MARCO - wischnew/pamela/internal/daq/...353П-46КС-27895-1105 1 Approved Deputy General Designer of TsSKB ___ G. E. Fomin "_"_____ 2003 Materials on electrodiagnostic tests of

353П-46КС-27895-1105 1

Approved

Deputy General

Designer of TsSKB

____________ G. E. Fomin

"___"________ 2003

Materials on electrodiagnostic tests of Pamela for “Resource-DK1” SC

46КС-27895-1105

Leading designer

______________ V.N. Zyabchuk

"___"__________ 2003

Head of department 1107 Head of department 1105

______________ Sh. Z. Dusaev _____________ V.M. Fedorov

"___"__________ 2003. "___"_________ 2003.

Head of department 1402

_______________ Ya. A. Mostovoy

"___"__________ 2003.


_______________ S.A. Kustov

"___"___________ 2003.


_______________ A.S. Kolpachshikov

"___"___________ 2003.

2003

353П-46КС-27895-1105 2

TABLE OF CONTENTS

Introduction………………………..………………………………

1. Indication of safety measures...…………………………………

2. Types of hardware testing …......…………….…………………

3. Tests of the hardware as part of SC ……………………

3.1 Purposes and tasks of the tests.………………………………...

3.2 Tests support .................……………………………………….

3.3 Evaluation of test results ...........……………………………….

3.4 GTE composition …………………………………………………….

4. Test activations of "Pamela" RH with support systems of SC

4.1 Procedure of PAM TA .................……………………………….

4.1.1 Procedure of PAM TA fragment 1 – "RH test"…......................

4.1.2 Procedure of PAM TA fragment 2 – "Technological mode opera-

tion"………………….............................................................…

4.1.3 Procedure of PAM TA fragments 3, 4 – "GS

test"...........................................………………………………………

4.2 Procedure of PAM/HSRL TA.………………………

4.2.1 Procedure of PAM/HSRL TA fragment 5 – "Nominal operation,

standby electronics test"………

4.2.2 Procedure of PAM/HSRL TA fragment 6 – "Test of HSRL communi-

cation channels"......................………………………………………….

5. Joint Operation of Pamela and HSRL .............................................

6. Integrated tests of Pamela ...............................................................

7. Amount of Pamela’s retesting after replacement of its components or

replacement of “Resource DK” SC...............................................

8. Estimation of operating time ……………………………………

9. Order of Pamela’s activation, deactivation and re-set......................………………………………………….…..

Annex 1. List of test programs.

353П-46КС-27895-1105 3

INTRODUCTION

The document on electro-diagnostic testing of "Pamela" RH summarizes

the scope and procedure of electrical testing of "Pamela" RH in article 46КС and is

the initial data for development of documentation on integrated electrical testing of

the article.

The present document was developed according to:

“Materials on "Pamela" RH control logic” (353П-46КС-26166-1105).

LIST OF ACRONYMS

RH – research hardware;

TA – testing activation;

JO – joint operation;

IT – integrated testing;

CD – computer data;

TM – telemetry;

SI – signaling information;

BCS – on-board computer system;

BTCS – on-board time-coordinate synchronizer;

CRPDS – command relay/power distribution system;

GV–global variable

PSS –power supply system;

OBE HSRL – on-board equipment of high speed radio link;

CMS – command measuring system;

BDTS – on-board data telemetry system;

FTD – flight time diagram

User – user (cosmodrome);

GTC – ground testing complex;

353П-46КС-27895-1105 4

TP – technological prototype;

FP – flight prototype;

Terminal – terminal;

PSCU – Pamela storage & control unit;

GSE – ground support equipment;

RM –route marking;

TRD – transmission radiation detector;

MCMD – CC transmitted to the equipment by MCL;

GTE – ground testing equipment.

353П-46КС-27895-1105 5

1. INDICATION OF SAFETY MEASURES

Operation with "Pamela" RH is allowed to persons acquainted with mode

of functioning, structure of the article, operational documentation for the testing

equipment, trained in safety measures and entitled to work with electric facilities

of voltage below 1000 V in a group of 3 minimum and also entitled to work with

high-pressure vessels.

Operating personnel shall be acquainted with and observe the rules and

service instructions for instruments used for operations with the article and

also other rules and instructions in force at the manufacturing plant and at

the user’s.

353П-46КС-27895-1105 6

2. TYPES OF HARDWARE TESTING

At 46КС article (that is “Resource-DK1” SC) manufacturing plant ("Pro-

gress" plant) electrical testing of "Pamela" RH both for technological and flight

prototypes are carried out in the following phases:

- prior installation on the article – incoming test using "Pamela" RH GSE

according to documentation developed in INFN.

- after installation on the article:

1. Test activations with the article’s support systems including:

a) equipment serviceability checkout;

b) test of communications with BCtS, CRPDS, BTMS, BTCS;

c) test of communications with HSRL OBE using technological output of

TDM commutator.

2. Joint operation with HSRL OBE.

3. Integrated testing (IT).

Measurement of interference level and slump of voltage in supply circuits

is carried out for the technological prototype.

The consequence of testing flight prototype of "Pamela" RH at the user’s is

the same.

Diagram of work with technological and flight prototypes of "Pamela" RH

at the “Progress” plant and at the user’s is given in Figure1.

353П-46КС-27895-1105 7

Installation oftechnological prototype inSC PC

TA, JO, IT with technologi-cal prototype (2 cycles)

Activities on measuringmagnetic fields levels

Testing at the "Progress" plant

Incoming test oftechnological pro-totype

Incoming test of flightprototype

Dismounting oftechnological prototype

Instal. of flightprototype intoSC PC

TA, JO, IT with flight prototype (2 cycles)

Dismantling of flight prototype

Testing at the "Progress" plant

Instal. of flightprototype intoSC PC

TA, JO, IT with flight pro-totype (2 cycles)

Autonomous testing of flight proto-type within the scope of incoming test(external examination of RH and GSmono-units)

Test at the user’s

Meas interf level&volt slump

Figure 1 Diagram of work with TP and FP of "Pamela" RH at the "Progress" plant and at the user’s.

353П-46КС-27895-1105 8

3. TESTS OF THE HARDWARE AS PART OF THE ARTICLE

3.1 Purposes and tasks of the tests.

The purpose of electrical testing of "Pamela" RH as part of the article is to

confirm its serviceability as part of the article and availability for operation in ac-

cordance with its mission.

Tasks of the electrical testing of the hardware as part of the article are as

follows:

а) testing accuracy of hardware/46КС article systems connections;

б) testing the hardware serviceability including checkout of: PSCU, Termi-

nal, basic and standby protection units (PU) sets, basic and standby chan-

nels of basic and standby exchange adapter, basic and standby power sup-

ply, basic and standby electronics of the tracker, trigger, С4, ND, "I-DAQ"

system and also memory modules А and В;

в) testing electric interaction of the hardware with support systems of the

article: BCtS, CCIU, BTMS, CRPDS, HSRL OBE and also electric interac-

tion of communication lines with these systems.

To test communication lines between the hardware and support systems of

the article it is necessary to perform:

1. Two-way exchange of information (delivery of macro commands

(MCMD) to the hardware and receipt of service information from

the hardware) by line A and line B using the terminal – BCtS

communication test.

2. Issue of all necessary CC to the hardware under sequential dis-

connection of buses Еок1, Еок2 – CRPDS communication test.

3. Transmission of test information to HSRL OBE by the primary

and standby channel – HSRL communication test.

4. Issue of synchrosignals to the hardware by channel 1 and 2 -

CCIU communication test

353П-46КС-27895-1105 9

5. Assessment of TM for reference values – BTMS communication

test.

Functional scheme of communication between "Pamela" RH and GTS and

article’s systems is given in figure 2.

PSS

CRPDS BCtS CCIU

"Pamela" RH

HSRL OBE BTMS GTS

CMS

Figure 2 Functional scheme of communication between "Pam-

ela" RH and support systems of article 46КС and GTS.

353П-46КС-27895-1105 10

3.2 Tests support.

All kinds of testing of the hardware as part of article 46КС are carried out

using ground testing complex on the basis of the control computer and mathemati-

cal test support. Hardware control in the course of the test activations and joint op-

eration with HSRL OBE is carried out by nominal program A11 using RAM Pro-

tocol. Hardware control in the course of IT is carried out by nominal program A11

initiated from OP.

Prior testing of "Pamela" RH as part of SC the following SC systems shall

be activated and ready for operation: BVS, BDTS, BTCS, CRPDS, PSS, CMS.

HSRL OBE shall be activated and ready for operation prior to the first download

session during PAM TA with HSRL, JO and IT.

Pressurized container with "Pamela" RH shall be in transport condition

with the cover closed, "Pamela" RH is nominally connected with the SC systems.

"Pamela" RH GSE shall be connected with "Pamela" RH through connector BCS

Х «ГН15Т.10» and connected with HSRL OBE GTE according to operating in-

struction ИЭ17 part 44. During all kinds of electrical testing of "Pamela" RH as

part of the SC the ground cooling system (353У.9152.001) is connected to "Pam-

ela" RH cooling loop hydraulic pipelines. Connection of the cooling loop and fill-

ing the working fluid into the cooling loop are made according to Instructions

353У.9152.001 ПМ 2 and 353У.9152.001 ИЭ 2 during tests in “Progress” plant

and in the launch site accordingly. When the pressurized container is in operating

position or in any intermediate position the tests shall not be carried out.

Power dump is allowed at any operational phase of "Pamela" RH. After

restoration of supply it is necessary to activate test program ЖР67 by input 10 to

deactivate the hardware and to proceed with the nominal operation of "Pamela"

RH.

3.3 Evaluation of test results.

353П-46КС-27895-1105 11

Control of "Pamela" RH serviceability in the course of all electrical tests in

the article is executed by GTS using test programs ЖР67, ЖР68, ЖР69.

ЖР67 – program "Pamela" RH serviceability test in the course of TA with

support systems of the article";

ЖР68 – program "Control of "Pamela" RH/HSRL" JO;

ЖР69 – program "Test of "Pamela" RH serviceability in the course of IT".

To control serviceability of the hardware the following items are used by

GTS:

- nominal circuits of TM-control by channels of addressed TM selection;

- technological control circuits led to GTS through the signaling transmit-

ter (ST);

- Computer data (CD) transmitted from BCtS RAM through technologi-

cal channel "МТ".

Evaluation of tests results is carried out by ANP prints, tapes of open re-

cording of BTMS, testing scientific data.

3.4 GTE composition.

"Pamela" RH GSE (КБ7.101.00.000.00), GTE of HSRL OBE and ground

cooling system (353У.9152.001) are used in the course of testing of "Pamela" RH

as part of the article.

353П-46КС-27895-1105 12

4 TEST ACTIVATIONS OF "PAMELA" RH WITH

SUPPORT SYSTEMS OF SC

Test activations of "Pamela" RH with support systems are composed of

two parts: PAM TA and PAM TA with HSRL.

4.1 Procedure of PAM TA.

PAM TA are obtained using RAM Protocol 42 "Pamela" RH control in

TA" and test program ЖР67. The hardware control is performed by nominal pro-

gram А11.

RAM Protocol 42 is intended for:

- generation of ID for program А11 and the hardware,

- initiation of А11 program inputs at the necessary moments of time (ac-

cording to the time diagram),

- on-board and ground software synchronization,

- gaining CD by the test program through route mark (“RM”) channel,

- debugging test of MCMD "Lock the transmitter" and MCMD "Unlock

the transmitter" by the Terminal.

Prior PAM TA it is necessary to put BTMS in operational mode "ЗАП4",

ПрБ1.

PAM TA consist of the following fragments: "RH test, "Operation in tech-

nological regime", "GS test ".

It is possible to debug each fragment separately. Fragment debugging is de-

termined by availability of "1" in the bit corresponding to the fragment’s number,

GV "VPAMTA" (variant of «Pamela» RH test activations). The distribution of bits

of GV "VPAMTA" is given below:

23 … 6 5 4 3 2 1 0

fr.6 fr.5 fr.4 fr.3 fr.2 fr.1

Fragments 5, 6 are performed during Pam/HSRL TA.

353П-46КС-27895-1105 13

This variable is specified from the planning program КП6 prior ЖР67 ini-

tiation by input 1 and is transmitted to RAM Protocol42 by switching on and off

the "ПИ КТП", "ПИСУД" indicators from program ЖР67.

If necessary "Pamela" RH operation on a special program is provided in-

cluding "Pamela" RH dismantling from the article and testing by means of "Pam-

ela" RH GSE.

353П-46КС-27895-1105 14

4.1.1 Procedure of PAM TA fragment 1 – "RH test".

Time diagram of this fragment is given in fig. 3.

The following activities are performed on this fragment:

test of hardware/CRPDS communication (transmission of all CC provided

for "Pamela" RH by buses Еок1 and Еок2),

test of "Pamela" RH/BTSC communication (operation under alternate dis-

connection of primary and standby synchrosignals issue channels),

debugging test of MCMD "Lock the transmitter" and MCMD "Unlock the

transmitter" by the Terminal.

For this purpose four "Pamela" RH activations are performed: the first one

and the third one - with bus Еок2 being disconnected, the second one and the

fourth one – with bus Еок1 being disconnected. For it under the second activation

the first BTCS synchrosignals channel is active, under the third one - the second

BTCS synchrosignals channel is active.

Connection and disconnection of buses Еок1 and Еок2 and also connec-

tion/disconnection of BTCS channels are performed by program ЖР67.

In case of disconnection of channel 1 BTCS, channel 2 BTCS, connection

of channels (after debugging of input 1, 2, 3 of program Б76 respectively) attribute

"ABN BTCS" is analyzed by program ЖР67. When this attribute=1 "PAM ABN"

GV (abnormal completion of "Pamela" RH test activations) of value =1 is formed

and drift to line 50 is performed.

Program ЖР67 is initiated by input 1 from the planning program before the

beginning of fragment 1 and RAM Protocol 42 is initiated right after OP loading.

First program ЖР67 verifies temperature TM-parameters of "Pamela" RH

for compliance with allowed values. If there are no "anomalies", program ЖР67

synchronizes its work with on-board timing. For it ЖР67 sets indicator "ПИ КТП"

to 0 ("ПИ КТП" is on) and for two minutes it controls "МТ1" signal generated by

RAM Terminal42 with the state of "ПИ КТП" indicator being changed from “on”

353П-46КС-27895-1105 15

to “off” ("ПИ КТП" indicator status poll is performed by RAM Protocol42 with a

period of Т= 250 msec).

If "МТ1" signal is generated in due time ЖР67 program’s actions are as

follows:

-Within 3 seconds after synchronization ЖР67 changes "ПИ КТП" indica-

tor state by issuing CC "Off ПИ КТП" or CC "On ПИ КТП" and also issues CC

"On ПИ СУД" or "Off ПИ СУД" depending on the first position of GV "V PAM

TA" (for unit position of GV "V PAM TA" CC "Off ПИ СУД" is issued and for it

"ПИ СУД" indicator value=1).

- in 3 seconds after synchronization RAM Protocol42 performs control of

"ПИ КТП" indicator state and in case of its change it inserts "1" in position 1 of

its working cell "ВРАБ" if "ПИ СУД"=1 or – 0 if "ПИ СУД"=0;

- after that the rest three positions of "ВРАБ" variable are generated with

a period of 3 sec similarly to the above. So within 12 seconds from the

moment of synchronization the transmission of data on PAM TA frag-

ments processing on board is completed.

Then program ЖР67 executes the second RAM Protocol 42 timing with

zeroing the on-board time scale (ТБШВ) and time counters in the GTC and

BTMS. This is performed as follows:

-RAM program records the value=525258 in GV «КДБСК1.КОД» and

ТБШВ=0 in GV «ВЯ БСУ»;

- RAM program enters the setting of the time interval УВИД=tбшв +3sec.

for reference to the mark of seconds for activation of program A40 by input 1.

- during 3 seconds program ЖР67 controls the generation of "МТ" signal

(140478), formed by A40 program.

After that, program ЖР67 (If "МТ" signal from program A40 is generated

in due time) executes clearance of time meters at GTS and BTMS and proceeds

with its work according to the timing diagram.

353П-46КС-27895-1105 16

Upon completion of the fragment debugging program ЖР67 executes dis-

connection of "ПИ КТП" indicator.

In abnormal completion of PAM TA (no "МТ1", abnormal temperature pa-

rameters, a unit value of GV "N BTCS", etc) program ЖР67 forms GV "PAM

ABN"=1.

In the process of its operation in this fragment RAM Protocol 42 executes

connection of program А11 inputs to carry out:

- test of "Pamela" RH/BCtS communication channel (DTL А),

- issue of MCMD "Time synchronization", "Mode selection" with an at-

tribute of TRD purge inhibition, "Pamela" RH test”,

- debugging test of MCMD "Lock the transmitter" and MCMD "Unlock

the transmitter" by the Terminal,

- request of the status word of the hardware after it was subjected to some

activities.

RAM Protocol 42 also forms the following signals:

"МТ1" – in case of “on” condition of "ПИ КТП" indicator during timing;

"МТ2" – in case of no “on” condition of "ПИ КТП" indicator during tim-

ing;

"МТ3" – if "Pamela" RH status word with zero positions is available;

"МТ4" – if "Pamela" RH status word with nonzero bits is available or mal-

function of terminal during verification of debugging of MCMD "Lock/unlock the

receiver-transmitter" .

Verification of debugging of MCMD "Lock/unlock the receiver-

transmitter" by the Terminal is performed in the following order:

1) MCMD "Lock the transmitter" is issued to the hardware through DTL A

and this command causes DTL B receiver-transmitter to be locked;

2) After that RAM Terminal42 sets DTL A fault sign to "1" (GV

"КДСПЛ2" [1]=1) and activates input 16 of program А11 where MCL

exchange being executed. The exchange is started by DTL B and is not

353П-46КС-27895-1105 17

executed (no OS) as DTL B receiver-transmitter is locked. Program

A11 forms coded CD А11-0=448 and =638;

3) Then after zeroing the anomaly flag of DTL1 A (КДСПЛ2[1]=0) RAM

Program 42 issues MCMD "Unlock the transmitter" to Pamela through

DTL A, zeroizes GV "НРЛПИБ" (70411[2]=0), sets КДСПЛ2[1] into

“1” and activates input 16 of program А11 where DTL B exchange is

completed normally and program А11 forms coded CD А11-0=0;

4) After that RAM Protocol 42 through DTL B it issues MCMD "Lock the

transmitter" to Pamela and the command causes DTL A transmitter to

be locked;

5) Then RAM Protocol 42 sets DTL A fault attribute to "0" (GV

"КДСПЛ2" [1]=0) and activates input 16 of program А11 where MCL

exchange being executed again. As DTL A receiver-transmitter is

locked, the exchange is not executed (no OS), program А11 forms

coded CD А11-0=208 and goes to DTL B where the exchange is com-

pleted nominally;

6) Then RAM Protocol 42 issues MCMD "Unlock the transmitter" by DTL

B;

7) After that RAM Protocol 42 zeroes DTL A exchange impossibility at-

tribute for program А11 (GV "НРЛПИА" (70412[9]=0) and activates

program А11 by entry 16. DTL A exchange is executed nominally

(coded CD А11-0=0).

Controlling the status word (StW) RAM Protocol 42 executes the follow-

ing: it issues MCMD “OFF GS” if "УНН" parameter (positions 1-4) =1 or 2, if the

value =1 for positions 11, 12, 13 it activates program А11 by input 13 for emer-

gency deactivation of "Pamela" RH.

In fragment 1 RAM Protocol 42 forms the following ID for program А11

and the hardware:

353П-46КС-27895-1105 18

-GV “ВРИСПП”=1,

- MCMD "Mode selection";

- MCMD "RH test".

MCMD data is given in table 2.

For activations 3 and 4:

GV ”ЗВРПК“=1,

GV ”БЛПГК”=0,

GV ”БЛПАМ”=0,

GV “БЛГС”=1,

GV “ВРБУЗП”=1,

GV 'КДБЗ'=528,

GV “НРНД”=0,

GV: “ВРНИЗН”, “ВРВЫСН”=1,

GV “ВРИСПП”=0,

GV “СЧПРПО”=0,

GV “КДМАСК”=0.

All commands sent to the hardware in the first fragment of PAM TA are

given in table 1.

Table 1

Command type Command name The command issue time The com-

mand issue

place

The first activation (in Еок1 and first BTCS channel)

СС "Pam power bus

connection"

at time synchronization - t0 ЖР67

СС "PSCU ON MAIN" 230 s +t0 ЖР67

TLM request for StatusW 350 s +t0 А11

1 data transmission line

353П-46КС-27895-1105 19


mand issue

place

CC "GAS ENABLE" 352 s +t0 ЖР67

"Checkout of interaction between Pamela and BCtS via MCL"

TLM issue of 32 test data

words

355 s +t0 А11

TLM pick-up of 32 test

data words

А11

MCMD "Transmit reply

word"

А11


MCMD

№1

"Time Sync" 365 s +t0 А11


MCMD

№2

"Select Mode" 375 s +t0 А11


CC "IPM1 ON" 385 s +t0 ЖР67

CC "IPM3 ON" 385 s 200 ms +t0 ЖР67

CC "IPM5 ON" 385 s 400 ms +t0 ЖР67



CC "ND power bus

connection"

10 min +t0 ЖР67

CC "ND ON" 11 min +t0 ЖР67

CC "ND low main volt-

age"

12 min +t0 ЖР67

353П-46КС-27895-1105 20


mand issue

place

CC " ND high main

voltage""

13 min +t0 ЖР67

CC "PSCU reset" 14 min +t0 ЖР67

CC "Safe mode on" 15 min +t0 ЖР67

CC " Safe mode off" 16 min +t0 ЖР67

Nominal deactivation

MCMD "Select Mode" 17 min +t0 А11

TLM request for StatusW 17 min 1s +t0 А11

MCMD " Select Mode " 17 min 2s +t0 А11



CC "IPM 1,2 OFF" 17 min 34s +t0 А11

CC "IPM 3,4 OFF " А11


CC "PSCU OFF" А11

CC "ND OFF" А11

CC "GAS OFF" А11

CC "Waiting Mode On" А11

CC "ND power bus dis-

connection"

А11

CC "Pam power bus

disconnection"

А11

CC “GS stand-by off” 18min +t0 ЖР67

CC “GS stand-by on” 18 min 20s +t0 ЖР67

353П-46КС-27895-1105 21


mand issue

place

The second activation (in Еок2 and first BTCS channel)

CC "Pam power bus

connection"

at the time of time sync - t0 ЖР67

CC "PSCU ON MAIN" 230 s +t0 ЖР67


СС "GAS ENABLE" 352 s +t0 ЖР67



words

355 s +t0 А11


data words

А11


word"

А11


MCMD "Time Sync" 365 s +t0 А11


MCMD "Select Mode" 375 s +t0 А11


CC "IPM1 ON" 385 s +t0 ЖР67

CC "IPM3 ON" 385 s 200 ms +t0 ЖР67

CC "IPM5 ON" 385 s 400 ms +t0 ЖР67



CC "ND power bus

connection"

10 min +t0 ЖР67

353П-46КС-27895-1105 22


mand issue

place

CC "ND ON" 11 min +t0 ЖР67


age"

12 min +t0 ЖР67

CC " ND high main

voltage""

13 min +t0 ЖР67

CC "PSCU reset" 14 min +t0 ЖР67

CC "Safe mode on" 15 min +t0 ЖР67

CC " Safe mode off" 16 min +t0 ЖР67

Test of the terminal debugging of MCMD "Lock the transmitter",

"Unlock the transmitter".

MCMD "Lock the transmit-

ter" (on DTL B)

17 min +t0 RAM pro-

gram 42



MCMD "Unlock the trans-

mitter" (on DTL B)

19 min +t0 RAM pro-

gram 42



MCMD Lock the transmit-

ter" (on DTL А)

21 min +t0 RAM pro-

gram 42



MCMD "Unlock the trans-

mitter" (on DTL А)

27 min +t0 RAM pro-

gram 42

353П-46КС-27895-1105 23


mand issue

place



Nominal deactivation (see above)

СС “GS stand-by off” 28min +t0 ЖР67

СС “GS stand-by on” 28 min 20s +t0 ЖР67

The third activation of the hardware (in Еок1 and second BTCS channel)

CC "Pamela power bus

connection"

during time sync - t0 A11

CC "PSCU ON

SPARE"

230 s +t0 A11




words

351 s +t0 А11


data words

А11


word"

А11

MCMD "Time sync" 352 s +t0 А11


CC "IPM2 ON" 354 s +t0 A11

CC "IPM4 ON" 354 s 250 ms +t0 A11

CC "IPM6 ON" 354 s 500 ms +t0 A11



353П-46КС-27895-1105 24


mand issue

place



CC "ND power bus

connection"

А11

CC "ND ON" А11

CC "ND low spare

voltage"

А11

CC "ND high spare

voltage"

А11


The fourth activation (in bus Еок2)

CC "Pam power bus

connection"

в момент синхронизации

времени - t0

ЖР67

CC "PSCU ON

SPARE"

230 s +t0 ЖР67




words

351 s +t0 А11


data words

А11


word"

А11

MCMD "Time sync" 352 s +t0 А11


353П-46КС-27895-1105 25


mand issue

place

CC "IPM 2 ON" 354 s +t0 A11

CC " IPM 4 ON " 354 s 250 ms +t0 A11

CC " IPM 6 ON " 354 s 500 ms +t0 A11





CC "ND power bus

connection"

A11

CC "ND ON" A11

CC "ND low spare

voltage"

A11

CC "ND high spare

voltage"

A11


MCMD "Select Mode" 35 min +t0 А11


MCMD " Select Mode " 35 min 2s +t0 А11



CC "IPM 1,2 OFF" 35 min 34с +t0 А11



CC "PSCU OFF" А11

CC "ND OFF" А11

353П-46КС-27895-1105 26


mand issue

place

CC "GAS OFF" А11

CC "Waiting Mode On" А11

CC "ND power bus dis-

connection"

А11

CC "Pam power bus

disconnection"

А11

353П-46КС-27895-1105 27

Table 2 MCMD, formed by RAM Protocol 42 for fragment 1 of PAM TA.

MCMD "Select Mode"

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter = 0

0 MCMD code = 3316

MCMD length = ?

Time indicator (MSB) = 0

Time indicator (LSB) = 0

0 checksum

MCMD "Pam Test"

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter = 0

0 MCMD code = 8F16

MCMD length = 7



0 checksum

For this fragment "Pamela" RH is activated by CC "ON MAIN PSCU")

from program ПР67, nominal purging of TRD is not executed (for the first and

second activation). For the third and fourth activations Pamela is activated in the

nominal way (by A11 program activation via input 1) with disabling operation

with GS.

"Select Mode"

MCMD data field

"RH" test” MCMD data field

353П-46КС-27895-1105 28

4.1.2 Procedure of PAM TA fragment 2 – "Technological operation".

For this fragment the hardware is activated nominally, the 2, 3 and 6-rd

protection unit, memory module А, standby sources of low and high ND voltage

are ON. A2 operational mode is debugged. The following MCMD are debugged by

the hardware: "PCSU S/W correction", "Memory unload", "History zone reboot".

The time diagram is given in figure 10. Time sync of ground and on-board soft-

ware operation is made in the same way as in item 4.1.1.

In this fragment CD2 shall be taken off with micro OP№*** being pre-

recorded for reading the data array off WM BCtS 510008 address of size 2048 16-

digit words.

RAM Protocol42 forms the following ID necessary for А11 program and

the hardware in this fragment:

- GV "ЗВРПК"=1;

- GV "БЛПГК"=0;

- GV "БЛПАМ"=0;

- GV "ВРБУЗП"=1;

- GV "КДБЗ"=468;

- GV "НРНД"=0;

- GV "ВРНИЗН"=1;

- GV "ВРВЫСН"=1;

- GV "ВРИСПП"=0;

- GV "СЧПРПО"=0;

- GV "КДМАСК"=0;

- GV "БЛГС"=1;

- 2 MCMD "DUMP";

- MCMD "PATCH";

- MCMD "Select Mode";

- MCMD " History zone reboot ".

These MCMD are given in table 3.

353П-46КС-27895-1105 29

Table 3 ID, formed by RAM Protocol42 for fragment 2 of PAM TA.

MCMD "Select Mode" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code =3316

MCMD length = ?



0 checksum

MCMD "DUMP" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 2116

MCMD length =9



checksum

MCMD "PATCH" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

353П-46КС-27895-1105 30

0 MCMD code = 2016

MCMD length = ?



checksum

MCMD " History zone reboot " 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 2216

MCMD length = 6



checksum

Commands sent to the hardware in the second fragment of PAM TA are

given in table 4.

Table 4


mand is-

sue place

"Nominal activation" (with GS operation blocking)

CC "Pamela power

supply connec-

tion"

t0 – time of on-board and

testing program synchroni-

zation

А11

353П-46КС-27895-1105 31


mand is-

sue place

CC "PSCU ON

SPARE"

230 s + t0 А11

TLM request for

StatusW

350 s + t0 А11

"Checkout of in-

teraction between

Pamela and BCtS

via MCL" (see ta-

ble 1)

351 s + t0

MCMD "Time sync" 352 s + t0

TLM request for

statusW

353 s + t0 А11

CC "IPM 2 ON" 354 s + t0 А11

CC "IPM 3 ON" 354 s 250 ms + t0 А11

CC "IPM 6 ON" 354 s 500 ms + t0 А11

TLM request for

statusW

355 s + t0 А11

TLM request for

statusW

506 s + t0 А11

MCMD "Select Mode" 508 s + t0 А11

TLM request for

statusW

509 s + t0 А11

CC "ND power supply

connection"

А11

CC "ND ON" А11

353П-46КС-27895-1105 32


mand is-

sue place

CC "ND low spare

voltage"

А11

CC "ND high spare

voltage"

А11

MCMD

№3

"Select mode" 9 min + t0 А11

MCMD

№4

"DUMP" 10 min + t0 А11

MCMD Recording data af-

ter memory dump

into BCtS RAM

12 min + t0 А11

MCMD

№5

"PATCH" 15 min + t0 А11

MCMD

№6

"DUMP" 18 min + t0 А11

TLM Recording data af-

ter memory dump

into BCtS RAM

19 min + t0 А11

TLM Recording data

from MCMD his-

tory area into

BCtS RAM

22 min + t0 А11

MCMD

№7

"RESET HIS-

TORYAREA"

23 min + t0 А11

353П-46КС-27895-1105 33


mand is-

sue place

TLM Recording data

from MCMD his-

tory area into

BCtS RAM

25 min + t0 А11

"Pamela nominal

switch off" (see

table 1)

40 min + t0 А11

RAM program forms signal "Track mark 3" if MCMD "Reboot MCMD

history area" was performed in the nominal way.

353П-46КС-27895-1105 34

4.1.3 Procedure of PAM TA fragments 3, 4 – "GS test".

The time diagram of the fragments is given in figures 10, 11. Time sync of

ground and on-board software operation is made in the same way as in item 4.1.1.

Fragment 3 is executed both for technological and flight "Pamela" RH pro-

totype.

In this fragment GS is tested for what concerns TRD purging, release of

differential pressure from PC. Fragment 4 is executed with a flight prototype only.

A general nominal purging of TRD is carried out. The duration of this fragment is

about 7 hours. During these hours "Pamela" RH status is under control of nominal

program А11 input 11 (request of the hardware for a status word with 10 sec pe-

riod) and test program ЖР67 input 3 (schematic TM).

For debugging of fragments 3, 4 RAM Protocol 42 forms the following ID:





- GV "КДБЗ"=158;

- GV "НРНД"=0;






- GV "БЛГС"=0;

- MCMD "TRD purging";

- MCMD "Mode selection";

- MCMD "PC pressure release".

These MCMDs are given in table 5.

353П-46КС-27895-1105 35

Table 5 ID, formed by RAM Protocol 42 for fragments 3, 4 of PAM TA.

MCMD "TRD purging" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 3016

MCMD length = 7



checksum

MCMD "PC pressure release" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 3116

MCMD length =7



checksum

MCMD "Select Mode" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 3316

MCMD length =?



353П-46КС-27895-1105 36

checksum

Commands sent to the hardware in the third fragment of PAM TA are

given in table 6.

Table 6


mand is-

sue place

"Nominal activation"

CC "Pamela power

supply connection"

t0 – time of on-board and

testing program synchroni-

zation

А11

CC "PSCU ON MAIN" 230 s + t0 А11

TLM request for StatusW 350 s + t0 А11

""Checkout of in-

teraction between

Pamela and BCtS

via MCL" (see table

1)

351 s + t0

MCMD "Time sync" 352 s + t0

TLM request for StatusW 353s + t0 А11

CC "IPM 1 ON" 354 s + t0 А11

CC "IPM 3 ON" 354 s 250 мs + t0 А11

CC "IPM 5 ON" 354 s 500 мs + t0 А11

CC "GAS ENABLE" А11

"Select mode" MCMD data area

353П-46КС-27895-1105 37


mand is-

sue place





CC "ND power supply

connection"

А11

CC "ND ON" А11


age"

А11

CC "ND high main

voltage"

А11

MCMD

№8

"TRD purge" 540 s + t0 А11

MCMD

№9

"Select Mode" 1140 s + t0 А11

MCMD

№10

"Pres container

pressure drop start"

1200 s (7 hours 1140s)*+ t0 А11

"Pam. nominal

switch off" (see ta-

ble 1)

1620 s (7 hours 1560s )* +

t0

А11

* Values in parentheses are given for fragment 4.

353П-46КС-27895-1105 38

ЖР67 in.1

Figure 3 Time diagram of PAM TA fragment 1 (beginning)

CC

"R

ESET

PSC

U"

CC

"G

S st

and-

by

OFF

"

CC

"G

S st

and-

by

ON

"

УВИД1=350s+tОШВ

КП6 CC"Еок2 bus

off"

RAM prg. 42

t0=tCTS=0

МТ

t0+230s

PSC

U O

N M

AIN

(PSC

U O

N S

PAR

E)

УВИД2=355s+ tОШВ

А11 inp.16

(test MCL)

GA

S EN

AB

LE

Pam

’s

pow

er

bus c

onne

ctio

n

А36 initiation in input 26

УВИД3=357s+tошв А11 in.p15

(St W)

МТ3

А11 inp.15

(St W)

МТ3

А11 inp. 6

(MCMD "Time sync.")

А11 inp. 6

(MCMD "Seltct Mode")

УВИД4=365s+tошв

IPM

1 (2

) ON

IPM

3(4)

ON

IPM

5(6)

ON

t0+385s


А11 inp.15

(St W)

МТ3

УВИД5=367s+tошв УВИД8=387s+tошв

А11 inp.15

(St W)

МТ3


TRD purging inhibit in-

dicator is introduced

А11 inp. 15

(St W)


А11 in.p15

(St W)

МТ3


МТ3

t0+352s

МТ1

OP

1-st "Pamela" RH activation

УВИД10=17min+tо

А11 inp.2

deactivation

2s 2s

2s 2c

2s 2s

A40 in.1 УВИД=3s+tОШВ

CC

"N

D p

ower

bus

con

-

nect

ion"

CC

"N

D O

N"

CC

"N

D h

igh

volta

ge m

ain"

CC

"N

D lo

w v

olta

ge m

ain"

CC

"Sa

fe m

ode

on"

CC

"Sa

fe m

ode

off"

t0 +10min t0 +14min t0 +15min t0 +16min t0 +18min t0 +18min 20s

353П-46КС-27895-1105 39

Figure 3 Time diagram of PAM TA fragment 1 (continued)

УВИД2=19 min +tошв УВИД3=21min ы+tошв

А11 in.16

MCL TEST

А11 in.16

MCL TEST

MCMD "Lock the

transmitter"

MCMD "Unlock the

transmitter"

Test of MCMD "Lock the transmitter", "Unlock the transmitter"

by bus B

t0+20min t0+21min t0+22min

CC

"R

ESET

PSC

U"

CC

"SA

FEM

OD

EO

N"

CC

"SA

FE M

OD

E O

FF"

КУ

"Вкл

. Еок

2"

КУ

"Откл.

Еок

1"

Б76 input1

t0+20min t0+21min 60s

t0+23min

2nd activation of

Pamela

УВИД11=23min +tошв

УВИД1=17 min+tошв

353П-46КС-27895-1105 40

Figure 3 Time diagram of PAM TA fragment 1 (continued)

А11 in. 2

off

УВИД4=23 min+tошв УВИД5=27 minт +tошв

А11 in.16

MCL TEST А11 in.16

MCL

MCMD "Lock the

transmitter"

MCMD "Unlock the

transmitter"

Test of MCMD "Locking", "Unlocking" in bus А

353П-46КС-27895-1105 41

+

Figure 3 Time diagram of PAM TA fragment 1 (ending)

БР76 input3 БР76 input 2

3-rd activation of "Pamela" RH

Бр76 input 3

УВИД2=14min+tошв

А11 input 2

deactivation

4-th activation of "Pamela" RH

CC

"O

FF Еок

2"

CC

"O

N Еок

1"

t0+30min 60 sec 60 sec

60 sec

CC

"O

N Еок

2"

t0+15min C

C "

OFF

Еок

1"

t0+16min

t0+31min t0+32min

t0+18min

CC

"G

S

stan

d-by

off

"

CC

"G

S

stan

d-by

on"

t0+28min t0+28min 20s

А11 input 1

А11 input 1

УВИД1=t0+18min

deactivation

А11 in-

put 2

УВИД2=t0+14min

УВИД1=t0+33min

353П-46КС-27895-1105 42

Figure 4 Time diagram of PAM/HSRL TA fragment 5 (beginning).

УВИД4,i=760s+tОШВ

i=1-200

t0=tcts=0

ЖР67 inp.5

А11 inp. 9

MCMD "Orbital

info"

ПрОЗУ 43

МТ

А11 inp.1

Pamela on

УВИД2=600s+tОШВ УВИД3=660s+tОШВ

А11 inp.7

MCMD "inclina-

tion info"

А11 inp.6

MCMD "Time

Sync"

А11 inp.15

ССА request


МТ3


А11 inp.6

MCMD to check trigger

УВИ7=8500s+tОШВ

RAM prg13 in.1


А11 inp10

1st Pam/HSRL download session


А11 inp.6

MCMD "Select Mode"


МТ5, computer data: А11-1,

А11-2



A40 inp.1

353П-46КС-27895-1105 43

Figure 4. Time diagram of PAM/HSRL TA fragment 5 (ending).

Тнм2=17400s+ tОШВ

2nd Pam/HSRL download session

МТ5, computer data: А11-1,

А11-2


А11 inp.2

Pam switch off

А11 inp.2


А11 inp1


А11 inp.6

MCMD to switch on spare electronics


353П-46КС-27895-1105 44

4.2 Procedure of PAM/HSRL TA.

Before PAM/HSRL TA start ЖР 67 program is activated by input 5 from

the planning program. RAM program 43 is activated immediately after loading the

operational program. Nominal A11 program controls Pamela.

Prior debugging this fragment it is necessary to re-activate HSRL without

warming-up and to initiate BDTS to mode "ЗАП8", ПрБ1. HSRL initiation is re-

corded by tapes of open TM recording.

PAM/HSRL TA consist of 2 fragments: “Nominal operation, checkout of

spare electronics” and “Checkout of connection with HSRL” .

It is possible to debug each fragment separately. The point of fragment de-

bugging is determined by availability of "1" in the bit corresponding to fragment’s

number, GV "VPAMTA" (variant of «Pamela» RH test activations).The distribu-

tion of bits of this variable, its assignment and uplinking of information on the per-

formance of PAM/HSRL TA fragments is analogous to the described under 4.1

and 4.1.1. Before performing fragment 5 it is required to perform fragment 6.

4.2.1 Procedure of PAM/HSRL TA fragment 5 – "Nominal operation,

standby electronics test".

The diagram of debugging this fragment by the hardware is given in Fig 4.

Time sync of ground and on-board software operation is made in the same

way as in item 4.1.1.

"Pamela" RH GSE/HSRL GTE connection diagram is given in Fig 5.

For debugging this fragment of PAM TA it is necessary to connect per-

sonal computer (PC) of "Pamela" RH GSE and HSRL GTE and also to initiate

RAM Protocol 13 input 1 developed by department 1107 from RAM Protocol 43 to

initiate HSRL OBE in due time (not less than 100 sec prior to the first Тнм1-

exchange session).

For this testing fragment "Pamela" RH is activated twice. The first activa-

tion of the hardware is executed by initiation of nominal program А11 in input 1

from RAM Protocol 43 with setting GV "БЛГС (GS disable)"=0. The 1, 4, 6-th

353П-46КС-27895-1105 45

IPMs, memory module А, primary sources of low and high ND voltage are initi-

ated. After nominal activation the hardware is in В4 mode of operation.

After that by consequent initiations of program A11 in inputs 9, 6 RAM

Protocol 43 provides for issue of MCMD: "Orbit information (CMMP)", "Time

synchronization".

Then RAM Protocol 43 provides for transmission of inclination informa-

tion arrays to the hardware within 10 minutes with 3 sec period by repeated initia-

tions of program A11 in input 7 for simulation of similar conditions in the course

of nominal operation of "Pamela" RH.

After that RAM Protocol 43 performs ССА zone request (by initiating pro-

gram А11 in input 15), recording of 12 ССА zone words to BCtS RAM and

"МТ3" signal transmission to GTS RAM via "МТ" channel in case all CCА zone

parameters are normal.

Then RAM Protocol 43 performs testing of trigger system of the first and

second level by issue of MCMD "Select mode"with specific set of parameters.

After that RAM Protocol 43 provides for HSRL exchange session for

transmission of the accumulated scientific data via HSRL OBE and HSRL GTE

commutator to "Pamela" RH GSE for processing and making a conclusion. This

exchange session is carried out using the main exchange adapter in the main data

transmission channel.

Then RAM Protocol 43 by switching program А11 by input 6 provides for

issue of MCMD "Select mode" to Pamela, transmission of computer data arrays

A11-1, A11-2 to GTS RAM and the following (in 20 sec) "Pamela" RH deactiva-

tion (by initiating program А11 in input 2).

After that the second hardware activation is executed in this fragment. It is

also executed by initiation of nominal program А11 in input 1 from RAM Protocol

43. IPMs 2,3,5, memory module A, ND spare high and low voltage supplies are

switched on. After nominal activation the hardware is in В4 mode of operation.

353П-46КС-27895-1105 46

Then RAM Protocol 43 provides for issue of MCMD for connection of

standby electronics.

After that the first and second level triggers are tested in the way, specified

above.

After that RAM Protocol 43 provides for HSRL exchange session for

transmission of the accumulated scientific data via HSRL OBE and HSRL GTE

commutator to "Pamela" RH GSE for processing and concluding.

Then RAM program 43 provides for transmission of computer data arrays

A11-1, A11-2 to GTS RAM. Then nominal "Pamela" RH deactivation is executed

by initiating program А11 in input 2.

For debugging PAM/HSRL TA fragment 5 RAM Protocol 43 forms the

following ID:




- GV "БЛГС"=0 for the first activation and =1 for the second activation;

- GV "ВРБУЗП"=0 for the first activation and =1 for the second activa-

tion;

- GV "ВРНИЗН"=0 for the first activation and =1 for the second activa-

tion;

- GV "ВРВЫСН"=0 for the first activation and =1 for the second activa-

tion;




- GV "КДБЗ"=518 (for the first activation) and GV "КДБЗ"=268 (for the

second activation);

- GV "НРНД"=0;

- GV "ВРАДАП"=0;

353П-46КС-27895-1105 47

- GV "ВРКАН"=0 for the 1-st exchange session, =1 for the second ex-

change session.

- MCMD "Orbit information (CMMP)";

- MCMD "Inclination data (AP)";

- MCMD "Time synchronization";

- MCMD "Select mode".

These MCMD are given in table 7.

MCMD for activation/deactivation of triggers and initiation of standby

electronics will be given later.

353П-46КС-27895-1105 48

Table 7 MCMD formed by RAM Protocol 43 for PAM/HSRL TA frag-

ment 2.

MCMD " Orbital information"

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter = 0

0 MCMD code= Е116

MCMD length = 20

Time tag (MSB) = 0

Time tag (LSB) = 0

1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0

1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

0 checksum

MCMD " Inclination info"

CM

MP

arra

y

353П-46КС-27895-1105 49

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter = 0

0 MCMD code = Е216

MCMD length = 66

Time tag (MSB) = 0

Time tag (LSB) = 0

1 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0

0 1 1 0 0 0 0 1 1 1 0 0 0 0 0 0

0 1 1 1 0 0 1 1 1 0 0 0 0 0 0 0

0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0

0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0

0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0

0 0 1 1 0 0 1 1 1 0 0 0 0 0 0 0

1 1 1 0 0 0 0 1 1 1 0 0 0 0 0 0

1 1 0 0 0 0 0 0 1 1 1 0 0 0 0 0

inclination info-2 = inclination info-1

inclination info -3 = inclination info -1




0 checksum

MCMD "Time Sync"

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = Е016

AP-

1 ar

ray

353П-46КС-27895-1105 50

MCMD length = 8

Time tag (MSB) = 0

Time tag (LSB) = 0

ТБШВ

ТБШВ

checksum

MCMD "Select mode"

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code = 3316

MCMD length = ?

Time tag (MSB) = 0

Time tag (LSB) = 0

checksum

All controls issued to the hardware in the first fragment of PAM/HSRL TA

are given in table 8.

353П-46КС-27895-1105 51

Table 8

Control type Control name The control issue time The con-

trol issue

point


CC "Pamela power

supply connec-

tion"

t0 – time of on-board and test-

ing program synchronization

А11

CC "PSCU ON

MAIN"

230 s + t0 А11

TLM request for

status word

350 s + t0 А11

MCMD "Checkout of

Pamela/BCtS

interaction via

MCL" (see table

1)

351 s + t0

MCMD "Time Sync" 352 s + t0

MCMD Request for

Status word

353s + t0 А11

CC "IPM 1 ON" 354 s + t0 А11

CC "IPM 4 ON" 354 s 250 мs + t0 А11

CC "IPM 6 ON" 354 s 500 мs + t0 А11

CC "GAS EN-

ABLE"

А11

MCMD request for

status word

355 s + t0 А11

353П-46КС-27895-1105 52


trol issue

point

MCMD request for

status word

506 s + t0 А11


MCMD request for

status word

509 s + t0 А11

CC "ND power bus

connection"

А11

CC "ND ON" А11

CC "ND low voltage

main"

А11

CC " ND high volt-

age main"

А11

MCMD

№11

"Orbital infor-

mation"

600 s + t0 А11

MCMD

№12

"Time Sync" 660 s + t0 А11

MCMD

№13

"Inclination in-

formation"

760 s + t0 and further with 3s

period during 10 min

А11

MCMD ССА request 1360 секунд + t0 А11

MCMD

№14

“Select mode”

to check trigger

1400 секунд + t0 А11

First download session

MCMD "Select mode" 8880 секунд + t0 А11

MCMD "Time Sync" А11

MCMD "DOWNLOAD" А11

353П-46КС-27895-1105 53


trol issue

point

MCMD request for CCA А11

MCMD request for CCA 9103 секунды + t0 А11

MCMD

№14а

"Select Mode" 9110 секунд + t0 А11

MCMD Transmission of

computer data

arrays A11-1,

A11-2 to GTC

RAM


Nominal deacti-

vation (see

tab.1)


Штатное включение (второе)

CC "Pamela power

supply connec-

tion"

9300 s + t0 А11

CC "PSCU ON

SPARE"

9530 s + t0 А11

TLM request for

status word

9650 s + t0 А11

MCMD "Checkout of

Pamela/BCtS

interaction via

MCL" (see table

1)

9651 s + t0

353П-46КС-27895-1105 54


trol issue

point


MCMD request for

status word

9653s + t0 А11

CC "IPM 2 ON" 9654 s + t0 А11

CC "IPM 3 ON" 9654 s 250 мs + t0 А11

CC "IPM 4 ON" 9654 s 500 мs + t0 А11

MCMD request for

status word

9655 s + t0 А11

MCMD request for

status word

9806 s + t0 А11


MCMD request for

status word

9809 s + t0 А11

CC "ND power bus

connection"

А11

CC "ND ON" А11

CC "ND low voltage

spare"

А11

CC " ND high volt-

age spare"

А11

MCMD

№15

“Select Mode”

to switch on

spare electronics

9900 s + t0 А11

MCMD

№16

“Select Mode”

to check trigger

10000 s+ t0 А11

353П-46КС-27895-1105 55


trol issue

point

2nd Pam/HSRL download session

MCMD "Select mode" 17380 s + t0 А11



MCMD request for CCA А11

MCMD request for CCA 17603 s + t0 А11

Transmission of

computer data

arrays A11-1,

A11-2 to GTC

RAM

17650 s + t0

Nominal activa-

tion (see tab. 1)

17700 s + t0 А11

353П-46КС-27895-1105 56

МП2 array formed by RAM Protocol 43 to provide for two exchange ses-

sions is given in table 9.

Table 9

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1

ТНОИ(time of interval countdown start)=0 2

КРСР КСН

ПМХСМ

НА

3

НА

2

НА

1

КМАР (number of download sessions)=2 3

НВ (number of orbit) =1 4 ТНСН1 5

//////////////////////// ДЛСН1 6 ТНСН2 7

//////////////////////// ДЛСН2 8 ТНСН3 9

//////////////////////// ДЛСН3 10 ///////////////////////////////////// ПКАС ПД /////////// 11

КПЗВ КПЗН 12

//////////////////

ПРБ

А13

ПРБ

А23

СП3

ПРБ

А12

ПРБ

А22

СП2

ПРБ

А11

ПРБ

А21

СП1 ///// 13

//////////////////////////////////////////////////////////////// НЧК3 НЧК2 НЧК1 14 ПХМ1

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 /////////////////////////////// КМАРР=1 КРНА=1110 1

ДЛМ (duration of download) =200с 2 ТНМ (time of download start)=8900 секунд 3

СДИ* 4 /////////////////////////////////////////////////////////////////////////////////////////////////////// 5

ДЛС 6 ДЛЗНП (ДЛАП2) 7

СПК2 НПК2 (НМП2) СПК1 НПК1 (НМП1) 8 СПК4 НПК4 (НМП4) СПК3 НПК3 (НМП3) 9

////////////////////////////////////////////

ПВКЗУ

ПС /////////// НМВ (number of download in orbit)=1 10

353П-46КС-27895-1105 57

00000 00 0 0 0000000 11

0 0000000 0 0000000 12 С К МЭ Т1 Т2 Т3 /////////// РФСЧ ///////////////////////////////////// 13 КСНР1 КСНВ1 КСНН1 ///// НРЗ1 14 КСНР2 КСНВ2 КСНН2 ///// НРЗ2 15 КСНР3 КСНВ3 КСНН3 ///// НР33 16 КС1 КС2 КС3 /////////////////////////////// РВО 17

ПХМ2 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

00 /////////////////////////////// КМАРР=1 КРНА=1110 1 ДЛМ (duration of download) =200с 2

ТНМ (time of download start)=17400 секунд 3 СДИ* 4

/////////////////////////////////////////////////////////////////////////////////////////////////////// 5 ДЛС 6

ДЛЗНП (ДЛАП2) 7 СПК2 НПК2 (НМП2) СПК1 НПК1 (НМП1) 8 СПК4 НПК4 (НМП4) СПК3 НПК3 (НМП3) 9

////////////////////////////////////////////

ПВКЗУ

ПС /////////// НМВ (number of download in orbit)==2 10

00000 00 0 0 0000000 11


МХСМ

353П-46КС-27895-1105 58

4.2.1.1 Order of gaining information from HSRL GTE.

1) HSRL GTE records (to flight time diagram) information obtained

from technological output of HSRL OBE during PAM/HSRL TA

or from nominal output of HSRL OBE during JO and IT;

2) Information of each recorded route is conversed into a file;

3) After completing PAM TA fragment HSRL GTE converses in-

formation into the original form – information packets at HSRL

OBE input;

4) When the information is conversed HSRL GTE by request of

"Pamela" RH GSE issues information via ЛВС "FAST

EHERNET" at a rate of 100 Мbaud (real transmission rate – 2-5

MB/s). "Pamela" RH GSE request consists in the following:

"Pamela" RH operator opens "Pamela" directory (with conse-

quent opening of all embedded directories) in PC being part of

HSRL GTE and transfers necessary files to PC being part of

"Pamela" RH GSE.

The structure of the information in directory "Pamela" of HSRL GTE PC is

as follows:

- The directory with a number and date of the fragment –

"ФХУ_АБ_ВГ_ДЕ_ЖЗ", where: Ф - fragment,

Х – number of the fragment,

У – sequence number for the fragment

iteration,

АБ – month.

ВГ – date,

ДЕ – hours,

ЖЗ – minutes;

- "MN" directory with the number of the route in this PAM TA fragment,

353П-46КС-27895-1105 59

where М – route, N - № of the route in this fragment,

- "SFI.pam" data file containing packets with scientific information of

"Pamela" RH.

353П-46КС-27895-1105 60

4.2.2 Procedure of PAM/HSRL TA fragment 6 – "Test of HSRL com-munication channels". The time diagram of this fragment is given in Figure 6.



"Pamela" RH GSE/HSRL GTE connection diagram is given in Fig 5.

In this fragment RAM Protocol 43 provides for the following activities:

- timely (not less than 100 sec before the beginning of the first Тнм1-

exchange session) initiation of RAM Protocol 13 input 1 for activation

of HSRL OBE,

- the hardware change over to operational mode А0 (by initiating program

А11 in input 6),

- issue of MCMD "BITE" with a test 16-digit word to fill Pamela mem-

ory with test information (by initiating program А11 in input 6),

- issue of MCMD "Select mode" to memorize "prototype" in "Pamela"

RH and to set file-free information pick-up mode (by initiating program

А11 in input 6),

- managing two HSRL exchange sessions (by addressing to program А11

in input 10),

- the hardware change over to operational mode А0 (by initiating pro-

gram А11 in input 6),

- issue of MCMD "Memory configuration" to activate memory module В

(by initiating program А11 in input 6),

- issue of MCMD "BITE" with a test 16-digit word to fill Pamela mem-

ory with test information (by initiating program А11 in input 6),

- issue of MCMD "Select mode" to memorize "prototype" in "Pamela"

RH (by initiating program А11 in input 6),

- managing the third HSRL exchange session,

353П-46КС-27895-1105 61

- issue of MCMD "Memory configuration" to activate memory module

A (by initiating program А11 in input 6),

- "Pamela" RH deactivation by initiating program А11 in input 2.

In the sixth fragment three exchange sessions are provided: with a main

exchange adapter in the main sub-channel №19, with a standby exchange adapter

in the standby sub-channel №19, the third exchange session is executed with a

main adapter in the main exchange channel.

In this fragment memory module A is active during sessions 1, 2 and mem-

ory module B – during session 3.

To perform this test assembly program ПрБ1 and operational mode

"ЗАП8" of BDTS are initiated not late than 1minute prior the first activation of

HSRL.

For debugging of fragment 3 RAM Protocol 42 forms the following ID:




- GV ”БЛГС”=1;







- GV "КДБЗ"=528;

- GV "ВРКАН"=0 for exchange sessions 1,3 and =1 for session 2;

- GV "ВРАДАП"=0 for exchange sessions 1, 3 and =1 for session 2;

- GV "ВРИОК=1";

- MCMD "Memory configuration";

353П-46КС-27895-1105 62

- MCMD "select mode"(2 types – for change over to mode А0 and for

making the prototype);

- MCMD "BITE";

- МП2 array.

MCMD: "BITE", "Memory configuration", "Select mode" are given in ta-

ble 10.

МП2 array including 3 sub-arrays with route characteristics (one for each

exchange session) is given in table 11.

Figure 5 "Pamela" RH GSE/HSRL OBE GTE connection diagram

"Pamela" RH

ХР5 ХР6

Input com-

mutator

HSRLOB

FTD

(Volume = 20

Gb)

FAST ETHERNET(100 м)

"Pamela" RH

GSE

HSRL GTE

Cable type –

STR categ.5)

353П-46КС-27895-1105 63

Table 10 MCMD, formed by RAM program 43 for fragment 6 of Pamela/

HSRL test activations.

MCMD "Memory configuration" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code =2916

MCMD length =7

Time tag (MSB) = 0

Time tag (LSB) = 0

ПВВМ ПВМП

checksum

ПВМП – memory module selection flag =0, if memory module A is selected, and

=1 if memory module B is selected

ПВВМ – flag of activation/ deactivation of the selected memory module.

Table 10 cont’d.

MCMD "BITE" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code =8016

MCMD length =7

Time tag (MSB) = 0

Time tag (LSB) = 0

1 1 1 0 0 0 1 1 1 0 0 0 1 1 1

checksum

Table 10 cont’d

MCMD "Select Mode"

353П-46КС-27895-1105 64

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 3316

MCMD length = ?

Time tag (MSB) = 0

Time tag (LSB) = 0

checksum

Table 10 cont’d.

MCMD "Select Mode"

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code = 3316

MCMD length = ?

Time tag (MSB) = 0

Time tag (LSB) = 0

checksum

Data field

Data field

353П-46КС-27895-1105 65

Table 11

МП2 (1) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1

ТНОИ (time of interval countdown start)=0 2

КРСР КСН

ПМХСМ

НА

3

НА

2

НА

1


НВ (number of orbit)=3 4 ТНСН1 5

//////////////////////// ДЛСН1 6 ТНСН2 7

//////////////////////// ДЛСН2 8 ТНСН3 9

//////////////////////// ДЛСН3 10 ///////////////////////////////////// ПКАС ПД /////////// 11


//////////////////

ПРБ

А13

ПРБ

А23

СП3

ПРБ

А12

ПРБ

А22

СП2

ПРБ

А11

ПРБ

А21

СП1 ///// 13

//////////////////////////////////////////////////////////////// НЧК3 НЧК2 НЧК1 14 ПХМ1

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 /////////////////////////////// КМАРР=1 КРНА=1110 1

ДЛМ (duration of download session)=200s 2 ТНМ (time of download session start)=20min 3

СДИ* 4 /////////////////////////////////////////////////////////////////////////////////////////////////////// 5



////////////////////////////////////////////

ПВКЗУ

ПС ///////////НМВ (number of

download session in or-bit) =1

10

00000 00 0 0 0000000 11

0 0000000 0 0000000 12

353П-46КС-27895-1105 66

С К МЭ Т1 Т2 Т3 /////////// РФСЧ ///////////////////////////////////// 13 КСНР1 КСНВ1 КСНН1 ///// НРЗ1 14 КСНР2 КСНВ2 КСНН2 ///// НРЗ2 15 КСНР3 КСНВ3 КСНН3 ///// НР33 16 КС1 КС2 КС3 /////////////////////////////// РВО 17

МХСМ

МП2 (2)

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1


КРСР КСН ПМХСМ

НА

3

НА

2

НА

1

КМАР (number of download sessions)=1

НВ (number of orbit)=4 ТНСН1 5

//////////////////////// ДЛСН1 6 ТНСН2 7

//////////////////////// ДЛСН2 8 ТНСН3 9

//////////////////////// ДЛСН3 10 ///////////////////////////////////// ПКАС ПД /////////// 11


//////////////////

ПРБ

А13

ПРБ

А23

СП3

ПРБ

А12

ПРБ

А22

СП2

ПРБ

А11

ПРБ

А21

СП1 ///// 13

//////////////////////////////////////////////////////////////// НЧК3 НЧК2 НЧК1 14 ПХМ1

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 /////////////////////////////// КМАРР=1 КРНА=1110 1


СДИ* 4 /////////////////////////////////////////////////////////////////////////////////////////////////////// 5



353П-46КС-27895-1105 67

////////////////////////////////////////////

ПВКЗУ



10

00000 00 0 0 0000000 11


МХСМ

МП2 (3)

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1


КРСР КСН

ПМХСМ

НА

3

НА

2

НА

1



//////////////////////// ДЛСН1 6 ТНСН2 7

//////////////////////// ДЛСН2 8 ТНСН3 9

//////////////////////// ДЛСН3 10 ///////////////////////////////////// ПКАС ПД /////////// 11


//////////////////

ПРБ

А13

ПРБ

А23

СП3

ПРБ

А12

ПРБ

А22

СП2

ПРБ

А11

ПРБ

А21

СП1 ///// 13

//////////////////////////////////////////////////////////////// НЧК3 НЧК2 НЧК1 14 ПХМ1

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 /////////////////////////////// КМАРР=1 КРНА=1110 1


353П-46КС-27895-1105 68

СДИ* 4 /////////////////////////////////////////////////////////////////////////////////////////////////////// 5



////////////////////////////////////////////

ПВКЗУ



10

00000 00 0 0 0000000 11


МХСМ

Note: Parameters, used by Pamela and HSRL are marked in thick print.

The other parameters will be assigned as zero.

All commands, sent to Pamela during the second fragment of Pam-

ela/HSRL testing activation, are given in Table 12.

Table 12

Type of com-

mand

Name of com-

mand

Time of the command issue Place from

which the

command

is issued.


CC "Pam power

supply connec-

tion"

t0 – time synchronization of

on-board and testing programs

А11

353П-46КС-27895-1105 69

Type of com-

mand

Name of com-

mand


which the

command

is issued.

CC "PSCU ON

SPARE"

230 s + t0 А11

MCMD Request status

word

350 s + t0 А11

MCMD "Pamela/BCtS

ineraction via

MCL (see table

1)

351 s + t0


MCMD Request status

word

353s + t0 А11

CC "IPM 2 ON" 354 s + t0 А11

CC "IPM 4 ON" 354 s 250 мs + t0 А11

CC "IPM 6 ON" 354 s 500 мs + t0 А11

MCMD Request status

word

355 s + t0 А11

MCMD Request status

word

506 s + t0 А11


MCMD Request status

word

509 s + t0 А11

CC "ND power bus

connection"

А11

CC "ND ON" А11

353П-46КС-27895-1105 70

Type of com-

mand

Name of com-

mand


which the

command

is issued.

CC "ND low voltage

spare"

А11

CC ""ND high volt-

age spare""

А11

MCMD

№17


MCMD

№18

"BITE" 570 s + t0 А11

MCMD

№19


1st download session




MCMD Request CCA А11

MCMD Request ССА 1403 s + t0 А11

2nd download session




MCMD Request ССА А11


MCMD

№20


353П-46КС-27895-1105 71

Type of com-

mand

Name of com-

mand


which the

command

is issued.

MCMD

№21

"Memory con-

figuration"

3630 s + t0 А11

MCMD

№22

"BITE" 3660 s + t0 А11

MCMD

№23


3d download session




MCMD ССА Request А11


MCMD

№24

"Memory con-

figuration"

4620 s + t0 А11

"Nominal deac-

tivation (see ta-

ble 1)

4800 s + t0 А11

Research data are received by Pamela’s GSE according to 4.1.2.1.

353П-46КС-27895-1105 72

Thus during Pamela’s testing activation the following Pamela’s links are

checked: with Resource on-board computer system (by sending MCMD to Pamela

both via MCL line A and line B), with HSRL on-board equipment (by performing

five download sessions with the main and spare channels), with BTMS (by check-

ing TM-parameters with reference values), with BTCS (by sending synchrosignals

via channels 1 and 2), with CRPDS (by sending CC via buses Еок1 and Еок2).

Table 13 gives the order of switching between redundant communication

channels of Pamela and BTCS, CRPDS, HSRL on-board equipment.

Table 13

CC name Check in bus Еок1

Check in bus Еок2

Exchange via MCL

bus A

Exchange via MCL

bus В

Cha

nnel

1

of .

BTC

S

Cha

nnel

2

of

BTC

S

1. Main PSCU on

фр.1 ПВПАМ

фр.1 ПВПАМ

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

2. PSCU off frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

3. Spare PSCU on

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

4. PSCU reset frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

5. IPM 1 on frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

6. IPM1-2 off frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\


PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\


PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

9. IPM 3-4 off frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

353П-46КС-27895-1105 73



Exchange via MCL

bus A

Exchange via MCL

bus В

Cha

nnel

1

of .

BTC

S

Cha

nnel

2

of

BTC

S


PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\


PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

12. IPM 5-6 off frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\


PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

14. Safe mode on

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

15. Safe mode off

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

16. ND on frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

17. ND off frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

18. ND main high voltage

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

19. ND spare high voltage

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

20. ND main low voltage

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

21. ND spare low voltage

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

22. GS on frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

23. GS off frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

24. GS enable frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

353П-46КС-27895-1105 74



Exchange via MCL

bus A

Exchange via MCL

bus В

Cha

nnel

1

of .

BTC

S

Cha

nnel

2

of

BTC

S

25.GS disable frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

26. Pamela power bus on

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

27.Pamela power bus off

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

28.ND power bus on

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

29.ND power bus off

frag.1 of

PAM TA

frag.1 of

PAM TA

\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\\\\ \\\\\\\\

MCDM \\\\\\\\\\\\\\ \\\\\\\\\\\\\\ frag. 1 of PAM TA2

frag. 1, 2 of PAM

TA

\\\\\\\\\\\\ \\\\\\\\

Synchrosignals \\\\\\\\\\\\\\ \\\\\\\\\\\\\\ \\\\\\\\\\ \\\\\\\\\\\ frag.1 of PAM TA

frag.1,2of

PAM TA

2 TA=Testing activation

353П-46КС-27895-1105 75

CD-computer data

inp.- input

ms-marshrut (route start)

TSD-time scale digitization

Figure 6. Time diagram of fragment 6 of Pamela/HSRL testing switch (beginning)

2nd download

session.

УВИД8=43min20s+ tTSD УВИД9=60min+ tОШВ УВИД10=60min30s+ tОШВ

CDА11-2

УВИД7=23min20s+tОШВ

ЖР67 inp.7


А11 inp.1 (on.) RAM prg 13,

input 1

УВИД2=8min 30s+ tОШВ

CD

А11-2

УВИД3=9min10s+ tОШВ А11 in.6 (MCMD

"Select Mode")

УВИД4=9min 30s+ tОШВ

A40 inp.

А11 inp.10

МТ

t0+20min Тнм2

t0+21min t0+40min

t0=tTSD=0

А11 inp.6 (MCMD

"BITE")

УВИД5=10min+tTSD УВИД6=15min+ tОШВ А11 вх.6 (MCMD

"Select mode") Тms1

A11 inp.6 (MCMD

"Select Mode")

Transfer into mode

А0

Transfer into mode А0

Making "imitating model"

A11 inp.6 (MCMD

"Config")

Introduction of memory

module B into operation

353П-46КС-27895-1105 76

Figure 6 Time diagram of fragment 6 of Pamela/HSRL testing switch (end).

CD

А11-2

А11 inp.6 (MCMD

"Mem. Config.")

УВИД16=80min+ tОШВ

Making a simulator

3d download session УВИД12=61 min30s+tОШВУВИ11=61 min+ tОШВ

А11 inp.6 (MCMD

"BITE") А11 inp.6 (MCMD

"Select Mode.")

УВИД13=75min20с+ tОШВ

УВИД15=77min+ tОШВ

Introduction of mem. module A

into operation

А11 inp.2

(0ff)

t0 +72min

T download start3

353П-46КС-27895-1105 77

5. Joint Operation of Pamela and HSRL

During this testing phase operation of Pamela and HSRL on-board equip-

ment will be checked when research data (test data) are being downloaded from

Pamela’s memory into the target data memory of HSRL on-board equipment.

Before joint operation HSRL should be re-activated without warming-up.

Joint operation is performed using RAM program 45 " Pamela ‘s control

during download session", ЖP68, RAM program 13 " HSRL on-board equipment

control during download session " and testing program ОР63 of department 1107.

Pamela’s GSE/HSRL testing equipment is given in Fig.12.

Time diagram is given in Materials of electric and diagnostic tests of HSRL

(353П-46КС-23286-1107).



Pamela is planned to be switched on by A11 program activation via input

1. After four download sessions Pamela is planned to be switched off by A11 pro-

gram activation via input 2.

The first download session is performed with the main adapter in the main

subchannel #19, the second one is performed with the spare adapter in the spare

subchannel #19.

Before each download session (at least 3 minutes before it starts) RAM

program 43 arranges the issue of "BITE” MCMD with the test 16-bit word by acti-

vation of A11 program via input 6. During joint operation with Pamela RAM pro-

gram 43 forms the following initial data for A11 program:


- GV "БЛГС"=1



- GV "ВРБУЗП"=0

- GV "ВРНИЗН"=0

353П-46КС-27895-1105 78

- GV "ВРВЫСН"=0




- GV "КДБЗ"=258;

- GV "НРНД"=0;

- GV "ВРКАН"=0 for download session 1 and =1 for download session

2;

- GV "ВРАДАП=0 for download session 1 and =1 for download session

2;

- GV "ВРИОК=1";

- “Select mode” MCMD (to transfer Pamela into the standby mode);

- "BITE" MCMD.

"BITE" MCMD is given in Table 14.

Table 14.

MCMD "BITE" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter =0

0 MCMD code =8016

MCMD length =7

Time tag (MSB)=0

Time tag (LSB)=0

checksum

TW1=**********;

TW2=**********;

TW3=**********;

TW4=**********.

Test word (TWi)

353П-46КС-27895-1105 79

RAM program 43 forms Memory array 2 for joint operation.

Table 15 shows memory arrays 2 for joint operation of Pamela and HSRL.

МП2 (1) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1


КРСР КСН

ПМХСМ

НА

3

НА

2

НА

1



//////////////////////// ДЛСН1 6 ТНСН2 7

//////////////////////// ДЛСН2 8 ТНСН3 9

//////////////////////// ДЛСН3 10 ///////////////////////////////////// ПКАС ПД /////////// 11


//////////////////

ПРБ

А13

ПРБ

А23

СП3

ПРБ

А12

ПРБ

А22

СП2

ПРБ

А11

ПРБ

А21

СП1 ///// 13

//////////////////////////////////////////////////////////////// НЧК3 НЧК2 НЧК1 14 ПХМ1

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 /////////////////////////////// КМАРР КРНА=1110 1

ДЛМ (duration of download session)=200s 2 ТНМ (time of download start)=900s 3

СДИ* 4 /////////////////////////////////////////////////////////////////////////////////////////////////////// 5



////////////////////////////////////////////

ПВКЗУ



10

00000 00 0 0 0000000 11

353П-46КС-27895-1105 80


МХСМ

МП2 (2)

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1


КРСР КСН

ПМХСМ

НА

3

НА

2

НА

1


НВ (number of orbit)=18 4 ТНСН1 5

//////////////////////// ДЛСН1 6 ТНСН2 7

//////////////////////// ДЛСН2 8 ТНСН3 9

//////////////////////// ДЛСН3 10 ///////////////////////////////////// ПКАС ПД /////////// 11


//////////////////

ПРБ

А13

ПРБ

А23

СП3

ПРБ

А12

ПРБ

А22

СП2

ПРБ

А11

ПРБ

А21

СП1 ///// 13

//////////////////////////////////////////////////////////////// НЧК3 НЧК2 НЧК1 14 ПХМ1

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 /////////////////////////////// КМАРР КРНА=1110 1

ДЛМ (duration of download session)=200s 2 ТНМ (time of download start)=2400s 3

СДИ* 4 /////////////////////////////////////////////////////////////////////////////////////////////////////// 5


СПК2 НПК2 (НМП2) СПК1 НПК1 (НМП1) 8

353П-46КС-27895-1105 81

СПК4 НПК4 (НМП4) СПК3 НПК3 (НМП3) 9

////////////////////////////////////////////

ПВКЗУ



10

00000 00 0 0 0000000 11


МХСМ

Note: Parameters, used by Pamela and HSRL, are marked in thick print.

The other parameters will be assigned as “zero”.

All commands, sent to Pamela during joint operation, are given in Table

16.

Table 16. Commands, sent to Pamela during joint operation.

Type of com-

mand

Name of com-

mand


where the

command

is issued


CC "Pam power bus

connection"

t0 – time synchronization of

on-board and testing programs

А11

CC "PSCU ON

MAIN"

230 s + t0 А11

MCMD request status

word

350 s + t0 А11

353П-46КС-27895-1105 82

Type of com-

mand

Name of com-

mand


where the

command

is issued

MCMD "Checkout of

Pam/HSRL in-

teraction via

MCL" (see table

1)

351 s + t0


MCMD request status

word

353s + t0 А11

CC "IPM 1 ON" 354 s + t0 А11

CC "IPM 3 ON" 354 s 250 мs + t0 А11

CC "IPM 5 ON" 354 s 500 мs + t0 А11

MCMD request status

word

355 s + t0 А11

MCMD request status

word

506 s + t0 А11

MCMD request status

word

508 s + t0 А11

MCMD request status

word

509 s + t0 А11

CC "MD power

supply bus con-

nection"

А11

CC "ND ON" А11

353П-46КС-27895-1105 83

Type of com-

mand

Name of com-

mand


where the

command

is issued

CC "ND low voltage

main"

А11

CC "ND high volt-

age main"

А11

MCMD

№25


MCMD

№26


MCMD

№27

"BITE" 570 s + t0 А11

1st download session




MCMD ССА request А11

MCMD ССА request 1103 s + t0 А11

MCMD

№28

"BITE" 1200 s + t0 А11

2nd download session




MCMD ССА request А11

MCMD ССА request 2603 s + t0 А11

353П-46КС-27895-1105 84

Type of com-

mand

Name of com-

mand


where the

command

is issued

"Pamela nomi-

nal deactivation"

(see table 1)

4800 s + t0 А11

Research data are received by Pamela’s GSE according to 4.2.1.1, but

HSRL testing equipment takes data from the nominal output of HSRL on-board

equipment.

353П-46КС-27895-1105 85

Pamela

ХР5 ХР6

HSRL OBE FTD

(Size = 20

Gbyte)

100 m

Pamela’s

GSE

HSRL GTE

Figure 7 Layout of Pamela’s GSE and HSRL GTE

during joint operation.

353П-46КС-27895-1105 86

6. INTEGRATED TESTS OF PAMELA

During integrated tests all initial data for Pamela are assigned in the opera-

tional program.

Pamela’s participation in the integrated tests of “Resource-DK” SC implies

the following items:

1) Before the beginning of the first mode Р10 Pamela is switched on

nominally (by activation of A11 program via input 1 from the operational pro-

gram);

2) After finishing the activation process (at least 550 seconds after A11 ac-

tivation via input 1) the following MCMDs are sent to Pamela:

- №29 MCMD “Select Mode” (1) to transfer Pamela into the stand –by

mode (for this purpose MCMD “Select Mode” should be included into RAM

area of A11 program, starting with the GV”MCMD.CODE5”, A11 program

should be activated by input 6),

- №30 “BITE”MCMD to fill Pamela’s memory with test data (for this

purpose MCMD "BITE" should be included into RAM area of A11 program,

starting with the GV ”MCMD.CODE5”, A11 program should be activated by

input 6).

- 10 seconds later №31 MCMD “Select Mode” (2) to make the imitat-

ing model in Pamela’s memory (for this purpose MCMD “Select Mode”

should be included into RAM area of A11 program, starting with the GV

”MCMD.CODE5”, A11 program should be activated by input 6).

3) Between 5 and 10 min later Pamela participates in the first download

session with HSRL OBE in the first mode P10 (by activation of program A11via

input 10 from program Р10), download session lasts 200 seconds;

4) When the first download session is finished (10 seconds later), the fol-

lowing MCMD are sent to Pamela:

- №32 MCMD “Select Mode” (3) to make the imitating model in Pam-

ela’s memory (for this purpose MCMD “Select Mode” should be included into

353П-46КС-27895-1105 87

RAM area of A11 program, starting with the GV ”MCMD.CODE5”, A11 pro-

gram should be activated by input 6).

- 3 min. after the first download session №33 MCMD “Select Mode”

(4) is issued with to transfer Pamela into particle registration mode (for this

purpose MCMD “Select Mode” should be included into RAM area of A11

program, starting with the GV ”MCMD.CODE5”, A11 program should be acti-

vated by input 6).

- 2 to 5 minutes after issue of MCMD according to item 4) №34

MCMD “Select Mode” (5) is issued with the initial data to calibrate Pamela

(for this purpose MCMD “Select Mode” should be included into RAM area of

A11 program, starting with the GV ”MCMD.CODE5”, A11 program should be

activated by input 6).

- 10 seconds later “Calibrate” MCMD №35 is issued (by activation of

A11 program via input 37)

5) Between 1 and 2 hours later Pamela participates in the second

download session with HSRL OBE (in the 3d mode P10), download session

lasts 200 seconds.

6) Pamela is switched off nominally (by activation of program

A11 via input 2 from the operational program).

The following initial data should be formed before A11 program activation

via input 1:

-GV "ЗВРПК"=1;


- GV "КДБЗ"=258;






353П-46КС-27895-1105 88

- GV "НРНД"=0;

- GV "БЛГС"=0.

5 “Select Mode” MCMDs, “BITE” MCMD, formed for Pamela during in-

tegrated tests are given in Table 17.

Table 17

MCMD "Select Mode" (1) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code= 3316

MCMD length=?

Time tag (MSB)=0

Time tag (LSB)=0

checksum

MCMD "Select Mode" (2) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code = 3316

MCMD length =?

Time tag (MSB)=0

Time tag (LSB)=0

checksum

MCMD "Select Mode" (3)

353П-46КС-27895-1105 89

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code = 3316

MCMD length =?

Time tag (MSB)=0

Time tag (LSB)=0

checksum

MCMD "Select Mode" (4) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code = 3316

MCMD length =?

Time tag (MSB)=0

Time tag (LSB)=0

checksum

MCMD "Select Mode" (5) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code = 3316

MCMD length =?

Time tag (MSB)=0

Time tag (LSB)=0

353П-46КС-27895-1105 90

checksum

MCMD"BITE" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MCMD counter=0

0 MCMD code=8016

MCMD length =7

Time tag (MSB)=0

Time tag (LSB)=0

checksum

The following initial data should be formed before activation of A11 pro-

gram via input 10 (in the first and the third modes P10):

- GV "ВРКАН"=0;

- GV "ВРАДАП"=0;

- GV "ВРИОК=1".

Subarrays of route (marshrut) characteristics should be formed too with

КРНА (code of Pamela’s operation)=168, marshrut length=200s, time of marshrut

start, number of marshrut (download session) in orbit.

Additions will be put to data of table 17.

ЖР69 testing program should be activated by inputs:

- by input 1 to check Pamela’s temperature parameters. In case of anom-

aly in any of these parameters ЖР69 program forms GV

"ННТМПП"=1 (anomaly in Pamela’s temperature parameters) for the

planning program КР18. Time of ЖР69 program operation by input 1

does not exceed 3 minutes.

Test word

353П-46КС-27895-1105 91

- by inputs 2 and 3 to control Pamela’s switching on and off. Time of

ЖР69 program operation by input 2 does not exceed 10 minutes. Time

of ЖР69 program operation by input 3 does not exceed 1 minute.

- by input 4 for periodic control of Pamela’s status throughout the whole

activation (between modes P10). Time of ЖР69 program operation by

input 4 does not exceed 4 minutes.

Pamela’s GSE receives research data according to 4.2.1.1, but HSRL GTE

takes data from the nominal HSRL output.

353П-46КС-27895-1105 92

7. AMOUNT OF PAMELA’S RETESTING AFTER REPLACEMENT OF

ITS COMPONENTS OR REPLACEMENT OF “RESOURCE DK” SC

SUPPORT SYSTEMS

After replacement of Pamela’s components as well as “Resource DK” SC

systems or units, connected with Pamela, test activation using “Resource DK” SC

support systems should be repeated within the following amount:

- for replacement of on-board computer system, CRPDS, BDTS, BTCS –

fragment 1 of Pamela’s test activation;

- for replacement of HSRL – fragment 6 of Pamela’s test activation with

HSRL;

- for replacement of Pamela’s components – full Pamela’s test activation

and full Pamela’s test activation with HSRL;

353П-46КС-27895-1105 93

8. Estimation of operating time

Automated estimation of Pamela’s operating time in hours is made by signalling

parameter "ПИТ ПАМ" (Pamela’s power supply) by summation of times when

this parameter is in the closed status.

Estimation of the number of Pamela’s activations is also made by signaling

parameter "ПИТ ПАМ" (Pamela’s power supply) by summation of the number of

closures of this parameter.

353П-46КС-27895-1105 94

9. ORDER OF PAMELA’S ACTIVATION, DEACTIVATION AND RE-

SET

Before Pamela’s activation make sure that all Pamela’s connectors are

mated nominally, besides display "PAM CMC" shall be highlighted on the central

operator's desk.

Activation of the hardware during TA with support systems of 'Resource-

DK1" SC (PAM TA and PAM/HSRL TA) and also during JO and IT is executed

by nominal program А11 (except the first two activations of Pamela in fragment

1). Prior to activation of Pamela the following support systems of 'Resource-DK1"

SC shall be connected and ready for work: BCtS, CRPDS, BDTS in modes ЗАП4,

ПрБ1, BTCS, HSRL OBE (if necessary).

Pamela is completely deactivated during nominal operation under CC "OFF

PSCU", issued by program А11.

If emergent deactivation of Pamela is required, the following CC sequence

shall be issued:

"IPM 1-2 off", " IPM 3-4 off", " IPM 5-6 off", "PSCU off", "ND off", "GS

off", "GS stand-by", "ND power bus off", "Pamela’s power bus off".

In emergent power cut off from 'Resource-DK1" SC it is necessary to initi-

ate test program ЖР67 in input 6 after power restoration to issue the above com-

mands. Then work with "Pamela" RH in normal mode of operation.

Initial condition of "Pamela" RH is regarded as its deactivated condition it

is in after nominal deactivation of Pamela. Initial condition of "Pamela" RH pa-

rameters of signal transfer is as follows:

"PAM P"=0, "ND"=0.

353П-46КС-27895-1105 95

353П-46КС-27895-1105 96

SOTC-special one-time command

Figure8 Time diagram of fragment 2 of Pamela’s test activation.

А11 inp. 6

ЖР67 inp.1 t0=tCTS=0

MC

MD

"Se

lect

Mod

e"(А

2)

ЖР67 inp.2

RAM prg 42

МТ

А11 inp.1

Pam in

mode. В4

А11 inp. 6

УВИД1=9 min+tОШВ УВИД2=10min+tОШ УВИД3=15min+tОШВ

MC

MD

"D

UM

P"

MCMD "PATCH" MCMD "DUMP"

УВИД4=18 min +tОШВ УВИД5=19 min +tОШВ УВИД6=20 min +tОШВ

SOTC to downlink

RAM

А11in.15

MC

MD

"R

ESET

HIS

TOR

Y

AR

EA"

А11 inp. 2(0ff)

History area

pick-up

УВИД7=22 min +tОШВ УВИД8=23 min +tОШВ

History area pick-up

А11 inp. 6

А11 inp.6 А11 inp.6 А11 inp.15 А11 inp15

УВИД9=25 min +tОШВ А11 inp.6

А11 inp.15

УВИД10=40 min +tОШВ

РР84 inp.4

t0+18 min ON CF and

establish-

ment of

t0+22min. downlink off

РР84 inp.5

SOTC62 SOTC112

УВИД=3s+tОШВ A40 inp.1

MT3

t0+26min.

353П-46КС-27895-1105 97

Figure 10 Time diagram of fragment 4 of Pamela’s test activation.

ЖР67 inp.3 А11 inp.1 (On)

ПрОЗУ42

МТ УВИД1=3s+tошв

УВИД2=540s+tошв УВИД3=662s+tошв УВИД4=7ч 662s+tошв

А11 inp.6 А11 inp.6

TRD purg-

ing

30s 120s

А0 mode

А11 inp.2

(Off)

Сброс

давлеия

А11 inp.6 420s

УВИД5=7ч1083s+ tошв

ЖР67 inp.3

А11 inp.1 (On)A40 inp.1

МТ

t0=tошв=0

УВИД2=540s+tошв УВИД3=662s+tошв

А11 inp.2

(Off)


А11 inp.6 А11 inp.6

TRD

purging

PC jettison-

ing

30s 120s

Mode А0

А11 inp.6

420s

60s

УВИД5=1145s+ tошв

Figure 9 Time diagram of fragment 3 of Pamela’s test activation.

УВИД=3s+tошв

ЖР67 inp.1

A40 inp.1

t0=tошв=0

ПрОЗУ 42 ЖР67 inp.1

CC ""GS stand-by on"

(t0+520s)

CC ""GS stand-by on"

(t0+520s)

MARCO - wischnew/pamela/internal/daq/...353П-46КС-27895-1105 1 Approved Deputy General Designer of TsSKB _____ G. E. Fomin "___"_____ 2003 Materials on electrodiagnostic tests of

Documents

MARCO - wischnew/pamela/internal/daq/...353П-46КС-27895-1105 1 Approved Deputy General Designer of TsSKB ___ G. E. Fomin "_"_____ 2003 Materials on electrodiagnostic tests of