IQD Company Presentation

Standing out from the crowd

History

2

1973 – Founded in UK 1979 – Established first crystal factory 1998 – Acquired by CMAC 2007 – Acquired by Rakon Ltd 2008 – MBI by previous management team 2012 – Opened US Sales Office

40+ years as a manufacturer & supplier of frequency products

3

IQD Locations Worldwide

Sales Offices Distributors Representatives Customers

4

Strong constant improvement culture

About Us Manufacture frequency products with

the following capacities: Crystals - 30 Million per month Oscillators - 10 Million per month VCXOs - 3 Million per month TCXOs - 1.5 Million per month OCXOs – 6000 per month

Supporting customers worldwide Trusted partner of global companies Authorised Partner for Rakon & Statek

5

Worldwide Sales Over 3,500 active customers in

over 60 countries

Leading position in European market

64%

21%

14% 1%

Europe Asia Americas Other

6

Global Distribution Channels

Global Distribution Channels

7

Broad Market Engagement Aerospace Automotive Communications Computing Consumer Industrial Instrumentation Medical Military Test & Measurement

All markets other than space supported

Full circuit characterisation service

Engineering Support Services Application support for new designs &

problem resolution Sample development for prototypes Full electrical testing & screening Crystal test data for electrical modelling

by customer (i.e. motional parameters) Frequency/temperature testing with

customer specific ramp-profiles Product burn-in, heat-soak &

accelerated ageing Full circuit characterisation service MTIE/TDEV testing 8

9

ISO9001 approved since 1988

Quality Process Management ISO9001 approved since 1988 Automotive products to AEC-Q200 &

TS16949 release with full PPAP System controlled quality assurance:

Suppliers & purchase material Change & Failure Management Calibration & Measurement 8D Quality Reports

Moisture Sensitivity Level (MSL) compliance

Full traceability

10

Over 70,000 parts & millions of units ex-stock

Comprehensive Product Range >1000 Models Quartz Crystals including Automotive to

AEC-Q200/TS16949 Crystal Clock Oscillators including fast

make programmable & Automotive to AEC-Q200/TS16949

VCXOs TCXOs & VCTCXOs OCXOs Advanced Modules including GPS

disciplined models Rubidium Oscillators

11

Packages down to 1.55 x 0.95mm

Quartz Crystals SMD & thru hole packages 10kHz to 270MHz Frequency Tolerances from ±5ppm Frequency Stabilities from ±5ppm

(depending on temperature range) Operating Temperature Range

from –55 to 225°C Extreme high shock & vibration versions

available Automotive & Industrial models to

AEC-Q200/TS16949

12

Lowest cost SMD package

Standard Crystal: HC49/4HSMX SMD & thru hole packages 3.2MHz to 100MHz Frequency Tolerances from ±10ppm Frequency Stabilities from ±15ppm

(depending on temperature range) Operating Temperature Range

from –55 to 105°C Automotive version available Typical applications:

Home automation, process control, security systems, routers, telemetric systems

13

5 x 3.2mm ceramic package

Industry Standard Crystal CFPX-104 5 x 3.2mm ceramic package 8 to 52MHz (Fund),

40 to 133MHz (3rd OT) Ageing ±3ppm max in first year Tolerance & stability from ±10ppm;

-40 to 85°C Typical applications:

Industrial: Security systems, fire alarms, home automation, utility smart meters, POS systems

Communications: Bluetooth, Zigbee, RF modules, Wi-Fi & WiMAX, DAB radio

Green energy: Solar panels, smart meters

Industry Standard Crystal CFPX-180

14

3.2 x 2.5mm ceramic SMD package 10 to 200MHz (Fundamental) Tolerance & stability from ±10ppm, max

operating temperature -40 to 85°C Typical applications:

Industrial: Security systems, fire alarms, home automation, utility smart meters, POS systems

Communications: Bluetooth, Zigbee, RF modules, Wi-Fi & WiMAX, DAB radio

Green energy: Solar panels, smart metersLowest cost ceramic package

15

One of the world’s smallest quartz crystals

Ultra-Miniature Crystal IQXC-42 2.0 x 1.6 x 0.5mm high ceramic package Operating temp range -40 to 85°C Frequency range from 20 to 50MHz Frequency stabilities down to ±10ppm Typical applications:

Portable equipment such as hand held inventory control devices, battery powered telemetry equipment, notebook computers and surveillance devices

16

Frequency Stabilities from ±5ppm

Crystal Clock Oscillators (SPXOs) SMD & thru hole packages 10kHz to 1500MHz Frequency Stabilities from ±5ppm

(depending on required temperature range)

Operating temperature range from-55 to 200°C

Voltages: 1.8, 2.5, 2.8, 3, 3.3 & 5V Outputs: HCMOS, TTL, LVPECL, LVDS Automotive & Industrial models to

AEC-Q200/TS16949

17

Stability from ±20ppm over -40 to 85°C

Industry Standard SPXO CFPS-72/3 7 x 5mm ceramic package CFPS-73 (3.3V) 0.5 to 157MHz

CFPS-72 (5V) 0.5 to 100MHz Ageing max ±3ppm in first year 3.3 & 5V CMOS/TTL Stability from ±20ppm over -40 to 85°C Typical applications:

Industrial: Process control, security systems Communications: Data comms, Ethernet,

routers

18

Current consumption 20mA typical

Industry standard SPXO CFPS-9 5 x 3.2mm ceramic package Current consumption 20mA typical Frequencies 0.5 to 160MHz 3.3V CMOS; ageing max ±3ppm first year Stability from ±25ppm over -40 to 85°C Typical applications:

Industrial: Process control, security systems Communications: Data comms, Ethernet,

fibre channel, optical networking

19

Stability from ±25ppm over -40 to 85°C

Industry standard SPXO CFPS-39 3.2 x 2.5mm ceramic package Current consumption 7mA typical 2 to 50MHz Ageing max ±3ppm in first year 3.3V CMOS Stability from ±25ppm over -40 to 85°C Typical applications:

Industrial: process control, security systems Communications: data comms, Ethernet,

Wi-fi & WiMAX

Low Jitter/Noise SPXO: IQXO-931

20

2.5 x 2.0 x 1.0mm ceramic package 0.5ps integrated RMS phase jitter 8 to 1500MHz Stability from ±10ppm over -40 to +85°C Voltages; 2.5 & 3.3V Outputs; CMOS, LVPECL & LVDS Typical applications:

Base stations, Ethernet, Femtocells, SoNET/SDH, storage (SAN), video broadcasting, WiMAX/WLAN0.5ps integrated

RMS phase jitter

21

High Shock SMD SPXO HGXO High shock up to 100,000G; vibration

20g at 10-2000Hz swept sine perMIL-STD-202G

460kHz to 50MHz Voltages 3.3 & 5V Frequency stability ±40ppm over

-55 to 125°C HGXO typical applications:

Military applications such as smart munitions & projectile electronics

Demanding industrial applicationsHigh shock up to

100,000G

22

Frequencies to 1500MHz

VCXOs Voltage Controlled Crystal Oscillators SMD & thru hole packages 1 to 1500MHz Frequency Stabilities from ±10ppm

(Depending on temperature range) Operating Temperature Range from

-40 to 85°C Pullability from ±50ppm min Voltages: 1.8, 2.5, 2.8, 3.3 & 5V Outputs: HCMOS, TTL, LVPECL, LVDS &

Sinewave

23

Pullability ±100ppm min

Standard VCXO: IQXV-50/51/52 Industry standard 7 x 5mm package Pullability ±100ppm min 2.5, 3.3, 5V HCMOS Ageing max ±3ppm in first year 1 to 60MHz Frequency Stability ±20ppm -40 to 85°C Typical applications:

Communications: Ethernet, SDH/Sonet, satellite communications, video networking

T&M: Frequency synthesisers, network analysers

24

Pullability ±50ppm minimum

Standard VCXO: IQXV-60/61/63 Industry standard 5 x 3.2 mm package Pullability ±50ppm min 2.5, 3.3, 5V HCMOS Ageing max ±3ppm in first year 1 to 77.76MHz Frequency stability ±20ppm -40 to 85°C Typical applications:

Communications: Ethernet, SDH/Sonet, Satellite communications, video networking, fibre channel

Test & Measurement: Frequency synthesisers, network analysers

Standard VCXO: IQXV-41/42/43

25

Industry standard 3.2 x 2.5 mm package Current consumption down to 5mA (1.8V) Pullability ±50ppm min 1.8, 2.5, 3.3V HCMOS Ageing max ±3ppm first year 1.25 to 54MHz -40 to 85°C Typical applications:

Communications: Ethernet, SDH/Sonet, satellite communications, video networking

Test & Measurement: Frequency synthesisers, network analysers

Industry standard 3.2 x 2.5 mm package

LVPECL/LVDS VCXO: IQXV-80/81

26

Industry standard 3.2 x 2.5mm package 40 to 170MHz Pullability ±80ppm min 3.3V LVPECL (IQVX-80), LVDS (IQXV-81) Frequency Stability ±25ppm -40 to 85°C Ageing max ±2ppm first year Typical applications:

Ethernet, SDH/Sonet, Digital imaging, WiMax, WLAN, PLLs Frequencies up to

170MHz

Low Jitter VCXO: IQXV-89

27

Industry standard 7 x 5mm package 0.05 to 0.3ps RMS phase jitter Phase noise -148dBc/Hz @100kHz 1 to 800MHz Pullability ±50ppm min APR 2.5 & 3.3V HCMOS, LVPECL, LVDS Frequency Stability ±10ppm -40 to 85°C Typical applications:

DSL, Ethernet, Femto & pico cells, Remote radio heads, SONET/SDH, Video broadcasting

0.05 to 0.3ps RMS phase jitter

28

Frequency Stabilities from ±0.05ppm

TCXOs & VCTCXOs Temperature Compensated Crystal

Oscillators SMD & thru hole packages 1 to 800MHz Frequency Stabilities from ±0.05ppm Operating Temperature Range

from -40 to 85°C Pullability from ±5ppm (VCTCXOs) Voltages: 1.8, 2.5, 2.8, 3.0, 3.3, 5 & 12V Outputs: HCMOS, Sine, Clipped

Sinewave

29

Tight stability ± 0.5ppm over -40 to 85°C

Standard VCTCXO: CFPT-126 7 x 5mm 3.3V HCMOS VCTCXO Tight stability ± 0.5ppm -40 to 85°C ±5ppm pulling Typical current consumption 3mA 10 to 40MHz Typical applications:

Communications: Base stations, repeater stations, digital switching, SDH/Sonet

Test & Measurement

30

3.2 x 2.5mm HCMOS VCTCXO

Standard VCTCXO: IQXT-191 3.2 x 2.5mm HCMOS VCTCXO Voltages 2.5, 2.8, 3, 3.3V Frequency stability ±2.5ppm -30 to 85°C Typical current consumption 6mA 8.192 to 40MHz Typical applications:

Communications: Zigbee, Bluetooth, RF modules, RFID, Wi-Fi & WiMAX

Industrial: POS systems

31

±0.14ppm frequency stability

Tight Stability TCXO: IQXT-210 ±0.14ppm frequency stability 10 to 50MHz in 5.0 x 3.2mm package Industrial operating temperature range

-40 to 85°C 3.3V with typical current draw 10mA Voltage control option available Outputs: HCMOS & Clipped Sinewave Typical applications:

Femto & micro basestations, GPS/GNSS, IP networking, point to point comms, RF & WiFI modules, Sonet/SDH, SynchE, Test & measurement

Low power TCXO/VCTCXO: IQXT-260

32

2.5 x 2.0 x 0.8mm SMD package 2mA current consumption & 0.01µA

standby current when in power down mode

±0.5ppm frequency stability over -40 to +85°C

10 to 52MHz 1.8 to 3V Voltage control & enable/disable

options available Output: Clipped Sinewave Typical applications:

GPS, PNDs, Ethernet, Wi-Fi, Wi-Max, WLAN

0.01µA standby current

33

MCXO: IQMT-100 Microcomputer Compensated Crystal

Oscillator OCXO performance in a standard

clock oscillator 7 x 5mm package ±50ppb frequency stability –40 to 85°C Excellent typical short term stability of

2E-10/s Typical applications:

Femto, pico & micro base stations, digital switching, GPS/GNSS, microwave backhaul, digital video broadcast, satellite up converters, SynchE, environmental monitoring

OCXO performance in a standard clock oscillator package

OCXOs

34

Oven Controlled Crystal Oscillators SMD & thru hole packages 4.0 to130MHz Frequency Stabilities from ±0.2ppb Operating Temperature Range

from -40 to 85°C Voltages 3.3, 5.0, 12 & 15V Outputs HCMOS, ACMOS, Sinewave,

Clipped Sinewave Phase Noise -180dBc @100kHz Low Ageing < ±50ppb per year

Frequency Stabilities from ±0.2ppb

35

Stabilities down to ±3ppb

Low ageing OCXO: IQOV-70 36 x 27mm thru hole Stabilities from ±3ppb Operating temperature range

from -40 to 75°C Ageing in first year ±50ppb max Phase noise -150dBc/Hz @ 100kHz 4 to 80MHz; available with Voltage Control Typical applications:

Base stations, digital switching, remote radio heads, satellite comms, Test & Measurement equipment

36

Low ageing OCXO: IQOV-90 25.4 x 22mm SMD Stability from ±3ppb

Operating temperature rangefrom -40 to 75°C

Ageing in first year max ±50ppb Phase noise -150dBc/Hz @ 100kHz 10 to 40MHz; available with Voltage Control Typical applications:

Base stations, digital switching, remote radio heads, satellite comms, Test & Measurement equipment

Ageing in first year max ±50ppb

37

Only 6.5mm high in 14 x 9mm package

Ultra Miniature OCXO: IQOV-162 10ppb stability over -40 to 85°C Only 6.5mm high in 14 x 9mm package 10 to 100MHz Ageing <±500ppb per year Typical applications:

CDMA base stations, Femtocells, optical networking, SynchE

3G & 4G LTE, Ethernet, SoNET/SDH, ATM backplanes, SATA

Satellite communications

38

Sub-Miniature OCXO: IQOV-71 9.7 x 7.5mm plastic package Developed frequencies:

10MHz, 12.8MHz, 19.2MHz, 20MHz, 24.576MHz, 25MHz, 30.72MHz, 38.88MHz, 40MHz, 49.152MHz, 50MHz

Tight stability: ±10ppb -20 to +70⁰C or ±20ppb -40 to +85⁰C

Low power consumption ≤1 Watt Fast Warm up < 3 minutes Typical applications:

Base stations, Small Cells, Instrumentation, Time and Frequency Reference, Broadcasting, Satellite Communications

The smallest OCXO in the world

Ultra Tight Stability OCXO: IQOV-164

39

36 x 27mm ‘Europack’ Stability from ±0.2ppb, max operating

temperature range -40 to 85°C Ageing in first year max ±100ppb Phase noise -155dBc/Hz @ 100kHz 5 to 100MHz; available with Voltage Control Outputs: HCMOS, Sinewave Voltage: 3.3v Typical applications:

Base stations, GPS, Radar, Point to point comms, Sonet/SDH, PCI express, Wi-Max, Broadcast reference standards

Ultra tight stability of ±0.2ppb

40

Phase noise only-180dBc/Hz @ 100kHz

Ultra Low Phase Noise OCXO IQOV-200F Phase noise -180dBc/Hz @ 100kHz High frequency range from 80 to 130MHz Tight temperature stability to ±50ppb 12v supply with Sinewave output 36 x 27 x 16mm ‘Eurostyle’ package Typical applications:

Test & Measurement Systems Radar

41

Advanced Modules SMD & thru hole packages 1PPS Output (pulse per second) 10MHz back up oscillator Operating temperature range

from -40 to 85°C Voltage 5V Outputs: HCMOS, Sinewave

1PPS Output (pulse per second)

42

Frequency accuracy to within ±1E-12

GPS Advanced OCXO Clock Module IQCM-100 Holdover 1.5μs/24 hours when locked

to a 1PPS input from external GPS receiver, easily meeting industry standard requirements

Adaptive algorithm ‘learns’ from stable GPS signal over 2 days & can be adjusted to allow for errors

Frequency accuracy to within ±1E-12 when locked to a 1PPS GPS signal

Typical applications: LTE & 4G base stations

43

Clock Module Evaluation Board Allows testing and evaluation of IQD’s

IQCM-100 & IQCM-110 clock modules Available with or without on board GPS Functions:

Monitor output data word from the clock module via standard serial interface on a PC

Read clock module status via UART interface Monitor 1PPS and 10MHz output from the

clock module via BNC connections Monitor GPS 1PPS signal with respect to the

clock module 1PPS via BNC connections Switch between lock to GPS 1PPS, lock to

external 1PPS or No GPD lock

Testing & evaluation of IQCM-100 & IQCM-110

44

Clock Module Evaluation Board Functions (continued):

Optional on board GPS unit with GPS NMEA data accessible via USB

LED indication of GPS lock status LED indication of 1PPS clock module output Test point connections to allow for easy

monitoring of signals and status lines Removable clock module for testing of

multiple units

Kit Contents (excludes clock module) 1x Clock module evaluation PCB 1x Serial Cable 1x Power supply unit (5.0VDC @ 4A) 1x GPS antenna (optional)

Clock module must be ordered separately

45

1,000 times more accurate than typical OCXO

Rubidium Oscillator: IQRB-1 Accuracy of ±5E10-11 (±0.05ppb)

irrespective of temperature fluctuations Free run frequency source in applications

such as LTE (Long Term Evolution) systems 50.8 x 50.8mm Leaded package Short Term Stability 100s 0.008ppb Phase Noise -140dBc @1kHz Typical applications:

LTE systems that require exceptional timing accuracy

UTMS as well as extended holdover for CDMA and WiMax

46

Consistent on-time delivery >99%

In Summary Comprehensive product range Large stock for next day delivery Consistent on-time delivery >99% Engineering support from design to

production with dedicated applications support team

Multilingual sales team Custom product design to match your

requirements

Standing out from the crowd

47