Metal Seated Ball Valves

7/25/2019 Metal Seated Ball Valves

1/14

YOUNG POONG

BALL

VALVES

YOUNG POONG PRECISION CORPORATION

Metal Seated Ball ValvesMetal Seated Ball Valves


2/142

Large Port Openings

Assure less pressure drop

and higer Cv.

Wide Materials Selection

A corrosion resistant stainless

steels, Nickel base and reactive

alloys.

Rugged Heavy-Duty Body

Limited lifetime casting guarantee.

ANSI or JIS flanges standards.

Any flanges standards availableupon requested.

Metal seated ball valves

Young Poong precision

corporation invented the

Metal seated ball valve for

the most severe and oil &

gas services where drop-

tight shutoff is an absolute

requirement.

Nearly 20 years later there

are many imitators but no

substitute for the quality

and reliability, versatility

and value you receive with

Metal seated ball valves.

High Strength Stem

Accepts most standard actuationequipment.

Manual Operation

All YPPC metal seated ball valves

are fitted with a hand wrench as

standard for manual operation.

Low Torque

Low, constant and predictable

torque even at severe service.

Tight Shutoff

Design for bubble-tight shutoffacross the pressure range.

High Flow Cavity

With minimal pressure loss

through the valve, thereby

reducing plant operating costs.


3/14

Various Hard-FacingAdvanced coatings available upon

request customers specification.

V-Port Hard-Faced Ball

Optional V-port hard-faced ball

provides equal percentage control for

throttling abrasive and corrosivemedia. V-port hard-faced balls may be

specified in sizes 1/2(15) through

12(300) in all of B6M Metal seated ball

valve.

Other Options

- Extended Bonnet / Stem

- Welded End

- Low Fugitive Emission Packing- Fire Safety

3

YPPC Metal seated ball

valves offer the process

industries widest range of

floating and Trunnion

mounted ball valves,

materials and configurations.

This provides customers

the flexibility to specify ball

valves to meet virtually

all their applications needs.

Mate Lapping Process

The YPPC proprietary automated and

hands mate-lapping process of the ball and

seats ensure 100% contact over entire

sealing surface.


4/144

Scraping Seats Standard

Ball is wiped clean each time while the valve

is operating from fully open to close.

High Temperature Application

YPPC Metal seated ball valves are guaranteed

for maximum service temperature of 400 (750),

depending on the service environment.

Wide Sealing Surfaces

Highly polished wide surfaces eliminate wear

and enhance seal integrity.

Sharp

edge

Stellite - by Deloro Inc.

Advanced Coating

The ball and seats are available to the following

hard coatings.

- ENP - Tungsten Carbide(WC)

- Nickel/Chromium - Chrome Carbide

- Nickel Based Alloy - Stellite

Available coating process are follows as

- High Velocity Oxy Fuel

- Self-Fluxing- Plasma Transfer Arc

- Fusing

We recommend that thermal spray hardened

coating is the best choice at wear and erosion

environment of severe services.

Features & Benefits


5/145

First Products Failed

Products Failed in

PTA Application

PTA Application

YPPC have many references with poly-silicone projects of 10-year Korean market.

Our advanced technologies of Metal Seated Ball Valves have a reputation for all customers.

We have developed and desidned specific features to ensure valve longevity in various poly-silicone application.

The integral seat design of YPPC Metal Seated Ball Valves eliminates the possibility of potential problems

in severe wear and erosion service.

Particles of Silicone in Service

Silicone powder has various sizes and shapes,

Sizes are even at small may be 0.01 mm of

diameter.

YPPC have many references with Purified Terephthalic Acid (PTA) & many other severe corrosive chemical plants

in the world wide.

Our advanced techniques of metallurgy have impeoved many customers' demands.

YPPC have developed a product line committed to solve the excessive maintenance problems that plague the

process industries.

Poly-Silicone Projects with YPPC

Solved a Problem of High Corrosive Application with YPPC


6/146

Outline Dimensions

B6M General Purpose Ball Valve

* Other class and sizes available

W

L

H

Size 1/2" (15) to 5" (125) Size 6" (150) to 8" (200) Size 6" (150) to 8" (200) Size 10" (250) to 12" (300)

Gear Operated (Option)

LL L

L

W

W

A

A

B

B

C

C

H1

H1

H

H

inch (mm)

1/2 (15) 4.25 (108) 5.5 (140) 2.8 (71) - 5.12 (130) - - - 2.3 (5) 2.5(5.5)

3/4 (20) 4.625(117) 6 (152) 2.88 (73) - 5.12 (130) - - - 2.5(5.5) 3.6 (8)

1 (25) 5 (127) 6.5 (165) 3.15 (80) - 6.3 (160) - - - 3.6 (8) 5.9 (13)

1-1/4(32) 5.5 (140) 7 (178) 3.23 (82) - 6.3 (160) - - - 5.4 (12) 7.7 (17)

1-1/2(40) 6.5 (165) 7.5 (190) 4.61(117) - 9.06 (230) - - - 6.8 (15) 9.5 (21)

2 (50) 7 (178) 8.5 (216) 4.8 (124) - 9.06 (230) - - - 10 (23) 15 (33)

2-1/2(65) 7.5 (190) 9.5 (241) 6.54(166) - 15.75 (400) - - - 16 (35) 25 (55)

3 (80) 8 (203) 11.125(283) 6.93(176) - 15.75 (400) - - - 20 (44) 30 (66)

4 (100) 9 (229) 12 (305) 8.11(206) - 18.11 (460) - - - 38 (84) 47 (104)

5 (125) 10 (256) 15 (381) 8.78(223) - 18.11 (460) - - - 50 (112) 60 (132)

6 (150) 15.5 (394) 15.875(403) 11.46(291) 16.62(422) 39.37(1000) 0.4 (10) 8.51(216) 8.27(210) 62 (137) 82 (181)

8 (200) 18 (457) 19.75 (502) 14.06(357) 20.36(517) 59.06(1500) 0.4 (10) 8.5 (216) 8.27(210) 131 (289) 150 (331)

10 (250) 21 (533) 22.375(568) - 22.64(575) - 0.59(15) 13.98(355) 12.21(310) 270 (595) 310 (684)

12 (300) 24 (610) 25.5 (648) - 25 (635) - 0.59(15) 13.98(355) 12.21(310) 470(1036) 540(1190)

Valve

SizeClass 150

or 10K

Class 300

or 20K

Class 150

or 10K

Class 300

or 20K

H H1 W A B C

Weight, lbs(kg)L

B6EM Extended Bonnetinch (mm)

* Larger than 4available

1/2 (15) 4.25 (108) 5.5 (140) 5.44(138) 5.12(130) 2.5(5.5) 2.8(6.2)

3/4 (20) 4.625(117) 6 (152) 5.59(142) 5.12(130) 2.8(6.2) 4.0(8.8)

1 (25) 5 (127) 6.5 (165) 6.11(155) 6.3 (160) 4.0(8.8) 6.5 (14)

1-1/2(40) 6.5 (165) 7.5 (190) 7.09(180) 9.06(230) 7.5 (17) 10 (22)

2 (50) 7 (178) 8.5 (216) 7.37(187) 9.06(230) 11 (24) 17 (37)

2-1/2(65) 7.5 (190) 9.5 (241) 9.06(230) 15.75(400) 18 (40) 28 (62)

3 (80) 8 (203) 11.125(283) 9.49(241) 15.75(400) 22 (48) 33 (73)

4 (100) 9 (229) 12 (305) 10.59(269) 18.11(460) 42 (93) 52 (115)

Valve

SizeClass 150

or 10K

Class 300

or 20K

Class 150

or 10K

Class 300

or 20K

H W

L Weight, lbs(kg)


7/147

B6JM Fully Jacketedinch (mm)

* Other sizes available on request

1/2 x 1-1/24.25 (108) 5.5 (140) 5.4 (137) 6.62(168) 5 (12) 7 (15)

(15 x 40)

3/4 x 1-1/24.625 (117) 6 (152) 5.52(140) 6.62(168) 8 (18) 10 (22)

(20 x 40)

1 x 25 (127) 6.5 (165) 6.11(155) 6.62(168) 12 (25) 14 (31)

(25 x 50)

1-1/2 x 2-1/26.5 (165) 7.5 (190) 7.6 (193) 9.06(230) 16 (35) 20 (44)

(40 x 65)

2 x 37 (178) 8.5 (216) 7.88(200) 9.06(230) 23 (51) 28 (63)(50 x 80)

2-1/2 x 47.5 (190) 9.5 (241) 9.02(229) 15.75(400) 36 (79) 44 (97)

(65 x 100)

3 x 58 (203) 11.125(283) 9.45(240) 15.75(400) 43 (95) 53 (117)

(80 x 125)

4 x 69 (229) 12 (305) 10.63(270) 18.11(460) 66 (146) 77 (170)

(100 x 150)

Valve

SizeClass 150

or 10K

Class 300

or 20K

Class 150

or 10K

Class 300

or 20K

H W

L Weight, lbs(kg)

B6SM Screwed / Socket Weld Endinch (mm)

1/2 (15) 3.0 (75) 5.4 (137) 5.12(130) 2.3 (5)

3/4 (20) 3.7 (93) 5.56(141) 5.12(130) 2.5 (5.5)

1 (25) 4.2 (106) 6.11(155) 6.3 (160) 3.6 (8)

1-1/2 (40) 5.1 (130) 7.6 (193) 9.06(230) 6.8 (15)

Valve

Size L H WWeight,

lbs(kg)

B21T 3-Wayinch (mm)

* Other class & sizes available on request

1/2 (15) 6.7 (170) 7.0(180) 3.7 (95) 6.62 (168) 5 (10) 5 (11)

3/4 (20) 6.7 (170) 7.5(190) 3.7 (95) 6.62 (168) 8 (17) 9 (20)

1 (25) 7.5 (190) 7.8(200) 4.61(117) 9.06 (230) 12 (25) 13 (28)

1-1/2 (40) 8.7 (220) 10.6(270) 5.71(145) 15.75 (400) 14 (30) 16 (35)

2 (50) 9.7 (246) 11.4(290) 5.71(145) 15.75 (400) 18 (40) 21 (45)

2-1/2 (65) 13.0 (330) 13.1(334) 6.85(174) 18.11 (460) 25 (55) 28 (62)

3 (80) 14.2 (360) 16.1(410) 7.01(178) 18.11 (460) 34 (75) 39 (85)

4 (100) 16.9 (430) 19.7(500) 10.63(270) 39.37(1000) 59 (130) 68 (150)

6 (150) 20.0 (510) 22.0(560) 11.58(294) 39.37(1000) 73 (160) 82 (180)

Valve

SizeClass 150

or 10K

Class 300

or 20K

Class 150

or 10K

Class 300

or 20K

H W

L Weight, lbs(kg)

W

W

L

L

L

W

H

H

H

L/2


8/148

Outline Dimensions

B21M Trunnion Mounted Ball Valve

inch (mm)

2 (50) 7 (178) - 8.5 (216) - 5.59(142) - - - 23 (51) 28 (63)

2-1/2(65) 7.5(190) - 9.5 (241) - 7.25(184) - - - 36 (79) 44 (97)

3 (80) 8 (203) - 11.125(283) - 7.64(194) - - - 43 (95) 53 (117)

4 (100) 9 (229) - 12 (305) - 11.78(299) - - - 66 (146) 77 (170)

6 (150) 15.5(394) 18 (457) 15.88 (403) 18 (457) 12.41(315) 0.4 (10) 8.51(216) 8.27(210) 175 (386) 205 (452)

8 (200) 18 (457) 20.5(521) 19.75 (502) 20.5(521) 13.27(337) 0.4 (10) 8.51(216) 8.27(210) 270 (595) 310 (683)

10 (250) 21 (533) 22 (559) 22.38 (568) 22 (559) 15.16(385) 0.59(15) 13.98(355) 12.21(310) 405 (893) 530 (1168)

12 (300) 24 (610) 25 (635) 25.5 (648) 25 (635) 16.3 (414) 0.59(15) 13.98(355) 12.21(310) 585(1290) 780 (1720)

Valve

Size Class 150

or 10K

Class 300

or 20K

Class 150 or 10K

RF RFWE WE

Class 300 or 20K H or H1 A B C

Weight, lbs(kg)L

RF : Raised Face Flange WE : Welding End Reduced bore available

Class : 10K / 20K, 150 / 300

Class : 40K, 600 - 1/2(15) to 1-1/2(40) (Floating Ball Design)

inch (mm)

1/2 (15) 6.5 (165) 3.55(90) 300(11.82) 14 (31)

3/4 (20) 7.5 (191) 3.55(90) 300(11.82) 16 (35)

1 (25) 8.5 (216) 3.74(95) 300(11.82) 22 (49)

1-1/2 (40) 9.5 (241) 9.74(95) 450(17.72) 26 (57)

Valve

SizeL H W

Weight,

lbs(kg)

Size 2(50) to 4(100) Size 6(150) to 12(300)

W

W

B

A

H

H

H1

C

L

L

L


9/149

inch (mm)Class : 40K, 600 - 2(50) to 12(300)

2 (50) 11.5 (292) 4.14(105) 5.28(134)23.63(600)

34 (34)

2-1/2 (65) 13 (330) 4.53(115) 6.89(175) 44 (97)

3 (80) 14 (356) 5.12(130) 7.48(190)29.53(750)

0.4 (10) 8.51(216) 8.27(210)66 (145)

4 (100) 17 (432) 6.46(164) 8.6 (220) 120 (265)

6 (150) 22 (559) - 12.05(306) -0.59(15) 13.98(355) 12.21(310)

275 (606)

8 (200) 26 (660) - 14.41(366) - 510 (1124)

10 (250) 31 (787) - 15.16(385) -0.71(18) 15.24(387) 19.69(500)

800 (1764)

12 (300) 33 (838) - 17.25(438) - 1110 (2447)

Valve

SizeH

L

(RF & WE)H1 W A B C

Weight,

lbs(kg)


inch (mm)Class : 900 - 2to 12

2 (50) 14.49(368) 4.93(125) - 13.78(350) - - - 34 (75)

2-1/2 (65) 16.5 (419) 5.52(140) -22.05(560)

- - - 59 (130)

3 (80) 15 (381) 6.11(155) - - - - 85 (187)

4 (100) 18 (457) 7.68(195) - 35.83(910) - - - 180 (397)

6 (150) 24 (610) - 9.45(240) -3.93(100) 10.36(263) 23.63(600)

390 (895)

8 (200) 28.9 (734) - 10.83(275) - 640 (110)

10 (250) 33 (838) - 8.67(220) -5 (127) 11.7 (297) 27.56(700)

960 (2116)

12 (300) 38 (965) - 14.37(365) - 1330 (2932)

Valve

SizeH

L

(RF & WE)H1 W A B C

Weight,

lbs(kg)


inch (mm)Class : 1500 - 2to 12

2 (50) 14.49(368) 4.93(125) - 13.78(350) - - - 59 (130)

2-1/2 (65) 16.5 (419) 5.52(140) -22.05(560)

- - - 76 (168)

3 (80) 18.51(470) 6.11(155) - - - - 109 (240)

4 (100) 21.5 (546) 7.68(195) - 35.83(910) - - - 141 (310)

6 (150) 27.76(705) - 9.45 (240) -3.93(100) 10.36(263) 23.63(600)

460(1014 )

8 (200) 32.76(832) - 10.83 (275) - 760 (1676)

10 (250) 39 (991) - 8.67 (220) -5 (127) 11.7 (297) 27.56(700)

1150 (2535)

12 (300) 44.5(1130) - 14.37 (365) - 1590(3505 )

Valve

SizeH

L

(RF & WE)H1 W A B C

Weight,

lbs(kg)


Size 2" (50) to 4" (100) Size 2" (50) to 4" (100) Size 6" (150) to 12" (300)

Gear Operated (Option)

W

B

B

A

A

H H

1H1

C

C

LL

L


10/1410

Outline Dimensions

Class : 10K/ 20K, 150/ 300inch (mm)

B21PM Pocket-Less

2 (50) 11.5 (292) 4.1 (105) 5.28(134)23.63(600)

1.34 (34) 51 (23) 63 (28)

2-1/2(65) 13 (330) 4.5 (115) 6.89(175)0.4 (10) 8.51(216) 8.27(210)

1.74 (44) 79 (36) 97 (44)

3 (80) 14 (356) 5.1 (130) 7.48(190)29.53(750)

2.6 (66) 95 (3) 117 (53)

4 (100) 17 (432) 6.5 (164) 8.67(220) 4.73 (120) 146 (66) 170 (77)

6 (150) 22 (559) -12 (305)

-0.59(15) 13.98(355) 12.21(310)

10.83 (275) 386 (175) 452 (205)

8 (200) 26 (660) - - 20 (510) 595 (270) 683 (310)

10 (250) 31 (787) - 15.16(385) - 31.5 (800) 893 (405) 1168 (530)

12 (300) 33 (838) - 17.25(438) - 0.71(18) 15.24(387) 19.69(500) 43.7 (1110) 1290 (585) 1720 (780)

14 (350) 35 (889) - 17.92(455) - 44.5 (1130) 1775 (805) 2403 (1090)

16 (400) 39 (991) - 18.59(472) - 0.79(20) 21.26(540) 27.56(700) 62.21(1580) 2359 (1070) 3263 (1480)

Valve

SizeClass 150

or 10K

Class 300

or 20K

Class 150

or 10K

Class 300

or 20K

H H1 W A B C

Weight, lbs(kg)L

Class : 40K, 600inch (mm)

1/2 (15) 6.5(165)3.55 (90)

- - - - 13 (29)

3/4 (20) 7.5(191) - 11.82(300) - - - 15 (33)

1 (25) 8.5(216)3.74 (95)

- - - - 21 (46)

1-1/2 (40) 9.5(241) - 17.72(450) - - - 23 (51)

2 (50) 11.5(292) 4.14(105) 5.28(134)23.63(600)

34 (75)

2-1/2 (65) 13 (330) 4.53(115) 6.89(175)0.4 (10) 8.51(216) 8.27(210)

44 (97)

3 (80) 14 (356) 5.12(130) 7.48(190) 29.53(750) 66 (145)4 (100) 17 (432) 6.46(164) 8.67(220) 120 (265)

6 (150) 22 (559) - 12 (305) -0.59(15) 13.98(355) 12.21(310)

275 (606 )

8 (200) 26 (660) - 14.41(366) - 510(1124)

Valve

SizeHL H1 W A B C

Weight,

lbs(kg)


ANSI 150#, 300#, JIS 10K, 20K ANSI 150#, 300#, JIS 10K, 20K ANSI 600#, JIS 40K ANSI 600#, JIS 40K

Size 1/2" (15) to 5" (125) Size 6" (150) to 16" (400) Size 1/2" (15) to 4" (100) Size 2" (50) to 8" (200)Gear Operated(Option)

W

A

A

B

B

W

L

L L L

HH1

H1

C

C

H


11/1411

1 Fire Safe : Graphite 2 See Hard-Facing Specification

How to Specify

Bill of Material

Example : 6B6MFARA1BJED3 : 6B6M Series Metal Seated Ball Valve, Full Bore, 150#, RF Flanged End, WCB Body, CF8M/TCC Ball,316L/ST6 Metal Seat, Actuator Operator

( ) JIS materials designation * Other materials available on request

Specify

You

Size

B6M

B6SM

B6EM

B6JM

B21M

B21PM

F = Full

Bore

R = Red

Uced

Bore

1 = 10K

2 = 20K

3 = 40K

4 = 63K

A = 150

B = 300

C = 600

D = 900

E = 1500

F = 2500

R =RF

FLG.

F = FF

FLG.

T = RTJ

W = Butt

Weld

A1 = WCB(SCPH2)

A2 = LCB(SCPL1)

A4 = CF8(SCS13A)

A5 = CF3(SCS19A)

A6 = CF8M(SCS14A)

A7 = CF3M(SCS16A)

A8 = CD4McuN

AF = A105/ENP

AR-LF2/ENP

S1 = A105

S4 = F304

S6 = F316

Etc...

AF = A105/ENP

AG = A105/TCC

AJ = A105/Ni-Cr

AW = CF8/ENP

AX = CF8/TCC

AZ = CF8/Ni-Cr

BB = CF8M/ENP

BC = CF8M/TCC

BE = CF8M/Ni-Cr

JB = 304L/STELLITE

JE = 316L/STELLITE

Etc...

JA = 304L/ST1

JB = 304L/ST6

JC = 304L/ST6/TCC

JD = 316L/ST1

JE = 316L/ST6

JF = 316L/ST6/TCC

JR = 304L/Ni-Cr

JS = 316L/Ni-Cr

Etc...

0 = Bare

Stem

1 = Wrench

2 = Gear

3 = Actuator

Z = Fire Safe

V = Vacuum

Service

N = NACE

T = Extended

Stem

L = VOC

Packing

Etc

Size SymbolBore

Design

Pressure

Class

End

Connection Body Ball Seat Retainer Metal Seat

Operator Option

Material *

CF8/ENPC CF8/ENP CF8M/ENP CF3/ENP CF8M/ENP CF3M/ENP

304 316 304L 316 316L

304L / Stellite 316L / Stellite 304L / Stellite 316L / Stellite

Body/Closure

Body Gasket

Hard-Faced Ball2

Stem

Metal Seat 2

Packing

Stud Bolt

Nut

Material

PartsWCB

WCB

B7 B8

2H 8

CF3 CF8M

CF8MCF3

CF3M

CF3M

CF8

CF8

PTFE 1

PTFE 1

Hard-Facing Specification

Electro-less Nickel

Phosphorus (ENP)

Tungsten Carbide(WC)

80Ni-20Cr

Stellite 1, 3, 6, 12

Type

Materials *Hardness

Working

TemperatureProcess Service

Hv 700 350 Plating

HRc 60~70 400 HVOF *3

HRc 50~60 800 PTA *4, Fusing

HRc 40~55 400 PTA, Welding

For food industry, gas, sea water, coal mines, offshore, caustic solution.

For liquid or gas services with high presence of solids. Not suitable whensmallpresence of caustic soda is expected.

For abrasive media such as coke, particle and Catalyst handling.

For liquid or gas services with small presence of solids.Suitable when small presence of caustic soda is expected.Best on dry gas or steam services.

3 HVOF : Thermal Spray (High Velocity Oxy Fuel) * Other materials available on request4 PTA : Thermal Spray (Plasma Transfer Arc)


12/1412

10(DN250) & 12(DN300) Class 300

Side-entry.(Indonesia)

26(DN650) Class 150

Installed and operating at oil field

in the Middle east.(UAE)

12(DN300)

Class 1500

Forged body for gas

application.(Mexico)

6(DN150) Class 150

Automated ball valve on

chemical pipe line.

6(DN150) Class 1500

Forged body before paint.(Korea)

Automated small size ball valves

before shipment.

16(DN400) Class 300

After fully automation.(Taiwan)

20(DN500) & 24(DN600) Class 150 fully automated

valves on final Inspection for oil application.(Indonesia)

8(DN200) Class 1500

Duplex casting body.(Korea)

Products & Service


13/1413

Applicable StandardsYPPC ball valves are generally in accordance with API, ANSI,JIS and BS requirements.

The following list contains the most important applicable standards for ball valves.

YPPC valves may be designed, manufactured and tested in accordance with other international standards on request.

American Petroleum Institute

American Society of Mechanical Engineers

Japanese Industrial Standard

British Standard

Manufactures Standardization Society

National Association of Corrosion Engineers

Instrument Society of America

International Organization for Standardization

Spec. 6A Specification for Wellhead and Christmas Tree Equipment

Spec. 6D Specification for Pipeline Valves

Spec. 6FA Specification for Fire Test for Valves

Std. 598 Valve Inspection and Test

Std. 607 Fire Test for Soft-seated Quarter-turn Valves

B 16.5 Pipe Flanges and Flanged FittingsB 16.10 Face to face and End to end Dimensions of Ferrous Valves

B 16.34 Valves-flanged and Butt-welding end

B 2001 Nominal Size and Bore of Valves

B 2002 Face to face and End to end Dimensions of Valves

B 2003 General Rules for Inspection of Valves

B 2210 Flanged and Fittings

BS 5159 Specification for Cast Iron and Carbon Steel Ball Valve for General Purposes

BS 5351 Steel Ball Valves for the Petroleum, Petrochemical and Allied Industries

BS 6755 Part 1 Specification for Production Pressure Testing Requirements

BS 6755 Part 2 Specification for Fire-Testing Requirements

SP 6 Standard Finishes for Contact faces of Pipe Flanges and Connecting-end Flange of Valves and Fittings

SP 25 Standard Marking System for Valves, Fittings, Flanges and Unions

SP 44 Steel Pipe Line Flanges

SP 61 Pressure Testing of Steel Valves

SP 72 Ball Valves with Flanged or Butt-welding ends for General Service

MR 0175 Sulfide Stress Cracking Resistant Metallic Material for Oilfield Equipment

5208 Industrial Valves -Pressure Testing of Valves

5211 Part 1 Part-Turn Valve Actuator Attachment - Part 1 : Flange Dimensions

5211 Part 2 Part-Turn Valve Actuator Attachment - Part 2 : Flange and Coupling Performance Characteristics

5211 Part 3 Part-Turn Valve Actuator Attachment - Part 3 : Dimensions of Driving Components

10423 Petroleum and natural gas industries?Drilling and production equipment?Wellhead and Christmas

tree Equipment

S93.00.01 Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves


14/14

Bulletin YB-12-D (AUG. 2009) This catalogue is subject to change without notice.

YPPC provides

single-source responsibility

for your valve automation needs.

From the Cradle

To the Grave for Valves

YOUNG POONG PRECISION CORPORATION

Automated valve assembled withFlowserve-Automax actuation packages.

Head Office : 142, Nonhyun-dong, Kangnam-gu,

Seoul, Korea

TEL (02) 519-3508, 3524, 3526, 3528FAX (02) 519-3525

Banwol : 491-3, Moknae-dong, Danwon-gu,

Plant Ansan-shi, Gyeonggy-do, Korea

TEL (031) 491-5581 - 4

FAX (031) 492-6496

Cast : 363-158, Kyongseo-dong, Seo-gu,

Foundry Incheon, Korea

TEL (032) 561-5581

FAX (032) 561-5580

Ulsan Office : 1040, Whasan-ri, Onsan-eup, Uljoo-gun,

Ulsan, Korea

TEL (052) 239-9963FAX (052) 238-2338

Yeosoo : 205-1, Hak-dong, Yeosoo-shi, Jeonnam,

Office Korea

TEL (061) 682-5033, 5004

FAX (061) 682-3132

URL : http://www.yppc.co.kr

E-mail (sales) [email protected]

Distributed by:

Metal Seated Ball Valves

Documents