TECHNICAL SPECIFICATIONS • Polylaminate capsule • Aluminium top-disc with thermobonding side • 0 to 4 venting holes possible on the top disc • Height between 50 mm and 60 mm* * Any other desired size shall be a subject for further study PRINTING COLORS & FINISH • Rotogravure printing • Standard colors* available in a shorter lead time • Possibility to print up to 4 colors with different finishing touches: matte / shiny / glossy / pearly • Color-match research for any order from 35,000 capsules * Colors are referred in Janson Capsules’ color chart CUSTOMIZATION OPTIONS • Customization with hot-stamping or printing on skirt • Customization with hot-stamping or printing on top-disc • 14 hot-stamping colors* on stock with metallic, matte and shiny finish • Embossing on top-disc * Colors are referred in Janson Capsules’ color chart PRODUCT QUALITY • Quality procedures in place to control the product appearance, the product functionality and the product size • Materials certificate of conformity (available upon request) • BPA free (certificate available upon request) JANSON CAPSULES USA - A DIVISION OF JANSON CAPSULES GROUP WWW.JANSONCAPSULESUSA.COM TECHNICAL SPECIFICATION POLYLAM CAPSULES A. NITROCELLULOSE LACQUER B. ALUMINIUM LAYER C. POLYETHYLENE LAYER D. ALUMINIUM LAYER E. NITROCELLULOSE LACQUER A B C D E PRODUCT COMPOSITION DIAMETER (MIN and MAX) 28.9mm to 31.8 mm TAPER ANGLE (MAX) 1.1 degrees NOZZLE HEIGHT 5mm HEIGHT (MIN and MAX): 50mm to 60 mm