http://www.lginnotek.com Last Update : 15/DEC/2006 LG Innotek To Be the First Partner Bluetooth Module Guide W ireless Communication Module Model No. Size (mm) Firmware Host I/F X-tal E 2 PROM Application LBMA-2B55 5.0 x 5.0 x 1.2 HCI UART,USB,PCM Ext Ext Mobile Phone LBMA-1B96 9.8 x 6.6 x 1.4 HCI UART,USB,PCM Ext Ext Phone, AP LBMA-1CB8 11.3 x 8.3 x 1.4 HCI UART,USB,PCM Internal Internal Phone, AP LBRQ-2B43 4.5 x 3.2 x 1.2 N/A BlueQ (Qualcomm I/F) Ext N/A Mobile (CDMA) LBRQ-2B54 5.0 x 4.0 x 1.4 N/A BlueQ (Qualcomm I/F) Ext N/A Mobile (CDMA) LBMA-2C67X 6.9 x 7.9 x 1.5 HCI, RFCOMM UART,PCM,SPI Internal Internal Mobile Phone LBMx-2C66X 6.4 x 6.9 x 1.4 HCI UART,USB,PCM Internal Internal Phone, CAR RBCA-B001A 6.3 x 5.3 x 1.4 HCI UART,PCM,I2S Ext Ext BT+FM Rx
19
Embed
LG Innotek Bluetooth Module Guide · 2016. 5. 22. · LG Innotek To Be the First Partner Bluetooth® Module – LBMA-2C67X Design and Specifications are subject to change without
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek To Be the First Partner
Bluetooth Module GuideW
irele
ss C
omm
unic
atio
n M
odul
e
Model No.Size(mm)
Firmware Host I/F X-tal E2PROM Application
LBMA-2B55 5.0 x 5.0 x 1.2 HCI UART,USB,PCM Ext Ext Mobile Phone
LBMA-1B96 9.8 x 6.6 x 1.4 HCI UART,USB,PCM Ext Ext Phone, AP
LBMA-1CB8 11.3 x 8.3 x 1.4 HCI UART,USB,PCM Internal Internal Phone, AP
LBRQ-2B43 4.5 x 3.2 x 1.2 N/A BlueQ(Qualcomm I/F) Ext N/A Mobile (CDMA)
LBRQ-2B54 5.0 x 4.0 x 1.4 N/A BlueQ(Qualcomm I/F) Ext N/A Mobile (CDMA)
LBMA-2C67X 6.9 x 7.9 x 1.5HCI,
RFCOMMUART,PCM,SPI Internal Internal Mobile Phone
LBMx-2C66X 6.4 x 6.9 x 1.4 HCI UART,USB,PCM Internal Internal Phone, CAR
RBCA-B001A 6.3 x 5.3 x 1.4 HCI UART,PCM,I2S Ext Ext BT+FM Rx
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek To Be the First Partner
Bluetooth® Module – LBMA-2B55
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionLBMA-2B55 is a Class 2 (4dBm Max.) Bluetooth® module for mobile handsets, personal computers, automotive telematics systems and computer peripheral devices application.
Features- Dimension : 5.0x5.0x1.2mm- Temperature Range : -20℃ ~ +70℃- Supply Voltage :
VDD_REGIN – 1.7V to 3.6VVDD_USB – 3.0 to 3.6V
- Output Power : +1dBm (Typical) Class 2- Sensitivity : -85dBm (Typical)- Interface : HCI, USB, UART, PCM- Bluetooth® Specification Ver2.0 Compliant with EDR
(Enhanced Data Rate)
Applications- Mobile handsets- Personal computers- Automotive telematics systems- Computer peripheral devices
PIN # Pin Name I/O Power domain Description1 VDD_1.5V I/O - RF power supply or regulated output power supply2 XTAL_IN I VDD_RF Crystal or frequency reference input 3 PCM_IN I VDDO PCM data input4 PCM_SYNC I/O VDDO PCM sync signal5 RST_N IPU VDDO Active LOW system reset6 VDDC O - Baseband core power supply7 LPO_IN I VDD_RF LPO input8 GND - -9 VDD_REGIN I - Unregulated main power supply
10 UART_TXD/SPI_SO O VDDO UART serial output11 UART_RXD/SPI_SI I VDDO UART serial input12 WIFI_BUSY/GPIO_3 I/O VDDO GPIO_3 or BT-Priority or Tx_REQ13 LINK_IND/GPIO_4 I/O VDDO GPIO_4 or LINK_IND or STATUS14 XTAL_PD/GPIO_5 O VDDO GPIO_5 or XTAL_PD15 PA_CTRL/GPIO_6 O VDDO GPIO_6 or PA_CTL16 VDD_USB I - USB interface power supply17 GND - -18 ANT I/O VDD_RF RF I/O antenna port19 VREG_CTRL - - Internal regulator enable/disable control signal20 PCM_CLK I/O VDDO PCM bit clock21 PCM_OUT O VDDO PCM data output22 BT_WAKE/GPIO_0 I/O VDDO GPIO_0 or BT_WAKE23 HOST_WAKE/GPIO_1 I/O VDDO GPIO_1 or HOST_WAKE24 BT_BUSY/GPIO_2 I/O VDDO GPIO_2 or WLAN_ACTIVITY25 UART_RTS/SPI_CSB O VDDO UART request to send26 UART_CTS/SPI_CLK I VDDO UART clear to send27 USB_DETACH/GPIO_7 I/O VDDO GPIO_7 or USB_DETACH28 USB_DN I/O VDD_USB Host USB differential data29 USB_DP I/O VDD_USB Host USB differential data30 TM0 I VDDO Test mode control pin
31~34 GND - -
Status : Doc : LBMA-2B55
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek To Be the First Partner
Bluetooth® Module – LBMA-2C67X
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionLBMA-2C67X is a Class 2 (4dBm) Bluetooth® modulefor mobile handsets, PDA, automotive telematics systems. This module complied with Bluetooth® specification v1.2 and FCC CFR Part 15, EN300440..
- Dimension : 6.9x7.9x1.5mm- Temperature Range : -40℃ ~ +85℃- Supply Voltage :
VDD_VREGIN – 2.2V to 3.6VVDD_DIG – 2.2 to 3.6V
- Output Power : +2dBm (Typical) Class 2- Sensitivity : -80dBm (Typical)- Interface : UART, PCM- Bluetooth Specification Ver1.1, 1.2 Compliant- X-Tal, E2PROM integrated
Actual Size
Features
Applications
LBMA-2C67X
UART
PCM
GPIO
HOST
- Mobile handsets- PDA- Automotive telematics systems
Status : Doc : LBMA-2C67
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek
Dimensions
PIN Description
Mark Dimension Mark Dimension
W 6.9±0.2 L 7.9±0.2
0.25±0.1
0.25±0.1
b5 1.1 ±0.1 b6 0.2 ±0.1
T 1.6 Max a0 0.6 ±0.1
a3 0.95±0.1 a4 0.2 ±0.1
b3 1.2±0.1 b4 0.25±0.1
C1 0.45 ±0.1 C2 0.6 ±0.1
a1 0.5±0.1 a2
b1 0.5±0.1 b2
No. Pin Name Description
1 PIO(0) Programmable input/output line
2 PIO(1) Programmable input/output line
3 VDD_VREGIN D.C Input voltage for internal Regulator
4 GND Ground
5 ANT RF in/out
6 GND Ground
7 PIO(2) Programmable input/output line
8 PIO(3) Programmable input/output line
9 PIO(4) Programmable input/output line
10 PIO(5) Programmable input/output line
11 GND Ground
12 SPI_MOSI Serial peripheral interface data input
13 SPI_CLK Serial peripheral interface clock
14 SPI_CSB Chip select for Serial peripheral interface active low
L
W
a1 a2a3
b1
b2
b3
No. Pin Name Description
15 SPI_MISO Serial peripheral interface data output
16 RESETB Reset if low. Input debounced so must be low for >5ms to cause a reset.
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
Description
LBMX-1B96A is a Class 1 (20dBm) Bluetooth®
module for mobile phone, PDA, mobile PC. This module complied with Bluetooth® v2.0 + EDR Specification compliant
Features
- Dimension : 9.8 x 6.6 x1.4(Typical) mm- Temperature Range : -20℃ ~ +75℃- Supply Voltage : 2.8V ~ 3.6V - Output Power : +17 dBm (Typical) - Sensitivity : -82dBm (Typical)- Interface : UART, USB, PCM- Bluetooth Ver2.0 + EDR Specification Compliant- Stack : HCI
Applications
- Mobile Phone(CDMA, GSM, UMTS)- One-Phone, Game Phone- Personal Computer- Computer Peripheral Device- Automotive Application System- MP3
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionLBMx-1CB8X is a Class 1 (20dBm Max.) Bluetooth®
module for mobile handsets, personal computers, automotive telematics systems and computer peripheral devices application.
- Dimension : 11.3x8.3x1.4mm- Temperature Range : -20℃ ~ +70℃- Supply Voltage :
VREGIN – 2.2V to 4.2VVDD_USB – 3.1 to 3.6VVDD_DIG/PA – 2.9 to 3.1V
- Output Power : +16dBm (Typical) Class 1- Sensitivity : -80dBm (Typical)- Interface : UART, USB, PCM- Bluetooth® Specification Ver2.0 Compliant with EDR (Enhanced Data Rate)
Actual Size
Description
Features
Applications
LBMx-1CB8X
UART
PCM
GPIO
HOST
- Mobile handsets- Personal computers- Automotive telematics systems- Computer peripheral devices
USB
Status : Doc : LBMA-1CB8
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek
Dimensions
PIN Description
(1) (10)
(11)
(17)
(18)(27)
(28)
(34)
(11)
(27)
(34)
(1)
No. Pin Name I/O Description No. Pin Name I/O
1 VDDPA I Power supply for PA 18 USB_DP I/O USB data plus
I/O
I
I
O
I
I
I
I
I
I/O
I/O
I
I/O
I/O
I/O
I/O
I
I
I/O
I
I
I
O
I/O
I
O
I
I
I/O
I
I/O
O
Description
2 GND Ground 19 USB_DN USB data minus
3 GND Ground 20 GND Ground
4 ANT RF input/output 21 UART_CTS UART Clear to Send active low
5 GND Ground 22 UART_TX UART Serial Output active high
6 SPI_MOSI SPI data input into BlueCore 23 VDDANA Power supply for RF circuitry
8 PCM_OUT PCM Data Output 25 VREG_IN Regulator input
9 SPI_CLK SPI clock 26 VDDUSB Positive supply for USB and
10 SPI_CSB Chip select for SPI, active low 27 GND Ground
11 SPI_MISO SPI data output from Bluecore 28 GPIO4 Programmable input/output line
12 RESETB Reset if Low 29 GPIO5 Programmable input/output line
14 PCM_SYNC PCM Sync Signal 31 GPIO10 Programmable input/output line
15 PCM_IN PCM Data Input 32 GPIO9 Programmable input/output line
16 PCM_CLK PCM Bit Clock 33 GPIO2 Programmable input/output line
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionLBMx-2C66X is a Class 2 (4dBm) Bluetooth® modulefor mobile handsets, personal computers, automotive telematics systems and computer peripheral devices application.
- Dimension : 6.4x6.9x1.4mm- Temperature Range : -40℃ ~ +85℃- Supply Voltage :
VDD_VREGIN – 2.2V to 3.6V- Output Power : +2dBm (Typical) Class 2- Sensitivity : -83dBm (Typical)- Interface : UART, USB, PCM- Bluetooth® Specification Ver2.0 Compliant with EDR (Enhanced Data Rate)
Actual Size
Features
Applications- Mobile handsets- Personal computers- Automotive telematics systems- Computer peripheral devices
LBMx-2C66X
UART
PCM
GPIO
HOSTUSB
Status : Doc : LBMX-2C66
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek
Dimensions
PIN DescriptionNo. Pin Name Description
1 ANT RF in/out
2 GND Ground
3 PIO(0) Programmable input/output line
4 PIO(1) Programmable input/output line
5 AIO(0) Programmable input/output line
6 VDD_VREGIN D.C Input voltage for internal Regulator
7 PIO(4) Programmable input/output line
8 PIO(5) Programmable input/output line
9 GND Ground
10 PIO(8) Programmable input/output line
11 USB_DP USB data plus with selectable internal 1.5kΩ Pull-up resistor
12 USB_DN USB data minus
13 VDD_1R8V Using 2.2uF decoupling capacitor(refer to clause 14)
14 PCM_OUT Synchronous data output
15 PCM_SYNC Synchronous data Sync
16 GND Ground
T
CONTACT
L
a1
a2
b1
b2
b1
b2
c1
c2
d
d
e
e
W
e
Mark Dimension Mark Dimension
W 6.4±0.1 L 6.9±0.1
b1 0.3±0.1 b2 0.6±0.1
T 1.4 Max Unit : mm
0.65 ±0.1
c1 0.1 ±0.1 c2 0.1±0.1
0.3±0.1
e 0.45±0.1 a1
a2 1.0±0.1 d
GroundGND32
Programmable input/output linePIO(2)31
Programmable input/output linePIO(3)30
Serial peripheral interface data inputSPI_MOSI29
Serial peripheral interface data outputSPI_MISO28
Serial peripheral interface clockSPI_CLK27
Chip select for Serial peripheral interface active lowSPI_CSB26
GroundGND25
Reset if low. Input debounced so must be low for >5ms RESETB24
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionLBRQ-2B43 is a Class 2 (4dBm) Bluetooth® RF module for mobile phone with any of the Bluetooth® enabled QUALCOMM MSM chipset.
Features- Dimension : 4.5x3.2x1.2mm- Temperature Range : -30℃ ~ +75℃- Supply Voltage :
VDD_BAT – 1.9V to 3.6VVDD_MSM – 1.62 to 2.92V
- Output Power : +1dBm (Typical) Class 2- Sensitivity : -87dBm (Typical)- Interface : BlueQ- Bluetooth® Specification Ver1.1, 1.2 Compliant
Applications-Mobile Phone (CDMA, WCDMA, UMTS with Qualcomm MSM chipset based)
Actual Size
LBRQ-2B43BlueQ
TCXO
HOST
Status : Doc : LBRQ-2B43
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek
Dimensions
PIN Description
CONTACT
No. Pin Name I/O Description
1 GND -
2 VDD_INT O Regulated 1.8V output from internal regulator (Core)
3 VCC_OUT O Regulated 1.8V output from internal regulator (VCO)
4 SBST I Serial interface mode control
7 XTAL_IN I Crystal input or TCXO input (12, 19.2, 19.68 and 19.8MHz)
8 GND -
9 CLK_REF O System clock, 12-MHz clock output derived from the XTAL_IN reference
10 VDD_MSM I Digital interface reference voltage
13 RX_BB/TX_BB I/O Bidirectional Tx and Rx data interface pin
5 SYNC_DET/TX_EN I Multipurpose pin: Rx slot - Rx_Enable and synchronization detection ; Tx slot - Tx_En and Tx path data transfer indication
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionLBRQ-2B54 is a Class 2 (4dBm) Bluetooth® RF module for mobile phone with any of the Bluetooth® enabled QUALCOMM MSM chipset.
Features- Dimension : 5.0x4.0x1.4mm- Temperature Range : -30℃ ~ +75℃- Supply Voltage :
VDD_BAT – 1.9V to 3.6VVDD_MSM – 1.62 to 2.92V
- Output Power : +0dBm (Typical) Class 2- Sensitivity : -86dBm (Typical)- Interface : BlueQ- Bluetooth® Specification Ver1.1, 1.2 Compliant
Applications-Mobile Phone (CDMA, WCDMA, UMTS with Qualcomm MSM chipset based)
Actual Size
LBRQ-2B54BlueQ
TCXO
HOST
Status : Doc : LBRQ-2B54
http://www.lginnotek.comLast Update : 15/DEC/2006
LG Innotek
Dimensions
PIN Description
CONTACT
Status : Doc : LBRQ-2B54
4.00
5.00
1.35
(1) (5)
(9)(13)
(6)
(8)(14)
(16)
4.00
5.00
0.75
0.30
0.40
1.10
0.60
1.20
0.601.20
0.80
0.30
0.40
0.40
0.40
No. Pin Name I/O Description
1 GND -
2 VDD_INT O Regulated 1.8V output from internal regulator (Core)
3 VCC_OUT O Regulated 1.8V output from internal regulator (VCO)
4 XTAL_IN I Crystal input or TCXO input (12, 19.2, 19.68 and 19.8MHz)
5 SYNC_DET/TX_EN I Multipurpose pin: Rx slot - Rx_Enable and synchronization detection ; Tx slot - Tx_En and Tx path data transfer indication
6 SBST I Serial interface mode control
7 GND -
8 RX_BB/TX_BB I/O Bidirectional Tx and Rx data interface pin
9 CLK_REF O System clock, 12-MHz clock output derived from the XTAL_IN reference
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. The Bluetooth trade mark is owned by Bluetooth SIG, Inc. and any use of such marks by LG Innotek Co., Ltd. is under license.
Wire
less
Com
mun
icat
ion
Mod
ule
DescriptionRBCA-B001A is a Class 2 (4dBm Max.) Bluetooth® module with FM radio receiver solution.
Features- Dimension : 6.3x5.3x1.4mm- Temperature Range : -30℃ ~ +85℃- Supply Voltage :
VBATT – 2.3 to 5.5VVDDR3V – 1.7 to 3.6VVDDIO – 1.7 to 3.6V
- BT Output Power : +1dBm (typical, Class2)- BT Sensitivity : -83dBm (typical, single slot)- FM Sensitivity : 0dBu (typical, 26dB (S+N)/N)- Interface : HCI, UART, PCM, I2C- Bluetooth® Specification Ver2.0 Compliant with EDR
(Enhanced Data Rate)- 76 to 108MHz band FM receiver (US, Europe, and