USER’S MANUAL
USER’S MANUAL
LED HDTV
SLTV-3219A-3S
MODEL
SKYWORTH ELECTRONICS, INC.
1312 John Reed Court
City of Industry, CA 91745
Phone: (626) 336-3698
Fax: (626) 336-3238
Email: [email protected]
Safety Information
IMPORTANT SAFETY INSTRUCTIONSRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at the plugs,convenience receptacles, and at the point where they exit from the apparatus.Only use attachments/accessories specified by the manufacturer.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus torain or moisture. The apparatus shall not be exposed to dripping or splashing and thatobjects filled with liquids, such as vases, shall not be placed on apparatus.WARNING: The mains plug is used as disconnect device, the disconnect device shallremain readily operable.
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.Apparatus with class I construction shall be connected to a mains socket outlet with a protective earthing connection.
Important Safety Precautions
Do not place the power cord or other cables across a walkway in case it is trampled on. Do not overload the power cord or power socket. When the power plug is used to disconnect and connect the device, it should easily go into the power source.
Do not place the LED TV on an unstable surface.
Do not disassemble the back cover, as it contains high voltages inside and will cause electric shock. Only qualified professionals should conduct internal adjustments, maintenance, and checks.
The TV set should not be subjected to water droplets, vapor, or splash. This equipment should not be placed on objects filled with liquids. Do not place flame sources, such as lit candles, on or near the LED TV. Please, pull out the power plug and contact after sales support if there are abnormal objects or water in the TV.
Pull out the power cord and antenna cable during electrical storms so the LED TV is not damaged by electrical surges. Keep all people away from the antenna cable during electrical storms.
Important Safety Precautions
Please, immediately pull out the AC power plug from adapter if there is an abnormal sound or smell or the LED TV has sound but no picture, and contact after sales support.
The LED TV should be kept free from rain, moisture and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers, etc.
The LED TV should be kept from high temperature heating sources or direct sunlight. Good ventilation is required. Allow 10 cm. between the LED TV and other appliances or built-in cabinet walls.
When you wipe the front cabinet, please make sure the power plug is pulled out and use a soft, dry, lint-free cloth and handle it with care. Do not repeatedly wipe the panel, nor scrape, tap or strike the panel with a hard object.
Do not wipe the LED TV with any petrol, chemical or alcohol based solvents as it will lead to product damage of the panel and cabinet.
When the television receiver is not used for anextended period of time, it is advisable to disconnectthe AC power cord from the AC outlet.
Table of Contents Table of Contents
1 2
Connecting Digital Audio System
Connecting DVD Player/Set-Top Box via HDMI
Connecting PC
Introduction
Features
Specifications
General Description
Overview of front and side panel
Overview of back panel
External Connection
Connecting VCR
Connecting DVD Player/Set-Top Box
Supporting signals
Basic operation
Turning the TV On and Off
3
4
5
6
11
12
16
7
Accessories 3
8
10
15
13
14
Sdjust the OSD Screen
Picture
Audio
Time
Setup
Lock
Channel
Menu system introduction
19
20
21
22-23
24-34
35-39
Picture defects and the reason
Base bracket guide
Troubleshooting 40
41 Antenna connection 10
15
17
Instruction for main menu 17
Input terminals used for external equipment connection
Introduction
Features
E
Introduction
One ANTENNA input
One Computer VGA/PC input
One HDMI x 3 input One AV input
USB Service inputOne EARPHONE output
One PC Audio input
3 4
Quick Setup Guide
Quick setup Guide
ManualInstructions
AdapterCar charger cable
One COAXIAL output
One YPbPr input
Power Cord
W arningsSpecifications
Fine digital control
NTSC3.58
75 (Unbalance)
NTSC System, ATSC System
Antenna: 2~69; Cable: 1~135 (Analog: 1-125,
Digital: 1-135)
Model
Power adaptor
Display screen type Color active matrix LED display
Sound output(Max) 2 x 10 W
0 C-40 Co o
Display Size
Power Consumption(Max)
Display Screen Type
DC 12V 6A
LED
SLC-3219A-3S
32”
55W
1366X768
Remarks:The above listed specifications and data are subject to change without prior notice.
Remote Control
Wall mount
9.92 lbs
28 Lx6 Wx19 H98
87
61
VESA 100
General Description
Overview of front and side panel
5
SPEAKER
REMOTE CONTROL SENSOR
POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
MENU
Press to see an on-screen menu of your
TV's features.
SOURCE
Change and select the desired mode (TV, AV, Component, HDMI1, HDMI2, HDMI3, VGA, USB)
CH+/-
Press to change channels. In the on-screen menu, use the CH +/-
buttons as up/down arrow buttons.
VOL+/-
Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/-
buttons as left/right arrow buttons.
POWER
Press this button to turn the TV on or off.
Introduction
WBase bracket guide
6
Instruction:1.Place the TV unit on a flat and clean table.2.Fix stand by 4 pcs scerws via scerw hole B and A.
Screw hole A
Screw hole B
Screw
POWER
SOURCE
MENU
7
7
6
6
5
4
8
PICTURE GOTO
EPG
ENTER
EXIT
HDMI
VOL-
VOL+
CH-
SLEEP SOUND
CCRECALL DISPLAY
SOURCE
CH+
POWER MUTE
ZOOM
AUDIO
REPA-B REPEAT
MTS FAV.LIST
CH.LIST
PAUSE/PLAY
STOP
MEDIA
MENU
General Description
Overview of back panel
7. RF
Connect to an antenna or cable
NTSC & ATSC.
COMPOSITE VIDEO8.
Video input for external devices, such
as a camcorder or VCR.
9. COMPONENT
Connect Component video.
AUDIO output10.L/R
Audio outputs for external devices.
11. POWER(DC 12V) input
1. EARPHONE
Connect a set of phone for private
listening
2. USB Service port .
3. HDMI(1/2/3)
Connect a device with a HDMI output.
VGA/PC IN4.
Connect to your PC.
5. PC AUDIO
Audio input for external devices
6. COAXIAL
Connect to a Digital Audio devices.
1
3
5
7
9
11
13
15
17
20
22
23
25
27
29
31
2
4
6
8
10
12
14
18
19
21
24
26
28
30
16
1. POWER Button( )Press this button to turn the TV on or into standby mode.2. MUTE ButtonPress this button to mute the sound.3. SLEEP ButtonPress this button to set the sleep timer.The sleep timer values are: off.5.10.15.30.45.60.90.120.180.240 minutes.4.GO TO ButtonPress this button to go to desired position the playerprovides 3 search mode.5.SOUND ButtonPress this button to select desired sound mode.6.PICTURE ButtonPress this button to select desired picture mode.7.RECALL ButtonThis button is used to return to the previous channel.8. DISPLAY ButtonPress this button to display the information on current input.9. AUDIO ButtonPress to display the language of the audio in DTV.10. CC ButtonPress to turn ON/OFF closed captions.11. PREV/NEXT Button ( / )Play previous / next media file.12. FR/FF Button( / )Play fast backward / forward.13. MEUN ButtonPress this button to enter the menu mode for variousoptional adjustable settings or quit from current menu.14. ELECTRONIC PROGRAM GUIDE(EPG)ButtonPress this button to call up the Electronic Program Guide.15. UP/DOWN( / )ButtonPress these button to select the desired items in the menu.16. LEFT/RIGHT( / )ButtonPress these button to select the desired items in themenu, or enter the selected.17. EXIT ButtonPress this button to escape from the current operation.18. ENTER ButtonPress this button to enter the selected item.19. SOURCE ButtonPress this button to display the input source.Using UP/DOWN button to select and RIGHT orENTER button to confirm.20. A-B REPEAT Button (REP A-B)You can repeatedly play a given portion by operating as follows:To press this button once to define the portionhead.To press this button again to define the portion toe.Then the portion will be played repeatedly.To press this button again to return to normal playback.
32 33
7 8
3
HDMI3 VGAEARPHONE
OUT
1
COAXIAL
OUT
4
PCAUDIO
INHDMI2HDMI1
6
USB
Service port
2 3 3 5
7RF
INP
bP
r
IN
IN
LR
VID
EO�
Y
VID
EO
8
9
AU
DIO
O
UT
LR
10
PO
WE
R I
NP
UT
DC
12
V
11
21. REPEAT ButtonReturn to the previously viewed program.22. PLAY AND PAUSE Button( )Press this button to start playback. Press this button again to pause playback.23. MTS ButtonWhen stereo program is received, press this button to switch sound system between mono and stereo.When SAP program is received, press this button to switch sound system between mono and SAP. When stereo and SAP program is received, press this button to switch among mono, stereo and SAP.24. FAVORITE LIST (FAV.LIST) ButtonPress this button to display the favorite program list.25. VOL+/VOL- ButtonPress these button to increase or decrease the volume.26. CH+/CH- ButtonPress these button to select channels in ascending or descending order.27. CH.LIST ButtonPress this button to display the channel list in TV mode.28. STOP Button( )When this button is pressed once, the unit records the stopped point from where playback will resume(resume function) if PLAY is pressed afterwards. But if STOP button is pressed again instead of PLAYbutton, there will be no resume function.29. MEDIA ButtonDirectly switch to USB channel from any other source.30. HDMI ButtonDirectly switch to HDMI channel.31.NUMBER(0-9) ButtonEnter digits for channel selection or password setting.32. For sub-channel selection.33. ZOOM ButtonPress this button to ZOOM Pictures.
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Antennas with 300 ohm flat twins Leads Antennas with 75 ohm Round Leads
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
9 10
External Connection
Connecting VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable
system.
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
We recommend the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN
terminal on the TV.
4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN
jack on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and
AUDIO R jacks on the TV.
If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to
the right and left audio input jacks of the TV. If your VCR is stereo, you must connect
two cables.
RF Cable
(Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
VCR Rear Panel
External Connection
Connecting DVD Player/Set-Top Box
and the AUDIO OUT jacks on the DVD player.
the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.
The rear panel jacks on your TV make it easy to connect a DVD to your TV.
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr
(Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio
cable to COMPONENT IN also.
Each DVD player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite Core.
1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on
2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the TV
Component Cable (Not supplied)
DVD Player/Set-Top Box
Audio Cable (Not supplied)
11 12
HDMI3 VGAEARPHONE
OUT
COAXIAL
OUT
PCAUDIO
INHDMI2HDMI1
USB
Service port
RF
INPb Pr
IN IN
L RVIDEO�
Y
VIDEOAUDIO
OUTL R
POWER INPUT
DC 12V
HDMI3 VGAEARPHONE
OUT
COAXIAL
OUT
PCAUDIO
INHDMI2HDMI1
USB
Service port
RF
INPb Pr
IN IN
L RVIDEO�
Y
VIDEOAUDIO
OUTL R
POWER INPUT
DC 12V
External Connection
Connecting Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1
CH.
We recommend the use of cables with a Ferrite Core.
Digital Audio System
2.R/L audio out
Audio out: output single from TV, AV, HDMI, PC.
Audio Out can be used to connect to an external Amp, Wallmount Stereo or Home
Entertainment System.
This volume output is not controlled by the volume control on the TV or Remote Control.
To use this function, turn down the volume on the TV and use the volume control
from AV Amp / Stereo / Tuner or Home Theater System.
AUDIO Cable (Not supplied)
1.Connect COAXIAL Cable between the SPDIF jacks on the TV and the Digital Audio amplifier.Input jacks on the Digital Audio System. When a Digital Audio System is connected to the SPDIF terminal: Decrease the gain (volume) of the TV, and adjust the volume level using the Digital Audio system's volume control.
COAXIAL
COAXIAL Cable (Not supplied)
External Connection
Connecting DVD Player/Set-Top Box via HDMI
This connection can only be made if there is a HDMI Output connector on the external
device.
What is HDMI?
HDMI or high-definition multimedia interface, is a next-generation interface that enables
the transmission of digital audio and video signals using a single cable without
compression.
Multimedia interface is a more accurate name for it especially because it allows multiple
channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi-channel digital audio.
Each DVD player/STB has a different back panel configuration.
We recommend the use of cables with a Ferrite Core.
1. Connect an HDMI Cable between the HDMI connector on the TV and the
HDMI connector on the DVD player/Set-Top Box.
HDMI Cable (Not supplied)
DVD Player/Set-Top Box
13 14
HDMI3 VGAEARPHONE
OUT
COAXIAL
OUT
PCAUDIO
INHDMI2HDMI1
USB
Service port
RF
INPb Pr
IN IN
L RVIDEO�
Y
VIDEOAUDIO
OUTL R
POWER INPUT
DC 12V
HDMI3 VGAEARPHONE
OUT
COAXIAL
OUT
PCAUDIO
INHDMI2HDMI1
USB
Service port
RF
INPb Pr
IN IN
L RVIDEO�
Y
VIDEOAUDIO
OUTL R
POWER INPUT
DC 12V
External Connection
Connecting PC
Each PC has a different back panel configuration.
The HDMI jacks do not support PC connection.
We recommend the use of cables with a Ferrite Core.
1. Connect a D-Sub Cable between RGB/PC IN connector on the TV and the PC output
connector on your computer.
D-Sub Cable (Not supplied)
PC
2. Plug PHONE out connector into PHONE out jack on the TV the TV speaker will
be muted.
3. Connect the PC audio input jacks on the TV
Supporting signals
1360X768
Turning the TV On and Off
Basic Operation
2. Press button on the LED TV.
3. Normal picture will be displayed on the screen after 6 seconds. If no signal input,
4. If temporary POWER off is required, press button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord plug
for this unit.
6. After switching off the unit, you should turn on the TV again at least 5 seconds later.
Status indication lamp
Green: In power on mode.
Red: In standby mode.Auto power off
If there is no signal input in any Mode, the TV will automatically accesses the standby
state in about 15 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized at turning off the unit.
When being started up again, the unit will work according to the mode set before being
turned off.
1. How to turn the TV on or off1. After attaching cable to either an antenna or a cable service, insert the power cord plug
into a polarized AC outlet.
15 16
HDMI3 VGAEARPHONE
OUT
COAXIAL
OUT
PCAUDIO
INHDMI2HDMI1
USB
Service port
RF
INPb Pr
IN IN
L RVIDEO�
Y
VIDEOAUDIO
OUTL R
POWER INPUT
DC 12V
"No Signal" will be displayed on the screen.
INPUT SOURCE
TV
AV
Component
HDMI1
HDMI2
HDMI3
VGA
USB
Adjust the OSD Screen
Press SOURCE button to display the input source list.Press ▼/▲�button to select the input source you want to watch.Press ENTER button to enter the input source.
Instruction for main menu
OSD Menu Operations OSD Menu Operations
17 18
Instruction for main menu
Operation of keys under main menu
Function
Main Sub
Menu Exit from Main
menu
Return to Main menu
Exit Exit from Main
menu
Exit Menu
Up --------Select previous Item,if current Item is the first one,then it
will skip to the last one
Down Enter SubMenu Select next Item,if current Item is the last one, then it will skip
to the first one
Right Change
SubMenu
Adjust Item option or value;enter the next menu
Left Change
SubMenu
Adjust Item option or value
OK/Enter Enter SubMenu Enter next menu
key
Note:1. The menu is divided into three parts on the whole: main menu, submenu, prompt menu2. Main menu will be side-to-side setup from left to right:Picture / Audio/ Time/ Setup/Lock/ Channel3. Submenu will be end-to-end arranged from the top town.4. Prompt menu will be side-to-side setup from left to right
OSD Menu Operations
Picture
OSD Menu Operations
19 20
Function introduction
Item Variablerange Default Explanation
Picture ModeStandard / Dynamic
/Soft/ UserStandard
Contrast 0----100 50
You will need to watch the picture
when you adjust it,so,we close themainmenu,pop up Contrast smallmenu
Bright 0----100 50Same to Contrast
Color 0----100 50This itemis unavailable under VGA
channel and DVI signal
Tint -50-----50 0
Only adjustable under NTSC signal,
unadjustable under other
signals.Recover to 0 under non NTSC
signal.
Sharpness 0----100 50This Item is unavailable under VGA
channel and DVI signal
Color Temp. Normal /Warm/Cool Normal
Note:We set default setting as bellow, and you can change them to proper value for your product.Standard: Contrast = 50, Brightness = 50, Color = 50, Sharpness =50.Dynamic: Contrast = 70, Brightness = 60, Color = 60, Sharpness =60.Soft: Contrast = 45, Brightness = 40, Color = 50, Sharpness = 50.User: Contrast = 50, Brightness = 50, Color = 50, Sharpness = 50.
Audio
Function introduction
Item Variable range Default Explanation
Sound Mode
Standard / Music/ Movie /
UserStandard
Bass 0---100 50
Treble 0---100 50
Balance 0---100 50
Surround Off / On Off
AVC On / Off On
SPDIFRAW/ PCM
RAWOnly available under DTV channel and
HDMI channel, it is grey under other
channels
Audio
Language
English/French
/Spanish English
Select the option according to thelanguage along with code stream,most
support three kinds. Only adjustableunder DTVchannel, it is grey undernonDTV channel.
Note:We set default setting as bellow, and you can change them to proper value for your product.Sound Mode High, low volume for each item:Standard: Bass = 50, Treble = 50, Balance = 50.Music: Bass = 80, Treble = 60, Balance = 50.Movie: Bass = 60, Treble = 55, Balance = 50.User: Bass = 50, Treble = 50, Balance = 50.
OSD Menu Operations
Time
OSD Menu Operations
21 22
Setup
Item Variablerange Default Explanation
SleepTimer
Off/5Min/10Min/15Min/30Min
/45Min/60Min/90Min/120Min
/180Min/240Min
Off
Time ZonePacific /Alas ka/Hawaii
/Eastern/Cent ral/MountainPacific Default value can
be modifiedaccording to client'srequirements.
Daylight
SavingTime
Off/On OffOnly adjustable
under DTV
channel.
Clock
Get date and time
from the code stream
of DTV, user can't
modifyit manually,set
null under nonDTV
channel.
Function introduction Function introduction
Item Variable range Defaul Explanation
Menu LanguageEnglish / French
/SpanishEnglish
Now thereare only three kinds oflanguage for OSD,if clients needmore,we can add
Transparency Off/On Off Transparency of OSD
Zoom Mode
Non VGAchannel:
Wide/Zoom/Cinema
/Normal
VGAchannel:
Wide/Nornal
Wide
Only can be adjusted whenthere is signal
Noise ReductionOff/Weak/Middle/Strong
Middle
PC SETUPOnly can enter submenu under PC
channel
Closed Caption
You can enter CCD submenu
through this option, menu
pattern and function explanation
XVS On/Off On Dynamicbrightness control
Restore Default
For this operation, first confirm
which options need to be restoreaccording to client's requirements.We need to have one defaultstandard. Menu pattern pleaserefer to 4.2.4.3.5 4.2.4.3.5
OSD Menu Operations
Setup
OSD Menu Operations
23 24
Lock
Function introduction
Item Variablerange Default Explanation
H-Pos 0--100 Forthis option, you'd better not adjust it
V-Pos 0--100
Clock 0--100
Phase 0--100
AutoIf signal is lost after entering this menu,it will close the menu automatically to
avoid using this Auto function whenthere is no signal
Item Variable range Default Explanation
CC Mode Off/On/CC on Mute OffPay attention on thelogic relation with MUTE
Basic SelectionCC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4 CC1
Advanced
Selec tion
Service1/ Service2/
Service3/ Service4/
Service5/ Service6/
Service1
Only adjustable under DTV
channel and there is signal,
or, it is grey and
unadjustable
Option
Only can enter next menu
under DTV channel and
there is signal, or, it is grey
and unadjustable.
Function introduction
OSD Menu Operations
Restore Default
OSD Menu Operations
25 26
Three-level submenuSetup/ Closed Caption /Option appearance
Function introduction
Item Variablerange Default Explanation
Mode Default /Custom DefaultIf it is default, then allthe items below aregrey and unadjustable.
Font Style
Default /Font 0/Font1/Font2/Font 3/Font 4/Font 5/Font 6/ Font7
Default
Font Size Default/Normal/Large/Small Default
FontEdgeStyle
Default/None/Raised/Depress ed
/Uniform/Left Shadow/RightShadow
Default
FontEdgeColor
Default /Black/White/Red/Green /Blue/Yellow/Magenta/Cyan
Default
FG Color
Default /White /Black/Red/Green/Blue/ Yellow/Magenta/Cyan
Default
BG Color
Default /White /Black /Red/Green/Blue/ Yellow/Magenta/Cyan
Default
FG OpacityDefault /Solid /Flash ing /Translucent/Transpar ent/
Default
BG Opac ityDefa ult /Solid /Flash ing /Translucent/Transpar ent/ Default
LockLock
OSD Menu Operations
Lock submenu
OSD Menu Operations
27 28
Prompt menu for entering password
Note:Input the correct password with four number(from 0-9), then you can enter next levelmenu. If the password is wrong, then there will be prompting information in the middleof the menu
LockLock
Item Variablerange Default Explanation
Change LockEnter the menu for user to define thepassword
Syst em Lock Off/On Of fMain switch of VCHIP, if it is OFF, then US
and Canada will be grey.
US US VCHIP setting,enslaved to System Lock
option.
CanadaCanada VCHIP setting, enslaved to System
Lock option.
RRT Set t ingOnly when the system detects DTV code
stream with RRT information,then you can
enter submenu,or, it will be grey.
Reset RRT RRT reset.
Function introduction
OSD Menu Operations OSD Menu Operations
29 30
LockLockChange Password
US
Item Variablerange Default Explanation
TVEnter TV RATINGmenu defined by theuser, pleaserefer to 4.2.5.4.1
MPAAN/A/G/PG/PG-13
/R/NC-17/XN/A
Function introduction
Canade
Item Variablerange Default Explanation
Canada English E/C/C8+/G/PG/14+/18+ E
Canada French E/G/8ans+/13ans+/16ans+/18ans+ E
Function introduction
OSD Menu Operations OSD Menu Operations
31 32
LockLockRRT Setting
Item Variablerange Default Explanation
Humor Level Enter next level menu, please refer to
4.2.5.4.2
Intellig ence Level4.2.5.4.3
Function introductionNote:Before resetting, it will remind the user to confirm again.
Reset RRT
Lock/ US/ TV
Note:1. Use direction keys to move the object, press OK or Enter keys to lock or unlock. When lock it, it shows black screen and MUTE, pop out prompting menu for you to input password.
Enter next level menu, please refer to
OSD Menu Operations OSD Menu Operations
33 34
LockLock
2. Only input correct password in prompt dialog box can you watch the programnormally, but if you change the channel or close it and then return to this channel, youstill need to input the password again.
Lock/ RRT Setting / Humor Level
Item Variablerange Default Explanation
DH Off/On Off
MH Off/On Off
H Off/On Off
VH Off/On Off
EH Off/On Off
Function introduction
Lock/ RRT Setting / Intelligence Level
Item Variablerange Default Explanation
VL Off/On Off
LL Off/On Off
NL Off/On Off
VH Off/On Off
TEST-MA Off/On Off
Function introduction
OSD Menu Operations OSD Menu Operations
35 36
ChannelChannel
Item Variable range Default Explanation
Air/Cable Air/Cable Cable
Auto Scan Enter submenu of automatic searching,
please refer to 1.2.6.3.1
FavoriteUser defineshis Fav channel, beforesearching, it is grey and can't be used
Show/HideUser defines the channels needto skip,
before searching, it is grey and can'tbe
used.
Channel No.Among all the
channels searched
Channel LabelEnter the menu of the channeldefined by user.
DTV SignalDynamic display the intensity of DTV
signal,it is alwaysgrey and can'tbe
selected.
Function introduction
Auto Scan submenu
Function introduction
Item Variablerange Default Explanation
Cable System AUTO/STD/IRC/HRC AUTO
This option depends onAir/Cable in previous menu,when it is in Cable,then thisoption is adjustable.
Startto Scan ---- ----- Enter submenu of searching, please
referto 1.2.6.4.1
OSD Menu Operations OSD Menu Operations
37 38
ChannelChannel
Keys' function
Show/Hide Submenu
Note:Key's function is same with that in Favorite submenu.
Favorite submenu
Key Function
OK/Enter Select or cancel current channel as FAV channel
MEMU Return to previous menu
EXIT Close main menu
UP Same to CH+ function
DOWN Same to CH- function
RIGHT -----------
LEFT -----------
Channel Label s ubmenu
39 40
OSD Menu Operations
Channel
Channel/ Auto Scan/Start to Scan(USA)
Keys' function
keys Function
OK/Enter Return to previous menu
MENU Return to previous menu
EXIT Close the main menu
UP Page up in alphabetic order,e.g. Next letter of K is L
DOWN Page downin alphabetic order,e.g. Last letter of K is J
RIGHT Move the object backward
LEFT Move the object forward
Keys' function
keys Function
MENU
EXIT
Exit from searching and save the searched channels, close main menu
Exit from searching and save the searched channels, close main menu
Troubleshooting
C
C
EE
EE
Disconnect the power cord, wait 60 seconds then reconnect the power cord and restart the TV.
No support for this function.
Increase the volume.please check sound settings.
41
Picture defects and the reason