TECHNICAL SPECIFICATIONS • Heat-shrinkable polyvinyl chloride capsule • 0 to 4 venting holes possible on the top disc • Height between 45 mm and 75 mm* • 75 micons extruded PVC * Any other desired size shall be a subject for further study PRINTING COLORS & FINISH • Rotogravure printing • Possibility to print up to 4 colors with different finishing touches: matte / shiny / glossy / pearly • Color-match research for any order from 50,000 capsules * Colors are referred in Janson Capsules’ color chart CUSTOMIZATION OPTIONS • Customization with rotogravure printing on skirt. • Customization with hot-stamping or rotogravure printing on top-disc • 14 hot-stamping colors* on stock with metallic, matte and shiny finish • Embossing on top-disc • Tear tab location * Colors are referred in Janson Capsules’ color chart PRODUCT QUALITY • Quality procedures in place to control the product appearance, the product functionality and the product size • Materials certificate of conformity (available upon request) • BPA free (certificate available upon request) JANSON CAPSULES USA - A DIVISION OF JANSON CAPSULES GROUP WWW.JANSONCAPSULESUSA.COM TECHNICAL SPECIFICATION PVC CAPSULES DIAMETER (MIN and MAX) 29.6mm to 38.6mm TAPER ANGLE (MIN and MAX) 2 to 3.5 degrees HEIGHT (MIN and MAX): 45mm to 75 mm