Marcom Products Catalogue - Remote Control - English

Industrial Design

• DIN bar mount

• Wide temperature working range: -20 ~

70°C

• Power Supply: 1 2 ~ 48 VDC, industrial

terminal block

• EMI Immunity

Advanced Features

• VPN: IPSec, PPTP, L2TP, GRE, SSL,

OpenVPN

• RS232/RS485 Serial port

• Industrial Protocol support: Modbus,

Virtual COM, . . .

• Central ized management software

• Upgradable Firmware

Speed and Reilability

• UMTS/HSUPA/HSDPA Connection

• Processor 200 MIPS ARM9, 1 6 Mbytes

SDRAM

• Hardware Watchdog

• Ping Reboot Feature

• Firewall and access control

MARCOM S.r. l . Automazioni basate sul le nuove tecnologie

INDUSTRIAL HSUPA ROUTERIR791WH01 / IR794WH01

New generation industrial router with advanced features.

New generation HSUPA router with advanced features. Allows to connect to remote units not reached

by ADSL, through fast internet connection offered by mobile cel lular operators. Connection can be

opened by SMS or call . Works in extremely hard temperature conditions: -20~70°C. Support for VPN

and OpenVPN connections.

www.marcomweb. it

http://www.marcomweb.it

www.marcomweb. it

TECHNICAL DATA IR791WH01 IR794WH01

LAN Interfaces 1 x RJ45, 1 0/1 00 Mbps 4 x RJ45, 1 0/1 00 Mbps

Insulation Protection 1 ,5 kV

Serial Interface 1 x RS-232 or 1 x RS-485

ESD Protection 1 5 kV

Serial Protocols Transparent TCP, Virtual COM, Modbus RTU

WAN Interface UMTS / HSDPA / GPRS

UMTS / HSDPA 850 / 900 / 1 800 / 1 900 / 21 00 Mhz

GSM / GPRS 850 / 900 / 1 800 / 1 900 Mhz

Authentication CHAP / PAP

SIM Card 3V, fl ip SIM card, Anti-dismantlement

Supported VPN OpenVPN, IPSec, GRE, PPTP, L2TP

DDNS, NAT, Firewall Yes

Extra Commands through SMS

Temperature / Humidity -25°C ~ 70°C / 5 %Ur ~ 95 %Ur not condensing

Protection Metal box - IP 30

Weight 490 gr

Power Supply 1 2 ~ 48 VDC - industrial terminal block

ESD EN61 000-4-2, level 4

Overvoltage Protection EN61 000-4-5, level 3

EFT EN61 000-4-4, level 4

RF EN61 000-4-3, level 3

RC EN61 000-4-6, level 3

Oscil latory Wav Immunity EN61 000-4-1 2, level 3

Magnetic Field Immunity EN61 000-4-8, level 5

Shock / Fall / Vibrations IEC60068-2-27 / 2-32 / 2-6

Electric Resistance DC 500V

Auto Recovery Hardware Watchdog, auto recovery PPP link

MTBF 3G: 284399 hours - 2.5G: 3511 23 hours


Industrial Design

• DIN bar mount

• Wide temperature working range: -20 ~

70°C

• Power Supply: 1 2 ~ 48 VDC, industrial

terminal block

• EMI Immunity

Advanced Features

• VPN: IPSec, PPTP, L2TP, GRE, SSL,

OpenVPN

• RS232/RS485 Serial port

• Industrial Protocol support: Modbus,

Virtual COM, . . .



Speed and Reilability

• GSM / GPRS Connection

• Processor 200 MIPS ARM9, 1 6 Mbytes

SDRAM





INDUSTRIAL GPRS ROUTERIR791GS55 / IR794GS55


New generation GPRS router with advanced features. Allows to connect to remote units not reached

by ADSL, through fast internet connection offered by mobile cel lular operators. Connection can be

opened by SMS or call . Works in extremely hard temperature conditions: -20~70°C. Support for VPN

and OpenVPN connections.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA IR791 GS55 IR794GS55



Serial Interface 1 x RS-232 or 1 x RS-485



WAN Interfaces GSM / GPRS

UMTS / HSDPA not supported

GSM / GPRS 850 / 900 / 1 800 / 1 900 Mhz


SIM Card 3V, fl ip SIM card, Anti-dismantlement

Supported VPN OpenVPN, IPSec, GRE, PPTP, L2TP



Temperature / Humidity -25°C ~ 70°C / 5 %Ur ~ 95 %Ur not condensing


Weight 490 gr

Power Supply 1 2 ~ 48 VDC - Industrial terminal block


Overvoltage Protection EN61 000-4-5, level 3


RF EN61 000-4-3, level 3

RC EN61 000-4-6, level 3

Oscil latory Wav Immunity EN61 000-4-1 2, level 3





MTBF 2.5G: 3511 23 hours


Industrial Design

• DIN bar mount

• Wide temperature working range: -1 0 ~

55°C

• Power Supply: 5 ~ 26 VDC

• Very low consumption (< 3W)

Advanced Features

• VPN: IPSec, PPTP, L2TP, GRE

• RS232 (DB9) Serial port

• Industrial protocol support: Modbus,

Virtual COM, . . .



Speed and Reliability

• UMTS/HSUPA/HSDPA Connection





INDUSTRIAL HSUPA ROUTERIR611WH01 / IR61 5WH01


New generation entry-level HSUPA router with advanced features and cost effectiveness. Allows to

connect to remote units not reached by ADSL, through fast internet connection offered by mobile

cel lular operators. Connection can be opened by SMS or call . Works in extremely hard temperature

conditions: -20~70°C. Support for VPN connections.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA IR611WH01 IR61 5WH01



Serial Interface 1 x RS-232




UMTS / HSDPA 850 / 900 / 1 800 / 1 900 / 21 00 Mhz

GSM / GPRS 850 / 900 / 1 800 / 1 900 Mhz


SIM Card 3V, fl ip SIM card

Supported VPN IPSec, GRE, PPTP, L2TP



Temperature / Humidity -1 0°C ~ 55°C / 5 %Ur ~ 95 %Ur not condensing


Weight 490 gr

Power Supply 5 ~ 26 VDC - Jack

Wifi n.d. 802.11 b/g/n - WPA / WPA2


Electric Resistence DC 500V


n.d.

5 ~ 26 VDC - terminal block


Advanced Equipment

• Two 3G / UMTS antennas to increase

the signal strengh, with wire 2 mt long

• Two Wifi antennas to extend coverage

• External power supply

• Aluminium metal box

Advanced Features

• VPN: IPSec, PPTP, OpenVPN

• Wifi 54Mbps 802.11 b/g

• Advanced protection WPA/WPA2


Speed and Reliability

• Proc. 400MIPS ARM9, 1 28Mbits RAM

• 3G / EDGE / GPRS Connection

• Speed: up to 7,2 Mbps downlink and

5,76 Mbps uplink





UMTS / HSDPA / WIFI ROUTERTTK-RUT1 04

High Speed cellular router ideal for camera streaming andremote control.

TTK-RUT1 04 offers Internet access to PC or PLC networks, without traditional telephone line. I t

works immediately without any software instal led on PC and allows you remotely access your plant

from anywhere.

Ideal solution to overcome digital divide problem and bring high-speed internet connection in places

not covered by ADSL signal.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA TTK-RUT1 04

LAN Interfaces 1 x RJ45, 1 0/1 00 Mbps


Serial Interface n.d.



UMTS / HSDPA 850/900/1 800/1 900/21 00 Mhz

GSM / GPRS 850 / 900 / 1 800 / 1 900 Mhz


SIM Card 3V, slot in

Supported VPN IPSec, GRE, PPTP, OpenVPN

DDNS, NAT, Firewall Si

Extra 2 UMTS ant. + 2 Wifi ant.

Temperature / Humidity 0 ~ 55°C / 5 ~ 95 %Ur n.c.


Weight 280 gr

Power Supply 9 ~ 21 VDC - Jack

Wifi 802.1 1 b/g - WPA / WPA2

Auto Recovery Auto Recovey PPP link


Features

• Dual Band (900 / 1 800 MHz)

• Relay output max 7A

• Analog input 0~1 0V or 4~20mA

• Control through SMS

• External Antenna with extension

Advanced Features

• Query status and configuration through

SMS or WEB

• Configurable logics upon inputs stauts

variation or on SMS arrival

• Status and alarms notification via SMS

or email


Applications

• Security Systems

• Fire Allarms Systems

• Surveil lance Systems

• House and garden automations

• Heating, cooling and lights control

• Remote devices control and monitoring


WIRELESS CONTROL UNITTTK-TWCT22

Remote monitoring device through GSM network with SMSsend feature in case of al larm.

The device is configurable through serial interface as well as through web interface, accessible as

soon as TWCT22 connect to internet. Confiugration al lows to define a behaviour for digital output

when some conditions occurred, l ike an allarm or coded SMS arrival. Connection to internet al lows

also to send email as wwell as SMS. A complete and affordable product!

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA TTK-TWCT22

Dual Band 900 / 1 800 MHz

GPRS Class 1 0 U: 1 6-24 kbps / D: 32-48 kbps

SMS Text Mode

GSM Module Teltonika TM1

Serial Interface RS-232, Socket: RJ45

wire provided in box

Alarms Send SMS / Email

Supported Protocols HTTP, SMTP

Digital Inputs 4 (0-3V: off - 3-24V: on)

Analog Inputs 2 (0~1 0V o 4~20mA)

Digital Outputs 4 Relay (max 7A)

Signal Leds 4x Din, 4x Dout, 2x Status

Extra 1 antenna (MMCX) + 2mt wire

Temperature / Humidity -20 ~ 55°C / 5 ~ 95 %Ur n.c.

Protection Plastic box - IP 30

Mounting DIN bar

Power Supply 1 2 ~ 24 VDC - terminal block


Software Features

• Linux OS

• Administration WEB interface

• Configuration and monitor WEB

interface

• Send report and alarms via mail

• Data sampling on MySQL database,

remotely accessible

Hardware Features

• Vortex86MX 1Ghz Processor

• RAM Onboard 51 2 Mb DDR2

• 1 0/1 00 Mbps Ethernet Port

• 2x Serial RS-232 / RS-485 Ports

• HD: 1 6Gb SD / SSD

• Fanless

• Based on Open Source software

Supported Protocols

• Modbus RTU / TCP / ASCII

• BACnet IP

• DNP3 IP

• 1 -wire

• SNMP

• SQL

• . . . and even more . . .


UNIVERSAL DATALOGGERMC-LOG2 / MC-LOG3

Cheap solution to monitor and sampling values from plantdevices and monitor them throught web interface!

Marcom datalogger is the right solution to monitor data from multiple devices with different protocols

in an easy and fast way. The datalogger al lows you to set the sampling interval, generate reports and

alerts, notify via email specific users or groups of users based on temporal conditions. Each user has

an access level and can have different access to different pages and views. A complete and

affordable solution!

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA MC-LOG2 MC-LOG3

Processor Vortex86MX 1 000 MHz

RAM 51 2 Mb DDR2

Hard Disk SD Card: 1 6 Gb

Ethernet Ports 1 x 1 0/1 00 Mbps Auto-sensing

Serial Ports 2x RS-232 / RS-485 (opzionali)

Other Ports 3x USB, 1 x VGA (non uti l izzate)

Configuration Interface WEB (TCP80: datalogger - TCP1 0000: administration)

HTTP Port TCP 80

HTTPS Port TCP 1 0000

SSH Port 22 (only administration)

MySQL Port TCP 3306

FTP Port TCP 21

Dimensions 11 5 x 11 5 x 35,4 mm

Temperature / Humidity 5 ~ 50°C / 5 ~ 95 %Ur n.c.

Protection Metal case - IP 30

Mounting VESA - mounting screw included

Power Supply 8 ~ 1 5 VDC - Jack

Available Services

SSD SATA: 1 6Gb


Features

• Modem VDSL2-Standard

• Switch 4 Eth ports 1 0/1 00Mbps

• 2x RJ11 to connect telephone / l ine

• Automatic speed for VDSL port

• Configuration through WEB or RS-232C

• PPPoE support

• Integrated firewall , NAT/DMZ support

Features

• Integrated DHCP Server

• Low consumption (ca 7,5W)

• Support for future VDSL technologies

• Upgradable firmware

• Diagnostic alerts to improved

connection quality

Possible Applications

• Link between far facil ities

• Data acquisition from solar plant

• Data acquisition from wind plant

• Link between pump stations on

mountains


MODEM SWITCH VDSL2INT-ETHPP

VDSL-Ethernet modem couple. Ideal soution to connectEthernet devices far more than 1 00 meters.

VDSL modem to point-to-point l ink over two-wires with speed up to 1 00 Mbit/s. Up to 5000 meters at

1 2,5 Mbit/s. Supports telephone or ISDN lines together with Ethernet l ine. Each modem works also

as Ethernet switch with 4 ports. Configurable through web interface or with RS232C console port.

Diagnostic functions on two-wires l ink, to diagnose link status.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA INT-ETHPP

Standard VDSL-2 Standard

Maximum Speed 1 00 Mbps

Maximum Distance 5000 mt @ 1 2,5 Mbps

Ethernet Ports 4x RJ45 - 1 0/1 00 Mbps

Ethernet functions Switch o Router

Other Ports 1 x RJ11 for data l ines

1 x RJ11 for telephone line

Firewall , NAT, DMZ Yes

VDSL techniques Infineon up to 1 00Mbps/sym

Signal LED 4x Eth, 1 x l ine status, 1 x Pwr

Pieces on box 2pz: 1 x Master + 1 x Slave

Temperature / Humidity -1 0 ~ 55°C / 5 ~ 95 %Ur n.c.

Protection Plastic box - IP 30

Mounting Desktop or wall mounting

Max Consumption 7,5W


Features

• High speed embedded processor

• High rel iabi l ity for 24h links

• Granted auto-reconnection

• High speed and rel iable data

trasmission

• Very small death-times

• RS-232 or RS-485 (optional)

• Remotely configurable

Main Features

• Different working modes

• Connection start from local request,

upon call or scheduled

• Multi-connection support

• Hardware Watchdog and heartbeat PPP

mechanism


• Auto send datas from serial device to a

central server

• Monitor and configuration of remote

devices


GPRS REMOTE SERIALGPRS-SER1

RS232 / RS485 remote serial with integrated GPRS modem formonitor and control of serial devices.

GPRS-SER1 serial devices are developed to transmit serial datas over GSM/GPRS mobile networks.

Modem are light compact and designed with advanced features for high performance, max security

and low power consumption. Device is based on industrial chip able to work on extreme external

conditions: temperature working range from -25 to 70°C, wide power input range from 5V to 35V and

EMC immunity.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA GPRS-SER1

Serial Interface RS-232 / RS-485 (optional)

ESD Protection 1 5kV

Serial Protocols Transparent TCP, Virtual COM

WAN Interface GSM / GPRS

GSM / GPRS 850 / 900 / 1 800 / 1 900 MHz

SIM Card 3V, fl ip card, anti-dismantlement

Humidity 5%Ur ~ 95 %Ur n.c.

Protection Plastic box, IP30

Weight 1 20 gr

Power Supply 5 ~ 30 VDC

Max consumption 1 2mA ~ 1 00mA@ 1 2V


Overvoltage protection EN61 000-4-5, level 3


RF, RC EN61 000-4-3, level 4

Oscil latory Wave Immunity EN61 000-4-5, level 3

Temperature -25~70°C


Configuration Serial or remote

Shock / Fall / Vibrations IEC60068-2-27/ 2-32/ 2-6


Auto recovery Watchdog Hardware and PPP


Features

• Multi-band (800 Mhz ~ 21 00 Mhz)

• High rel iabi l ity for 24h links

• Standard SMA-male connector for

connection to different devices

• Reliable signal transmission

• Shielded and low-loss wire

• Directional with higher gain or

omnidirectional to cover a wide area

• Wall or rod mounting

• External conditions resistance


• Acquire signal from a higher covered

area

• Extend signal coverage


UMTS / GPRS ROUTER ANTENNASANT-2 / ANT-7 / ANT-9

GPRS / UMTS / HSDPA router signal extender antennas

Antennas allow to extend router signal coverage. They are used in cases normal antenna shipped

with router isn't sufficient for various reasons: router instal led in a basement, difficulty reached by

GSM signal, or because router is instal led in an area weakly covered by signal. Antennas are shipped

with low-loss and shielded cable.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA ANT-2 ANT-7 ANT-9

Tipology Dipole Array Multi Band Dipole Array Log Periodic Dipole Array

Gain 9 dBi 11 ,1 dBi

Frequencies 1 900 / 21 00 Mhz 1 700 - 2500 MHz

Vertical Specter Wide 32° 46°

Horizontal Specter Wide 25° 58°

Impedance 50 Ohm

Dimensions 600 x 80 x 80 mm 345 x 1 35 x 73 mm

Weight 530 gr 350 gr 350 gr

Polarizzation Linear Vertical

Mounting Rod Rod or wall

Wire 1 0 mt

Suitable for GPRS / UMTS / HSDPA UMTS / HSDPA

Connector Type SMA-male

900 / 1 800 / 1 920 / 21 70 Mhz

360°

5dbi per GSM / 6dbi per UMTS

335 x 1 66 x 1 44 mm

5 mt

GPRS / UMTS / HDSPA / WiFi

0°


Features

• High reception with external high gain

antenna

• Low-loss cable 1 0mt length

• Up to 1 0 simultaneous channels

• Fast and rel iable data trasmission

• No configuration needed

Additional Features

• Extreme temperatures conditions: -25°C

~ +50°C

• Wide coverage area: up to 600mq

• Compact and small for an easy

instal lation

In the box

• Signal regenerator GSM / GPRS /

UMTS (depending on the model)

• External directive antenna

• Internal omnidirectional antenna

• 1 0 mt cable for external antenna


GSM / UMTS SIGNAL REGENERATORSAMPLI-901 HP / AMPLI-921 HP / AMPLI-K3G

Signal regenerators to take GSM signal inside the building andviceversa.

The signal of the RF field of mobile phones is very good in open space and normally average to good

quality in the vicinity of the openings to the outside (windows, doors, balconies, windows), but bad

inside the building, so that the signal strength may decrease to let the service be unusable. The

bidirectional signal regenerators AMP series is the solution to implement the connection of mobile

phones in buildings lacking in coverage.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA AMPLI-901 HP AMPLI-921 HP AMPLI-K3G

Frequencies GSM 900 MHz UMTS / 3G / GMS 900MHz UMTS / 3G

Coverage (open field) 600 mq 80 mq

Simultaneous connections 1 0

Impedance 50 Ohm

Power Supply 11 0 / 220 VAC

Temperature -25 °C ~ 50 °C

Supported Technologies GPRS / EDGE HSDPA / HSUPA / EDGE

Dimensions 270 x 21 0 x 50 mm 370 x 21 0 x 50 mm 1 40 x 80 x 30 mm

500 mq


Features

• Easy to configure and use

• Long life battery

• GPS receiver up to 65 channels

• GSM Dual Band module

• Configuration by SMS

• Online tracking

• Personal security alarm

Other Features

• Geo Fence function

• Realtime localization through internet

• Working mode: Sleep, Logging and

Alarm

• Notification low battery by SMS

• Parking function

Ideal for ...

• Location and security of children

• Companies that offers security services

• Services companies (employes

tracking)

• Hospitals and nursing homes

• Location and security of elderly alone


GSM / GPS PERSONAL TRACKERSTTK-MH2000 / TTK-GH1 202 / TTK-GH3000

PERSONAL TRACKING - l ight with GPS and GSMconnectivity, for personal local ization and tracking.

The portable Teltonika locator is a device with GSM and GPS connectivity, which is able to detect the

coordinates and send them via the GSM network. There is no instal lation required. The device is

perfectly suited to applications where it is necessary to locate remote parties and property to which it

is necessary to ensure safety. Small size, long l ifetime, mobil ity and universal device configuration.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA TTK-MH2000 TTK-GH1 202 TTK-GH3000

GPS Receiver -1 61 dBm / 65 channels SiRF Star I I I 20 channels -1 60dBm, 50 channels

External GPS Antenna Yes n.d.

GSM Module

Button number

Button 1 Function

Button 2 Function On / Off Call / End

Button 3 Function

Button 4 Function n.d. Volume -

Status LED Battery / GSM / GPS - Alarm

Battery Li-Ion 1 050 mAh

Battery Life 24 coord/day: 1 50 hours 1 440 coord/day: 26 hours

Vibration n.d. Yes n.d.

Calls n.d. Yes

"Man Down" Function n.d. Yes

"Geo-Fence" Function n.d. Yes

"Silent Call" Function n.d. Yes

Button 5 Function n.d. Alarm / Confirm Alarm / Confirrm

Speaker n.d. Yes

Weight 80 gr 80 gr80 gr

Internal Memory Up to 24 coordinates 1 Mb

Dimensions 92 x 44 x 1 8 mm 92 x 44 x 1 8 mm

n.d.

n.d.

92 x 44 x 1 8 mm

Call / End

Volume -

1 440 coord/day: 26 hours

Yes

n.d.

Yes

1 Mb

850 / 900 / 1 800 / 1 900 MHz

2 55

Alarm Call / AnswerCall / Answer

n.d. Volume +Volume +


Features

• Level converter up to 20 meters

• DIN bar mounting

• Complies standard EN1 434-3

• Indipendent M-Bus display

• Integrated data fi lter

• Firmware upgradable

• Settable baudrate for each meter from

300 to 9600 bps

• shortcircuit secuirity

• Settable sampling interval

• Memory up to 4Mb

• Syncronous data read from display

• Hystorical data in CSV format

In the box

• Datalogger C3 or C20 device

• Instruction manual

• Free software for data download

(optional)


DATALOGGER MASTER FAMILY C3 / C20RELAY-MR005DL / RELAY-MR006DL

Datalogger + display solution: affordable and compact tomonitor up to 20 M-Bus meters.

C3 / C20 - the perfect master for small instal lations of M-Bus devices. The members of the family

C3/C20 systems are ideal for M-Bus instal lations from 3 to 20 meters. All devices have a serial port

RS-232 interface for remote meter reading from a PC software. Additional ly, the devices also operate

in stand-alone, thanks to the integrated LCD display and keyboard. The version of "logger" is also

able to save the meters' data automatical ly.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA RELAY-MR005DL RELAY-MR006DL

Max meters 3 20

Max M-Bus current 4,5 mA

M-Bus voltage

Overcurrent threshold

Power supply

Internal bus resistance

Transmission speed

Protection IP 40

Buttons number 4

Display LCD - 2 lines and 1 6 columns backlight

M-Bus interfaces 3 - industrial screw

Serial interfaces 2x RS-232 - DB9 connector

Data memory Up to 4000 telegrams

Values memory up to 4Mb (optional)

Dimensions 58 x 1 06 x 96 mm

30 mA

32 V

60 mA

1 0~28 VDC (5W) - 1 3~27 VAC (9W)

1 00 Ohm

300 ~ 9600 Baud


Features

• Modbus TCP to Modbus RTU / ASCII

converter

• 1 Ethernet port and 1 serial port

• Up to 1 6 simultaneous master TCP

• Up to 32 requests per master

• Easy hardware and software

configuration

• Baudrate from 50 to 921 .6 kbps

• Configuration software for Microsoft

Windows

In the box

• 1 x MGate MB31 80

• 220VAC power supply

• CD with documentation and software

• Instal lation guide


MODBUS TCP / RTU CONVERTERMOXA-MB31 80

Standard Modbus gateway to convert between Modbus TCPand Modbus RTU/ASCII .

MB31 80 device is a Modbus standard gateway to convert between protocoll i Modbus TCP and

Modbus RTU/ASCII . I t supports up to 1 6 master Modbus TCP simultaneous, with up to 31 slave

RTU/ASCII per serial port. With this device serial Modbus slaves can be included in an existing

Modbus TCP network, and Modbus TCP slaves can be accessed by serial masters.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA MOXA-MB31 80

Serial ports 1 x RS-232 / RS-422 / RS-485 (DB9 male connector)

Ethernet ports 1 x 1 0/1 00 Mbps

Serial Protection ESD 1 .5 kV

Ethernet Protection

RS-232 signals

RS-422 signals

RS-485 signals Data+, Data-, GND

Operation modes RTU Slave, RTU Master, ASCI I Slave, ASCI I Master

Multi-master Up to 32 TCP slave

Multi-drop Up to 1 6 TCP master (max requests: 32 for each master)

Power supply 1 2 ~ 48VDC (jack) - max 200 mA

Temperature 0 ~ 55°C

Humidity 5 ~ 95% (not condensing)

Dimensions 22 x 52 x 80 mm

Protection IP 30

Insulation protection 1 .5 kV

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

Tx+, Tx-, Rx+, Rx-, GND


Features

• Serial server with 1 RS-232 / RS-422 /

RS-485 port (depending on the model)

• Small size for an easy instal lation

• Real COM/TTY driver for Microsoft

Windows and Linux

• TCP/IP Standard interface vaersati le

operation modes

• Configuration Uti l ity for Windows easy

and with multi-device support

• Protection on interfaces

• SNMP MIB-I I

• Configurable by Telnet and web

In the box

• 1 x NPort 51 00

• CD with documentation and software

• Instal lation guide


NPORT ETHERNET SERIAL SERVERMOXA-NP511 0 / MOXA-NP51 30

NPort 511 0 and 51 30 servers are designed to make serialdevices network-ready.

NPort 51 00 devices are designed to make serial devices network-ready. Small size of servers makes

them perfect to connect them to card readers and payment terminals. NPort 51 00 serial devices

allows to use old serial software designed to communicate over COM/TTY ports. They allow serial

devices and PC to communicate each other over TCP/IP network.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA MOXA-NP511 0 MOXA-NP51 30

Serial ports 1 x RS-232 (DB9 male) 1 x RS-422/485 (DB9 male)


Serial protection ESD 1 .5 kV

Ethernet protection

RS-232 signals TxD, RxD, RTS, CTS,DTR,

DSR, DCD, GND

RS-422 signals

RS-485 signals n.d.

Configuration interfaces Web, Telnet, Seriale, Software Windows

Power supply 1 2 ~ 48VDC (jack)

Temperature 0 ~ 55°C

Humidity 5 ~ 95% (not condensing)


Protection IP30

n.d.

Data+, Data-, GND

Insulation protection 1 .5 kV

n.d. Tx+, Tx-, Rx+, Rx-, GND


Features

• Configuration through web interface

• Read DLMS data through RS232 port,

RS485 port or optical probe

• Fixed variable map for each type of

meter

• 2 digital input and 2 digital output on

MODBUS area

Main Features

• 2 serial ports RS232 for direct access to

meters by optical probe

• MODBUS communication: holding

register on RS485 line or Ethernet port

• DIN bar mouting

• Unique DLMS meters read over RS485

line using meter serial number

• Error codes for diagnostic meter

communication manage

• SCADA software available for bundle

pack


DLMS-MODBUS GATEWAYGW-DLMS

Transport datas from DLMS protocol (IEC 62056) to MODBUSTCP or MODBUS RTU

Gateway fast data read from DLMS protocol enabled energy meters. Instantaneous conversion of

reads to Modbus TCP or RTU. Available for main enegy meters on market (Landis+ Gyr, Iskra,

Actaris, I tron, EMH.. . . ). DLMS protocol (Device Language Message Specification) is used in energy

meters field and in particular to read energy meters working data. Reference standard is IEC 62056.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA

Link / Connection 2 x RS232 serial ports to connect to meters

1 x RS485 serial port as MODBUS slave RTU

1 x ethernet port as MODBUS TCP Server

Configuration Configuration trhrough Web interface

Possibi l ity to modify gateway IP address and

set connected meters serial numbers

Power supply 1 0~30 VDC

Mouting DIN bar

Dimensions 22,5 x 1 01 x 11 9 mm

Input / Output

GW-DLMS-485-LG 4 Landis meters on RS485, MODBUS TCP and MODBUS RTU RS232

GW-DLMS-232-LG

GW-DLMS-OPT-LG

GW-DLMS-OPT-SL7

GW-DLMS-OPT-ISK

M-OPPR-232

M-HMISYS

2 digital input and 2 digital output on MODBUS area

2 Landis meters on RS232, MODBUS TCP and MODBUS RTU RS485

2 Landis meters using optical probes, MODBUS TCP and MODBUS RTU RS485

2 SL7000 meters using optical probes, MODBUS TCP and MODBUS RTU RS485

Optical probe for meters with protocol IEC 62056-21 (former IEC 11 07)

SCADA software pack (Istantaneous values, Trend, Alarms, Reports)

2 ISKRA meters using optical probes, MODBUS TCP and MODBUS RTU RS485

PRODUCT CODES

ACCESSORIES

GW-DLMS


Features

• Preconfigured SCADA system for

energy meters data acquiring and

sampling

• Data read though ethernet DLMS

gateway

• Graphical pages for view istantaneous

values

• Graphical pages also on web interface

• Different users with different access

level

• Save datas on CSV file with meter date

and time

• Automatical save at midnight and

possibi l ity of manual save

• Alarms on voltage thresholds

• Compatible with Microsoft Windows OS

32 bit and 64 bit

• Cheap with USB licence key

• Different size depending on number of

meters to be read

• Personalized with your Company logo


ENERGY METERS SCADAM-HMISYS1 / M-HMISYS2 / M-HMISYS3

SCADA system for energy meters. Visualization ofinstantaneous values and data save at the end of day.

The supervision system has been designed to meet the needs of producers of energy from

photovoltaic, wind, biomass, . . . The system can track the status of energy meters and sampling the

main parameters (Total energy production / total energy consumption) at the end of the day. The

system is completely autonomous, interrogates the meters and generates a fi le with the values

obtained directly from the meter. Expandable with other devices and protocols.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA

Number of meters read from 4 to 1 2 DLMS meters even of different manufacturers

Acquired tags Serial Code (0.0.0), Time (0.9.1 ), Date (0.9.2), Total Energy A+ (1 .8.0), Total Energy A- (2.8.0)

Prev. Total Energy A+ (1 .8.0*), Prev. Total Energy A- (2.8.0*), Reset Counter (0.1 .0)

Phase 1 Deficiencies (C.7.1 ), Phase 2 (C.7.2), Phase 3 (C.7.3)

Phase 1 Overvoltage (32.7.1 ), Phase 2 (32.7.2), Phase 3 (32.7.3)

Phase 1 actual value (32.7.0), Phase 2 (52.7.0), Phase 3 (72.7.0)

Tags saved on fi le Serial Code (0.0.0), Time (0.9.1 ), Date (0.9.2), Total Energy A+ (1 .8.0), Total Energy A- (2.8.0)

Saving interval Every day at midnight

Max number of sampling Depending on the size of the disk of the PC where the software is instal led

Other features

M-HMISYS1 Monitor up to 4 meters with datas visual ization and energy sampling

M-HMISYS2

M-HMISYS3

Monitor up to 8 meters with datas visual ization and energy sampling

Monitor up to 1 2 meters with datas visual ization and energy sampling

PRODUCT CODES

More datas Monitoring from 2 to 4 digital inputs, command from 2 to 4 digital outputs

M-OPPR-232

GW-DLMS

Saving the values manually in addition to saving automatic

Optical probe for monitor meters with protocol IEC 62056-21 (former IEC 11 07)

DLMS-Modbus gateway for meters monitor

ACCESSORIES


Features

• Compact device for energy meters

monitor

• Compatible with al l manufacturers and

models with optical pulse

• Easy to instal l

• No configuration needed

Some meters supported

• ISKRA

• LANDIS + GYR

• ACTARIS SL7000

• GET2A / GET3A / GET4S

• GIST

• GISS

• . . . and even more . . .


ENERGY METER PHOTORECEIVERFR-OPT1

Device for detecting the amount of energy produced and / orconsumed, accounted by meters with optical output pulse.

This device is able to detect the amount of energy produced / consumed accounted by a meter with

an optical output (LED red or yellow). The photoreceiver converts the l ight signals of active energy,

emitted by the LED on the counter, in open collector pulses, which once obtained allow to monitor the

energy consumption of a plant. The accuracy of the measurement carried out is guaranteed by the

fact that the device picks up the measure directly from the LED used as a reference for the

metrological cal ibration of the meter.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA FR-OPT1

Dimensions Module: 39 x 78 x 23 mm

Photoreceiver: 22 x 1 4 x 1 2 mm

Weight

Box material

Protection

Temperature

Humidity 95% not condensing

Other Charateristics External probe with photodiode, cable L=50cm

Power supply 1 2 ~ 24VDC

Consumption 33 mW / 2,8mA

Visual feedback 1 LED, flash with received pulse

Output Open collector: Vmax = 28VDC; Imax = 1 00mA

Pulse lenght from 50 to 1 00 mSec

30 gr.

Plastic

IP20

-20° ~ +70°C


Features

• Unmanaged industrial switch

• Developed to ensure rel iabi l ity

• Developed to be industrial

• Al luminium box, protection IP 40

• Equipped with terminal blocks with relay

contacts

• Protection against faults

Main Features

• From 5 to 8 Ethernet ports 1 0/1 00Mbps

• Supply voltage: 9~50VDC

• Overvoltage protection, Polarity

inversion protection, EMC

• Wide temperature range: -40~75°C

• Reduced latency: 4 uS

• Relay for fault signal

• IEEE802.3 / 802.3u / 802.3x - flow

control

• Data exchange: package store &

forward

• Ethernet ports 1 0/1 00Mbps Full/Half-

duplex MDI/MDI-X adaptive

• IEEE 802.1 x enhanced user auth.

• VLAN IEEE802.1 q support


ENTRY-LEVEL INDUSTRIAL SWITCHIH-ISE2005D / IH-ISE2008D

Entry-level switch for industrial applications. Redundant powersupply, very fast access times and high rel iabi l ity.

Entry-level switch with industrial characteristics. Allows you to create rel iable network infrastructure

with redundant power supply, surge protectors and external influences electromagnetic EMC, the

wide temperature range in which it can work. The switches industrial also have high performance in

the management of data: a very low latency (4 uSec) and an internal bandwidth of 1 Gbps allow a

package management very fast, which is indispensable in the case of use of the devices for the

creation of networks with constraints on the communication speed (eg Profinet)

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA IH-ISE2005D IH-ISE2008D

Ethernet ports 5 x 1 0/1 00 Mbps 8 x 1 0/1 00 Mbps

Console port 1 x RS-232 (RJ45 connector)

Diagnostic LED

Digital I /O 2 x fault signals relay

Power supply

Power connector

Reverse polarity protection

Max consumption 5 W @ 9 VDC

DIP siwtches Enabled relay outputs

Dimensions 45 x 1 33 x 11 3 mm

Weight

Box Metal - protection IP 40

DIN bar mount Yes

Temperature -40 °C ~ +85 °C

Humidity 5 % ~ 95 % not condensing

Switching latency 4 uSec @ 1 00 Mbps

Switching band 1 Gbps

Frame Buffer memory 1 Mbit

Table size 8 k

1 .6 Gbps

4 uSec @ 1 00 Mbps

8 k

1 Mbit

Overvoltage protection

9 ~ 50 VDC

Present

600 gr

PWR1 , PWR2, FAULT

7 x industrial terminal block

Present


Features

• Connection to Meterbus devices

• Integrated Meterbus interface with 4 or

6 paral lel terminal blocks

• Available in different sizes: 5, 20, 60 or

1 20 meters

• Configurable by Ethernet port

• Different working modes

M801 Main Features

• Ethernet port 1 0/1 00 Mbit

• Connection mode: TCP or UDP

• Fixed IP address or DHCP

• Working mode: remote serial (with free

software), transparent.

• Console port for debug and

configuration

M900 Main Features


• Up to 4 TCP/UDP clients

• 6 couple of Mbus terminal blocks

• RS232 and RS485 terminal blocks (for

Modbus slave working mode)

• 2x digital input e 1 x relay output

• Configuration from web interface


METERBUS ETHERNET GATEWAYGT-MTBS / GT2-MTBS

Series of gateways / converters designed for remote reading ofM-Bus devices over the LAN or Internet.

The gateway M81 0 is designed to read transparently al l types of M-Bus standard devices using

Ethernet TCP or UDP connection. The gateway translates the electrical signals of M-Bus to Ethernet.

The M-Bus messages are read from standard software eg SCADA system, remote reading programs,

configuration programs, databases, etc. .

The gateway M900, integrate al l the features of the M81 0, has been designed to keep data read from

the meters in memory areas accessible by Modbus RTU or TCP protocol.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA GT-MTBS GT2-MTBS


n.d.Console port 1 x RS-232 (RJ11 connector)

Disgnostic LED

Digital I /O 2x IN Digital i , 1 x OUT Relay

Power supply

Power supply connector

Max consumption 350 mA for 60 meters


Weight

Box Metal - protection IP 20

DIN bar mounting Yes


Humidity 5 % ~ 95 % not condensing

M-Bus comunication 300 ~ 9600 kbps

M-Bus interfaces 4 paral lel

Other interfaces n.d.

Max meters up to 1 20 meters

6 paral lel

1 x RS232, 1 x RS485

Max 20 meters GT-MTBS20

Max 60 meters GT-MTBS60

Max 1 20 meters n.d.

GT2-MTBS020-2 / 4

GT2-MTBS060-2 / 4

GT2-MTBS1 20-2 / 4

2: 2 TCP clients

4: 4 TCP clients

Supported protocols Meterbus

Max 5 meters GT-MTBS05 GT2-MTBS005-2 / 4

Meterbus, Modbus RTU / TCP

24 VDC / VAC

200 gr

industrial terminal block

Pwr, C1 /2/3, P1 /2/3/4, MbusPWR, Tx, Rx

n.d.

400 gr

1 08 x 90 x 62 mm

PRODUCT CODES


Features

• Integrated webserver

• Web HMI

• Modbus/TCP and Modbus/UDP protocol

• Web interface with password

• Double Watchdog

• Extended temperature range


• Included input and output terminals

• 8x digital inputs with 32 bit high

frequency counter

• 8x digital outputs Open Collector

• Power supply: 1 0 ~ 30 VDC industrial

terminal block

• Overvoltage protection on inputs

• Overcurrent protection on outputs

• OVervoltage protection on inputs

• Short circuit protection

• Outputs safe status


MODBUS TCP/IP PULSE COUNTER FORENERGY METERSEM-8DI8DOLow-cost device for pulses accounting from energy meters dry-contacts.

The device allows you to quickly and easily account the number of state changes from open to closed

of a dry contact. The system is ideal for sampling and saving the number of pulses produced by relay

or transistor outputs present on the energy meters. These meters are usually instal led on photovoltaic

systems, biomass, wind, etc. . and are usually without a communication protocol. In these cases it is

necessary to go to monitor the amount of energy exchanged, by the pulses generated from the digital

outputs of the counter. The data thus collected wil l be made available in Modbus TCP memory areas.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA EM-8DI8DO

Ethernet Ports 1 x 1 0/1 00 Mbps

Diagnostic LEDs Pwr, Eth Link/Act, Eth 1 0/1 00 Speed

Digital Inputs

Digital Outputs

Power On Value

Security State

Shortcircuit protection

Overload protection Yes, 1 .1 A

Power Supply

Box Plastic - protection IP 20

DIN bar mount Yes


Humidity 1 0 % ~ 90 % not condensing

1 0 ~ 30 VDC - max. 2.4 W

Digital Inputs Counters

Max value 32 bit: 4,294,967,285

Min pulse duration 1 ms

Max Frequency 500 Hz

Supported functions 01 (Read Output Coil), 05 / 1 5 (Write Output Coil)

02 (Read Discrete Input), 04 (Read Input Register)

03 (Read Holding Register), 06 / 1 6 (Write Holding Register)

Direct outputs command Yes

Registers preset Yes, counters starting values

Supported Protocols Modbus TCP/IP and Modbus UDP/IP

Digital Ouputs Functions

Yes

Yes

8x Dry contacts (Sink, Source) 1 0 ~ 50 VDC

8x Open Collector isolate, max 300mA

Yes


Industrial Design

• DIN rail mount

• Wide temperature range: -25 ~ 55°C

• Power supply: 1 0 ~ 60 VDC, industrial

terminal blocks

• EMI Immunity

Advanced Features

• ADSL Multi-protocol support : ADSL,

ADSL2 e ADSL2+

• Power supply from terminal blocks or

POE

• Lowest consumption: < 6W



INDUSTRIAL ADSL MODEM ROUTERM-DSLWTM-HS

New generation industrial ADSL2+ router developed for use inextreme temperature conditions.

The modem router DSLWTM-M-HS is unique and allows you to use the ADSL connection in extreme

conditions, where the normal commercial router cannot work. The router has 1 ethernet port to which

to connect your device that require broadband connectivity, or a switch to increase the number of

industrial etherent ports and provide connectivity to multiple network devices.

www.marcomweb. it


www.marcomweb. it

TECHNICAL DATA M-DSLWTM-HS

LAN Interfaces 1 x RJ45, 1 0/1 00 Mbps

ADSL Specifics ITU G.992.1 Annex A or Annex B (G.dmt 1 TR11 2 UR2)

DSL transmission type ADSL, ADSL2, ADSL2+

Max Downstream speed Up to 24 Mbps

Max Upstream speed Up to 1 Mbps

Power Supply 1 0. .60 VDC - industrial terminal blocks or PoE

Max consumptions 1 0 W peak - tipical < 6W

Temperature -25°C ~ +55°C

Box metal - protection IP20

Status LED Power, DSL Sync, LAN

Mounting DIN rail mounting


Marcom Products Catalogue - Remote Control - English

Documents

redundant

mobile cellular

reliable data

flip sim card

software installation

advanced features

condensing

energy sampling