Presentation
INDUSTRIAL TRAINING PRESENTATIONMUHAMMAD FARHAN BIN ROSLAN50213113531UNIVERSITI KUALA LUMPUR(INTERNATIONAL COLLEGE)
DYNAC ENGINEERING SDN. BHD.UNIVERSITI KUALA LUMPURINTERNATIONAL COLLEGEINTRODUCTIONDYNAC ENGINEERING SDN. BHD.COMPANY BACKGROUND:30 years experience in HVAC systems industry.Dynac wide range products and services goes from oil and gas, chemical refinery, rig building industry to telecommunication.Main headquarter is at Tanjung LangsatPrimary Activities:- HVAC systems (Heating, Venting, Air Conditioning)ACHE (Air Cooled Heat Exchangers)Cable Support SystemLV Switchgear and Telekom JKH.
DYNAC ORGANISATION CHART
PHILOSOPHYWith the dedication and wills of the staffs nothing is too sophisticated or small for DYNAC. We have proven in the past that we shall stand as the rest of the well established companies.The wealth of experiences and resources are a tremendous asset to keep ourselves continue growing. In addition, hopefully our efforts contribute to the industries could assist our country in early achievement of Vision 2020.
AIR COOLED HEAT EXCHANGER (ACHE)Air cooled heat exchanger is the equipment used to reduce the temperature of process medium by transferring the heat to the surrounding air.Type of ACHEForced DraughtInduced DraughtNatural DraughtForced Draught With Air Recirculation
ACHE Mainly Used:Offshore (Upstream)Refineries (Downstream)Petrochemical ComplexesPower Generation plants.
HOW ITS WORK?An air-fin exchanger is, in principle, exactly the same as the radiator of a car engine.The fluid to be cooled passes through the tubes while air is blown (forced draught), or pulled (induced draught), over the tubes by a fan or fans causing cooling of the fluid.The tubes may be plain or finned depending upon process requirements. Cooling control can be either by variable pitch fan blades or by variable speed or on/off motor, all of which will vary the amount of air flow across the tubes.
Tube bundlePlenumHeader boxFan ringSupport structureACTIVITIESProject/Job Task:3D design using Autodesk AutoCAD for Bergading Complex Project. (Hess Exploration And Production Malaysia)
Summary Of ActivitiesAble to implement things that had be learned in classAble to understand Air Cooled Heat Exchanger Design and work principleAble to read 2D drawing of ACHEThis project is related to some mechanical subject:-i- Design Engineering 2ii- Engineering Mechanics Staticsiii- Engineering Mechanics Solidiv- Heat Transfer
Project/Job Task:-Make a analysis and calculation for lifting lug for Petronas Kumang Cluster (SK-500) project Air cooled heat exchanger. ACTIVITIES
Able to implement what had been study in classAble to understand the standards used for the calculation and design in ACHE such as:-i) ASME (American Society Of Mechanical Engineers) standardsii) API (American Petroleum Institute) standardsiii) AISC (American Institute for steel structure) standardiv) PTS (Petronas Technical Standard)This task is related to some mechanical subject such as:-i) Engineering Mechanics Staticsii) Engineering Mechanics - Solidiii) Engineering Design 2
Summary Of Activities
APPENDIX
Header BoxSupport Structure, Fan RingAnd Plenum
Lifting Lug
Hydro Test running in top side of AFC (Air Fin Cooler)
Air Fin Cooler Fully Assemble
Shell And Tube heat exchangers
THANK YOU
