Specifications MGV MGV Series Akribis systems V-43 / V-44 MGV AVM30-15 AVM40-20 AVM90-30 AVM60-25 MGV 38 MGV 41 MGV 84 MGV 52 N N N/SqRt (W) W W V ℃ A A N/A V/m/s mH Ohms ms 4.6 29.4 2.26 4.2 169.6 48 155 0.63 4.00 7.35 7.35 2.94 10.6 0.3 9.9 58.1 3.89 6.5 222.8 60 155 0.77 4.50 12.90 12.90 6.22 11 0.6 26.4 119.0 7.45 12.5 254.8 60 155 1.55 7.00 17.00 17.00 6.42 5.2 1.2 74.3 315.0 13.21 31.6 568.4 60 155 3.30 14.00 22.50 22.50 6.61 2.9 2.3 kg kg kg mm μm μm μm μm μm N Nm Nm Nm N Nm Nm Nm ±3μm/25mm ±3μm/25mm ±1.5μm ±3μm/25mm ±0.5μm/25mm 0.084 0.366 0.3 15 0.162 0.715 0.8 20 0.391 1.703 2.0 25 1.386 5.457 6.0 30 129.0 5.0 3.1 3.7 2.9 1.7 1.0 1.2 231.0 10.6 7.8 9.0 7.8 3.5 2.6 3.0 706.0 23.1 12.0 12.0 19.6 7.7 4.0 4.0 1710.0 176.0 51.2 51.2 58.9 58.7 17.1 17.1 * Stroke refers to hardstop-to-hardstop. The limit sensors are positioned 0.5mm from the hardstops. Varied specifications Miniature linear guidance rails Suitable for high speed and acceleration applications Direct Drive Zero cogging and backlash ironless linear motor actuator Stroke from 15mm to 30mm Electrical Parameters Continuous Force, Coil @100 ºC Peak Force Motor Constant Continuous Power Peak Power Max Bus Voltage Max Coil Temperature Continuous current Peak Current, I peak Force Constant Back EMF Constant, V emf Inductance Terminal Resistance @ 25ºC Electrical Time Constant Mechanical Parameters Moving Mass Total Mass Recommended maximum load Stroke * Performance Parameters Straightness Flatness Bidirectional Repeatability Linearity without mapping Linearity with mapping Bearing Parameters Maximum static load capacity Maximum static roll moment Maximum static pitch moment Maximum static yaw moment Recommended maximum load 1 Recommended roll moment Recommended pitch moment Recommended yaw moment 1: The recommended maximum load is based on the load in which the acceleration of the moving mass is at least 1G. ISO 230-2:1997 – Bidirectional Repeatability, Bidirectional Accuracy, Bidirectional positional deviation Note: The straightness, bidirectional repeatability and linearity are qualified according to ISO 230-2:1997. Note: Please contact us for customized stroke. Unit Driven by Voice Coil Stages & Systems