KONFIGURASI ROUTER 2 Router>en Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#line con 0 Router(config-line)#password cisco Router(config-line)#login Router(config-line)#exit Router(config)#line vty 0 4 Router(config-line)#password cisco Router(config-line)#login Router(config-line)#exit Router(config)#enable password cisco Router(config)#int Fa0/0 Router(config-if)#no shutdown Router(config-if)# %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)#ip address 172.20.20.1 255.255.255.0 Router(config-if)#exit
Konfigurasi Router 2
Nov 28, 2015
konfig
router
router
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KONFIGURASI ROUTER 2
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#line con 0
Router(config-line)#password cisco
Router(config-line)#login
Router(config-line)#exit
Router(config)#line vty 0 4
Router(config-line)#password cisco
Router(config-line)#login
Router(config-line)#exit
Router(config)#enable password cisco
Router(config)#int Fa0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#ip address 172.20.20.1 255.255.255.0
Router(config-if)#exit
Router(config)#int S0/2
%Invalid interface type and number
Router(config)#int S2/0
Router(config-if)#ip address 10.1.1.2 255.255.255.252
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#int S2/0
Router(config-if)#no shutdown
Router(config-if)#ip address 10.1.1.2 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#network 172.
^
% Invalid input detected at '^' marker.
Router(config-router)#exit
Router(config)#router rip
Router(config-router)#network 172.20.20.0 255.255.255.0
^
% Invalid input detected at '^' marker.
Router(config-router)#network 172.20.20.0
Router(config-router)#network 172.20.10.0
Router(config-router)#network 172.20.30.0
Router(config-router)#network 172.20.40.0
Router(config-router)#network 10.1.1.0
Router(config-router)#network 10.1.1.12
Router(config-router)#network 10.1.1.8
Router(config-router)#exit
Router(config)#router rip
Router(config-router)#no auto summary
Router(config-router)#version 2
Router(config-router)#network 172.20.10.0
Router(config-router)#network 172.20.20.0
Router(config-router)#network 172.20.30.0
Router(config-router)#network 172.20.40.0
Router(config-router)#network 10.1.1.0
Router(config-router)#network 10.1.1.8
Router(config-router)#network 10.1.1.12
Router(config-router)#exit
Router(config)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
Router con0 is now available
Press RETURN to get started.
KONFIGURASI ROUTER 1
R1(config-if)#no shutdown
R1(config-if)#clock rate 64000
R1(config-if)#ip address 10.1.1.14 255.255.255.253
Bad mask 0xFFFFFFFD for address 10.1.1.14
R1(config-if)#ip address 10.1.1.14 255.255.255.252
R1(config-if)#ip address 10.1.1.14 255.255.255.252
R1(config-if)#exit
R1(config)#exit
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#show run
Building configuration...
Current configuration : 816 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
!
enable password cisco
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.20.10.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface Serial2/0
ip address 10.1.1.1 255.255.255.252
!
interface Serial3/0
ip address 10.1.1.14 255.255.255.252
clock rate 64000
!
interface FastEthernet4/0
no ip address
shutdown
!
interface FastEthernet5/0
no ip address
shutdown
!
router rip
version 2
network 10.0.0.0
network 172.20.0.0
no auto-summary
!
ip classless
!
!
!
!
!
!
!
line con 0
password cisco
login
!
line aux 0
!
line vty 0 4
password cisco
login
!
!
!
end
R1# config t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#router rip
R1(config-router)#network 172.20.10.0
R1(config-router)#network 172.20.20.0
R1(config-router)#network 172.20.30.0
R1(config-router)#network 172.20.40.0
R1(config-router)#network 10.1.1.0
R1(config-router)#network 10.1.1.8
R1(config-router)#network 10.1.1.12
R1(config-router)#version 2
R1(config-router)#exit
R1(config)#
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#show run
Building configuration...
Current configuration : 816 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
!
enable password cisco
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.20.10.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface Serial2/0
ip address 10.1.1.1 255.255.255.252
!
interface Serial3/0
ip address 10.1.1.14 255.255.255.252
clock rate 64000
!
interface FastEthernet4/0
no ip address
shutdown
!
interface FastEthernet5/0
no ip address
shutdown
!
router rip
version 2
network 10.0.0.0
network 172.20.0.0
no auto-summary
!
ip classless
!
!
!
!
!
!
!
line con 0
password cisco
login
!
line aux 0
!
line vty 0 4
password cisco
login
!
!
!
end
R1#
R1 con0 is now available
Press RETURN to get started.
KONFIGURASI ISP
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname ISP
ISP(config)#line con 0
ISP(config-line)#password cisco
ISP(config-line)#exit
ISP(config)#line vty 0 4
ISP(config-line)#password cisco
ISP(config-line)#login
ISP(config-line)#exit
ISP(config)#enable password cisco
ISP(config)#int Fa0/0
ISP(config-if)#no shutdown
ISP(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ISP(config-if)#ip address 172.20.30.11 255.255.255.0
ISP(config-if)#exit
ISP(config)#int S2/0
ISP(config-if)#no shutdown
ISP(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
ISP(config-if)#ip address 10
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
.1
ISP#
%SYS-5-CONFIG_I: Configured from console by console
ISP#config t
Enter configuration commands, one per line. End with CNTL/Z.
ISP(config)#int S2/0
ISP(config-if)#no shutdown
ISP(config-if)#ip address 10.1.1.10 255.255.255.252
ISP(config-if)#exit
ISP(config)#
ISP#
%SYS-5-CONFIG_I: Configured from console by console
ISP#show run
Building configuration...
Current configuration : 702 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname ISP
!
!
!
enable password cisco
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.20.30.11 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface Serial2/0
ip address 10.1.1.10 255.255.255.252
!
interface Serial3/0
no ip address
shutdown
!
interface FastEthernet4/0
no ip address
shutdown
!
interface FastEthernet5/0
no ip address
shutdown
!
ip classless
!
!
!
!
!
!
!
line con 0
password cisco
!
line aux 0
!
line vty 0 4
password cisco
login
!
!
!
end
ISP#config t
Enter configuration commands, one per line. End with CNTL/Z.
ISP(config)#ip route
KONFIGURASI Router 4
!
!
enable password cisco
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.20.40.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface Serial2/0
ip address 10.1.1.13 255.255.255.252
!
interface Serial3/0
ip address 10.1.1.9 255.255.255.252
clock rate 64000
!
interface FastEthernet4/0
no ip address
shutdown
!
interface FastEthernet5/0
no ip address
shutdown
!
ip classless
!
!
!
!
!
!
!
line con 0
password cisco
login
!
line aux 0
!
line vty 0 4
password cisco
login
!
!
!
end
R4#
R4#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R4(config)#interface Serial2/0
R4(config-if)#
R4(config-if)#exit
R4(config)#
R4 con0 is now available
Press RETURN to get started.
User Access Verification
Password:
R4>en
Password:
R4#
R4#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R4(config)#ip route 172.20.30.10 255.255.255.0 10.1.1.10
%Inconsistent address and mask
R4(config)#ip route 172.20.30.10 255.255.255.0 10.1.1.10
%Inconsistent address and mask
R4(config)#
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up
R4#
%SYS-5-CONFIG_I: Configured from console by console
R4#config t
Enter configuration commands, one per line. End with CNTL/Z.
R4(config)#
R4(config)#ip route 10.1.1.8 255.255.255.252 10.1.1.10
R4(config)#ip route 172.20.30.0 255.255.255.0 10.1.1.10
R4(config)#router rip
R4(config-router)#version 2
R4(config-router)#no auto summary
R4(config-router)#network 10.1.1.12
R4(config-router)#network 172.20.40.0
R4(config-router)#exit
R4(config)#ip route 0.0.0.0 0.0.0.0 10.1.1.10
R4(config)#exit
R4#
%SYS-5-CONFIG_I: Configured from console by console
R4#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 10.1.1.10 to network 0.0.0.0
10.0.0.0/30 is subnetted, 3 subnets
R 10.1.1.0 [120/1] via 10.1.1.14, 00:00:16, Serial2/0
C 10.1.1.8 is directly connected, Serial3/0
C 10.1.1.12 is directly connected, Serial2/0
172.20.0.0/24 is subnetted, 4 subnets
R 172.20.10.0 [120/1] via 10.1.1.14, 00:00:16, Serial2/0
R 172.20.20.0 [120/2] via 10.1.1.14, 00:00:16, Serial2/0
S 172.20.30.0 [1/0] via 10.1.1.10
C 172.20.40.0 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 10.1.1.10
R4#
R4#exit
R4 con0 is now available
Press RETURN to get started.
User Access Verification
Password:
R4>en
Password:
R4#
Related Documents
