MS Autotec 2008013404 Lee Gun-Min Intro – make be safe and green Secret 1 – Local heat treatment Secret 2 – Hot stamping Secret 3 – Hydrofoming Final Secret – TWB Summary Inde x
Feb 01, 2016
MS Autotec2008013404 Lee Gun-Min
Intro – make be safe and green
Secret 1 – Local heat treatment
Secret 2 – Hot stamping
Secret 3 – Hydrofoming
Final Secret – TWB
Summary
Index
Intro - make be safety and green How Satisfy it?
hardness car is safe. Is it true ?
Eco-friendly Not all recycle and prevent pollution. We must have to reduce use material and energy
Yes, but think about when you hitted by hardness hammer.Car’s Safety was be consider both driver and walker
In summary, car bumper needs control of impact and
car frame need toughness
Local heat treatment
High tensile strength
Low tensile strength
One material have two type strength. → unnecessary adding material → Lightweight
Hot stamping
Heating
First heating Second heating result part (High-frequency heating)
550 ~ 750 ºC 930 ºC ↑
마텐자이트
~ 400 ºC 750 ºC ↓
페라이트 +펄라이트
High-temperature heating
Low-temperature heating
Hot stamping & QuenchingStamping and Quenching At the same time.It reduce making line → need small place, low priceIn adition upgrade quality
Help you
1
1
2
2
*Question : why did they help?
Hydro-forming
http://www.hysco.com/html/rd/ulsan/geabal_1_01.aspx
TWB (Tailored Welded Blank)Individual steel sheets of different thickness, strength and coating are joined together by laser welding.Reduce weight, Structural and crash performance is improved
Summary Low wehigt car is very dengerous?
Eco-friendly?