Project: Construction of Rabigh 2 x 660 MW IPP Project Owner: Consultant: Contractor: Sub-contractor: Doc No. RAB-X-WET-GD-FD-006-3 Rev: 3 Total Pages 25 (excluding cover page) Title: RABIGH IPP, DESALINATION PLANT INSTRUMENT HOOK-UP DRAWING AS - BUILT Prepared by YOUSSEF SMAILI 3 Youssef Smaili W. Fatehy Z. Ghazzaoui June 20, 2012 “AS-BUILT” 2 Youssef Smaili M. Barakat Z. Ghazzaoui August 23, 2011 1 Youssef Smaili M. Barakat Z. Ghazzaoui June 20, 2011 0 Youssef Smaili M. Barakat Z. Ghazzaoui March 07, 2011 Rev Compiled by Reviewed by Approved by Date Status Reviewed by SEPCOIII Name Signature
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Project:
Construction of Rabigh 2 x 660 MW IPP Project
Owner:
Consultant: C o n t r a c t o r : Sub-contractor:
Doc No. RAB-X-WET-GD-FD-006-3
Rev: 3 Total Pages 25 (excluding cover page)
Title:
RABIGH IPP, DESALINATION PLANT
INSTRUMENT HOOK-UP DRAWING
AS - BUILT
Prepared by
YOUSSEF SMAILI
3 Youssef Smaili W. Fatehy Z. Ghazzaoui June 20, 2012 “AS-BUILT”
2 Youssef Smaili M. Barakat Z. Ghazzaoui August 23, 2011
1 Youssef Smaili M. Barakat Z. Ghazzaoui June 20, 2011
0 Youssef Smaili M. Barakat Z. Ghazzaoui March 07, 2011
Rev Compiled by Reviewed by Approved by Date Status
Standard product specification: metal/metal seated, PtFe packed, stainless steel, t bar operation, globe pattern, 6000 psig (414 barg).
Standard range part numbers
*Insert material codeNotes for compression ended valves:-1. For CPI™ change A to Z.2. “A” dimension given for finger tight nuts and ferrules.3. Can be offered to comply with latest issue of NACe subject to
para. 8.4.1.1.4. For compression ended valve pressure ratings consult tube
designed to meet pressure/temperature ratings of ANsI Class 2500 where applicable.For a full list of options and suffix’s, see page 20. For a full list of materials and specifications, see page 21.
Globe style bar stock needle valves HNV series (6,000 psig/414 barg)Purposebar stock needle valves are purpose designed valves for operation with any fluid up to 6,000 psig (414 barg) rating. Complete with standard PtFe gland packing and self centering non rotational tip, gives the user assurance of total in service sealing security. For gaseous application soft tipped optional seating is available. A wide variety of end connectors are offered for all types of installation. NACe compliant materials and oxygen clean are also available along with an extensive list of materials of construction.
Specification• standard seat diameter 4mm • Optional seat diameter 6mm• Cv: 0.35 standard• maximum standard pressure up to 6,000
psig (414 barg)• temperature rating -54C to +538C
(-65F to +1000F)• Port sizes up to 1/2” pipe thread and
1/2”/12mm tube compression ends as standard
Optional sizes up to 1” pipe, tube and combination ends can be considered
Features• rolled spindle operating threads • stainless steel construction as standard • PtFe packing standard, optional graphite • Alternative tip and materials of construction
available • self centering non rotating spindle tip for
bubble tight shut off • Colour coded functional identification• back stop spindle for blowout prevention,
and minimal atmospheric leakage • Low torque operating t bar handle • externally adjustable gland • Panel and base mount option • Variety of end connections including integral compression one piece bodies• Angled versions available • Firesafe option available to API 607 bs
6755 Part 2 • dust cap to prevent ingress of
contamination to operating thread• bonnet locking pin fitted as standard• Angled flow path (option)
WARNING
When selecting products for specific applications users should refer to our notice at the bottom of page 3.
Pressure vs temperature
6,000(414)
4,000(275)
2,000(138)
0
Pressurepsig (barg) B - B 6000 psig (414 barg)
standard PTFE packingB - C 6000 psig (414 barg)
standard Graphite packingB - D PEEK tipC - E PCTFE tip
WARNINGFAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by usershaving technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Dueto the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection ofthe products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and itssubsidiaries at any time without notice.
Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governedby the provisions stated in the “Offer of Sale”.
The Parker A-LOK® twin ferrule fitting consists of four precision engineered parts designed to provide secure leak-proof jointscapable of satisfying high pressure, vacuum and vibration applications.
Inch
Parker Instrumentation Tube Fittings are supplied complete and ready to use. The front ferrule swages onto the tube as it movesdown the body seat creating a pressure/vacuum-tight seal on both tube and body by the interface pressure and surface finish ofmating components. The Parker Suparcase back ferrule then moves inwards in the cone of the front ferrule, forming into the tubeand creating a strong mechanical hold on the tube.
Pressure sealby front ferrule on
tube and body
Parker’s high quality, silverplated nut ensures no galling
of body threads
The Parker Suparcase® back ferrule provides a strong mechanical
and anti-vibration hold on the tube
Deep tube abutment andclose tolerance of nut and body
for accurate tube alignment
Metric
Pressure sealby front ferrule on
tube and body
Parker’s high quality, silverplated nut ensures no galling
of body threads
The Parker Suparcase® back ferrule provides a strong mechanical
and anti-vibration hold on the tube
Deep tube abutment andclose tolerance of nut and body
for accurate tube alignment
Metric identificationshoulder
Parker Hannifin Corporation
4
A-LOK® Tube Fittings
Visual IndexTube to Male Pipe
MSCNMSCKMSCRMale Connnectorpage 8, 9, 10, 11, 12
MBCNMale Bulkhead Connectorpage 13
MTCNThermocouple Connectorpage 14
MSELNMSELKMale Elbowpage 14, 15, 16
MVELNNPT Male 45° Elbowpage 17
MRTNNPT Male Run Teepage 18
MBTNNPT Male Branch Teepage 19
Tube to Female Pipe
FSCNFSCKFemale Connnectorpage 20, 21
FBCNFemale Bulkhead Connectorpage 22
GCRGauge Connectorpage 22, 23
FELNFemale Elbowpage 23
FRTNFemale Run Teepage 24
FBTNFemale Branch Teepage 25
Tube to Tube UnionsSCSCMUnionpage 26
CUConversion Unionpage 26
RURUMReducing Unionpage 27
BCBCMBulkhead Unionpage 28
DELTADielectric Union Adapter,Dielectric Assemblypage 29
EEEEMELZUnion Elbowpage 29, 30
ETETMUnion Teepage 31
JLZDrop Size Teepage 32
ECRECRMUnion Crosspage 33
Port Connectors
TURTUCMTURMTube End Reducerpage 34, 35, 36
TUBCTube End Bulkhead Adapterpage 36
PCPCMPort Connectorpage 37
MANMARMAKTube End Male Adapterpage 38, 39, 40, 41
TUHATube End to SAE Straight Thread Adapterpage 42
FANFAKFARTube End Female Adapterpage 42, 43, 44
P2T3Push-Lok to Tube Adapterpage 44
P2HFPush-Lok to Male Adapterpage 45
P2LZ6Push-Lok to A-LOK®
page 45
ZP2Push-Lok to Port Connectorpage 45
LJFLapped Joint Tube Adaptorspage 46
ZH2XDP Transmitter Calibration Adapterspage 46
37° Flare (AN) to A-LOK®
X6TU37° Flare (AN) to A-LOK®
page 47
XASC37° Flare Connector to A-LOK®
page 47
XABC37° Flare Bulkhead Connectorto A-LOK®
page 47
BS
PP
Parker Hannifin Corporation
5
A-LOK® Tube Fittings
Tube to “O” Ring Seal
M1SCMale Connector SAEStraight Threadpage 49
M5SEL
Male SAE Straight Thread Elbowpage 50
MSEL (R)
Male BSPP Straight Thread Elbowpage 50
M5RTMale Run Tee SAE Straight Threadpage 51
MRT (R)
Male BSPP Run Tee Straight Thread page 51
M5BTMale Branch Tee SAE Straight Threadpage 52
MBT (R)Male BSPPBranch Tee Straight Thread page 52
ZH3LALong Male ConnectorSAE Straight Threadpage 53
M5VEL45° Positionable Male Elbowpage 53
M2SCMale Connector to “O” RingStraight Threadpage 54
M3SCMale Connector to “O” RingPipe Threadpage 54
M2TUTube End to “O” Ring Straight Threadpage 55
M3TUTube End to “O” Ring Pipe Threadpage 55
FHOAPipe Thread to SAE Straight Thread Adapterpage 56
AH2LZBulkhead to Conversion Adapterpage 56
Tube to WeldedSystems
ZELWSocket Weld Elbowpage 58
ZELW2Buttweld Elbowpage 58
ZHLWSocket Weld Connectorpage 59
ZHLW2Buttweld Connectorpage 59, 60
Analytical Fittings
Z2HLZ7Column End Fittingpage 62
Z3HLZ7Column End Fittingpage 62
ZHLZ7Column End Fitting (without Frit)page 63
Z2HLZColumn End Fittingpage 63
ZHLZColumn End Fitting (without Frit)page 64
Z7HLZ7Union Connectorpage 64
FLZ7Male Connectorpage 65
ZHLSSanitary Flange Fittingpage 65
Barbed Fittings
B2HFBarbed Connector to Male Pipepage 66
B2TUBarbed Connector to Tube Adapterpage 66
HCSHose Connector Sleevepage 66
ComponentsTIZ Insertpage 67
NU, NUM Tube Nutpage 67, 68
BZI Inverted Tube Nutpage 68
BZP Knurled Nutpage 68
FF, FFM Front Ferrulespage 69
BF, BFM Back Ferrulespage 69
Ferrule Holderpage 69BLP, BLPM Plugpage 70
BLEN, BLENM Cappage 70, 71
MDFVent Protectorpage 71
Sealing Washerspage 72
WLZ, WLNBulkhead Locknutpage 73
BN Bulkhead Locknutpage 73
L5N Accessory Locknutpage 73
Engineering Reportpage 74
Instrument Tubing SelectionGuidepages 75-78
Thread and Tube End SizeCharts (U.S.A/International)pages 79-81
Visual Index
BSPP
BS
PP
BSPP
INCHES
†DA-LOK® TUBE
SIZE TUBE STRAIGHT H E INS.NO. O.D. THREAD †C HEX DIA. DEPTH
6MO UNS S31254 UNS S31254 ASTM-A-269ASTM A479 ASTM A 479
Parker Hannifin Corporation
6
A-LOK® Tube Fittings
Table 1 – Typical Raw Material Specifications
(1) If more specific information, including heat code traceability, is required, your Parker Hannifin A-LOK® distributor will provide details.(2) Stainless steel A-LOK® tube fittings work reliably on both seamless and welded-redrawn, fully annealed type 304, 316 and 316L tubing.
NOTE: Dimensions C and D are shown in the finger-tight position.† Average ValueDimensions for reference only, subject to change.
NOTE: Dimensions C and D are shown in the finger- tight position.† Average ValueDimensions for reference only, subject to change.
INCHES
MILLIMETERS
Tube End Dimensional Data
H HEX A-LOK®
STRAIGHTTHREAD
E
C
D
H HEX A-LOK®
STRAIGHTTHREAD
E
C
D
Parker Hannifin Corporation
7
A-LOK® Tube Fittings
Parker A-LOK® Tube Fittings are ordered by part number as listed in this catalog.Size: Tube and pipe thread sizes are designed by the number of sixteenths of an inch (1/2" tube = 8/16" = 8). (1/4" pipe thread = 4/16" = 4).Straights & Elbows: Call out largest A-LOK® tube end size first followed by the smaller A-LOK® tube end orpipe thread size.Tees & Crosses: For drop size tees – first size the run (1 to 2) and then branch (3). Example – the size des-ignator for a male run tee for 3/8" O.D. tube and 1/4" male pipe thread would be 6-4-6. For crosses – first sizethe run (1 to 2) and then the branch (3 to 4). For tees with all ends the same, use the tube and size beforeand after the style designator; i.e. 4ET4.Type: A letter or combination of letters and numbers are used to designate the type of fitting. (i.e. MBT = malebranch tee, FA = female adapter, etc.) See the visual index for fitting types.Material: Basic material type (B = brass, 316 = stainless steel, type 316; S = steel; A = aluminum; M = Monel; HC = Hastelloy C-276®;IN = Alloy 600; SS20 = Carpenter 20®; 6MO = 6Mo; 625 = 625; 825 = 825; T = Titanium). Parker A-LOK® Tube fittings, for specialapplications, can be furnished in almost any material suitable for machining.Special Fittings: If there is any question as to the fitting desired, particularly for special fitting configurations, it is suggestedthat a customer print be submitted with the fitting request for quote.Availability: Items priced in current price list 4233 are carried in stock. Price and delivery for non-stocked items quoted on requestthrough the Quick Response Department.
Parker A-LOK® tube fittings part numbers are constructed from symbols that identify the size and style of the fitting and material used.Example: The part number shown below is for a Parker A-LOK® stainless steel male connector for 1/2" O.D. tube (–8) and 1/4" male pipe thread (–4).
How To Order Inch Parts
Nomenclature
MaterialStainless Steel
Thread TypeNPT
Fitting TypeMale Connector
MSC
1st End1/2" Tube O.D.
8 4 N 316
2nd End1/4" Pipe Thread
1
2
3
4
Parker A-LOK® tube fittings are ordered by part number as listed in this catalog.
Size: Metric tube is designated in millimeters and prefixed “M” (i.e. 12mm tube = M12.) The pipethread size is written as a fraction (i.e. 1/4 NPT = 1/4N).
Straights & Elbows: Call out largest A-LOK® tube end size first followed by the smaller A-LOK® tube endor pipe thread size.
Tees & Crosses: For drop size tees – first size the run (1 to 2) and then branch (3). Example – the sizedesignator for a male run tee for 6mm tube and 1/4" male pipe thread would be 6-4-6. For crosses – firstsize the run (1 to 2) and then the branch (3 to 4). For tees with all ends the same size, use the tube endsize after the style designator; i.e, ETM4
Type: A letter or combination of letters and numbers are used to designate the type of fitting. See the visual index for fitting types.
Material: Basic material type (B = brass, 316 = stainless steel, type 316; S = steel; A = aluminum; M = Monel; HC = Hastelloy C-276®;IN = Alloy 600; SS20 = Carpenter 20®; 6MO = 6Mo; 625 = 625; 825 = 825; T = Titanium). Parker A-LOK® Tube fittings, for specialapplications, can be furnished in almost any material suitable for machining.
Thread types:
N = NPT ANSI B1.20.1K = BSP Taper BS21, ISO7/1R = BSPP BS2779, ISO 228/1+2, DIN 3852 FORM ABR = BSPP BS2779, ISO 228/1+2, DIN 3852 FORM BM = Metric BS2779, ISO 228/1+2, DIN 3852RED = BSPP BS2779, ISO 228/1+2, DIN 3852
with elastic sealing
Please see visual index.
Availability: Items priced in current price list 4233 are carried in stock. Price and delivery for non-stocked items quoted on requestthrough the Parker ICD Quick Response Department.NOTE: Hastelloy C-276 is a registered trademark of Cabot Corporation. Carpenter 20 is a registered trademark of Carpenter Technology Corporation.
How To Order Metric Parts
MaterialStainless Steel
Thread Type*NPT
StyleFemale Connector
FSC -
-
Tube O.D.12mm
M12 1/4 N 316
Thread Size1/4"
1
2
3
4
Color CodingFor easy reference, table headsare color indicated as follows:
fractional
metric
INTER-INCHES
PARKER CHANGES TUBE NPT PIPE WPART NO. WITH O.D. THREAD A C D R HEX