Surface Drainage 6 Surface drainage options 8 Product selection 10 Trench drain hydraulics 16 Loadings 22 Material data 24 End user requirements Standard Products 26 KlassikDrain - K100S, KS100S 40 PowerDrain - S100K, S300K 52 Polymer concrete catch basins 54 Accessories 56 FlowDrain - FG100, FG200 70 FastForm - FF300, FF600 Problem Solving Products 78 SlabDrain - H80, H100, H80K, H100K, H100SK 84 ChemDrain - C100, CK100S, CS100K, CH80, CH100, CH80K, CH100K, CH100SK 100 Brickslot 102 Membrane Drain 104 MiniKlassik 106 Cross Sidewalk Drain (CSD) Technical Support and Other Information 110 Trench hydraulics service 111 Grate hydraulics service 112 Layout & scheduling service 114 Ponding analysis 115 Chemical resistance 116 Construction and installation 120 Installation diagrams 122 Volumetric channel capacities 123 Glossary & part number listing Technical Handbook and Product Catalog KlassikDrain Section General purpose trench drainage ACO Drain offer a comprehensice 128 page catalog covering everything you need to know about about trench drainage and the products and services available. To ease electronic transmission of data the catalog has been divided into sections - for a hard copy or other sections call (800) 543-4764 or go to www.acousa.com. This PDF relates to this section only PDF PAGE ONLY
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Surface Drainage6 Surface drainage options
8 Product selection10 Trench drain hydraulics
16 Loadings 22 Material data 24 End user requirements
Technical Support and Other Information 110 Trench hydraulics service111 Grate hydraulics service112 Layout & scheduling service114 Ponding analysis115 Chemical resistance116 Construction and installation120 Installation diagrams122 Volumetric channel capacities123 Glossary & part number listing
ACO Drain offer a comprehensice128 page catalog coveringeverything you need to know aboutabout trench drainage and theproducts and services available.
To ease electronic transmission ofdata the catalog has been dividedinto sections - for a hard copy orother sections call (800) 543-4764or go to www.acousa.com.
This PDF relates to thissection only
PDF PAGE ONLY
www.acousa.com
26
K100SKS100S
Typical applications
• Parking lots & garages
• Shopping malls
• Pedestrian areas
• Light industrial areas
• Commercial areas
• Internal applications
The world's most popular general purposetrench drain system is available with a widevariety of grates in different materials, slotconfigurations, and load ratings.
Grates are secured into the channel byACO's patented boltless locking device- QuickLok.
KlassikDrain's interconnecting polymerconcrete channels feature an integrallycast-in galvanized or stainless steel wearingedge rail, and come in sloped and neutraldepths.
A full range of accessories completes thesystem.
ACO DRAIN
www.acousa.com
27
KlassikDrainGeneral purpose trench drainage
www.acousa.com
28
QuickLok - patented, boltless lockingsystem provides quick fitting and removalof grates. Helps reduce installation/maintenance time and cost.
4” internal width trench system - meter(39.37”) and half meter (19.69”) channel.‘U’ shaped bottom improves flow hydraulics.
Interconnecting end profiles allow easyand effective joining of channels. Appropriatesealant can be used to create a sealed joint.
Wide choice of grates in various materialsand styles (including ADA compliant) forapplications from Load Class A to LoadClass E.
KlassikDrain Features
ACO DRAIN
www.acousa.com
29
Profiled side walls - strengtheningpillars and frost keys provide channelbody strength and mechanical keying tosurrounding concrete.
Sloped (0.6%) channel units - meterlong units provide 98’-5” continuous slope.This equates to 1/16" fall per linear foot. Neutral units can be used to extend runlengths.
Integrally cast-in galvanized steel edge rail provides additional strengthand protects channel body fromdamage. (Stainless steel edge railalso available - KS100S).
Direction arrows on the sides of thechannel indicate flow direction and ensurechannels are installed correctly.
Polymer concrete - a durable, yetlightweight, material made from polyesterresin binder reinforced by mineralaggregates and fillers. It provides up to fourtimes the compressive strength of cementconcrete.See page 22 for material properties.
Bottom drill-outs are included on allchannel units to allow vertical evacuation ofthe system along the run. Schedule 40 drillouts are sized for 4” and 6” pipes.Note: For 6” pipes, an oval to round adapteris required (Part No. 95140).See page 54 for details.
www.acousa.com
30
K0103K010
K020K0203
K1K2
K3K4
K5K6
K7K8
K9K10
K11K12
K13K14
K15K16
K17K18
K19K20
K21K22
K23K24
K25K26
K27K28
K
K208
K01
K0013
K204
6” Sch. 40 outlet caps6” Schedule 40 plain endpipe, polypropylene ovalto round adapter cast intopolymer concrete end cap,available in two heights. Solvent weld tocoupler.
Note: These end caps cannot be cut to height, and fit only at positions shown in layout diagram.
Half meter channelsNeutral channels in 4 depths tosupplement meter channels. Sideknockout andprofiling enableside junction tobe created.
Meter channels0.6% sloped channels in meter lengths and30 depths which connect to create30 meter (98’-5”) continuously sloping run.
Neutral channels available in4 depths. Can be used to create
non-sloped runs, or inserted insloped runs to increase
length.
6” Sch. 40 inlet caps6” Schedule 40 plain endpipe, polypropylene ovalto round adapter cast intopolymer concrete end cap,available in two heights. Solvent weld tocoupler.
Note: These end caps cannot be cut to height, and fit only at positions shown in layout diagram.
System layout
KlassikDrain
ACO DRAIN
www.acousa.com
31
K900
K030K0303 Series 600
End cap
29K30
K308
K304
K900 catch basinIn-line catch basin with 4” and 6” drill-outsfor pipe connection. Available with plastic
trash bucket. Options include in-line or sidefoul air trap.
Any channel can be connected into thecatch basin by removing the end wall to the
Closing/4” inlet/outlet capFits all channels. Manufactured from grayABS to complement edge rail. Guidesaid cutting to correct height. 4” bell endconnection to Schedule 40 pipe. Seal usingPVC-ABS cement.
Note: For depth 1-10 channels ACO recommends removal of unused sections of bell end to ensure adequate pavement material coverage.
Series 600 catch basinsCatch basins with 4”, 6” and 8” drill-outsfor pipe connection. Supplied complete withgrate. Available with plastic trash bucket orfilter bag. Riser unit fits between top andbottom unit. Options include a choice ofdeep or short bases.
Any channel can be connected into thecatch basin by removing the end wall to thecorrect height. Drill-outs guide connectionto channels 5, 10, 15, 20, 25 and 30.See page 52 for details.
Note: These are the pipe flow rates at the specified outlet, NOT channelflow rates.* K900 flow rates without trash bucket - using trash bucket reduces flow.
Notes:1. Preformed 4" dia. & 6" flumed drill-out outlet cast on underside of every channel2. Closing cap can be cut down to suit all channels3. See pages 36-39 for grate details
K100S Parts list
In-line Catch Basins - For information on Series 600 catch basins see page 52
Accessories
Description Part Invert Depth Overall Depth WeightNo inches mm inches mm lbs
KS100S is the KlassikDrain K100S system,which has the integrally cast-in galvanizedsteel rail replaced by a stainless steel edgerail.
KS100S is used for high profileapplications, or where increased corrosionresistance is required - but Vinyl esterpolymer concrete is not necessary.
ACO recommends the use of non-galvanized steel grates with KS100S toavoid galvanic corrosion (where galvanizedsteel reacts with stainless steel).
See pages 36 to 39 for grate details.
KlassikDrain - KS100S
ACO DRAIN
www.acousa.com
35
Notes:1. Preformed 4" dia. & 6" flumed drill-out outlet cast on underside of every channel2. Closing cap can be cut down to suit all channels3. For product dimensional information, see page 324. Grade 304 stainless steel rails, ACO recommends the use of non-galvanized grates with stainless steel rails to avoid galvanic corrosion.
KS100S Parts list
In-line Catch Basins - For information on Series 600 catch basins see page 52
Accessories
Description Part Invert Depth Overall Depth WeightNo inches mm inches mm lbs
Comprised of a glass nylon stud, factory fitted to the grating, which allows a snap fit into astainless steel spring clip in the locking bar. With no loose bolts or bars, QuickLok provideshighly secure boltless locking, that is easy to remove/replace for maintenance and cleaning.Saves time and money during installation.
To remove bar, insert
screwdriver into hole
at end of bar and lever
back serrated end,
rotate bar free.
Push down or stand on
grate until it clicks into
position.
Use hammer to tap
bar into place, so that
serrated ends grip in
recess.
Locate locking bar in
channel wall recesses
by rotating clockwise.
1 2 3 4
To remove first grate,
insert grate removal
tool into slots at end of
grate, pull up sharply.
Rest of grates can be
removed by hand.
5
To install grate, align
QuickLok stud directly
over locking bar.
6
FIT LOCKING BAR FIT GRATE REMOVAL
* Grade 304 stainless steel
Description Part Length Weight Slot size Intake area LockingNo. ins (meters) lbs (ins) sq. ins Type