This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
JigJig
JigJig
OPTIONAL KITS:
JigJig
1/2"
11/16"
7/32"1-5/8"
1-3/8" 1/4"
1/4" dia. 7-1/16"
To locate disconnect lever holes, place the disconnect assemblies flush against each corner and mark the holes.
Predrill the front face frame hole in the cabinet.
Insert #8 x 5/8" pan head positioning screw.
Reinstall drawers with drawer fronts attached. To perform horizontal adjustment (grey cam), first turn the black cam one quarter turn counter clockwise to unlock. Vertical adjustment is actuated by the blue cam. Re-lock the cam after adjustments are made.
Remove drawer and install #8 x 5/8" pan head fixing screws.
Insert the drawer. Push until drawer "ratchets" in to the desired depth. The rear bracket will align the slides parallel to one another.
Frameless mounting
Notch drawer
Locate and drill 3/8" deep drawer hook holes
Insert a #8 x 5/8" flat head screw.
Install rear bracket onto slide.
Locate rear face frame bracket hole.
#8 X 5/8" L flat head screw forcabinet member
#8 X 5/8" L pan head screw for rear bracket
Horizontal Adjustment (grey)
Vertical Adjustment (blue)
View from bottom
NOTE: Install knobs or pulls after drawer fronts are adjusted to ensure proper alignment.
1
2
3
4
5
6
7
8
9
10
#6 X 5/8" L pan head screwfor levers
10º
JigJig
3/8"
1-3/16"
Predrill holes at a 10º angle.
.67"
1.76"
37mm
Drilling Jig PN 4180-0568-XE
Slotted Rear Face Frame Bracket PN 4180-0656-XE
Bottom Mount Bracket PN 4180-0569-XE
Inset Face Frame Bracket PN 4180-0604-XE
Bottom Inset Face Frame Bracket PN 4180-0605-XE
Vertical Mount Disconnect PN 4180-0747-XE
Tool Kit PN 4180-0603-XE
For more detailed installation information, see product technical sheet.
12311 Shoemaker Avenue • Santa Fe Springs, CA 90670(562) 903-0200
www.accuride.com
Q U I C K S T A R T G U I D EMODEL 3135EC EASY-CLOSE
D R AW E R P R E PA R AT I O N C A B I N E T M E M B E R R E A R FA C E F R A M E B R A C K E T D R AW E R I N S E R T I O N & A D J U S T M E N T
Install disconnect levers. Levers should curve toward the center of the drawer. Use #6 x 5/8" pan head screw.
FORMULA FOR CALCULATING DRAWER BOX LENGTH Slide length = Outside drawer box length (Example: If slide length = 16", the outside length of the drawer box = 16")
FORMULA FOR CALCULATING DRAWER BOX HEIGHT Maximum drawer height = cabinet height minus 13/16”
Drawer Box Length tolerance +0/-1/16"FORMULA FOR CALCULATING DRAWER BOX WIDTH For drawer side thickness: 5/8" 16mm 19/32" 15mm 9/16" 14mm 1/2" 13mm
For inside drawer width, deduct from inside cabinet width: 1-3/4" 44.45mm 1-3/4" 44.45mm 1-3/4" 44.45mm 1-3/4" 44.45mm
For outside drawer width, deduct from inside cabinet width: 1/2" 13mm 9/16" 15mm 5/8" 17mm 3/4" 19mm
Front to backadjustment cam
1/2" thick drawer spacer
Front to back adjustment cam
Rear
.63[16.0]
1.26[32.0]
3/32" [2.4] Dia. x 3/8"[9.5] deep hole (12x)
ATYP.
Inside Drawer Widthminus 1.00 [25.4]
.65[16.5]
.95[24.1]
Front
CL
Recommend 3/4"[19.0] min. thickness
CABINET CONSTRUCTIONBuild drawer system based on 1.20" [30.5 mm] slide clearance requirement. Additional drawer requirements are specified in the Eclipse slide technical sheet.
SlideLength
12.00 [304.8]
14.00 [355.6]
16.00 [406.4]
18.00 [457.2]
20.00 [508.0]
22.00 [558.8]
24.00 [609.6]
26.00 [660.4]
28.00 [711.2]
A 8.82 [224.0]
8.82 [224.0]
12.60 [320.0]
12.60 [320.0]
16.38 [416.0]
18.90 [480.0]
18.90 [480.0]
22.68 [576.0]
22.68 [576.0]
FIGURE 2Pre-drill holes on bottom panel of the cabinet as shown. All dimensions are typical.
Cabinet Front
Ordering/Packaging Information
Bottom mount brackets are ordered as a kit, or in bulk. Brackets are provided in zinc finish. Order one kit per pair of slides.
To order the kit, specify part number 4180-0569-XE. Each kit contains 4 bottom mount brackets, 8 each #8-32 x 1/4" self-tapping screws and one installation sheet.
RoHS CompliantSpecifications, materials, prices, terms and delivery are subject to change without notice.
APPLICATIONS: Bottom mount bracket kit for use with3135 Easy-Close. This product is covered by U.S. and various foreign patents issued and/or pending.
.332 DIA. [8.4] C’Sunk to .200 DIA. [5.1] x 82 (3x)
.95 [24.1]
.59 [14.9]
2.43 [61.8]1.26
[32.0]
2.07 [52.7]
.62 [15.8]
.074 [1.9] 2.07 [52.7] .47
[12.0]
.58 [14.7] TYP.
1.10 [28.0]
.81 x 2 [20.6]
.35 [9.0]
.136 DIA. [3.5] (8x)
2.07[52.7] Ref.
#8 x 5/8" L wood screws
1.20[30.5] Ref.
#8-32 x 1/4" L Machine screws
Figure 1 Figure 2
Figure 3 Figure 4
FIGURE 3Install brackets to floor of the cabinet using #8 x 5/8" L Wood Screws (not included).
FIGURE 4Install slides to mounting brackets using #8-32 x 1/4" L self-tapping screws provided in the kit.
Connect the drawer to the slides by lowering the drawer onto the slides and pushing the drawer until the handles lock onto front of the slides.
INCHES[mm]
ACCURIDE INTERNATIONAL INC.12311 Shoemaker Avenue Santa Fe Springs, CA 90670TEL (562) 903-0200FAX (562) 903-0208www.accuride.comManufacturing, Engineering, and SalesUnited States • Germany • Japan • Mexico • United Kingdom • China
Formula for calculating inside drawer lengthFor drawer slide thickness 5/8” 16.00 mm 19/32” 15.00 mm 9/16” 14.00 mm 1/2” 13.00 mmDeduct from inside cabinet width 1-3/4” 44.45 mm 1-3/4” 44.45 mm 1-3/4” 44.45 mm 1-3/4” 44.45 mm
Formula for calculating outside drawer widthFor drawer side thickness 5/8” 16.00 mm 19/32” 15.00 mm 9/16” 14.00 mm 1/2” 13.00 mm
Deduct from inside cabinet width 1/2” 13.00 mm 9/16” 15.00 mm 5/8” 17.00 mm 3/4” 19.00mm
Full Extension Undermount Easy-Close slide for commercial applications. Reliable, smooth movement for drawers up to 30".
The 3135EC Enhanced Eclipse slide offers reliable, smooth movement perfect for a variety of high-end residential and commercial applications.
With improved operation and incredibly easy installation and adjustment features, the 3135EC offers robust performance. Easy-Close Action
• New interior easy-close action reduces total envelope
• Reliable soft-close feature brings drawers to a gentle close
• Fluid dampeners resist slam without adding bounce-back
• Improved sensorial movement
Lower Spacer Clip• Reduces migration and side-to-side movement
• Additional lateral support
Multiple Drawer Adjustment Features• Easy to install and adjust
• Quick horizontal, vertical, and front-to-back adjustments
Lever Disconnect• Horizontal and vertical mount
• Front-to-back adjustment with spiral cam fortheperfectfit
The enhanced Eclipse 3135EC is engineered specifically for commercial grade applications that require an undermount slide with flawless movement and superior soft-close action. Easy to install and adjust, the Eclipse offers minimal drawer sagging, migration, and produces a consistent, reliable experience time after time.
Applications include retail fixtures, hospitals, medical facilities, institutional casework, and high-end residential.
12311 Shoemaker Avenue Santa Fe Springs, CA 90670 562.903.0200 • fax: 562.903.0208 www.accuride.com
Accuride printed materials are:Printed with soy-based inks. Printed on paper that contains 10% recycled
materials and conforms to the latest sustainable arboriculture guidelines.
The enhanced Eclipse 3135EC is engineered specifically for commercial grade applications that require an undermount slide with flawless movement and superior soft-close action. Easy to install and adjust, the Eclipse offers minimal drawer sagging, migration, and produces a consistent, reliable experience time after time.
Applications include retail fixtures, hospitals, medical facilities, institutional casework, and high-end residential.
12311 Shoemaker Avenue Santa Fe Springs, CA 90670 562.903.0200 • fax: 562.903.0208 www.accuride.com
Accuride printed materials are:Printed with soy-based inks. Printed on paper that contains 10% recycled
materials and conforms to the latest sustainable arboriculture guidelines.