Product guide Jan 2014 JCK DISTRIBUTORS ENVIRONMENTALLY PREFERRED SOLUTIONS MINING AND INDUSTRIAL
Mar 07, 2016
Product guide Jan 2014 JCK DISTRIBUTORS ENVIRONMENTALLY PREFERRED SOLUTIONS
MINING AND INDUSTRIAL
empathy with People,
delivering value and cost
efficiency with effective
resourcing
Contents
Fuel conditioner
FCC 2-3
FCCV 4
Degreasers
Sure Kleen 5
Exit Grease 6
Big Wash 7
Bitumen Remover and cleaner
B.A.R.C 8-9
Load Release 10-11
Dust suppression 12
Rust remover
Corro-dip 13
De-scaler and rust remover
Phosbrite 14
Hand cleaner
Citrus Clean 15
Lanotec
General Purpose 26-28
Heavy Duty 29-31
Release Agent 32-33
Timber Seal 34-36
Timber Seal Plus 37-38
Type A grease 39-40
Ultimate Protection 41-42
Wire Rope Seal 43-44
Anti-Spatter 45-46
Citra-Force 47-48
Service & support 39
Products
and services
product efficacy
Does the job it says it can do,
efficiently, and with measurable
benefits in cost savings, OH+S
and the environment.
product safety
Products are easy and safe to use
and handle, are non flammable
where possible, comply with
worksafe guidelines, safely
disposed of.
cost effective
We secure favourable prices from
the manufacturer, due to our
bulk buying, and are able to pass
this on to our customers.
Services
if we do not stock a product that
will solve your problem we will
do our best to source it for you.
You name it!
Integrity service performance understanding
FCC is a complete fuel conditioner
providing comprehensive protection
of the fuel system which results in a
clean fuel system with reductions in
running and maintenance costs.
Example of fuel bug
Fuel Bug- the problem
Blocked filters, stuck injectors, internal
corrosion, reduced horsepower and even engine
failure can be caused by a microscopic fungus,
Hormoconis resinae, which is present to varying
extents in all diesels. This fungus commonly
known as the “fuel bug” thrives in fuel storage
tanks using the hydrocarbons in the fuel as a
food source and dissolved oxygen in the water
for respiration.
Hydrocarbons and dissolved oxygen encourage
growth with each fungal cell dividing every 20
minutes. As older fungi die their bodies form a
slime that floats up into the fuel, quickly
clogging filters and narrowing fuel lines. Sludge
adhering to the fuel lines and tank walls
produces corrosive hydrogen sulphide which
causes metal defects in fuel system components
and pitting of the injectors. A unique Rust
inhibitor protects from corrosion.
Microbial growth can be prevented by
eliminating water from the fuel tanks and
ensuring they stay uncontaminated. Biocide
treatment on the other hand will kill any
bacterial and fungal growth but creates a sudden
mass of dead cells which only adds to the
problem.
product applications
• FCC treats petrol, diesel, gasoil, two stroke
BIO-FUELS & heating oil.
• Great for engines of any size and type,
including motorcycles, cars,
vans, trucks, rolling stock and boats of all
shapes and sizes.
Use will not void the engine’s warranty.
• Used in agricultural equipment and
in construction.
• Perfect for marine use in boats of any size.
• Use it in your lawnmower or domestic /
commercial oil tank, to help boilers,
generators, stand-by generators etc.
• Especially useful for holding tanks and
engines or tanks that are laid-up over winter,
when much condensation forms.
easy to use
• Can be used to treat fuel in a holding tank,
or directly into the equipment itself.
• Ideally, to mix well, treat with FCC before
fuel is added
• Use at the economical dose rate of 4,000:1
• For smaller quantities use the CAP on the
bottle to measure accurately.
• Double the dose on first application.
• Use regularly – each time you fill up.
• You cannot overdose with FCC
2
at a glance
• Economical 4000:1 mix ratio
• Treats all fuels – petrol, diesel, gasoil, Bio-
fuels, two stroke & heating oil
• Suitable for all engines
• Removes water from fuel systems
• Kills & removes the Diesel Bug –
no more blocked filters
• Cleans injectors & jets - removes gums,
waxes, resins and acids
• Removes carbon build up
• Reduces harmful exhaust emissions & black
smoke
• Prolongs the life of catalytic converters and
EGR SYSTEMS from malfunctioning
• Reduces expensive maintenance &
downtime
• Restores lost fuel economy
• Improves performance
• Non-toxic, non-flammable, non-biocide,
non-corrosive, biodegradable, & pH neutral
available sizes
250ML, 500ML for accurate dispensing
1 LITRE 5 LITRE 20 LITRE
200 LITRE 1000 LITRE
For large quantities and Auto dosing
Prevention, better than cure!
naturally safe
FCC is pH neutral and contains no
hydrocarbons, sulphur, phosphorous,
nitrogen or metallic ingredients.
It is nontoxic, non-hazardous and
non-flammable.
Under normal conditions of combustion
it will burn to form CO2 (carbon dioxide)
and H2O (water).
Used in hydrocarbon and Bio-fuels it
causes the fuel to burn more efficiently,
thereby reducing harmful emissions.
effect on emissions with FCC
Nitrous oxides: No effect
Carbon emissions: FCC will significantly
reduce HC
( unburnt hydrocarbons)
Carbon monoxide: CO will reduce as the
cleaner burn means that a
higher conversion to CO2 will occur in
the combustion
chamber rather than in the atmosphere.
CO2 will
increase due to the reduction in CO
Sulphur: FCC will not allow sulphur to
form sulphurous acids.
This has a less detrimental effect on
the environment
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
3
brief technical Specifications
Composition: Blend of non-toxic
chemicals
Appearance: Clear, green mobile
liquid
Odour: Eucalyptus
Poisons schedule: Non-toxic
Pot life: Indefinite
Flammability: Non -flammable
pH: Neutral
Safety: Environmentally responsible
costs / benefits
In addition to the intangible benefits
to FCC such as reduction in emissions,
extension of filter life and reduction in
downtime, FCC field tests in Europe,
Canada, Australia and Malaysia have
all indicated significant savings on fuel,
which far outweigh the cost of
purchase of the product
at a glance
• Economical 4000:1 mix ratio
• Treats all fuels – petrol, diesel, gasoil, Bio-
fuels, two stroke & heating oil
• Suitable for all engines
• Removes water from fuel systems
• Kills & removes the Diesel Bug –
no more blocked filters
• Cleans injectors & jets - removes gums,
waxes, resins and acids
• Removes carbon build up
• Reduces harmful exhaust emissions & black
smoke
• Prolongs the life of catalytic converters and
EGR SYSTEMS from malfunctioning
• Reduces expensive maintenance &
downtime
• Restores lost fuel economy
• Improves performance
• Non-toxic, non-flammable, non-biocide,
non-corrosive, biodegradable, & pH neutral
FCC is a complete fuel
conditioner blended with
magnesium providing
comprehensive protection of
the heavy fuel oil systems
which results in reductions in
running and maintenance
costs.
Product application
Designed and formulated to
treat all forms of Heavy Fuel
Oil
Suitable for gas turbines
Eliminates corrosive vanadium
deposits
As effective as FCC is cleaning
out the complete fuel system
Easy to use
Economical rate of 1:4000
To be blended with the service
tanks
Auto dosing systems can be
retrofitted
Vanadium molten deposits
Corrosion initiates from the
Vanadium in the fuel which forms a
low melt glaze during combustion
with other metals in the fuel like
sodium, aluminium, iron, as well as
sulfur and oxygen. These low melt
glasslike compounds not only
corrode equipment but prevent
heat transfer to water in tubes.
Additionally these low-melt
compounds form a hard glaze
when they cool that make cleaning
very difficult.
These corrosive vanadium
compounds reduce efficiency in
heat transfer, resulting in lost BTU's
and a more costly power output.
Treating Vanadium deposits
Testing results using FCC-V has
evidenced that at the correct
dosage and specifications, this
corrosion can be prevented. FCC-V
creates a vanadium compound
during combustion that has a higher
melting point and is noncorrosive,
giving a more complete combustion
and eliminate the black smoke from
exiting the stacks and thereby lead
to less toxic environmental
emissions, greater and more
effective and efficient fuel and plant
operations
Available sizes
100 LITRE
200 LITRE 1000 LITRE
4
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
SURE KLEEN
powerful phosphate
free citrus based
detergent degreaser
SURE KLEEN is a super
powerful quick breaking
detergent degreaser. Sure
kleen solvents are derived
from citrus fruits and it’s
regarded by many as the
best in its class.
Suited for a variety of
Mining and workshop
applications this safe
degreaser is incredibly
diverse and safe to use
Non toxic, non caustic, non
flammable, bio-degradable,
phosphate free and
environmentally friendly.
Available sizes
5 LITRE 20 LITRE
200 LITRE 1000
LITRE
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
5
Product application
Ideally suited for use in all
Automotive and Industrial
applications requiring a heavy
duty all purpose cleaner.
Can be used for the removal of
all oil and grease residues on
floors, walls, vehicles,
locomotives, stationary engines
and compressors trucks etc
Suited to Australian mining
conditions, will not separate.
easy to use May be diluted for brushing.
Suitable for use in spray
applicator.
Can be used in high pressure
cleaners
Not classified as dangerous
Dilution rates as follows:
Heavy Degreasing – 1:10 parts
water.
Medium Cleaning – 1:50 parts
water.
Light Cleaning – 1:100 parts
water.
EXIT GREASE
EXIT GREASE is a non caustic, water soluble heavy duty and general purpose cleaner for the safe removal of grease and oil. Formulated without solvents or phosphates, it is non toxic and non flammable. A leader in the field of environmentally safe degreasers
product applications
EXIT GREASE can be used on workshop
floors, factory walls and bench tops.
Used in transmission centres, mechanical
workshops, loco yards, and rolling
stock.
Approved for use in food preparation
areas, safe to use in kitchens hot plates,
bathrooms showers and toilets.
Formulated without perfumes so it will
not taint food.
easy to use
Applied by spray, exit grease penetrates
deeply
For heavy grease apply by brush and
allow 5 minutes for the product to
penetrate
Can also be used in a soak tank
EXIT GREASE can be diluted right down
to 50:1
technical specifications Composition: Quaternary
ammonium compounds, bio- degradable surfactants and water
Treatment: Apply neat or diluted as required. For heavy grease apply neat, leave for 5 minutes, and then remove with a high pressure water jet.
Flammability: Non flammable Flash point: N/A Poisons: Non-toxic
EXIT GREASE is non-toxic non-caustic
and solvent free degreaser, therefore
safe to use around workshops as well
as kitchens.
Water soluble and formulated with bio
degradable surfactants, it is not only
safe to use, it will not harm surfaces or
the environment. Registered as safe to
use in food prep areas
at a glance
Heavy industrial to light domestic
uses
Environmentally responsible
Safe to use and to store
Non caustic and solvent free
Will not harm surfaces
Suitable for use in food preparation
areas
6
Available sizes
5 LITRE 20 LITRE
200 LITRE 1000 LITRE
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
BIG WASH
We have developed Big
Wash as a diverse heavy
duty detergent for cleaning
farm machinery, trucks, buses
and cars.
It’s a highly efficient streak
free cleaner
easy to use
Easy to use – Big Wash
quickly removes hardened
on dirt and grime.
Hose away all loose dirt
before washing. Dilute Big
Wash at a rate of about
50mls per litre – a more
concentrated mix may be
needed for very heavy
soilage.
A HEAVY-DUTY
ECONOMICAL
DETERGENT FOR BIG
JOBS
DEVELOPED FOR AUSTRALIAN
WORKING CONDITIONS
Big Wash has been developed in
Australia as a heavy-duty cleaner
designed to deal with the toughest
grime and dirt.
It’s not caustic and contains no
solvents or phosphates – but its
powerful foam has an unbeatable
combination of surface action agents
and emulsifiers.
As a degreasing detergent for those
big jobs it’s in a league of its own –
yet it’s completely biodegradable
and safe to use.
product applications
Big Wash is ideal for:
Manual washing
Pressure washers
Foam guns
Steam cleaners
Car-wash systems
7
Available sizes
5 LITRE 20 LITRE
200 LITRE 1000 LITRE
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699 [email protected] www.jckdistributors.com.au
B.A.R.C. BITUMEN &
ASPHALT REMOVER &
CLEANER
New technology allows low volatility
products derived from alternative
sustainable sources to produce superior
results without the traditionally
accepted risks.
This technology is now available to
address the environmental issues
surrounding the removal of bitumen
and asphalt
technical specifications
Derived primarily from natural edible
plant oils, and are free of VOC and the
customary traditional solvents
MSDS available on request
how it works
BARC has a similar molecular
structure to bitumen, resulting in
the rapid penetration of the
bitumen down to the adhered
surface. Spreading itself between the
bitumen and the surface it
effectively lifts the bitumen from
the surface.
Holding the particles in solution
allows them to be removed to
waste or can be separated, allowing
the Bitumen to be recycled
Being chemically similar allows the
bitumen to dissolve in the BARC.
Once rinsed off it leaves behind a
film that makes for easier
subsequent cleaning.
As a direct superior replacement for
Kerosene/diesel it not only speeds
up the whole cleaning action, it
makes it easier the next time around
too and so making effective savings
in labour and downtime
8
naturally safe
Performance exceeds the effectiveness
of hydrocarbon based bitumen and
asphalt removers.
The main difference being that
BARC’s solvents are derived from
edible plant oils and are regarded by
many of its users as the best in its
class.
Non Toxic, Hydrocarbon Free. Non
Caustic, Non Flammable,
Bio-degradable, environmentally
friendly, Non carcinogenic
Microbial action effectively reduces
the waste to a non polluting product
at a glance
multiple uses
heavy industrial to home use
environmentally responsible
non-hazardous
powerful plant derived bitumen
remover
coats as well as cleans
safe and easy to use
odourless, non flammable
easy to use
Best results have been achieved
once dust and mud have been
removed and the surface
allowed to dry.
Then 1) apply BARC with a hand
held pressure sprayer and allow
to penetrate for 15 to 20
minutes.
2) Rinse off with a high pressure
spray preferably using hot water.
3) Heavily encrusted areas may
need a second application to
allow BARC to penetrate fully.
product applications
Formulated specifically to
remove Bitumen and Asphalt.
To be used on all Equipment
associated with the application
of bitumen and asphalt
Also removes bitumen from
concrete, paving’s, kerbs and
brick
Workshop floors and bench
tops. Can be used for coating as
well as cleaning equipment
9
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
Available sizes
5 LITRE 20 LITRE
200 LITRE 1000 LITRE
LOAD RELEASE
Load Release is a highly effective and
safe release agent, when applied it
assists on the release of bitumen as well
as extending the period between
having to clean the tray
New technology allows low volatility
products derived from alternative
sustainable sources to produce superior
results without the traditionally
accepted risks.
This technology is now available to
replace diesel and kerosene as a release
agent
how it works
Load Release is a completely bio
degradable alternative, the
application of Load Release
provides an active film designed
specifically to reduce the adhesion
of concrete, asphalt and bitumen
to surfaces by allowing it to slide
over the surface
easy to use
Ideally surfaces to be treated
should be free of bitumen, asphalt,
cement, concrete
or laterite/sand. In the case of
bitumen/asphalt we recommend
the use of B.A.R.C. Bitumen
remover.
Once the surface is clean apply
Load release using a low pressure
sprayer evenly over surfaces
needing protection in much the
same process as applying diesel
technical specifications
Derived primarily from natural edible
plant oils, and are free of VOC and the
customary traditional solvents
MSDS available on request
10
naturally safe
Unlike current anti adhesion products
Load Release is fully degradable both
chemically and biologically and poses
no hazard to the environment. It
provides a source of nutrition to
natural microorganisms in both water
and soil and will be degraded to
harmless molecules within a very
short time scale.
- is 100% biodegradable.
- is coloured so that even distribution
is achieved and not area missed
- There is no requirement for specialist
ventilation as there are no
carcinogenic fumes.
at a glance
safe and easy to use.
long lasting
100% biodegradable
Even coverage can be
achieved.
Very low levels of
contamination with asphalt
No degradation of asphalt
or concrete.
non-volatile.
Reduces cleaning costs
non flammable
product applications
Designed specifically for an anti
adhesion treatment Load Release
may be used on many surfaces to
prevent oily sticky materials from
adhering.
Its main application is for use on
vehicles carrying asphalt or
bitumen where it is sprayed onto a
previously cleaned surface.
All other equipment used for
spreading or applying asphalt or
bitumen can be pre-treated to
allow faster and more effective
cleaning with B.A.R.C.
Applying a coating of Load Release
can protect surfaces adjoining an
area to be asphalted, kerbs for
example; it is also particularly
useful for concrete shuttering
allowing a smooth release.
available sizes
200 LITRES / 1000 LITRES>
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
11
DUST
CONTROL
the solution:
Dust Control is a blend of
organic Ingredients that bind
dust particles for a considerable
period.
Dust Control can last for 12
months before re-application
Extremely cost effective
application:
Dust Control is sprayed over the area
at a rate of approximately one litre per
metre square using pressure or gravity
fed sprays on truck/tractor drawn
tankers.
For smaller areas use a
backpack spray or similar.
There is no
requirement to use
a daily watering
programme 12
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
Dust control is a 100%
environmentally safe and
completely biodegradable
technology.
IT is comprised of recycled organic
ingredients that once applied will
provide up to a 12 montth solution
to hazardous and disruptive dust
and particle iussues.
This cost effective method of
binding and surpressing the dust
results in working conditions
becoming workable and safe where
they were once hazardous
the problem:
Irritating conditions
Hazardous
Impairs Equipment
Disruptive to business
Affects Animals and people
Costly to control
Available sizes
200 LITRES / 1000 LITRES>
CORRO DIP
THE SAFE CORROSION
TREATMENT
Technical properties
Dilution: 5:1
Appearance Brown liquid
Odour Slight odour
Foam Slight
pH @ 1% 5.0-5.5
Environmental Data
Biodegradable, Iron content
dictates disposal
Easy to use
Dilute 5:1
Into a container, pour a sufficient amount
of CORRODIP ™ to completely cover
the rusted object
Immerse the rusty object in the solution
and leave it for 10 minutes for light rust
or overnight for extremely heavy rust.
CORRODIP™ has been proven
effective to remove even deep rust on
all types of mild steel and iron. It is
safe on all surfaces and will not harm
copper, brass, aluminum, plastic,
rubber or vinyl. CORRODIP™ is non-
toxic, non-corrosive, and
biodegradable and contains no acids
or alkalis. It is non-flammable and
contains no petroleum solvents.
Rapidly removes rust from ferrous
metal and stainless steel.
Available sizes
5 LITRE 20 LITRE
200 LITRE 1000
LITRE
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
13
at a glance
Non-toxic
No Fumes or bad odours
Biodegradable
Environmentally Safe
Non flammable
Non- corrosive
Will not harm un-rusted steel
Safe on other metals
Excellent rust effortlessly in
minutes
Contains no acids, Alkalis or
solvents
Will not affect rubber, plastic,
PVC, Copper, Brass Aluminium
or vinyl
PHOSBRITE
Phosbrite a mild acid, rust and scale remover
also used to brighten up aluminium and stainless
steel
product application
efficient for the removal of rust stains from paint
and metal
toilet cleaner and descaler of shower surrounds and
lime scale on glass
cleans and brightens metals such as aluminium and
stainless steel
easy to use
for rust scale remover dilute by 1:4 depending on
degree of rust/scale, wire brush first to remove loose
material apply phosbrite with brush spray or by
soaking, agitate with brush or wire wool. Rinse off, to
reduce further rusting spray surface with a 2% dilution
to leave a passivating layer of protection
for glazed tiles, toilets, baths basins, concrete and
terrazzo and for brightening aluminium and stainless
steel, dilute 10:1 and allow to soak for at least 10
minutes, agitate if possible then rinse off thoroughly
with water
technical specification
Phosphoric acid
Rust inhibitors
Non ionic surfactants
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
Available sizes
5 LITRE 20 LITRE
200 LITRE 1000 LITRE
14
CITRUS CLEAN
Citrus Clean a highly effective hand cleaner
containing fine pumice to clean deeply.
product application
citrus clean is a natural, pH balanced
hand cleaner and contains no
petroleum solvents
the active ingredient is d-limonene a natural solvent
derived from citrus has a fresh citrus fragrance
effective on grease, grime, inks, gasket cements, glues
and epoxies.
can be used without water, will not clog drains, can
be dispensed using a simple drum pump.
withstands all weather conditions without separation
contains a fine pumice which cleans deep into pores
with a gentle action that does not scratch.
Leaves hands smooth and non sticky
easy to use
take a small amount and using no water rub into
hands, wrists arms etc until dirt and grease are
dissolved . wipe dry or rinse off with water
20 L drum includes a high volume hand pump
15
Supplied by:
JCK DISTRIBUTORS Pty Ltd
+ 61 (08) 9403 0699
www.jckdistributors.com.au
Available sizes
5 LITRE 20 LITRE
Different dispensers can
be supplied upon
inquiry
Product Data Sheet
Anti-Spatter
FEATURES: • Biodegradable
• Non Toxic
• Non Carcinogenic
• Non Flammable
• No Methylene Chloride
• No Silicones
• Ideal for confined spaces
• Does not affect galvanisingprocess
• Test welds meet StandardAS/NZS 1554.1 2004 Category SP
PACK SIZES: • 750ml Spray Pack
• 5 Litre Jerry Can
USES:
• Welding anti-spatter for mig and arc welding
• Lubricant for cutting, tapping, drilling and pressing
• Corrosion and spatter protection of welding beds, robots and spot welders
• Preserver of leather gloves and aprons
• Welding nozzle protection
• Does not contain any silicones which will cause problems with painting the finished work
PHYSICAL PROPERTIES:
• Appearance: Light brown liquid with
distinctive wool fleece and solvent odour
• Boiling Point/Range:110-250
• Flash Point: 93.5°C
• Specific Gravity: 081-0.83 @ 20°C
• Solubility in Water: Very Low
• Viscosity: 12.50 cSt @ 25
°C
°C
CONTENTS: Lanolin, blended with non-regulated,non-ozone depleting paraffincarriers.
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-AS | Version 4.2 May 2013
[AS\SP-0750]
[AS\0005]
STORAGE & TRANSPORT:
• Lanotec Anti-Spatter is not classified asDangerous Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
PREPARATION:
• Lanotec Anti-Spatter will give best results when applied to a clean, dry surface.
• It is understood that not all areas can be cleaned or dried before application, but the applicationof Anti-Spatter will give far more benefits on a dirty surface than not applying Anti-Spatter at all.
• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.
• A light spray over the work and/or jig will prevent welding spatter sticking to the surface. A simplewipe with a cloth or rub with a wire brush will remove all spatter.
• Anti-Spatter may be pre-applied to parts and will act as a rust preventative as long as the productis not cleaned off the parts.
• Application of Lanotec Anti-Spatter to gloves and aprons will dramatically increase the life ofboth.
• Apply product sparingly, using the hand spray bottle. Spray over area to be protected. In mostcases one pump of the hand sprayer containing Lanotec Anti-Spatter will be sufficient to protectthe area coated.
• When applying to objects via spray, hold 30cm away from object. Start from the top and coatevenly from one side to the other.
• When coating vertical surfaces, always start at the top and work down using the same mistingtechnique.
• Coverage is approximately 20m² per litre. Only one coat is required.
REMOVAL:
• Where removal is necessary any strong solvent will remove Lanotec Anti-Spatter.
• Lanotec recommends the use of Lanotec Citra-Force or Lanotec PowaWash.
• Does not require removal for products to be galvanised. It is removed in the galvanising process.
Always read entire label before using product
Product Data Sheet
Anti-Spatter
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
APPLICATION:
Controlled Document - LAN00012-AS | Version 4.2 May 2013
Product Data Sheet
Citra-Force
FEATURES: • Biodegradable
• Derived from natural ingredients
•
• Water Soluble
Non Conductive to 22kV
• Will not affect pH
• Fresh citrus odour
PACK SIZES: • 400g Aerosol
• 750ml Spray Pack
• 1 Litre Jerry Can
• 5 Litre Jerry Can
• 20 Litre Cube
• 200 Litre Drum
CONTENTS: A citrus based liquid, blended withadditives to enable emulsificationwith water
USES:
• A powerful, all purpose, natural cleaner/degreaser concentrate
• Formulated to remove Lanotec lanolin based products
• Removal of thread dope from drill rods and casing
• Cleaning of electrical components and the decarbonisation of electric motors and windings
• A quick break degreaser, safe for biocycles
• Removal of waxes, adhesives, glues, lanolin, fats, grease, oils, carbon build up, chewing gum &acrylic paint overspray
• Cleaning of stainless steel & aluminium
• Cleaning of showers, toilets sinks, BBQ’s, pet stables, amenities, commercial ovens and exhaustcanopies (food grade)
Caution: Citra-Force affects certain polymers, do not use on rubber or plastics before testing on aninconspicuous area
PHYSICAL PROPERTIES:
• Appearance: Yellow-orange liquid
• Boiling Point: Approx. 176-300°C
• Flash Point: 55°C
• Specific Gravity: 0.85 @ 20°C
• Solubility in Water: Emulsifies
• Viscosity: 10.50 cSt @ 25 °C
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-CF | Version 4.2 May 2013
[CF\PP-0400]
[CF\SP-0750]
[CF\0001]
[CF\0005]
[CF\0020]
[CF\0200]
• Citra-Force is classified as DangerousGoods
• Store in accordance to local legislation ofDangerous Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
STORAGE & TRANSPORT:
Product Data Sheet
Citra-Force
APPROVALS:• AQIS Acceptaice of Chemical Compound for use in Export Meat Establishments -
Category 3 Cleaner Type C
• NZFSA Approval Cleaner/Degreaser C32
• Halal Certification Authority Australia - Taher Accreditation
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
APPLICATION GUIDE:
• Depending on the thickness and age of the build up.
• Remove any large build up by manually scraping where possible before applying Citra-Force.
• Apply Citra-Force directly to the contaminant to be removed, leave between 5 and 15 minutes,
and high pressure clean the affected area.
• For small electrical windings, spray on neat, leave for 15 minutes, and high pressure clean off.
• For large windings where carbon is not visible and embedded in the armature, dilute at 1:10
parts water in suitable tank and immerse motor and aerate for 24 hours. Remove and clean, then
check and resubmerge if necessary. Does not affect the varnish, and is non foaming.
• Spray on affected area, wipe clean with a damp cloth.
• Suitable for kitchen counters, floors, walls, bathrooms, range hoods, drains, grease traps and
overhead filters in commercial and domestic kitchens.
• Spray Citra-Force neat onto area, allow to stand for 5-10 minutes.
• Rub or scrape until adhesive is removed. Repeat as needed.
• Citra-Force is suitable for cleaning as it has a neutral pH.
• Spray on to area requiring cleaning, use clean cloth to dry.
• Spray on affected area neat, within 3 minutes work in with stiff bristled broom.
• For best results use a hot high pressure cleaner to remove.
• Spray Citra-Force neat onto threaded area with dope/anti-seize build up.
• Use coconut brush or similar to work product into threads, wipe residue off with clean rag.
• Does not affect the graph
rinse if required,
• Work on areas of less than 3m² at a time.
.
Controlled Document - LAN00012-CF | Version 4.2 May 2013
Machinery and Automotive Degreasing - [Neat - 1:5 parts water]
Decarbonising Electrical Rewinds - [Neat - 1:10 parts water]
General Purpose Cleaning - [1:5 - 1:20 parts water]
Adhesive Removal - [Neat]
Stainless Steel and Aluminium - [Neat - 1:5 parts water]
Bitumen removal - [Neat]
Thread Dope and Anti Seize Removal - [Neat]
Product Data SheetGeneral Purpose Liquid Lanolin
FEATURES: • Biodegradable
• Non Toxic
• Non Carcinogenic
• Non Evaporative
• Hermetically seals surface
• Resists wash off
• Non Conductive to 70kV
PACK SIZES: • 400g Aerosol
• 750ml Spray Pack
• 5 Litre Jerry Can
• 20 Litre Cube
CONTENTS: Lanolin, blended with an evaporativecarrier to enable ease of applicationand enhance penetration
USES:
• Penetrant, frees up rusted parts
• Protects against corrosion - moisture, salt & acid resistant
• Electrical component protection including connectors, switchgear, battery terminals, circuit boards,toggle switches & boxes
• Light lubricant, suitable for locks, hinges, cables, pins & struts. Ideal air tool lube
• Rejuvenates plastics, vinyls, leather, aluminium & power coated surfaces
• Protects and frees up tools, fasteners, fittings, hinges, locks & zippers
• Internal component preservation
• Lubricant for drilling, cutting, machining & pressing
PHYSICAL PROPERTIES:
• Appearance: Light brown liquid with
distinctive wool fleece & solvent odour
• Boiling Point: Approx. 110-200°C
• Flash Point: 68°C
• Specific Gravity: 0.81 - 0.83 @ 24°C
• Solubility in Water: Insoluble
• Viscosity: 11.50 cSt @ 25°C
STORAGE & TRANSPORT:• Only Aerosol is classified as Dangerous
Goods
• All bulk liquids are not classified asDangerous Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-GP | Version 4.2 May 2013
[GP\PP-0400]
[GP\SP-0750]
[GP\0005]
[GP\0020]
Product Data SheetGeneral Purpose Liquid Lanolin
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
PREPARATION:
• Lanotec General Purpose will give best results when applied to a clean, dry surface.
• It is understood that not all areas can be cleaned or dried before application, but the applicationof General Purpose will give far more benefits on a dirty surface than not applying GeneralPurpose at all.
• Lanotec General Purpose is soluble in oil, and therefore light oils on machined parts do not needto be removed before lubricating.
• Where short term mothballing of equipment is the ultimate aim, a good clean with a powerfuldegreaser before application of Lanotec General Purpose will give best results. Lanotecrecommends Lanotec PowaWash or Lanotec Citra-Force.
• Remove sources of ignitions, voltage and flame before use.
APPLICATION:
• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.
• Lanotec General Purpose can be applied via spray, brush, roller or lambs wool applicator.
• Lanotec provides a 750ml trigger bottle and a 1.5L pump up pressurised sprayer, for small tomedium coating jobs. For larger jobs recommended application is via a pump-up garden-typesprayer with Viton seals.
• Coverage is approximately 20m² per litre. Only one coat is required. If overapplied the coatingwill become tacky, and debris will stick to it. High pressure water blasting will remove the debrisand leave the Lanotec General Purpose behind.
• When applying to objects via spray, hold 30cm away from object. Start from the top and coatevenly from one side to the other.
• When the surface looks wet, you have applied enough product.
• Allow one hour drying time before putting equipment to use.
• If dust adhesion is undesirable, Lanotec General Purpose can be buffed to stop dust adhering.Dust and dirt adhesion is only to the protective coating, and when coating is removed equipmentwill revert back to original appearance.
REAPPLICATION:
• Reapplication is recommended every 3 months or when further lubrication is required.Reapplication is not required if stored out of direct sunlight (i.e. in a warehouse).
• Visual inspection is recommended daily until a suitable service interval has been identified.Reapply where required during service intervals.
• Wipe dirt and dust away from surface.
• Reapply as per application instructions above.
Always read entire label before using product
Controlled Document - LAN00012-GP | Version 4.2 May 2013
Product Data SheetGeneral Purpose Liquid Lanolin
TESTING:
General Purpose Liquid Lanolin has been tested by independent NATA certified laboratories using
the following:
Australian Standard test methods
• AS 1580.460.2 - Resistance to Acid & Alkali - Good acid resistance
• AS 2331.3.1 - Neutral Salt Spray (Corrosion)
Other Testing
• High Voltage Testing (Energex) - dry tested to 70kV - non conductive
APPROVALS:
• HACCP Australia Food Safety Accreditation Systems - Food Grade Lubricant
• AQIS Acceptaice of Chemical Compound for use in Export Meat Establishments -
Category 12 Lubricant Type C (Aerosol)
• NZFSA Approval Lubricant C12
• Halal Certification Authority Australia - Taher Accreditation
Category 10 Lubricant Type A (Bulk);
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-GP | Version 4.2 May 2013
Product Data SheetHeavy Duty Liquid Lanolin
FEATURES: • Biodegradable
• Non Toxic
• Non Carcinogenic
• Non Evaporative
• Hermetically seals surface
• Good resistance to mineral
acids/salts
• Resists wash off
• Non Conductive to 70kV
PACK SIZES: • 400g Aerosol
• 750ml Spray Pack
• 1L Spray Pack
• 5L Jerry Can
• 20L Cube
• 200L Drum
USES:
• For long lasting lubrication of moving parts in a highly corrosive environment
• Perfect for wire rope slings and all industrial chains (forklift) - non fling & non webbing
• Lubricates & protects pulleys, blocks, swivels, cables & chains
• Protection of electrical equipment including battery terminals, boxes & connectors
• Lubricates electrical cable for pulling through conduit
• Spray on anti-seize
PHYSICAL PROPERTIES:
• Appearance: Dark brown liquid with
distinctive wool fleece & solvent odour
• Boiling Range: 110-200°C
• Flash Point: 70°C
• Specific Gravity: 0.82 - 0.85 @ 20°C
• Solubility in Water: Insoluble
• Viscosity: 12.50 cSt @ 25°C
CONTENTS:
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-HD | Version 4.2 May 2013
[HD\PP-0400]
[HD\SP-0750]
[HD\SP-0001]
[HD\0005]
[HD\0020]
[HD\0200]
• Only Aerosol is classified as DangerousGoods
• All bulk liquids are not classified asDangerous Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
STORAGE & TRANSPORT:
Lanolin, blended with an evaporativecarrier to enable ease of applicationand enhance penetration
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Product Data SheetHeavy Duty Liquid Lanolin
PREPARATION:
• Lanotec Heavy Duty will give best results when applied to a clean, dry surface.
• It is understood that not all areas can be cleaned or dried before application, but the applicationof Heavy Duty will give far more benefits on a dirty surface than not applying Heavy Duty at all.
• Lanotec Heavy Duty is soluble in oil, and therefore light oils on machined parts do not need to beremoved before lubricating.
• Remove sources of ignitions, voltage and flame before use.
APPLICATION:
• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.
• Lanotec Heavy Duty can be applied via spray, brush, roller or lambs wool applicator.
• Lanotec provides a 750ml trigger bottle and a 1.5L pump up pressurised sprayer, for small tomedium lubrication jobs. For larger jobs recommended application is via a pump-up garden-typesprayer with Viton seals.
• When applying to objects via spray, hold 30cm away from object and apply to area requiringlubricating or protecting.
• For chains spray onto chain for one rotation only. Additional rotations will result in a waxy buildup.
• For wire ropes, spray on, then rotate rope 180 or submerge in a bath ofLanotec Heavy Duty.
• Allow one hour drying time before putting equipment to use.
• If dust adhesion is undesirable, Lanotec Heavy Duty can be buffed to stop dust adhering. Dustand dirt adhesion is only to the protective coating, and when coating is removed equipment willrevert back to original appearance.
° and spray other side;
REAPPLICATION:
• Visual inspection is recommended daily until a suitable service interval has been identified.Reapply where required during service intervals.
• On average, Lanotec Heavy Duty needs to be applied half as often as petroleum basedlubricants.
• Wipe dirt and dust away from surface.
• Reapply as per application instructions above.
Always read entire label before using product
Controlled Document - LAN00012-HD | Version 4.2 May 2013
Product Data SheetHeavy Duty Liquid Lanolin
TESTING:
Heavy Duty Liquid Lanolin has been tested by independent NATA certified laboratories using the
following:
Australian Standard test methods
• AS 1580.460.2 - Resistance to Acid & Alkali - Good acid resistance
• AS 2380 Clause 4.2 - Flameproof enclosure - Complies with standard
Other Testing
• High Voltage Testing (Energex) - dry tested to 70kV - non conductive
• Chemical Analysis (ETRS) - contains no heavy metals
To date Heavy Duty Liquid Lanolin has not been tested to AS 2331.3.1 - Neutral Salt Spray
(Corrosion). However as Heavy Duty Liquid Lanolin contains 40% more lanolin per litre than
General Purpose Liquid Lanolin the results given on the General Purpose Liquid Lanolin product
data sheet for this test may be taken as the minimum values to be obtained with Heavy Duty
Liquid Lanolin.
APPROVALS:
• HACCP Australia Food Safety Accreditation Systems - Food Grade Lubricant
• AQIS Acceptaice of Chemical Compound for use in Export Meat Establishments -
• NZFSA Approval Lubricant C12
• Halal Certification Authority Australia - Taher Accreditation
Category 10 Lubricant Type A (Bulk); Category 12 Lubricant Type C (Aerosol)
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-HD | Version 4.2 May 2013
Product Data Sheet
Release Agent
FEATURES: • For Formwork, Precast & Tilt Panel
• Concentrate (mix with water)
• Low suction between panels
• Resists rain wash off
• Compatible with most coating systems
• Biodegradable
• Non Toxic
• Non Evaporative
• Lubricates & protects fittings
PACK SIZES: • 2.9L Jerry Can
• 5L Jerry Can
• 20L Cube
USES:
• Formwork Release Agent
• Tilt Panel Bond Breaker
• Precast Mould Oil
• Lubricant for jacks & fittings
• Corrosion protection for tubes, jacks & fittings
• Protection of assets from concrete and paint overspray
PHYSICAL PROPERTIES:
• Appearance: Dark brown liquid withdistinctive wool fleece & solvent odour
• Boiling Point: Approx. 110-250°C
• Flash Point: 68°C; >100°C when diluted 1:6
• Specific Gravity: 0.82 - 0.85 @ 20°C
• Solubility in Water: Emulsifiable
• Viscosity: 16.50 cSt @ 25°C
DILUTION GUIDE:
CONTENTS: Lanolin, blended with an evaporativecarrier & surfactant. Mixes with water
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-RA | Version 4.2 May 2013
[RA\0003]
[RA\0005]
[RA\0020]
Concrete (mix @ 1:6 parts water)
Scaffolding (mix @ 1:4 parts water)
ContainerSize
Concrete@ 1:6
Scaffolding@ 1:4
2.9L 20L 15L
5L 35L 25L
20L 140L 100L
*Product is to be mixed with water
Product Data Sheet
Release Agent
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-RA | Version 4.2 May 2013
PREPARATION:
• Shake or stir Lanotec Release Agent concentrate to consistency before mixing with water
• Add concentrate to container then add water to achieve your desired dilution rate
• High quality sprayer recommended (Chapin brand or similar)
• For best results apply to a clean dry surface
• Apply a fine even coat with quality sprayer
• When using as a bond breaker, apply to the top of cured panel in 2 even diagonal opposingcoats. In extreme heat, the panels can be sprayed with water before Lanotec Release Agent isapplied, this reduces the amount of Release Agent absorbed by the cured panel
• If it rains after application, feel for waxy surface and judge if further application is required
• Continued use on formwork leaves surface clean after stripping; no cleaning required betweenpours, simply spray, pour, strip and repeat
• For best results, apply to the horizontal before erection (steel & aluminium) where practical
• Non staining for coloured concrete
• Can be applied after setting polystyrene block outs (does not affect polystyrene)
• If mopping the finish, use a new clean mop pre soaked in Lanotec Release Agent
• Safe for fibreglass, PVC, polypropylene and rubber moulds
• High performance for bullnose moulds
• Flush sprayer with water only
Always read entire label before using product
Tilt Panel
Formwork
Precast
COATINGS:
APPLICATION:
• Lanotec Release Agent degrades in the curing process of concrete
• If used to manufacturer specifications, chemical cleaning of theconcrete is not required before applying a coating system. High pressure water blast is all that isrequired for best results
• Adhesion testing as per AS 1580.408 indicates that Lanotec Release Agent did not causeadhesion failure of the coating systems at the coating/concrete interface of coating systems tothe cured concrete. For further information in regards to this please contact Lanotec Australia
Lanotec Release Agent is
Product Data Sheet
Timber Seal
FEATURES: • Biodegradable
• Non Toxic
• Non Carcinogenic
• Clear colour - highlights the grain
• Sprayable - save time
• Resists wash off
• Keeps timber nourished & supple
PACK SIZES: • 5L Jerry Can
• 20L Cube
USES:
• For dressed timber including decking & outdoor furniture
splitting &• Prevention of drying, cracking, wood rot
• For weatherproofing and highlighting natural grain
• For a natural matt finish
• Corrosion protection of metal fastenings & fittings
PHYSICAL PROPERTIES:
• Appearance: Light brown liquid withdistinctive wool fleece & solvent odour
• Boiling Point/Range: 110-250°C
• Flash Point: 66°C
• Specific Gravity: 0.81 - 0.83 @ 20°C
• Solubility in Water: Insoluble
• Viscosity: 11.25 cSt @ 25°C
CONTENTS: A blend of lanolin and an evaporativecarrier, with UV stabilisers andanti-fungal/anti-mould treatment
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-TS | Version 4.2 May 2013
[TS\0005]
[TS\0020]
STORAGE & TRANSPORT:• All sizes are not classified as Dangerous
Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
Hardwood NEW 10-15m²/L
Hardwood OLD 8-10m²/L
Softwood NEW 8-10m²/L
Softwood OLD 6-8m²/L
COVERAGE GUIDE:
• Approximate only
Product Data Sheet
Timber Seal
PREPARATION:
• All new (green) timber structures should be allowed to settle for a minimum of 3 months beforeapplying any coating system. If treated before this, there is a risk of resins and tannins rising tothe surface, causing black spots.
• If the timber is freshly milled or “green”, only apply inside joints and on bolts and fastenings.Allow timber to weather further before applying Timber Seal.
• Previously untreated timber should be treated against mould and/or fungus spores (use anybroad spectrum agent) before applying Timber Seal.
• High levels of tannin and oily resins or high moisture content in the timber will affect thepenetration rate of Timber Seal which can lead to a poor finish of the coated surface. It isimportant that the timber is clean and dry before applying Timber Seal.
• Can be used on timber previously coated with decking oil. Timber must be showing signs ofdryness before applying Timber Seal.
• If the timber has turned grey due to weathering, sand surface lightly and clean thoroughly beforeapplying Timber Seal. To restore colour without sanding, see below in regards to using tint.
• Ensure timber is dry, and free of dirt & dust before applying Lanotec Timber Seal - High pressureclean then leave 24 hours to dry.
APPLICATION:
• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.
• Refer to coverage guide. Measure area of timber to be protected. Only use the recommendedvolume of product. Over application will cause tackiness on the surface of the timber.
• For decking surfaces and other dressed timber, Timber Seal is best applied by spraying via agarden type sprayer. A flat lamb’s wool applicator may be used to evenly spread the appliedproduct. For the underside of external decking and structural timbers, apply by spray, preferablyprior to construction.
• The final coat of exposed dressed timber surface can be polished/buffed to the natural wax toremove residue, maximise the protective seal and to highlight the natural grains.
• 6 hours drying time is recommended.
• Lanotec Timber Seal is compatible with most oil based tints, if the timber is dry it will accept a tintmixed into the Timber Seal at a rate of 2.5% (25ml per 1L). However it is advisable to conduct apenetration test with an off-cut or in an inconspicuous area first.
• Timber Seal is not compatible with acrylic water based products.
• For best results use Lanotec Type A Grease on end grains; and all fasteners - to lubricate thefastener, and to seal the hole.
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Always read entire label before using product
Controlled Document - LAN00012-TS | Version 4.2 May 2013
dry time
Citra
-Forc
e
Product Data Sheet
Timber Seal
REAPPLICATION:
• A simple water test should be carried out on previously treated structure. If the water beads, thetimber is still protected. If the water is absorbed, reapplication is required.
• Typically an annual reapplication is all that is required; although two applications isrecommended in the first 12 months, to ensure adequate build up below the surface of the timber(as lanolin has an accumulative effect).
CLEANUP & CLEANING:
• Use Lanotec Citra-Force or mineral turps. For cleaning decks use warm soapy water.
• If Timber Seal is over applied resulting in a tacky surface, the excess can be cleanedoff using a solvent or degreaser. Lanotec Citra-Force at 1:10 parts luke warm water isideal for this purpose.
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Always read entire label before using product
Controlled Document - LAN00012-TS | Version 4.2 May 2013
Product Data Sheet
Timber Seal PLUS
FEATURES: • Biodegradable
• Non Toxic
• Non Carcinogenic
• Non Evaporative
• Resists wash off
• Sprayable - save time
• Can be used in environmentally
sensitive areas
• Keeps timber nourished & supple
PACK SIZES: • 20L Cube
USES:
• Formulated for rough sawn timber only
• Perfect for boardwalks, bridges, jetties and wharf infrastructure
• Penetrates timber surfaces
• Prevents drying, wood rot & splitting
• Weatherproofs timber
• Prevents corrosion of metal fastenings & fittings
• Note: Timber Seal PLUS is not recommended for dressed timber including domestic decking
& furniture. Please use Lanotec Timber Seal for any dressed timber applications.
PHYSICAL PROPERTIES:
• Appearance: Light brown liquid withdistinctive wool fleece & solvent odour
• Boiling Point: Approx. 110-250°C
• Flash Point: 67.5°C
• Specific Gravity: 0.82 - 0.84 @ 20°C
• Solubility in Water: Insoluble
• Viscosity: 12.50 cSt @ 25°C
CONTENTS: A blend of lanolin and paraffiniccarrier solvents, with UV stabilisersand anti-fungal/anti-mould treatment
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-TSP | Version 4.2 May 2013
[TS\P020]
STORAGE & TRANSPORT:
• Timber Seal PLUS is not classified asDangerous Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
COVERAGE GUIDE:
• Approximately 5m² to 6m² / litre
Product Data Sheet
Timber Seal PLUS
APPLICATION GUIDE:
• Previously untreated timber must be treated against mould and/or fungus spores (use any broadspectrum agent) before applying Timber Seal PLUS.
• If the timber is freshly milled or “green”, only apply inside joints and on bolts and fastenings.Allow timber to weather further before applying Timber Seal PLUS.
• Can be used on timber previously coated with decking oil. Timber must be showing signs ofdryness before applying Timber Seal PLUS.
• If the timber has turned grey due to weathering, sand surface lightly and clean thoroughly beforeapplying Timber Seal PLUS. To restore colour without sanding, see below in regards to using tint.
• The moisture content of the timber will also affect the rate of absorption, which can lead to apatchy colouring of the timber. High levels of tannin and oil resins can also lead to this effect.Therefore it is important that the timber is as clean and dry as reasonably possible beforeapplying Timber Seal PLUS.
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Always read entire label before using productPREPARATION:
• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.
• Refer to coverage guide. Measure area of timber to be protected. Only use the recommendedvolume of product. Over application will cause tackiness on the surface of the timber.
• All timbers are different and display differing rates of absorption, i.e. hardwoods are lessabsorbent than softwood such as pine. This should be taken into consideration when determiningcoverage rate.
• For the best results Timber Seal PLUS should be applied to clean, dry surfaces, by a garden-type sprayer or roller.
• Lanotec Timber Seal PLUS is compatible with most oil based tints, if the timber is dry it willaccept a tint mixed into the Timber Seal PLUS at a rate of 5%. However it is advisable to conducta penetration test with an off-cut or in an inconspicuous area first.
.
Controlled Document - LAN00012-TSP | Version 4.2 May 2013
ROUGH SAWN TIMBER (GENERAL & MAJOR CONSTRUCTION):
Construction Stage:
Finishing Stage:
• Spray Lanotec Timber Seal PLUS on bearers, joists, end grains, checkouts, drill holes etc beforeassembly. For base plates, large bearers (e.g. Wharves and timber bridges), bollard capping andthreaded rods and bolts use Lanotec Type A Grease.
• Timber Seal PLUS and Lanotec Type A Grease can be easily combinedto produce a slurry that overcomes application problems in cold weather.
• Apply one coat of Timber Seal PLUS using a direct spray method to minimise overspray, orlambs wool roller. Allow six hours before walking on structure.
Product Data Sheet
Type A Grease
FEATURES: • Non Perishing to rubber
• Stops galling & binding
• Di-electric properties to 70kV
• Food Grade
• Long-term Biodegradable
• Non Toxic
• Non Carcinogenic
• Non Leaching
• Acid & Salt Resistant
PACK SIZES: • 250ml Tube
• 235ml Tub
• 500ml Tub
• 1 Litre Pail
• 4 Litre Pail
• 20 Litre Pail
USES:
• Anti-seize for threaded rod, nuts & bolts
• Assembly lubricant
• Wire rope lubrication and corrosion protection
• Lubricant for rubber hoses, linkages, pivot pins & bushes
• Stops electrolysis due to similar metals
• Belt dressing
• Corrosion & moisture proofing for multi-pin connectors
• Prevents galling of stainless steel and aluminium
PHYSICAL PROPERTIES:
• Appearance: Light brown coloured solid
• Boiling Point: Approx. >250°C
• Flash Point: >200°C
• Specific Gravity: 0.90 @ 20°C
• Solubility in Water: Insoluble
CONTENTS: Pure industrial grade lanolin
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-GS | Version 4.2 May 2013
[GS\250T]
[GS\0235]
[GS\0500]
[GS\0001]
[GS\0004]
[GS\0020]
• Lanotec Type A Grease is not classified asDangerous Goods
• No specific storage required
STORAGE & TRANSPORT:
Product Data Sheet
Type A Grease
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-GS | Version 4.2 May 2013
APPLICATION:
• Smear onto thread and underside of bolt head. Wipe off excess before tensioning.
• Fill one half of electrical plug to create moisture / dust proof barrier before reconnecting electricalconnector.
• Smear grease between dissimilar metals before tightening.
• Smear one flange face only for use as a soft seal gasket.
• Smear O-ring or seal with Type A Grease to hold in place during assembly.
• For wire rope: wipe onto wire rope by hand whilst undertaking regular inspection, or usepressurised applicator such as Masto, Viper, or Raptor.
• Apply directly to squealing belt as a belt dressing (softens and moisturises belt).
• Apply via pump or hand to all shafts and pins prone to drying out or seizing.
Always read entire label before using product
APPROVALS:
• HACCP Australia Food Safety Accreditation Systems - Food Grade Lubricant
• AQIS Acceptaice of Chemical Compound for use in Export Meat Establishments -
Category 10 Lubricant Type A
• NZFSA Approval Lubricant C12
• Halal Certification Authority Australia - Taher Accreditation
REMOVAL:
• If removal of Lanotec Type A Grease is required, Lanotec Citra-Force or Lanotec PowaWash is
recommended
Product Data Sheet
U.P. (Ultimate Protection)
FEATURES: • Long-term Biodegradable
• Non Toxic
• Non Carcinogenic
• Non Evaporative
• Non Leaching
• Hermetically Seals Surface
• Acid & Salt Resistant
PACK SIZES: • 750ml Spray Pack
• 5 Litre Jerry Can
• 20 Litre Easy Pour
• 200 Litre Drum
USES:
• Corrosion protection in harsh & highly corrosive environments
• Component storage protection
• Corrosion protection for shipping
• Mining equipment (above & below ground)
• Fertiliser & chemical storage facilities & equipment
• Agricultural vehicles including trucks, trailers and agbikes
• Corrosion protection for drill pipe and drill casing OD and ID
• 4WD underbody protection
PHYSICAL PROPERTIES:
• Appearance: Dark brown liquid with
distinctive wool fleece odour
• Boiling Point/Range: 183-500°C
• Flash Point: 69°C
• Specific Gravity: 0.85 @ 20°C
• Solubility in Water: Insoluble
• Viscosity: 11.50 cSt @ 25°C
STORAGE & TRANSPORT:
CONTENTS: Enhanced lanolin blended withan evaporative carrier. Liquid thatforms a protective skin.
• Not classified as Dangerous Goods
• Non-flammable
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-UP | Version 4.2 May 2013
[UP\SP-0750]
[UP\0005]
[UP\0020]
[UP\0200]
PREPARATION:
• Lanotec U.P. will give best results when applied to a clean, dry surface.
• It is understood that not all areas can be cleaned or dried before application, but the applicationof U.P will give far more benefits on a dirty surface than not applying U.P. at all.
• Lanotec U.P. is soluble in oil, and therefore light oils on machined parts do not need to beremoved before coating.
• Lanotec U.P. will stop surface rust in its tracks, so no need to remove surface corrosion.
• Where corrosion is intense, the removal of large chunks and flaky areas will reduce the amountof product required.
• Where long term mothballing of equipment is the ultimate aim, a good clean with a powerfuldegreaser before application of Lanotec U.P. will give best results. Lanotec recommends LanotecPowaWash or Lanotec Citra-Force.
• Remove sources of ignitions, voltage and flame before use.
APPLICATION:
• Shake container to ensure product is mixed correctly. Colder climates will require extra agitation.
• Lanotec U.P. can be applied via spray, brush, roller or lambs wool applicator.
• Lanotec provides a 750ml trigger bottle and a 1.5L pump up pressurised sprayer, for small tomedium coating jobs. For larger jobs recommended application is via a pump-up garden-typesprayer with Viton seals or an air-driven or air-less painting system.
• Coverage is approximately 20m² per litre. Only one coat is required. If over applied the coatingwill become tacky, and debris will stick to it. High pressure water blasting will remove the debrisand leave the Lanotec U.P. behind.
• When applying to objects via spray, hold 30cm away from object. Start from the top and coatevenly from one side to the other.
• When the surface looks wet, you have applied enough product.
• Allow one hour drying time before putting equipment to use.
• If dust adhesion is undesirable, Lanotec U.P. can be buffed to stop dust adhering. Dust and dirtadhesion is only to the protective coating, and when coating is removed equipment will revertback to original appearance.
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Product Data Sheet
U.P. (Ultimate Protection)
REAPPLICATION:
• Reapplication is recommended every 12 months if outside. Reapplication is not required if storedout of direct sunlight (i.e. in a warehouse).
• Visual inspection is recommended after six months where products are stored or operating in acorrosive environment. Reapply where required during service intervals.
• High pressure clean dirt and dust from surface. Allow to dry.
• Reapply as per application instructions above.
Always read entire label before using product
Controlled Document - LAN00012-UP | Version 4.2 May 2013
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
Product Data Sheet
Wire Rope Lube
FEATURES: • Semi fluid grease
• Long-term Biodegradable
• Non Toxic
• Non Carcinogenic
• Provides long lasting lubrication and
corrosion protection
• Penetrates to the core of the rope
• Acid & Salt Resistant
PACK SIZES: • 20 Litre Pail
• 20 Litre Cube
USES:
• Suitable for all wire ropes above 16mm or any wire ropes operating in corrosive environments
• Ideal for use around waterways and coastal environments
• Lubrication of ropes in environmentally sensitive areas where salt water is an issue
• Ideal for rig and marine cranes, or any wire ropes working in the splash zone
PHYSICAL PROPERTIES:
• Appearance: Light brown liquid with
distinctive wool fleece & solvent odour
• Boiling Point: Approx. 110-200°C
• Flash Point: 68°C
• Specific Gravity: 0.81 - 0.83 @ 20°C
• Viscosity: 17 cSt @ 25
• Solubility in Water: Insoluble
°C
CONTENTS: Lanolin, blended with an evaporativecarrier to enable ease of applicationand enhance penetration
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-WRL | Version 4.2 May 2013
[HW\RL20-PAIL]
[HW\RL20-CUBE]
• Lanotec Wire Rope Lube is not classified asDangerous Goods
• Keep in cool, dry, well ventilated place
• Keep out of reach of children
STORAGE & TRANSPORT:
NATURALLY BETTERwww.lanotec.com.au | www.youtube.com/LanotecAus
Contact Details for further information:
Product Data Sheet
Wire Rope Lube
For safe handling of this product, please consult the
product material safety data sheet (MSDS)
Controlled Document - LAN00012-WRL | Version 4.2 May 2013
PREPARATION:
• Inspect wire rope for damage by cheese cloth method.
• Lanotec Wire Rope Lube is compatible with all oil based manufacturers lubricants.
• Clean wire rope if practical for best results using wire brush or high pressure water to removeforeign debris.
APPLICATION:
• Shake or stir Lanotec Wire Rope Lube until a uniform consistency is achieved.
• Lanotec Wire Rope Lube can be sprayed when above 25
• Place catching container under lube zone to collect any spills or overflow.
• Apply enough Lanotec Wire Rope Lube to fill the valley of the wire rope only.
• Can be applied via the CoreLube 950 SER. or similar oiling system.
°C, or can also be hand applied orbrushed on at any temperature.
REAPPLICATION:
• With wire ropes over 16mm a quarterly visual inspection is recommended. Lanotec Wire RopeLube should be reapplied at this time.
• Because Lanotec Wire Rope Lube is a long lasting high performance product, it can be reappliedduring your normal wire rope lubrication service intervals.
Always read entire label before using product
service and support
JCK DISTRIBUTORS believe in building strong partnerships with our customers who share similar
values.
In order for this relationship to develop JCK likes to understand their customers business and their
future requirements so we can provide backup, support and customize our products to meet their
needs. We are dedicated to providing a professional knowledgeable service to our customers
backed by high performance products. Our technical sales team will work directly with you and
recommend the best product suitable for your application requirements. We pride ourselves in
continuous improvements. Long life - performance that outlasts the rest
Please contact us to see how we can assist in solving your cleaning challenges
JCK DISTRIBUTORS Tel: 61 (08) 9403 0699
46 KORELLA STREET MULLALOO PERTH WESTERN AUSTRALIA
environmentally preferred solutions
www.jckdistributors.com.au