MADE IN ITALY
M A D E I N I T A L Y
Smartwood srl has a long-standing experience in
designing and manufacturing pellet mills and pellet
production equipment, aimed at transforming different
types of raw material into pellets.
• Biomass: wood chips, wood shavings, sawdust,
wood waste
• Feed
• Livestock manure, poultry manure, etc. ...
• Feed supplement
• Herbs, lucerne
• Any product that can be densified through the
pelleting process
OUR MISSION
Smartwood aims to promote pellet production lines
tailor-made to fit customers' needs.
The goal is to distribute the finished product directly to
the end customer, thus avoiding all the steps that
impoverish the profit.
The purpose is to obtain the maximum economic gain
against significantly lower investments than all
competitors.
OUR SERVICES
• Training on pelletization
techniques at our company
• Pre- and post-sale service and
technical expertise
• Pelletizing tests at our
company
• Components and spare parts
immediately available
• Wide range of dies of various
compressions in stock
• Technical office providing
customized layouts and
solutions
• Reconditioning and updating of
machines at our company
• Friendliness and courtesy
PRODUCT PORTFOLIO
1
PELLET MILLS FOR HOME USE
PLT-50 Electrical Single-Phase Pellet Mill
Power supply Electrical single-phase
Installed
power
3 kW
Approx. hourly
production * Depending on the material
Pellet
diameter 6 mm
Die diameter 119 mm
Roller
diameter
2 rollers 78 mm diam. (working
surface approx.39 mm)
Dimensions
(LxWxH) 87 x 39 x 106 cm
Weight 110 kg
PLT-100 Electrical Three-Phase Pellet Mill
Power supply Electrical three-phase
Installed
power
4 kW
Approx. hourly
production * Depending on the material
Pellet
diameter 6 mm
Die diameter 119 mm
Roller
diameter 2 rollers 78 mm diam.
Dimensions
(LxWxH) 87 x 39 x 106 cm
Weight 110 kg
* Hourly production considerably varies according to the type of biomass used. Estimated data
contained in this catalogue are purely indicative and not binding in any way.
PRODUCT PORTFOLIO
2
PLT-100 PTO Pellet Mill with Power Take-Off Attack
Power supply PTO
Required
driving force
6 hp
Approx. hourly
production* Depending on the material
Pellet
diameter 6 mm
Die diameter 119 mm
Roller
diameter 2 rollers 78 mm diam.
Dimensions
(LxWxH) 67 x 77 x 121 cm
Weight 93 kg
PLT-100 M Pellet Mill with Gasoline Internal Combustion Engine
Power supply: Gasoline internal combustion
engine
Installed
power: 14 hp
Approx. hourly
production* Depending on the material
Pellet
diameter 6 mm
Die diameter 119 mm
Roller
diameter 2 rollers 78 mm diam.
Dimensions
(LxWxH) 87 x 39 x 106 cm
Weight 110 kg
* Hourly production considerably varies according to the type of biomass used. Estimated data
contained in this catalogue are purely indicative and not binding in any way.
PRODUCT PORTFOLIO
3
WOODSTOCK BIO-SHREDDERS
Power supply PTO
Installed power 18 hp
Max. branches’
diam. 70 mm
Feed hopper
dimensions 35 x 40 cm
PTO rotation 540 RPM
Dimensions
(LxWxH)
134 x 83 x
106 cm
Weight 106 kg
Power supply Petrol engine
Engine HONDA GX200
Engine power 6,5 hp
Max.
branches’
diam.
60 mm
Feed hopper
dimensions 35 x 40 cm
Dimensions
(LxWxH) 134 x 83 x 106 cm
Weight 92 kg
Power supply Electrical, three-
phase
Installed
power
3 kW
Max.
branches’
diam.
40/50 mm
Feed hopper
dimensions 35 x 40 cm
Dimensions
(LxWxH) 134 x 83 x 106 cm
Weight 87 kg
WOODSTOCK 3PH WOODSTOCK PTO WOODSTOCK ENGINE
PRODUCT PORTFOLIO
4
SEMI-PROFESSIONAL PELLET MILLS
PLT-400 Electrical Three-Phase Pellet Mill
Power supply Electrical three-phase
Installed
power
22 kW
Approx. hourly
production* Depending on the material
Die hole
diameter** Usually 6 mm
Die diameter 225 mm
Roller
diameter 4 rollers 90 mm diam.
Dimensions
(LxWxH) 153 x 70 x 130 cm
Weight 600 kg
PLT-400 PTO Pellet Mill with Power Take-Off
Power supply PTO
Driving force
required
> 60 hp
PTO attack Category 2
Approx. hourly
production* Depending on the material
Die hole
diameter** Usually 6 mm
Die diameter 225 mm
Roller
diameter 4 rollers 90 mm diam.
Dimensions
(LxWxH) 100 x 130 x 147
Weight 436 kg
* Hourly production considerably varies according to the type of biomass used. Estimated data
contained in this catalogue are purely indicative and not binding in any way.
** Die hole diameter can vary according to customer’s needs.
PRODUCT PORTFOLIO
5
PLT-800 Electrical Three-Phase Pellet Mill
Power supply Electrical
Installed
power
37 kW
Approx. hourly
production* Depending on the material
Die hole
diameter** Usually 6 mm
Die diameter 225 mm
Roller
diameter 4 rollers 90 mm diam.
Dimensions
(LxWxH) 174 x 89 x 152 cm
Weight 840 kg
PROFESSIONAL PELLET MILLS
PLT-1000 Electrical Three-Phase Pellet Mill
Power supply Electrical three-phase
Installed
power
45kW
Approx. hourly
production * Depending on the material
Die hole
diameter** Usually 6 mm
Die diameter 398 mm
(working surface 360 mm)
Roller
diameter 2 rollers 180 mm diam.
Dimensions
(LxWxH) 181 x 96 x 152 cm
Weight 950 kg
* Hourly production considerably varies according to the type of biomass used. Estimated data
contained in this catalogue are purely indicative and not binding in any way.
** Die hole diameter can vary according to customer’s needs.
PRODUCT PORTFOLIO
6
LOADERS & DISPENSERS
CRT-50 Biomass Dispenser
CRT-100 Biomass Loader
Characteristics
Starch dispenser/ biomass loader
that can be used:
- to feed our domestic pellet
mills of 100 series
- to add and meter starches
(e.g. corn flour)
Materials are moved by means of a screw feeder. Biomass
metering’s control through a motor
inverter with potentiometer.
Power supply Electrical single-phase
Installed
power 0,25 kW
Max volume Approx. 0,25 m3
Dimensions
(LxWxH) 150 x 90 x 190 cm
Weight 85 kg
Characteristics
Biomass loader with screw feeder,
essential to feed our domestic,
semi-professional and
professional pellet mills.
Power supply Electrical single-phase
Installed
power
Electrical single-phase motor
inverter 0,55 kW
Screw feeder 0,25 kW
Max volume Approx. 0,8 m3
Dimensions
(LxWxH) 325 x 72 x 210 cm
Weight 145 kg
PRODUCT PORTFOLIO
7
CRT-200 Biomass Loader + RC-400 Refiner Mill
CRT-200
RC-400
IRON REMOVER
Characteristics
Biomass loader with screw feeder,
essential to feed our domestic,
semi-professional and
professional pellet mills. Set up for
aspiration.
Opening inspection door with
protection grid.
Power supply Electrical single-phase
Installed
power
Electrical single-phase motor
inverter 0,55 kW
Screw feeder 0,25 kW
Max volume About 0,4 m3
Dimensions
(LxWxH) About 325 x 72 x 210 cm
Weight 145 kg
Grid diameter
(mm)
Several dimensions available on
request
Max.
granulometry
of the material
Production considerably varies
according to the type of biomass
used and to its dimension
Power supply Electrical three-phase with motor
protection
Installed
power 11 kW
Refining
system Rotor with knives or hammers
Number of
knives 96
Dimensions
(LxWxH) About 147 x 117 x 147 cm
Weight 235 kg
Characteristics
Iron remover with magnets and
stainless-steel support that can be
opened to remove ferrous bodies.
It is incorporated into the refiner
mill hopper.
PRODUCT PORTFOLIO
8
REFINER MILLS
RC-1000 Refiner Mill
RC-400 Refiner Mill*
* Mounted on CRT-100 or CRT-200
Grid diameter
(mm) Different measures available
Max.
granulometry
of the material
Wood chip max. size approx.4 cm
Production considerably varies
according to the type of biomass
used and to its dimension
Power supply Electrical three-phase
Installed
power 22 kW
Refining
system Rotor with knives
Number of
knives 150
Dimensions
(LxWxH) 165 x 68 x 186 cm
Weight 354 kg
Grid diameter
(mm)
Several dimensions available on
request
Max.
granulometry
of the material
Wood chip max. size approx.1 cm
Production considerably varies
according to the type of biomass
used and to its dimension
Power supply Electrical three-phase (electrical
panel excluded)
Installed
power 11 kW
Refining
system Rotor with knives/hammers
Number of
knives 80
Dimensions
(LxWxH) 147 x 117 x 147 cm
Weight 235 kg
PRODUCT PORTFOLIO
9
BIOMASS EXTRACTOR
ECP-3000 Biomass Extractor*
Characteristics
Extractors for sawdust or wood
chips controlled by IP66 vector
inverter
• Rotating axis with leaf springs
in harmonic steel
• Extracting cochlea for material
metering
• Electrical panel with protections
Power supply Electrical three-phase
Installed
power
Rotating axis: 3 kW
Extracting screw feeder: 2,2 kW
Capacity 8-10 m3
Cochlea diam. 200 mm
Dimensions
(LxWxH) 2,2 m x 4,2 m x 3,2 m
Weight 516 kg
ECP-2000 Biomass Extractor*
Characteristics
Extractors for sawdust or wood
chips controlled by IP66 vector
inverter
• Rotating axis with leaf springs in
harmonic steel
• Extracting screw feeder for
material metering
• Electrical panel with protections
Power supply Electrical three-phase
Installed
power
Rotating axis: 0,75 kW
Extracting screw feeder: 0,75 kW
Agitator hopper extractor: 0.25 kW
Capacity 1,5 m x 2,8 m x h 2,6 m
Cochlea diam. 3-4 m3
Dimensions
(LxWxH) 150 mm
Weight 360 kg
* double screw feeder version also available
PRODUCT PORTFOLIO
10
ECP-2000L Biomass Extractor + CRT25 Biomass Dispenser
ECP-2000L
Characteristics
Extractors for sawdust or wood
chips controlled by IP66 vector
inverter
• Rotating axis with leaf springs in
harmonic steel
• Extracting cochlea for material
metering
• Electrical panel with protections
Power supply Electrical three-phase
Installed
power
Rotating axis: 0,75 kW
Extracting screw feeder: 0,75 kW
Predisposition for agitator hopper
extractor: 0.25 kW
Dimensions
(LxWxH) About 1,5 m x 3,3 m x h 2,6 m
Capacity 3-4 m3
Screw feeder
diam. 160 mm with variable pitch
CRT-25
Characteristics
Starch dispenser/ biomass loader
that can be used to add and meter
starches (e.g. corn flour).
It comes with protection grid and
cover for material loading.
Materials handling occurs through
screw feeder. Biomass metering’s
control through a motor inverter
with potentiometer.
Power supply Electrical single-phase
Installed
power 0,25 kW
Max volume About 0,25 m3
Dimensions
(LxWxH) About 150 x 90 x 190
Weight 85 kg
PRODUCT PORTFOLIO
11
CONVEYOR BELTS*
NT4X250S Conveyor Belt for Wood Chips
Characteristics
Conveyor belt for wood chips or
sawdust loading. With wheels and
adjustable in height.
Power supply Electrical single-phase
Installed
power 1 kW
Dimensions
Length 4 linear metres
Width 250 mm
Adjustable height
Speed 0,25 m/s
Weight 195 kg
NT4X300 ET TM Conveyor Belt under Pellet Mill
Characteristics
Conveyor belt with modified
hopper for pellet loading into the
cooler
Power supply Electrical three-phase
Installed
power 0,75 kW
Speed 0,15 m/s
Dimensions Length 4 linear metres
Width 300 mm
Weight 125 kg
* Customized conveyor belts available on demand
PRODUCT PORTFOLIO
12
NT4X400 ET TM Conveyor Belt for Bagging Machine
Characteristics Conveyor belt for bagging
machine PKG-1000
Power supply Electrical three-phase
Installed
power 0,75 kW
Speed Related to PKG-1000 speed
Dimensions
Length 4 linear metres
Width 400 mm
Weight 152 kg
NT3X300 ET TM Conveyor Belt under Pellet Press
Characteristics Conveyor belt for pellet loading
into the vibrating screen.
Power supply Electrical three-phase
Installed
power 0,75 kW
Speed 0,15 m/s
Dimensions
Length 3 linear metres
Width 300 mm
Weight 143 kg
NT4X300 ET Conveyor Belt for Big Bags
Characteristics Conveyor belt for final product
loading and for big-bag filling.
Power supply Electrical three-phase
Installed power 0,75 kW
Speed 0,15 m/s
Dimensions Length 4 linear metres
Width 300 mm
Weight 144 kg
PRODUCT PORTFOLIO
13
FILTER UNITS
FILTRO-32 RAF Filter Unit for RC-1000 Mill or Dust
Recovery
Characteristics
Filter unit for dust suction and
recovery. It comes with a cleaning
system consisting of an electrical
vibrator that allows the automatic
shaking of filter bags. The
electrical vibrator is manually
operated at the end of the
production process.
Power supply Electrical three-phase
Installed
power Electric vibrator 0,18 kW
No. of bags 32 cotton filter bags Ø 200 mm H
180 cm
Dimensions
(LxWxH) 100 x 200 x 380 cm
Weight 250 kg
FILTRO-12 Filter Unit with 12 Filter Bags
Characteristics
- Filter unit for dust suction
and recovery. It comes
with self-cleaning system
for the automatic shaking
of the filter bags and
electrical panel for manual
actuation. It comes with an
integrated aspirator and 4-
way suction attacks Ø 100
mm
Power supply Electrical three-phase
Installed
power
Electric vibrator 0,18 kW
Aspirator electrical three-phase 3
kW engine
No. of bags 12 cotton filter bags Ø 200 mm H
180 cm
Dimensions
(LxWxH) 140 x 240 x 340 cm
PRODUCT PORTFOLIO
14
FILTRO-48 Filter Unit with 48 Filter Bags
ASP400-1500 Single-Phase Filter Unit with 2 Filter Bags
Characteristics Filter unit for suction and recovery
of dust from the pellet mill.
Power supply Electrical single-phase
Installed
power 1500 W
No. of bags 2 cotton filter bags Ø 100
Weight 47 kg
Characteristics
Filter unit for dust suction and
recovery. It comes with a cleaning
system consisting of an electrical
vibrator that allows the automatic
shaking of filter bags. The
electrical vibrator is manually
operated at the end of the
production process.
Power supply Electrical three-phase
Installed
power
Electric vibrator 0,18 kW
No. of bags 48 cotton filter bags Ø 200 mm H
180 cm
Dimensions
(LxPxH) 100 x 300 x 380 cm
Weight 375 kg
PRODUCT PORTFOLIO
15
BAGGING MACHINES
PKG-1000 Semi-Automatic Bagging Machine
Characteristics
Semi-automatic bagging with feed
hopper for material loading and
conveyor belt for material
handling. Net weight scale with
weighing cells. Unloading of pre-
weighed material through
pneumatic valve
Power supply Electrical, three-phase
Installed
power 1,55 kW
Unloading
time of pre-
weighed
material
Approx. 3 sec.
Sack weight Potentiometer allowing to set ideal
weight (kg)
Weighing
range 50 gr
Language Software available in several
languages
Dimensions 113 x 131 x 240
Weight 300 kg
66F650X1 Thermo Welding Machine
Characteristics Thermo welding machine with
pedal 1 resistance
Length 600 mm
Welding 10 mm
Power 800 W
Dimensions 70 x 57 x 880 cm
Weight 28 kg
PRODUCT PORTFOLIO
16
Kit Umidificatore Humidification Kit
Characteristics
Humidification pump for raw
material. Air-powered. It comes
with:
- 1m3 tank
- Interchangeable vaporizing
nozzle
Power supply Compressed air
Tank
dimensions 1m3
DFM-500 Iron Remover
Characteristics
Iron remover with 2 neodymium
magnets and stainless-steel
support for belt conveyor
VBR-300 Vibrating Screen
Characteristics
Vibrating screen with n. 2
vibrators 0,26 kW with manual
valve for regulation pellet
unloading and interchangeable
sieve with different Ø
Power supply Electrical, three-phase
Installed
power 0,52 kW
Volume 0,1 m3
Dimensions
(LxWxH) 175x80x110
Weight 150 kg
PRODUCT PORTFOLIO
17
PKG-VBR Vibrating Screen Bagging Machine
RPL-1000 Pellet Cooling System
Characteristics
Pellet cooling system including:
- Loading hopper
- No. 2 proximity sensors to
maintain the level of the product
within the tank
- Manual release button
- Star valve hourly output 400 l/h
- Electrical panel with
potentiometer
Power supply Electrical, three-phase
Installed
power Star valve 0,75 kW
Weight 300 kg
Characteristics
Vibrating screen with n. 2
vibrators 0,26 kW with manual
valve for regulation pellet
unloading and interchangeable
sieve with different Ø
Power supply Electrical, three-phase
Installed
power 0,52 kW
Volume 0,1 m3
Dimensions
(LxWxH) 175x80x110
Weight 150 kg
Rialzo VBR-300 Support with legs for vibrating screen
PKG-VBR Manual bagging machine with scale, viewer, pneumatic actuator with pedal control for product unloading, electrical panel with 380V 3P+N +T protection
PRODUCT PORTFOLIO
18
RPL-1000 ASP Pellet Cooling System with Suction
Device
Characteristics
Pellet cooling system with suction
device including:
- Loading hopper
- No. 2 proximity sensors to
maintain the level of the product
within the tank
- Manual release button
- Star valve hourly output 400 l/h
- Electrical panel with
potentiometer
Power supply Electrical, three-phase
Installed
power
Star valve 0,75 kW
Suction device 2,2 kW
Weight 330 kg
RPL-2000 Pellet Cooling System
Characteristics
Pellet cooling system for double
line including:
- Loading hopper
- No. 2 proximity sensors to
maintain the level of the product
within the tank
- Manual release button
- Star valve hourly output 400 l/h
- Electrical panel with
potentiometer
Power supply Electrical, three-phase
Installed
power Star valve 0,75 kW
Weight 320 kg
PRODUCT PORTFOLIO
19
BIG-100 Big-Bag Holding Structure for Pellet Line
Characteristics
Steel structure with chains and
hooks for big bag support.
Adjustable height
BIG-1000-1 Big-Bag Holding Structure for Bagging Machine
Characteristics Steel structure with a hole for big
bags.
Accessories
Vibrating screen
Raised support for big bag
discharge on the conveyor belt
powered by the bagging machine.
PRODUCT PORTFOLIO
20
PMP-100 e PMP-100 PTO Grease Dispenser Cart
PMP-100
Characteristics
Grease dispenser cart complete
with volumetric pump for
regulation of grease quantity
Power supply Compressed air (4 bar)
PMP-100 PTO
Characteristics
Grease dispenser cart for PTO
pellet mill complete with electric
panel and volumetric pump for
regulation of grease quantity
Power supply Compressed air (4 bar)
S3 460-18 Grease Can for Lubrication
Characteristics
Grease can for lubrication of
pressure rollers / central bearing.
Product technical data sheet
available on request
Peso 18 kg
KIT TUBI RC-1000 RC-1000 Pipes Kit
Characteristics
Zinc-coated pipes 150 for
connection RC-800 to separating
cyclone CRT-100. Complete with
bent pipes and regulation valves.
Dimensions Diameter 150 mm
PRODUCT PORTFOLIO
21
KIT RECUPERO POLVERI Dust Recovery Kit
KIT MODIFICA CRT-100 CRT- 100 Modification Kit
Characteristics
Modification kit:
- Separating cyclone diameter 600
mm
- Star valve hourly output 400 l/h
- Suction device
- Support for CRT-100 biomass
loader
Power supply Electrical three-phase
Installed
power
Star valve 0,75 kW
Suction device 5,5 kW
KIT TUBI RECUPERO POLVERI Dust Recovery Pipe Kit
Characteristics
Zinc-coated connection pipes for
dust recovery of pellet press,
vibrating screen and cooling system
including bent pipes and regulation
valves
Dimensions Diameter 150 mm
Characteristics
The dust recovery kit includes:
- Cyclone 600 diameter
- Star valve with 400 l/h hourly
output
- Aspirator
Power supply Electrical, three-phase
Installed
power
Star valve 0,75 kW
Aspirator 5,5 kW
PRODUCT PORTFOLIO
22
PELLET PRODUCTION LINES
Minimal Line with PLT-400 + CRT-100
Semi-Automatic Bagging Station
1 Big-1000 Support 2 VBR-300 3 NT4x300 4 PKG-1000
1
2
3
4
PRODUCT PORTFOLIO
1 ECP-2000
2 CRT-50
3 NT4X250S
4 RC-400
5 CRT-100
6 PLT-400
7 Filter Unit 12
8 Humidification Kit
9 Iron Remover
Compact Line with Pellet Mill PLT-400
1
2 3
4
5
6
7
8
9
LxPxH: 8,5x4,15x3,5 m
PRODUCT PORTFOLIO
1 ECP-2000 L
2 CRT-25
3 CRT-200
4 PLT-400
5 Filter Unit 12
6 Humidification Kit
Super-Compact Line with Pellet Mill PLT-400
1
2
3
4
5
6
LxPxH: 6,5x4,2x3,5 m
PRODUCT PORTFOLIO
1 ECP-2000 8 RPL-1000
2 CRT-50 9 VBR-300
3 NT 4x250S 10 NT 4x300 ET
4 RC-400 11 Big100 Support
5 CRT-100 12 Filter Unit 12
6 PLT-800 13 Humidification Kit
7 NT 4x300 ET TM 14 Iron Remover
Compact Line with Pellet Mill PLT-800
1
2
3
4
5
6
7
8
9 10
11
12
13
14
LxPxH: 11,9 x 5,7 x 3,5 m
PRODUCT PORTFOLIO
1 ECP-2000 L 7 VBR-300
2 CRT-25 8 NT 4x300 ET
3 CRT-200 9 Big100 Support
4 PLT-800 10 Filter Unit 12
5 NT 4x300 ET TM 11 Humidification Kit
6 RPL-1000
Super-Compact Line with Pellet Mill PLT-800
1
2
3
4
5
6
7 8
9
10
11
LxPxH: 9,9 x 5,7 x 3,5 m
PRODUCT PORTFOLIO
1 ECP-2000 L 7 VBR-300
2 CRT-25 8 NT 4x300 ET
3 CRT-200 9 Big100 Support
4 PLT-1000 10 Filter Unit 12
5 NT 4x300 ET TM 11 Humidification Kit
6 RPL-1000
Super-Compact Line with Pellet Mill PLT-1000
1
2
3
4 5
6
7
8
9
10
11
LxPxH: 10 x5,7 x 3,5 m
PRODUCT PORTFOLIO
1 ECP-3000 10 VBR-300
2 CRT-50 11 NT 4x300 ET
3 NT 4x250S 12 Big 100 Support
4 RC-1000 13 Filter Unit 32
5 CRT-100 14 Iron Remover
6 Modified Kit CRT-100 15 Dust Recovery Kit
7 PLT-1000 16 Dust Recovery Pipe Kit
8 NT 4x300 ET TM 17 Humidification Kit
9 RPL-1000
Complete Line with Pellet Mill PLT-1000
1
2
3
4
5
7
8
9
10
11
12
13
13
6
14
15
16 17
LxPxH: 12,5 x 7,5 x 4 m
PRODUCT PORTFOLIO
1 ECP-3000 L 9 NT 4x300 ET
2 RC-1000 10 Big 1000 Support
3 CRT-100 (x2) 11 Filter Unit 48 (x2)
4 Modified Kit CRT-100 (x2) 12 Dust Recovery Pipe Kit (x2)
5 PLT-1000 (x2) 13 Dust Recovery Kit (x2)
6 NT 5x400 ET TM 14 Humidification Kit
7 RPL-2000 15 Iron remover
8 VBR-300
Double Line with Pellet Mill PLT-1000
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
LxPxH: 17 x 6,5 x 4 m
PRODUCT PORTFOLIO
1 ECP-3000 L 10 Big 1000 Support
2 RC-1000 11 VBR-300
3 CRT-100 (x2) 12 NT 4x300 ET TM
4 Modified KitCRT-100 (x2) 13 PKG-1000
5 PLT-1000 (x2) 14 Filter Unit 48 (x2)
6 NT 5x400 ET TM 15 Dust Recovery Kit (x2)
7 RPL-2000 16 Dust Recovery Pipe Kit (x2)
8 VBR-300 17 Humidification Kit
9 NT 6x300 ET 18 Iron Remover
1
2 3
4
5
6
7
8
9
10
11 12
13
14
15
16
Double Line with Pellet Mill PLT-1000 and Bagging Station
17
18
LxPxH: 17,5 x 9 x 4 m
PRODUCT PORTFOLIO
Total Dimensions
Compact Line with PLT-400
Compact Line with PLT-800
PRODUCT PORTFOLIO
Super-Compact Line with PLT-400
Super-Compact Line with PLT-800
INTRODUCTION
MODULE 1
Object and limits
Raw materials
Heating value
Overview of current laws and regulations on pellet
Overview of emissions
MODULE 2
Technical notions on materials and dies
Die compression, optimization
Water and soil improver dosing
MODULE 3
Exploded views
Maintenance
The importance of lubrication system
PELLET PRODUCTION LINE
MODULE 4
Operations on the machine
Protections on the machine
Switching on and off sequence
Vacuum testing
MODULE 5
Production test
Compression optimization and machine adjustments
MODULE 6
Die replacement
Central bearing replacement (theory)
Roller bearings replacement
Bolts and pins check
MODULE 7
Supervised production with process management by new conductors
DRYER
MODULE 8
Safety on the machines
Dryer controls adjustment
Management and cleaning of hot air generator
Test on material and adjustments
“PELLET ACCADEMY” Programme
The "Pellet Academy" is a training course for
operators specialized in the management of
pellet production lines.
The training aims to provide participants
knowledge about areas strictly connected to
the production of pellets such as: main notions
of solid compression dynamics, behaviour and
yield of the various essences, hints to the most
common standards, operation and
maintenance of specific machinery and reading
of their exploded views.
At the end of the course all participants will
receive a certificate of participation.
The training course will be held at our
company and it twill last 32 hours.
On the side you will find the programme of the
course.
Smartwood S.r.l.
Via Ezio Giraudo, 10
12020 Villafalletto (CN)
Tel.: +39(0) 171 910 010
E-mail: [email protected]
Web: https://www.smartwoodsrl.com
VAT: IT03662860042