8100 Series Macerator Toilets Great Performance. Great Value. Key Benefits n Powerful macerator flush. n Small footprint – fits in most any head compartment. n Standard and low-profile heights. n Through-the-floor and through-the-wall discharge fittings. n Solid wood seat with elongated opening. n “Normal” and “Dry Bowl” flush options. n Convenient electronic flush controls. n 12 V DC or 24 V DC operation. n Available in white. For a powerful macerator toilet in an easy-to-install, easy-to-use fixture, the Dometic 8100 series of MasterFlush™ toilets offers an alternative with appealing value. The electric toilet and flush control panel are the only components to install – no external control module is necessary. Dometic 8100 series macerator toilets provide two flush settings to help manage water use. The “Normal” flush setting adds a small amount of water to the bowl after every flush, and “Dry Bowl” flushing does not add water to the bowl. Because flushes are controlled by how long the flush button is pressed, the average consumption per flush is estimated at 0.6 gallons (2.3 liters). Water can also be added to the bowl when desired. User comfort is enhanced with a solid wood, elongated seat. Two heights are available – standard residential toilet height and a low-profile design that accommodates raised platform installations. Each model includes discharge fittings for through-the-floor or above-floor plumbing.
For a powerful macerator toilet in an easy-to-install, easy-to-use fixture, the Dometic 8100 series of MasterFlush™ toilets offers an alternative with appealing value. The electric toilet and flush control panel are the only components to install – no external control module is necessary.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
8100 Series Macerator Toilets GreatPerformance.GreatValue.
Key Benefits
nPowerful macerator flush.
nSmall footprint – fits in most any head compartment.
nStandard and low-profile heights.
nThrough-the-floor and through-the-wall discharge fittings.
Technical Specifications for 8100 Series MasterFlush™ ToiletsModel Description Discharge Voltage
8112 Low-profile macerator toilet 1.5 in./38 mm ID 12 V DC
8116 Low-profile macerator toilet 1.5 in./38 mm ID 24 V DC
8152 Standard-height macerator toilet 1.5 in./38 mm ID 12 V DC
8156 Standard-height macerator toilet 1.5 in./38 mm ID 24 V DC
Specifications subject to change without notice.
Minimum System Requirements
ElectricalCircuit breaker 20 amps/12 V DC; 15 amps/24 V DC
Wiring 12 ga. (up to 20 ft./6.1 m from breaker)
WaterSupply
Fitting 0.5 in. NPT
Flow rate 2.5 gpm/9.5 lpm min. at toilet
Discharge
Fitting 1.5 in. NPT
Horizontal run* 98 ft./30 m maximum
Vertical run* 9.8 ft./3 m maximum
Tank capacity 30 gal./114 liters recommended
* Horizontalandverticalrundistancesarenotcumulative.Checkforadequatedischargeflowifinstallationnears oneoftheselimits.Specifications subject to change without notice.
L-2912REV9/10
8600 Series MasterFlush Toilets Bringingstyle,qualityandversatilitytogether.
Model 8679 MasterFlush Toilet
Rarely does one marine toilet fit a wide array of floor plans with
n Flat back-style ceramic fixture – fits nicely against interior walls.
n Standard and low-profile heights.
n Ultra-quiet – integral water trap reduces macerator sound (tall models only).
n Through-the-floor and through-the-wall discharge fittings.
n “Soft close” seat action.
n “Normal” or “Dry Bowl” flush options.
n Standard Dometic electronic touchpad or popular Vimar and Gewiss switch options.
n 12 V DC or 24 V DC operation.
DOMETIC CORPORATION, SANITATION DIVISION13128 SR 226, PO Box 38 l Big Prairie, OH 44611 USA l 330-496-3211 l Fax 330-496-9097www.dometic.com l [email protected]
L-2913 REV 9/10
Dealer:
EnvironmentallyResponsible
Technical Specifications for 8600 Series MasterFlush™ ToiletsModel Description Voltage
8639 Low-profile macerator toilet 12 V DC
8630 Low-profile macerator toilet 24 V DC
8679 Standard-height macerator toilet 12 V DC
8670 Standard-height macerator toilet 24 V DC
Available in white and bone colors. Specifications subject to change without notice.
Dimensions
Flush SettingsChange from “Normal” to “Dry Bowl” flush option by pressing “flush” switch for about five seconds. When “power on” light begins flashing, release “flush” switch. Flush setting has been changed. Change back to “Normal” setting in the same manner.
8630/8639
8670/8679
Minimum System Requirements
ElectricalCircuit breaker 20 amps/12 V DC; 15 amps/24 V DC
Wiring 12 ga. (up to 20 ft./6.1 m from breaker)
Water Supply
Fitting 0.5 in. NPT
Flow rate 2.0 gpm/7.6 lpm min. at toilet
Discharge
ID 1.5 in./38 mm or 1 in./25 mm minimum
Horizontal run* 98 ft./30 m maximum
Vertical run* 9.8 ft./3 m maximum
Tank capacity 30 gal./114 liters recommended
Required Components Electric flush switch** Dometic, Vimar or Gewiss
* Horizontal and vertical run distances are not cumulative. Check for adequate discharge flow if installation nears one of these limits.** Purchased separately.Specifications subject to change without notice.
Dometic Touchpad
Standard Dometic panel includes “add water” and “flush” functions, “power on” and “full tank” indicator lights. Also available in white.
Vimar Switches, Indicators
Gewiss Switches, Indicators
Available in black only.
Full Tank/ Do Not Flush
Indicator
Full Tank/ Do Not Flush
Indicator
Full Tank/ Do Not Flush
Indicator
Add Water/ Flush
Switch
Add Water/ Flush
Switch
Add Water/ Flush
Switch
8700 Series Macerator Toilets Premiumeleganceandcomfort.
8700 series MasterFlush toilet
with electronic touchpad
8700 series MasterFlush toilet with electronic flush handle
For the look, feel and user-friendly performance of an upscale residential toilet,Dometic8700seriesmaceratortoilets,poweredwithMasterFlush™technology,deliveritall.
n Standard height models with full-size residential-style seat.
n Through-the-floor and through-the-wall discharge fittings.
n “Normal” or “Dry Bowl” flush options.
n Electronic flush handle, standard electronic touchpad, or popular Vimar and Gewiss switch options.
n 12 V DC or 24 V DC operation.
DOMETIC CORPORATION, SANITATION DIVISION13128 SR 226, PO Box 38 l Big Prairie, OH 44611 USA l 330-496-3211 l Fax 330-496-9097www.dometic.com l [email protected]
L-2914 REV 9/10EnvironmentallyResponsible
Minimum System Requirements
ElectricalCircuit breaker 20 amps/12 V DC; 15 amps/24 V DC
Wiring 12 ga. (up to 20 ft./6.1 m from breaker)
Water Supply
Fitting 0.5 in. NPT
Flow rate 4 gpm/ 15.1 lpm min. at toilet
Max. flow pressure 40 PSI/276 kPa
Discharge
ID 1.5 in./38 mm or 1 in./25 mm minimum
Horizontal run* 98 ft./ 30 m maximum
Vertical run* 9.8 ft /3 m maximum
Tank capacity 30 gal./114 liters recommended
Required Components Electric flush switch** Dometic, Vimar or Gewiss
* Horizontal and vertical run distances are not cumulative. Check for adequate discharge flow if installation nears one of these limits.** Purchased separately.Specifications subject to change without notice.
Dimensions
Dometic Touchpad
MasterFlush Status Panel
8759 without flush handle
8759 with flush handle
Standard Dometic panel includes “add water” and “flush” functions, “power on” and “full tank” indicator lights. Also available in white.
Indicates, “power on” and “full tank” status. Used only with flush handle toilet models.
Flush SettingsChange from “Normal” to “Dry Bowl” flush option by pressing “flush” switch or flush handle for about five seconds. When “power on” light begins flashing on indicator panel, release “flush” switch. Flush setting has been changed. Change back to “Normal” setting in the same manner.
Specifications for 8700 Series MasterFlush™ ToiletsModel / Series
Flushing Technology
Flush Switch Options HeightMatching
BidetFlat back Colors Seat
8700 MaceratorWall mounted switch
(not included) or flush handle on toilet
Tall only No YesWhite, bone
Elongated, solid wood
Vimar Switches, Indicators
Gewiss Switches, Indicators
Available in black only.
Full Tank/ Do Not Flush
Indicator
Full Tank/ Do Not Flush
Indicator
Full Tank/ Do Not Flush
Indicator
Add Water/ Flush
Switch
Add Water/ Flush
Switch
Add Water/ Flush
Switch
All dimensions may vary ± 0.375 in.(10 mm)
8900 Series Macerator Toilets SimpleElegance.UnlimitedPossibilities.
Model 8979 MasterFlush Toilet
One luxurious look – with many designer-friendly options.
n Small footprint – fits in most any head compartment.
n Standard and low-profile heights.
n Through-the-floor and through-the-wall discharge fittings.
n Toilet only or toilet/bidet combination models.
n “Soft close” seat hinge.
n “Normal” or “Dry Bowl” flush options.
n Dometic electronic touchpad or popular Vimar and Gewiss switch options.
n 12 V DC or 24 V DC operation.
n Fits in same footprint as 4800 series VacuFlush® toilets.
DOMETIC CORPORATION, SANITATION DIVISION13128 SR 226, PO Box 38 l Big Prairie, OH 44611 USA l 330-496-3211 l Fax 330-496-9097www.Dometic.com l [email protected]
L-2915 REV 9/10
Dealer:
EnvironmentallyResponsible
Dimensions
Dometic Touchpad
8939 8979
Standard Dometic panel includes “add water” and “flush” functions, “power on” and “full tank” indicator lights. Also available in white.
Flush SettingsChange from “Normal” to “Dry Bowl” flush option by pressing “flush” switch for about five seconds. When “power on” light begins flashing, release “flush” switch. Flush setting has been changed. Change back to “Normal” setting in the same manner.
Technical Specifications for 8900 Series MasterFlush™ ToiletsModel Description Voltage
8939 Low-profile macerator toilet 12 V DC
8930 Low-profile macerator toilet 24 V DC
8979 Standard-height macerator toilet 12 V DC
8970 Standard-height macerator toilet 24 V DC
8989 Standard-height macerator toilet/bidet combination 12 V DC
8980 Standard-height macerator toilet/bidet combination 24 V DC
Available in white or bone colors. Specifications subject to change without notice.
Vimar Switches, Indicators
Gewiss Switches, Indicators
Available in black only.
Full Tank/ Do Not Flush
Indicator
Full Tank/ Do Not Flush
Indicator
Full Tank/ Do Not Flush
Indicator
Add Water/ Flush
Switch
Add Water/ Flush
Switch
Add Water/ Flush
Switch
All dimensions may vary ± 0.375 in.(10 mm)
Minimum System Requirements
ElectricalCircuit breaker 20 amps/12 V DC; 15 amps/24 V DC
Wiring 12 ga. (up to 20 ft./6.1 m from breaker)
Water Supply
Fitting 0.5 in. NPT
Flow rate 2.0 gpm/7.6 lpm min. at toilet
Discharge
ID 1.5 in./38 mm or 1 in./25 mm minimum
Horizontal run* 98 ft./30 m maximum
Vertical run* 9.8 ft./3 m maximum
Tank capacity 30 gal./114 liters recommended
Required Components Electric flush switch** Dometic, Vimar or Gewiss
* Horizontal and vertical run distances are not cumulative. Check for adequate discharge flow if installation nears one of these limits.** Purchased separately.Specifications subject to change without notice.