Production Manual for INFINITY v1.7 HP 1810-8G Switch [J9802A] VLANs Setup
Production Manual for INFINITY v1.7HP 1810-8G Switch [J9802A] VLANs Setup
v1.7.1
2
ContentsHP 1810-8G Switch [J9802A] VLANs Setup....................................................................................................................... - 1 -
HP 1810-8G Switch [J9802A] VLANs Setup............................................................................................................................................ - 4 -
HP 1810-8G Switch [J9802A] Settings backup....................................................................................................................................... - 9 -
HP 1810-8G Switch [J9802A] Settings restore..................................................................................................................................... - 11 -
3
Warnings, Cautions and Notes
HP 1810-8G Switch [J9802A] switch Setup
1. The network switch has by default the IP 192.168.2.10/24. Setup a pc with the IP 192.168.2.5 and attach a network cable to the first port of the switch. Open the browser and type http://192.168.2.10 to login. The below screenshot must be appeared. Click “Login” to login without password.
Screenshot 1
2. Click “VLANs” and “VLAN Configuration” and follow the steps shown in the below screenshots. With these steps the needed VLAN IDs are created in the memory of the switch.
4
Warning! This symbol means you must follow the instruction carefully in order to proceed with the next step
Caution! Cautions are included to help you avoid damaging hardware or losing data.
Note! Notes provide optional information.
Screenshot 2 Repeat steps 3,4 and 5 using VLAN ID 10 and 12.
3. For the created VLAN IDs we add a VLAN name for our convenience.
Screenshot 3
4. Click “VLANs” and “Participation/Tagging” to setup the ports for each VLAN ID.
5
Screenshot 4
Screenshot 5
Screenshot 6
6
Screenshot 7
Screenshot 8
Screenshot 9
7
Screenshot 10
5. Setup the management IP.
Screenshot 11
8
Screenshot 12
6. Enable SNTP functionality.
Screenshot 13
7. Enable Logging functionality.
9
Screenshot 14
Screenshot 15
You have successfully completed the switch setup.
HP 1810-8G Switch [J9802A] Settings backup
1. If the switch has the factory default settings setup your pc network with IP 192.168.2.5 and subnet mask 255.255.0.0. If the switch is already setup use the IP 10.123.179.10 and subnet mask 255.255.0.0
2. Open the browser and type the appropriate IP. For this guide the switch has factory default network settings.
10
You must add the below firewall rule to Infinity!
Screenshot 16
3. Follow the below steps to select the way that the setup file will be transferred to you pc.
Screenshot 17
11
4. Save the configuration file locally.
Screenshot 18
Screenshot 19
You have successfully completed the configuration backup.
HP 1810-8G Switch [J9802A] Settings restore
1. If the switch has the factory default settings setup your pc network with IP 192.168.2.5 and subnet mask 255.255.0.0. If the switch is already setup use the IP 10.123.179.10 and subnet mask 255.255.0.0
12
2. Open the browser and type the appropriate IP. For this guide the switch has factory default network settings.
Screenshot 20
3. Follow the below steps to restore the settings’ file.
Screenshot 21
13
Screenshot 22
Screenshot 23You have successfully completed the configuration restore.
14