www.resemin.com MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding. Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW). Full 360°, horizontal coverage with parallel holding is 1.44 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm. Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling. Applications: • Sub Level Caving, benching • Sub Level Stoping • VCR and cable bolting
4
Embed
MUKI LHP - Gladiator Equipment · 2016. 7. 7. · MUKI LHP Production long hole rig for narrow veins MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.resemin.com
MUKI LHPProduction long hole rig for narrow veins
MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding.
Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW).
Full 360°, horizontal coverage with parallel holding is 1.44 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm.Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.
Applications:
• Sub Level Caving, benching• Sub Level Stoping• VCR and cable bolting
www.resemin.com
Muki LHP Technical specifications
SPECIFICATIONS
DRIFTER• Model• Percussion Power• Percussion pressure• Frequency Percussion• Rotation speed• Rotation Torque• Hole diameter• Lub air consumption• Lub oil consumption• Water consumption• Shank Adapter• Weight• Length with shank
Montabert HC5013 kW
130 Bar62 Hz
0 - 195 rpm415 Nm
33 - 64 mm83.3 l/s (to 2.5 bar)
0.8 cc/min25 l/min (to 8 bar)
R32 Female102 kg
855 mm
FEED• Model• Advance drilling• Feed extension• Hydraulic clamp• Standard Feed• Options• Two Stinger to stabilize while