Meitrack Manager & Parameter Editor

Meitrack Manager& Parameter Editor

Purpose• Configure Meitrack’s GPS Trackers• Dedicated Interface TC68, MT90, T1, MVT600• Supports TC68, MT90, T1, MVT600, MVT100,

MVT800, T322, T311

unboxing Package

• USB Cable• User Manual• Warranty Card• Mini CD-ROM• Windows XP or higher

• IMEI Number • Firmware• Rename option

Check-box Options• Lights – on /off• Incoming calls – on /off• GPRS Button – on /off• GPS Log Button – on /off• 3D Shake Wake up –on /off

Tracker Tab

ratonsito

• Battery Left• Sleep Mode OFF | Normal Sleep | Deep Sleep

Tracker TabNormal Sleep: GSM works, GPS intermediate, 25% power.Deep Sleep: GPS Stops, GSM goes into sleep mode

• Log dataStores tracker positions as long as you have GPS signal

• BufferStores Tracker positions Blind Spot (GPS signal failure)

• SMSStores SMS messages “commands” that fail to be sent

• Log IntervalInterval that the log will be recorded (seconds)

• Tow AlarmSet the seconds for the tow alarm to work under.

• Check Device Automatically/Set Device ConnectionSet Meitrack Manager to detect automatically or manually

• Upgrade VersionUpgrade to get the newest version

• RefreshWill refresh the page

• Restore Factory SettingsDeletes all info from settings

• Save SettingsSave current settings, exports .mms file

• Load SettingsLoads previously saved settings (.mms file)

Tracker Tab

SMS Tab

• SMS Password

• SMS Time zone

Set password 4 digit numbers to send command to tracker & using MS02 platform

SMS Tab

Set your current time zone in minutes. Using GMT

• Authorization NumbersPhone numbers that the tracker can send notifications to

The number that the S.O.S. call goes to

SMS Tab• S.O.S. Call

• Reject Incoming CallThis reject incoming calls from the number

• Auto Answer Incoming CallPicks up the call automatically from authorized number(s)

• Location ReportSends the selected phone number location report SMS w/ link location

• S.O.S. Alarm (rename option)Sends S.O.S. alarm when button is pressed, can be renamed according to client.

• Low Battery Alarm (rename option)

Sends low battery alert when battery is below 3.5V, can be renamed according to client.

• Speeding Alarm (rename option) [max speed]Sends speeding alarm notification via SMS

• GPS Blind Alarm (rename option)Sends SMS alert when tracker GPS signal is cut off / on to authorized numbers

• Sleep AlarmSends SMS alert when tracker enters/exits deep sleep SMS Tab• Distance Interval AlarmSends SMS to authorized number(s) according to the set distance interval

• Tow Alarm (rename option)

Sends Tow alarm via SMS to authorized number(s)

• Reboot (rename option)Sends Tow alarm via SMS to authorized number(s)

• Geo Fence Alarm (rename option)Sends SMS alert when tracker enters/ exits geo fence

• Monitor Phone NumberNumber that will call device to monitor (listen in). Device automatically will answer

• SMS Report Interval

• SMS Track NumberNumber where the SMS reports will be sent to

Set interval for SMS reports to be sent out

SMS Tab

• Auto Report TimesLimit of reports to be sent out

GPRS Tab

• GPRS TCP

GPRS Tab

Protocol that uses 2 way communication. Confirms received communication. Most reliable

• GPRS UDPProtocol that uses 1 way communication. Does not confirm communication received. Less data usage

• IP / DomainInput Internet Provider address or domain

• PortCommunication port for server.

• APN (Access Point Name)Service Provider Connection (cell company)

• GPRS Time IntervalSet the time of how often tracker reports to the platform [X] 10

• GPRS Report TimeCan set a limit to the number of reports to platform

• GPRS Time ZoneSet the time based on your current location. GMT

• S.O.S. Alarm

GPRS TabTurns on / off S.O.S. alarm to be sent out

• Low Battery AlarmTurns on / off low battery alarm to be sent out

• Speeding AlarmSets speeding alarm on / off to be sent out

• GPS Blind AlarmTurns on / off the GPS blind alarm to be sent out. Enter, exit or both

• Sleep AlarmTurns on / off tracker alarm when tracker is in sleep mode. Enter, exit or both

• Distance Interval AlarmTurns on / off & sets distance alarm to be sent out

• Tow AlarmTurns on / off tow alarm to be sent out. Works when tracker is in deep sleep mode

GPRS Tab• RebootTurns on / off alarm notification when tracker is turned on

• Heartbeat ReportTurns on / off heartbeat report which makes sure tracker is reporting to platform

• Heading ChangeTurns on / off heading change report which lets you know if tracker changes direction according to the degree set

• Geo Fence AlarmTurns on / off alert when tracker either enters or exits (or both) geo fence

• GPS Log is to retrieve log data from the tracker.• Data can be exported as Excel, CSV, or KML files.• Can only retrieve log data from tracker.

GPS Log

Parameter Editor

Purpose

• Configure Meiligao GPS Trackers• Supports GT30i, GT60, MT80, MT88, VT300, VT310 VT400

SMS Tab

• Phone NumberSet the phone number to receive SMS location reports

• SMS Report Interval Set SMS report interval in the amount of minutes to be sent out

• Auto Report TimesSet auto report times to be sent out

• User Password: Set password 4 digit numbers to send command to tracker & using MS02 platform

• Read Button

• Write ButtonReads the current tracker’s settings

Write setting to the tracker

• COM dropdown menuSelect the COM number according to the device manager

• Device Model dropdown menuSelect your device that is being configured

GPRS Tab• GPRS IntervalSet the Tracking Interval by time (seconds)

• IP & PortEnter IP and the Port

• APN , User Name & PasswordAccess point name from cellular provider

• GPRSSelect TCP / UDP options

• Tracker IDIMEI Number automatically displays

GPRS Tab• Low Battery

Turn on / off low battery alert. Battery below 3.5V

• SpeedingTurn on / off speeding alert alerts

• Geo Fence Enter / ExitTurn on / off geo fence enter / exit alerts

• S.O.S. PressedSend SMS alert when S.O.S. button is pressed. On / Off

• GPS Signal (lost / recovery)Turns on / off GPS signal lost / recovery alerts

• Device Power OnTurns on / off power on device alert

• Heartbeat ReportTurns on / off heartbeat report

• Heading ChangeTurns on / off heading change report

• Distance Interval TrackingTurns on / off distance interval tracking alerts

• Tow Turns on / off tow alarm alert

Main Settings Tab• SMS Time Zone

Set time zone for SMS reports. GMT

• GPRS Time ZoneSet time for GPRS reports. GMT

• Distance IntervalSet distance interval for SMS GPRS tracking

• ProtocolAuto Event Report

• Heading Change ReportSet heading direction degree limit for tracker

• Speeding AlarmSet speeding alarm in Kilometers

• Heartbeat IntervalSet heartbeat interval reports, in minutes.

• Log IntervalInterval for storing GPS data into memory

• Sleep ModeSet sleep mode for tracker’s GPS module

• Tow Alarm Set the tow alarm sensitivity (time it trembles)

• LED OffTurns off / on tracker notification lights

• Buzzer OffTurns on / off buzzer when call is coming in (compatible units)

Geo Fence Settings Tab

• LatitudeLatitude in decimal degrees of waypoint center

• LongitudeLongitude in decimal degrees of wp center

• RadiusRadius in meter of the center

• Way Point8 waypoints can be set for geo fence alarm

• In Alarm On / Off when trackers enters waypoint

• Out AlarmOn / Off when tracker exits the waypoint

• ReadRead tracker’s settings

• WriteWrite settings to the tracker

Authorization Tab

• Authorization PhonePhone numbers receiving SMS reports and events selected

• Listen-in Phone NumberAuthorized phone numbers that can listen-in (compatible units)

SMS Header Tab

• Set SMS header of each event. This will show at the beginning of the SMS message

Questions?

• NO? …..Good. Thank you for your time!