This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report is an Kaycha Labs certification. The results relate only to the material or product analyzed. Test results are confidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batch material may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter, ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) and Limit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured by an analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholds for human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty of measurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for the pass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310. Sue Ferguson Lab Director State License # n/a ISO Accreditation # 17025:2017 ___________________ Signature 03/12/2021 ___________________ Signed On 10427 Cogdill Road, Suite 500 Knoxville, TN, 37932, US Kaycha Labs Northern Lights D8 N/A Matrix: Derivative Certificate of Analysis Sample:KN10308007-003 Harvest/Lot ID: NLTS-D8-01 Seed to Sale #N/A Batch Date :03/04/21 Batch#: NLTS-D8-01 Sample Size Received: 10 gram Total Weight/Volume: N/A Retail Product Size: 1 gram Ordered : 03/04/21 sampled : 03/04/21 Completed: 03/12/21 Expires: 03/12/22 Sampling Method: SOP Client Method Mar 12, 2021 | Evolved, LLC 61875 Broken Top Dr. #26 Bend, OR, 97702, US PASSED Page 1 of 4 PRODUCT IMAGE SAFETY RESULTS MISC. Pesticides PASSED Heavy Metals PASSED Microbials NOT TESTED Mycotoxins NOT TESTED Residuals Solvents PASSED Filth NOT TESTED Water Activity NOT TESTED Moisture NOT TESTED Terpenes NOT TESTED CANNABINOID RESULTS Total THC 0.267% Total CBD 0.043% Total Cannabinoids 80.279% CBDV CBDA CBGA CBG CBD THCV CBN D9-THC D8-THC CBC THCA ND ND 0.015% ND 0.043% 0.015% 0.037% 0.267% 79.889 % 0.011% ND ND ND 0.150 mg/g ND 0.430 mg/g 0.150 mg/g 0.370 mg/g 2.670 mg/g 798.890 mg/g 0.110 mg/g ND LOD 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 % % % % % % % % % % % Cannabinoid Profile Test Analyzed by Weight Extraction date : Extracted By : 113 0.2035g 03/10/21 09:03:27 113 Analysis Method -Expanded Measurement of Uncertainty: Flower Matrix d9-THC:12.7%, THCa: 9.5%, TOTAL THC 11. 1%. These uncertainties represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor k=2 for a normal distribution. Reviewed On - 03/10/21 16:42:03 Batch Date : 03/09/21 11:51:54 Analytical Batch -KN000539POT Instrument Used : HPLC E-SHI-008 Reagent Dilution Consums. ID 120320.R02 40 00298878 031021.R01 200331059 030321.R01 947.217 Full spectrum cannabinoid analysis utilizing High Performance Liquid Chromatography with UV detection (HPLC-UV). (Method: SOP.T.30.050 for sample prep and Shimadzu High Sensitivity Method SOP.T.40.020 for analysis.). *Based on FL action limits.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Sue FergusonLab Director
State License # n/aISO Accreditation #
17025:2017___________________Signature
03/12/2021
___________________Signed On
10427 Cogdill Road, Suite 500Knoxville, TN, 37932, US
Kaycha LabsNorthern Lights D8
N/AMatrix: Derivative
Certificateof Analysis
Sample:KN10308007-003Harvest/Lot ID: NLTS-D8-01
Seed to Sale #N/ABatch Date :03/04/21
Batch#: NLTS-D8-01Sample Size Received: 10 gram
Total Weight/Volume: N/ARetail Product Size: 1 gram
Cannabinoid Profile TestAnalyzed by Weight Extraction date : Extracted By :113 0.2035g 03/10/21 09:03:27 113Analysis Method -Expanded Measurement of Uncertainty: Flower Matrixd9-THC:12.7%, THCa: 9.5%, TOTAL THC 11. 1%. These uncertaintiesrepresent an expanded uncertainty expressed at approximately the 95%confidence level using a coverage factor k=2 for a normal distribution.
Reviewed On -03/10/2116:42:03 Batch Date : 03/09/21 11:51:54
Analytical Batch -KN000539POT Instrument Used : HPLC E-SHI-008
Reagent Dilution Consums. ID
120320.R02 40 00298878031021.R01 200331059030321.R01 947.217Full spectrum cannabinoid analysis utilizing High Performance Liquid Chromatography with UV detection (HPLC-UV). (Method: SOP.T.30.050 forsample prep and Shimadzu High Sensitivity Method SOP.T.40.020 for analysis.). *Based on FL action limits.
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Sue FergusonLab Director
State License # n/aISO Accreditation #
17025:2017___________________Signature
03/12/2021
___________________Signed On
10427 Cogdill Road, Suite 500Knoxville, TN, 37932, US
Kaycha LabsNorthern Lights D8
N/AMatrix : Derivative
Certificate of Analysis PASSEDEvolved, LLC
61875 Broken Top Dr. #26Bend, OR, 97702, USTelephone: 9493387078Email: [email protected]
Pesticide screen is performed using LC-MS which can screen down to below single digit ppb concentrationsfor regulated Pesticides. Currently we analyze for 57 Pesticides. (Method: SOP.T.30.060 Sample Preparationfor Pesticides Analysis via LCMSMS and SOP.T40.060 Procedure for Pesticide Quantification Using LCMS).Analytes ISO pending. *Based on FL action limits. *
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Sue FergusonLab Director
State License # n/aISO Accreditation #
17025:2017___________________Signature
03/12/2021
___________________Signed On
10427 Cogdill Road, Suite 500Knoxville, TN, 37932, US
Kaycha LabsNorthern Lights D8
N/AMatrix : Derivative
Certificate of Analysis PASSEDEvolved, LLC
61875 Broken Top Dr. #26Bend, OR, 97702, USTelephone: 9493387078Email: [email protected]
Analyzed by Weight Extraction date Extracted By138 0.02108g 03/10/21 02:03:56 138
Analysis Method -SOP.T.40.032Analytical Batch -KN000547SOL Reviewed On - 03/12/21 16:12:28Instrument Used : E-SHI-106 Residual SolventsRunning On : 03/11/21 11:21:04Batch Date : 03/10/21 10:27:26
Reagent Dilution Consums. ID
Residual solvents screening is performed using GC-MS which can detect belowsingle digit ppm concentrations. Currently we analyze for 22 residual solvents.(Method: SOP.T.40.032 Residual Solvents Analysis via GC-MS). Analytes ISOpending. *Based on FL action limits.
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Sue FergusonLab Director
State License # n/aISO Accreditation #
17025:2017___________________Signature
03/12/2021
___________________Signed On
10427 Cogdill Road, Suite 500Knoxville, TN, 37932, US
Kaycha LabsNorthern Lights D8
N/AMatrix : Derivative
Certificate of Analysis PASSEDEvolved, LLC
61875 Broken Top Dr. #26Bend, OR, 97702, USTelephone: 9493387078Email: [email protected]
Analyzed by Weight Extraction date Extracted By12 0.2655g 03/12/21 12:03:24 12
Analysis Method -SOP.T.40.050, SOP.T.30.052Analytical Batch -KN000542HEA | Reviewed On - 03/12/21 12:34:06Instrument Used : Metals ICP/MSRunning On :Batch Date : 03/09/21 14:11:35
Heavy Metals screening is performed using ICP-MS (Inductively Coupled Plasma – MassSpectrometer) which can screen down to below single digit ppb concentrations for regulated heavymetals using Method SOP.T.30.052 Sample Preparation for Heavy Metals Analysis via ICP-MS andSOP.T.40.050 Heavy Metals Analysis via ICP-MS. Analytes ISO Pending. *Based on FL action limits.