round

2.500 X.083

— — 2.34 4.12 26 Dodge, GM, Jeep N912747

1310 Half Round

2.500 X.083

— — 2.34 4.12 26 Dodge, GM, Jeep N912747G*

1310 Half Round

3.000 X.083

— — 2.34 4.12 26 Dodge, GM, Jeep N912937

1310 Half Round

3.000 X.083

— — 2.34 4.12 26 Dodge, GM, Jeep N912937G*


Round2.000 X.120

— — 2.88 4.12 18 Dodge, Ford - Front N910810

1330 Half Round

2.500 X.083


1330 Half Round

2.500 X.083

— — 2.88 4.12 18 Dodge, Ford - Front N910811G*

1330 Half Round

3.000 X.065


16

4x4 Quick ReferenceDOUBLE CARDAN C.V. HEAD ASSEMBLY - DIAGRAMS

17

4x4 Quick ReferenceDOUBLE CARDAN C.V. HEAD ASSEMBLY (Cont’d)

* Part numbers with G suffix have Gold Series lube-for-life universal joints.

A

DL Series

DC Head Style


FlangePilot Dia.

FlangeBolt

Circle

Bolt Hole Spac-

ing Height

Overall Length

Joint Angle

CommonApplications

Part Number


X.1202.00 4.25 — 5.94 32 Ford - Front N921048G*

1350 Flange 2.000 X.120

3.12 4.25 — 5.94 32 Dodge, GM N921049

1350 Flange 2.000 X.120

3.12 4.25 — 5.94 32 Dodge, GM N921049G*

1350 Flange 2.500 X.095

2.16 3.94 — 5.94 32 Jeep - Front N921056

1350 Flange 2.500 X.095

2.16 3.94 — 5.94 32 Jeep - Front N921056G*

1350 Flange 2.500 X.095

3.12 4.25 — 5.94 32 Dodge - Front N921050

1350 Flange 2.500 X.095

3.12 4.25 — 5.94 32 Dodge - Front N921050G*

1350 Flange 2.750 X.083

2.00 4.25 — 5.97 32 Ford - Front N921052

1350 Flange 2.750 X.083

2.00 4.25 — 5.97 32 Ford - Front N921052G*

1350 Flange 3.000 X.083

2.00 4.25 — 5.97 32 Ford - Front N921053

1350 Flange 3.000 X.083

2.00 4.25 — 5.97 32 Ford - Front N921053G*

1350 Flange 3.500 X.083

2.68 4.25 — 6.00 32 Ford - Rear N921054

1350 Flange 3.500 X.083

2.68 4.25 — 6.00 32 Ford - Rear N921054G*


X.1203.12 4.25 — 7.32 22 Ram - Front N924141G*

1410 Flange 2.500 X.120

3.12 4.25 — 7.32 30 Ram - Front N924141HAG*

1410 Flange 2.750X.083

2.68 4.25 — 7.70 30 Ford - Front N924142HAG*

1410 Flange 2.500 X.120

2.68 4.25 — 7.32 30 Ford - Front N924143HAG*

18

4x4 Quick ReferenceDRIVE SHAFT - DIAGRAMS

19

4x4 Quick ReferenceUNWELDED DRIVE SHAFT KITS

A A

DL Series

Driveshaft Style

Tube Size

Maximum Extended

Length

Com-pressed Length

Double Cardan CV

HeadUniversal

Joint Part Number


CV-72.000 X.120

45.94 42.84 N912777 1-0153/1-0154

N909365-2600

1310 Unwelded CV-7

2.500 X.083

48.32 44.19 N912747 1-0153/1-0154

N909363-2600

1310 Unwelded CV-7

2.500 X.083

48.32 44.19 N912747G* 1-0153G N909363G-2600

1310/1350 Series1310/ 1350

Unwelded CV-8

2.000 X.120

37.38 34.28 N921049 1-0153/2-0052

S91397-2000


CV-72.500 X.083

42.91 38.75 N910811 2-4900/2-4801

N911818-2600

1330/1350 Series1330/ 1350

Unwelded CV-8

2.500 X.095

36.02 33.35 N921056 2-4800/2-0052

N921056X-2000

1330/ 1350

Unwelded CV-8

2.500 X.095

38.06 35.18 N921050 2-4800/2-0052

N921050-2000


CV-142.500 X.095

36.95 35.45 N921050G* 2-0053G N921050G-2010

1350 Unwelded CV-8

2.500 X.095

38.06 35.18 N921050 2-0053/2-0052

N921050-2007

1350 Unwelded CV-8

2.750 X.083

48.34 44.5 N921052 2-0053/2-0052

N921052-3000

1350 Unwelded CV-8

2.750 X.083

48.34 44.5 N921052G* 2-0053G N921052G-3000

1350 Unwelded CV-8

3.500 X.083

66.16 62.91 N921054 2-0053/2-0052

N921054-4800


CV-142.500 X.120

37.55 36.05 N924141G* 2-0054G N924141G-2013

1410/1350 Series1410/ 1350

Unwelded CV-8

3.500 X.083

66.7 63.26 N921054 2-0054/2-0052

N921054-4801

20

4x4 Quick ReferenceDRIVE SHAFT - DIAGRAMS

21

4x4 Quick ReferenceUNWELDED DRIVE SHAFT KITS (Cont’d)

A A

DL Series

Driveshaft Style

Tube Size

Maximum Extended

Length

Com-pressed Length

Double Cardan CV

HeadUniversal

Joint Part Number

3R Series3R Unwelded-4 2.750

X.06532.56 29.44 — 2-3011 S91397-2003

3R/1310 Series3R/

1310Unwelded-9 2.000

X.12043.81 — N913601 3-3130/

1-0154N131138-3000

3R/1350 Series3R/

1350Unwelded

CV-82.500 X.095

37.94 35.44 N921050 2-3011/2-0052

N921050-2003

7260/1350 Series7260/ 1350

Unwelded CV-8

2.000 X.120

37.38 33.95 N921049 1-6301/2-0052

S91397-2001

7290/1350 Series7290/ 1350

Unwelded CV-8

2.000 X.120

37.06 34.12 N921049 2-1175/2-0052

S91397-2002

POWER TAKE-OFF DRIVELINE PRODUCTS CATALOG

Welcome to Neapco Power Take-Off (P.T.O.) Driveline Products Catalog. The goal ofthis publication is to provide trouble free identification of a sometimes complex and/orunfamiliar product line. In this issue there are improvements in the series information,a major consolidation of Category I series, and an entirely new Auxiliary P.T.O. section.Our plan is to expand the coverage of this catalog in future issues while continuing toimprove the content from a user’s perspective.

There are five (5) major areas of interest (sections) in this book.

GENERAL INFORMATION – Contains important introductory information including“How To Use This Catalog”, identification, maintenance, lubrication details and more.

STANDARD SERIES – Features domestic (primarily North American) design Agricul-tural P.T.O. driveline products dimensioned in inches.

METRIC SERIES – Covers both Tri-lobe and Lemon-shape European-style AgriculturalP.T.O. driveline products with metric dimensions.

AUXILIARY P.T.O. – Focused products for truck mounted and industrial power take offapplications with Neapco’s exclusive Safety Shielding System.

INTERCHANGE – Part number interchange to key competitor product lines for easyreference.

4

3

2

1

0

(¹⁵⁄₁₆") 1-0170

1-1475 (³¹⁄₃₂")

(1") 1-1875

1-1275 (1¹⁄₁₆")

(1¹⁄₈") 1-2075

2-2275 (1¹⁄₄")

(1⁵⁄₁₆") 3-0044

3-0188 (1³⁄₈")

(1¹⁷⁄₃₂") 3-0045

(³⁵⁄₆₄")1-1475, 1-0170

(³⁷⁄₆₄")1-1875

(⁴¹⁄₆₄")1-1275

(1¹⁄₆₄")3-0045

(⁵⁷⁄₆₄")3-0188

(²³⁄₃₂")1-2075

(²⁷⁄₃₂")2-22753-0044

(4¹⁄₆₄") 3-0045(3⁷⁄₈") 3-0188

(3³⁄₄") 3-0044

(2¹⁵⁄₁₆") 2-2275(2⁷⁄₈") 1-1875

(2¹³⁄₃₂") 1-2075

(2⁵⁄₁₆")1-1275

(2¹⁄₁₆")1-0170

(1³¹⁄₃₂")1-1475

J.L. (JOURNAL LENGTH WITH BEARINGS REMOVED) B.D. (BEARING DIAMETER)

J.D. (JOURNAL DIAMETER)

TABLE OF CONTENTSWarranty . . . . . . . . . . 1How to Read Catalog . . . . . . . 2-3Selection of Proper Series. . . . . . 3Identification of Series L600-N1000 . . . 3Driveshaft Safety Information . . . . . 4-5Maintenance and Lubrication Instructions . 6Competitor Interchangeability Chart . . . 7-8

Standard Series. . . . . . . . 7Metric Series . . . . . . . . 8

Cross and Bearing Kit Specification:Standard and Metric . . . . . . 9

Standard Series Listings . . . . . 10-59AG Rack . . . . . . . . 10-11L600 Series . . . . . . . 12-16N1000 Series . . . . . . . 17-241200 Series . . . . . . . 25-311800 Series . . . . . . . 32-362000 Series . . . . . . . 37-412200 Series . . . . . . . 42-48

2200 Series CV . . . . . 47-48N44 Series . . . . . . . 49-53

N44 Series CV . . . . . 52-532600 Series . . . . . . . 54-56N55 Series . . . . . . . 57-59

World ShieldTM / Shield Bearing Kits . . . 60Q.D. Repair Kits . . . . . . . . 61

Old Style Replacement Shield Components . 61Hanger Bearings, Pillow Block Bearings

and Set Screws . . . . . . . 62Square, Step and Woodruff Keys . . . . 63Shafting and Tubing . . . . . . .64-65Metric Series Listings . . . . . . 66-96

Metric AG Rack . . . . . . . 66-671 Series (Bondioli & Pavesi) . . . 68-692 Series (Bondioli & Pavesi) . . . 70-713 Series (Bondioli & Pavesi) . . . 72-734 Series (Bondioli & Pavesi) . . . 74-755 Series (Bondioli & Pavesi) . . . 76-776 Series (Bondioli & Pavesi) . . . 78-797 Series (Bondioli & Pavesi) . . . 80-818 Series (Bondioli & Pavesi) . . . 82-839 Series (Bondioli & Pavesi) . . . . 8410 Series (Bondioli & Pavesi) . . . . 842100 Series (Walterscheid) . . . 85-862200 Series (Walterscheid) . . . 87-881 Series (Walterscheid) . . . 89-902300 Series (Walterscheid) . . . 91-922400 Series (Walterscheid) . . . 93-942500 Series (Walterscheid) . . . 95-96

Auxiliary PTO Driveshafts & Components 97-127Companion Flanges . . . . . . 121-122Interchange . . . . . . . . 128-138

1

HOW TO READ THIS CATALOG


BY SERIES—Locate the replacement component

Each yoke and/or component lists the appropriate dimensionalinformation needed to match your replacement component tothe appropriate part number.

1st KNOW YOUR SERIES

Neapco offers several methods to identify the series of thereplacement component; use this information to identify theNeapco series:

1.) Interchange by competitor part number (Pages 128-138)2.) Dimensional check (Page 9)3.) Size comparison templates for standard series only

(Inside Back cover)

Shield systems are available and their use is required for eachseries. C.V. joints, clutches, and other special add-oncomponents are located in each available series. Serviceparts for shields, Q.D. yokes, and other hardware are locatedin the back of the catalog. (See Table of Contents.)

2

ABBREVIATIONSMax. MaximumMin. Minimummm MillimetersMP Male PilotN/A Not AvailableNo. NumberNPT National Pipe TapO.D. Outside Diameterpc. PiecePTO Power Take-OffQ.D. Quick DisconnectRD RoundRECT RectangularRPM Revolutions per minuteSPL SplineSQ Square

ASAE American Society of Agricultural Engineers

BC Bolt CircleBrg. BearingL CenterlineC.V. Constant VelocityD.T. Drill ThruDBL DoubleDia. DiameterDim. DimensionDist. DistanceGA GaugeHEX HexagonHP HorsepowerI.D. Inside Diameterin. InchesLoc. Location

Set Screw or Pin HoleKeyway Distance Part

Bore Length Width Location Hole Size Location to End Number

⁵⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ⁵⁄₈" 10-4373

³⁄₄" 1¹¹⁄₁₆" ³⁄₁₆" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-4693

c



In order to select the correct series PTO universal joint to satisfy your needs, you needonly answer three (3) simple questions.

1. What size is the yoke? Measure thesize of the hole in the ear section, anddetermine the lock-up type.

2. What are the bore and keyway sizes? Keyway locations? What typeof bore: square, rectangular, spline?

3. What is the length of the yoke?

Identification of Series

L600-N1000There are three major Category 1 PTO series: Neapco, Rockwell, and Dana/Spicer.We have a complete range of components for the L6 and 1000 series. Our yokeshave identification chamfers and marks in the critical fit dimension areas. Use theproper universal joint kit for the respective series.

Round Spline Square Hexagon

OutsideLockup

Ear Hole

InsideLockup

Ear Hole

Outside Lockup Inside Lockup

L

1.45

BroachedGoove

L600 N1000

.969

1.50

.937

Notch

3

DangerRotating Driveline

Applicable safety standards require awarning label be affixed to the outer sectionof the driveline safety shield, to remind theoperator that it should not be in operationuntil the following conditions have beenmet.

1. All Driveline, Tractor and EquipmentShields are in place

2. The Driveline is properly and securelyattached at both ends.

3. The Driveline Shields turn freely. Anydeviation from this standard could resultin a serious injury or death.

The label, part number NA-7232, shouldbe affixed to the outer shield with the topone (1") inch from the bell as shown in thediagram below.

Note: Applicable safety standardsrequire that all drivelines beshielded with legible label in place.When maintaining and repairingPTO drivelines, use thedesignated label part numbers topurchase replacements.

SAFETY INFORMATION

SAFETY INFORMATION

READ CAREFULLY and ADHERE TO

Part NumberNA-7232

Unguarded portion ofPTO must be shieldedby tractor mastershield.

Unguarded portion ofPTO must be shieldedby implement shieldfurnished by equip-ment manufacturer.

4

DangerGuard Missing

DO NOT OPERATEApplicable safety standards require theuse of warning labels on the driveshaftwhen the safety shields have beenremoved. We recommend that label partnumber NA-10666 be adhered to the tubeend of the driveshaft, one (1") inch fromthe edge of the yoke, with the side of thelabel toward the yoke. (See diagrambelow) At this point, the label will bereadily visible at all times.

Serious injury or even death can result byoperating equipment without the propersafety shield in place. DO NOT operateyour equipment without safety shieldsbeing installed on the driveshaft.

Note: A high percentage of alldriveline injuries occur when safetyshielding is missing or notfunctional. It is necessary for theuser to maintain proper shieldingand safety labels on the drivelines.

SAFETY INFORMATION

SAFETY INFORMATION


Part NumberNA-10666

5

6

Lubricants for Universal Joints and Slip SleevesUse only a good quality lithium soap base E.P. grease meeting or exceeding N.L.G.I. grade 2 specifications. Thissame grease may also be used for shield bearing grooves and Q.D. pin lubrication.

*MaintenanceAfter prolonged periods of disuse such as off-season storage, inspect as follows.

1. Shielding for damage and freedom of rotation2. Legibility of shield warning decal3. Lubrication:

Carefully adhere to applicable lubrication instructions4. PTO end connections:

Check that both the tractor and implement end connections have been made properly and are securelylocked

5. Safety Precautions:Use only shielded drivelines and make sure tractor master shield and implement PTO shield are in placeand cover driveline end connections.

6. Insure shaft and shield labels are in place. (Refer to pages 4 and 5 for proper location)

*It is recommended that this inspection be performed before each use of machine.

Shield Bearing Shield Bearing

Q.D. Pins & Collars

Cross andBearing Kit

Cross andBearing Kit

Minimum Recommended Lubrication Schedule

20 hrs.

40 hrs.

8 hrs.

40 hrs.

8 hrs.

40 hrs.

Sleeve

Maintenance and LubricationInstructions for PTO Driveline

7

SupplierASAE HP @ HP @ Walterscheid

540 RPM 1000 RPM Neapco AgMaster G & G Rockwell Weasler

Standard Series

Series N1000 1000Kit No. 1-0170 5-170X

Series L600 6N L6N 6Kit No. 1-1475 302-0600 CPL6R-40 200-0600

Series 1200 1140 12N L12N 12Kit No. 1-1275 5-242X 302-1200 CPL12R 200-1200

Series 1800 1800Kit No. 1-1875 200-1875

Series 2000 1240 14N L14N 14Kit No. 1-2075 5-129X 302-1400 CPL14R 200-1400

Series 2200 1340 35N 35N 35Kit No. 2-2275 5-243X 302-3500 CP35R 200-3500

Series N44 44R 44R 44Kit No. 3-0044 302-4400 CP44R 200-4400

Series 2600 1480 2600Kit No. 3-0188 5-188x 200-2600

Series N55 5N 55N 55Kit No. 3-0045 302-5500 CP55N 200-5500

1 16 30

1 16 30

2 25 48

3 35 48

3 35 56

4 58 93

5 80 120

6 100 150

6 100 150

SupplierASAE Walterscheid

Category Number Neapco Precision Rockwell Spicer AgMaster Weasler1 Series N1000 1500/1700 10N 1000 1000

1 Series L600 1900 L6N 6

2 Series 1200 1200 L12N 1140 1140 12

3 Series 1800 1800

3 Series 2000 1300 L14N 1240 1240 14

4 Series 2200 1800 L16S/3N/35N 1340 1340 35

5 Series N44 1400 44R 1440 1440 44

6 Series 2600 1480 1480 2600

6 Series N55 1100 55N 55

IMPORTANT NOTICE

The data listed above is correct to the best of our knowledge, having beencompiled from sources of information which we believe to be reliable.However, we cannot assume any responsibility for possible error.

COMPETITOR INTERCHANGEABILITY CHART

8

Metric SeriesASAE Supplier

Category Number Neapco Bondioli & Pavesi Walterscheid Weasler

IMPORTANT NOTICE

The data listed above is correct to the best of our knowledge, having beencompiled from sources of information which we believe to be reliable.However, we cannot assume any responsibility for possible error.

1

1

2

2

3

3

3

3

4

4

5

5

5

6

Series 1 1Kit No. 1-0121 1.41 200-6154

Series 2100 2100Kit No. 1-1001 10.01.00 200-7155

Series 2 2Kit No. 1-0221 2.41 200-8261

Series 2200 2200Kit No. 1-0221 20.00.00 200-8261

Series 3 3Kit No. 1-0321 3.41 200-8370

Series I IKit No. 1-0321 11.03.00 200-8370

Series 2300 2300Kit No. 1-0421 21.00.00 200-8474

Series 4 4Kit No. 1-0421 4.41 200-8474

Series 5 5Kit No. 2-0521 5.41 200-6580

Series 2400 2400Kit No. 2-2421 35.00.00 200-7676

Series 6 6Kit No. 3-0621 6.41 200-8692

Series 2500 2500Kit No. 3-2521 36.00.00 200-7989

Series 7 7Kit No. 3-0721 7.81 200-6794

Series 8 8Kit No. 3-0821 8.41 200-6806

Series 9 9Kit No. 3-0921 9.81

Series 10 10Kit No. 3-1021 10.41

COMPETITOR INTERCHANGEABILITY CHART

9

Standard SeriesBearing Lock-Up Overall Journal Journal Neapco Page PartDiameter Dimension Length Length Diameter Type Series Number Number

³¹⁄₃₂" 1²⁹⁄₆₄" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 L600 12 1-0616

³¹⁄₃₂" 1²⁹⁄₆₄" 2⁵⁄₁₆" 1³¹⁄₃₂" ³⁵⁄₆₄" 1 L600 12 1-1475

¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 N1000 17 1-0170

¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 N1000 17 1-0171

¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 N1000 17 1-0172

1¹⁄₁₆" 1¹³⁄₁₆" 2⁹⁄₁₆" 2⁵⁄₁₆" ⁴¹⁄₆₄" 1 1200 25 1-1275

1" 2¹¹⁄₃₂" 3¹⁄₈" 2⁷⁄₈" ³⁷⁄₆₄" 1 1800 32 1-1875

1¹⁄₈" 2⁵⁄₈" 2⁵⁄₈" 2¹³⁄₃₂" ²³⁄₃₂" 2 2000 37 1-2075

1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2¹⁵⁄₁₆" ²⁷⁄₃₂" 2 2200 42 2-2275

1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2¹⁵⁄₁₆" ²⁷⁄₃₂" 2 2200 42 2-2276

1⁵⁄₁₆" 2⁵¹⁄₆₄" 4¹⁄₃₂" 3³⁄₄" ²⁷⁄₃₂" 1 44 49 3-0044

1³⁄₈" 4³⁄₁₆" 4³⁄₁₆" 3⁷⁄₈" ⁵⁷⁄₆₄" 2 2600 54 3-0188

1¹⁷⁄₃₂" 4⁵⁄₁₆" 4⁵⁄₁₆" 4¹⁄₆₄" 1¹⁄₆₄" 2 55 57 3-0045

Metric Series: All Type 2

22.0(.866) 54.0(2.126) Bondioli & Pavesi 1 68 1-0121

22.0(.866) 55.0(2.165) Walterscheid 2100 85 1-1001

23.8(.937) 61.3(2.413) 1-0221

27.0(1.063) 70.0(2.756) 1-0321

27.0(1.063) 74.6(2.937) 1-0421

30.2(1.188) 80.0(3.150) Bondioli & Pavesi 5 76 2-0521

32.0(1.260) 76.0(2.992) Walterscheid 2400 93 2-2421

30.2(1.188) 92.0(3.622) Bondioli & Pavesi 6 78 3-0621

36.0(1.417) 89.0(3.500) Walterscheid 2500 95 3-2521

35.0(1.377) 94.0(3.700) Bondioli & Pavesi 7 80 3-0721

35.0(1.377) 106.5(4.193) Bondioli & Pavesi 8 82 3-0821

41.0(1.614) 108.0(4.250) Bondioli & Pavesi 9 84 3-0921

41.0(1.614) 118.0(4.646) Bondioli & Pavesi 10 84 3-1021

{{{

OverallLength

Brg.Dia.

JournalLength

JournalDia.

Bearing OverallDiameter Length Page Partmm(in.) mm(in.) Style Series Number Number

}}}

✝ Non-Greasable. ✝✝ Greasable thru one (1) bearing. � Greasable thru two (2) bearings.

Type 1(Snap Ring Grooves

in Bearings)

Type 2(Snap Ring Grooves

in Yokes)

Bondioli & Pavesi 2 70Walterscheid 2200 87

Bondioli & Pavesi 3 72Walterscheid I 89

Bondioli & Pavesi 4 74Walterscheid 2300 91

✝

✝✝

�

CROSS AND BEARING KITS

10

Series Quantity Part Number

Cross & Bearing Kits

L600 6 1-14751200 8 1-12752000 8 1-20752200 8 2-2275

Quick Disconnect Yokes

L600 6 Spline 4 16-6409-ARL600 21 Spline 1 16-0621-AR1200 6 Spline 4 12-1190-AR1200 21 Spline 1 12-1193-AR2000 6 Spline 4 20-9309-AR2000 21 Spline 2 20-9325-AR2200 6 Spline 3 22-2312-AR2200 21 Spline 1 22-2317-AR

Series Description Quantity Part Number

STANDARD AG RACKFor additional shaft and shield safetylabels, please refer to pages 4 and 5.

Shield Safety labelPart Number NA-7232

Shaft Safety labelPart Number NA-10666

Services Popular Traditional North American Drivelines

11



Retrofit Shield Kits(Includes Shield Bearings)

L600 1 69-0640-AR1200, 2000 1 69-1240-AR2200 1 69-2240-AR

1³⁄₁₆" Shaft 1 73-1188³⁄₄" X ⁷⁄₈" Shaft 2 73-0750

1" X 1 ¹⁄₈" Shaft 2 73-10011" X 1¹⁄₈" Tube 2 70-1001

1¹⁄₄" X 1³⁄₈" Tube 2 70-12502" X 14GA(.083) Tube 1 70-2000

2¹⁄₈" X 11GA(.120) Tube 1 70-2125

PTO Series Identifier 1 99-0001-AR

Shaft & Tube Selection - 72" lengths(Included with Full Assortment Only)

Shaft Weld Yokes

L600 2 16-6129-AR1200 2 12-1340-AR2000 2 20-9126-AR2200 1 22-1344-AR

L600 2 16-6131-AR1200 2 12-1318-AR2000 2 20-9131-AR2200 1 22-1325-AR

Tube Weld Yokes

Sleeves2000 1 53-2034-AR2200 1 53-2435-AR

Half ShaftsL600 Yoke & Shaft 1 65-1639-ARL600 Yoke & Tube 1 64-1639-AR1200 Yoke & Shaft 1 65-2839-AR1200 Yoke & Tube 1 64-2739-AR2000 Yoke & Shaft 1 65-2840-AR2000 Yoke, Tube & Sleeve 1 64-2740-AR2200 Yoke & Shaft 1 65-2639-AR2200 Yoke, Tube & Sleeve 1 64-2539-AR

L600 ³⁄₄" Rd. Bore 1 16-6111-ARL600 ⁷⁄₈" Rd. Bore 1 16-6213-ARL600 ¹⁵⁄₁₆" Rd. Bore 1 16-6114-ARL600 1" Rd. Bore 4 16-6215-ARL600 1¹⁄₈" Rd. Bore 1 16-6216-ARL600 1¹⁄₄" Rd. Bore 2 16-6218-AR1200 1" Rd. Bore 4 12-1115-AR1200 1¹⁄₈" Rd. Bore 2 12-1326-AR1200 1¹⁄₄" Rd. Bore 2 12-1176-AR1200 1³⁄₈" Rd. Bore 1 12-1120-AR2000 1" Rd. Bore 1 20-9115-AR2000 1¹⁄₈" Rd. Bore 2 20-9117-AR2000 1¹⁄₄" Rd. Bore 2 20-9119-AR2000 1³⁄₈" Rd. Bore 2 20-9120-AR2200 1¹⁄₈" Rd. Bore 1 22-1132-AR2200 1¹⁄₄" Rd. Bore 2 22-1218-AR2200 1³⁄₈" Rd. Bore 2 22-1219-AR2200 1⁷⁄₁₆" Rd. Bore 1 22-1178-AR2200 1¹⁄₂" Rd. Bore 2 22-1120-AR

End Yokes

AG Rack (Full Assortment) 99-0192AG Rack (Limited Assortment) 99-0191AG Rack and Hardware Only 99-0190

Complete Displays

STANDARD AG RACKServices Popular Traditional North American Drivelines

12

L600 SERIESReplaces Rockwell® L6 Series - Replaces Weasler® 6 Series

Lock-Up OverallBearing Dia. Dim. Length Part Number

³¹⁄₃₂" 1²⁹⁄₆₄" 2⁵⁄₁₆" 1-1475

2⁵⁄₁₆" 1-0616*

*Conversion Kit: 1000 to L600

Cross and Bearing Kit: Inside Lock-Up

Tractor Yokes: Quick DisconnectPin Type Q.D.

(L) Pin Repair KitBore Length Part Number Part Number

1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 16-6409

1³⁄₈"-21 SPL 3⁹⁄₁₆" 56-1857 16-0621

Note: Tractor end use only

Lawn and Garden YokeSlide Collar Q.D.

(L) Collar Repair KitBore Length Part Number Part Number

1"-15 SPL 2¹³⁄₁₆" 56-0615 16-0615

¹⁵⁄₁₆" 1³¹⁄₆₄"³¹⁄₃₂" 1²⁹⁄₆₄"

Collar Type Q.D.(L) Collar Repair Kit

Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹⁄₁₆" 56-3001 16-0606

1²⁹⁄₆₄" 2⁵⁄₁₆"

³¹⁄₃₂"

L

L

L

w

�

ASAECategory 1

13

(L)Stub Length Part Number

Lawn and Garden YokeStub Yoke

L

⁵⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6210

³⁄₄" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6111

¹³⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6112

⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6213

¹⁵⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6114

1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6215

1¹⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6216

1³⁄₁₆" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6217

1¹⁄₄" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6218

Round

Set Screw(L) Keyway Dist. Part

Bore Length Width Loc. Hole Size Loc. to End Number

Round-Double Keyway

⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6213

1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6215

1¹⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6216

1³⁄₁₆" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6217

1¹⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6218

³⁄₁₆" GAP¹⁄₄" GAP

³⁄₁₆" GAP¹⁄₄" GAP

¹⁄₄" GAP⁵⁄₁₆" GAP

¹⁄₄" GAP⁵⁄₁₆" GAP

¹⁄₄" GAP⁵⁄₁₆" GAP

L

L



1"-15 SPL 5³⁄₈" 16-1615

Implement YokesPin Type Q.D.


1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 16-6407

Note: Implement end use onlyL

L600 SERIESReplaces Rockwell® L6 Series - Replaces Weasler® 6 Series

14

L600 SERIESImplement Yokes

1" RD 2³⁄₄" ¹³⁄₃₂" ⁷⁄₁₆" 16-6616*

*Also has ¹⁄₄" keyway and set screw hole

Clamp(L) Drill Thru

Bore Length Hole Size Bolt Fit Part Number

Drill Thru(L) Distance

Bore Length Hole Size Loc. to End Part Number

1" 2¹⁄₂" ²⁵⁄₆₄" GAP ⁵⁄₈" 16-6516

1¹⁄₈" 2¹⁄₂" ²⁵⁄₆₄" GAP ⁵⁄₈" 16-6518

1¹⁄₄" 2¹⁄₂" ²⁵⁄₆₄" GAP ⁵⁄₈" 16-6165

Shear



1¹⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" EAR ⁵⁄₈" 16-6134

1³⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" EAR ³⁄₈" 16-6187

Spline

Set Screw(L) Distance


³⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6171

⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6302

⁷⁄₈" X 1"* 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6302

1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6302

1¹⁄₈" 2¹⁄₂" — — — 16-6138

1¹⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6127

*Double Square

Square

L

L

L

L



⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 GAP ⁵⁄₈" 16-6303

Hexagon

L

Replaces Rockwell® L6 Series - Replaces Weasler® 6 Series

15

L600 SERIES

SquareSet Screw

(L) DistanceBore Length Hole Size Loc. to End Part Number

³⁄₄" 5¹⁄₂" ¹⁄₈" NPT GAP 2" 16-6176

⁷⁄₈" 5¹⁄₂" (2)¹⁄₈" NPT GAP 2" 16-6178

Implement Slip Yokes

Double Pivot Yoke(L) Maximum

L to L Static Angle Operating Angle Part Number

2¹⁄₂" 20O 18O 16-8600

c c

L

L

Shaft Weld Yoke(L) Use W/Shaft

Bore Length Part Number Part Number³⁄₄" X ⁷⁄₈" 2¹⁄₂" 73-0750 16-7600*

³⁄₄" X ⁷⁄₈" 2¹⁄₂" 73-0750 16-6129**

Shield Brg. Groove Style: *0600 **L600L

Tube Weld Yoke(L) Use W/Tube

Bore Length Part Number For Tube Part Number1" X 1¹⁄₈" 2³⁄₄" 70-1001 1 X 1¹⁄₈" 16-3600*

1" X 1¹⁄₈" 2³⁄₄" 70-1001 1" X 1¹⁄₈" 16-6131**

1³⁄₁₆" RD 3" 70-1625 1⁵⁄₈" X 16GA 16-6132*

Shield Brg. Groove Style: *0600 **L600

L

Rectangular and Round Tube(L) Wall Use W/Weld

O.D. Length Thickness Yoke Number Part Number

1" X 1¹⁄₈" 72" .125 16-3600 70-1001

1" X 1¹⁄₈" 72" .125 16-6131 70-1001

1⁵⁄₈" RD 72" .065 (16GA) 16-6132 70-1625

L


16

L600 SERIES

(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number

Slip Sleeve

³⁄₄" X ⁷⁄₈" 4" NO 1⁵⁄₈" X .065(16GA) — 53-0635

³⁄₄" X ⁷⁄₈" 4" NO 1¹⁄₂" X .065(16GA) — 53-0635

Yoke and Shaft AssemblyOverall Driveline (L)

Length L to End Part Numberc

36" 24" 65-1627

48" 36" 65-1639

60" 48" 65-1651

Yoke and Tube AssemblyOverall Driveline (L)

Length L to End Part Number

36" 24" 64-1627

48" 36" 64-1639

60" 48" 64-1651

World ShieldTM PlasticOverall Driveline (L)

Length Length Bell O.D. Part Number60" 51" 5¹⁄₄" 69-0648

Shield Bearings are not included. Please order part number 56-1600Note: Shield can be cut shorter to fit 36" and 48" drives.

Drive Shaft with World ShieldTM

Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number

36" 26³⁄₄" 38" 58-1627

48" 38³⁄₄" 62" 58-1639

60" 50³⁄₄" 86" 58-1651

Shield BearingBearing Use W/Shield

Bearing I.D. Width Part Number Part Number

1¹³⁄₁₆" ⁵⁄₁₆" 69-0648 56-1600

Note: Two (2) Bearings per box

L

L

L

L

L

c c c c

c


17

N1000 SERIES

¹⁵⁄₁₆"

1¹⁄₂" 2⁵⁄₁₆"


Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹⁄₁₆" 56-3001 10-5430



1"-15 SPL 2¹³⁄₁₆" 56-0615 10-5366

L

L



1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 10-4139

1³⁄₈"-21 SPL 3⁹⁄₁₆" 56-1857 10-5411


L

Stub Yoke

L

1"-15 SPL 5³⁄₈" 10-0615

(L)Stub Length Part Number


¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 1-0170

¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 1-0172*

¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 1-0171**

*Non-Greaseable **Greaseable thru 1 Bearing


Replaces Neapco 0600 Series - Interchangeble with Spicer® 1000 Series

ASAECategory 1

18



1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 10-4137

1³⁄₈"-21 SPL 3⁹⁄₁₆" 56-1857 10-5412

Note: Implement end use only

L

N1000 SERIES

Set Screw or Drill Thru(L) Keyway Dist. Part


⁵⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4373

³⁄₄" 1¹¹⁄₁₆" ³⁄₁₆" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-4693

³⁄₄" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-0413

³⁄₄" 2¹⁄₂" ³⁄₁₆" GAP (2)³⁄₈"-16 EAR ¹⁄₂" 10-4133

³⁄₄" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-0423

¹³⁄₁₆" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0433

¹³⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0443

¹³⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4173

⁷⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4943

⁷⁄₈" 1¹¹⁄₁₆" ¹⁄₄" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-1703

⁷⁄₈" 1¹¹⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₁₆" 10-4703

⁷⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0453

⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-5113

⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-0463

⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-4453

¹⁵⁄₁₆" 2¹⁄₄" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-0473

1" 1¹¹⁄₁₆" ¹⁄₄" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-1705

1" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0483

1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4573

1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-0493

1" 2¹⁄₂" — — ³⁄₈" DT EAR ¹⁄₂" 10-4443

1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4493

1¹⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4163

1¹⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4473

1¹⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4143

1¹⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-4113

1¹⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ²⁹⁄₆₄" 10-4103

1³⁄₁₆" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4153

1¹⁄₄" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4193

Round

L

Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series

19

Implement Yokes



Round-Double Keyway

¹³⁄₁₆" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5313

⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5213

1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5215

1¹⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5216

1³⁄₁₆" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-1574

1¹⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5218

³⁄₁₆" GAP¹⁄₄" GAP

³⁄₁₆" GAP¹⁄₄" GAP

³⁄₁₆" GAP¹⁄₄" GAP

¹⁄₄" GAP⁵⁄₁₆" GAP

¹⁄₄" GAP⁵⁄₁₆" GAP

¹⁄₄" GAP⁵⁄₁₆" GAP

L

N1000 SERIES

⁴⁷⁄₆₄"-16 SPL 2¹⁄₄" ¹⁵⁄₃₂" ⁷⁄₁₆" 10-4611

⁴⁷⁄₆₄"-16 SPL 2³⁄₄" ²⁹⁄₆₄" ⁷⁄₁₆" 10-5352

1" RD 2³⁄₄" ¹⁵⁄₃₂" ⁷⁄₁₆" 10-5322*

*Also has ¹⁄₄" keyway and set screw hole

Clamp(L) Drill Thru

Bore Length Hole SIze Bolt Fit Part Number

L

EARGAP



1¹⁄₄" 2¹₂" ⁵⁄₁₆" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-4123

1¹⁄₄" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 ¹⁄₂" 10-5156

1¹⁄₄" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4183

1¹⁄₄" 2¹⁄₂" - - ³⁄₈"-D.T. EAR ⁵⁄₈" 10-4363

1³⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ⁵⁄₈" 10-4293

Round

L


20

N1000 SERIES

Hexagon


L⁷⁄₈" 5¹⁄₂" GAP 1³⁄₄" 10-3162*

1¹⁄₈" 5¹⁄₂" GAP 1³⁄₄" 10-0332*

* Grease fitting assembled in yoke

Grease Fitting(L) Distance

Bore Length Loc. to End Part Number

Implement Yokes

Set Screw or Drill Thru(L) Distance


³⁄₄" 1¹¹⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₁₆" 10-5354

³⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-0422

³⁄₄" 2¹⁄₂" ⁵⁄₁₆" D.T. GAP ¹⁄₂" 10-5149

⁷⁄₈" 1¹¹⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₁₆" 10-1707

⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-0412

⁷⁄₈" X 1"* 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-1580

1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-0452

1¹⁄₈" 2¹⁄₂" — — — 10-1557

*Double Square

Square

L



Hexagon

⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 GAP ⁵⁄₈" 10-4282

1¹⁄₈" 2¹⁄₂" ³⁄₈"-16 GAP ¹⁄₂" 10-0432L



⁷⁄₈"-13 SPL 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-4481

⁷⁄₈"-13 SPL 2¹⁄₂" — — — 10-4333

1"-6 SPL 2¹⁄₂" — — — 10-5158

1¹⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" D.T. EAR ¹⁄₂" 10-0411

1³⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" D.T. EAR ³⁄₈" 10-0431

Spline

L


21

N1000 SERIES

RoundGrease Fitting

(L) Keyway DistanceBore Length Width Loc. Loc. to End Part Number

L³⁄₄" 5¹⁄₂" ³⁄₁₆" GAP GAP 2" 10-0313*

¹³⁄₁₆" 5¹⁄₂" ¹⁄₄" GAP GAP 1³⁄₄" 10-0323*

⁷⁄₈" 5¹⁄₂" ¹⁄₄" GAP GAP 1³⁄₄" 10-0333*

¹⁵⁄₁₆" 5¹⁄₂" ¹⁄₄" GAP GAP 2" 10-3203*

1" 5¹⁄₂" ¹⁄₄" GAP GAP 1³⁄₄" 10-0383*

1¹⁄₈" 5¹⁄₂" ⁵⁄₁₆" GAP GAP 1³⁄₄" 10-3183*

1¹⁄₄" 5¹⁄₂" ⁵⁄₁₆" GAP GAP 1³⁄₄" 10-3163*

1¹⁄₄" 5¹⁄₂" ¹⁄₄" GAP GAP 2" 10-3173*


Grease Fitting(L) Distance

Bore Length Loc. to End Part Number

Spline Slip

L1¹⁄₈"-10 SPL 5¹⁄₂" GAP 1³⁄₄" 10-0381*

1¹⁄₈"-10 SPL 5¹⁄₂" GAP 3¹⁄₂" 11-1075*

1¹⁄₈"-10 SPL 5¹⁄₂" GAP 3¹⁄₂" 10-5275*

1¹⁄₄"-6 SPL 5¹⁄₂" GAP 2" 10-1765*




³⁄₄" X ⁷⁄₈" 5¹⁄₂" ¹⁄₈" NPT EAR 1" 10-1769

Rectangular

L


SquareGrease Fitting

(L) DistanceBore Length Loc. to End Part Number

L³⁄₄" 5¹⁄₂" GAP 2" 10-1758*

³⁄₄" 5¹⁄₂" GAP 1³⁄₄" 10-0312*

⁷⁄₈" 5¹⁄₂" GAP 1³⁄₄" 10-0322*

1" 5¹⁄₂" GAP 1³⁄₄" 10-3122*


Implement Yokes


22

— 2" RD 3¹⁄₂" 2³⁄₄" BC* ¹¹⁄₃₂" 4 46-6900

2¹⁄₄" MP 1³⁹⁄₆₄" RD 3¹⁄₂" 2³⁄₄" BC* ¹¹⁄₃₂" 4 46-6902

— 1⁴³⁄₆₄" RD 3¹⁄₂" 2³⁄₄" ¹¹⁄₃₂" 4 10-1022

Flange Yokes(L) Flange Bolt Hole No. of Part

Bore Length Type Dia. Circle Dia. Holes Number

L* Uneven bolt hole spacing


Bore Length Part Number For Tube Part Number1" X 1¹⁄₈" 2³⁄₄" 70-1001 1" X 1¹⁄₈" 10-5131

1³⁄₁₆" RD 3" 70-1625 1⁵⁄₈" X 16GA 10-5132

1¹⁄₄" RD 2¹⁄₂" — 1¹⁄₄" X 13GA 10-5174

— 2¹⁄₂" 70-2000 2" X 14GA 10-1005

L

N1000 SERIESDouble Pivot Yoke

(L) MaximumL to L Static Angle Operating Angle Part Number

1¹¹⁄₁₆" 7O 5O 10-5303

2¹⁄₂" 20O 18O 10-5361

3³⁄₁₆" 90O 45O 10-5331

c c

L


Bore Length Part Number Part Number³⁄₄" X ⁷⁄₈" 2¹⁄₂" 73-0750 10-5129

L

Rectangular Shaft(L) Use W/Weld Yoke

Size Length Part Number Part Number³⁄₄" X ⁷⁄₈" 72" 10-5129 73-0750

L


23


O.D. Length Thickness Yoke Number Part Number1" X 1¹⁄₈" 72" .125 15-5131 70-1001

1⁵⁄₈" RD 72" .065(16GA) 15-5132 70-1625L


Slip Sleeve

³⁄₄" X ⁷⁄₈" 4" NO 1⁵⁄₈" X .065(16GA) — 53-0634



36" 24" 65-0627

48" 36" 65-0639

60" 48" 65-0651



36" 24" 64-0627

48" 36" 64-0639

60" 48" 64-0651

c



36" 26³⁄₄" 38" 58-0627

48" 38³⁄₄" 62" 58-0639

60" 50³⁄₄" 86" 58-0651

L

L

L

L

c c c c

N1000 SERIESReplaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series

24

N1000 SERIES



1¹⁄₂" ⁵⁄₁₆" 69-0648 56-0600



Length Length Bell O.D. Part Number

L

60" 51" 5¹⁄₄" 69-0648

Shield Bearings are not included. Please order part number 56-0600Note: Shields can be cut to fit 36" and 48" drives.


The products in this section of the Catalog were designed specifically for the Agricultural PowerTake-Off (PTO) and Lawn & Garden replacement market.

Please refer to pages 97-127 for Auxiliary PTO truck mounted and industrial applications

25

1200 SERIES


1¹⁄₁₆" 1¹³⁄₁₆" 2⁹⁄₁₆" 1-1275




1³⁄₈"-6 SPL 4¹⁄₁₆" 56-1857 12-1190

1³⁄₈"-21 SPL 4¹⁄₁₆" 56-1857 12-1193



Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹⁄₂" 56-3001 12-2330

1³⁄₈"-21 SPL 4¹⁄₂" 56-3001 12-2321

1¹³⁄₁₆"

1¹⁄₁₆"

2⁹⁄₁₆"

L

L



1"-15 SPL 3¹⁄₄" 56-0615 12-2300

L

Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series

ASAECategory 2

26

1200 SERIES


1³⁄₈"-6 SPL 4¹⁄₁₆" 56-1857 12-1300

1³⁄₈"-21 SPL 4¹⁄₁₆" 56-1857 12-1350


L




³⁄₄" 2³⁄₄" ³⁄₁₆" EAR ³⁄₈"-16 GAP ⁵⁄₈" 12-1312

¹³⁄₁₆" 3¹⁄₂" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1112

⁷⁄₈" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁵⁄₈" 12-1133

⁷⁄₈" 3¹⁄₂" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1113

¹⁵⁄₁₆" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁵⁄₈" 12-1134

1" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1135

1" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 EAR ⁵⁄₈" 12-1155

1" 3¹⁄₂" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1115

1¹⁄₈" 2³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1137

1¹⁄₈" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 EAR ⁵⁄₈" 12-1162

1¹⁄₈" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1117

1¹⁄₈" 3¹⁄₂" ¹⁄₄" EAR (2)³⁄₈"-16 ⁷⁄₈" 12-1326

1³⁄₁₆" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1118

1¹⁄₄" 2³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1139

1¹⁄₄" 2³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 EAR ⁵⁄₈" 12-1169

1¹⁄₄" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1119

1¹⁄₄" 3¹⁄₂" ¹⁄₄" EAR (2)³⁄₈"-16 ⁵⁄₈" 12-1176

1³⁄₈" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1120

1¹⁄₂" 2³⁄₄" ³⁄₈" GAP (2)³⁄₈"-16 ⁵⁄₈" 12-1175

Round

L

EARGAP

EARGAP

EARGAP


27

1200 SERIES



1" X 1¹⁄₈" 3¹⁄₂" ²⁵⁄₆₄" GAP 1" 12-1197

Rectangular



1" 3" ²¹⁄₆₄" EAR ⁵⁄₈" 12-1319

1¹⁄₈" 3¹⁄₂" ⁵⁄₁₆" GAP ⁵⁄₈" 12-1302

1¹⁄₄" 3" ²⁵⁄₆₄" EAR ⁵⁄₈" 12-1330

1³⁄₈" 3¹⁄₄" ¹⁷⁄₃₂" GAP ¹⁄₂" 12-1320

Shear



1¹⁄₈"-6 SPL 3¹⁄₂" ²¹⁄₆₄" GAP 1¹⁄₄" 12-1181

1³⁄₈"-6 SPL 3¹⁄₂" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 12-1172

1³⁄₈"-21 SPL 3¹⁄₂" — — — 12-1315

Spline

L

L

L



1" 3¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1215

1¹⁄₈" 3¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1216

1¹⁄₄" 3¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1218

³⁄₁₆"¹⁄₄"

¹⁄₄"⁵⁄₁₆"

¹⁄₄"⁵⁄₁₆"

L

Implement YokesRound-Double Keyway



1¹⁄₈" 2³⁄₄" ³⁄₈"-16 GAP ⁵⁄₈" 12-1168

1¹⁄₈" 3¹⁄₂" ³⁄₈"-16 GAP ⁷⁄₈" 12-1328

Hexagon

L


28

1200 SERIESImplement Yokes



⁷⁄₈" 2³⁄₄" ³⁄₈"-16 EAR ⁵⁄₈" 12-1170

⁷⁄₈" X 1"* 3¹⁄₂" ³⁄₈"-16 EAR ⁷⁄₈" 12-1301

1" 2³⁄₄" ³⁄₈"-16 EAR ⁵⁄₈" 12-1159

1" 3¹⁄₂" ³⁄₈"-16 EAR ⁷⁄₈" 12-1163

1¹⁄₈" 3¹⁄₂" ²⁵⁄₆₄" D.T. GAP ⁵⁄₈" 12-1148

1¹⁄₄" 2³⁄₄" ¹¹⁄₃₂" D.T. GAP ⁵⁄₈" 12-1321

*Double Square

Square

HexagonSet Screw


1¹⁄₈" 5¹⁄₄" ¹⁄₈" NPT GAP 1³⁄₄" 12-1173




1" 5¹⁄₄" ¹⁄₄" EAR ¹⁄₈" NPT EAR 1³⁄₄" 12-1316

1¹⁄₄" 5¹⁄₄" ⁵⁄₁₆" EAR ¹⁄₈" NPT EAR 1³⁄₄" 12-1174

Round

SplineSet Screw


1¹⁄₄"-6 SPL 5¹⁄₄" ¹⁄₈" NPT GAP 1³⁄₄" 12-1171

1³⁄₈"-16 SPL 5¹⁄₄" ¹⁄₄"-28 GAP 3³⁄₈" 12-2322

SquareSet Screw


1" 5¹⁄₄" ¹⁄₈" NPT GAP 1³⁄₄" 12-1314

L

L

L

L

L


29

1200 SERIESDouble Pivot Yoke


2³⁄₈" 10O 7O 12-1410

3³⁄₈" 37O 35O 12-1400

c c

L


Bore Length Part Number Part Number1" X 1¹⁄₈" 2¹⁵⁄₁₆" 73-1001 12-1340

Rectangular Shaft(L) Use W/Weld Yoke

Bore Length Part Number Part Number1" X 1¹⁄₈" 72" 12-1340 73-1001


Bore Length Part Number For Tube Part Number1⁹⁄₃₂" X 1¹³⁄₃₂" 2¹⁵⁄₁₆" 70-1250 1¹⁄₄" X 1³⁄₈" 12-1318

1¹⁄₂" RD 3³⁄₄" 70-2000 2" X .083(14GA) 12-1334

Rectangular and Round Tube(L) Wall Use W/Weld Yoke

O.D. Length Thickness Part Number Part Number

1¹⁄₄" X 1³⁄₈" 72" .125 12-1318 70-1250

2" 72" .083(14GA) 12-1334 70-2000

L

L

L

L


Slip Sleeve

1" X 1¹⁄₈" 5" YES 2" X .083(14GA) 53-203456-229456-2295 L


30

1200 SERIES



36" 24" 65-2827

48" 36" 65-2839

60" 48" 65-2851



36" 24" 64-2727

48" 36" 64-2739

60" 48" 64-2751

c


Length Length Bell O.D. Part Number60" 51" 6¹⁄₈" 69-1248




36" 27¹⁄₄" 38" 58-1227

48" 39¹⁄₄" 62" 58-1239

60" 51¹⁄₄" 86" 58-1251



2¹⁄₁₆" ¹¹⁄₃₂" 69-1248 56-2000


L

L

L

L

c c c c


31

1200 SERIES

Friction Clutch2 Plate

(L) Friction Disc RepairBore Length Flange O.D. Part Number Part Number

L

1³⁄₈"-6 SPL 5³⁄₄" 7¹⁄₈" 61-1200* 80-1202

* Two (2) per Box

Shear Bolt: Collar Type Q.D.(L) Collar Repair Kit

Bore Length Part Number Part Number

1³⁄₈"-6 SPL 6³⁄₈" 56-3001 12-2506

1³⁄₈"-21 SPL 6³⁄₈" 56-3001 12-2521L

Unwelded Driveshaft(L)

Max. Length Part Number55¹⁄₄" 63-1254

67¹⁄₄" 63-1266

L

Note: The speed and length combination should not exceed the criticalspeed of the driveshaft.

Unwelded slip assemblies can be furnished in lengths up to the maximumshown in the table. One end of the driveshaft is supplied unwelded and maybe cut to the desired length by the customer.

Slip Yoke and Stub Assembly(L) (L)

Min. L to End Max. L to End Part Number

6¹⁄₄" 7³⁄₄" 51-2322

Yoke and Tube Assembly(L)

L to End Part Number

L

L

c c

48" 52-4600

60" 52-5800

c


32

1800 SERIES


1" 2¹¹⁄₃₂" 3¹⁄₈" 1-1875




1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 18-7403

1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 18-7406



Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹¹⁄₃₂" 56-3001 18-7330

1³⁄₈"-21 SPL 4¹¹⁄₃₂" 56-3001 18-7339



1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 18-7404

1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 18-7405


3¹⁄₈"

1"

2¹¹⁄₃₂"

L

L

L

Replacement Category 3 Series

ASAECategory 3

33


Round



1" 3³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7115

1¹⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7117

1¹⁄₄" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7119

1³⁄₈" 3¹⁄₂" — — ¹⁷⁄₃₂" D.T. GAP ¹⁄₂" 18-7315

1³⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7120

1¹⁄₂" 3¹⁄₄" ³⁄₈" EAR ⁵⁄₈" 18-7313³⁄₈"-16 EAR³⁄₈"-16 GAP



1¹⁄₈" 3³⁄₄" ³⁄₈"-16 EAR ⁷⁄₈" 18-7128

Hexagon



1³⁄₈"-6 SPL 3³⁄₄" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 18-7132

Spline



1" 3⁵⁄₈" — — — 18-7125

1¹⁄₄" 3¹⁄₄" — — — 18-7127

Square

(L) Flange Bolt Hole No. ofBore Length Type Dia. Circle Dia. Holes Part Number

1¹⁄₁₆" 4⁵⁄₁₆" RECT 8" 7¹⁄₄" ¹¹⁄₃₂" 4 48-7202

Torque Limiter

L

L

L

L

L


34

1800 SERIESDouble Pivot Yoke


2¹⁄₈" 10O 7O 18-1800

2⁷⁄₈" 24O 22O 18-1805

3³⁄₈" 34O 31O 18-1810

c c


Bore Length Part Number Part Number1" X 1¹⁄₈" 3³⁄₈" 73-1001 18-7327

Rectangular Shaft(L) Use W/Weld



Bore Length Part Number For Tube Part Number1⁹⁄₃₂" X 1¹³⁄₃₂" 3³⁄₈" 70-1250 1¹⁄₄" X 1³⁄₈" 18-7328

1¹⁄₂" RD 3¹⁄₂" 70-2000 2" X .083(14GA) 18-7305


O.D. Length Thickness Yoke Number Part Number

56-229456-2295

Slip Sleeve

1" X 1¹⁄₈" 5" YES 2" X .083(14GA) 53-2034


1¹⁄₄" X 1³⁄₈" 72" .125 18-7328 70-1250

2" 72" .083(14GA) 18-7305 70-2000

L

L

L

L

L

L


35

1800 SERIES



36" 24" 65-1828

48" 36" 65-1840

60" 48" 65-1852



36" 24" 64-1828

48" 36" 64-1840

60" 48" 64-1852

c






36" 28" 38" 58-1828

48" 40" 62" 58-1840

60" 52" 86" 58-1852



2¹⁄₁₆" ¹¹⁄₃₂" 69-1248 56-2000


L

L

L

L

c c c c


36

1800 SERIESFriction Clutch

2 Plate(L) Friction Disc Repair

Bore Length Flange O.D. Part Number Part Number

L

1³⁄₈"-6 SPL 5⁷⁄₈" 7¹⁄₈" 61-1200* 80-1802

* Two (2) per box



L

1³⁄₈"-6 SPL 6³⁄₈" 56-3001 18-7506


37

2000 SERIES


1¹⁄₈" 2⁵⁄₈" 2⁵⁄₈" 1-2075

Cross and Bearing Kit: Outside Lock-Up



1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 20-9309

1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 20-9325



Bore Length Part Number Part Number1³⁄₈"-6 SPL 4³⁄₄" 56-3001 20-9330

1³⁄₈"-21 SPL 4³⁄₄" 56-3001 20-9321



1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 20-9319

1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 20-9324


1¹⁄₈"

2⁵⁄₈"

L

L

L


ASAECategory 3

38


Round



1" 3³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9115

1¹⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9117

1³⁄₁₆" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9118

1¹⁄₄" 3³�₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9302

1¹⁄₄" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9119

1³⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9120

1³⁄₈" 3³⁄₄" — — ⁷⁄₁₆" D.T. GAP ¹³⁄₁₆" 20-9189

1⁷⁄₁₆" 3³⁄₄" ³⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9154

1¹⁄₂" 3³⁄₄" ³⁄₈" GAP ⁷⁄₈" 20-9307³⁄₈"-16 EAR³⁄₈"-16 GAP

¹⁄₄"⁵⁄₁₆"

¹⁄₄"⁵⁄₁₆"

¹⁄₄"⁵⁄₁₆"



Round-Double Keyway

1¹⁄₈" 3³⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9216

1³⁄₁₆" 3³⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9217

1¹⁄₄" 3³⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9218

HexagonSet Screw


1¹⁄₄" 4" ¹⁄₄"-28 GAP 1¹⁄₂" 20-9191



1¹⁄₈" 3³⁄₄" ¹⁄₄" GAP ⁷⁄₈" 20-9318

1¹⁄₄" 3³⁄₄" ¹⁄₄" GAP ⁷⁄₈" 20-9317

1³⁄₈" 3¹⁄₂" ¹⁷⁄₃₂" GAP ¹⁄₂" 20-9160

1¹⁄₂" 3³⁄₄" ¹⁄₄" GAP ⁷⁄₈" 20-9320

Shear

L

L

L

L


39

2000 SERIES



1¹⁄₈"-6 SPL 3⁷⁄₁₆" ²¹⁄₆₄" GAP 1¹⁄₁₆" 20-9180

1¹⁄₄"-6 SPL 2³⁄₄" ¹¹⁄₃₂" GAP 1" 20-9311

1¹⁄₄"-6 SPL 3¹⁄₂" ¹⁄₂"-20 GAP 1¹⁄₁₆" 20-9306*

1³⁄₈"-6 SPL 3³⁄₄" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 20-9132

1³⁄₈"-21 SPL 3³⁄₄" ²¹⁄₆₄" GAP ⁷⁄₈" 20-9193

*Note: For use with part number 53-2047

SplineImplement Yokes

L



⁷⁄₈" X 1"* 3³⁄₄" ³⁄₈"-16 EAR ⁷⁄₈" 20-9310

1¹⁄₈" 3³⁄₄" ³⁄₈"-16 GAP ⁷⁄₈" 20-9183

1¹⁄₄" 3⁹⁄₁₆" ³⁄₈"-16 GAP ³⁄₄" 20-9127

*Double Square

Square

Torque Limiter

1¹⁄₁₆" 4⁵⁄₁₆" RECT 8" 7¹⁄₁₆" ¹¹⁄₃₂" 4 48-9202

(L) Flange Bolt Hole No. ofBore Length Type Dia. Circle Dia. Holes Part Number

L

L


Bore Length Part Number Part Number1" X 1¹⁄₈" 3³⁄₁₆" 73-1001 20-9126

1" X 1¹⁄₈" 3³⁄₁₆" 73-1001 20-9129*

*Common phasing for Weasler® manufactured drives

Weasler® drives are phased 90° off from Neapco drives and therefore arenot interchangeable in half-shaft sub-assemblies.

L

Rectangular Shaft(L) Use W/Weld


L


40

2000 SERIESRound and Rectangular Tube Weld Yoke

(L) Use W/TubeBore Length Part Number For Tube Part Number

1¹⁄₂" RD 4" 70-2000 2" X .083(14GA) 20-9131

1⁹⁄₃₂" X 1¹³⁄₃₂" RECT 3³⁄₁₆" 70-1250 1¹⁄₄"X1³⁄₄" 20-9313

Round and Rectangular Tube(L) Wall Use W/Weld Yoke


2" 72" .083(14GA) 20-9131 70-2000

1¹⁄₄" X 1³⁄₈" 72" .125 20-9313 70-1250


Slip Sleeve

1" X 1¹⁄₈" 5" YES 2" X .083(14GA) 53-203456-229456-2295

L

L

L



36" 28³⁄₁₆" 44³⁄₁₆" 58-2028

48" 40" 68⁵⁄₁₆" 58-2040

60" 52" 80¹⁄₄" 58-2052

L

Bearing (L) Use W/Tube PartDiameter Diameter End to Weld Part Number Number

Bearing Stub

1¹⁄₄"-6 SPL 1³⁄₈" 4¹⁄₂" 70-2000 53-2047*

*Note: For use with part number 20-9306Drilled for cone pointed set screw

L



36" 23⁵⁄₈" 65-2828

48", 60" 35³⁄₄ " 65-2840L

c c c c


41

2000 SERIESYoke, Tube, and Sleeve Assembly

Overall Driveline (L)Length L to End Part Number

36" 24³⁄₄" 64-2728

48" 36⁹⁄₁₆" 64-2740

60" 48⁹⁄₁₆" 64-2752

c






2¹⁄₁₆" ¹¹⁄₃₂" 69-1248 56-2000


L

L



L1³⁄₈"-6 SPL 6¹⁄₃₂" 56-3001 20-9506

1³⁄₈"-21 SPL 6¹⁄₃₂" 56-3001 20-9521


42

2200 SERIES


1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2-2275

1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2-2276*

*Greaseable Thru (2) Bearings


1¹⁄₄" 1¹⁄₄"



1³⁄₈"-6 SPL 4¹³⁄₁₆" 56-1857 22-2312

1³⁄₈"-21 SPL 4¹³⁄₁₆" 56-1857 22-2317



Bore Length Part Number Part Number1³⁄₈"-6 SPL 5" 56-3001 22-2330

1³⁄₈"-21 SPL 5" 56-3001 22-3521

1³⁄₄"-20 SPL 6" 56-2669 22-1319

L



1³⁄₈"-6 SPL 4¹³⁄₁₆" 56-1857 22-2315

1³⁄₈"-21 SPL 4¹³⁄₁₆" 56-1857 22-2316


L

L

3⁷⁄₃₂"


ASAECategory 4

43






Round-Double Keyway

1" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1131

1¹⁄₈" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1132

1³⁄₁₆" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1129

1¹⁄₄" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1133

1¹⁄₄" 4³⁄₁₆" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1116

1³⁄₈" 4³⁄₁₆" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1118

1³⁄₈" 4³⁄₁₆" ³⁄₈" EAR ³⁄₄" 22-1155

1³⁄₈" 4¹⁄₈" ³⁄₈" EAR ²¹⁄₆₄"-D.T. GAP 1¹⁄₄" 22-1158

1⁷⁄₁₆" 4³⁄₁₆" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1119

1⁷⁄₁₆" 4³⁄₁₆" ³⁄₈" EAR 1" 22-1178

1¹⁄₂" 4³⁄₁₆" ³⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1120

1¹⁄₂" 4³⁄₁₆" ³⁄₈" EAR ⁷⁄₈" 22-1154

1⁵⁄₈" 4³⁄₈" ³⁄₈" EAR ³⁄₈"-16 EAR ⁵⁄₈" 22-1338

1³⁄₄" 4³⁄₈" ³⁄₈" EAR 22-1316

1¹⁄₄" 4³⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1218

1³⁄₈" 4³⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1219

¹⁄₄"⁵⁄₁₆"

⁵⁄₁₆"³⁄₈"

Round

L

L

³⁄₈"-16 EAR²⁵⁄₆₄"-D.T. GAP

³⁄₈"-16 EAR⁷⁄₁₆"-D.T. GAP

³⁄₈"-16 EAR³⁄₈"-16 GAP

³⁄₈"-16 EAR ⁷⁄₈"¹⁷⁄₆₄"-D.T. GAP 1³⁄₈"


44

2200 SERIES



Implement YokesSpline

(L) Drill Thru DistanceBore Length Hole Size Loc. to End Part Number

Shear

1¹⁄₄" 4³⁄₁₆" ¹⁄₄" GAP ⁷⁄₈" 22-1145

1³⁄₈" 4³⁄₁₆" ¹⁷⁄₃₂" GAP ³⁄₄" 22-1337

1¹⁄₂" 4³⁄₁₆" ¹⁄₂" GAP ¹¹⁄₁₆" 22-1162

1¹⁄₈"-6 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP 1¹⁄₄" 22-1142

1³⁄₈"-6 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP 1¹⁄₄" 22-1134

1³⁄₈"-6 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP ¹⁵⁄₁₆" 22-1138

1³⁄₈"-6 SPL 4¹⁄₈" ¹⁄₂"-20 GAP 1¹⁄₁₆" 22-1226*

1³⁄₈"-21 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP 1¹⁄₄" 22-1330

*Note: For use with Part Number 53-2247

L

L

Square

1³⁄₈"-6 SPL 4³⁄₄" ²¹⁄₆₄" ⁵⁄₁₆" 22-1140

1³⁄₈"-21 SPL 4³⁄₄" ¹⁷⁄₃₂" ¹⁄₂" 22-1105

1³⁄₄"-20 SPL 4¹³⁄₁₆" ¹⁷⁄₃₂" ¹⁄₂" 22-2275



1" 4³⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₈" 22-1125

1¹⁄₈" 4³⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₈" 22-1124

1³⁄₁₆" 4¹⁄₂" ¹³⁄₃₂" D.T. GAP ¹¹⁄₃₂" 22-1190

1¹⁄₄" 4¹⁄₈" ³⁄₈"-16 GAP ⁷⁄₈" 22-1128

1¹⁄₂" 4¹⁄₈" — — — 22-1130

1⁵⁄₈" 4¹⁄₈" — — — 22-1126

Clamp(L) Drill Thru

Bore Length Hole Size Bolt Fit Part Number

L

L


45


Torque Limiter


Double Pivot YokeL

L

2¹⁄₈" 16O 14O 22-2200

7¹⁄₄" 90O 45O 22-2205



L

1³⁄₁₆" SQ 3⁵⁄₈" 73-1188 22-1344

L

(L) Use W/Weld YokeSize Length Part Number Part Number

Square Shaft

1³⁄₁₆" 72" 22-1344 73-1188

Tube Weld Yoke(L) Use W/Tube Part

Bore Length Part Number For Tube Number

1⁵⁄₈" RD 4¹⁄₂" 70-2250 2¹⁄₄" X .120(11GA) 22-1343

1⁵⁄₈" RD 4¹⁄₂" 70-2125 2¹⁄₈" X .120(11GA) 22-1325

1⁵⁄₈" RD 4¹⁄₂" 2¹⁄₈" X .083(14GA) 22-1307

Round Tube(L) Wall Use W/Weld Yoke Part

O.D. Length Thickness Part Number Number

2¹⁄₈" 72" .120 (11GA) 22-1325 70-2125

2¹⁄₈" 72" .083 (14GA) 22-1307 —

2¹⁄₄" 72" .120 (11GA) 22-1343 70-2250

L

L

c c

1¹⁄₁₆" 4⁵⁄₁₆" RECT 8" ¹¹⁄₃₂" D.T. 4 48-1181

(L) Flange No. ofBore Length Type Dia. Hole Size Holes Part Number


46

2200 SERIES

(L) Lube Shield PartBore Length Fitting For Tube Brg. No. Number

Slip Sleeve

L56-229456-2295

56-229456-2295

1³⁄₁₆" SQ 5" YES 2¹⁄₄" X .120(11GA) 53-2434

1³⁄₁₆" SQ 5" YES 2¹⁄₈" X .120(11GA) 53-2435

1³⁄₁₆" SQ 5" YES 2¹⁄₈" X .083(14GA) — 53-3500

Bearing (L) Use W/Tube PartDiameter Diameter End to Weld Part Number Number

Bearing Stub

1³⁄₈"-6 SPL 1³⁄₈" 4¹⁄₂" 70-2250 53-2247*

*Note: For use with part number 22-1226Drilled for cone pointed set screw

Yoke and Shaft Assembly



36" 28¹⁄₂" 44¹⁄₂" 58-2229

48" 39" 65" 58-2239

60" 51" 77" 58-2251

Overall Driveline (L)Length L to End Part Number

36" 23⁷⁄₈" 65-2629

48", 60" 33⁷⁄₈" 65-2639

c

L

L

L

c c c c

Yoke, Tube, and Sleeve AssemblyOverall Driveline (L)


36" 24⁵⁄₈" 64-2529

48" 35¹⁄₈" 64-2539

60" 47¹⁄₈" 64-2551

L


47

2200 SERIESWorld ShieldTM Plastic

Overall Driveline (L)Length Length Bell O.D. Part Number

60" 51" 7¹⁄₁₆" 69-2248


L



2¹⁄₁₆" ¹¹⁄₃₂" 69-2248 56-2200


Friction ClutchLight Duty


LHeavy Duty

L

80O CV DriveshaftTractor (L) (L)Yoke Min. L to L Max. L to L Part Number

1³⁄₈"-6 SPL 48" 65⁷⁄₁₆" 80-3506

1³⁄₈"-21 SPL 48" 65⁷⁄₁₆" 80-3521

Repair parts found on page 64.

1³⁄₈"-6 SPL 7¹¹⁄₁₆" 8¹⁄₄" 61-2200* 80-3502

* Two (2) per box


1³⁄₈"-6 SPL 7¹¹⁄₁₆" 8¹⁄₄" 61-2200* 80-3504

* Two (2) per box

c c c c

L



L1³⁄₈"-6 SPL 6⁷⁄₈" 56-3001 22-9506

1³⁄₈"-21 SPL 6⁷⁄₈" 56-3001 22-9521


48

C.V. REPAIR PARTSBearing Overall Journal

Diameter Length Length Part Number

1¹⁄₄" 3¹⁄₂" 3¹³⁄₁₆" 2-2475

Cross and Bearing Kit

(L)Bore Length

Collar Type Q.D.

L

1³⁄₈"-6 SPL 5¹¹⁄₃₂"

Collar Repair KitPart Number

56-3001

1³⁄₈"-21 SPL 5¹¹⁄₃₂" 56-3001

Part Number24-2406

24-2421

1³⁄₄"-20 SPL 5¹⁹⁄₃₂" 56-2669 24-2420

Part Number

C.V. Housing

Shaft Weld Yoke(L)

Length Part Number

(L)Size Length Part Number

Spline Shaft

Shield Brg.Bearing (L) LubeDiameter Length Fitting For Tube Number Part Number

1⁵⁄₈"-10 SPL 6" Yes 2¹⁄₄" X .120(11GA) 56-2295 53-2415

Sleeve

Overall Length Part Number

Shield Set

58" Shield Set includes yoke and sleeve bearings. 68-2244


Shield Set

7¹⁄₁₆" Housing Shield set includes cone, bearing, and ring. 68-2245

L

L

L

L

4³⁄₃₂"1¹⁄₄"

1⁵⁄₈"-10 SPL 27⁷⁄₈" 72-2231

2⁵⁄₈" 24-2401

4¹⁄₄" 24-2400

(L)L to Lc c

2200 / N44 Series

49

N44 SERIES


1⁵⁄₁₆" 2⁵¹⁄₆₄" 4¹⁄₃₂" 3-0044




1³⁄₈"-6 SPL 4⁷⁄₈" 56-1857 44-2220

1³⁄₈"-21 SPL 4⁷⁄₈" 56-1857 44-2201

1³⁄₄"-20 SPL 4⁷⁄₈" 56-2446 44-6300



Bore Length Part Number Part Number1³⁄₈"-6 SPL 5⁷⁄₃₂" 56-3001 44-4406

1³⁄₈"-21 SPL 5⁷⁄₃₂" 56-3001 44-4421

Implement YokesRound



1⁷⁄₁₆" 4¹⁄₈" ³⁄₈" EAR ³⁄₈"-16 GAP ³⁄₄" 44-2360

1¹⁄₂" 4¹⁄₈" ³⁄₈" EAR ⁷⁄₈" 44-2460

1⁵⁄₈" 4¹⁄₈" ³⁄₈" EAR ³⁄₈"-16 EAR ⁷⁄₈" 44-2610

1³⁄₄" 4¹⁄₈" ³⁄₈" EAR ⁷⁄₈" 44-2820

2" 4¹⁄₈" ¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-3200

³⁄₈"-16 EAR³⁄₈"-16 GAP

³⁄₈"-16 EAR³⁄₈"-16 GAP

L

L

L

2⁵¹⁄₆₄"

1⁵⁄₁₆"

4¹⁄₃₂"

Replaces Rockwell® 44R Series - Replaces Weasler® 44 Series

ASAECategory 5

50

N44 SERIESImplement Yokes

¹⁄₄"⁵⁄₁₆"

¹⁄₄"⁵⁄₁₆"

⁵⁄₁₆"³⁄₈"



Round-Double Keyway

1¹⁄₄" 4¹⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-2045

1³⁄₈" 4¹⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-2256

1¹⁄₂" 4¹⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-2456



1³⁄₈"-6 SPL 4¹⁄₈" ²¹⁄₆₄" GAP ⁷⁄₈" 44-2206

1³⁄₈"-21 SPL 4¹⁄₈" ²¹⁄₆₄" GAP ⁷⁄₈" 44-2221

Spline



1¹⁄₈" 4¹⁄₈" ³⁄₈"-16 EAR ⁷⁄₈" 44-1826

Square

L

L

L

(L) Drill ThruBore Length Hole Size Bolt Fit Part Number

Clamp

L


Bore Length Part Number Part Number1⁵⁄₁₆" SQ 4¹⁄₈" 73-1313 44-2100

Square Shaft(L) Use W/Weld

Bore Length Part Number Part Number1⁵⁄₁₆" SQ 72" 44-2100 73-1313

L

L

1³⁄₄"-20 SPL 5" ⁴¹⁄₆₄" ⁵⁄₈" 44-4475


51

N44 SERIES

1⁷⁄₈" RD 4⁷⁄₈" 70-2500 2¹⁄₂" X .134(10GA) 44-2200


Bore Length Part Number For Tube Part Number

L

Round Tube(L) Wall Use W/Weld Yoke


2¹⁄₂" 72" .134(10GA) 44-2200 70-2500L

Slip Sleeve

1³⁄₁₆" 5" YES 2¹⁄₄" X .120(11GA) 56-2295 53-2434

1⁵⁄₁₆" 5" YES 2¹⁄₂" X .134(10GA) — 53-2643

1⁵⁄₁₆" 5" YES 2³⁄₄" X .109(12GA) 56-2646 53-2644

L




36" 28¹⁄₂" 41¹⁵⁄₁₆" 58-4429

48" 39" 65" 58-4439

60" 50⁷⁄₁₆" 76⁷⁄₁₆" 58-4451

L

c c c c



36" 22⁷⁄₈" 65-4423

48", 60" 35³⁄₈" 65-4435

L

Yoke, Tube, and Sleeve AssemblyOverall Driveline (L)


36" 24¹⁄₈" 64-4424

48" 34⁵⁄₈" 64-4435

60" 46¹⁄₈" 64-4447

c

L


52

N44 SERIESWorld ShieldTM Plastic

Overall Driveline (L)Length Length Bell O.D. Part Number

60" 51" 8" 69-2648


L



2⁵⁄₈" ¹³⁄₃₂" 69-2648 56-0844


4 Plate


Friction Clutch2 Plate

L

L

1³⁄₈"-6 SPL 6¹³⁄₁₆" 8¹⁄₈" 61-1200* 80-4402

* Two (2) per box


1³⁄₈"-6 SPL 7¹¹⁄₁₆" 8¹⁄₈" 61-1200* 80-4404

* Two (2) per box

80O CV DriveshaftTractor (L) (L)Yoke Min. L to L Max. L to L Part Number

1³⁄₈"-6 SPL 48" 64 " 80-4406

1³⁄₈"-21 SPL 48" 64" 80-4421

Repair parts found on page 59.

c c c c

L


53

C.V. REPAIR PARTSBearing Overall JournalDiameter Length Length Part Number

1¹⁄₄" 3¹⁄₂" 3¹³⁄₁₆" 2-2475

Cross and Bearing Kit

(L)Bore Length

Collar Type Q.D.

L

1³⁄₈"-6 SPL 5¹¹⁄₃₂"

Collar Repair KitPart Number

56-3001

1³⁄₈"-21 SPL 5¹¹⁄₃₂" 56-3001

Part Number24-2406

24-2421

1³⁄₄"-20 SPL 5¹⁹⁄₃₂" 56-2669 24-2420

Part Number

C.V. Housing

(L)Length Part Number

Shaft Weld Yoke

(L)Size Length Part Number

Spline Shaft

Shield Brg.Bearing (L) LubeDiameter Length Fitting For Tube Number Part Number

1⁵⁄₈"-10 SPL 6" Yes 2¹⁄₄" X .120(11GA) 56-2295 53-2415

Sleeve


Shield Set

58" Shield Set includes yoke and sleeve bearings. 68-2244


Shield Set

7¹⁄₁₆" Housing Shield set includes cone, bearing, and ring. 68-2245

L

L

L

L

1¹⁄₄"

1⁵⁄₈"-10 SPL 27⁷⁄₈" 72-2231

2⁵⁄₈" 24-2401

4¹⁄₄" 24-2400

(L)L to Lc c

2200 / N44 Series

4³⁄₃₂"

54

2600 SERIES


1³⁄₈" 4³⁄₁₆" 4³⁄₁₆" 3-0188




1³⁄₈"-6 SPL 5¹⁄₄" 56-1857 26-5321

1³⁄₈"-21 SPL 5¹⁄₁₆" 56-1857 26-5319



Bore Length Part Number Part Number1³⁄₈"-6 SPL 5⁷⁄₁₆" 56-3001 26-5306

1³⁄₈"-21 SPL 5⁷⁄₁₆" 56-3001 26-5325

1³⁄₄"-20 SPL 6" 56-2669 26-5163



1³⁄₈"-6 SPL 5¹⁄₄" 56-1857 26-5324

1³⁄₈"-21 SPL 5¹⁄₁₆" 56-1857 26-5323


1³⁄₈"

L

L

L

4³⁄₁₆"

Replaces Walterscheid AgMaster® 1480 Series

ASAECategory 6

55


Round



1³⁄₈" 4¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 26-5118

1¹⁄₂" 4¹⁄₂" ³⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 26-5119

1³⁄₄" 4¹⁄₁₆" ³⁄₈" EAR ³⁄₈"-16 GAP ³⁄₄" 26-5131



1³⁄₈"-6 SPL 4¹⁄₂" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 26-5138

Spline

L

L


Bore Length Part Number Part Number1⁵⁄₁₆" SQ 4⁵⁄₈" 73-1313 26-5148

Square Shaft(L) Use W/Yoke

Bore Length Part Number Part Number1⁵⁄₁₆" 72" 26-5148 73-1313


Bore Length Part Number For Tube Part Number2" RD 5¹⁄₄" 70-2750 2³⁄₄" X .109(12GA) 26-5155

L

L

L

Round Tube(L) Wall Use W/Weld Yoke


2³⁄₄" 72" .109(12GA) 26-5155 70-2750L


56

2600 SERIES


Slip Sleeve

1⁵⁄₁₆" 5" YES 2³⁄₄" X .109(12GA) 56-2646 53-2644



36" 23⁵⁄₈" 65-6629

60" 34¹⁄₄ " 65-6639



36" 24" 64-6529

48" 33³⁄₈" 64-6539

60" 46¹⁄₈" 64-6551


Length Length Bell O.D. Part Number60" 51" 8" 69-2648




36" 28⁷⁄₈" 42⁵⁄₈" 58-2629

48" 38¹⁄₄" 62⁵⁄₈" 58-2639

60" 51" 75³⁄₈" 58-2651

L

L

L

L

L

c

c



2⁷⁄₈" ¹¹⁄₃₂" 69-2648 56-2600


c c c c


57

N55 SERIES


1¹⁷⁄₃₂" 4⁵⁄₁₆" 4⁵⁄₁₆" 3-0045



(L)Bore Length Part Number

1³⁄₈"-6 SPL 5¹⁄₈" 55-9306

1³⁄₈"-21 SPL 5¹⁄₈" 55-9321

1³⁄₄"-20 SPL 6¹⁄₈" 55-9320




Implement YokesRound

1¹⁄₂" 4⁵⁄₈" ³⁄₈" EAR ³⁄₈"-16 EAR 1" 55-2410

1⁵⁄₈" 4¹⁄₂" ³⁄₈" EAR ³⁄₈"-16 EAR 1" 55-2600

1³⁄₄" 4¹⁄₁₆" ³⁄₈" EAR ³⁄₈"-16 EAR ³⁄₄" 55-2800

2" 5⁵⁄₈" ¹⁄₂" EAR ¹⁄₂"-13 EAR 1¹⁄₁₆" 55-3240

Clamp

4⁵⁄₁₆"

1¹⁷⁄₃₂"

L

L

1³⁄₄"-20 SPL 5⁵⁄₈" ⁴¹⁄₆₄" ⁵⁄₈" 55-2836

(L) Drill ThruBore Length Hole Size Bolt Fit Part Number

L

Replaces Rockwell® 55N Series - Replaces Weasler® 55 Series

ASAECategory 6

58

N55 SERIESImplement Yokes



1³⁄₈"-6 SPL 5⁵⁄₈" ²¹⁄₆₄" GAP 1" 55-2229

Spline

L


Bore Length Part Number Part Number1⁵⁄₁₆" SQ 4¹⁄₈" 73-1313 55-2130

— 4⁵⁄₈" 70-2500 2¹⁄₂" X .134(10GA) 55-3640

Square Shaft(L) Use W/Weld

Bore Length Part Number Part Number1⁵⁄₁₆" 72" 55-2130 73-1313


Bore Length Part Number For Tube Part Number

L

L

LRound Tube

(L) Wall Use W/Weld YokeO.D. Length Thickness Part Number Part Number

2¹⁄₂" 72" .134(10GA) 55-3640 70-2500


Slip Sleeve

1⁵⁄₁₆" 5" YES 2¹⁄₂" X .134(10GA) — 53-2643

L

L


Length Length Bell O.D. Part Number60" 51" 8" 69-2648


L


59

N55 SERIESShield Bearing

Bearing Use W/ShieldBearing I.D. Width Part Number Part Number

2⁵⁄₈" ¹³⁄₃₂" 69-2648 56-0844



60

WORLD SHIELDTM

Shield Part Number 69-0648 69-1248 69-2248 69-2648

Important Shield Dimensions

Overall Shield Length (in.) 51" 51" 51" 51"Shield Bell O.D (in.) 5¹⁄₄" 6¹⁄₈" 7¹⁄₁₆ " 8"Inner Tube O.D. (in.) 2¹⁄₁₆" 2¹⁄₂" 2³⁄₄ " 3⁷⁄₁₆"Outer Tube O.D. (in.) 2⁵⁄₁₆" 2³⁄₄" 3" 3¹¹⁄₁₆"

PTO Groove GroovePTO Manufacturer's Bearing O.D. Width Shield

Manufacturer Series Part Number (in.)* (in.) Part Number

Indexed by PTO Manufacturer and Series

AgMaster 1140, 1240 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-1248(Walterscheid) 1340 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-2248

1440 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-26481480 56-2600 2⁷⁄₈" ¹¹⁄₃₂" 69-2648

Bondioli & Pavesi 1 56-2101 1¹⁹⁄₃₂" ⁵⁄₃₂" 69-0648(1¹¹⁄₃₂")

2 56-2102 1⁷⁄₈" ⁵⁄₃₂" 69-0648(1¹⁹⁄₃₂")

3, 4 56-4103 2³⁄₃₂" ⁵⁄₃₂" 69-1248(1¹³⁄₃₂")

5 56-6105 2¹⁵⁄₃₂" ⁵⁄₃₂" 69-2248(2³⁄₃₂")

6 56-6106 2¹¹⁄₁₆" ⁵⁄₃₂" 69-2248(2¹¹⁄₃₂")

7 56-6106 2¹⁸⁄₃₂" ⁵⁄₃₂" 69-2248(2¹¹⁄₁₆")

8 56-8108 2¹¹⁄₁₆" ¹⁄₄" 69-2648(3³⁄₁₆")

G & G 6N 56-1600 1¹³⁄₁₆" ⁵⁄₁₆" 69-064812N, 14N 56-2000 2¹⁄₁₆" ³⁄₈" 69-1248

35N 56-2200 2¹⁄₁₆" ³⁄₈" 69-224844N 56-0844 2⁵⁄₈" ⁷⁄₁₆" 69-2648

Neapco N1000 56-0600 1¹⁄₂" ⁵⁄₁₆" 69-0648L600 56-1600 1¹³⁄₁₆" ⁵⁄₁₆" 69-0648

1200, 1800, 2000 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-12482200 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-22482600 56-2600 2⁷⁄₈ ¹¹⁄₃₂" 69-2648

N44, N55 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-2648

Rockwell 6R 56-1600 1¹³⁄₁₆" ⁵⁄₁₆" 69-064812R, 14R 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-1248

35R 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-224844R 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-2648

Walterscheid 2100 56-2122 1⁵⁄₈" ⁵⁄₃₂" 69-06482200, I, 2300 56-2223 1³¹⁄₃₂" ⁷⁄₃₂" 69-1248

2400 56-2324 2¹⁵⁄₃₂" ⁷⁄₃₂" 69-22482500 56-2324 2¹⁵⁄₃₂" ⁷⁄₃₂" 69-2248

Weasler 6 56-1600 1¹³⁄₁₆" ⁵�₁₆" 69-064812, 14 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-1248

35 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-224844, 55 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-2648

* Dimensions in parenthesis() denote bearing groove O.D. of inner yoke/tube assembly versus bearing groove O.D. of outeryoke/tube assembly.

ShieldLength

ShieldBell O.D.

Bearing Width

Bearing I.D.Groove

O.D.

Groove Width

World ShieldTM BearingWorld ShieldTM Shield PTO Yoke

Universal Fit Shield System

61

Bore Part Number

Collar Type

1"-15 SPL 56-0615

1³⁄₈"-6 SPL & 21 SPL 56-3001

1³⁄₄"-20 SPL 56-2669

Bore Part Number

Trailing Pin Type

1³⁄₈"-6 SPL & 21 SPL 56-1857

1³⁄₄"-20 SPL 56-2446

Style Series O.D. I.D. Width Part Number

Bearings for Rigid Plastic Shields

2pc Nylon N1000 — — ⁹⁄₃₂" 56-0604

3pc Nylon 1200,1800,2000,2200 — — ⁹⁄₃₂" 56-2004

Sleeve 2000,2200 2⁹⁄₃₂" 2" ¹⁄₄" 56-2295

Sleeve2 pc. 3 pc.

2pc N1000 2⁷⁄₆₄" 1¹⁄₂" ⁵⁄₁₆" 56-0666

1pc 1200,1800,2000,2200 2¹³⁄₁₆" 2⁵⁄₆₄" ³⁄₈" 56-2300

4pc Nylon 2600 — — ⁹⁄₃₂" 56-2604

Sleeve 1200,1800,2000,2200 2³⁄₈" 2" ¹⁄₄" 56-2294

Sleeve 2600 3⁵⁄₃₂" 2³⁵⁄₆₄" ¹⁄₄" 56-2646

Note: Shield components also service some competitor drivelines referenced on the competitorinterchangeability chart found on page 7.

Style Series O.D. I.D. Width Part Number

Bearings for Steel Shields2 pc. 1 pc. 4 pc. Sleeve

QUICK DISCONNECT REPAIR KITS

OLD STYLE SHIELD BEARINGREPLACEMENT COMPONENTS

62

Shaft Size Part Number

⁷⁄₈" 76-0013

1" 76-0015

1¹⁄₈" 76-0017

1³⁄₁₆" 76-0018

1¹⁄₄" 76-0019


³⁄₄" 78-0011

¹³⁄₁₆" 78-0012

¹⁵⁄₁₆" 78-0014

1¹⁄₈" 78-0017

1³⁄₁₆" 78-0018

1¹⁄₄" 78-0019

TypeDiameter Length Head Point Part Number

³⁄₈"-16 ¹⁄₂" Allen Cup 50-2501

³⁄₈"-16 ³⁄₄" Square Cup 50-2502

¹⁄₄"-20 ¹⁄₂" Allen Cup 50-2503

* Packaged 25 per Box

Set Screws*

Hanger Bearings: Plain Bearing

Pillow Block Bearings: Plain Bearing

MISCELLANEOUS PTO PARTS

64

Rectangular ³⁄₄" X ⁷⁄₈" N1000, L600 73-0750

Rectangular 1" X 1¹⁄₈" 1200, 1800, 2000 73-1001

Square 1³⁄₁₆" 2200 73-1188

Square 1⁵⁄₁₆" 44, 2600, 55 73-1313

Type Dimensions Series Part Number

Standard Series Shafting—72" Lengths


Standard Tubing—72" Lengths

Rectangular 1" X 1¹⁄₈" N1000, L600 70-1001

Rectangular 1¹⁄₄" X 1³⁄₈" 1200, 1800, 2000 70-1250

Round 1⁵⁄₈" X .065(16 GA) N1000, L600 70-1625

Round 2" X .083(14 GA) 1000, 1200, 1800, 2000 70-2000

Round 2¹⁄₈" X .120(11 GA) 2200 70-2125

Round 2¹⁄₄" X .120(11 GA) 2200, 44 70-2250

Round 2¹⁄₂" X .134(10 GA) 44, 55 70-2500

Round 2³⁄₄" X .109(12 GA) 44, 2600 70-2750

Round Rectangular

Rectangular Square

³⁄₄" RD ³⁄₁₆" 71-0750

¹³⁄₁₆" RD ¹⁄₄" 71-0813

⁷⁄₈" RD ¹⁄₄" 71-0875

1" RD ¹⁄₄" 71-1000

1¹⁄₄" RD ⁵⁄₁₆" 71-1250

Type Dimensions Part Number

Solid Shafting—72" Full Length Keyway

Solid Shafting—72" LengthsShaft Size Part Number

Square Hexagon

³⁄₄" SQ 72-0750

⁷⁄₈" SQ 72-0875

1" SQ 72-1000

1¹⁄₄" SQ 73-1250

⁷⁄₈" HEX 72-0888

1" HEX 72-1002

1¹⁄₈" HEX 72-1125

Round

SHAFTING & TUBING

66

2 1-0221

4 1-0421


Cross & Bearing Kits

1 2 1-01212100 2 1-10012400 2 2-2421

22200

3 2 1-03214

23005 2 2-0521

Quick Disconnect Yokes (6 spline)

{ }

{ }

1 8-2012-AR

1 8-4012-AR


1 1 8-1012-AR2100 1 8-2112-AR2400 1 8-2412-AR

22200

3 1 8-3012-AR4

23005 1 8-5012-AR

{ }

{ }

METRIC AG RACK

Bondioli & Pavesi Series: 1 - 5 Walterscheid Series: 2100,2200,I,2300,2400

For additional shaft and shield safetylabels, please refer to pages 4 and 5.

Shield Safety labelPart Number NA-7232

Shaft Safety labelPart Number NA-10666

Services Popular Bondioli & Pavesi and Walterscheid Style Drivelines

67

Series Quantity Part Number Series Description Quantity Part Number

1 1 8-1030-AR2 1 8-2030-AR3 1 8-3030-AR4 1 8-4030-AR5 1 8-5030-AR

2100 1 8-2130-AR2200 1 8-2230-AR

I 1 8-0130-AR2300 1 8-2330-AR2400 1 8-2430-AR

Inner Profile Tubes—59" Lengths1 1 70-01052 1 70-02053 1 70-03054 1 70-04055 1 70-0505

2100 1 70-21052200 1 70-22052400 1 70-2405

Inner Profile Yokes End Yokes

1 1" RD Bore 1 8-1008-AR1 1¹⁄₄" RD Bore 1 8-1010-AR2

22002

2200I33 1¹⁄₄" RD Bore 1 8-3010-AR4

23004

23005 1¹⁄₄" RD Bore 1 8-5010-AR5 1³⁄₈" RD Bore 1 8-5011-AR

2100 1" RD Bore 1 8-2108-AR2100 1¹⁄₄" RD Bore 1 8-2110-AR2400 1³⁄₈" RD Bore 1 8-2411-AR

Tube Pin—10 per box8mm X 50mm 1 50-01128mm X 60mm 1 50-04128mm X 65mm 1 50-2212

10mm X 65mm 1 50-231210mm X 75mm 1 50-0512

Outer Profile Tubes—59" Lengths1 1 70-01042 1 70-03053 1 70-03045 1 70-0504

2100 1 70-21042200 1 70-22042400 1 70-2404

1 1 8-1020-AR2 1 8-2020-AR3 1 8-3020-AR4 1 8-4020-AR5 1 8-5020-AR

2100 1 8-2120-AR2200 1 8-2220-AR

I 1 8-0120-AR2300 1 8-2320-AR2400 1 8-2420-AR

Outer Profile Yokes

{ }{ }

1" RD Bore 1 8-2008-AR

1¹⁄₄" RD Bore 1 8-2010-AR

{ }{ }

1¹⁄₄" RD Bore 1 8-4010-AR

1³⁄₈" RD Bore 1 8-4011-AR

{ } 1" RD Bore 1 8-3011-AR

Plastic Shields1,2,2100 1 69-0640-MR3,4,2200,I,2300 1 69-1240-MR5,6,2400 1 69-2240-MR

Shield Bearings1 1 56-21012 1 56-2102

3,4 1 56-41035 1 56-61056 1 56-6106

2100 1 56-21222200,I,2300 1 56-2223

2400 1 56-2324

Metric AG Rack 99-0195

Complete Display

Bondioli & Pavesi Series: 1 - 5Walterscheid Series: 2100,2200,I,2300,2400

METRIC AG RACKServices Popular Bondioli & Pavesi and Walterscheid Style DrivelinesServices Popular Bondioli & Pavesi and Walterscheid Style Drivelines

68

1 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number22.0 ⁷⁄₈" 54.0 2¹⁄₈" 1-0121


Tractor Yokes: Pin Type Quick Disconnect

(L)Bore Length Use W/Tube

mm inches mm inches Part Number Part Number

Inner Profile Yoke

O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number

26.6 1³⁄₆₄" 3.5 ⁹⁄₆₄" 8-1030 70-0105

Inner Profile Tube—59" Lengths(L)

22.0

54.0

L

L

L

L



Outer Profile Yoke

L

26.5 1¹⁄₃₂" 79.0 3³⁄₃₂" 70-0105 8-1030

32.5 1⁹⁄₃₂" 80.0 3⁵⁄₃₂" 70-0104 8-1020

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 92.0 3⁵⁄₈" 56-0040 8-1012

1³⁄₈"-21 SPL 92.0 3⁵⁄₈" 56-0040 8-1021


Replaces Bondioli & Pavesi® Design Series 1

ASAECategory 1METRIC

69

(L)Diameter Length

mm inches mm inches Part Number

Tube Pin

(L)Bore Length Hole

mm inches mm inches Keyway SIze Part Number

Implement Yokes

1 SERIES

L

L


32.4 1⁹⁄₃₂" 2.475 ³⁄₃₂" 8-1020 70-0104

Outer Profile Tube—59" Lengths(L)

L

8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412

Note: Fits both inner and outer profile yokes - packaged 10 per box

25.4 1" 79.0 3⁹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-1008

31.75 1¹⁄₄" 79.0 3⁹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-1010

Overall Length Bell O.D. Part Number

51" 5¹⁄₄" 69-0648

Shield Bearings are not included

World ShieldTM Plastic



1¹⁹⁄₃₂" ⁵⁄₃₂"1¹¹⁄₃₂" ⁵⁄₃₂"


69-0648 56-2101

L

O.D.

O.D.

Replaces Bondioli & Pavesi® Design Metric Series 1

70

2 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number23.8 ¹⁵⁄₁₆" 61.3 2¹³⁄₃₂" 1-0221





Inner Profile Yoke


29.0 1⁹⁄₆₄" 4.0 ⁵⁄₃₂" 8-2030 70-0205


23.8

61.3

L

L

L

L



Outer Profile Yoke

L

29.0 1⁹⁄₆₄" 82.0 3⁷⁄₃₂" 70-0205 8-2030

36.0 1¹³⁄₃₂" 84.0 3⁵⁄₁₆" 70-0305 8-2020

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2012

1³⁄₈"-21 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2021




71

2 SERIES

Tube Pin

(L)Bore Length Hole

mm inches mm inches Keyway Size Part Number

Implement Yokes

L

L


36.1 1²⁷⁄₆₄" 3.1 ¹⁄₈" 8-2020 70-0305


L

8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412


(L)Diameter Length


25.4 1" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2008

31.75 1¹⁄₄" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2010


51" 5¹⁄₄" 69-0648





1⁷⁄₈" ⁵⁄₃₂"1¹⁹⁄₃₂" ⁵⁄₃₂"


69-0648 56-2102

L

O.D.

O.D.


72

3 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 70.0 2³⁄₄" 1-0321





Inner Profile Yoke


36.1 1²⁷⁄₆₄" 3.1 ¹⁄₈" 8-3030 70-0305


27.0

70.0

L

L

L



Outer Profile Yoke

L

36.0 1²⁷⁄₆₄" 85.0 3³⁄₈" 70-0305 8-3030

43.5 1¹¹⁄₁₆" 80.0 3⁵⁄₃₂" 70-0304 8-3020

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 102.0 4¹⁄₆₄" 56-0040 8-3012

1³⁄₈"-21 SPL 102.0 4¹⁄₆₄" 56-0040 8-3021




73

3 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


43.4 1⁴⁵⁄₆₄" 3.325 ¹⁄₈" 8-3020 70-0304


L

8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412


25.4 1" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3011

31.75 1¹⁄₄" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3010

34.93 1³⁄₈" 85.0 3¹¹⁄₃₂" — ¹⁷⁄₃₂" D.T. 8-3016

Overall Length Bell O.D. Part Number51" 6¹⁄₈" 69-1248





2³⁄₃₂" ⁵⁄₃₂"1¹³⁄₁₆" ⁵⁄₃₂"


69-1248 56-4103

L

O.D.

O.D.


74

4 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 74.6 2¹⁵⁄₁₆" 1-0421





Inner Profile Yoke


36.1 1²⁷⁄₆₄" 4.45 ¹¹⁄₆₄" 8-4030 70-0405


27.0

74.6

L

L

L



Outer Profile Yoke

L

36.0 1²⁷⁄₆₄" 98.0 3⁵⁵⁄₆₄" 70-0405 8-4030

43.5 1¹¹⁄₁₆" 93.5 3¹¹⁄₁₆" 70-0304 8-4020

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4012

1³⁄₈"-21 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4021




75

4 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


43.4 1⁴⁵⁄₆₄" 3.4 ¹⁄₈" 8-4020 70-0304


L

8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412


31.75 1¹⁄₄" 98.0 3⁵⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-4010

34.93 1³⁄₈" 98.0 3⁵⁵⁄₆₄" ⁵⁄₁₆" ³⁄₈"-16 8-4011

34.93 1³⁄₈" 98.0 3⁵⁵⁄₆₄" — ¹⁷⁄₃₂" D.T. 8-4016


51" 6¹⁄₈" 69-1248





2³⁄₃₂" ⁵⁄₃₂"1¹³⁄₁₆" ⁵⁄₃₂"


69-1248 56-4103

L

O.D.

O.D.


76

5 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number30.2 1³⁄₁₆" 80.0 3⁵⁄₃₂" 2-0521





Inner Profile Yoke


44.7 1⁴⁹⁄₆₄" 4.0 ⁵⁄₃₂" 8-5030 70-0505


30.2

80.0

L

L

L



Outer Profile Yoke

L

45.0 1²⁵⁄₃₂" 96.0 3²⁵⁄₃₂" 70-0505 8-5030

51.6 2¹⁄₃₂" 98.5 3⁷⁄₈" 70-0504 8-5020

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 112.0 4¹³⁄₃₂" 56-0040 8-5012

1³⁄₈"-21 SPL 112.0 4¹³⁄₃₂" 56-0040 8-5021




77

5 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


51.3 2¹⁄₆₄" 3.0 ⁷⁄₆₄" 8-5020 70-0504


L

10.0 ²⁵⁄₆₄" 70.0 2³⁄₄" 50-0612


31.75 1¹⁄₄" 96.0 3²⁵⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-5010

34.93 1³⁄₈" 96.0 3²⁵⁄₃₂" ⁵⁄₁₆" ³⁄₈"-16 8-5011

34.93 1³⁄₈" 96.0 3²⁵⁄₃₂" — ¹⁷⁄₃₂" D.T. 8-5016


51" 7¹⁄₁₆" 69-2248





2¹⁵⁄₃₂" ⁵⁄₃₂"2³⁄₃₂" ⁵⁄₃₂"


69-2248 56-6105

L

O.D.

O.D.


78

6 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number30.2 1³⁄₁₆" 92.0 3⁵⁄₈" 3-0621





Inner Profile Yoke


44.7 1⁴⁹⁄₆₄" 4.0 ⁵⁄₃₂" 8-6030 70-0505


30.2

92.0

L

L

L



Outer Profile Yoke

L

45.0 1²⁵⁄₃₂" 105.0 4¹⁄₈" 70-0505 8-6030

54.0 2¹⁄₈" 107.0 4⁷⁄₃₂" 70-0704 8-6020

O.D.

(L)Length QD


1³⁄₈"-21 SPL 122.0 4¹³⁄₁₆" 56-0040 8-6021




79

6 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


53.6 2⁷⁄₆₄" 3.775 ⁵⁄₃₂" 8-6020 70-0704


L

10.0 ²⁵⁄₆₄" 70.0 2³⁄₄" 50-0612


31.75 1¹⁄₄" 105.0 4⁹⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-6010

34.93 1³⁄₈" 105.0 4⁹⁄₆₄" ⁵⁄₁₆" ³⁄₈"-16 8-6011

34.93 1³⁄₈" 110.0 4¹¹⁄₃₂" — ¹⁷⁄₃₂" D.T. 8-6016


51" 7¹⁄₁₆" 69-2248





69-2248 56-6106

L

O.D.

O.D.

2¹¹⁄₁₆" ⁵⁄₃₂"2¹¹⁄₃₂" ⁵⁄₃₂"



80

7 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number35.0 1³⁄₈" 94.0 3¹¹⁄₁₆" 3-0721





Inner Profile Yoke


44.7 1³⁄₄" 5.5 ⁷⁄₃₂" 8-7030 70-0705


35.0

94.0

L

L

L



Outer Profile Yoke

L

45.0 1³⁄₄" 105.0 4¹⁄₈" 70-0705 8-7030

54.0 2¹⁄₈" 107.0 4⁷⁄₃₂" 70-0704 8-7020

O.D.

1³⁄₈"-6 SPL 122.0 4¹³⁄₁₆" 56-0040 8-7012

1³⁄₈"-21 SPL 122.0 4¹³⁄₁₆" 56-0040 8-7021

1³⁄₄"-20 SPL 122.0 4¹³⁄₁₆" 56-0940 8-7014


(L)Length QD

Bore mm inches Pin Kit Part Number



81

7 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length

mm inches mm inches Keyway Set Screw Part Number

Implement Yokes

L

L


53.6 2⁷⁄₆₄" 3.775 ⁵⁄₃₂" 8-7020 70-0704


L

10.0 ²⁵⁄₆₄" 80.0 3⁵⁄₃₂" 50-1080


35.0 1³⁄₈" 105.0 4¹⁄₈" ⁵⁄₁₆" ³⁄₈"-16 8-7011


51" 8" 69-2248





2¹¹⁄₁₆" ⁵⁄₃₂"2¹¹⁄₃₂" ⁵⁄₃₂"


69-2248 56-6106

L

O.D.

O.D.


82

8 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number35.0 1³⁄₈" 106.5 4³⁄₁₆" 3-0821





Inner Profile Yoke

O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Number Number

53.6 2⁷⁄₆₄" 3.775 ⁵⁄₃₂" 8-8030 70-0704


35.0

106.5

L

L

L



Outer Profile Yoke

L

54.0 2¹⁄₈" 120.0 4²³⁄₃₂" 70-0704 8-8030

63.0 2¹⁄₂" 120.0 4²³⁄₃₂" 70-0804 8-8020

O.D.

1³⁄₈"-6 SPL 125.0 4⁵⁹⁄₆₄" 56-0040 8-8012

1³⁄₈"-21 SPL 125.0 4⁵⁹⁄₆₄" 56-0040 8-8021

1³⁄₄"-20 SPL 125.0 4⁵⁹⁄₆₄" 56-0940 8-8014


(L)Length QD

Bore mm inches Pin Kit Part Number



83

8 SERIES

(L)Diameter Length


Tube Pin

L


63.0 2¹⁄₂" 4.0 ⁵⁄₃₂" 8-8020 70-0804


L

12.0 ¹⁵⁄₃₂" 80.0 3⁵⁄₃₂" 50-1280


O.D.

O.D.

(L)Bore Length

mm inches mm inches Keyway Set Screw Part Number

Implement Yokes

L

35.0 1³⁄₈" 120.0 4²³⁄₃₂" ⁵⁄₁₆" ³⁄₈"-16 8-8011

38.0 1¹⁄₂" 120.0 4²³⁄₃₂" ⁵⁄₁₆" ³⁄₈"-16 8-8015

44.5 1³⁄₄" 120.0 4²³⁄₃₂" ³⁄₈" ³⁄₈"-16 8-8016


51" 8" 69-2648





2¹¹⁄₁₆" ¹⁄₄"3³⁄₁₆" ¹⁄₄"


69-2648 56-8108

L


84

9 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number41.0 1³⁹⁄₆₄" 108.0 4¹⁄₄" 3-0921


10 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number41.0 1³⁹⁄₆₄" 118.0 4⁵⁄₈" 3-1021


41.0

41.0

108.0

118.0


METRIC


METRIC

85

2100 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number22.0 ⁷⁄₈" 54.8 2⁵⁄₃₂" 1-1001





Inner Profile Yoke


23.5 ⁵⁹⁄₆₄" 3.6 ⁹⁄₆₄" 8-2130 70-2105


55.0

22.0

L

L

O.D.

L



Outer Profile Yoke

L

O.D.

23.5 ⁵⁹⁄₆₄" 79.0 3⁷⁄₆₄" 70-2105 8-2130

30.0 1³⁄₁₆" 79.0 3⁷⁄₆₄" 70-2104 8-2120

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 92.0 3⁵⁄₈" 56-0040 8-2112

1³⁄₈"-21 SPL 92.0 3⁵⁄₈" 56-0040 8-2121


Replaces Walterscheid® Design Series 2100


86

2100 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length

mm inches mm inches Hole Size Part Number

Implement Yokes

O.D.

L

L

30.0 1³⁄₁₆" 2.85 ⁷⁄₆₄" 8-2120 70-2104

L



8.0 ⁵⁄₁₆" 50.0 1³¹⁄₃₂" 50-0112


25.4 1" 79.0 3⁷⁄₆₄" ⁵⁄₁₆" D.T. 8-2108

31.75 1¹⁄₄" 79.0 3⁷⁄₆₄" ³⁄₈" D.T. 8-2110


51" 5¹⁄₄" 69-0648





1²¹⁄₃₂" ⁵⁄₃₂" 69-0648 56-2122


L

Replaces Walterscheid® Design Metric Series 2100

87

2200 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number23.8 ¹⁵⁄₁₆" 61.3 2¹³⁄₃₂" 1-0221





Inner Profile Yoke


34.5 1²³⁄₆₄" 3.95 ⁵⁄₃₂" 8-2230 70-2205


61.3

23.8

L

L

L



Outer Profile Yoke

L

34.5 1²³⁄₆₄" 82.0 3¹⁵⁄₆₄" 70-2205 8-2230

41.25 1⁵⁄₈" 82.0 3¹⁵⁄₆₄" 70-2204 8-2220

O.D.

O.D.

(L)Length QD


1³⁄₈"-21 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2021




88

2200 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


41.25 1⁵⁄₈" 2.85 ⁷⁄₆₄" 8-2220 70-2204


L

10.0 ¹³⁄₃₂" 65.0 2²³⁄₆₄" 50-2212


25.4 1" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2008

31.75 1¹⁄₄" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2010

Overall Length Bell O.D. Part Number51" 6¹⁄₈" 69-1248





2" ⁵⁄₃₂" 69-1248 56-2223


L

O.D.


89

I SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 70.0 2³⁄₄" 1-0321





Inner Profile Yoke


34.5 1²³⁄₆₄" 3.95 ⁵⁄₃₂" 8-0130 70-2205


70.0

27.0

L

L

L



Outer Profile Yoke

L

34.5 1²³⁄₆₄" 85.0 3¹¹⁄₃₂" 70-2205 8-0130

41.25 1⁵⁄₈" 85.0 3¹¹⁄₃₂" 70-2204 8-0120

O.D.

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 102.0 4¹⁄₆₄" 56-0040 8-3012

1³⁄₈"-21 SPL 102.0 4¹⁄₆₄" 56-0040 8-3021


Replaces Walterscheid® Design Series I


90

I SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


41.25 1⁵⁄₈" 2.85 ⁷⁄₆₄" 8-0120 70-2204


L

10.0 ¹³⁄₃₂" 65.0 2⁹⁄₁₆" 50-2312


25.4 1" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3011

31.75 1¹⁄₄" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3010

35.0 1³⁄₈" 85.0 3¹¹⁄₃₂" — ³⁄₈" D.T. 8-3016


51" 6¹⁄₈" 69-1248





2" ⁵⁄₃₂" 69-1248 56-2223


L

O.D.

Replaces Walterscheid® Design Metric Series I

91

2300 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 74.6 2¹⁵⁄₁₆" 1-0421





Inner Profile Yoke


34.5 1²³⁄₆₄" 3.95 ⁵⁄₃₂" 8-2330 70-2205


27.0

74.6

L



Outer Profile Yoke

34.5 1²³⁄₆₄" 98.0 3⁵⁵⁄₆₄" 70-2205 8-2330

41.25 1⁵⁄₈" 98.0 3⁵⁵⁄₆₄" 70-2204 8-2320

L

L

L

O.D.

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4012

1³⁄₈"-21 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4021




92

2300 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


41.25 1⁵⁄₈" 2.85 ⁷⁄₆₄" 8-2320 70-2204


10.0 ¹³⁄₃₂" 65.0 2⁹⁄₁₆" 50-2312


31.75 1¹⁄₄" 98.0 3⁵⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-4010

34.93 1³⁄₈" 98.0 3⁵⁵⁄₆₄" ⁵⁄₁₆" ³⁄₈"-16 8-4011


51" 6¹⁄₈" 69-1248





2" ⁵⁄₃₂" 69-1248 56-2223


L

O.D.

L


93

2400 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number32.0 1¹⁷⁄₆₄" 76.0 3" 2-2421





Inner Profile Yoke


39.5 1⁹⁄₁₆" 4.5 ¹¹⁄₆₄" 8-2430 70-2405


76.0

32.0

L

L

O.D.

L



Outer Profile Yoke

L

39.5 1⁹⁄₁₆" 96.0 3²⁵⁄₃₂" 70-2405 8-2430

48.0 1⁵⁷⁄₆₄" 96.0 3²⁵⁄₃₂" 70-2404 8-2420

O.D.

(L)Length QD

Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 112.0 4¹³⁄₃₂" 56-0040 8-2412

1³⁄₈"-21 SPL 112.0 4¹³⁄₃₂" 56-0040 8-2421




94

2400 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L


48.0 1⁵⁷⁄₆₄" 3.8 ⁵⁄₃₂" 8-2420 70-2404


L

10.0 ¹³⁄₃₂" 75.0 ⁶¹⁄₆₄" 50-0512


31.75 1¹⁄₄" 96.0 3²⁵⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-2410

34.93 1³⁄₈" 96.0 3²⁵⁄₃₂" — ¹⁄₂" D.T. 8-2411


51" 7¹⁄₁₆" 69-2248





2¹⁄₂" ³⁄₁₆" 69-2248 56-2324


L

O.D.


95

2500 SERIES

Bearing Diameter Overall Lengthmm inches mm inches Part Number36.0 1.417" 89.0 3¹⁄₂" 3-2521



89.0

36.0



Inner Profile Yoke


51.0 2" — — 8-2530 70-2505


L



Outer Profile Yoke

51.0 2" 105.0 4¹⁄₈" 70-2505 8-2530

61.0 2¹³⁄₃₂" 105.0 4¹⁄₈" 70-2504 8-2520

LO.D.

LO.D.

LO.D.

(L)Length QD


1³⁄₈"-21 SPL 122.0 4¹³⁄₁₆" 56-0040 8-2521

1³⁄₄"-20 SPL 122.0 4¹³⁄₁₆" 56-0940 8-2514




96

2500 SERIES

(L)Diameter Length


Tube Pin

(L)Bore Length Hole


Implement Yokes

L

L

(L)Bore Length

mm inches mm inches Drill Thru Part Number

Shear Pin Yokes


61.0 2¹³⁄₃₂" 4.5 ¹¹⁄₆₄" 8-2520 70-2504


10.0 ¹³⁄₃₂" 90.0 3¹⁄₂" 50-1090


34.93 1³⁄₈" 105.0 4¹⁄₈" ³⁄₈" ³⁄₈"-16 8-2511

38.1 1¹⁄₂" 105.0 4¹⁄₈" ³⁄₈" ³⁄₈"-16 8-2515

35.0 1³⁄₈" 105.0 4¹⁄₈" ¹⁄₂" D.T. 8-2525

38.1 1¹⁄₂" 105.0 4¹⁄₈" ¹⁄₂" D.T. 8-2535


51" 8" 69-2248





2¹⁄₂" ³⁄₁₆" 69-2248 56-2324


L

L

O.D.

LO.D.


97

AUXILIARY POWER TAKE-OFFDRIVESHAFTS AND COMPONENTS

ForTruck Mounted and Industrial

Applications

98

GENERAL SAFETY INFORMATION

To prevent injury to yourself and/or damage to theequipment:

➤ Read all owner’s manuals, service manuals,and/or other instructions

➤ Always follow proper procedures and useproper tools and safety equipment

➤ Be sure to receive proper training

➤ Never work alone while under a vehicle orwhile repairing or maintaining equipment

➤ Always use proper components inapplications for which they are approved

➤ Be sure to assemble components properly

➤ Never use worn-out or damaged components

➤ Always block any raised or moving device that mayinjure a person working on or under a vehicle

➤ Never operate the controls of the power take-off orother driven equipment from any position that couldresult in getting caught in the moving machinery

➤ Rotating auxiliary driveshafts are dangerous. Youcan snag clothes, skin, hair, hands, etc. This cancause serious injury or death.

➤ Do not go under vehicle when the engine isrunning.

➤ Do not work on or near an exposed shaft when theengine is running.

➤ Shut off engine before working on power take-off ordriven equipment.

➤ Exposed rotating driveshafts must be guarded.

�! WARNING: ROTATING AUXILIARYDRIVESHAFTS

Auxiliary driveshafts may be installed with eitherrecessed or protruding set screws. If you choose asquare head set screw, you should be aware that it willprotrude above the hub of the yoke and may be a pointwhere clothes, skin, hair, hands, etc. could besnagged. A socket head set screw, which may notprotrude above the hub of the yoke, does not permitthe same amount of torquing as does a square headset screw. Also, a square head set screw, if used witha lock wire, will prevent loosening of the screw causedby vibration. Regardless of the choice made withrespect to a set screw, an exposed rotating auxiliarydriveshaft must be guarded.

If an auxiliary driveshaft is used and remains exposedafter installation, it is the responsibility of the vehicledesigner and P.T.O. installer to install a guard.Auxiliary Power Take-Off Safety shielding systems areavailable in this catalog. Shields must be used if thedriveshaft is not covered in its location.

�! WARNING: GUARDING AUXILIARYDRIVESHAFTS �! WARNING: USING SET SCREWS

This symbol warns of possible personal injury�!

SAFETY INFORMATION

AUXILIARY POWER TAKE-OFF TECHNICAL INFORMATION

POWER-TAKE-OFF (P.T.O.) BASICS

An auxiliary power-take-off shaft transmits power from the source to the driven accessory. Theshaft must be capable of transmitting the peak torque and maximum R.P.M. required by theaccessory, while withstanding any shock loads. The information in this publication is focused onN1000 and N1310 series auxiliary power-take-off products.

An auxiliary power shaft operates through constantly changing angles between the powersource and the driven accessory. Chassis twisting and power train deflections due to torquecontribute to these changes in operating angles. This deflection also will cause changes in thelength of the auxiliary power shaft. Including a slip member (slip yoke and spline stub shaft) inthe driveline system accommodates this.

Joint operating angles are very important considerations in the configuration of an auxiliarypower-take-off application. The service life of the universal joint is directly affected by theoperating angles experienced in the completed system. Guidelines for permissible operatingangles are identified in the accompanying chart.

SPECIFYING SHAFT TYPE

Applications in auxiliary PTO use either solid shafting or tubular driveshaft assemblies.

Neapco tubular auxiliary PTO shaft kits are manufactured using 2” diameter by .083” wall(2” x .083) tubing. These unwelded assemblies are convenient for fabricating different lengthdriveshaft requirements as needed. Neapco recommends using tubular auxiliary PTO shaftswhenever possible. Neapco tubular shafts are designed to reduce vibration as a dynamicallybalanced assembly. Minimizing vibration increases the service life of the driveshaft, universaljoints, bearings in the driving and driven units and helps keep end connections secure.

Solid shafting should only be used in auxiliary power-take-off applications designed for 1,000R.P.M. or less intermittent service.

INSTALLING A P.T.O. DRIVELINE

When installing a remote-mount PTO, one requiring a propeller shaft (driveline), please observethat there is a slight angle of inclination to the engine, and that you must install the driven shaftof the pump parallel to the PTO output shaft. In addition, the yokes of the PTO driveshaft shouldbe in line, in phase, and in the same plane.

UNIVERSAL JOINT OPERATING ANGLES

SHAFT RPM SHAFT RPMMAXIMUM NORMALOPERATING ANGLE

MAXIMUM NORMALOPERATING ANGLE

500 17° 2500 7°1000 17° 3000 6°1500 11° 3500 5°2000 8° 4000 4°

AUXILIARY POWER TAKE-OFF TECHNICAL INFORMATION

Some light-duty under body hoist applications use a pump and tank combination, and thereare many large tank trucks which have pneumatic blowers. Both require a level horizontalinstallation, making parallel input and output shafts difficult to configure. The correct remedyfor this common driveline problem is to use a two-piece driveshaft. In close-coupled applica-tions a center yoke assembly may be necessary to provide correct phasing and angularity.

To properly measure the driveline angle, use an inclinometer, or bubble protractor to deter-mine TRUE JOINT ANGLE, which is a composite of vertical and horizontal components. Thiscan also be calculated by measuring and using trigonometry. We recommend that you installwith at least a two-degree angle, to insure that oscillations will properly rotate the needlebearings in the u-joints.

If a long driveshaft is necessary then critical speed problems must be taken into consideration.The solution is to use more than one driveshaft, installed with center support bearing assem-blies, and design the driveshaft lengths to avoid critical and half-critical speeds. Usually thebest solution is to install 60% of the driveline closest to the source of power, or the driving end,with the remaining 40% toward the driven end. Pillow blocks, flange bearings or hanger bear-ings used in two-piece driveshafts must be mounted solidly to the chassis.

WHERE TO INSTALL THE SLIP JOINTS

The purpose of the slip joint (slip yoke and spline stub shaft) is to allow proper flexing of theuniversal joints as they rotate through the entire circle of operation. If a slip joint is not installed,or if it is corroded from lack of lubricant, then severe stresses are imposed upon the bearingsand seals in the PTO and pump. An additional purpose of the slip joint is to allow flexing of thechassis without putting lateral loads on the bearings and seals. Bearing and seal damage inPTOs and pumps, and overheating is nearly always attributable to driveline problems.

Our recommendation is that if you have enough space, the slip joint should be installed onthe end closest to the PTO. If the PTO is inadvertently left in gear, the slip joint may leavethe shaft during overspeeding, or operating above critical speed. The shorter shaft is lesslikely to destroy the entire underside of the vehicle.

CAUSES OF DRIVELINE FAILURES

To review u-joint and driveline problems, most failures will be a result of one or more of thefollowing:

· TOO MUCH TORQUE OR HP REQUIREMENT· LACK OF LUBRICANT OR DIRTY LUBRICANT· HIGH DEGREE OF ANGULARITY· U-JOINTS NOT IN PHASE· U-JOINTS NOT PARALLEL· DRIVELINE NOT ALLOWED TO SLIP· DRIVELINE OUT OF BALANCE

If you must use a driveline, it is our recommendation that you use tubular assemblies, and thatyou purchase from a certified driveline specialist.


NEAPCO AUXILIARY P.T.O. DRIVESHAFT SHIELDING SYSTEM

Neapco, Inc. has developed an Auxiliary P.T.O. Driveshaft shield System that iscompatible with many 1000 and 1310 Series power-take-off applications. The system consistsof four (4) basic components that combine to form a total driveline enclosure system.

1) A series of Bearing Races (collars) for installation on the driveshaft assembly by tackwelding.

2) Flex Bell™ Yoke Enclosures with over 8” of coverage featuring fluted construction for easylength adjustment by cutting, providing custom installations.

3) Inner (2.75” O.D.) and Outer (3.00” O.D.) Telescoping Plastic Shield Tubes complete withbearing slots (4) and Danger Label. Designed for easy length adjustment by cutting todesired length with bearing slots aligned with bearing races (collars) mounted on thedriveshaft. These shields must overlap (telescope) at least 5” or more, if design allows. Toaccomplish this the shield tube should be cut at least 2 1/2” past the center of the driveshaftwith the bearing slots aligned with the bearing race (collars) on the driveshaft.

4) Inner (4) and Outer (4) Shield Bearing Sets. These bearing sets lock the Flex Bell™ YokeEnclosure to the mating shield tube through the aligned slots and ride in the bearing raceson the driveshaft collars.

Assembly is easily accomplished after a short orientation to the system. Disassembly (forservice work or lubrication) takes only a few minutes with a blade screwdriver.

Shield Bearings must be installed properly in regards to the rotation of the driveline. This pre-vents the Shield Bearings from loosening or popping out of the Bearing slots.

102

Consists of:1) FB-275-SP Bell4) FN-275 Shield Bearing

Consists of:1) FB-300-SP Bell4) FN-300 Shield Bearing

FB-275-SP Replacement Bell Kit FB-300-SP Replacement Bell Kit

FB-300-SP FN-300-4

PT-3.00-60.00

2294-4

PT-2.75-60.00

FN-275-4 FB-275-SP

68-0275 68-0300

FB-N1000 Shield Kit

68-1000

3.00 2.75

10.22

8.28

4.00 5.00

3.25 3.00

10.22

8.22

4.00

5.00

FN-275-4 FN-300-4

Consists of:1) FB-275-SP Bell1) FB-300-SP Bell1) PT-2.75-60.00" Inner Shield Tube1) PT-3.00-60.00" Outer Shield Tube4) FN-275 Shield Bearing4) FN-300 shield Bearing1) 2294-4 Shield Support Bearing1) FBIS-99.6 Instruction Sheet

AUXILIARY P.T.O. DRIVESHAFT SHIELDING SYSTEM

103

N10270-SF

N10271-SF

7.48 COLLAPSED

YOKE & STUB SHAFT ASSEMBLY

59.91

YOKE & TUBE ASSEMBLY

10-0699Midship Stub Shaft 1" DiameterMidship Stub w/ 1/4" Key for2" X 0.83 Tubing

Unwelded Driveshaft AssemblyN1000 Series w/ 2" Tubing

Unwelded Driveshaft MidshipApplication N1000 Series w/ 2" Tubing

10-0493YOKE

.25 KEYWAY

1.00

.50 2.50

10-0699STUB SHAFT

5.13

5.88 59.91

11-5914 YOKE &TUBE ASSEMBLY

.252

.852

.998

2.13FULL KEYWAY

4.13

5.13

5.88

2.25 BAR STOCK

Mounting Collars

2.25

.59 A

1.0101.000

1.1351.125

1.2801.270

1.6151.605

1.7701.760

1.9051.895

2.0302.020

2-1000

2-1125

2-1250

2-1625*

2-1750

2-1880**

2-2030

BOXEDPART NUMBERA

* Fits N10-0318

** Fits N2-3-128KX

AUXILIARY P.T.O. DRIVESHAFT SHIELDING SYSTEM

104

DangerRotating Driveline

Applicable safety standards require awarning label be affixed to the outer sectionof the driveline safety shield, to remind theoperator that it should not be in operationuntil the following conditions have beenmet.

1. All Driveline, and Equipment Shieldsare in place

2. The Driveline is properly and securelyattached at both ends.

3. The Driveline Shields turn freely. Anydeviation from this standard could resultin a serious injury or death.

The label, part number NA-7232, shouldbe affixed to the outer shield with the topone (1") inch from the bell as shown in thediagram below.

Note: Applicable safety standardsrequire that all drivelines beshielded with legible label in place.When maintaining and repairingAuxiliary PTO drivelines, use thedesignated label part numbers topurchase replacements.

SAFETY INFORMATION

SAFETY INFORMATION


Part NumberNA-7232

104

Flex Bells™ should be cut tolength that will provide completecoverage of end yoke connection

105

DangerGuard Missing

DO NOT OPERATEApplicable safety standards require theuse of warning labels on the driveshaftwhen the safety shields have beenremoved. We recommend that label partnumber NA-10666 be adhered to the tubeend of the driveshaft, one (1") inch from theedge of the yoke, with the side of the labeltoward the yoke. (See diagram below) Atthis point, the label will be readily visible atall times.

Serious injury or even death can result byoperating equipment without the propersafety shield in place. DO NOT operateyour equipment without safety shields beinginstalled on the driveshaft.

Note: A high percentage of alldriveline injuries occur when safetyshielding is missing or notfunctional. It is necessary for theuser to maintain proper shieldingand safety labels on the drivelines.

SAFETY INFORMATION

SAFETY INFORMATION


Part NumberNA-10666

105

106

C DCenterline Set Screw

Square to End Hub Distance to End YokeBore of Hub Diameter Hole Size Location End of Hub Part Number

N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)

.750 2.500 1.625 .375-16 GAP .500 10-0422

.875 1.688 1.625 .375-16 EAR .438 10-1707

.875 2.500 1.625 .375-16 GAP .625 10-04121.000 2.500 2.250 .375-16 GAP .625 10-0452

replaces Spicer® 10-4-52


Hexagon to End Hub Distance to End YokeBore of Hub Diameter Hole Size Location End of Hub Part Number


.875 2.500 2.250 .375-16 GAP .625 10-4282replaces Spicer® 10-4-282

1.125 2.500 2.250 .375-16 GAP .500 10-0432replaces Spicer® 10-4-32

A L

B

D C


Rectangular to End Hub Distance to End YokeBore of Hub Diameter Hole Size Location End of Hub Part Number


1.000X1.125 2.500 2.250 — — — N10-1559

A L

B

D C

C

A L

B

D

C

END YOKESInside Snap Ring

107

C DSet Screw

Centerline DistanceRound to End Hub Keyway to End End YokeBore of Hub Diameter Width Location Hole Size Location of Hub Part Number


.625 1.688 1.625 .188 GAP .37516 EAR .438 10-1708

.625 2.500 1.625 .188 GAP .375-16 EAR .500 N10-4373

.750 1.688 1.625 .188 GAP .375-16 EAR .438 10-1700

.750 2.500 1.625 .250 GAP .375-16 GAP .500 10-0423replaces Spicer® 10-4-23

.750 2.500 1.625 .188 GAP (2).375-16 EAR .500 10-4133replaces Spicer® 10-4-133


.812 1.688 1.625 .250 GAP .375-16 EAR .438 10-1702


.812 2.500 1.625 .250 GAP .375-16 EAR .500 10-4173replaces Spicer® 10-4-173


.875 1.688 1.625 .250 EAR .375-16 GAP .438 10-4703replaces Spicer® 10-4-703

.875 2.500 1.625 .250 GAP .375-16 EAR .500 10-4453replaces Spicer® 10-4-453



.938 2.500 1.625 .250 EAR .375-16 EAR .500 10-0473replaces Spicer® 10-4-73

1.000 1.688 1.625 .250 GAP .375-16 EAR .438 10-17051.000 2.500 1.625 .250 GAP .375-16 EAR .500 10-4573

replaces Spicer® 10-4-5731.000 2.500 1.625 .250 GAP .375-16 GAP .500 10-0493



A L

B

D

C


108

C DSet Screw

Centerline DistanceRound to End Hub Keyway to End End YokeBore of Hub Diameter Width Location Hole Size Location of Hub Part Number

A L

B

D

C


1.000 2.500 1.625 — — (2).375DT EAR .500 10-4443replaces Spicer® 10-4-443

1.063 2.500 2.250 .250 GAP .375-16 EAR .500 N10-41631.125 2.500 2.250 .312 GAP .375-16 GAP .500 10-44731.125 2.500 2.250 .250 GAP .375-16 EAR .500 10-4143


replaces Spicer® 10-4-1131.125 2.500 2.250 .250 GAP .375-16 EAR .500 10-4103

replaces Spicer® 10-4-1031.188 2.500 2.250 .312 GAP .375-16 EAR .500 N10-41531.188 2.500 2.250 .250/.312 GAP .375-16 EAR .500 10-15741.250 2.500 2.250 .312 GAP .375-16 EAR .500 10-4193


replaces Spicer® 10-4-1231.250 2.500 2.250 — — (2).375-16 EAR .500 10-43631.250 2.500 2.250 .250 GAP .375-16 EAR .500 10-4183

replaces Spicer® 10-4-1831.375 2.500 2.000 .312 GAP .375-16 EAR .500 N10-42931.500 2.500 2.000 — — .281 EAR .500 N10-1532


109

N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® No. 5-170X)

.875 - 13 Involute Spline.878/.875 .758/.753 1.625 2.500 2.030 .375-16 EAR .500 10-4481


1.125 - 6 Spline1.125/1.124 .956/.955 1.625 2.500 2.030 .330DT EAR .375 N10-0411

1.375 - 6 Spline1.375/1.374 1.169/1.167 2.000 2.500 2.030 .330DT EAR .375 N10-04311.377/1.374 1.173/1.168 3.562 3.500 3.030 — — — 10-4137

Implement end trailing pin quick disconnect1.377/1.374 1.173/1.168 3.562 3.500 3.030 — — — 10-4139

Tractor end trailing pin quick disconnect

Spline Data D CE F Bottom of Set Screw or Drill Thru

Major Minor Centerline Crosshole DistanceDiameter Diameter Hub to End to End Hole to End End YokeMax/Min Max/Min Diameter of Spline of Spline Size Location of Hub Part Number

A L

B

D

C

F

E


110

F E C DCenterline

Round Keyway Set Screw Hub Length Thru to End Joint End YokeBore Width Thread Diameter Bore of Hub Angle Part Number

N1310 Series use Kit No. 1-0153 A-3.469 B-1.062 (Replaces Spicer® 5-153X)

.750 Bore Blank 2.000 1.625 2.563 17O N2-4-177

.875 .250 .375-16 UNC 2.000 1.625 2.563 17O N2-4-5831.000 .250 .375-16 UNC 2.000 1.625 2.563 17O N2-4-4731.125 .250 .375-16 UNC 2.000 1.625 2.563 17O N2-4-5031.250 .312 .375-16 UNC 2.000 1.625 2.563 17O N2-4-5331.250 Bore Blank 2.000 1.625 2.563 17O N2-4-533-11.375 .375 .375-16 UNC 2.000 1.625 2.563 17O N2-4-8031.375 Bore Blank 2.000 1.625 2.563 17O N2-4-803-1

A

B

D

C

E

F

END YOKESOutside Snap Ring

111

Spline Data G C DE F

Major Minor Ground CenterlineDiameter Diameter Set Screw Hub Length Thru to End Joint End YokeMax/Min Max/Min Thread Diameter Bore of Hub Angle Part Number

N1310 Series use Kit No. 1-0153 A-3.469 B-1.062 (Replaces Spicer® No. 5-153X)

.875 - 13 Involute Spline.878/.875 .758/.753 .375-16UNC 2.125 1.562 2.562 17O N2-4-3331

D

C F

E

B

A G

1.000 - 15 Involute Spline1.026 .875 — 2.000 1.265 2.313 17O N2-4-4921

END YOKES with SPLINED BOREOutside Snap Ring

112

C D E KCircle

Flange Diameteror or Number of Pilot Diameter Flange Face

Swing Bolt Bolt Bolt M—Male Joint to Flange YokeDiameter Pattern Size Holes F—Female Angle Centerline Part Number


3.500 2.750 .344 4 M-2.250 — 1.690 10-1022replaces Spicer® 10-2-29

A L

B

K

E

CD

FLANGE YOKESInside Snap Ring

113

C D E KCircle

Flange Diameteror or Number of Pilot Diameter Flange Face

Swing Bolt Bolt Bolt M—Male Joint to Flange YokeDiameter Pattern Size Holes F—Female Angle Centerline Part Number

B

E

D C

A

K


3.600 2.750 8mm 4 M-2.250 15O 1.625 N2-2-899-1(.315) fits Datsun applications

3.625 2.875 .375 4 M-3.625 20O 1.375 N2-2-3493.875 3.125 .375 4 M-2.375 20O 1.375 N2-2-3294.250 3.125 .375 4 M-2.375 30O 1.625 N2-2-459

4.625 3.750 .438 4 M-2.750 20O 1.375 N2-2-479fits 1350 Series Flange

4.750 3.500 .500 4 F-2.000 20O 1.625 N2-2-9395.875 4.750 .500 4 M-3.750 20O 1.375 N2-2-579

fits 1310/1480 Series Conversion Flange

FLANGE YOKESOutside Snap Ring

114

C DCenterline Lube Fitting Slip Yoke

Rectangular to End Distance to AssemblyBore of Hub Location End of Hub Part Number Part Number

N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500(Replaces Spicer® 5-170X)

.750X.875 5.500 GAP 1.750 0641-B N10-1769

A L

B

D

C


.875 5.500 GAP 1.750 0641-B 10-3162replaces Spicer® 10-3-162X

1.125 5.500 GAP 1.750 0641-B 10-0332replaces Spicer® 10-3-32X

A L

B

D

C

C


Hexagon to End Distance to AssemblyBore of Hub Location End of Hub Part Number Part Number

SLIP YOKE ASSEMBLIESInside Snap Ring

115


Round to End Keyway Distance to AssemblyBore of Hub Location Width Location End of Hub Part Number Part Number


.750 5.500 GAP .188 GAP 1.750 0641-B N10-0313X

.813 5.500 GAP .250 GAP 1.750 0641-B 10-0323replaces Spicer® 10-3-23X

.875 5.500 GAP .250 GAP 1.750 0641-B 10-0333replaces Spicer® 10-3-33X

1.000 5.500 GAP .250 GAP 1.750 0641-B 10-0383replaces Spicer® 10-3-83X

1.125 5.500 GAP .312 GAP 1.750 0641-B 10-3183replaces Spicer® 10-3-183X

1.125 5.500 GAP .250 GAP 1.750 0641-B N10-17671.250 5.500 GAP .312 GAP 1.750 0641-B 10-3163

replaces Spicer® 10-3-163X

A L

B

D

C


Square to End Distance to AssemblyBore of Hub Location End of Hub Part Number Part Number




1.000 5.500 GAP 1.750 0641-B 10-3122replaces Spicer® 10-3-122X

L

B

A

D

C


116

Spline Data G CE F W

Major Minor Space Centerline Centerline Slip YokeDiameter Diameter Width to End to Face Joint Lube Dust AssemblyMax/Min Max/Min Max/Min of Spline of Washer Angle Fitting Cap Part Number


1.125 - 10 Spline1.125/1.124 .938/.937 .176/.174 5.500 1.470 — 0641-B — 10-0381

replaces Spicer® 10-3-81X1.125/1.124 .938/.937 .176/.174 5.500 1.470 — 0641-B 11-1075

includes metal washer and cork seal

1.250 - 6 Spline1.251/1.249 1.065/1.062 .313/.311 5.500 1.470 — 0641-B — N10-1765

1.250 - 16 Spline1.250/1.249 1.062/1.057 .115/.114 5.500 1.470 — 0641-B 280196 N10-0318

A L

B

CG

FE

W


117

Spline Data G CE F W

Major Minor Space Centerline Centerline Slip YokeDiameter Diameter Width to End to Face Joint Lube Dust AssemblyMax/Min Max/Min Max/Min of Spline of Washer Angle Fitting Cap Part Number


1.250 - 16 Spline1.250/1.249 1.062/1.057 .115/.114 6.562 1.430 30O 0641-B ND2K N2-3-4441KX

1.375 - 16 Spline1.375/1.374 1.187/1.182 .135/.133 5.375 1.050 15O 0641-B 280194 N2-3-128KX1.375/1.374 1.187/1.182 .135/.133 6.000 1.050 20O 0641-B 280195 N2-3-4951KX1.375/1.374 1.187/1.182 .135/.133 6.000 1.050 20O 0641-B 280194 N2-3-7981KX1.375/1.374 1.187/1.182 .135/.133 6.875 1.530 30O 0641-B 280195 N2-3-5221KX1.375/1.374 1.187/1.182 .135/.133 6.875 1.530 30O 0641-B 280194 N2-3-8001KX1.375/1.374 1.187/1.182 .135/.133 7.875 1.530 30O 0641-B 280195 N2-3-5821KX1.375/1.374 1.187/1.182 .135/.133 7.875 1.530 30O 0641-B 280194 N2-3-8021KX

B

CG E

F

W

A

SLIP YOKE ASSEMBLIESOutside Snap Ring

118

Sub Assemblies Components1 6 2 3 4 5

Yoke &Stub Shaft, Yoke & Tube,

Cross & Cross &Bearing Kit Bearing Kit Slip Yoke Cross & CompleteAssembly Assembly Assembly Stub Shaft Bearing Kit Tube Yoke Driveshaft

Part Part Part Part Part Part PartSeries Number Number Number Number Number Tube Size Number Number

N1000 N10-18-1741 11-5914 10-0318 N2-40-1741 1-0170 2.000X.083 10-1005 N10270-SF

DRIVESHAFT COMPONENTPart Numbers

A B C DComplete

Max. Ext. Compressed Yoke & Tube Yoke & Stub Shaft Assembly DriveshaftSeries Length Length Tube Size Length Min. Length Max. Length Part NumberN1000 69.39 10.00 2.000X.083 59.91 7.48 9.48 N10270-SF

61

2 3B/4 5

D

A

C

N1000 SERIES AUXILIARYPOWER TAKE-OFF

Unwelded Driveshaft Assembly

119

A B C DComplete

Max. Ext. Compressed Yoke & Tube Yoke & Stub Shaft Assembly DriveshaftSeries Length Length Tube Size Length Min. Length Max. Length Part NumberN1310 55.75 9.50 2.000X.083 49.44 6.25 8.25 N9553-SF

Components1 2 3 4

Slip Yoke Cross & CompleteAssembly Stub Shaft Bearing Kit Tube Yoke Driveshaft

Part Part Part Part PartSeries Number Number Number Tube Size Number Number


N1310 N2-3-128KX N2-40-1031 1-0153 2.000X.083 N2-28-357 N9553-SF

1 2 4B / 3

C

A

D

N1310 SERIES AUXILIARYPOWER TAKE-OFF

Unwelded Driveshaft Assembly

120

1.375-16 Spline 24.000 2.500 280194 1.375 N2-4-803-1 N2-40-138-2without Dura-Slip® on spline

A C FOverall Length of Mating Butt Mating

Spline data Length Spline Dust Cap Diameter End Yoke Part Number

Welded Application

A

C

F

SLIP STUB SHAFTSfor auxiliary Power Take-off

A B C DSlip YokeAssembly Stub Shaft Cross & Bearing Kit End Yoke Driveshaft Kit

Series Part Number Part Number Part Number Part Number Part NumberN1310 N2-3-7981KX N2-40-138-2 1-0153 N2-4-803-1 N91382-SF

* Used primarily in crank driven front mount hydraulic pump applications.Also suitable for clutch connection drives.Maximum operating speed—2800 R.P.M.(Not recommended for vehicular propeller shaft applications.)


DC B CA

N1310 SERIES AUXILIARYPOWER TAKE-OFF KIT

for Close Coupled applications*(Assembly and Welding required)

121

S E R I E S

SLFSF

SF - Standard FlangeSLF - Special Large Flange

KeywayBore Width/Depth N1310 N1350-N1410 N1480-N1550 N1610 N1710 N1810

Std. Rough Bore N2-1-1313 N3-1-1013 N4-1-1133 N5-1-873 N6-1-1253 N6.5-1-533

1.000 .250 X .125 N2-1-1313-1 N3-1-1013-1

1.125 .250 X .125 N2-1-1313-2 N3-1-1013-2

1.250 .250 X .125 N2-1-1313-3 N3-1-1013-3

1.250 .313 X .156 N2-1-1313-4 N3-1-1013-4

1.375 .313 X .156 N2-1-1313-5 N3-1-1013-5

1.375 .375 X .188 N2-1-1313-6 N3-1-1013-6

1.438 .375 X .188 N2-1-1313-7 N3-1-1013-7

1.500 .375 X .188 N2-1-1313-8 N3-1-1013-8 N4-1-1133-1

1.625 .375 X .188 N2-1-1313-9 N3-1-1013-9 N4-1-1133-2

1.750 .375 X .188 N2-1-1323-1 N3-1-1013-10 N4-1-1133-3

1.875 .375 X .188 N2-1-1323-2 N3-1-1013-11 N4-1-1133-4

1.875 .500 X .250 N2-1-1323-3 N3-1-1013-12 N4-1-1133-5

2.000 .500 X .250 N2-1-1323-4 N3-1-1023-1 N4-1-1133-6 N5-1-873-1 N6-1-1253-9

2.125 .500 X .250 N2-1-1323-5 N3-1-1023-2 N4-1-1133-7 N5-1-873-2 N6-1-1253-10

2.250 .500 X .250 N2-1-1323-8 N3-1-1023-10 N4-1-1133-13

2.250 .625 X .313 N2-1-1323-6 N3-1-1023-3 N4-1-1133-8 N5-1-873-3 N6-1-1253-11

2.375 .625 X .313 N2-1-1323-7 N3-1-1023-4 N4-1-1133-9 N5-1-873-4 N6-1-1253-12

2.438 .625 X .313 N3-1-1023-5 N4-1-1133-10 N5-1-873-5 N6-1-1253-1 N6.5-1-533-1

2.500 .625 X .313 N3-1-1023-6 N4-1-1143-1 N5-1-873-6 N6-1-1253-2 N6.5-1-533-2

2.750 .625 X .313 N3-1-1023-7 N4-1-1143-2 N5-1-873-7 N6-1-1253-3 N6.5-1-533-3

2.938 .750 X .375 N4-1-1143-3 N5-1-873-8 N6-1-1253-4 N6.5-1-533-4

3.000 .750 X .375 N4-1-1143-4 N5-1-873-9 N6-1-1253-5 N6.5-1-533-5

3.500 .875 X .438 N4-1-1143-5 N5-1-883-1 N6-1-1253-6 N6.5-1-533-6

3.938 1.00 X .500 N5-1-883-2 N6-1-1253-7 N6.5-1-533-7

4.000 1.00 X .500 N5-1-883-3 N6-1-1253-8 N6.5-1-533-8

Large Rough Bore N2-1-1323 N3-1-1023 N4-1-1143 N5-1-883 N6-1-1263 N6.5-1-543

Standard FlangeRough Bore Diameter .750 1.000 1.250 1.250 1.250 1.250Max. Bore and Kw. 1.688 X .375 1.875 X .500 2.438 X .625 3.00 X .750 4.00 X 1.00 4.00 X 1.00

Special Large FlangeRough Bore Diameter 1.375 1.750 2.375 3.00 3.500 3.500Max. Bore and Kw. 2.375 X .625 3.00 X .750 3.750 X 1.00 4.500 X 1.00 5.500 X 1.250 5.500 X 1.250

Bore

OAL

EBC

OD

Tapped

KeywayDrilled

TappedKeyway

Bore

Tapped

OAL

E

ODBC

Companion Flange

122

S E R I E S

SLFSF

N1310 N1350-N1410 N1480-N1550 N1610 N1710 N1810

NO. OF BOLTS 4 4 4 8 8 12

THREAD SIZE ³⁄₈-24 ⁷⁄₁₆-20 ¹⁄₂-20 ³⁄₈-24 ³⁄₈-24 ⁷⁄₁₆-20

BOLT CIRCLE 3.12 3.75 4.75 6.12 7.25 7.25

E PILOT DIA. 2.375 2.750 3.750 6.625 7.750 7.750

O.D. 3.88 4.56 5.88 6.88 8.00 8.00

O.A.L. SF 2.00 2.00 2.50 3.50 4.00 4.00

SLF 2.50 3.00 3.50 5.00 6.00 6.00

BORE DIA. SF 1.69 1.88 2.44 3.12 4.00 4.00

(MAX.) SLF 2.38 2.75 3.75 4.50 5.50 5.50

BORE DIA. SF 0.75 1.00 1.25 1.25 1.25 1.25

(ROUGH) SLF 1.38 1.75 2.38 3.12 3.50 3.50

KEYWAY SF ³⁄₈ X ³⁄₁₆ ¹⁄₂ X ¹⁄₄ ⁵⁄₈ X ⁵⁄₁₆ ³⁄₄ X ³⁄₈ 1 X ¹⁄₂ 1 X ¹⁄₂

(MAX.) SLF ³⁄₈ X ³⁄₁₆ ³⁄₄ X ³⁄₈ ⁷⁄₈ X ⁷⁄₁₆ 1¹⁄₈ X ⁹⁄₁₆ 1¹⁄₄ X ⁵⁄₈ 1¹⁄₄ X ⁵⁄₈

Bore

OAL

EBC

OD

Tapped

KeywayDrilled

TappedKeyway

Bore

Tapped

OAL

E

ODBC

Companion Flanges—Specifications

Notes

123


⁷⁄₈" 76-0013

1" 76-0015

1¹⁄₈" 76-0017

1³⁄₁₆" 76-0018

1¹⁄₄" 76-0019


³⁄₄" 78-0011

¹³⁄₁₆" 78-0012

¹⁵⁄₁₆" 78-0014

1¹⁄₈" 78-0017

1³⁄₁₆" 78-0018

1¹⁄₄" 78-0019

TypeDiameter Length Head Point Part Number

³⁄₈"-16 ¹⁄₂" Allen Cup 50-2501

³⁄₈"-16 ³⁄₄" Square Cup 50-2502

¹⁄₄"-20 ¹⁄₂" Allen Cup 50-2503

³⁄₈"-16 .750 Square Drilled — 50-0449for Lock Wire


Set Screws*

Hanger Bearings: Plain Bearing

Pillow Block Bearings: Plain Bearing

MISCELLANEOUS PTO PARTS

124

WoodruffWidth Length Number Part Number

³⁄₁₆" 1" 13 50-1504

¹⁄₄" 1" 15 50-1505

⁵⁄₁₆" 1" B 50-1506


Woodruff Keys*

Width Length Part Number

³⁄₁₆" X ³⁄₁₆" 1" 50-1501*

¹⁄₄" X ¹⁄₄" 1" 50-1502*

⁵⁄₁₆" X ⁵⁄₁₆" 1" 50-1503*

³⁄₁₆" X ³⁄₁₆" 12" 50-3501

¹⁄₄" X ¹⁄₄" 12" 50-3502

⁵⁄₁₆" X ⁵⁄₁₆" 12" 50-3503


Square Keys

⁵⁄₁₆" ¹⁄₄" 1¹⁄₄" 50-1511*

¹⁄₄" ³⁄₁₆" 1¹⁄₄" 50-1512*

³⁄₈" ⁵⁄₁₆" 1¹⁄₂" 50-1513*

⁵⁄₁₆" ¹⁄₄" 12" 50-3511

¹⁄₄" ³⁄₁₆" 12" 50-3512

³⁄₈" ⁵⁄₁₆" 12" 50-3513


Step Keys"A" "B" Length Part Number

—A—

—B—

MISCELLANEOUS PTO PARTS (Cont.)

125

Rectangular ³⁄₄" X ⁷⁄₈" L600 73-0750

Rectangular 1" X 1¹⁄₈" 1200, 1800, 2000 73-1001

Square 1³⁄₁₆" 2200 73-1188

Square 1⁵⁄₁₆" 44, 2600, 55 73-1313


Standard Series Shafting—72" Lengths


Standard Tubing—72" Lengths

Rectangular 1" X 1¹⁄₈" L600 70-1001

Rectangular 1¹⁄₄" X 1³⁄₈" 1200, 1800, 2000 70-1250

Round 1⁵⁄₈" X .065(16 GA) L600 70-1625

Round 2" X .083(14 GA) 1000, 1200, 1800, 2000 70-2000

Round 2¹⁄₈" X .120(11 GA) 2200 70-2125

Round 2¹⁄₄" X .120(11 GA) 2200, 44 70-2250

Round 2¹⁄₂" X .134(10 GA) 44, 55 70-2500

Round 2³⁄₄" X .109(12 GA) 44, 2600 70-2750

Round Rectangular

Rectangular Square

³⁄₄" RD ³⁄₁₆" 71-0750

¹³⁄₁₆" RD ¹⁄₄" 71-0813

⁷⁄₈" RD ¹⁄₄" 71-0875

1" RD ¹⁄₄" 71-1000

1¹⁄₄" RD ⁵⁄₁₆" 71-1250

Type Dimensions Part Number

Solid Shafting—72" Full Length Keyway

Solid Shafting—72" LengthsShaft Size Part Number

Square Hexagon

³⁄₄" SQ 72-0750

⁷⁄₈" SQ 72-0875

1" SQ 72-1000

1¹⁄₄" SQ 73-1250

⁷⁄₈" HEX 72-0888

1" HEX 72-1002

1¹⁄₈" HEX 72-1125

Round

SHAFTING & TUBING

126

3. Align the groove in the yoke with the slots in the bell and tube.

1. Position tube and bell so that slots are in line. Push tube into bell, position so that slots in the bell are in line with the slots in the tube.

2. Slide driveline into bell end. Bell and tube can move during installation; and can be realigned after driveline is positioned. By supporting the shield by hand the driveline is easy to move into the correct operating position.

4. Be sure you have the correct shield bearing for the end you are mounting. The large 3” O.D. outer tube uses the large bearing. The smaller 2 3/4” inner tube uses the small bearing.

5. Insert bearing into slot in bell and tube and into groove in the yoke. Push with thumb until bearing is in place.

6. The bearings must be inserted in the same direction in order to fit properly. The first three bearings go in easily due to the large amount of clearance.

7. The last bearing to be installed will take up the clearance and require slightly more effort to push into place. Be certain all four bearings are seated in the shield correctly. Do not allow the heel of the bearing to stick out of the tube. The correct installed position is shown in this picture. Shield Bearings must be installed properly in regards to the rotation of the driveline. This prevents the Shield Bearings from loosening or popping out of the Bearing slots.

NOTE: Before installing shield bearings, it is beneficial to apply somestandard grease onto the bearing groove of the yoke to prolong bearing life.

INSTALLATION OF FLEX BELL SHIELDS

Thicker SectionFor 3” OD

Tubes

Thinner SectionFor 2 3/4”

Tubes


FLEX BELL SYSTEM INSTRUCTION SHEET™

127

Neapco Inc. 740 Queen St. Pottstown PA 19464 Telephone: (800) 821-2374

8. This picture shows a bearing and the slot in the bearing tab that permits removal by use of a screwdriver.

9. Insert screwdriver into bearing and twist. If the bearing does not readily lift in the slot, twist in the other direction. Twist only enough to raise the heel of the bearing clear of the flex bell. Then, pull the bearing directly away from the shield. Remove all bearings this way.

10. Driveline can be pulled out of shield bell and tube.

1. Insert screwdriver (PHOTO 9)

2. Twist until heel clears (PHOTO 9)

3. Pull away from the direction the bearing was installed. (PHOTO 9)

NOTE: Small arrow on bearing indicatesdirection to twist for removal

We recommend only tack welding the collar to the slip yoke. Two or three spotsof weld is sufficient. Welding all-the-way around may cause the splined I.D. todistort or shrink, due to the build up of heat.

We recommend a minimum of 5.00 inches of shield engagement for shafts upto 36.00 inches centerline to centerline. Any shafts over 36.00 inches centerlineto centerline should have a minimum of 8.00 to 10.00 inches of shield overlap.

We recommend the use of the shield support bearing to eliminate vibration orwhipping.

We do not recommend the use of this shielding system on applicationsexceeding 2500 RPM.

��

��

��

��

REMOVAL OF FLEX BELL SHIELDS

NEAPCOPART NO. PART NO.




128

INTERCHANGE

AEC 43093 10-521543113 10-521643123 10-521843125 10-157444011 50-151144012 50-151244013 50-151344N 3-004444R22 44-225644R24 44-2460

44S22 44-220644S22 44-2220570 1-0170576 1-0170576 1-0616588 3-01886H14 16-63036Q12 16-61766R15 16-61146R10 16-6210

6R12 16-61116R14 16-62136R16 16-62156R18 16-62166R19 16-62176R20 16-62186S18 16-61346Q12 16-61716Q18 16-61386S22Q6 16-6409

12P16W 12-134012P20W 12-131812Q14 12-117012Q16 12-115912Q18 12-114812R14 12-113312R15 12-113412R16 12-1155

12R18 12-116212R22 12-112012S20 12-118114N 1-207514Q16 20-931014Q20 20-912714R16 20-911514R19 20-921714R20 20-921814R22 20-9120

3532W 22-132535N 2-227535Q18 22-112435Q20 22-112835R18 22-113235R19 22-112935R20 22-121835R22 22-121935R23 22-117835S18 22-1142

35S22 22-113440012 10-041240013 10-041340022 10-042240023 10-531940023 10-155740043 10-417340053 10-494340073 10-047340081 10-0411

40093 10-049340095 10-416340103 10-414340113 10-447340115 10-533440115 10-418340123 10-419340150 10-045241103 10-316341112 10-0312

41112 10-175841113 10-031341122 10-032241122 10-043141123 10-032341132 10-033241133 10-033341150 10-312241153 10-038341173 10-0312

41181 10-038141183 10-320341193 10-318342013 10-469342063 10-170342093 10-170543063 10-5213

002556082 3-0188053120 1-1475081058 1-147511020 2-22751124585 1-01721174981 1-1275

13113 2-22751323723 2-2275224890 1-1475255608 3-01882556082 3-018826726 2-227526727 2-227526728 2-22753011020 2-22753026726 2-2275

3026726-4 2-22753026727 2-22753026727-2 2-2275339981 1-12754020 2-2275517311 1-2075517312 2-2275521720 1-2075526299 1-2075530538 2-2275

531220 1-2075542862 1-1275546945 1-1275548982 2-2275617909 1-01706179097 1-017061805 2-2275

ALLISCHALMERS

618805 2-2275618805-6 2-2275645053 1-01706450530 1-0172645110 1-01706451108 1-0170648366 1-1275648366-3 1-12756483663 1-1275653811 1-1475

665611 2-2275666878 1-147570053120 1-147570081058 1-147570617909 1-017070618805 2-227570645053 1-017070645110 1-017070648366 1-127571174981 1-1275

73011020 2-227573026726 2-227573026727 2-22757842779 1-1475823456 1-2075

BONDIOLI &PAVESI

1.03 70-0104

1.04 70-01051.05.07 8-10121.05.53 8-10081.05.54 8-10101.06 8-10201.07 8-10301.13 50-01121.41 1-012110.41 3-1021125113000 70-0705

125223000 70-08042.03 70-03052.04 70-02052.05.07 8-20122.06 8-20202.07 8-20302.41 1-0221204086860 8-8020204086861 8-8030204176851 8-7020

204176852 8-70303.03 70-03043.05.07 8-30123.05.50 8-30163.06 8-30203.07 8-30303.41 1-03214.04 70-04054.05.07 8-40124.05.50 8-4016

4.06 8-40204.07 8-40304.13 50-03124.41 1-04215.03 70-05045.04 70-05055.05.07 8-5012

5.05.54 8-50105.05.55 8-50115.06 8-50205.07 8-50305.41 2-0521507080351 8-8012507083751 8-8021507083851 8-8014507170351 8-7012507173751 8-7021

507173851 8-70146.03 70-07046.05.07 8-60126.05.44 8-60166.06 8-60206.07 8-60306.33.46 8-20086.33.48 8-20106.33.51 8-30106.33.52 8-3011

6.33.54 8-40106.33.55 8-40116.41 3-06217.81 3-07218.41 3-08219.81 3-0921

BUSH HOG119 2-22751294 3-0044

137 3-0044138 1-2075139 1-2075199 2-2275595 2-227562454 56-066662457 56-062663415 1-187565111 3-01887-39-576 1-0170

7-39-943 1-127587436 56-1857

BWD100-103 10-0423100-103 10-4143100-113 10-4473100-115 10-4183100-12 10-0412100-123 10-4193

100-13 10-0413100-22 10-0422100-23 10-0423100-43 10-0443100-43 10-4173100-53 10-0453100-63 10-0463100-73 10-0473100-83 10-0483100-93 10-0493

101-12 10-0312101-22 10-0322101-23 10-0323101-32 10-0332101-33 10-0333101-53 10-0383101-83 10-0381





129

INTERCHANGE

101-93 10-3183114-1004 1-1475114-103 1-1275114-104 1-2075114-105 2-2275114-148 1-0171114-151 3-0044114-2101 1-1875114-503 1-0172114-572 1-0170

114-575 1-017060072 11-175060088 50-250160100 64-655160100 56-066660104 56-260460448 63-125460715 63-064260824 52-461861112 12-1112

61113 12-111361115 12-111561117 12-111761118 12-111861119 12-121861120 12-112061133 12-113361134 12-113461135 12-113561148 12-1148

61155 12-115561159 12-115961162 12-116261163 12-116361168 12-116861169 12-116961170 12-117061171 12-117161172 12-117261173 12-1173

61174 12-117461175 12-117561176 12-117661181 12-118161197 12-119761228 12-130861252 12-131461255 12-131661263 12-132061471 12-1301

61768 58-062761774 58-063961775 58-065161965 46-690062101 22-231262112 56-230062116 22-121862118 22-121962119 22-111962120 22-1120

62124 22-112462125 22-112562126 22-112662128 22-112862129 22-112962130 22-113062131 22-1131

62132 22-113262133 22-113362134 22-113462138 22-113862140 22-114062142 22-114262155 22-115562158 22-115862178 22-117862190 22-1190

62228 22-130762940 56-229463074 73-075063112 73-100163204 51-017563241 50-150163242 50-150263243 50-150363244 50-150463245 50-1505

63246 50-150663311 50-151163312 50-151263313 50-151363620 52-580063682 50-250264118 26-511864119 22-131664119 26-511964131 26-5131

64138 26-513864353 53-243464602 63-126665101 10-413965111 10-041365112 10-417365113 10-511365114 10-047365115 10-457365116 10-4473

65118 10-419365123 10-512365124 10-049365125 10-412365129 10-512965131 10-513165134 10-041165136 10-494365138 10-155765141 10-5213

65148 10-175865149 10-514965154 10-444365157 10-032365159 10-038165164 10-449365169 10-176565171 10-042265172 10-043265173 10-0332

65174 10-517465175 11-107565176 10-031265178 10-032265183 10-031365184 10-033365185 10-3203

65186 10-038365187 10-043165189 10-041265191 10-416365193 10-045265196 10-414365197 10-411365199 10-318365213 10-5303

65217 10-312265261 10-531365263 10-046365268 10-042365323 10-533465342 10-533465342 10-418365344 10-437365347 10-316365348 10-4103

65354 10-176965371 10-469365373 10-170365375 10-170565384 10-535465385 10-170765421 10-536165432 10-158065499 10-429365527 10-3173

65528 10-316265919 10-428266000 10-527566141 10-521366187 10-521566210 10-521666233 10-157466233 10-157466256 10-521866341 53-063466460 56-2646

66740 56-064767034 64-062767035 64-063967036 56-062667036 64-065167040 64-182867041 64-184067042 65-285167042 64-185267052 65-0627

67053 65-063967054 56-185767054 65-065167058 65-182867059 65-184067060 65-185267065 64-275267065 65-262967066 65-263967067 70-1001

67068 70-125067069 70-162567070 70-200067071 70-225067072 70-275067076 73-118867101 18-7404

67115 18-711567117 18-711767119 18-711967120 18-712067125 18-712567127 18-712767128 18-712867132 18-7132

67136 18-740667140 18-740367238 18-731367238 20-930767922 52-341868052 63-065468482 52-581868702 63-066668800 71-075068801 71-0813

68802 71-087568803 71-100068804 71-125068810 72-075068811 72-087568812 72-100068813 72-112569101 20-930969115 20-911569117 20-9117

69118 20-921769118 20-911869119 20-911969120 20-912069127 20-912769132 20-913269149 20-912669154 20-915469214 20-921869214 20-9302

69302 20-93107009J 16-62167654J 16-6171

1S678 1-14752H861 1-14752R960 3-01883H6263 1-1475

3H8257 1-14753H8262 1-14753H8263 1-14755F2426 2-22755F2476 2-22755F6332 2-22755S7579 1-14756F2426 2-22756F4339 2-22756F4341 2-2275

6F4342 2-22756F4343 2-22756F9741 2-22757F3679 2-22758D1508 1-01728D2909 1-1475

CATERPILLAR





130

INTERCHANGE

AA-6537 10-4473AA-6539 10-0493AA-6540 10-4193AB-705 1-0170AB-706 51-5275PHA3790 51-2322

DEMPSTER

FEDERAL MOGULTRW

21016 10-415321017 10-521821018 10-043121019 10-413921020 10-541121021 10-031221022 10-032321023 10-0381

21024 10-038321025 10-041221026 10-041321027 10-042221028 10-445321029 10-044321030 10-045221031 10-045321032 10-047321033 10-048321034 10-100521035 10-1022

21036 10-312221037 10-316221038 10-318321039 10-411321040 10-413721041 10-413921042 10-417321043 10-418321044 10-428221045 10-4363

21046 10-444321047 10-447321048 10-448121049 10-457321050 16-621021051 16-611121052 16-611221053 16-621321054 16-630321055 16-6114

21056 16-621521057 16-630221058 16-621621059 16-613821060 16-613421061 16-621721062 16-621821063 16-614121064 16-6187

21065 16-640921066 10-461121067 10-470321068 11-107521069 11-175021070 11-175321071 11-270121072 11-270221073 11-471421074 11-5914

21075 11-955321076 12-111221077 12-111721078 12-111921079 12-113321080 12-113421081 12-113521082 12-1139

21083 12-115521084 12-115921085 12-116221086 12-116921087 12-117021088 12-117121089 12-117321090 12-1174

21091 12-117521092 12-117621093 12-119321094 12-119721095 12-121521096 12-121621097 12-130021098 12-130221099 12-131221100 12-111321101 12-111521102 12-1301

21103 12-116321104 12-132621105 12-114821106 12-118121107 12-111821108 12-130821109 12-121821110 12-112021111 12-117221112 12-1190

21113 12-116821114 12-131421115 12-131521116 12-131621117 12-131821118 12-131921119 12-132021120 12-132121121 12-132821122 12-1330

21123 12-133421124 12-134021125 12-135021126 12-232121127 12-232221128 12-233021129 12-250621130 12-252121131 10-0615

21132 10-457321133 10-512321134 10-513221135 10-494321136 10-514921137 10-176521138 10-517421139 11-107521140 10-320321141 10-4113

21142 10-157421143 10-527521144 10-530321145 10-532221146 10-533121147 10-533421148 10-410321149 10-1769

21150 18-711521151 18-712021152 18-740421153 10-170521154 10-535221155 10-535421156 10-170721157 10-5361

21158 10-158021159 10-536621160 10-541221161 10-543021162 16-060621163 16-061521164 16-062121165 16-161521166 16-360021167 16-612721168 16-612921169 16-6131

21170 16-613221171 16-616521172 16-617121173 16-617621174 16-617821175 10-515821176 16-651621177 16-651821178 16-661621179 18-7117

21180 18-711921181 18-712521182 18-712721183 18-712821184 18-713221185 18-730521186 18-731321187 18-731521188 18-732721189 18-7328

21190 18-733021191 18-733921192 18-740321193 18-740521194 18-740621195 18-750621196 20-911921197 20-916021198 20-9180

21199 20-918321200 20-931021201 20-911521202 20-911721203 20-921721204 20-921821205 20-912721206 20-912021207 20-913221208 20-9321

21209 20-932521210 20-915421211 20-930721212 20-918921213 20-919121214 20-919321215 20-930221216 20-9311

20001 1-147520007 1-187520017 1-017020018 1-017020019 1-017220036 1-127520037 1-2075

20038 2-227520038E 2-227620057 3-018820203 3-004420204 3-004520328 1-017120329 1-061620330 1-032120331 1-042120425 1-0121

20426 1-022120427 2-052120428 2-242120429 3-062120430 1-100120431 3-082120602 10-041320603 10-042220604 10-042320609 10-0473

20615 10-515620630 10-031220631 10-031320632 10-032220633 10-032320634 10-033220635 10-033320636 10-038320637 10-0381

20638 10-316320645 10-469320647 10-170321000 10-437321001 10-531321002 10-521321003 10-041221004 10-428221005 10-316221007 10-5215

21008 10-175821009 10-045221010 10-312221011 10-416321012 10-521621013 10-318321014 10-043221015 10-0411





131

INTERCHANGE

21217 20-931321218 20-931721219 20-931821220 20-931921221 20-932021222 20-932121223 20-932421224 20-9330

21225 20-950621226 20-952121227 22-110521228 22-112621229 22-113021230 22-113321231 22-114021232 22-114521233 22-115421234 22-1155

21235 22-115821236 22-116221237 22-119021238 22-130721239 22-131921240 22-132521241 22-133021242 22-133721243 22-133821244 22-2330

21245 22-352121246 22-950621247 22-952121248 26-513121249 26-513821250 22-113121251 22-112521252 22-113221253 22-112421254 22-1142

21255 22-112921256 22-121821257 22-112821258 22-121921259 22-231621260 22-113421261 22-113821262 22-231221263 22-117821264 22-1119

21265 22-112021266 22-131621267 26-514821268 26-515521269 26-516321270 26-530621271 26-532321272 26-532421273 26-532521274 44-1826

21275 44-204521276 44-210021277 44-220021278 44-220621279 44-222121280 44-225621281 44-236021282 44-245621283 44-2460

21284 44-261021285 44-282021286 44-320021287 44-440621288 44-442121289 44-630021290 46-690021291 46-6902

21292 48-118121293 48-720221294 48-920221295 50-011221296 50-031221297 50-051221298 50-041221299 50-061221300 26-511821301 26-5319

21302 26-532121303 26-511921304 10-046321305 10-444321306 10-449321307 10-414321308 10-412321309 10-317321310 10-429321311 10-5129

21312 10-513121313 16-760021314 10-042321315 10-413321316 10-046321317 10-033321318 10-049321319 10-414321320 10-419321321 10-4123

21322 10-316321323 10-032221324 10-410321325 10-033221326 20-911821327 20-930921328 20-912621329 20-913121330 22-231521331 22-2312

21332 22-231721333 22-134421334 22-134321335 44-222021336 44-220121337 10-413721338 56-266921339 10-419321340 10-447321341 10-0493

21342 10-155721343 10-418321344 50-150121345 50-150221346 50-150321347 50-150421348 50-150521349 50-150621350 56-0626

21351 56-185721353 50-151121354 50-151221355 50-151321356 50-221221357 50-231221358 50-250121359 50-2503

21360 50-350121361 50-350221362 50-350321363 50-351121364 50-351221365 50-351321366 51-017521367 51-232221368 11-175021369 52-3418

21370 52-460021371 52-461821372 52-580021373 52-581821374 53-063421375 53-063521376 53-183421377 53-203421378 53-241521379 53-2434

21380 53-243521381 53-264321382 53-264421383 53-350021384 55-213021385 55-241021386 55-260021387 55-280021388 55-283621389 55-3240

21390 55-364021391 55-930621392 55-932021393 55-932121394 56-060021395 56-060421396 56-061521398 56-084421399 56-160021401 64-0651

21402 65-065121403 69-065121405 56-180421406 56-200021407 56-200421408 56-210121409 56-210221410 56-212221411 56-220021412 56-2223

21413 56-229421414 56-229521416 64-275121417 65-285121418 69-255121420 56-232421421 56-244221422 56-260021423 56-2646

21424 56-300121425 56-410321426 56-610521427 56-610621428 58-062721429 58-063921431 64-185221432 65-1852

21433 69-185221435 58-065121436 58-122721437 58-123921438 58-125121439 58-162721440 58-163921441 58-165121442 58-182821443 58-1840

21444 58-185221445 58-202821447 64-272821448 65-282821449 69-262821452 64-274021453 65-284021457 64-275221459 16-640721461 64-2529

21462 65-262921466 64-253921467 65-263921471 64-255121473 22-111621474 22-111821476 64-652921477 65-662921481 64-653921482 65-6639

21486 64-655121488 50-250221489 70-200021490 58-204021491 58-205221492 58-222921493 58-223921494 58-225121495 58-263921496 58-4451

21500 56-066621502 56-230021503 56-260421523 63-064221524 63-065421525 63-066621526 63-125421527 63-126621529 64-062721530 64-0639

21531 64-162721532 64-163921533 64-165121534 64-182821535 64-184021536 64-272721537 64-273921538 64-444721539 65-0627





132

INTERCHANGE

21540 65-063921541 65-162721542 65-1639

21543 65-165121544 65-182821545 65-184021546 65-282721547 65-283921548 65-442321549 67-062721564 69-064021565 69-064821566 69-1240

21567 69-124821568 69-182821569 69-184021570 69-224021571 69-224821572 69-252721573 69-253921574 70-010421575 70-010521576 70-0205

21577 70-030421578 70-030521579 70-040521580 70-050421581 70-050521582 70-070421583 70-100121584 70-125021585 70-162521586 70-2104

21587 70-210521588 70-212521589 70-220421590 70-220521591 70-225021592 70-225621593 70-240421594 70-240521595 70-250021596 70-2750

21597 71-075021598 71-081321599 71-087521600 71-100021601 71-125021602 72-075021603 72-087521604 72-088821605 72-100021606 72-1002

21607 72-112521608 72-223121609 73-075021610 73-100121611 73-118821612 73-125021613 73-131321614 8-012021615 8-013021616 8-100821617 8-101021618 8-101221619 8-102021620 8-1021

21621 8-103021622 8-200821623 8-2010

21624 8-201221625 8-202021626 8-202121627 8-203021628 8-210821629 8-211021630 8-211221631 8-212021632 8-212121633 8-2130

21634 8-222021635 8-223021636 8-232021637 8-233021638 8-241021639 8-241121640 8-242021641 8-242121642 8-243021643 8-3010

21644 8-301121645 8-301221646 8-301521647 8-301621648 8-302021649 8-302121650 8-303021651 8-401021652 8-401121653 8-4012

21654 8-401521655 8-401621656 8-402021657 8-402121658 8-403021659 8-501021660 8-501121661 8-501221662 8-501521663 8-5016

21664 8-502021665 8-502121666 8-503021667 8-601021668 8-601121669 8-601221670 8-601521671 8-601621672 8-602021673 8-6021

21674 8-603021675 69-264821676 10-511321677 20-921621678 8-241221679 50-108021680 50-109021681 50-128021682 56-810821683 70-070521684 70-080421685 8-251121686 8-251221687 8-2514

21688 8-251521689 8-252021690 8-2521

21691 8-253021693 8-253521694 8-701121695 8-701221696 8-701421697 8-702021698 8-702121699 8-703021700 8-801121701 8-8012

21702 8-801421703 8-801521704 8-801621705 8-802021706 8-802121707 8-803021708 10-043221709 10-043321710 12-140021711 12-1410

21712 16-860021713 18-180021714 18-180221715 18-180521716 18-181021717 20-930621719 22-122621720 22-220021721 22-220521722 22-2275

21723 24-240021724 24-240121725 24-240621726 24-242021727 24-242121728 44-447521729 53-060021730 53-204721731 53-224721732 56-2446

21733 61-120021734 64-442421735 64-443521736 65-443521737 68-224421738 68-224521739 80-120221740 80-350221741 80-350421742 80-3506

21743 80-352121744 80-440221745 80-440421746 80-440621747 80-442121748 10-417321749 55-222921750 58-442921751 58-443921752 58-445121753 12-230021750 58-442921751 58-443921752 58-4451

21753 12-2300

FIAT ALLIS70645053 1-017270645110 1-017070648366 1-1275

FMC1261563 1-01701263637 12-11901263638 1-12751263644 12-1326140-7114 12-1190140-7717 1-127516602 3-0188171-4208 1-01702241763 1-1875

2284721 1-1275230-8780 1-1875230-8788 18-7403LV00612 1-0170

FORD107854 1-1475145421 2-2275148357 1-1275

171333 1-1475175423 1-2075221613 1-2075291971 1-1475309575 1-1475C1TT-4724A 3-0188C1TZ-4635A 3-0188C3TZ-3815A 1-1475C5TZ-3815A 1-1475C6TZ-3815B 1-1475

CBPN-3250A 1-1475CBPN-3350B 1-1475

G & G128-1200 56-2004134-1214 70-1001134-1618 70-1250136-1200 72-0750136-1400 72-0875

136-1900 73-1188136-2000 73-1250136-2100 73-1313138-1214 73-0750138-1618 73-1001140-1400 70-2000140-3500 70-2125142-1400 72-0888142-1600 72-1002142-1800 72-1125

144-1200 71-0750144-1300 71-0813144-1400 71-0875144-1600 71-1000144-2000 71-1250177-0600 16-6129177-1200 12-1340





133

INTERCHANGE

177-1400 20-9126177-3500 22-1344177-4400 44-2100180-0600 16-6131180-1200 12-1318181-1400 20-9131181-1200 12-1334181-3500 22-1325181-4400 44-2200182-0606 16-6409

182-0621 16-0621182-1206 12-1190182-1221 12-1193182-1222 12-1172182-1406 20-9309182-1421 20-9321182-3506 22-2312182-3521 22-2317182-4406 44-2220182-4421 44-2201

18230606 16-060618231206 12-233018231221 12-232118231406 20-933018233506 22-2330183-0616 16-6302183-0620 16-6127183-1216 12-1163183-3526 22-1126184-0615 16-6114

184-0513 10-4173184-0514 10-5213184-0516 10-4573184-0518 10-4143184-0520 10-4193184-0521 10-4183184-0610 16-6210184-0612 16-6111184-0614 16-6213184-0616 16-6215

184-0618 16-6216184-0620 16-6218184-1216 12-1115184-1218 12-1117184-1220 12-1176184-1222 12-1120184-1416 20-9115184-1418 20-9117184-1420 20-9218184-1422 20-9120

184-1423 20-9154184-1424 20-9307184-3516 22-1131184-3518 22-1132184-3519 22-1129184-3520 22-1133184-3520 22-1218184-3522 22-1219184-3523 22-1119184-3524 22-1120

184-3528 22-1316184-4422 44-2256184-4424 44-2460184-4426 44-2610184-4428 44-2820184-51220 12-111918451420 20-9119

185-3520 22-112819100612 16-617619100614 16-6178192-0618 16-6134192-0622 16-6187192-1218 12-1181192-1422 20-9132192-3522 22-1134194-0600 53-0635194-1400 53-2034

194-3500 53-2434194-3500 53-2435196-1216 12-1319196-1218 12-1302196-1220 12-1330196-3520 22-1145196-3522 22-1337196-3524 22-1162302-0600 1-1475302-0675 1-0170

302-1200 1-1275302-1400 1-2075302-1875 1-1875302-3500 2-2275302-4400 3-0044302-5500 3-0045804-1216 12-1159

GMB

GEHL510004 1-1475

510007 1-2075510036 2-2275510114 1-2075CPL35N 2-2275GN100W 1-2075

G5-170X 1-0170G5-188X 3-0188

GGPL-6R 1-1475GGPL-12R 1-1275GGPL-14R 1-2075GGPL-35R 2-2275GGPL-44R 3-0044GGPL-55N 3-0045GUA-7 1-0321GUA-8 1-0421GUA-11 2-0521GUA-14 2-2421

HESSTON700708365 20-9309750182 1-0170750208 10-4153751255 1-1275753111 1-1275753772 1-2075754184 1-2075754465 20-9309

755157 10-5322756817 1-0170756924 1-2075756999 1-1875757443 1-1275800854 1-0170801449 3-0188

802496 3-0044806240 2-2275807420 2-2275814566 22-2312845180 22-2312845198 2-22758803819 56-1857933356 1-0172

IHC124348R91 1-0170139764H1 1-1475147511H1 1-1475147512H1 1-1475150635R91 1-1475150635R92 1-1475150965R91 1-1475154073H1 3-0188174980C91 2-2275179867H1 3-0045

197035R91 1-1475200464C91 1-2075202347C91 1-1475202348C91 1-1475208959R91 1-0170210786R91 1-1475222431C91 1-0170222434C1 56-0666240204R91 3-0188337439R91 1-1475

347960R91 2-2275350254R91 1-1475357439R91 1-1475357606R91 1-1475363308R91 1-1475363312R91 1-1475363313R91 1-1475366312R91 1-1475366313R91 1-1475368730R91 1-1475

387097R91 3-0188399040C91 1-1475432473C91 1-1475447797C91 1-0170470077R91 3-0045474793R91 1-1875476674R91 1-1475480486R91 1-1275493849R91 3-0044509047R91 1-2075

511644R91 1-1475568102R91 18-7403569047R91 1-2075569262R91 1-1275581954R91 1-1875607917R91 1-2075609144R91 1-1275613471R91 2-2275627211C1 1-1475656224R91 2-2275

656225R91 1-2075659262R91 1-1275660116R91 2-2275661372R91 1-1475661677R91 1-1475663120R91 1-1475667496R91 1-2075

667558R91 1-2075669564R91 1-1275826057C1 10-4611913774R91 3-0188975663R92 1-0170983268R91 1-1475

1175-FHA 2-22751963-CHA 2-22752417-CHA 2-2275753772 1-2075A20684 1-1475A30408 1-1475A30425 1-1475A30435 1-1475A40106 2-2275A40435 1-1475B13270 1-2075B13272 1-1275

B13275 1-1275B15275 1-1275B18132 1-1475C12319 1-0170F50537 1-1475F61290 18-7403F85470 1-2075F95847 56-0626FH756924 1-2075FH845032 1-1275

H582437 1-0172H658179 56-0626H71167 1-1875R14744 2-2275T27790 2-2275T27791 22-1190T36575 1-1475T37173 1-1475T37895 2-2275T37922 3-0188

T40106 2-2275T41672 2-2275VTA3227 1-1475

J. I. CASE

JACOBSEN354749 1-0170500736 56-0666500737 1-0170500919 1-0170

JOHN DEEREAE-11027 1-1875AE-11033W 1-2075AE-14978E 1-1475AE-20831 22-2317AE-21122 2-2275AE-22753 1-2075AE-23516 2-2275AE-23716 1-1275

AE-26238 16-6409AE-30034 3-0045AE-679E 1-1475AE-793E 1-1475AH-18327 1-1475AH-79074 1-1475AH-83541 1-1475





134

INTERCHANGE

AJ-5729H 1-0170AJ-7330H 1-1475AJ-7331H 1-1475AJ-8815N 1-0170AL-1564N 1-1475AM-2568E 2-2275AM-2871E 1-1275AM-37004 1-1475AM-37184 1-0170AM-793E 1-1475

AP-24580 1-2075AP-24580H 1-2075AR-21101R 1-1475AU-13093U 2-2275AW-13174 1-1475ND-1915D 1-1475XAG-63796H 1-1475

LILLISTON01-61-019 20-930901-61-021 1-207504-61-121 1-187504-61-160 22-231204-61-168 2-227510-61-033 2-227511-61-011 1-017017-61-004 1-127523-61-007 2-227529-61-002 1-2075

149143 20-9309221613 1-2075720424 2-2275729010 3-0188729013 26-5321732324 1-1475737100 1-0170745121 10-4443

745234 1-0172747247 56-0666747250 10-4573747251 10-4139747252 1-0170774268 56-2604

LONG

1037427M91 10-41391037433M91 12-11901506100M91 2-22751508762M91 2-2275195379M91 3-004530516E1 1-012130517E1 1-032130518E1 1-042130673E1 10-517430674E1 10-5129

30675E1 10-513130679E1 16-612930680E1 16-613130681E1 12-134030683E1 12-131830688E1 44-210030691E1 20-9126

MASSEYFERGUSON

30692E1 20-913130695E1 22-134430698E1 22-134330699E1 22-132530703E1 26-515530707E1 44-220030710E1 56-229530711E1 56-2646315726M91 1-1475665137M91 1-2075

784489M91 1-1475830962M91 1-1275835501M918 2-2275835771M91 1-0170835790M91 1-2075835799M91 1-2075835991M91 2-2275836459M91 1-0170836461M91 1-1275836514M91 1-1475

836891M91 1-1475840676M91 2-2275840824M91 1-1475840824M92 1-1475840899M91 2-2275840899M92 2-2275841193M91 1-1475841193M92 1-1475841235M91 3-0045841236M91 1-1275

841237M91 1-2075841603M91 1-1275841604M91 1-2075

MCQUAY-NORRIS6R12 16-6111U03-1 1-1475U03-11 1-1275U03-12 2-2275

U03-44 1-2075U03-45 3-0045UO-52 10-0463UO3-101 22-1120UO3-103 16-6171UO3-105 12-1162UO3-106 20-9115UO3-107 12-1135UO3-109 16-6302UO3-111 12-1170

UO3-47 10-4133UO3-48 10-0423UO3-49 10-0443UO3-51 10-0453UO3-54 10-0452UO3-56 10-0493UO3-58 10-4143UO3-59 10-4473UO3-61 10-4183UO3-62 10-4193

UO3-65 10-0322UO3-66 10-0333UO3-67 10-0383UO3-68 10-0332UO3-70 10-1705UO3-73 22-1219UO3-77 16-6112

UO3-78 16-6215UO3-79 16-6216UO3-80 16-6218UO3-82 12-1115UO3-83 16-6409UO3-85 12-1218UO3-87 20-9132UO3-88 20-9120UO3-89 16-6114UO3-90 16-6134

UO3-91 16-6187UO3-92 22-1218UO3-94 64-2739UO3-95 12-1308UO3-98 20-9119

1587A 1-14752060D 1-1875

2107A 1-06162207A 1-01702207C 1-01722207E 1-01702525A 1-12752537A 1-20752593A 2-22752593ELB 2-22763287A 3-01883287C 2-0521

3575B 3-00444502A 3-0045MY1-150 10-3122MY1-83 10-3203MY1-93 10-3183MY2-13 10-4133MY2-93 10-1705MYI-12 10-0312MYI-22 10-0322MYI-23 10-0323

MYI-32 10-0332MYI-33 10-0333MYI-53 10-0383MYI-81 10-0381MYO-103 10-0423MYO-113 10-4473MYO-115 10-4183MYO-12 10-0412MYO-123 10-4123MYO-124 10-1574

MYO-13 10-0413MYO-150 10-0452MYO-22 10-0422MYO-23 10-0423MYO-43 10-0443MYO-53 10-0453MYO-63 10-0463MYO-73 10-0473MYO-81 10-0411MYO-83 10-0483

MYO-8393 10-4573MYO-93 10-0493MYO-95 10-4163MYO103113 10-5216MYO124125 10-1574MYO81 10-0432MYO8393 10-5215

MOTORMASTER

NEW HOLLAND126761 3-0188129437 1-2075131894 26-5321139842 1-0170142105 10-4573143984 26-5319167563 1-0171

222361 1-1475244947 1-017227993 1-147529214 2-227533661 1-017034754 20-930934761 1-207534780 22-231239360 1-127547612 18-7403

47621 1-187548263 1-1475512629 1-147552495 1-1475578805 3-0044625086 12-117266316 10-4139687115 2-2276709315 1-0172850616 18-7330

850617 20-9330855141 22-2330856190 10-5430856192 12-23309601705 18-74039601706 12-1190

010530 1-1275

011070 2-2275012014 1-2075012324 1-1475012716 1-12750777HSA 1-1475K-2550A 1-1475K-2964A 22-2312K-2980A 2-2275K-3339A 12-1190K-3347A 1-1275

K-3410A 1-2075K-3591A 1-2075K-3595A 1-2075K-3803A 1-1875K-4680A 12-1190

NEW IDEA

PRECISION1000 8-10121002 8-2012

1004 8-30121006 8-40121008 8-50121010 8-60121011 8-60211020 8-10081021 8-1010





135

INTERCHANGE

1022 8-20081023 8-20101024 8-30101026 8-40101027 8-40111028 8-50101029 8-50111030 8-60111033 8-30161034 8-4016

1035 8-50161036 8-60161041 8-10301042 8-20301043 8-30301044 8-40301045 8-50301046 8-60301051 8-10201052 8-2020

1053 8-30201054 8-40201055 8-50201056 8-60201061 70-01051062 70-02051064 70-04051065 70-05051071 70-01041072 70-0305

1073 70-03041075 70-05041076 70-07041081 50-01121082 50-04121085 50-05121106 55-93061120 55-93201121 55-93211124 55-2410

1126 55-26001128 55-28001132 55-32401154 55-36401155 55-21301177 73-13131187 70-25001190 53-26431200 12-13121203 12-1133

1206 12-11341209 12-11551211 12-11151216 12-11621219 12-11171221 12-11181224 12-11391226 12-11191229 12-11201230 12-1175

1231 12-12181241 65-28511242 12-11701243 12-11591244 12-11631247 12-11681249 64-2751

1254 12-11811257 12-11721259 12-23211263 12-13161265 12-11741266 12-23301272 12-13141275 12-11731277 73-10011287 70-1250

1291 12-11901292 12-11931293 12-13181294 12-13401300 20-91151305 20-93181308 20-93171310 20-93021312 20-91201313 20-9307

1314 20-91541316 20-92171317 20-92181319 20-93101322 20-91271326 20-91601347 65-28401349 64-27521352 20-91321353 20-9193

1366 20-93301367 20-93211374 20-91261375 20-91311387 70-20001390 53-20341408 44-24601412 44-28201414 44-20451426 26-5118

1428 26-51191442 44-22061447 65-44231449 64-44471450 44-63001452 44-22201453 44-22011454 44-21001455 44-22001460 44-4406

1461 44-44211472 26-53211473 26-53191485 70-27501501 1-01701502 1-01721504 56-18571511 10-41331512 10-04131513 10-0443

1516 10-44531518 10-04631519 10-04731521 10-45731524 10-04931526 10-44731527 10-4143

1529 10-41931530 10-41231534 10-04221537 10-04121539 10-04521544 11-27021546 10-04531548 10-04831549 11-59141551 11-1753

1552 10-41831560 10-42821566 10-41391576 71-08751577 71-10001579 71-12501581 72-07501582 72-08751583 72-10001584 71-0750

1585 72-10021587 72-11251588 50-25021589 50-25011600 8-21121630 8-21081631 8-21101632 8-24101636 8-24111641 8-2130

1642 8-22301643 8-01301644 8-23301646 8-24301651 8-21201652 8-22201653 8-01201654 8-23201656 8-24201661 70-2105

1662 70-22051666 70-24051671 70-21041672 70-22041676 70-24041703 10-47031751 10-03231752 10-03331754 10-03831755 10-3183

1756 10-31631759 10-03121760 10-03221761 10-31221763 10-03811772 10-31621800 22-11311801 22-11321803 22-11291805 22-1133

1806 22-11451811 22-11781812 22-11201813 22-13381814 22-12181815 22-12191820 22-1125

1825 22-11241827 22-11281842 22-11341843 22-13301847 65-26391849 64-25391852 22-23121852 22-23121853 22-23171857 22-1319

1870 22-23301871 22-35211877 73-11881887 70-21251900 16-61111904 16-61141916 16-63021921 16-64091921 16-64071923 16-6213

1924 16-62151926 16-62181927 16-62171935 16-61311949 64-16511952 16-06151960 16-06061977 73-07501987 70-1001331AG 3-0621

338 1-0170341AG 1-0221344AG 1-0421351 3-0188507 1-1875811 1-0121812 1-1001813 1-0321814 2-2421815 2-0521

860 1-1475880 1-2075888 3-0044889 3-0045964 2-2275995 1-1275

3NYR16-4 22-1131

3NYS22-8 22-114044RYQ21-1 44-210044RYR22-1 44-225644RYR24-4 44-246044RYR26-1 44-261044RYR28-2 44-282044RYS22-1A 44-222044RYS22-2 44-220644RYS22-21A 44-220155NY36-4 55-3640

55NYQ21-3 55-213055NYR24-1 55-241055NYR28 55-280055NYR32-4 55-324055NYS22-56A 55-932155NYS28-36 55-2836907-10-1 63-1254

ROCKWELL





136

INTERCHANGE

907-11-1 63-1266907-50-4 58-1227907-51-4 58-1239909-50-3 65-2828909-50-4 58-2028922-50-4 58-2229922-51-6 65-2639CP170X 1-0170CP188X 3-0188CP35R 2-2275

CP44R 3-0044CP55N 3-0045CPL12R 1-1275CPL14N 1-2075CPL6R 1-1475L12NY30-23 12-1308L12NYH18 12-1168L12NYH18-2 12-1173L12NYP16-20 12-1340L12NYP16-27 12-1197

L12NYP20-9 12-1318L12NYQ14-1 12-1113L12NYQ14-2 12-1170L12NYQ16-16 12-1314L12NYQ16-3 12-1159L12NYQ18-1 12-1163L12NYQ18-3 12-1148L12NYR12 12-1312L12NYR14-1 12-1133L12NYR16-13 12-1316

L12NYR16-23 12-1135L12NYR16-8 12-1115L12NYR16-9 12-1155L12NYR18-30 12-1162L12NYR19-3 12-1118L12NYR20 12-1218L12NYR20-15 12-1169L12NYR20-3 12-1174L12NYR22 12-1120L12NYR24-7 12-1175

L12NYS18-1 12-1181L12NYS20-7 12-1171L12NYS22-12 12-1172L12NYS22-16A 12-1193L14SY30-43 20-9131L14SYQ16-8 20-9310L14SYQ18 20-9183L14SYQ20 20-9127L14SYR16-6 20-9115L14SYR18-16 20-9117

L14SYR19-3 20-9118L14SYR20-17 20-9119L14SYR20-174 20-9218L14SYR20-47 20-9302L14SYR22-24A 20-9309L14SYR22-7 20-9120L14SYR23-4 20-9154L14SYR24-10 20-9307L14SYS22-16 20-9132L16SYQ16-1 22-1125

L16SYQ18-1 22-1190L16SYQ19-19 22-1344L16SYQ20-3 22-1128L16SYQ24 22-1130L16SYR-18-12 22-1132L16SYR19-2 22-1129L16SYR20-10 22-1218

L16SYR20-6 22-1133L16SYR22-10 22-1219L16SYR22-15 22-1155L16SYR23 22-1138L16SYR23 22-1178L16SYS18-1 22-1142L16SYS22-36 22-2317L16SYS22-3A 22-2312L16SYS22-46 22-1105L6NYH14-3 16-6303

L6NYQ12-3 16-6171L6NYQ18 16-6138L6NYR12-4 16-6111L6NYR13-6 16-6112L6NYR14-21 16-6213L6NYR15-12 16-6114L6NYR16-66 16-6215L6NYR18-8 16-6216L6NYR19-1 16-6217L6NYR20-38 16-6218

L6NYS18 16-6134L6NYS22-1A 16-6409RT2-14 70-2000RT2125-11 70-2125RT225-11 70-2250RT275-12 70-2750SH-Q12-16-72 73-0750SH-Q16-7-72 73-1001SQS100-72 72-1000SQS1187-72 73-1188

SQS125-72 73-1250SQS13125-72 73-1313SQS75-72 72-0750T-25-10-72 70-2500TU-Q16-4-72 70-1001TU-Q20-28-72 70-1250

SEALED POWER838-12 1-1275

838-14 1-2075838-2127 1-1875838-35 2-2275838-40012 10-0412838-40013 10-0413838-40023 10-1557838-40043 10-5313838-40063 10-5213838-40103 10-4143838-40113 10-4473

838-40115 10-4183838-41103 10-3163838-41122 10-0322838-41132 10-0332838-41133 10-0333838-41153 10-0383838-43093 10-5215838-43123 10-5218838-44 3-0044838-503 1-0170

838-55 3-0045838-570 1-0170838-588 3-0188838-68 1-1475

SPICER10-97 50-1503102701SF 11-2701102702SF 11-27021075XS 11-107512-91-72 71-075014-91-72 71-087516-91-72 71-10001630627200 70-2000175-3 11-17532-28-1127 20-9131

2-28222706 65-28282-4-102 20-91262-4-1263 20-91152-4-1363 20-91172-4-1413 20-93022-4-1423 20-91192-4-1463 20-93072-4-1623 20-91542-4-172 20-91272-4-1873 20-9120

2-4-192 20-93102-4-3041X 20-93092-4-3101 20-91322-4-3681 20-91802-4-4271 20-93112-4-6451X 20-93302-55-62 53-20342-82-83-3714X 65-284020-91-72 71-1250208565-4 58-1227

208565-4 58-1239228217-3316X 64-25392282173316 65-2639228226-3502X 64-2740228397X 56-2004228397X 56-2300229291X 56-1857230565-72 73-1001230566-72 72-1000230575-72 72-0875

230579-72 73-0750230590-72 72-0750230591 72-1125278269-72 73-1188278635-72 73-1313278814-72 70-10013-16-203 56-26463-26-467 22-13253-26-587 26-51553-28-667 22-1319

3-4-1003 22-11783-4-10391X 22-23123-4-10411X 22-23163-4-1143 22-11623-4-1173 26-51193-4-12 22-13443-4-1323 26-51183-4-1353 22-11553-4-182 26-51483-4-32 22-1190

3-4-4-131X 44-22203-4-4-91 44-22063-4-5071 22-11423-4-5101 22-11343-4-5131X 22-11053-4-52 22-11253-4-5501 22-1330

1-28-277 12-13081-28-277 12-13341-4-1011X 12-11931-4-1091 12-11811-4-162 12-13401-4-182 12-13011-4-222 12-1163

1-4-242 12-11971-4-262 12-13181-4-2923 12-13121-4-2983 12-11341-4-3003 12-11151-4-3043 12-13261-4-3063 12-11171-4-3083 12-11181-4-3093 12-11761-4-3113 12-1119

1-4-3133 12-11201-4-3153 12-11751-4-861 12-11711-4-881X 12-11901-4-981 12-11721-60-34-3519X 64-275110-191 50-150110-2-29 10-102210-3-122X 10-312210-3-12X 10-0312

10-3-162X 10-316210-3-163X 10-316310-3-183X 10-318310-3-22X 10-032210-3-23X 10-032310-3-32X 10-033210-3-33X 10-033310-3-81X 10-038110-3-83X 10-038310-4-103 10-4103

10-4-113 10-411310-4-12 10-041210-4-123 10-412310-4-13 10-041310-4-133 10-413310-4-1363 10-436310-4-143 10-414310-4-173 10-417310-4-183 10-418310-4-193 10-4193

10-4-22 10-042210-4-23 10-042310-4-282 10-428210-4-43 10-044310-4-443 10-444310-4-453 10-445310-4-473 10-447310-4-481 10-448110-4-52 10-045210-4-53 10-0453

10-4-573 10-457310-4-611SX 10-461110-4-63 10-046310-4-73 10-047310-4-83 10-048310-4-93 10-049310-8 50-1502





137

INTERCHANGE

3-4-6171 26-51383-4-6481X 26-53213-4-6511X 22-23173-4-6771X 26-53193-4-72 22-11283-4-723 22-11313-4-743 22-11323-4-783 22-11333-4-793 22-12183-4-813 22-1219

3-4-833 22-11203-55-182 53-26443.4-4-12 44-21003.4-4-173 44-22563.4-4-183 44-24603.4-4-193 44-28203.4-4-23 44-26103.4-4-41X 44-22014714X 11-47145-103X 1-0170

5-110X 1-01725-129X 1-20755-170X 1-01705-188X 3-01885-2011X 1-18755-242X 1-12755-243-1X 2-22765-243X 2-22755-430X 1-06165-431X 3-0044

5-432X 3-00455-88X 2-05215-92X 1-1475500007-22 50-1504500007-24 50-1505500541-7 50-2501500570-6 50-25025914X 11-5914

TOWMOTOR6D2529 1-18758D1508 1-0170

TRW(See Federal Mogul/TRW)

WABCO404645 1-1275

427271 1-1475474804 1-2075723741 1-1275SR-6109 1-1475TG-4614 1-1475VA-1775 1-1475

WALTERSCHEIDAGMASTER

1-4-262 12-13181-4-2923 12-13121-4-3003 12-11151-4-3043 12-13261-4-3063 12-11171-4-3083 12-11481-4-3083 12-11181-4-3093 12-11761-4-3113 12-11191-4-3133 12-1120

1-4-3153 12-11751-4-861 12-11711-4-881X 12-11901-4-981 12-117210.01.00 1-100110-3-122X 10-312210-3-163X 10-316310-3-183X 10-318310-3-22X 10-032210-3-23X 10-0323

10-3-32X 10-033210-3-33X 10-033310-3-81X 10-038110-3-83X 10-038310-4-103 10-042310-4-12 10-041210-4-123 10-412310-4-13 10-041310-4-133 10-413310-4-1363 10-4363

10-4-143 10-414310-4-173 10-417310-4-183 10-418310-4-193 10-419310-4-22 10-042210-4-23 10-042310-4-282 10-428210-4-43 10-044310-4-453 10-445310-4-473 10-4473

10-4-481 10-448110-4-52 10-045210-4-53 10-045310-4-573 10-457310-4-63 10-046310-4-73 10-047310-4-93 10-049311.03.00 1-032116-30-62 70-200016-91-72 71-1000

2-28-1127 20-91312-4-102 20-91262-4-1263 20-91152-4-1363 20-91172-4-1413 20-93022-4-1423 20-91192-4-1463 20-93072-4-1623 20-91542-4-172 20-91272-4-1873 20-9120

2-4-192 20-93102-4-2663 20-91602-4-3041X 20-93092-4-3101 20-913220-91-72 71-125020.00.00 1-022121.00.00 1-042122-30-32 70-2750

229381X0 12-2330229382X0 20-9330229383X0 22-2330229387X0 12-2321229389X0 22-3521230566-72 72-1000230591 72-1125278635-72 73-1313278814-72 70-10013-16-203 56-2646

3-26-467 22-13253-26-587 26-51553-4-1003 22-11783-4-10391X 22-23123-4-1143 22-11623-4-1173 26-51193-4-12 22-13443-4-1323 26-51183-4-1773 22-13373-4-182 26-5148

3-4-32 22-11903-4-4-12 44-21003-4-4-131X 44-22203-4-4-183 44-24603-4-4-41X 44-22013-4-5071 22-11423-4-5101 22-11343-4-5131X 22-11053-4-52 22-11253-4-5501 22-1330

3-4-6171 26-51383-4-6481X 26-53213-4-6511X 22-23173-4-6771X 26-53193-4-72 22-11283-4-723 22-11313-4-743 22-11323-4-783 22-11333-4-793 22-12183-4-813 22-1219

3-4-833 22-11203-55-182 53-264435.00.00 2-242136.00.00 3-252136.10.00 8-251236.10.02 8-252136.13.100 8-253036.14.100 8-252036.18.02 8-251436.22.101 8-2525

36.24.100 8-251536.24.102 8-253536.24.106 8-25115-430X 1-0616HM129 1-2075HM188 3-0188HM242 1-1275HM243 2-2275HM431 3-0044

026740 3-25211-28-277 12-13341-4-1011X 12-11931-4-1091 12-11811-4-162 12-13401-4-182 12-13011-4-222 12-11631-4-242 12-1197

10001448 65-284010003548 65-263910004448 65-4423101-3506 22-2330101-3521 22-3521101-4406 44-4406102-0606 16-6409102-0621 16-0621102-1006 10-4139102-1206 12-1190

102-1221 12-1193102-1406 20-9309102-1421 20-9325102-3506 22-2312102-3521 22-2317102-4406 44-2220102-4420 44-6300102-4421 44-2201102-5506 55-9306102-5521 55-9321

102-6106 8-1012102-6121 8-1021102-6506 8-5012102-6521 8-5021102-6706 8-7012102-6720 8-7014102-6721 8-7021102-6806 8-8012102-6820 8-8014102-6821 8-8021

102-7106 8-2112102-7121 8-2121102-7621 8-2421102-7906 8-2512102-7920 8-2514102-7921 8-2521102-8206 8-2012102-8221 8-2021102-8306 8-3012102-8321 8-3021

102-8406 8-4012102-8421 8-4021102-8606 8-6012102-8621 8-6021104-1206 12-2506104-3506 22-9506105-0615 16-0615106-0615 16-161511000648 65-165111001248 64-2739

11001448 64-274011001460 64-275211003548 64-255111004448 64-444713002006 56-1857200-0600 1-1475200-0675 1-0170200-1000 1-0170200-1200 1-1275200-1400 1-2075

200-1875 1-1875200-2600 3-0188200-3500 2-2275200-4400 3-0044200-5500 3-0045200-6154 1-0121200-6580 2-0521200-6794 3-0721

WEASLER100-0606 16-0606100-1206 12-2330100-1221 12-2321100-1406 20-9330100-1421 20-932110000648 65-165110001248 65-2851





138

INTERCHANGE

200-6806 3-0821200-7155 1-1001200-7676 2-2421200-7989 3-2521200-8261 1-0221200-8370 1-0321200-8474 1-0421200-8692 3-0621300-0600 16-6129300-1200 12-1340

300-1400 20-9126300-3500 22-1344300-4400 44-2100300-5500 55-2130300-6126 8-1030300-6229 8-2030300-6336 8-3030300-6436 8-4030300-6545 8-5030300-6645 8-6030

300-6745 8-7030300-6854 8-8030300-7123 8-2130300-7234 8-2230300-7334 8-0130300-7434 8-2330300-7639 8-2430300-7957 8-2530400-7284 70-2205400-0012 72-0750

400-0016 72-1000400-0019 73-1188400-0020 73-1250400-0021 73-1313400-1214 73-0750400-1618 73-1001400-6126 70-0105400-6229 70-0205400-6436 70-0405400-6545 70-0505

400-6745 70-0705400-7123 70-2105400-7539 70-2405500-1400 53-2034500-3500 53-2435500-4400 53-2643501-3500 53-3500508-1080 50-1080508-1090 50-1090508-1280 50-1280

510-0600 53-0635600-1618 70-1001600-2022 70-1250600-6133 70-0104600-6236 70-0305600-6343 70-0304600-6552 70-0504600-6654 70-0704600-6863 70-0804600-7130 70-2104

600-7241 70-2204600-7548 70-2404602-3500 70-2125602-4400 70-2500700-0600 16-6131700-1200 12-1318700-1400 20-9313700-6133 8-1020

700-6236 8-2020700-6343 8-3020700-6443 8-4020700-6552 8-5020700-6654 8-6020700-6754 8-7020700-6863 8-8020700-7130 8-2120700-7241 8-2220700-7341 8-0120

700-7441 8-2320700-7648 8-2420700-7961 8-2520701-0600 16-6132701-1200 12-1334701-1400 20-9131701-3500 22-1325701-4400 44-2200701-5500 55-3640702-3500 22-1307

703-3500 22-1343800-0510 10-4373800-0512 10-0413800-0610 16-6210800-0612 16-6111800-0613 16-6112800-0614 16-6213800-0615 16-6114800-0616 16-6215800-0619 16-6217

800-0620 16-6218800-1212 12-1312800-1213 12-1112800-1214 12-1113800-1216 12-1115800-1218 12-1326800-1219 12-1118800-1220 12-1176800-1222 12-1120800-1416 20-9115

800-1418 20-9117800-1419 20-9118800-1420 20-9119800-1422 20-9120800-1423 20-9154800-1424 20-9307800-2622 26-5118800-2624 26-5119800-2628 26-5131800-3516 22-1131

800-3518 22-1132800-3519 22-1129800-3520 22-1133800-3522 22-1118800-3523 22-1178800-3524 22-1120800-3526 22-1338800-3528 22-1316800-4422 44-2256800-4423 44-2360

800-4424 44-2460800-4426 44-2610800-4428 44-2820800-4432 44-3200800-5524 55-2410800-5526 55-2600800-5528 55-2800800-5532 55-3240

800-6108 8-1008800-6110 8-1010800-6510 8-5010800-6511 8-5011800-6722 8-7011800-6822 8-8011800-6824 8-8015800-6828 8-8016800-7610 8-2410800-7922 8-2511

800-7924 8-2515800-8208 8-2008800-8210 8-2010800-8310 8-3010800-8410 8-4010800-8411 8-4011800-8610 8-6010800-8611 8-6011801-0506 10-0431801-0518 10-0411

801-0606 16-6187801-0618 16-6134801-1206 12-1172801-1218 12-1181801-1221 12-1315801-1406 20-9132801-1418 20-9180801-1420 20-9311801-1421 20-9193801-3506 22-1134

801-3506 22-1138801-3518 22-1132801-3521 22-1330801-4406 44-2206801-4421 44-2221802-0616 16-6516802-0618 16-6518802-0620 16-6165802-1216 12-1319802-1218 12-1302

802-1220 12-1330802-1222 12-1320802-1418 20-9318802-1420 20-9317802-1422 20-9160802-1424 20-9320802-3520 22-1145802-3522 22-1337802-3524 22-1162802-6535 8-5016

802-7108 8-2108802-7110 8-2110802-7611 8-2411802-7922 8-2525802-7924 8-2535802-8335 8-3016802-8435 8-4016802-8611 8-6016803-1400 48-9202803-3500 48-1181

804-0512 10-0422804-0514 10-0412804-0516 10-0452804-0612 16-6171804-0614 16-6302804-0616 16-6302804-0618 16-6138804-0620 16-6127

804-1012 10-0422804-1014 10-0412804-1016 10-0452804-1214 12-1170804-1216 12-1163804-1218 12-1148804-1220 12-1321804-1414 20-9310804-1418 20-9183804-1420 20-9127

804-3516 22-1125804-3518 22-1124804-3519 22-1190804-3520 22-1128804-3526 22-1126804-4418 44-1826805-1014 10-3162805-1018 10-0332805-1218 12-1328805-1420 20-9191

806-0514 10-5213806-0516 10-5215806-0518 10-5216806-0520 10-5218806-0614 16-6213806-0616 16-6215806-0618 16-6216806-0620 16-6218806-1216 12-1215806-1218 12-1216

806-1220 12-1218806-1418 20-9216806-1420 20-9218806-3520 22-1218806-3522 22-1219806-4420 44-2045806-4424 44-2456807-0616 16-6616807-5520 55-2836808-0612 16-6176

808-0614 16-6178900-0648 69-0648900-1248 69-1248900-2648 69-2648900-3548 69-2248920-1200 56-2004

WOODS10938 22-2317

110 2-2275115 22-231214061 26-515514065 26-532114066 3-018814105 3-0188148 20-9309154 1-20752437 1-127528920 12-1190

30550 56-185731753 12-118132424 44-222032429 44-220165334 12-233065335 56-300165689 1-0170

N10-28-17 Use 10-2817N10-3-1769X Use 10-1769N10-3-18KX Use 10-0318N10-4-1532 Use 10-1532N10-4-1559 Use 10-1559N10-4-373 Use 10-437315-0615 Use 10-061515-5111 Use 10-041315-5112 Use 10-417315-5113 Use 10-511315-5114 Use 10-047315-5115 Use 10-457315-5116 Use 10-447315-5117 Use 10-415315-5118 Use 10-419315-5123 Use 10-512315-5124 Use 10-049315-5125 Use 10-412315-5129 Use 10-512915-5131 Use 10-513115-5132 Use 10-513215-5134 Use 10-041115-5136 Use 10-494315-5138 Use 10-155715-5148 Use 10-175815-5149 Use 10-514915-5154 Use 10-444315-5156 Use 10-515615-5157 Use 10-032315-5158 Use 10-515815-5159 Use 10-038115-5164 Use 10-449315-5169 Use 10-176515-5171 Use 10-042215-5172 Use 10-043215-5173 Use 10-033215-5174 Use 10-517415-5175 Use 11-107515-5176 Use 10-031215-5178 Use 10-032215-5183 Use 10-031315-5184 Use 10-033315-5185 Use 10-320315-5186 Use 10-0383

15-5187 Use 10-043115-5189 Use 10-041215-5191 Use 10-416315-5193 Use 10-045215-5196 Use 10-414315-5197 Use 10-411315-5199 Use 10-318315-5213 Use 10-521315-5215 Use 10-521515-5216 Use 10-521615-5217 Use 10-157415-8218 Use 10-521815-5275 Use 10-527515-5303 Use 10-530315-5305 Use 10-312215-5313 Use 10-531315-5315 Use 10-046315-5319 Use 10-042315-5322 Use 10-532215-5331 Use 10-533115-5334 Use 10-533415-5335 Use 10-418315-5336 Use 10-437315-5338 Use 10-316315-5339 Use 10-410315-5341 Use 10-176915-5345 Use 10-469315-5347 Use 10-170315-5349 Use 10-170515-5352 Use 10-535215-5354 Use 10-535415-5355 Use 10-170715-5361 Use 10-536115-5363 Use 10-158015-5366 Use 10-536615-5373 Use 10-428215-5374 Use 10-429315-5377 Use 10-316215-5407 Use 10-413715-5409 Use 10-413915-5411 Use 10-541115-5412 Use 10-541215-5430 Use 10-543051-5275 Use 11-1750

1-0675 Use 1-01701-0676 Use 1-01721-0677 Use 1-0171

Neapco 0600 to N1000 Universal Joint Supersession Listing

Neapco 0600 to N1000 PTO Yoke Supersession Listing

New PTO Drive Shaft Assemblies

Product Announcement

METRIC Replacement driveshafts for Bondioli and Pavesi Metric series 2 through 8

Warning: The inner profile tube must engage the outer profile tube 1/2 it's overall length

at the maximum extended position.

A B C

Part

Number

Compressed

Length

Compressed

Length

Tractor QD

Pin yoke

Bore

Metric

Series

Reference

Universal

Joint

mm in. mm in.

8-0100 1010 39.76 1107 43.58 1.375 X 6 Spl 2 1-02218-0101 1310 51.57 1407 55.39 1.375 X 6 Spl 2 1-02218-0102 1060 41.73 1162 45.75 1.375 X 6 Spl 3 1-03218-0103 1360 53.54 1462 57.56 1.375 X 6 Spl 3 1-03218-0104 1060 41.73 1169 46.02 1.375 X 6 Spl 4 1-04218-0105 1360 53.54 1469 57.83 1.375 X 6 Spl 4 1-04218-0106 1010 39.76 1122 44.17 1.375 X 6 Spl 5 2-05218-0107 1310 51.57 1422 55.98 1.375 X 6 Spl 5 2-0521

OVER -Continued on next page!

New PTO Drive Shaft Assemblies (cont’d)


METRICReplacement driveshafts for Bondioli and Pavesi Metric series 2 through 8

A B C

Part

Number

Compressed

Length

Compressed

Length

Tractor QD

Pin yoke

Bore

Metric

Series

Reference

Universal

Joint

mm in. mm in.

8-0108 1010 39.76 1132 44.57 1.375 X 6 Spl 6 3-06218-0109 1310 51.57 1432 56.38 1.375 X 6 Spl 6 3-06218-0110 1010 39.76 1132 44.57 1.375 X 6 Spl 7 3-07218-0111 1310 51.57 1432 56.38 1.375 X 6 Spl 7 3-07218-0112 960 37.80 1085 42.72 1.375 X 6 Spl 8 3-08218-0113 1260 49.61 1385 54.53 1.375 X 6 Spl 8 3-0821



New PTO CV Drive Shaft Assembly

A B C D

Part

Number

Compressed

Length

Compressed

Length

Tractor QD

Collar yoke

Bore

Implement

QD Pin yoke

Bore

Metric Series

mm in. mm in.

8-0200 1310 51.57 1539 60.59 1.375 X 6 Spl 1.375 X 6 Spl Walterscheid 2480



Note: 2480 series is the 80 degree CV designation

for Walterscheid 2400 series.




METRIC — W50Replacement 80 degree W50 CV driveshafts for Walterscheid series 2480

New PTO CV Drive Shaft Assembly

Note: 2580 series is the 80 degree CV designation

for Walterscheid 2500 series.

A B C D

Part

Number

Compressed

Length

Compressed

Length

Tractor QD

Collar yoke

Bore

Implement

QD Pin yoke

Bore

Metric Series

mm in. mm in.







METRIC — W65Replacement 80 degree W65 CV driveshafts for Walterscheid series 2580

New PTO Implement Yoke

Series1 B&P = Bondioli & PavesiSeries1 W = Walterscheid


METRIC — Round Bore Keyway

A B C D

Part

Number

Bore Length Keyway

width

Set

screw

thread

Set screw

dist. to

end

Series1 Ref.

U-Joint

mm in. mm in.

8-0500 30 mm 79 3.11 10 mm M10 15 0.59 B & P 1 1-0121

8-0518 25 mm 79 3.11 8 mm M10 15 0.59 W 2100 1-1001

8-0519 30 mm 79 3.11 8 mm M10 15 0.59 W 2100 1-1001

8-0509 25 mm 82 3.23 8 mm M10 20 0.79 B & P 2,W 2200

1-0221

8-0508 1.125 in. 82 3.23 .25 in. .375 - 16 20 0.79 B & P 2,W 2200

1-0221

8-0510 30mm 82 3.23 8 mm M10 20 0.79 B & P 2,W 2200

1-0221

8-0507 1.375 in. 82 3.23 .312 in. .375 - 16 20 0.79 B & P 2,W 2200

1-0221

8-0511 1.188 in. 85 3.35 .312 in. .375 - 16 20 0.79 B & P 3,W I

1-0321

OVER -Continued on next page!



METRIC — Round Bore Keyway

A B C D

Part

Number

Bore Length Keyway

width

Set

screw

thread

Set screw

dist. to

end

Series1 Ref.

U-Joint

mm in. mm in.

8-0513 30 mm 98 3.86 8 mm M10 20 0.79 B & P 4,W 2300

1-0421

8-0512 1.50 in. 98 3.86 .375 in. .375 - 16 20 0.79 B & P 4,W 2300

1-0421

8-0505 40 mm 96 3.78 12 mm M12 20 0.79 W 2400 2-2421

8-0501 1.50 in. 96 3.78 .375 in. .375 - 16 20 0.79 B & P 5 2-0521

8-0506 35 mm 105 4.13 10 mm M12 25 0.98 W 2500 3-2521

8-0514 1.50 in. 105 4.13 .375 in. .375 - 16 20 0.79 B & P 6,W 220

3-0621

8-0516 40 mm 105 4.13 12 mm M12 20 0.79 B & P 6,W 220

3-0621

8-0515 1.75 in. 105 4.13 .375 in. .375 - 16 20 0.79 B & P 6,W 220

3-0621

8-0502 2.00 in. 120 4.72 .50 in. .375 - 16 25 0.98 B & P 8 3-0821

8-0503 1.375 in. 130 5.12 .312 in. .375 - 16 25 0.98 B & P 9 3-0921

8-0504 1.50 in. 130 5.12 .375 in. .375 - 16 25 0.98 B & P 9 3-0921



METRIC — Round Bore Shear Bolt

A B C D

Part

Number

Bore Length Bolt

hole

dia.

Bolt hole

dist. to end

mm

Series1 Ref.

U-Joint

mm in. mm in.

8-0517 1.25 in. 79 3.11 .375 in. 15 0.59 B & P 1 1-01218-0521 1.25 in. 82 3.23 .375 in. 15 0.59 B & P 2, W 2200 1-02218-0522 1.375 in. 82 3.23 .375 in. 15 0.59 B i& P 2, W 2200 1-02218-0524 25 mm 85 3.35 8 mm 20 0.79 B & P 3, W I 1-03218-0525 30 mm 85 3.35 10 mm 20 0.79 B & P 3, W I 1-03218-0523 1.25 in. 85 3.35 .375 in. 20 0.79 B & P 3, W I 1-03218-0527 30 mm 98 3.86 10 mm 20 0.79 B & P 4, W 2300 1-04218-0526 1.25 in. 98 3.86 .375 in. 20 0.79 B & P 4, W 2300 1-04218-0520 40 mm 96 3.78 13 mm 20 0.79 W 2400 2-24218-0528 1.25 in. 105 4.13 .375 in. 20 0.79 B & P 6, W 220 3-0621


New PTO Inner/Outer Profile Yoke

A B C

Part

Number

Type Bore mm Length Tube

pin

hole

Ref.

tube

pin part

number

Ref.

profile

tube

Metric

Series

Ref.

U-Joint

mm in. mm in. mm in.

8-0600 Inner Profile

54 2.13 130 5.12 12 0.47 50-1280 70-0704 9 3-0921

8-0650 Outer Profile

63 2.48 130 5.12 12 0.47 50-1280 70-0804 9 3-0921


METRIC Replacement Bondioli and Pavesi Metric series 9 Inner and Outer Profile Yokes

New PTO Over Running Clutch Yoke


METRICMetric series Over Running Clutch Yokes, QD Collar type

B C D

Part

Number

Bore Length Housing

length

Housing

diameter

Series1 Ref.

U-Joint

mm in. mm in. mm in.

8-0451 1.375 X 6 Spl 154 6.06 54 2.13 91 3.58 B & P 4,W 2300

1-0421

8-0450 1.375 X 6 Spl 157 6.18 54 2.13 91 3.58 W 2400 2-24218-0452 1.375 X 6 Spl 167 6.57 54 2.13 91 3.58 B & P 6,

W 2203-0621

Note: Right hand rotation


New PTO Radial Pin Clutch Yoke


METRICMetric series Radial Pin Clutch Yokes, QD Collar type

B C DPart

NumberBore Length Housing

LengthHousing Diameter

TorqueRating

Series 1 Ref. U-Joint

mm in. mm in. mm in. Nm Ft lb8-0403 1.375 X 6 Spl 138 5.43 57 2.24 95 3.74 600 442.5 B&P 2,

W 22001-0221

8-0400 1.375 X 6 Spl 142 5.59 57 2.24 95 3.74 600 442.5 B&P 3,W I

1-0321

8-0401 1.375 X 6 Spl 142 5.59 57 2.24 95 3.74 600 442.5 B&P 4,W 2300

1-0421

8-0402 1.375 X 6 Spl 165 6.50 76 2.99 95 3.74 900 663.8 B&P 5 2-0521


New PTO Tractor Yoke

B

Part

Number

Bore Length Metric

Series

Reference

Universal

Joint

mm in.

8-0303 1.750 X 20 Spl 122 4.80 6 3-06218-0300 1.375 X 6 Spl 126 4.96 9 3-09218-0301 1.750 X 20 Spl 126 4.96 9 3-09218-0302 1.375 X 21 Spl 126 4.96 9 3-0921


METRICReplacement Bondioli &Pavesi Metric series 6 and 9 Pin Type Quick Disconnect Tractor Yokes

56-0200 PTO Slide Collar Quick Disconnect Repair Kit

New Part Announcement

The 56-0200 Slide Collar kit is a service part utilized to repair thetractor attaching yoke on all our metric 80 degree CV shaft assemblies.The following CV shaft assemblies would have this slide collar on the tractor end: 8-0200, 8-0201, 8-0202, 8-0203, 8-0204 and 8-0205. In addition to servicing the metric CV assemblies, this repair kit will fit all Benzi Di Terlizzi slide collar Q.D. yokes with 1.375-6 spline and 1.375-21 spline.

New Metric Universal Joints2-2480 & 3-2580

Part

Number

Yoke

Lock-up

Bearing

Diameter

Bearing

Type

Lube

Fitting

U-Joint

Series

2-2480 2.561 (O)3.859 (O)

1.2601.063

RoundOSR

InCross

WALTERSCHEID 2480

3-2580 3.504 (O)4.330 (O)

1.4171.260

RoundOSR

In Cross & Bearing

WALTERSCHEID 2580

The 2-2480 and 3-2580 universal joints are service replacement parts for the 80 degree CV head on the W50 and W65 PTO CV Drive Shaft Assemblies.

W50 - Part numbers 8-0200, 8-0201, and 8-0202 utilize two 2-2480 universal joints per assembly.

W65 - Part numbers 8-0203, 8-0204, and 8-0205 utilize two 3-2580 universal joints per assembly.

New Part Announcement

Neapco Driveline & Axle Parts Catalog...cardan universal joint replacement shafts for the early failures experienced with 6-ball constant velocity-style high-speed propshafts. Specialty

Documents