"ITDI-DOST'S EXPERIENCE IN TECHNOLOGY TRANSFER AND COMMERCIALIZATION IN THE AREA OF NANOTECHNOLOGY". by Blessie A. Basilia, PhD Industrial Technology Development Institute, Department of Science and Technology Bicutan, Taguig City, Metro Manila, Philippines 1631 [email protected], [email protected]
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
"ITDI-DOST'S EXPERIENCE IN
TECHNOLOGY TRANSFER AND
COMMERCIALIZATION IN THE AREA
OF NANOTECHNOLOGY".
by
Blessie A. Basilia, PhD Industrial Technology Development Institute, Department
of Science and Technology
Bicutan, Taguig City, Metro Manila, Philippines 1631
R & D Area Thrusts
National R& D Priorities Plan
ENVIRONMENT
ALTERNATIVE
ENERGY
HEALTH AND
HEALTH PRODUCTS
OTHER PRIORITY AREAS
BIOTECHNOLOGY AGRICULTURE AND
FOOD
NANOTECHNOLOGY
MANUFACTURING
& PRODUCTION
DOST Outcome
Innovative, cost-effective and appropriate
technologies that enable MSMEs to develop
and produce competitive products that meet
world-class standards
TECHNOLOGY TRANSFER AND
COMMERCIALIZATION
RESEARCH PROOF OF CONCEPT
(LAB SCALE)
DEVELOPMENT (BENCH/ PILOT
TESTING/FIELD TRIALS)
FIELD TESTING
ROLL-OUT
ENGAGEMENT, COLLABORATION, CONVERGENCE,
ADOPTION Including Involvement of
concerned govt line agencies
COMMERCIALIZATION
DOST-ITDI
Problem with water pollution and accessibility to
potable drinking water has become a global crisis
In the Philippines, access to clean and safe
drinking water remains a problem both in rural
and urban areas
o 20% of total population – no access to potable
water (NSO)
o 432 municipalities with 50% service coverage
(waterless municipalities)
o 6,000 premature deaths a year caused by water-
borne diseases
DOST-ITDI
17%
8%
9%
46%
15% 5%
Potable Water Supply Sources
Water Districts
Big Private Operators
Self-Provision
Community-BasedAssociation/NGO's
Unimproved WaterSources/Roofwater
SSIP(mostly truckers)-suppliers
DOST-ITDI
Water Consumption: 8 glasses per
day/person
Total Philippine Population: 104 million
(as of 2013)
Costs of purified water:
350 ml - P10.00
500 ml - P13.00
1 L - P20.00
5 gals – P35.00-P40.00
Contaminants such as microorganisms and particulates
present in tap and ground water cause the spread of
water-borne diseases
Micro-filtration (e.g. ceramic-based micro-filters) is a
proven technique to take out such contaminants
The DOST thru ITDI can provide an innovative solution
in ceramic filtration to take out microbial/particulate
contaminants in drinking water for use in household
level
ceramic filter with NANO anti- microbial
coating
Tarlac La Union
Ilocos Sur
Pampanga
Sorsogon
Camarines Sur
Leyte Bacolod Daro
Cagayan de Oro Bukidnon Lanao del Norte
Misamis Oriental
South Cotabato Sultan Kudarat
Davao
Aurora
- With potential as ceramic filter raw material
Isabela
Aklan
Formulated with red clay and
coated with nano anti-microbial
agent to eliminate water borne
microorganisms;
Purifies tap water, deep well
water and raw water (from
ponds and spring);
Lodged in a plastic container
provided with a faucet at the
bottom for collection of the
filtered water.
Easy to install/assemble
Easy to handle and
maintain
Reasonably priced
Makes safe, potable
drinking water readily
available and accessible
even in remote areas.
Distributed pot filters to NHA households
in Muntinlupa City and Cagayan de Oro
City
Feedbacks/Comments:
Nagagamit sa pagluluto
Masarap ang lasa ng tubig
Nakatipid sa pagbili ng mineral water
Maayos walang problema
Medyo mabigat
Matrabaho
Kailangan maingat sa paglinis
Sa unang paggamit, may amoy ang tubig
There was no reported/observed adverse
effect on the health of the users.
MICROBIOLOGICAL QUALITY
TESTS
Test/Analysis Test Results
Raw
Water
Remarks Filtered
Water
Remarks
Heterotrophic Plate count (per ml
sample, in agar plate, 35oC, 48 hrs
incubation)
290,000 Failed 56 Passed
Presence/Absence Test for Coliform positive Failed negative Passed
Total Coliform Count (MPN/100ml
sample)
more
than 8.0
Failed < 1.1 Passed
Escherichia coli Count (MPN/100ml
sample)
2.6 Failed < 1.1 Passed
Presence/Absence Test for
Escherichia coli (per 100 ml of sample)
positive Failed negative Passed
PNS for drinking water: HPC: <500 colonies per ml
Total coliform ( presence /absence test) : Negative
Total coliform : < 1.1MPN/100ml
Specifications/Costing
M O D E L
Ceramic Pot Filter
6L 1.5L
Weight , kg (Ave) 3.2 0.8
Max Flow Rate (NHA Deep Well) 3 L/h n/a
Max Flow Rate (Tap Water) 3 L/h 2 L/h
Production Cost / pc P 215 P 85
Cost of Plastic Assembly P 225 P 70
Unit Cost (ceramic+plastic) P 440 P 155
• For Roll-out in
various Regions
(1, 3, 5, 8, 10, 12)
to produce 1
million pcs of
ceramic pot
filters
Beneficiaries: communities with less access
to potable drinking water
Partner Agencies: LGU’s, NGO’s, Pottery
Owners
Total Project Cost: PhP 17, 361, 057.00
DOST – CO SETUP : P 9,845,084.00
DOST ROs : P 1,937,026.00
Proponents : P 5,578,947.00
PROJECT BENEFICIARIES/PARTNER
AGENCIES/BUDGET
PRODUCTION OF CANDLE TYPE CERAMIC
FILTER
Green wares (Vigan red clay) Candle Type Ceramic
Filter Assembly.
Candle Type Ceramic Filter
Assembly.
• ]PORE TOMOGRAPHY
• PORE SIZE – 0.4 mm (max)
• VOIDS – 12%
Volume of sample: 1,061 cu. mm.
RAW MATERIAL CHARACTERIZATION
R
• Raw materials testing and
evaluation PROPERTIES RESULTS
Ave. H2O of Plasticity, % 34.45
Ave. Drying Shrinkage, % 10.34
Workability/plasticity Good
Raw Color Grayish brown
Dry Color Light grayish brown
Green wares (Vigan red clay)
• Assessment of the red clay
deposit
PRODUCT CHARACTERIZATION
• Fired product :
testing and
evaluation
• Optimization of
process
parameters
PROPERTIES RESULTS
Firing Shrinkage, % 0.78
Total Shrinkage, % 11.12
Water Absorption, % 19.4
Porosity, % 30.6
Bulk Density, g/cc 1.57
General Appearance No crack,
brick orange in
color
Compressive
Strength, kg/cm2
170.9
Flow rate (formulated
body),
liters/hr
2-3
DISTRIBUTION @
REHABILITATION SITE
PRODUCTION @ ITDI-DOST
TERIMA KASIH!
Related Documents
