Model Sensor-Activated Single Flush Side Mount Exposed, Diaphragm Type, ... sensor activation eliminates the need for user contact except to initiate ... Single Flush Side Mount. Exposed,

DescriptionExposed, battery-powered, sensor-activated, water closet flushometer with a single flush side mount unit for top spud floor mounted or wall hung bowls.

Flush CycleRoyal 111-1.6 SFSM Low Consumption (1.6 gpf/6.0 Lpf) Code No: 3910275

SpecificationsQuiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with the following features:• PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass• ADA Compliant Optima Plus® Battery Powered Infrared Sensor for automatic “No

Hands” operation• Chrome Plated Infrared Sensor Housing• Can be Mounted on either the Left or Right Side of Valve• True Manual Override Flush Button• Four (4) Size C Alkaline Batteries included: Duracell® with DURALOCK Power

Preserve Technology™-guaranteed for up to 10 years in storage• “Low Battery” Flashing LED • “User in View” Flashing LED• 72-Hour Sentinel Flush• Infrared Sensor Range Adjustment Screw and Reset Button• 1” I.P.S. Screwdriver Bak-Chek® Angle Stop with free spinning, vandal resistant

Stop Cap• Adjustable Tailpiece• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom

Hex Coupling Nut• Spud Coupling and Flange for 1-1/2” Top Spud• Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw• High Copper, Low Zinc Brass Castings for Dezincification Resistance• Flush Accuracy Controlled by CID Technology• No External Volume Adjustment to Ensure Water Conservation• Diaphragm, Stop Seat and Vacuum Breaker Molded from PERMEX® Rubber

Compound for Chloramine resistance

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance with the applicable sections of ASSE 1037, ASME 112.18, ASME 112.19, ANSI 117.1. Installation conforms to ADA requirements.

AccessoriesSee Accessories Section and Optima Plus Accessories Section of the Sloan catalog for details on these and other Optima Plus Flushometer variations.

FixturesConsult Sloan for Sloan brand matching fixture options.

Smart Sense Technology™Sloan® SFSM flushometers are equipped with Smart Sense Technology™, which applies extended range and logic techniques to provide superior sensor-activated performance.

Automatic OperationSloan’s SFSM flushometers are activated via multi-lobular infrared sensor. The sensor sets the flushing mechanism when the user is detected and completes the flush when the user steps away.

Manual OperationSloan’s SFSM flushometers can also be activated manually by pushing the black TMO button.

Service ModeFeatures service mode which ignores targets for 10 minutes to enable fixture to be cleaned or serviced.

HygienicTouchless, sensor activation eliminates the need for user contact except to initiate the True Mechanical Override button when required, to help control the spread of infectious diseases. The 72-Hour Sentinel Flush keeps fixture fresh during periods of non-use.

Warranty3 year (limited)

Single Flush Side Mount

Royal®

Model Sensor-Activated Single Flush Side Mount

The information contained in this document is subject to change without notice.

This space for Architect/Engineer approval

Job Name Date

Model Specified Quantity

Variations Specified

Customer/Wholesaler

Contractor

Architect

Royal 111-1.6 SFSM 11-13

ROUGH-IN

DescriptionExposed, battery-powered, sensor-activated, water closet flushometer with a single flush side mount unit for top spud floor mounted or wall hung bowls.

Flush CycleRoyal 111-1.6 SFSM Low Consumption (1.6 gpf/6.0 Lpf) Code No: 3910275

Control CircuitSolid State6 VDC Input2-3 Second Arming Delay72 Hour Sentinel Flush

SFSM Sensor TypeInfrared Convergence Type Object Lock Detection

SFSM Sensor RangeFactory Set at22” - 42” (559 mm-1067 mm)

SFSM Battery Type(4) Size C Alkaline: Duracell® with DURALOCK Power Preserve Technology™

Battery Life3 Years @ 3,000 Flushes/Month

Indicator LightsUser in View/Low Battery

Valve Operating Pressure (Flowing)25-80 psi (172-552 kPa)

SFSM DIMENSIONS

OPERATION1. A continuous, invisible

light beam is emitted from the object lock infrared sensor.

2. As the user enters the beam’s effective range, 25” - 40” (635 mm-1016 mm), the object lock infrared sensor senses the user.

3. When the user steps away from the object lock Infrared sensor, the circuit initiates the flushing cycle to flush the fixture. The circuit then automatically resets and is ready for the next user.

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com

© 2013 Sloan Valve Company Royal 111-1.6 SFSM 11-13

7”(178 mm)

6”(131 mm)

2 3/4” (70 mm)

5”(131 mm)

6”(150 mm)

SENSOR WINDOW

Includes EBV-500-A Side Mount Unit

DescriptionExposed, battery-powered, sensor-activated, water closet flushometer with a single flush side mount unit for top spud floor mounted or wall hung bowls.

Flush CycleRoyal 111-1.28 SFSM High-Efficiency (1.28 gpf/4.8 Lpf)

Code No: 3910276

SpecificationsQuiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with the following features:• PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass• ADA Compliant Optima Plus® Battery Powered Infrared Sensor for automatic “No

Hands” operation• Chrome Plated Infrared Sensor Housing• Can be Mounted on either the Left or Right Side of Valve• True Mechanical Override Flush Button• Four (4) Size C Alkaline Batteries included: Duracell® with DURALOCK Power

Preserve Technology™-guaranteed for up to 10 years in storage• “Low Battery” Flashing LED • “User in View” Flashing LED• 72-Hour Sentinel Flush• Infrared Sensor Range Adjustment Screw and Reset Button• 1” I.P.S. Screwdriver Bak-Chek® Angle Stop with free spinning, vandal resistant

Stop Cap• Adjustable Tailpiece• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom

Hex Coupling Nut• Spud Coupling and Flange for 1-1/2” Top Spud• Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw• High Copper, Low Zinc Brass Castings for Dezincification Resistance• Flush Accuracy Controlled by CID Technology• No External Volume Adjustment to Ensure Water Conservation• Diaphragm, Stop Seat and Vacuum Breaker Molded from PERMEX® Rubber

Compound for Chloramine resistance

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance with the applicable sections of ASSE 1037, ASME 112.18, ASME 112.19, ANSI 117.1. Installation conforms to ADA requirements.

AccessoriesSee Accessories Section and Optima Plus Accessories Section of the Sloan catalog for details on these and other Optima Plus Flushometer variations.

FixturesConsult Sloan for Sloan brand matching fixture options.

Smart Sense Technology™Sloan® SFSM flushometers are equipped with Smart Sense Technology™, which applies extended range and logic techniques to provide superior sensor-activated performance.

Automatic OperationSloan’s SFSM flushometers are activated via multi-lobular infrared sensor. The sensor sets the flushing mechanism when the user is detected and completes the flush when the user steps away.

Manual OperationSloan’s SFSM flushometers can also be activated manually by pushing the black TMO button.

Service ModeFeatures service mode which ignores targets for 10 minutes to enable fixture to be cleaned or serviced.

HygienicTouchless, sensor activation eliminates the need for user contact except to initiate the True Mechanical Override button when required, to help control the spread of infectious diseases. The 72-Hour Sentinel Flush keeps fixture fresh during periods of non-use.

Warranty3 year (limited)

Single Flush Side Mount

Royal®

Model Sensor-Activated Single Flush Side Mount

The information contained in this document is subject to change without notice.

This space for Architect/Engineer approval

Job Name Date

Model Specified Quantity

Variations Specified

Customer/Wholesaler

Contractor

Architect

Royal 111-1.28 SFSM 11-13

ROUGH-IN

DescriptionExposed, battery-powered, sensor-activated, water closet flushometer with a single flush side mount unit for top spud floor mounted or wall hung bowls.

Flush CycleRoyal 111-1.28 SFSM High-Efficiency (1.28 gpf/4.8 Lpf)

Code No: 3910276

ELECTRICAL SPECIFICATIONSControl CircuitSolid State6 VDC Input2-3 Second Arming Delay72 Hour Sentinel Flush

SFSM Sensor TypeInfrared Convergence Type Object Lock Detection

SFSM Sensor RangeFactory Set at22” - 42” (559 mm-1067 mm)

SFSM Battery Type(4) Size C Alkaline: Duracell® with DURALOCK Power Preserve Technology™

Battery Life3 Years @ 3,000 Flushes/Month

Indicator LightsUser in View/Low Battery

Valve Operating Pressure (Flowing)25-80 psi (172-552 kPa)

SFSM DIMENSIONS

OPERATION1. A continuous, invisible

light beam is emitted from the object lock infrared sensor.

2. As the user enters the beam’s effective range, 22” - 42” (559 mm-1067 mm), the object lock infrared sensor senses the user.

3. When the user steps away from the object lock Infrared sensor, the circuit initiates the flushing cycle to flush the fixture. The circuit then automatically resets and is ready for the next user.

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com

© 2013 Sloan Valve Company Royal 111-1.28 SFSM 11-13

7”(178 mm)

6”(131 mm)

2 3/4” (70 mm)

5”(131 mm)

6”(150 mm)

SENSOR WINDOW

Includes EBV-500-A Single-Flush

Side Mount Unit

DescriptionExposed, battery-powered, sensor-activated, urinal flushometer with a single flush side mount unit for 3/4” top spud urinals.

Flush Cycle£Royal 186-0.125 SFSM High Efficiency (0.125 gpf/0.5 Lpf)

Code No: 3912748£Royal 186-0.25 SFSM High Efficiency (0.25 gpf/1.0 Lpf)

Code No: 3912747£Royal 186-0.5 SFSM High Efficiency (0.5 gpf/1.9 Lpf)

Code No: 3912746

SpecificationsQuiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer with the following features:• PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass• ADA Compliant Optima Plus® Battery Powered Infrared Sensor for automatic “No

Hands” operation• Chrome Plated Infrared Sensor Housing• Can be Mounted on either the Left or Right Side of Valve• True Mechanical Override Flush Button• Four (4) Size C Alkaline Batteries included: Duracell® with DURALOCK Power

Preserve Technology™-guaranteed for up to 10 years in storage• “Low Battery” Flashing LED • “User in View” Flashing LED• 72-Hour Sentinel Flush• ¾” I.P.S. Screwdriver Bak-Chek® Angle Stop with free spinning, vandal resistant

Stop Cap• Adjustable Tailpiece• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom

Hex Coupling Nut• Spud Coupling and Flange for 3/4” Top Spud• Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set Screw• High Copper, Low Zinc Brass Castings for Dezincification Resistance• Flush Accuracy Controlled by CID Technology• No External Volume Adjustment to Ensure Water Conservation• Diaphragm, Stop Seat and Vacuum Breaker Molded from PERMEX Rubber

Compound for Chloramine resistance

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance with the applicable sections of ASSE 1037, ASME 112.18, ASME 112.19, ANSI 117.1. Installation conforms to ADA requirements.

AccessoriesSee Accessories Section and Optima Plus Accessories Section of the Sloan catalog for details on these and other Optima Plus Flushometer variations.

FixturesConsult Sloan for Sloan brand matching fixture options.

Smart Sense Technology™Sloan’s SFSM flushometers are equipped with Smart Sense Technology™, which applies extended range and logic techniques to significantly reduce water usage in high use urinal applications; such as when a continuous line of people (queue) forms. In fact, during a continuous queue, regardardless of the number of users, the maximum amount of water used is only 2.5 gallons, assuming a 0.5 gpf diaphragm kit. Please contact Sloan for specific details.

Automatic OperationSloan’s SFSM flushometers are activated via multi-lobular infrared sensor. The sensor sets the flushing mechanism when the user is detected and completes the flush when the user steps away.

Manual OperationSloan’s SFSM flushometers can also be activated manually by pushing the black TMO button.

Service ModeFeatures service mode which ignores targets for 10 minutes to enable fixture to be cleaned or serviced.

HygienicTouchless, sensor activation eliminates the need for user contact except to initiate the True Mechanical Override button when required, to help control the spread of infectious diseases. The 72-Hour Sentinel Flush keeps fixture fresh during periods of non-use.

Warranty

Single Flush Side Mount

Royal®

Model Sensor-ActivatedSingle Flush Side Mount

The information contained in this document is subject to change without notice.

This space for Architect/Engineer approval

Job Name Date

Model Specified Quantity

Variations Specified

Customer/Wholesaler

Contractor

Architect

Royal 186 HEU SFSM 02-14

ROUGH-IN

DescriptionExposed, battery-powered, sensor-activated, urinal flushometer with a single flush side mount unit for 3/4” top spud urinals.

Flush Cycle£Royal 186-0.125 SFSM High Efficiency (0.125 gpf/0.5 Lpf)

Code No: 3912748£Royal 186-0.25 SFSM High Efficiency (0.25 gpf/1.0 Lpf)

Code No: 3912747£Royal 186-0.5 SFSM High Efficiency (0.5 gpf/1.9 Lpf)

Code No: 3912746

ELECTRICAL SPECIFICATIONSControl CircuitSolid State6 VDC Input2-3 Second Arming Delay72 Hour Sentinel Flush

SFSM Sensor TypeInfrared Convergence Type Object Lock Detection

SFSM Sensor RangeFactory Set at22” - 42” (559 mm-1067 mm), If Converted to Urinal Range Setting15”- 30” (381 mm-762 mm)

SFSM Battery Type(4) Size C Alkaline: Duracell® with DURALOCK Power Preserve Technology™

Battery Life3 Years @ 3,000 Flushes/Month

Indicator LightsUser in View/Low Battery

Valve Operating Pressure (Flowing)25-80 psi (172-552 kPa)

SFSM DIMENSIONS

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com

© 2014 Sloan Valve Company Royal 186 HEU SFSM 02-14

5”(131 mm)

6”(150 mm)

SENSOR WINDOW

7”(178 mm)

6”(131 mm)

2 3/4” (70 mm)

¾” I.P.S. SUPPLY (DN 20 mm)

OPERATION1. A continuous, invisible

light beam is emitted from the object lock infrared sensor.

2. As the user enters the beam’s effective range, 22” - 42” (559 mm-1067 mm), the object lock infrared sensor senses the user.

3. When the user steps away from the object lock Infrared sensor, the circuit initiates the flushing cycle to flush the fixture. The circuit then automatically resets and is ready for the next user.

Includes EBV-500-A Single-Flush

Side Mount Unit