KSG M4 MAGAZINE ADAPTER overview Feed tube Magazine well Magazine feed nozzle Body block M5 nut Right lock arm Left lock arm Mag. release button Spring Mag. release arm M5x30 cap head bolt Mag. well pin Mag. release paddle NOTES 1. WARNING: avoid hard impacts to the adapter or magazine while fitted to the gun. 2. WARNING: the adapter feed path holds 25 rounds. Once the magazine is removed, raise the muzzle and shake to remove remaining rounds. Cycling and discharging the KSG at least once is recommended to render it properly clear. Observe all usual Airsoft safety procedures. 3. The magazine well has been slightly enlarged to accommodate some magazine brands with wider spines. Slimmer magazines will have a slight amount of play when fitted. 4. The rear of the adapter features a slot to allow for an HPA line to connect with a 90° elbow connector tapped into the gas tank fill port. This is not guaranteed to work with all types of connector and air line. 5. Each adapter is tested for BB feeding upon assembly. If you experience any difficulty in feeding, test the adapter outside of the KSG. We also recommend re-testing the KSG with the original shot-shells to rule out any issues with the ammunition. 6. For comments or questions, please contact DTD at: [email protected] or at https://www.facebook.com/DTD3D © Copyright 2017 Double Tap Designs