This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Maipu Confidential & Proprietary Information Page 1 of 57
MP1800-3 Router Installation Manual
Maipu Communication Technology Co., Ltd No. 16, Jiuxing Avenue Hi-Tech Park Chengdu, Sichuan Province P. R. China 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948, 85148139 URL: http:// www.maipu.com Mail: [email protected]
Maipu Confidential & Proprietary Information Page 2 of 57
All rights reserved. Printed in the People’s Republic of China. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written consent of Maipu Communication Technology Co., Ltd. Maipu makes no representations or warranties with respect to this document contents and specifically disclaims any implied warranties of merchantability or fitness for any specific purpose. Further, Maipu reserves the right to revise this document and to make changes from time to time in its content without being obligated to notify any person of such revisions or changes. Maipu values and appreciates comments you may have concerning our products or this document. address comments to: Maipu Communication Technology Co., Ltd No. 16, Jiuxing Avenue, Hi-Tech Park Chengdu, Sichuan Province P. R. China 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948, 85148139 URL: http:// www.maipu.com Mail: [email protected] All other products or services mentioned herein may be registered trademarks, trademarks, or service marks of their respective manufacturers, companies, or organizations.
Document History
Date Revision No. Description
19/11/2007 R1.0 The MP1800-3 Router Installation Manual provides technical information about installation issues of the router designed and developed by Maipu Communication Technology Co., Ltd
Maipu Confidential & Proprietary Information Page 3 of 57
Maipu Feedback Form Your opinion helps us improve the quality of our product documentation and offer better services. Fax your comments and suggestions to (86) 28-85148948, 85148139 or email to [email protected].
Document Title MP1800-3 ROUTER INSTALLATION MANUAL
check suggestions to improve this document: Improve introduction Make more concise Improve Contents Add more step-by-step procedures/tutorials Improve arrangement Add more technical information Include images Make it less technical Add more detail Improve index
If you wish to be contacted, complete the following:
Name Company
Postcode Address
Telephone E-mail
Maipu Confidential & Proprietary Information Page 4 of 57
Contents
About Installation Manual .........................................................................6 Purpose .................................................................................................................6 How to Get in Touch ...............................................................................................6
1-port ISDN U Module (1U)....................................................................................................28 IP Module (VOP/VOS) Series..................................................................................30
1-port IP Phone Module (1VOP) .............................................................................................30 2-port IP Phone Module (2VOP) .............................................................................................31 1-port Switch IP Phone Module (1VOS) ..................................................................................32 1 1VOS Module & Indicator....................................................................................................32 2-port Switch IP Phone Module (2VOS) ..................................................................................34
Asynchronous Serial Port Module (A) Series ............................................................35
Maipu Confidential & Proprietary Information Page 5 of 57
8-port Asynchronous Serial port Module (8AX)........................................................................35
System Installation................................................................................. 37 Precautions ..........................................................................................................37
Ethernet Cable .....................................................................................................54 Console Port Cable................................................................................................56 RM2-1E1 & RM2-1CE1 Using RJ45-RJ45 Crossing Twisted-pair .................................57
MP1800-3 Router Installation Manual Version 1.3
Maipu Confidential & Proprietary Information Page 6 of 57
About Installation Manual
Purpose The MP1800-3 Router Installation Manual explains installation and other technical topics. The manual aims to help technicians and network managers install the product and get going with it quickly.
How to Get in Touch The following sections provide information on how to obtain support for the Maipu English documentation and Maipu products.
Customer Support If you have problems or questions regarding your product, contact us by e-mail at [email protected]. You can also call our Overseas Business Division over +86–28-85148850, 85148041, 85148050, 85148750, and 85148997.
Documentation Support Maipu Communication Technology Co., Ltd welcomes comments and suggestions on the document usefulness. For further queries or suggestions, contact us by e-mail [email protected] or fax comments to +86-28-85148948 or 85148139. You can visit our website at http://www.maipu.com, which comprises interesting subjects such as product knowledge base, sales & support, and the Maipu news.
Page 7 of 57
Overview
MP1800-3-8FE router integrates routing, switching, security, VoIP and
transmission functions improving businesses in terms of Multi-service
Edge-Intelligent Network (MeIN). It adopts fixed and modular structure,
and provides broadband-narrowband, multi-service and intelligent
solutions.
The router extends 64-byte 100Kpps packet-forwarding capability and
100M line rate switching capability from LAN-to-WAN. It can be used to
access multi-Ethernet nodes such as network ends, PC and video monitor
in finance, stocks, insurance and public sector industries.
MP1800-3-8FE router provides software features such as VoIP, VPN, MPLS,
multicast, MAC address binding, and access control and bandwidth
restriction. It provides backup schemes and QoS features. It can be widely
applied to multiple services such as data, video and voice.
MP1800-3-8FE router, combined with other Maipu routers, provides
complete WAN network solutions for operator, finance, public sector,
energy, transport, education and defense, and large and medium-scale
organizations.
Page 8 of 57
Key Features The router integrates routing, switching, security, voice, transmission, local
storage and wireless to realize intelligent network. The inbuilt intelligent switch,
firewall, VPN (including MPLS VPN, IPsec VPN and L2TP VPN), VoIP and
transmission service modules provide a powerful intelligent platform for
different service applications. The router extends Multi-service Edge-Intelligent
Network (MeIN) to improve business efficiency.
The router is cost-effective and supports expansion of WAN line bandwidth to
100M. MP1800-3-8FE router adopts the fast-forwarding engine technology. The
LAN-to-WAN 64-byte forwarding performance reaches 100Kpps (for more than
256 bytes, the line rate reaches 100M); the switching performance from LAN-
to-WAN reaches 100M line rate. It supports expanding the WAN line bandwidth
to 100M.
The router has high expansibility. It facilitates expansion of WAN interfaces
and VoIP to realize narrowband access. MP1800-3-8FE router integrates the
features of previous narrowband routers and provides two high-speed MIMs
and one VoIP slot to realize the expansion of private leased line, dialing backup
and VoIP.
The router provides multi-Ethernet access for expansion of broadband. It
realizes the high-bandwidth access of multi-Ethernet nodes such as network
ends, PC and video monitor so that users do not need to purchase Ethernet
switches. The network investments are saved, faults reduced, and 100M optic
fiber broadband access of carrier MSTP realized.
Ethernet interfaces adopt L3 technology for intelligent service control. WAN line
backup ensures that the services are not interrupted. MP1800-3-8FE router
realizes the WAN line backup of narrowband-to-narrowband, broadband-to-
broadband, narrowband-to-broadband as well as wire-to-wire in the future. It
is not required that the upper active/standby aggregation devices are one
device, which meets the redundant backup requirement of upper aggregation
devices and solves the problem that the switches with high-bandwidth
expanding capability cannot realize WAN backup.
Page 9 of 57
The router realizes load balance of multiple WAN lines. The access
nodes/network devices provide two or more routes to reach the same server at
the upper layer. The lower-level MP1800-3-8FE router can distribute traffic
among multiple routes for load balancing. When some route fails, the traffic
can be re-distributed on the remaining routes.
The router provides intelligent NMS for automatically diagnosing router faults
to realize zero-spot service. Inbuilt dial-up modem/console port is connected to
an external dial-up modem for remote login. Switch to remote configuration
mode via button. Then users and manufacturers can maintain devices
anywhere via telephone line dial-up to realize “zero-spot service”. MP1800-3-
8FE router supports Maipu intelligent NMS for diagnosing and fixing router
faults, automatically generating a record for users to query. It reduces
management and maintenance work of users.
The router has a variety software functions and supports MPLS protocols. It
supports L2TP and IPsec. The router adopts technologies to deploy different
VPN networks from L2 to L3. The router is inbuilt with firewall and provides
advanced security features such as ACL packet-filtering, NAT, authentication
audit, route verification, callback, and refusing service protection. It provides
integrated services and distinguished services, and supports ACR, FIFO, PQ,
CQ, FQ, CBWFQ, and LLQ to ensure differentiation of key services. It supports
the centralized network management modes of SHELL and SNMP (SNMP V3).
The router adopts English graphical Maipu Masterplan to realize cross-platform
and modular network management.
MP1800-3-8FE router is compatible with routers of other manufacturers. It
provides easy-to-use configuration interfaces and styles. The router complies
with RFC standards and recognized industry standards. The routers can be
inter-connected and communicate with network devices of other manufacturers.
MP1800-3-8FE has stable structure. It adopts 19” standard chassis (1U high),
which can be installed on standard rack. The router withstands earthquake,
high temperatures, and electromagnetic radiation. It is easy to install or
uninstall.
Page 10 of 57
Hardware Appearance
MP1800 series router appearance
Page 11 of 57
Indicators:
SYS & PWR & FAN (system, power supply and fan indicators):
SYS - System status indicator
Shining: Program loading
Shining slowly: Loading successfully
PWR - System power supply indicator
On - After power on
FAN – Fan indicator
On: Normal working
Off: Malfunction
SLOT2 (Slot 2 status indicator)
ACT: Data receiving/sending indicator
RDY: On - on line
SLOT1 (Slot 1 status indicator)
ACT: Data receiving/sending indicator
RDY: On: on line
SLOT 0 (Slot 0 status indicator)
ACT: Data receiving/sending indicator
RDY - on: on line
CONSOLE (console port)
TXD - console port data sending indicator
RXD - console port data receiving indicator
Page 12 of 57
FETH1 (WAN Ethernet 1)
100M - 10/100M Ethernet interface data rate indicator
On: 100M
Off: 10M
ACT - Ethernet interface data receiving/sending indicator
FETH0 (WAN Ethernet 0)
100M - 10/100M Ethernet interface data rate indicator
On: 100M
Off: 10M
ACT - Ethernet interface data receiving/sending indicator
Page 13 of 57
MP1800-3 Router Back Panel Interface
MP1800-3 router back panel interface configuration
MP1800-3 router back panel interface:
Interface Interface form Description Slot
ON/OFF Power supply switch - right OFF & left ON
INPUT AC 100-240V 1A input DC -40~-57V, 27W
SLOT2 (special) Bus slot VOP/VOS VoIP module
SLOT1 Decided by interface module
Bus slot MIM module
SLOT0 Decided by interface module
Bus slot MIM module
SLOT2 is VoIP module slot. It has inset VOP/VOS series VoIP card module.
SLOT1 and SLOT0 are MIM slots with modular design.
MP1800-3 Router Front Panel Interface
Page 14 of 57
MP1800-3 Router System
Item Description
Console port One (RJ45). Async DTE working mode
Ethernet interface Two 10/100M fast Ethernet interfaces (RJ45)
MIM slot Two MIM slots
Special slot One VOP/VOS slot
Processor High-speed RISC processor
FLASH 32Mbyte (MP1800)
SDRAM 128Mbyte (MP1800)
Dimension (W×D×H)
444mm × 318mm × 44.5mm
Weight 4.5 Kg
Power supply input voltage
DC, -40~-57V
Environment temperature
0~40℃
Environment humidity 10~90%. Non-condensing
Maximum power 27W±10% (MP1800)
Page 15 of 57
Product Functions Protocol & Service Description
Network protocol WAN supports: PPP PPP compression SLIP CSLIP protocol Frame relay Frame relay switching X.25 X.25 switching HDLC LAPB ISDN LAN is Ethernet supporting two kinds of link layer frame: Ethernet-II Ethernet-SNAP
Routing protocol Static routing Dynamic routing: RIPv1 RIPv2 OSPF BGP IRMP (compatible with CISCO EIGRP) SNSP (compatible with CISCO ODR) Dial-on-demand (DDR) Policy routing Multicast: IGMP PIM-SM PIM-DM DVMRP Hot backup: VRRP VBRP (compatible with CISCO HSRP)
Network service ARP Proxy ARP L2TP Configuration command level protection IP packet filter firewall IP UNNUMBERED IP policy routing
Page 16 of 57
DHCP relay PAP/CHAP check EASY IP NAT network conceal RADIUS check IPsec data encryption IKE GRE Load balance MPLS
QoS service PQ CQ WFQ CBWFQ LLQ WRED CAR
Network management SNMPv1, SNMPv2, SNMPv3 Supporting standard network management (compatible with CISCO) Local configuration via console port Local or remote login via local Telnet Configuration command security isolation function Chinese/English prompt and help information Detailed debugging information, for network malfunction elimination Login and manage other products by Telnet Download and upload configuration file and application program via FTP Download and upload configuration file and application program via TFTP Colorful debugging information support Support log function
Security IP packet filter firewall, PAP/CHAP, MD5, NAT, RADIUS, TACACS, IPsec data encryption
MP1800-3 Router Installation Manual
Page 17 of 57
Modules
MP1800-3 router is a modular router with three slots. The current
interface module provides:
1SAE
1CE1
1E1
1M336
1M128
1U
1VOP
2VOP
1VOS
2VOS
1ETE
1STA
MP1800-3 Router Installation Manual
Page 18 of 57
Sync/Async Serial Interface Module (SAE) Series 1-port High-speed V.24/V.35 Serial Module (1SAE) 1SAE module is used for MP1800-3 router. Its main function is to complete
data flow receiving and sending.
For sync port, 2.048Mbps in DCE mode and 8 Mbps in DTE mode. For
async port 115.2Kbps. The working mode by default is in sync mode. In
DTE mode, it uses clock from external DCE equipment such as external
sync modem. But in DCE mode, router provides clock.
1SAE Interface Module
1SAE interface module:
1-port high speed V.24/V.35 serial module (1SAE)
1SAE Module Connected Cable
1SAE module connected cable is V35 DTE and V24 DTE.
1SAE Interface Attr ibutes
1SAE module interface attributes is as table 2-1: Table 2-1 1-port high
speed V.24/V.35 serial module (1SAE) interface attributes
Description Attributes
Sync Async
Tie-in DB25-DB25 DB25-DB25
Interface standard & working V.24 V.35 EIA/TIA-232
MP1800-3 Router Installation Manual
Page 19 of 57
mode DTE DCE
DTE DCE
Minimum BR (bps) 1200 1200 300
Maximum BR (bps) 128K 8M 115.2K
Dialup Backup
Protocol & Service X25 HDLC PPP SLIP FR LAPB
HDLC PPP SLIP
MP1800-3 Router Installation Manual
Page 20 of 57
Channelized E1 Module (CE1) Series 1-port Channelized E1 Module (1CE1) The 1-port channelized E1 module provides multi-timeslot data flow port
with total bus transmission rate 1984K. When used as CE1 interface, it can
be divided into 1-31 timeslots, and each group works an interface after
binding.
1CE1 Interface Module & Indicator
1CE1 interface module:
1-port channelized E1 module (1CE1)
1-port channelized E1 module (1CE1) indicator:
LOS Lost indicator On: Cannot check sync signal Off: After sync
1CE1 Module Connected Cable
1CE1: BNC pin coaxial line and RJ45-RJ45 connected twisted-pair.
MP1800-3 Router Installation Manual
Page 21 of 57
1CE1 Module Interface Attr ibutes
Attributes Description
Interface BNC, RJ45 (can not be used at the same time)
Interface No. One group for each
Interface standard
G.703
Protocol PPP X.25 HDLC FR
Non-channelized E1 Module (E1) Series 1-port Non-channelized E1 Module (1E1) The 1-port non-channelized E1 module provides 2.048Mbit/s data
transmission port. E1 is same as CE1 interface, which can be divided into
32 timeslots physically.
The timeslot 0 of E1 can be used for data transmission in unframed mode
for 2M transparent transmissions.
MP1800-3 Router Installation Manual
Page 22 of 57
1E1 Module & Indicator
1E1 module:
1-port non-channelized E1 module (1E1)
1-port non-channelized E1 module (1E1) indicator:
LOS On: Transparent 2M transmission On: Non-transparent and cannot check frame sync signal Off: After sync
1E1 Interface Connected Cable
1E1 and BNC pin coaxial cable and RJ45-RJ45 connected twisted-pair.
1E1 Interface Attr ibutes
1-port non-channelized E1 (1E1) attributes:
Attributes Description
Interface BNC, RJ45 (cannot be used together)
Interface number 1 group
Interface standard G.703
Supported service
X.25 FR
Supported protocol
PPP HDLC
MP1800-3 Router Installation Manual
Page 23 of 57
Frequency-band MODEM M336 Series 1-port 33.6K Frequency-band MODEM (1M336) The 1-port 33.6K frequency-band MODEM works in sync or async mode.
1M336 Interface & Dialup DIP
1M336 interface module:
1-port 33.6K frequency-band MODEM (1M336)
1-port 33.6K frequency-band MODEM (1M336) DIP:
DIP switch configuration
Mode
1 2
Description
Frequency-band MODEM mode
OFF OFF LINE port is used as inbuilt frequency-band MODEM interface
Console port mode ON OFF LINE port is used as CONSOLE port Configure router via dialup remote login
MP1800-3 Router Installation Manual
Page 24 of 57
1M336 Interface Module Connected Cable
1M336 module connected cable is RJ45 (4, 5 signal wire) or RJ11
Asynchronous Serial Port Module (A) Series 8-port Asynchronous Serial port Module (8AX) 8-port asynchronous serial port module is to receive and send the data
flow of 8-port synchronous interface. It can only run in the asynchronous
mode and the maximum rate reaches 115.2K.
8AX Interface Module
8AX interface module:
8AX Interface Module Connected Cable
The cables of 8AX module adopt 8-port asynchronous serial port cable.
8AX Module Interface Attr ibutes
8AX module interface attributes is as follows:
Attributes Description
Tie-in DB60
Interface standard RS-232
Minimum Baud rate (bps) 300
Maximum Baud rate (bps) 115.2K
Supported services
Connect to terminals (with the function of fixing terminal numbers) Connect to ATM Connect to PC working stations Connect to routers Connect to frequency-base or baseband modems Access PC or router dialing Other serial devices
Supported protocol X.25 HDLC
MP1800-3 Router Installation Manual
Page 36 of 57
PPP SLIP
MP1800-3 Router Installation Manual
Page 37 of 57
System Installation
Precautions
Read this manual
Place MP1800-3 on flat surface
Do not put heavy material on MP1800-3
Note that cable doesn’t support hot-swap
Use UPS
Ensure proper grounding
Environment Requirements
Operat ion Environment
To guarantee stable use of router, maintain stable temperature and
humidity in the equipment room. MP1800-3 router must be used indoor.
The requirements for the indoor environment are as follows:
Environment temperature: 0~40°C
Humidity: 10~90%, non-condensing
MP1800-3 router is configured with the cooling fan. The cooling theory is:
With the effect of the fan, the cold air enters the device from the right of
the chassis and drawn out from the left. In this way, the forced convection
is formed and the heat generated during device running is drawn out.
MP1800-3 Router Installation Manual
Page 38 of 57
Around the device, there must be 10cm space to ensure enough cooling
space. It is recommended to install MP1800-3 router on the 19” standard
cabinet. If there is no cabinet, the device also can be placed on the clean
plane horizontally. In the areas with hot summer, it is recommended to
install the air-conditioner.
Temperature & Humidi ty
To ensure the service quality and life of MP1800-3 router, it is
recommended to maintain a certain temperature and humidity in the
computer lab. If the humidity in the computer lab is high for long time, it
causes the poor insulation and even electricity leak of insulation materials
easily.
Sometimes, the mechanical performances of materials change and the
metal parts are corroded easily, too. If the relative humidity is too low,
insulation pads shrink, which causes the fastened screws loose. Meanwhile,
in dry environment, static electricity appears easily, which harms the
circuits on the router.
If the temperature is too high, the reliability of the router reduces greatly.
The long-time high temperature affects the life and speeds up the aging of
insulation materials.
The recommended temperature and humidity in equipment room: Temperature Relevant humidity Long-term Short-term Long-term Short-term
15℃-30℃ 0℃-40℃ 40%-65% 10%-90%
Measuring points of the working temperature and humidity of MP1800-3
router in the equipment room mean the values measured from the floor
above 1.5 m and 0.4 m from the front of the rack when there are no
protection boards.
The short-term working condition means less than 48h continuously and
less than 15 days for the annual total.
Extreme adverse working environment means the environment
temperature and humidity when the air-conditioning system in the
computer room fails. Each time the normal work should be recovered
within less than 5h
MP1800-3 Router Installation Manual
Page 39 of 57
Dust- f ree Environment
Dust is harmful for MP1800-3 router operation. Dust causes static
absorption, which makes the poor contact of metal pieces. Static
absorption appears especially when the temperature and humidity are
lower, which affects the device life and causes communication fault.
Anti-stat ic
MP1800-3 router takes lots of measures in anti-static, but when the static
exceeds a certain volume, the circuits even the whole monitor are
damaged.
For router communication, static electricity originates from external
electric field of high-pressure like electricity cables and thunders, and
internal system such as floor material and chassis structure. To prevent
the damage caused by the static, do as follows:
• Ensure proper equipment grounding
• Maintain dustproof room
• Keep suitable temperature & humidity
• Wear anti-static equipment
• Place the disassembled circuit board on the anti static workstation
and keep the face upturned or in the anti static bag
When viewing or removing the disassembled circuit board, touch the edge
of circuit board and avoid touching the components on the circuit board.
Anti- interference
The various interference sources no matter from the exterior of devices or
application systems or from the interior affect the devices through