Sistemas de Control Atmosférico îs.28560 Especificaciones del sistema El módem inalámbrico MAXtend ® está diseñado para instalación en un contenedor de carga y transmisión de datos por comunicación 3G. Los datos son suministrados por un Control de registro de datos montado en otro sitio. El módem funciona a pilas y está conectado al Control de registro de datos por medio de un cable interfaz RS-232. La función principal es la transmisión poco frecuente de datos de forma transparente hacia el servidor remoto por 3G y usando el protocolo HTTP. Entretanto, el módem recibe y almacena datos enviados por el Control de registro de datos. Especificaciones técnicas: • No. de módem: MaxWireless-3G • Temperatura de funcionamiento: -40°C a +85°C • Comunicación a dispositivo auxiliar: RS232 cable (up to 3 metres) y Bluetooth Low Energy 4.0 • Tipo de pila: • 3V pila alcalina inclusa; no reemplazable • Duración de las pilas: 100 días - (con GPS) o 60 días - (sin GPS) • Dimensión: 150.79mm x 65.79mm x 62.50mm • Peso: 410 gramos • Especificaciones del módem inalámbrico: • 3G UMTS(WCDMA/FDD) Bandas: 800, 850, 900, 1900, 2100 MHz • 2G Banda Cuadruple GSM Bandas: 850, 900, 1800, 1900 MHz • Antena: Antena penta banda incorporada / 100 mm, conector de tipo U.FL 8dB LNA Gain 1575.42MHz, Antena GPS Activa / conector de tipo 3m SMA • Certificaciones: EMC/EMI y Cumplimiento de seguridad • FCC Parte 15 Clase B • EN 301 489-1, EN 55022(Clase B), EN 6100-4-2, EN 6100-4-3, EN 60905-1 • VCCI • AS/NZS CISPR32, ACMA EMR, ARPANSA • Capacidad de registro de datos: Memoria flash de 4 mega-bitios incluida (equivale a 0,5MB) • Si usa 256 bytes/hora, este módem puede almacenar los datos en una memoria interna por un máximo de 85 días sin transmitir datos. Módem 3G de MAXtend AVCATECH - Advanced Cargo Technologies Maxtend és una división de Unit 35, 170 Forster Road Mt Waverley VIC Australia 3149 Teléfono: +61-3-9652 3600 Email: [email protected]Website: www.maxtend.com.au Marzo 2020
1
Embed
MAXtend® 3G Modem ons Atmosphere Control Systems … · Sistemas de Control Atmosférico îs.28560 Especificaciones de l sistema El módem inalámbrico MAXtend® está diseñado
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Sistemas de Control Atmosférico
îs.28560
Especificaciones del sistema
El módem inalámbrico MAXtend® está diseñado para instalación en un contenedor de carga y transmisión de datos por comunicación 3G. Los datos son suministrados por un Control de registro de datos montado en otro sitio. El módem funciona a pilas y está conectado al Control de registro de datos por medio de un cable interfaz RS-232. La función principal es la transmisión poco frecuente de datos de forma transparente hacia el servidor remoto por 3G y usando el protocolo HTTP. Entretanto, el módem recibe y almacena datos enviados por el Control de registro de datos.
Especificaciones técnicas:
• No. de módem: MaxWireless-3G
• Temperatura de funcionamiento: -40°C a +85°C
• Comunicación a dispositivo auxiliar: RS232 cable (up to 3 metres) y Bluetooth Low Energy 4.0
• Tipo de pila:
• 3V pila alcalina inclusa; no reemplazable
• Duración de las pilas: 100 días - (con GPS) o 60 días - (sin GPS)
• Antena: Antena penta banda incorporada / 100 mm, conector de tipo U.FL8dB LNA Gain 1575.42MHz, Antena GPS Activa / conector de tipo 3m SMA • Certificaciones: EMC/EMI y Cumplimiento de seguridad
• FCC Parte 15 Clase B
• EN 301 489-1, EN 55022(Clase B), EN 6100-4-2, EN 6100-4-3, EN 60905-1
• VCCI• AS/NZS CISPR32, ACMA EMR, ARPANSA
• Capacidad de registro de datos: Memoria flash de 4 mega-bitios incluida (equivale a 0,5MB)
• Si usa 256 bytes/hora, este módem puede almacenar los datos en una memoria
interna por un máximo de 85 días sin transmitir datos.
Módem 3G de MAXtend
Atmosphere Control Systems 2017
MAXtend® 3G Modem
System SpecificationsThe MAXtend® wireless modem is designed to be installed in a shipping container and transmit data via
communications. The data is supplied by a Data Logging Controller mounted elsewhere. The modem is battery powered and is connected to the Data Logging Controller by means of an interface cable, RS-232 and/or Bluetooth Low Energy 4.0. Main functionality is infrequently transmitting data transparently toward remote server through 3G and HTTPS protocol. In the meanwhile, the modem receives and keeps data sent by Data Logging Controller. It also supports logging geographical position by Cell Track and/or GPS.
Technical SpecificationsModem No.: MaxWireless 3G
Operating Temperature: -40oC to +85oC Communication to auxiliary device:
o RS232 cable (up to 3 metres) o Bluetooth Low Energy 4.0
Antenna: o Penta-band GSM/3G embedded type antenna / 100mm U.FL connector type o 28dB LNA Gain 1575.42MHz, Active GPS Antenna / 3m SMA connector type
Certification: EMC/EMI and Safety Compliance o FCC Part 15 Subpart B o EN 301 489-1, EN 301 489-7, EN62311, EN60950-1, EN55032 o VCCI o AS/NZS CISPR32, ACMA EMR, ARPANSA
Data-logging Capacity: o 4Mega-bit Flash memory included(same as 0.5Mbytes) o If using 256 bytes/an hour, this modem could keep the data in an internal memory up to 85 days.
AVCATECH - Advanced Cargo TechnologiesMaxtend és una división de
Unit 35, 170 Forster RoadMt Waverley VIC Australia 3149
System SpecificationsThe MAXtend® wireless modem is designed to be installed in a shipping container and transmit data via 3G communications. The data is supplied by a Data Logging Controller mounted elsewhere. The modem is battery powered and is connected to the Data Logging Controller by means of an interface cable, RS-232 and/or Bluetooth Low Energy 4.0. Main functionality is infrequently transmitting data transparently toward remote server through 3G and HTTPS protocol. In the meanwhile, the modem receives and keeps data sent by Data Logging Controller. It also supports logging geographical position by Cell Track and/or GPS.
Technical Specifications• Modem No.: MaxWireless 3G • Operating Temperature: -40oC to +85oC • Communication to auxiliary device:
o RS232 cable (up to 3 metres) o Bluetooth Low Energy 4.0
• Dimension: 150.79mm x 65.79mm x 62.50mm • Weight: 410 grams
• Wireless modem specification
o 3G UMTS(WCDMA/FDD) Bands: 800, 850, 900, 1900, 2100 MHz o 2G Quad-Band GSM Bands: 850, 900, 1800, 1900 MHz
• Antenna: o Penta-band GSM/3G embedded type antenna / 100mm U.FL connector type o 28dB LNA Gain 1575.42MHz, Active GPS Antenna / 3m SMA connector type
• Certification: EMC/EMI and Safety Compliance
o FCC Part 15 Subpart B o EN 301 489-1, EN 301 489-7, EN62311, EN60950-1, EN55032 o VCCI o AS/NZS CISPR32, ACMA EMR, ARPANSA
• Data-logging Capacity:
o 4Mega-bit Flash memory included(same as 0.5Mbytes) o If using 256 bytes/an hour, this modem could keep the data in an internal memory up to 85 days.
Mitsubishi Australia Limited Telephone: +61 3 9270 6666Maxtend Division Facsimile: +61 3 9270 6698Unit 35, 170 Forster Road Email: [email protected] Waverley VIC Australia 3149 ® Registered trademark of Mitsubishi Australia Limited
System SpecificationsThe MAXtend® wireless modem is designed to be installed in a shipping container and transmit data via 3G communications. The data is supplied by a Data Logging Controller mounted elsewhere. The modem is battery powered and is connected to the Data Logging Controller by means of an interface cable, RS-232 and/or Bluetooth Low Energy 4.0. Main functionality is infrequently transmitting data transparently toward remote server through 3G and HTTPS protocol. In the meanwhile, the modem receives and keeps data sent by Data Logging Controller. It also supports logging geographical position by Cell Track and/or GPS.
Technical Specifications• Modem No.: MaxWireless 3G • Operating Temperature: -40oC to +85oC • Communication to auxiliary device:
o RS232 cable (up to 3 metres) o Bluetooth Low Energy 4.0