Index Sebf8029

Reuse And Salvage Guidelines Index of Publications on Reusability or Salvage of Used Parts

Index of Publications on Reusability or Salvage of Used Parts SMCS - 1000; 7000

Shutdown SIS

Previous Screen

Product: NO EQUIPMENT SELECTED Model: NO EQUIPMENT SELECTED Configuration: NO EQUIPMENT SELECTED

Media Number -SEBF8029-29 Publication Date -24/08/2004 Date Updated -24/08/2004

SEBF80290001

GUIDELINE FOR REUSABLE PARTS AND SALVAGE OPERATIONS

CATERPILLAR SEBF8029-29August 2004SMCS Codes: 1000, 7000

Index of Publications on Reusability or Salvage of Used Parts

This bulletin gives an index of the GUIDELINES FOR REUSABLE PARTS and other service literature which have information on the reusability and/or repair of used parts and the tools needed to make the repairs. Put this Bulletin in the front of the binder for Guideline For Reusable Parts. A good binder to use for this purpose is the blue 3-ring binder, SEBD0982, "Service Information".

A complete library of the GUIDELINES FOR REUSABLE PARTS is available by ordering SEBF8000. To complement the library, all new and revised Guidelines are available through an automatic mailing by subscription. The subscription, SEBF8052, is renewable on a annual basis. Order both on a Literature Order Form.

Note: Extra copies of Service Magazine Articles go into inventory. When stock is exhausted, go to SISWEB.

The form numbers and titles of the current Guidelines for Reusable Parts, Contamination Control and CHS that have been printed as of July 13, 2004 are:

REHS1757 Rebuild Guidelines for the Suspended Undercarriage

REHS1790 Instructions for Inspection and Repair of the Frame for the Caterpillar Quick Couplers

1REHS2099 R&S Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks

1REHS2110-01 Center Steering Arm Straight Bore Inspection and Salvage Procedure for 785, 785B, and 785C Off-Highway Trucks

1REHS2111 Center Steering Arm Straight Bore Inspection and Salvage Procedure for 789, 789B, and 789C Off-Highway Trucks

1REHS2112 Center Steering Arm Straight Bore Inspection and Salvage Procedure for 793, 793B, and 793C Off-Highway Trucks

1REHS2113 Center Steering Arm Straight Bore Inspection and Salvage Procedure for 797 and 797B Off-Highway Trucks

SEBF8001-01 (Canceled - Refer to SEBF8049 and SEBF8068)

SEBF8002-05 Valves, Valve Springs, Valve Rotators, and Locks

SEBF8003 (Canceled-Information now in SEBF8005)

SEBF8004-02 1T-0237 Output Flange for Torque Converters on D6, D7, D8, D9 Tractors

SEBF8005-05 Repair of Pump Drive Gears for Torque Converters

SEBF8006-05 Clutch Housings and Clutch Pistons for Transmissions and Torque Dividers (with Cast Iron Seal Rings)

SEBF8007-02 1T-0595 Carrier for Torque Converters on D8 and D9 Tractors

SEBF8008-03 Turbine Wheels for Torque Converters Used with Power Shift Transmissions

SEBF8009-01 Main and Connecting Rod Bearings

SEBF8010-01 (Replaced by SEBF8060)

SEBF8011-03 1T-0787 and 1T-0657 Freewheel Side Plates for Torque Converters

SEBF8012 (Replaced by SEBF8060)

SEBF8013-03 Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material

Pgina 1 de 89Global Basic Search - SEBF8029 - Index of Publications on Reusability or Salvage ...

02/03/2007https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s...

SEBF8014-07 Identification and Applications of Transmission Clutch Plates, and Specifications to Machine Reaction Faces for Power Shift Transmissions

SEBF8015 (Canceled - Information now included in SEBF8049)

SEBF8016-01 1T-0149 Clutch Race Used in 3-Speed Torque Divider Transmission

SEBF8017-03 Clutch Ring Gears for All Power Shift Transmissions

SEBF8018-01 Turbochargers

SEBF8019-07 Specifications for Reusable Turbocharger Components

SEBF8020 (Canceled - Refer to SMHS6915)

SEBF8021-05 Transmission Bevel Pinion and Transfer Gear for D5, D6, D7, D8 and D9 Tractors with Oval Tracks

SEBF8022 (Canceled - Refer to SEBF8558)

SEBF8023-01 (Replaced by SEBF8060)

SEBF8024 (Canceled - Information now included in SEBF8002 and SEBF8034)

SEBF8025 Canceled - Replaced by SEBF8080 and SEBF8081)

SEBF8026 (Superseded by SEBF8136)

SEBF8027-01 (Superseded by SEBF8136)

SEBF8028-02 Transmission Transfer Gear Group Case and Idler Shaft Repair for 621, 623, 627, 641B, 650B, 651B, 651E, 657E, 660B, and 666B Tractor Scrapers

2SEBF8029-29 Index of Publications on Reusability or Salvage of Used Parts

SEBF8030-02 (Canceled - Refer to SEBF8054)

SEBF8031-04 Transmission Clutch Plates and Disc Assemblies with F37 Clutch Friction Material

SEBF8032-01 Piston Pumps and Motors

SEBF8033-04 Specifications for Piston Pump and Motor Components

SEBF8034-10 Valve and Valve Spring Specifications


SEBF8036-01 Transmission Parts Damaged by Cast Iron and Vespel Seal Rings

SEBF8037-05 Brake Drums for Off-Highway Trucks, Tractors, and Scrapers

SEBF8038-01 Reconditioning of Worn 6D-7995 Circle Reverse Housing of 12F and 14E Motor Graders

SEBF8039 Inspection of Crankshafts for Cracks


SEBF8041-10 Crankshaft Measurement

SEBF8042-07 Procedure to Polish Crankshafts

SEBF8043-02 Visual Inspection of Crankshafts (Refer to SM, July 13, 1981)

SEBF8044-04 Repair of Torque Converter Stator Wheels

SEBF8045-03 Engine Gears

2SEBF8046-09 Cast Iron and Steel Engine Pulleys

SEBF8047 (Canceled)

SEBF8048-03 Procedure to Machine Damaged Transmission and Differential Yokes

SEBF8049-07 Pistons

SEBF8050-02 Specifications to Machine Reaction Faces for 3208 Engine Flywheel Assemblies

SEBF8051-03 Piston Pins and Retaining Rings


SEBF8054-07 Procedure to Measure and Straighten Bent Crankshafts


SEBF8056-02 Brake Drums for Track-Type Tractors and Loaders

SEBF8057-03 3208 Engine Fuel Systems

SEBF8058-02 3208 Engine Water Pumps

SEBF8059-12 Procedure to Clean and Inspect Pistons in 3500 Family of Engines



SEBF8060-03 Repair of Transmission, Torque Converter, and Torque Divider Shafts

SEBF8061-02 Engine Precombustion Chambers and 3400 Series Engine Direct Injection Nozzle Adapters

SEBF8062-02 Procedure to Clean and Inspect Air Filters

SEBF8063-01 Visual Inspection of Connecting Rods

2SEBF8064-07 Salvage of Non-Serrated Connecting Rods

SEBF8065 Reserved

2SEBF8066-01 Visual Inspection of 6N-6872 Lifter Guide Springs in 3400 Series Engines

SEBF8067-05 Slipper Followers and Camshaft Roller Followers (Also refer to SM, June 4, 1984)

SEBF8068-01 Cylinder Liners (Also refer to SM, Feb. 27, 1984)

SEBF8069-01 3400 Series Engine Lifter Bores

SEBF8070-02 Bearing Bores in Hydrostatic Transmission Cases

SEBF8071-01 Procedure to Salvage Turbocharger Components

SEBF8072-07 Inspection and Salvage of Hydraulic Cylinder Components

SEBF8073-04 Hydraulic Gear Pumps and Motors

SEBF8074-01 Canceled - merged with SEBF8073

SEBF8075-01 Salvage of Serrated Connecting Rods

SEBF8076-10 Specifications to Salvage Cylinder Block Contact Surfaces

SEBF8077-01 Engine Oil Coolers

SEBF8078 Conventional (Non-Planetary) Final Drive Gears for Track-Type Tractors and Track-Type Loaders

SEBF8079-01 Planetary Final Drives for Track-Type Tractors

SEBF8080-03 Vane-Type Hydraulic Pumps

SEBF8081 Specifications for Reusable Vane Pump Cartridge Components (Superseded by 8080-01)

SEBF8082-03 Procedure to Repair Worn Torque Converter Housing Seal Area on 992C and Later 988B Wheel Loaders

SEBF8083-04 Procedure to Repair Worn Wheel Spindles and Hubs on Off-Highway Trucks

SEBF8084-01 Procedure to Repair Damaged Sprocket Hubs for D8L, D8N, D9L, D9N, D10, D10N, and D11N Tractors

SEBF8085-03 Inspection and Cleaning of Rubber Endsheet Oil Coolers

SEBF8086 Variable Capacity Torque Converter Impeller Salvage for 623B (46P), 633D (25W), 834B (92Z), Tractors and 988B (50W), 992C (42X, 49Z) Loaders

SEBF8087-02 Cast Aluminum Stator Wheels for Torque Converters

SEBF8088-02 992B, 992C Pump Drive Gear Salvage

SEBF8089 Canceled - Never Published

SEBF8090 Wheel Loader Power Train Specifications, 966C, 966D, 980C, 988B, 992B, 992C

SEBF8091-01 Transmission Components

SEBF8092-01 Specifications for Reusable Turbocharger Components on 3600 Family of Engines

SEBF8093-02 Planetary Final Drives (Wheeled Vehicles)

SEBF8094-09 Procedure to Grind Crankshafts

SEBF8095-03 Service Brakes for Off-Highway Trucks and Tractors

SEBF8096 Transmission Governor Salvage for Seven and Eight Speed Powershift Transmissions

2SEBF8097-07 Camshaft Measurement

2SEBF8098-03 Transmission Clutch Plates and Disc Assemblies with RAYFLEX(r) Clutch Friction Material

2SEBF8099-03 Repair of Reaction Dowel Holes in Transmission Clutch Housings

SEBF8100-03 Components for 3600 Family of Engines

SEBF8101-01 Specifications for Cylinder Blocks 3600 Family of Engines

SEBF8102-01 Specifications for Crankshaft Measurement 3600 Family of Engines

SEBF8103-01 Specifications for Grinding Crankshafts 3600 Family of Engines

SEBF8104-03 Specifications for Camshaft Measurement 3600 Family of Engines



SEBF8105-01 Injector and Valve Lifter Group 3600 Family of Engines

SEBF8106-04 Specifications for Cylinder Head Assemblies 3600 Family of Engines

SEBF8107-01 Specifications for Pistons and Rings 3600 Family of Engines

SEBF8108-01 Specifications for Connecting Rods and Bearings 3600 Family of Engines

SEBF8109-02 Specifications for Measurement and Cleaning Cylinder Liners 3600 Family of Engines

SEBF8110-01 Specifications for Water Pumps 3600 Family of Engines


SEBF8112 (Canceled)

SEBF8113-01 Specifications for L-Series Reusable Piston Pump and Motor Components

SEBF8114-01 Identification of Non-Metallic Discs Used in Power Shift Transmissions

SEBF8115 Transmission Clutch Plates and Disc Assemblies with Cellulose (paper) Friction Material

SEBF8116-01 "White Layer Flaking" of Transfer Gears in Off-Highway Tractors and Trucks

SEBF8117-01 Procedure to Repair Worn Blade Circles for 12G, 14G, 16G, 130G, 140G and 160G Motor Graders

SEBF8118-03 Salvage of Center Bearing in Torque Converter Input Housing

SEBF8119-05 Differential Components for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Dump Trucks, Wheel Tractors, Compactors, and Integrated Tool Carriers

SEBF8120 Repair of Worn Wheel Stud Holes on 992C Wheel Loaders

SEBF8121-01 Salvage of Differential Carriers for Wheel Loaders

SEBF8122 Procedure for Repairing Wheel Rims for Off-Highway Tractors and Trucks

SEBF8123-01 Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines

SEBF8126-01 Universal Joints and Drive Shafts

SEBF8127 Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors

SEBF8129-07 Procedures to Salvage Cylinder Head Assemblies - 3600 Family of Engines

SEBF8130-01 Salvage of Folded Core Radiators

SEBF8131-02 Spacer Plates for 3400 Family of Engines

SEBF8132-02 Salvage of Final Drive Sprocket Hubs for 578 and 589 Pipelayers; 963 and 973 Loaders; D4H, D5H, D6H, D7H, D8L, D8N, D9N, D10, D10N, and D11N Tractors

SEBF8133-02 Reusability of Hydraulic Piston Pumps (Vickers)

SEBF8134-03 Individual Clutch Modulation Control Valves

SEBF8135 Repair of Web Cracks in Final Drive Planetary Carriers

SEBF8136-01 Reusability of Hydraulic Piston Pumps and Motors

SEBF8137 Specifications for Hydraulic Piston Pump Components on Swing Circuit of MS300-8 and MS450-8 Hydraulic Excavators

SEBF8138 Specifications for Hydraulic Piston Pump Components on Implement Circuit of MS090-8, MS110-8, MS120-8, MS140-8, MS180-8, MS240-8, MS300-8 and MS450-8 Hydraulic Excavators

SEBF8139 Specifications for Piston Motor Components on Swing Motor Circuit of MS090-8, MS110-8, MS120-8, MS140-8, MS180-8, MS240-8, MS300-8 and MS450-8 Hydraulic Excavators

SEBF8140 Specifications for Piston Motor Components on Travel Circuit of MS090-8, MS110-8, MS110L-8, MS120-8 and MS140-8 Hydraulic Excavators

SEBF8141 Specifications for Piston Motor Components on Travel Circuit of MS180-8 and MS240-8 Hydraulic Excavators

SEBF8142 Specifications for Piston Motor Components on Travel Circuit of MS450-8 Hydraulic Excavators

SEBF8143-04 Front Suspension Cylinder Housings and Heads on 769, 773, 777, 785, 789 and 793 Trucks and 768, 772, and 776 Tractors

SEBF8144 Hydraulic Piston Motors and Pumps (L-Series) Used on 205, 206, 211, 212, 214, 224 Excavators, Challenger 65, D6H, D7H and D8N Tractors


SEBF8146-03 Visual Inspection of Camshafts

SEBF8147 Replacing Tubes in Housings That Are Installed with Mechanical Joints

SEBF8148 General Salvage and Reconditioning Techniques

SEBF8149-12 Specifications for Connecting Rods 3500 Family of Engines

SEBF8150 Procedure to Inspect, Clean and Flush Pistons - 3600 Family of Engines



SEBF8151-03 Procedure to Salvage Cylinder Heads with Damaged Head Stud Threads - 3600 Family of Engines

SEBF8152-01 Procedures to Rebuild Vibration Dampers 3600 Family of Engines

SEBF8153 Universal Joint Assemblies for Motors

SEBF8154-04 Specifications for Camshaft Measurement 3500 Family of Engines

SEBF8155-11 Specifications for Cylinder Head Assemblies - 3500 Family of Engines

SEBF8156-06 Specifications for Crankshaft Measurements - 3500 Family of Engines

SEBF8157-08 Specifications for Cylinder Blocks - 3500 Family of Engines

SEBF8158-01 Steering Clutch and Brake Disks and Plates for Scrapers, Pipelayers, Track-Type Tractors and Loaders

SEBF8159 Front Suspension Cylinder Rods for 789 Trucks (9ZC1 to 9ZC201)

SEBF8160-02 Procedures to Salvage Oil Pan Assemblies 3500 and 3600 Family of Engines

SEBF8161-01 Hydraulic Gear Pumps Used in Transmissions

SEBF8162-10 Specifications to Measure and Salvage Cylinder Head Assemblies and Related Components

SEBF8163 Procedures to Salvage Planet Carrier Thrust Faces

SEBF8164-06 Specifications for Cylinder Liner Measurement and Salvage -3500 Family of Engines

SEBF8165 Hydraulic Piston Motors


SEBF8167-03 Reconditioning Procedures 3114 and 3116 Engines

SEBF8168 Salvage of Final Drive Carrier Plate for 963 and 973 Track-Type Loaders

2SEBF8169-13 3500 Engine and Component Reuse and Salvage Index

SEBF8170-04 Specifications for Engine Oil Pump Measurement and Salvage 3500 Family of Engines

SEBF8171 Recommendations for Cleaning and Inspecting Components 3600 Family of Engines

SEBF8172-01 Visual Inspection of the 7N-4782 Lifter Guide Spring - 3500 Family of Engines

SEBF8173-01 Salvage of Transmission Transfer Gear Case for 980C, 980F, 988B, 992C, and 992D Wheel Loaders; 824C and 834B Wheel Tractors; 825C and 826C Compactors

SEBF8174-05 Rocker Arms, Rocker Shafts, and Bridge Assemblies for 3500 Family of Engines

2SEBF8175-02 Specifications for Damper Inspection 3500 Family of Engines

SEBF8176 Reusable Couplings for Caterpillar XT-3, XT-5, XT-6 Hose

SEBF8177 Piston Crown Pitting and Crater Erosion for 3400 Family of Engines

SEBF8178 Procedure to Salvage Tang Slots on Transmission and Brake Pistons

SEBF8179-01 Hydraulic Piston Pumps Used in E180, E200B, E240, and E240B Excavators

SEBF8180 Hydraulic Piston Pumps Used in E300, EL300, E450, and E650 Excavators

SEBF8181 Salvage Procedure for Transmission Output Carriers for Off-Highway Trucks

SEBF8182-04 Salvage and Reuse of 5T-6343 Final Drive Bearing Used in Off-Highway Trucks, Tractors, and Wheel Loaders

SEBF8183-01 Salvage of Final Drive and Differential Thrust Washer Used in Off-Highway Trucks, Tractors, and Wheel Loaders

SEBF8184 Canceled - Replaced by SEBF8218

SEBF8185 Salvage Procedure for Final Drive Planet Gear Used in Off-Highway Trucks

SEBF8186 Specifications for Trunnion Inspection 3500 Family of Engines

SEBF8187-01 Standardized Parts Marking Procedures

SEBF8188-04 Specifications and Salvage Procedures for Rear Gear Train 3500 Family of Engines (Supersedes SEBF8166)

SEBF8189 Interchangeability of Parts for Various Designs of SP10K Hydraulic Pumps

2SEBF8190-03 Reusability of Wheel Bearings Used in Off-Highway Trucks

SEBF8191-05 Camshaft Roller Followers 3500 Family of Engines

SEBF8192-03 Specifications and Salvage for Cylinder Blocks on 3114 and 3116 Engines

2SEBF8193-03 Reusability of Final Drive Gears Used in Off-Highway Trucks

SEBF8194-05 Specifications for Rear Suspension Cylinder Components Used in Off-Highway Trucks



SEBF8195-03 Salvage Procedure for 8E-2155 Transmission Cover

SEBF8196-02 Inspection, Measurement, and Salvage of Spacer Block for 3176 Engines

SEBF8197 Specifications to Machine Reaction Faces of Flywheel Assemblies on 3176 Engines

SEBF8198-01 Procedure to Install Top Deck Insert in 3406 Remanufactured Engines or Short Blocks

SEBF8199-02 Salvage of 9D-9729 and 8X-1924 Brake Housings Used on Off-Highway Truck

SEBF8200 Salvage of Differential Bearing Cage Used on Off-Highway Trucks

SEBF8201 Specifications for Top Deck Cracks in Cylinder Blocks on 3208 Engines

SEBF8202 Inspection of Rear Engine Mounts on 3500 Family of Engines

SEBF8203-21 3500 Engine Reference Manual Contents Page (for SEBF8205)

SEBF8204 Label for 3500 Engine Reference Manual Binder (SEBF8205)

SEBF8205 Reference Manual 3500 Engines Salvage and Reuse Guides

SEBF8206-03 Specifications for Connecting Rods on 3116 Off-Highway Truck Engines

SEBF8207-02 Flywheel Specifications for 3116 Engines

SEBF8208 Machining O-ring Groove into Face of Oversize Bolted-Head Hydraulic Cylinders

SEBF8209-17 3116 Engine Reference Manual Contents Page (SEBF8211)

SEBF8210-01 Label for 3116 Engine Reference Manual Binder (SEBF8211)



SEBF8213-01 Overhaul Check List 3500 Family of Engines



SEBF8216 Label for 3176 Engine Reference Manual Binders (SEBF8214)


SEBF8218-03 Specifications for Cylinder Head Assemblies 3114 and 3116 Engines

SEBF8219-02 Salvage of Cylinder Block Liner Bores 3500 Family of Engines

SEBF8220 Specifications for Damper Inspection 3114 and 3116 Engines

SEBF8221 Salvage of 8W-1365 Planetary Carrier (Outer Pin Bore) Using Pressed-in Sleeves for 785 and 789 Trucks

SEBF8222 Salvage of Planetary Carrier Pin Bores Using Tapered Roller Bearings for 8W-1365 (785/789) Trucks and 8X-0603 (793) Trucks

SEBF8223 Salvage of Inner Planetary Carrier Pin Bores Using Tapered Roller Bearings for 785, 789, and 793 Trucks

SEBF8224-02 Specifications to Measure and Salvage Crankshafts for 3054 and 3056 Engines

SEBF8225-03 Reusability of Final Drive Splines on 785, 789 and 793 Off-Highway Trucks

SEBF8226-03 Specifications and Salvage for Spacer Plates on 3500 Engines

SEBF8227 Salvage of Differential Housing Assembly Used on 785, 789 and 793 Trucks

SEBF8228-04 Procedure to Clean and Inspect One and Two-Piece Pistons in 3114/3116 Engines

SEBF8229-06 Specifications for Cylinder Head Assembly - 3176 Engines

SEBF8230 Reference Manual 3200 Engine Salvage and Reuse Guides




SEBF8234 Reference Manual 3300 Engine Salvage and Reuse Guide



2SEBF8237-09 3300 Engine Component Reuse and Salvage Index

SEBF8238 Reference Manual 3400 Engine Salvage and Reuse Guides






SEBF8242-06 Verification of Connecting Rod Eye Bushing Retention Using the 5P-8639 Connecting Rod Bushing Press Group

SEBF8243-03 Specifications for Measurement of Camshafts in 3176 Engines

SEBF8244 Specifications for Connecting Rods on 3176 Engines

SEBF8245 Visual Inspection of Camshafts in 3176 Engines

SEBF8246-01 Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Engines

SEBF8247 Specifications for Cylinder Liner Measurement and Salvage in 3176 Family of Engines

SEBF8248 Truck Engine Reuse and Salvage Guides

SEBF8249 Label for Truck Engine Reference Manual Binder (SEBF8248)

SEBF8250-12 Truck Engine Reference Manual Contents Page (SEBF8238)

SEBF8251-03 Specifications for Measurement of Camshafts in 3114/3116 Engines

SEBF8252 Installing Tapered Roller Bearings in 6G-6352 Planet Gears in Final Drives of Off-Highway Trucks

SEBF8253 Hydraulic Piston Pump

SEBF8254 Removing Wear from Seal Grooves in Seal Ring (Stator) Carrier Assemblies for Off-Highway Trucks

SEBF8255-04 Procedure to Install Top Deck Liner Seat Inserts Into Cylinder Blocks of 3500 Engines

SEBF8256 Visual Inspection of Camshafts and Rocker Arm Rollers Used in 3406E Engines

SEBF8257 Procedure to Salvage Tang Slots and Reaction Dowel Holes in Transmission Clutch Plates, Pistons, and Housings

SEBF8258 Specifications for Crankshaft Measurement on 3176 Engines

SEBF8259 Procedure to Clean and Inspect Two-Piece Pistons in 3176 Engines

SEBF8260 Camshaft Roller Followers Used in 3176 Engines

SEBF8261-03 Installing a 7C-6208 Cylinder Sleeve in 3114 and 3116 Engines

SEBF8262-02 Reuse of Cylinder Heads on 3176 Engines with Injector Tip Damage

SEBF8263-03 Procedure to Repair Top Deck Pitting on Cylinder Blocks of 3500 Engines

SEBF8264 Camshaft Roller Followers Used in 3114 and 3116 Engines

SEBF8265 Procedure to Clean and Inspect One and Two-Piece Pistons in 3406E Engines

SEBF8266-01 Rocker Arms and Rocker Arm Shafts for 3176 Engines

SEBF8267-01 Rocker Arms and Rocker Arm Shafts for 3114 and 3116 Engines

SEBF8268-02 Canceled, replaced by SEBF8261

SEBF8269 Procedure to Inspect and Salvage the Gear on 1W-5009 (D9N) and 6I-3746 (988F) Crankshaft Assemblies Used in 3408 Engines

SEBF8270-05 Specifications for Cylinder Head Assemblies in 3406E Engines

SEBF8271-04 Salvage of Steering Arm and Steering Arm (T-Bar) Tapers on 789 and 793 Off-Highway Trucks

SEBF8272 Tool List for Power Train Components Used in 785, 789, and 793 Off-Highway Trucks

SEBF8273-02 Specifications for Damper Inspection in 3176 Engines

SEBF8274-01 Using Rod Eye Bushing Installation and Removal Tools

SEBF8275 Major Non-Engine Power Train Component Receiving and Inspection Report for 785, 789, and 793 Off-Highway Trucks

SEBF8276 Salvage of Water Pumps Used in 3176 Engines

SEBF8277 Canceled, replaced by SEBF8192

SEBF8279-03 Procedure for Using the 9U-7361 or 9U-7362 Portable Oil Transfer Filter Cart

SEBF8280 Canceled

SEBF8281 Installation of Oversize Water Directors

SEBF8282-01 Specifications and Salvage for Cylinder Blocks on 3176 Engines

SEBF8283 Reworking Cylinder Head Bolt Holes on 3500 Engines

SEBF8284 Canceled

SEBF8285-01 Canceled



SEBF8286 Reference Manual for 785, 789, and 793 Off-Highway Trucks Salvage and Reuse Guides

2SEBF8287-19 785, 789, and 793 Off-Highway Trucks Salvage and Reuse Guide Contents (SEBF8286)

SEBF8288 Label for 785, 789, and 793 Off-Highway Trucks Reference Manual Binder (SEBF8286)

2SEBF8289-10 785, 789, and 793 Off-Highway Trucks Reuse and Salvage Index (SEBF8286)

SEBF8290-02 Visual Inspection of Two-Piece Pistons

SEBF8291-05 Top Deck Threaded Hole Repair in 3300 and 3400 Series Engines

SEBF8292-04 Excavator Inspection

SEBF8293-04 Visual Inspection of Plunger and Barrel Assembly Used in New Scroll Fuel Systems of 3204, 3300, and 3400 Engines

SEBF8294-03 Visual Inspection of Lifter Assembly Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8295-04 Visual Inspection of Camshafts Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8296-02 Inspection of Rack Bar Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8297-04 Visual Inspection of Housing Assembly Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8298-03 Visual Inspection of Governor Assembly Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8299-01 Visual Inspection of Fuel Transfer Pumps Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8300-02 Visual Inspection of Timing Advance Used in New Scroll Fuel Systems of 3300 and 3400 Engines

SEBF8301-08 Inspection and Reuse of Critical Fasteners Used in All Engines

SEBF8302-02 Reusing Combustion Gaskets Used on 3600 Diesel Engines

SEBF8303-02 Procedure to Inspect Piston Pins

SEBF8304-02 Procedure to Salvage Oil Pan Assemblies on 3516 Engines

SEBF8305 Procedure to Install Bearings in the Rear Auxiliary Drive Group Used in 793 Off-Highway Trucks

SEBF8306 Canceled - Refer to SEBF8322

SEBF8307 Canceled

SEBF8308 Canceled

SEBF8309 Canceled

SEBF8310 Transmission Reuse and Salvage Guides Reference Manual

SEBF8311 Label for Transmission Reuse and Salvage Guides Reference Manual Binder (SEBF8310)

2SEBF8312-03 Transmission Reuse and Salvage Guides Index (SEBF8310)

2SEBF8313-06 Transmission Reuse and Salvage Guides Contents (SEBF8310)

SEBF8314 Torque Converter/Drive Line/Drive Axle Salvage and Reuse Guides Reference Manual

SEBF8315 Torque Converter/Drive Line/Drive Axle Salvage and Reuse Guides Binder Label (SEBF8314)

SEBF8316-01 Torque Converter/Drive Line/Drive Axle Salvage and Reuse Guides Index (SEBF8314)

SEBF8317-04 Torque Converter/Divider Drive Line/Drive Axle Salvage and Reuse Guides Contents Page (SEBF8314)

SEBF8318 Final Drive, Steering System, Wheel Braking System, Wheels and Tires Salvage and Reuse Reference Manual

SEBF8319 Final Drive, Steering System, Wheel Braking System, Wheels and Tires Salvage and Reuse Binder Label (SEBF8318)

2SEBF8320-01 Final Drive, Steering System, Wheel Braking System, Wheels and Tires Salvage and Reuse Index (SEBF8318)

SEBF8321-03 Final Drive, Steering System, Wheel Braking System, Wheels and Tires Salvage and Reuse Reference Manual Contents Page (SEBF8318)

SEBF8322 Fuel Systems Reuse and Salvage Guides Reference Manual

SEBF8323-02 Label for Fuel Systems Reuse and Salvage Guides Binder (SEBF8322)

2SEBF8324-11 Fuel Systems Reuse and Salvage Guides Contents Page (SEBF8322)

2SEBF8325-06 Fuel Systems Reuse and Salvage Guides Index (SEBF8322)

SEBF8326 Testing and Reuse of Fuel Injection Pump Housing

SEBF8327-02 Testing and Reuse of Low Pressure Fuel System

SEBF8328-06 Backhoe Loader Inspection

SEBF8329-03 Engines Updates for 793 and 793B Off-Highway Trucks



SEBF8330-02 Procedure to Repair Cylinder Block Pump Mounting Pad on 3406B Engines

SEBF8331-02 Engine Updates for 789 and 789B Off-Highway Trucks

SEBF8332 Transmission Transfer Gear and Torque Converter Updates for 994 Wheel Loaders

SEBF8333 Backhoe Loader SOS Sampling Valve and Filter Cart Installation Procedures

SEBF8334 Installing New Tapered Roller Bearings in 8X-1019, 102-0313, 125-5937 and 132-4515 Wheel Assemblies on 793 Off-Highway Trucks

SEBF8335-01 Engine Updates for 777B and 777C Off-Highway Trucks and 776B and 776C Tractors

SEBF8336-01 Engine Updates for 785 and 785B Off-Highway Trucks and 784B Tractors

SEBF8337-01 Engine Updates for 994 Wheel Loaders

SEBF8338-01 Engine Updates for 5130 and 5230 Excavators

SEBF8339-02 Engines Updates for Track-Type Tractors

SEBF8340 Fuel Systems Troubleshooting Guide for 3204, 3300, and 3400 Engines with New Scroll Fuel Systems

SEBF8341 (Canceled)

SEBF8342-01 Transmission, Torque Converter, and Final Drive Updates for 768C Through 793B Off-Highway Trucks

SEBF8343-01 Fuel Systems Tooling List for 3000 Family of Engines

SEBF8344-01 Tamper Resistant Plugs and Bolts Used to Prevent Changes to Air Fuel Ratio Control (AFRC) Settings

SEBF8345-03 938-980 Wheel Loaders Inspection

SEBF8346-01 Air Fuel Ratio Control for New Scroll Fuel Systems (NSFS)

SEBF8347-01 Fuel and Fuel System Related Problems

SEBF8348-02 Nozzles and Lines for New Scroll Fuel Systems (NSFS)

SEBF8349 Canceled

SEBF8350-02 CHS Inspection Specifications for Backhoe Loaders

SEBF8351-02 Mobil-trac Belts

SEBF8352 Specifications and Salvage for Cylinder Blocks on C-10 and C-12 Engines

SEBF8353-02 3208 Marine Engine Fuel Systems

SEBF8354 Cleaning Guide Equipment & Chemical Recommendations Reference Manual

SEBF8355-02 Cleaning Guide Equipment & Chemical Recommendations Contents Page

SEBF8356 Introduction to the Cleaning Guide

SEBF8357 General Cleaning Methods

SEBF8358 Initial Cleaning Area

SEBF8359 Main Shop

SEBF8360 Spec Shop

SEBF8361 Track Shop

SEBF8362 Truck Shop

SEBF8363 Examples of Parts Cleaning Racks and Baskets

SEBF8364 Cleaning Guide Equipment & Chemical Recommendations Binder

SEBF8366 Cleaning Rear Axle Housings of 785 and 789 Off-Highway Trucks

SEBF8367-04 CHS Inspection Specifications Guideline Index

2SEBF8368-10 CHS Inspection Specifications Guideline Contents Page

SEBF8369 CHS Inspection Specifications Reference Manual

SEBF8370 Cleaning Rear Axle Housing Assemblies of 793 Off-Highway Trucks

SEBF8371 Salvage of Cylinder Block Liner Bores for 3400 Engines

SEBF8372-03 CHS Inspection Specifications for Wheel Loaders

SEBF8373-02 Specifications for Cylinder Head Assemblies 3400 Engines

SEBF8374 Specifications for Cylinder Head Assemblies 3200 Engines

SEBF8375-02 Specifications for Cylinder Head Assemblies 3300 Engines



SEBF8376 Specifications for Cylinder Head Assemblies 1404 and D Model Engines

SEBF8377-01 Specifications and Salvage Procedures for Front Gear Train on 3500 Engines

SEBF8378 Cylinder Head Reuse and Salvage Manual

SEBF8379-02 Cylinder Head Reuse and Salvage Manual Contents Page

SEBF8380-01 Cylinder Head Reuse and Salvage Manual Index

SEBF8381 Cylinder Head Reuse and Salvage Manual Binder

SEBF8382 Cylinder Head Rebuild Process

SEBF8383-02 Off-Highway Truck Inspection

SEBF8384-01 Cleaning Guideline Equipment and Chemical Recommendations Index

SEBF8385 Dealer Spec Shop Concepts Binder

SEBF8386 Cylinder Liners for 3600 Engines

SEBF8387-05 Main Bearing and Bolt Hole Repair In 3400 and 3500 Series Engines

SEBF8398 Dealer Spec Shop Concepts Reference Manual

SEBF8388-02 CHS Inspection Reference for OHT's

SEBF8389 Cylinder Head Racks

SEBF8390 Hardware Containers

SEBF8391 Engine Component Racks

SEBF8392 Engine Stands

SEBF8393 Hardware Carts

SEBF8394 Parts Cabinets

SEBF8395 Engine Dyno Room

SEBF8396 Cylinder Head Area

SEBF8397 Special Tools

SEBF8398 Dealer Spec Shop Concepts Manual

SEBF8399-01 Dealer Spec Shop Concepts Manual Contents Page (SEBF8398)

SEBF8400 Canceled

SEBF8401 Dimensions of Articulated Joints and Steering Cylinder Bores for Motor Graders

SEBF8403 Reuse Specifications for ABB Turbocharger Housings on 3500 Engines

SEBF8404 Kidney Looping Track Feller Buncher Hydraulic Oil

SEBF8405-02 Kidney Loop Filtration Process for Rebuilt Engines

SEBF8406-01 3500 Series Reuse and Salvage Manual Binder

SEBF8407 3600 Series Reuse and Salvage Manual

SEBF8408 3600 Series Reuse and Salvage Manual Binder

SEBF8409-08 3600 Series Reuse and Salvage Manual Contents Page

SEBF8410-05 3600 Series Reuse and Salvage Manual Index

SEBF8413 3116/3126 Series Reuse and Salvage Manual Binder





SEBF8418-03 Salvage of Water Pumps In 3500 Engines

SEBF8419 Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders

SEBF8420 Rebuilding Front Axles, Spindle Housings, and Lean Bars

SEBF8421-01 Field Repair Welding Procedure of Centershift Bracket Assembly for 16G and 16H Motor Graders

SEBF8422-01 Aftercoolers in 3500 Engines

Pgina 10 de 89Global Basic Search - SEBF8029 - Index of Publications on Reusability or Salva...


SEBF8423 General Information, Component Identification, and Tooling for 3600 Engines Unit Injectors

SEBF8424 Typical Layout for 3600 Engine Unit Injector Repair and Calibration Room

SEBF8425 Service Checklist for 3600 Engine Unit Injectors

SEBF8426 Disassembly of 3600 Unit Injectors

SEBF8427 3600 Unit Injector Cleaning and Inspection

SEBF8429 Assembly of 3600 Engine Unit Injectors

SEBF8430 Calibration of 3600 Engine Unit Injectors

SEBF8431 3600 Unit Injector Reconditioning Manual

SEBF8432 3600 Unit Injector Reconditioning Manual Binder only

SEBF8433 3600 Unit Injector Reconditioning Manual Contents Page

SEBF8434 3100 Governor Inspection and General Information for Mechanical Governor Groups Used in 3114, 3116 and 3126 Engines Equipped with Mechanical Unit Injectors (MUI)

SEBF8435-02 Procedures to Salvage Oil Pan Assemblies in 3500 Series Engines

SEBF8436 Hydraulic System Flushing Procedure for 320C Hydraulic Excavator

SEBF8437-01 Main Bearing Bolt Hole Repair in 3500 Series Engines

SEBF8438-03 Procedure for Filtering Off-Highway Trucks (785-797) Rear Axle Oil

SEBF8440-01 Cleaning Caterpillar Asphalt Pavers

SEBF8442-02 Contamination Control of Rebuilt Engines by Using a Particle Counting Process

SEBF8443-02 Procedure to Inspect and Repair Wheels Used on Off-Highway Trucks

SEBF8444-02 797/797B Center Steering Arm Straight Bore Inspection and Salvage Procedure

SEBF8445-01 Procedure for Filtering Off-Highway Trucks (769-793B) Transmission Oil

SEBF8446-02 Procedure for Filtering Off-Highway Truck Hydraulic Oil

SEBF8447-02 Procedure for Filtering Excavators (311-375) Hydraulic Oil

2SEBF8448-02 Procedure for Adding Filter Capability to Solvent Stands

SEBF8451 Engine Specialization Shop Standards

SEBF8452-03 Kidney Looping Transmission Oil on 988F, 980G, 972G, 966G, 962G, and 950G Wheel Loaders Equipped with Ecology Drain

SEBF8453 Procedure for Filtering Motor Grader Hydraulic Oil

SEBF8454-01 Procedure for Filtering Off-Highway Trucks (769-777) Rear Axle Oil

SEBF8455-02 Procedure for Filtering Track-Type Tractor (D3-D6) Hydraulic Oil

SEBF8456-02 Procedure for Filtering Track-Type Tractor (D7-D11) Hydraulic Oil

SEBF8457-02 Procedure for Filtering Wheel Tractor Scraper Hydraulic Oil

SEBF8458-05 Kidney Looping Transmission Oil on 992G, 938G, 928G, and 924G Wheel Loaders Without Ecology Drain

SEBF8459-01 Kidney Looping Transmission Oil on 994D Wheel Loader

SEBF8460-01 Kidney Looping 769D, 771D, 773D, 773E, 775D, 77E5E, 793C, and 797 Off-Highway Truck Transmission and Torque Converter Oil

SEBF8461-01 Kidney Looping Transmission Oil on 12H, 14H, 16H, 120H, 135H, 140H, 143H, 160H, and 163H Motor Graders Without Ecology Drain

SEBF8462-01 Kidney Looping Transmission Oil on 24H Motor Grader Equipped with Ecology Drain Valve

SEBF8463-01 Kidney Looping Wheel Tractor Scraper Transmission Oil For 611, 613C II, and 615C II

SEBF8464-02 Procedure for Kidney Looping 988B, 988F, 988G, 990, 990 II, 992, 992B, 992C, 992D, 992G, 994, 994D Wheel Loaders Front and Rear Axle Oil

SEBF8465-03 Kidney Looping Transmission Oil on D6R, D7R, D8R, D9R, D10R, and D11R Track-Type Tractor Equipped with Ecology Drain Valve

SEBF8466-03 G and H Series Motor Grader Inspection (Excluding 24H Motor Grader)

SEBF8467-01 Power/Control Group: Piston, Cylinder, Tie Rods and Nuts, Spool Valve Components, Accumulators

SEBF8468-01 Tool Guidance Group: Upper/Lower Tool Bushings, Thrust Ring, Tool Retainer Pin, Front Head

SEBF8469-01 External Components Group: Buffers, Silencing Buffers, Wear Plates, Housing/Side Plates, Tools

SEBF8470 Proper Oil Changing Procedures

SEBF8472 300C Series Excavator Inspection



2SEBF8474-02 Hydraulic Hammer Reuse and Salvage Manual Contents Page

SEBF8475 Hydraulic Hammer Reuse and Salvage Guide Manual Binder Only

SEBF8476-01 Caterpillar Hydraulic Hammers

SEBF8477 Hydraulic Hammer R&S Guide Manual Contents Page

SEBF8478-01 Hammer Weld Salvage Section Weld/Machine Repair of Front Head and Housing/Side Plates

SEBF8479-03 3500 R&S Manual Contents Page Volume 2

SEBF8480 3500 R&S Manual Binder Only Volume 2

SEBF8481 Kidney Looping 621-651 G&E Series Front Engine Wheel Tractor Scrapers

SEBF8482-01 Obtaining Oil Samples for Analysis

SEBF8483 Procedure for Kidney Looping Front Wheel Groups of 793 and 797 Off-Highway Trucks

SEBF8484 Kidney Looping Implement/Transmission Oil on ChallengerTM MT700 Series Tractors

SEBF8485-01 Cleaning Hose and Tube Assemblies Using the 130-6061 & 156-0058 Hose Cleaner Groups

SEBF8486-01 Procedure for Kidney Looping Articulated Truck Transmission Oil

2SEBF8487-01 Rebuilding Wheel Tractor Scraper Hitches, Brackets and Scraper Kingbolt Housings

2SEBF8488-01 988G, 990 II, 992G, and 994D Wheel Loader Inspection

SEBF8489-03 Procedure for Kidney Looping Articulated Truck Hydraulic Oil

SEBF8490 Cleaning Front Wheel Groups of 793 and 797 Off-Highway Trucks

SEBF8493-02 Procedure for Kidney Looping Small and Medium Wheel Loader Hydraulic Oil

SEBF8494-01 Procedure for Kidney Looping Large Wheel Loader Hydraulic Oil

2SEBF8496-02 CHS Inspection Specifications for 988G, 990 II, 992G, and 994D Wheel Loaders

SEBF8497 Articulated Truck Ejector Cylinder Salvage (Model D400E Series II)

SEBF8702 Canceled

SEBF8703 Procedure for Filtering 5000 Series Front Shovels and Mass Excavator (5110B 5230B) Hydraulic Oil

SEBF8706-01 Procedure for Filtering Wheeled Excavator (M312-M320) Hydraulic Oil

SEBF8716-01 24H Motor Grader Inspection

SEBF8717 Hose & Coupling Assembler Training Introduction

SEBF8718 Hose Identification

SEBF8719 Coupling Identification

SEBF8720 Hose Assembly Identification

SEBF8721 Contamination Control

SEBF8722 Tooling and Quality Inspection

SEBF8723 Hose & Coupling Assembler Checklist

SEBF8724 Procedure for Kidney Looping Off-Highway Truck Steering Oil

SEBF8725 Procedure for Kidney Looping Large Wheel Loader Steering Oil

SEBF8726 Procedure for Kidney Looping Compact Equipment Hydraulic Oil

SEBF8727-05 Hose & Coupling Assembler Training Manual Contents Page

SEBF8728 Inspection and Reuse of Drive Line Fasteners

SEBF8729-01 CHS Inspection Reference Information for D3 to D5 C and G Series HYSTAT Track-Type Tractor

SEBF8730 C-9 Series Reuse and Salvage Manual

SEBF8731-03 C-9 Series Reuse and Salvage Manual Contents Page

SEBF8732 C-9 Series Reuse and Salvage Manual Index

SEBF8733 C-9 Series Reuse and Salvage Manual Binder Only

SEBF8734 Specifications for Cylinder Liner Measurement and Salvage in C-9 Engines

SEBF8735 Specifications and Salvage for Cylinder Blocks on C-9 Engines

SEBF8736-01 Specifications for Cylinder Head Assemblies on C-9 Engines



SEBF8737 Reuse of Cylinder Heads on C-9 Engines with Injector Tip Damage

SEBF8738 Salvage of Fractured Connecting Rods

SEBF8739 Procedure to Clean and Inspect 2-Piece Pistons in C-9 Engines

SEBF8740 Salvage of Water Pumps Used in C-9 Engines

SEBF8741 Specifications for Crankshaft Measurements on C-9 Engines

SEBF8742-01 Specifications for Measurement of Camshafts in C-9 Engines

SEBF8743 Visual Inspection of Camshafts on C-9 Engines

SEBF8744 Camshaft Roller Followers Used in C-9 Engines

SEBF8745 Rocker Arms and Rocker Arm Shafts for C-9 Engines

SEBF8746 Specifications to Machine Reaction Faces of Flywheel Assemblies on C-9 Engines

SEBF8747 Specifications for Damper Inspection in C-9 Engines

SEBF8748-01 D3 to D5 G Series HYSTAT Track-Type Tractor

SEBF8749-02 D3 to D5 C Series HYSTAT Track-Type Tractor (TTT) Inspection

SEBF8750 Procedure for Kidney Looping 627, 637, and 657 G & E Series Wheel Tractor Scraper Transmission Oil

SEBF8753-01 CHS Inspection Reference for G and H Motor Graders

SEBF8754 Use Again Wear Information for Cat Lexion Combine

SEBF8755-01 933C and 939C Track-Type Loader Inspection

SEBF8756 Track-Type Loader Reference Information

SEBF8757-01 Procedure for Off-board Filtering 307-385B Excavator Hydraulic Oil Equipped with Auxiliary Hydraulic Lines

SEBF8758-01 Procedure for Kidney Looping Track-Type Loader Hydraulic Oil

SEBF8759 Reusability of Rear Final Drive Splines 769 784 Off-Highway Truck

SEBF8772-01 797 Off-Highway Truck Rear Link Reusability

SEBF8773-01 910-936 E G and IT12 - IT28B G Series Small Wheel Loader Inspection (Excluding 910G, 914G & IT14G Hystat)

SEBF8774-01 M325B Series Wheeled Excavator Inspection

SEBF8775-02 M312-M320 A Series Wheeled Excavator Inspection

SEBF8776-01 M300 Series Wheeled Excavator Reference Information

SEBF8777 953, 963, and 973 C Series Track-Type Loader Inspection

SEBF8779 Procedure for Kidney Looping Wheel-Type Skidder Hydraulic Oil

SEBF8780-01 Procedure for Kidney Looping D Series Backhoe Loader Hydraulic Oil

SEBF8781 Procedure for Kidney Looping Vibratory Compactors Hydraulic Oil

SEBF8782 Application of Abrasion-Resistant Material

SEBF8783 Salvage of AT Center Differential Carrier Assembly by Installation of Service Repair Cage (725-740/Ejector, D250E II-D400E II/Ejector)

SEBF8784-01 D-Series Backhoe Loader Inspection

SEBF8785 Procedure for Kidney Looping Telescopic Handlers Hydraulic Oil

SEBF8786 Procedure for Kidney Looping Feller Buncher Hydraulic Oil

SEBF8787 Procedure for Kidney Looping Wheel Harvester Hydraulic Oil

SEBF8788 Procedure for Kidney Looping Forwarder Hydraulic and Power Train Oil

SEBF8789 Procedure for Kidney Looping Underground Mining Truck Hydraulic Oil

SEBF8790 Procedure for Kidney Looping Underground Articulated Truck Hydraulic Oil

2SEBF8791-01 Procedure for Kidney Looping Load, Haul, Dump Hydraulic Oil

SEBF8792 Procedure for Kidney Looping Pneumatic Compactor Hydraulic Oil

SEBF8793 Repairing Cylinder Block with an Oil Porosity Complaint

SEBF8797-01 Procedure for Filtering Final Drives, Rear Axles and Differentials on Caterpillar Machines

SEBF8798-01 Procedure for Kidney Looping 735 and 740 Articulated Truck Hydraulic Tank Oil



SEBF8800 Procedure for Off-board Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxuiliary Lines

SEBF8802 Procedure for Kidney Looping 210-215 Telescopic Handler Hydraulic Oil

SEBF8803 Procedure for Kidney Looping B Series Telescopic Handler Hydraulic Oil

SEBF8804 Cleaning Components with Carbon Dioxide

SEBF8805 Motor Grader Circle Drive Pinion Reuse Guide

SEBF8806 Procedure for Kidney Looping 735 & 740 Articulated Truck Steering Tank Oil

SEBF8807 Salvage of Cylinder Block Liner Bores in C-15 Engines

SEBF8813 Component Rebuild Center (CRC) Development Guide CD

SEBF8814-01 Specifications for Measurements Camshafts 3054 & 3056 Engine

SEBF8815 Visual Inspection of Camshafts on 3054 and 3056 Engines

SEBF8817 Specifications for Cylinder Liner Measurement and Salvage 3054 & 3056 Engines

SEBF8818 Specifications and Salvage for Cylinder Blocks on 3054 and 3056 Engines

SEBF8819 Specifications for Cylinder Head Assembly 3054 and 3056 Engines

SEBF8820 Reuse of Cylinder Heads on 3054 and 3056 Engines with Injector Tip Damage

SEBF8821 Procedure to Clean and Inspect 2-Piece Pistons on 3054 and 3056 Engines

SEBF8822 Valve Train Assembly for 3054 and 3056 Engines

SEBF8823 Camshaft Solid Followers Used in 3054 and 3056 Engines

SEBF8824 Specifications to Machine Reaction Faces of Flywheel Assemblies on 3054 and 3056 Engines

SEBF8825 Specifications for Damper Inspection on 3054 and 3056 Engines

SEBF8827 Slipper Followers and Camshaft Roller Followers

SEBF8828 Procedure for Kidney Looping Knuckleboom Loader Hydraulic Oil

SEBF8830 3054 and 3056 Engine Reuse and Salvage Manual

SEBF8831-05 3054 and 3056 Engine Reuse and Salvage Manual Contents Page (SEBF8830)

SEBF8832 3054 and 3056 Engine Reuse and Salvage Manual Index

SEBF8833 3054 & 3056 Engine Reuse and Salvage Manual Contents Page

SEBF8840 Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems

SEBF8841 Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers

SEBF8875 Main Bearing Bolt Hole Repair C-15, C-16, C-18 Engines

SEBF8876 Spacer Plate for C-15, C-16, and C-18 Engines

SEBF8877 Specifications for Cylinder Head as C-15, C-16, C-18 Engines

SEBF8878 Installation of the Top Deck Insert in C-15, C-16, & C-18 Reman Engines

1SEBF8879 Repair/Replace Large OHT Body Pivot Bores and Suspension Bores

2SEBF8882-01 Using Lock-N-Stitch Procedures for Casting Salvage

SEBF8891 797 Off Highway Truck Reuse and Salvage Index

1SEBF8892 Caterpillar Hammer Failure Analysis Guide

SEBF8912 Visual Inspection of 180-2915 Coupling Assembly

1New Guidelines for Reusable Parts and Salvage Operations, as of July 13, 2004.

2Revisions of publications as of July 13, 2004.

SMCS Cross Reference of Active Guidelines For Reusable Parts



Form No. SMCS Code REHS1757 4150 REHS1780 5050 REHS1790 6129-FRM REHS2099 7201 REHS2110 4305 REHS2111 4305 REHS2112 4305 REHS2113 4305 SEBF8002 1105, 1108, 1109 SEBF8004 3100, 3101, 3128 SEBF8005 3100 SEBF8006 3169, 3170 SEBF8007 3001, 3101 SEBF8008 3131 SEBF8009 1230 SEBF8011 3101 SEBF8013 3155, 3190 SEBF8014 3150 SEBF8016 3100, 3101, 3102, 3113 SEBF8017 3150, 3101 SEBF8018 1052 SEBF8019 1052 SEBF8021 3150, 3030, 3159, 3176 SEBF8028 3150 SEBF8029 0000 SEBF8031 3155, 3190 SEBF8032 5058, 5070 SEBF8033 3201, 3203, 3222, 4351, 5058,

5070 SEBF8034 1105, 1108 SEBF8036 3150 SEBF8037 4252, 6200 SEBF8038 5207 SEBF8039 1202 SEBF8041 1202 SEBF8042 1202 SEBF8043 1202 SEBF8044 3101, 3129 SEBF8045 1206 SEBF8046 1205 SEBF8048 3253 SEBF8049 1214

Form No. SMCS Code SEBF8050 1156 SEBF8051 1214 SEBF8054 1202 SEBF8056 4113 SEBF8057 1250 SEBF8058 1361 SEBF8059 1214 SEBF8060 3101, 3150 SEBF8061 1106 SEBF8062 1054 SEBF8063 1218 SEBF8064 1218 SEBF8066 1209 SEBF8067 1209 SEBF8068 1216 SEBF8069 1201 SEBF8070 3200 SEBF8071 1052 SEBF8072 5100 SEBF8073 5061, 5073 SEBF8074 5061, 5073 SEBF8075 1218 SEBF8076 1201 SEBF8077 1378 SEBF8078 4055 SEBF8079 4055 SEBF8080 5055 SEBF8081 5055 SEBF8082 3101, 3105 SEBF8083 4205 SEBF8084 4054 SEBF8085 1365, 1378 SEBF8086 3101 SEBF8087 3129 SEBF8088 3108 SEBF8090 4050, 4205 SEBF8091 3000 SEBF8092 1052 SEBF8093 4055



SEBF8094 1202 SEBF8095 4255

Form No. SMCS Code SEBF8096 3151 SEBF8097 1210 SEBF8098 3155 SEBF8099 3169 SEBF8100 0000 SEBF8101 1201 SEBF8102 1202 SEBF8103 1202 SEBF8104 1210 SEBF8105 1209, 1281 SEBF8106 1100, 1101, 1103, 1104, 1105,

1108, 1109 SEBF8107 1214, 1215 SEBF8108 1218, 1219 SEBF8109 1216 SEBF8110 1361 SEBF8113 5058, 5070 SEBF8114 3155 SEBF8115 3155, 3190 SEBF8116 3159 SEBF8117 6154 SEBF8118 3105 SEBF8119 3258 SEBF8120 4210 SEBF8121 3284 SEBF8122 4202 SEBF8123 4058 SEBF8126 3251, 3253 SEBF8127 5102 SEBF8129 1100, 1101, 1103, 1104, 1105,

1108 SEBF8130 1353, 1377 SEBF8131 1221 SEBF8132 4054, 4184 SEBF8133 5070 SEBF8134 3152, 3158 SEBF8135 4092 SEBF8136 5058, 5070 SEBF8137 5070 SEBF8138 5070 SEBF8139 5058 SEBF8140 5058 SEBF8141 5058 SEBF8142 5058 SEBF8143 7201

Form No. SMCS Code SEBF8144 5058, 5070 SEBF8146 1210 SEBF8147 3016, 3154, 4104, 4133 SEBF8148 0000 SEBF8149 1218 SEBF8150 1214 SEBF8151 1201 SEBF8152 1205 SEBF8153 5053 SEBF8154 1210 SEBF8155 1100 SEBF8156 1202 SEBF8157 1201 SEBF8158 4003, 4101, 4109 SEBF8159 7201 SEBF8160 1302 SEBF8161 5073 SEBF8162 1100 SEBF8163 3186, 4092 SEBF8164 1216 SEBF8165 5058, 5070 SEBF8166 1201 SEBF8167 1000 SEBF8168 4092 SEBF8169 1000 SEBF8170 1304 SEBF8171 1000 SEBF8172 1112 SEBF8173 3159 SEBF8174 1102, 1121, 1123



SEBF8175 1205 SEBF8176 5057 SEBF8177 1214 SEBF8178 3150 SEBF8179 5070 SEBF8180 5070 SEBF8181 3186 SEBF8182 4051 SEBF8183 4051, 4130 SEBF8185 4055 SEBF8186 1154 SEBF8187 0000 SEBF8188 1201, 1206 SEBF8189 5070



Form No. SMCS Code SEBF8190 4051 SEBF8191 1209 SEBF8192 1201 SEBF8193 4055 SEBF8194 7213 SEBF8195 3064 SEBF8196 1221 SEBF8197 1156 SEBF8198 1201, 1217 SEBF8199 4251 SEBF8200 3284 SEBF8201 1201 SEBF8202 1152 SEBF8203 1000 SEBF8204 1000 SEBF8205 1000 SEBF8206 1218 SEBF8207 1156 SEBF8208 5100 SEBF8209 1000 SEBF8210 1000 SEBF8211 1000 SEBF8212 1000 SEBF8213 1000 SEBF8214 1000 SEBF8215 1000 SEBF8216 1000 SEBF8217 1000 SEBF8218 1000, 1100 SEBF8219 1000 SEBF8220 1205 SEBF8221 4092 SEBF8222 4092 SEBF8223 4092 SEBF8224 1202 SEBF8225 4051 SEBF8226 1221 SEBF8227 3258 SEBF8228 1214 SEBF8229 1000, 1100 SEBF8230 1000 SEBF8231 1000 SEBF8232 1000 SEBF8233 1000

Form No. SMCS Code SEBF8234 1000 SEBF8235 1000 SEBF8236 1000 SEBF8237 1000 SEBF8238 1000 SEBF8239 1000 SEBF8240 1000 SEBF8241 1000 SEBF8242 1218 SEBF8243 1210 SEBF8244 1218 SEBF8245 1210 SEBF8246 1059 SEBF8247 1216 SEBF8248 1000 SEBF8249 1000 SEBF8250 1000 SEBF8251 1210 SEBF8252 4055 SEBF8253 5070 SEBF8254 3129, 3150 SEBF8255 1201, 1217 SEBF8256 1209, 1210 SEBF8257 3150 SEBF8258 1202 SEBF8259 1214 SEBF8260 1209 SEBF8261 1201 SEBF8262 1000, 1100 SEBF8263 1201 SEBF8264 1209 SEBF8265 1214 SEBF8266 1102, 1123 SEBF8267 1102, 1123 SEBF8269 1204 SEBF8270 1000, 1100



SEBF8271 4305 SEBF8272 3000 SEBF8273 1205 SEBF8274 1218 SEBF8275 3000, 4000 SEBF8276 1350, 1361 SEBF8279 5050 SEBF8280 5050

Form No. SMCS Code SEBF8281 1115 SEBF8282 1201 SEBF8283 1100 SEBF8286 3000, 4000, 5000 SEBF8287 3000, 4000, 5000 SEBF8288 3000, 4000, 5000 SEBF8289 3000, 4000, 5000 SEBF8290 1000, 1214 SEBF8291 1201 SEBF8292 0000 SEBF8293 1250, 1251 SEBF8294 1250, 1251 SEBF8295 1250, 1251 SEBF8296 1250, 1251 SEBF8297 1250, 1251 SEBF8298 1250, 1264 SEBF8299 1250, 1256 SEBF8300 1250 SEBF8301 1000, 7553 SEBF8302 1124 SEBF8303 1000, 1214 SEBF8304 1302 SEBF8305 1157 SEBF8310 3000 SEBF8311 3000 SEBF8312 3000 SEBF8313 3000 SEBF8314 3100, 3250 SEBF8315 3100, 3250 SEBF8316 3100, 3250 SEBF8317 3100, 3250 SEBF8318 4050, 4200, 4250, 4300 SEBF8319 4050, 4200, 4250, 4300 SEBF8320 4050, 4200, 4250, 4300 SEBF8321 4050, 4200, 4250, 4300 SEBF8322 1250 SEBF8323 1250 SEBF8324 1250 SEBF8325 1250 SEBF8326 1250, 1253 SEBF8327 1250 SEBF8328 0000 SEBF8329 1000 SEBF8330 1201, 1304

Form No. SMCS Code SEBF8331 1000 SEBF8332 3001 SEBF8333 0000 SEBF8334 4208 SEBF8335 1000 SEBF8336 1000 SEBF8337 1000 SEBF8338 1000 SEBF8339 1000 SEBF8340 1000, 1250 SEBF8342 3001, 4050 SEBF8343 1000 SEBF8344 1278, 1287 SEBF8345 0000 SEBF8346 1250, 1278 SEBF8347 1250, 1280 SEBF8348 1250, 1252, 1254 SEBF8349 0000 SEBF8350 0000 SEBF8351 4198 SEBF8352 1201 SEBF8353 1250 SEBF8354 0000 SEBF8355 0000 SEBF8356 0000 SEBF8357 0000 SEBF8358 0000 SEBF8359 0000



SEBF8360 0000 SEBF8361 0000 SEBF8362 0000 SEBF8363 0000 SEBF8364 0000 SEBF8366 4050 SEBF8367 0000 SEBF8368 0000 SEBF8370 4050 SEBF8371 1000 SEBF8372 0000 SEBF8373 1000, 1100 SEBF8374 1000, 1100 SEBF8375 1000, 1100 SEBF8376 1000, 1100

Form No. SMCS Code SEBF8377 1201, 1206 SEBF8378 1000, 1100 SEBF8379 1000, 1100 SEBF8380 1000, 1100 SEBF8381 1000, 1100 SEBF8382 1100 SEBF8383 0000 SEBF8384 0000 SEBF8385 0000 SEBF8386 1216 SEBF8387 1201 SEBF8388 0000 SEBF8389 0000 SEBF8390 0000 SEBF8391 0000 SEBF8392 0000 SEBF8393 0000 SEBF8394 0000 SEBF8395 0000 SEBF8396 0000 SEBF8397 0000 SEBF8398 0000 SEBF8399 0000 SEBF8400 0000 SEBF8401 7051, 7065 SEBF8403 4052 SEBF8404 3217, 5050, 5056, 5068, 5095,

7542, 7577 SEBF8405 1000 SEBF8406 1000 SEBF8407 1000 SEBF8408 1000 SEBF8409 1000 SEBF8410 1000 SEBF8413 1000 SEBF8414 1000 SEBF8415 1000 SEBF8416 1000 SEBF8417 1000 SEBF8418 1361 SEBF8419 4050, 4052 SEBF8420 4234, 4313, 5225 SEBF8421 7051

Form No. SMCS Code SEBF8422 1379 SEBF8423 1290 SEBF8424 1290 SEBF8425 1290 SEBF8426 1290 SEBF8431 1290 SEBF8432 1290 SEBF8427 1290 SEBF8429 1290 SEBF8430 1290 SEBF8433 1290 SEBF8434 1264 SEBF8435 1302 SEBF8436 5050 SEBF8437 1201 SEBF8438 3260, 3004, 4070 SEBF8440 0375, 0680 SEBF8442 1000 SEBF8443 4201, 4209



SEBF8444 4305 SEBF8445 3080-fi, 3177 SEBF8446 5095-fi, 5056 SEBF8447 5095, 5050 SEBF8448 0680 SEBF8451 1000 SEBF8452 3030, 3064, 3067, 3080, 3110,

3177 SEBF8453 5095, 7577, 7542 SEBF8454 3260, 3004, 4070 SEBF8455 7579, 0680, 0645 SEBF8456 5095 SEBF8457 5095, 7577, 7542 SEBF8458 3030, 3064, 3067, 3080, 3110,

3177 SEBF8459 3030, 3064, 3067, 3080, 3110,

3177 SEBF8460 3030, 3067, 3080 SEBF8461 3010, 3030, 3067, 3080 SEBF8462 3010, 3030, 3067, 3080, 3177 SEBF8463 3010, 3030, 3067, 3080, 3177 SEBF8464 3020, 3260, 3278, 3282, 4050,

4070 SEBF8465 3010, 3030, 3067, 3080, 3177 SEBF8466 5050 SEBF8467 6333, 6826 SEBF8468 6333, 6826 SEBF8469 6333, 6826

Form No. SMCS Code SEBF8470 5050 SEBF8472 5050 SEBF8474 0000 SEBF8476 6333, 6826 SEBF8477 0000 SEBF8478 6333, 6826 SEBF8479 1000 SEBF8481 3067, 3080, 3030 SEBF8482 1348, 3080, 4070, 4071, 5095 SEBF8483 2449, 2450, 2455, 2493, 2495,

4002, 4006, 4200, 4205, 4208, 4215, 4234, 7542, 7577

SEBF8484 3000, 3030, 5050 SEBF8485 5000, 5050 SEBF8486 2395, 3000, 3001, 3002, 3003,

3030, 3064, 3080, 3081, 7413, 7573, 7577

SEBF8487 7100 SEBF8488 5050 SEBF8489 5050, 5095, 5056, 5068, 7542,

7577 SEBF8490 2449, 2450, 2455, 2493, 2495,

4002, 4006, 4200, 4205, 4208, 4215, 4234

SEBF8493 5050, 5095, 5056, 5068, 7542, 7577

SEBF8494 5095 SEBF8496 5050 SEBF8497 5305 SEBF8703 5095, 5050 SEBF8706 5095, 5050 SEBF8716 5050 SEBF8717 0000 SEBF8718 0000 SEBF8719 0000 SEBF8720 0000 SEBF8721 0000 SEBF8722 0000 SEBF8723 0000 SEBF8724 4300, 5050, 4332, 7542SEBF8725 4300, 5050, 4332, 7542SEBF8791 3217, 5050, 5056, 5068, 5095,

7542, 7577 Form No. SMCS Code SEBF8802 5050, 5056, 5068, 5095, 3217,

7542, 7577 SEBF8803 5050, 5056, 5068, 5095, 3217,

7542, 7577 SEBF8804 0680 SEBF8805 5207 SEBF8806 3067, 5050, 5056, 5068, 5091,

5092, 5095, 7542, 7577SEBF8807 1000 SEBF8813 0000 SEBF8814 1210



SEBF8815 1210 SEBF8817 1000 SEBF8818 1201 SEBF8819 1000, 1100 SEBF8820 1254 SEBF8821 1214 SEBF8822 1105, 1108 SEBF8823 1209 SEBF8824 1156 SEBF8825 1205 SEBF8827 5050, 5102 SEBF8828 3217, 5050, 5056, 5068, 5095,

7542, 7577 SEBF8831 1000 SEBF8832 1000 SEBF8833 1000 SEBF8840 5050 SEBF8841 4050 SEBF8854 0000 SEBF8875 1201 SEBF8876 1221 SEBF8877 1000, 1100 SEBF8878 1201, 1217 SEBF8882 7003 SEBF8891 0000 SEBF8892 5050, 5102 SEBF8912 3279



Publications in SMCS Order

Information has been printed in other service publications during the last several years that can also be used in your Reusable Parts program. The index that follows gives you the literature abbreviation, the title of the article, form number, and date of publication, when necessary. The Guidelines For Reusable Parts (GRPTS) have also been included in this index to give you one complete reference source. For publications issued since the date of the Index, use the Service Information Retrieval System.

The definitions of the literature abbreviations used in this index are:

CC - Contamination Control Guidelines

CHRG - Cylinder Head Rebuild Guide

CHS - Custom Hydraulic Service

CRC Custom Rebuild Center

ECRB - Engine & Component Reconditioning Bulletin

EN - Engine News

LTTB - Lift Truck Technical Bulletin

GRPTS - Guideline for Reusable Parts

GPU Guideline for Product Update

SI - Special Instruction

SM - Service Magazine

SPPUB - Special Publication

SRVMA - Service Manual

TP - Technical Partsgram

URG - Undercarriage Reconditioning

Guide

TA - Tool Announcement

TOM - Tool Operating Manual

The index is arranged numerically by Service Management Control System (SMCS) code number. For a list of the SMCS codes, refer to SEBD3456, "Code Structure for the Service Management Control System" and SEBF3017, "Classification Codes for Service Literature".

The publications listed are available through Corporate Literature with the exception of Service Magazine articles having a publication date of one year or older. Those publications are available in microfiche.

The following is a list of Guidelines For Reusable Parts published as of July 13, 2004 and other publications printed as of July 13, 2004.

SMCS Code

Publication Title Form No. Date

GENERAL 0000 CHS Excavators and Custom Hydraulic Service Reference

Specifications RENR1193-01 Feb. 2001

20000 GRPTS Index of Publications on Reusability or Salvage of Used Parts

SEBF8029-29 July 2004

0000 GRPTS Components for 3600 Family of Engines SEBF8100-03 June 19930000 GRPTS General Salvage and Reconditioning Techniques SEBF8148 May 19900000 GRPTS Standardized Parts Marking Procedures SEBF8187-01 May 19980000 GRPTS Excavator Inspection SEBF8292-04 Feb. 20040000 CHS Backhoe Loader Inspection SEBF8328-06 Mar. 20040000 CHS Backhoe Loaders SOS Sampling Valve and Filter Cart

Installation Procedure SEBF8333 June 1997

0000 CHS 938-980 Wheel Loaders Inspection SEBF8345-03 Feb. 20040000 CHS CHS Inspection Specifications for Excavators SEBF8349 Oct. 19970000 CHS CHS Inspection Specifications for Backhoe Loaders SEBF8350-02 Mar. 20040000 GRPTS Cleaning Guide Equipment & Chemical Recommendations

Reference ManualSEBF8354 May 1998

0000 GRPTS Cleaning Guide Equipment & Chemical Recommendations Contents Page

SEBF8355-02 July 2000

0000 GRPTS Introduction to the Cleaning Guide SEBF8356 May 19980000 GRPTS General Cleaning Methods SEBF8357 May 19980000 GRPTS Initial Cleaning Area SEBF8358 May 19980000 GRPTS Main Shop SEBF8359 May 19980000 GRPTS Spec Shop SEBF8360 May 19980000 GRPTS Track Shop SEBF8361 May 19980000 GRPTS Truck Shop SEBF8362 May 19980000 GRPTS Examples of Parts Cleaning Racks and Baskets SEBF8363 May 19980000 GRPTS Cleaning Guide Equipment & Chemical Recommendations

Binder SEBF8364 May 1998

0000 CHS CHS Inspection Specifications Guideline Index SEBF8367-04 Dec. 200220000 CHS CHS Inspection Specifications Guideline Contents Page SEBF8368-10 June 2004 0000 CHS CHS Inspection Specifications for Wheel Loaders SEBF8372-03 Feb. 2004



0000 CHS Off-Highway Truck Inspection SEBF8383-02 Feb. 20040000 CHS Cleaning Guideline Equipment & Chemical

Recommendations Index SEBF8384-01 July 2002

0000 GRPTS Dealer Spec Shop Concepts Binder SEBF8385 Aug. 19980000 CHS CHS Inspection Reference for Off-Highway Trucks SEBF8388-02 Feb. 20040000 GRPTS Cylinder Head Racks SEBF8389 Aug. 19980000 GRPTS Hardware Containers SEBF8390 Aug. 19980000 GRPTS Engine Component Racks SEBF8391 Aug. 19980000 GRPTS Engine Stands SEBF8392 Aug. 19980000 GRPTS Hardware Carts SEBF8393 Aug. 19980000 GRPTS Parts Cabinets SEBF8394 Aug. 19980000 GRPTS Engine Dyno Room SEBF8395 Aug. 19980000 GRPTS Cylinder Head Area SEBF8396 Aug. 19980000 GRPTS Special Tools SEBF8397 Aug. 19980000 GRPTS Dealer Spec Shop Concepts Reference Manual SEBF8398 Aug. 19981New publications printed as of July 13, 2004. 2Revisions of original publications as of July 13, 2004. SMCS Code

Publication

Title

Form No.

Date

0000 GRPTS Dealer Spec Shop Concepts Reference Manual Contents Page

SEBF8399-01 May 2002

0000 CHS Front Shovels Inspection SEBF8400 July 199920000 GRPTS Hydrualic Hammer Reuse and Salvage Manual Contents

Page SEBF8474-02 June 2004

0000 GRPTS Hose & Coupling Assembler Training Manual Introduction SEBF8717 May, 20020000 GRPTS Hose Identification SEBF8718 May, 20020000 GRPTS Coupling Identification SEBF8719 May, 20020000 GRPTS Hose Assembly Identification SEBF8720 May, 20020000 GRPTS Contamination Control SEBF8721 May, 20020000 GRPTS Tooling and Quality Inspection SEBF8722 May, 20020000 SM Major Improvements To D9L Tractors SEBD1557 Mar.19850000 SPPUB Metal Spray Guide SEBF2000 May 19890000 SPPUB Ultrasonics Guide SEBF2700 May 19890000 CHS Custom Hydraulic Service Inspection Form CD SERF8411 Apr. 19990000 CRC Component Rebuild Center (CRC) Development Guide CD SEBF8813 Feb. 200310000 GRPTS 797 Off Highway Truck Reuse and Salvage Index SEBF8891 Feb. 2004 0160 SM Use Again Maximum SEBD1520 Aug. 29,

19750160 SM A Comparison Of "Use Again Maximum" And "Maximum

Permissible Wear" SEBD1531 Dec. 17,

19750350 SM Do Not Weld On Painted Surface SEBD1556 Mar. 4,

19850353 SM Prevent Skin Irritation From Petroleum Test Fluids SEBD1569 June 3,

19850353 SM Service Parts Containing Asbestos Are Now Labeled SEBD1671 June 30,

19860353 SM Lists For Parts With Hazardous Chemicals SEBD1674 July 26,

19860355 7000

SI Storage Procedure For Caterpillar Products - All Applications (Replaces both SEHS7392 and SEHS7864)

SEHS9031-03 Oct 1997

0374 SI Transmission Overhaul Estimator Guide SEHS9048 Feb. 19910374 SM Caterpillar Remanufacturing Programs SEBD1005 Feb. 4,

19800374 SM Caterpillar Remanufactured Products Catalog Is Now

Available SEBD1022 June 23,

19800374 SM Additions To Reference Chart For Major Production

Changes SEBD1550 Jan. 14,

19850375 0680

CC Cleaning Caterpillar Asphalt Pavers SEBF8440-01 September 2000

0600 SI Installation Of Replacement Track Roller/Idler Bearings SEHS8707-02 July 19920600 SM New Temperature Labels Available SEBD1553 Feb. 4,

1985



SMCS Code

Publication

Title

Form No.

Date

0600 SM Installation Of Heli-Coils In Holes With Damaged Threads SEBD1558 Mar. 11, 1985

0600 SM Tools Added To 6V-9413 CTS Kit SEBD1561 April 1, 1985

0600 SM Air To Air Aftercooler Test Group Available SEBD1656 Feb. 24, 1986

SM List Of Special Tools For RayGo Produced Machines Offered By Caterpillar

SEBD1656 Feb. 24, 1986



0600 0600 SM Parts And Service Tools Available For Repairing Track

Rollers SEBD1750 Jan. 5, 1987

0600 SM New 8T-9289 Adjustable Spanner Wrench Available D10 Tractors, Articulated Dump Trucks

SEBD1764 May 4, 1987

0600 SM New Air Powered Scraper Available For Gasket Removal SEBD1790 Nov. 16, 1987

0600 TOM Operating Manual. Welding Group 1U-9600 (USA and Canada) 1U-9601 (all other countries)

NEHS0513-04 Oct. 1996

0600 0602 0615

SM Special Service Tools Available All D8N, D10N And D11N Tractors

SEBD1786 Oct. 19, 1987

0601 0646 0722 0770

SM Several New Tools Available To Help Service, 785 and 789 Trucks

SEBD1851 Jan. 25, 1988

0610 SM Identification Of Exchange Or Reconditioned Components SEBD1303 Jan. 23, 1983

0610 SM Use Pneumatic Tool To Remove Gaskets, Sealants, Paints SEBD1311 April 18, 1983

0613 1400

SI Use of 6V-3000 Sure Seal Repair Kit SMHS7531-01 June 1988

0622 SI Using 2P-5535 and 5P-0250 Stud Remover Groups (was GMGO2078)

SMHS8391 Nov. 1983

0622 SM 6V-2010 "Arkansas" Polishing Stone SEBD1923 June 25, 1979

0623 SI Use of the 5P-4800 Swaging Tool Assembly SEHS6823-02 Dec. 19880645 SM New Rust Preventative Used In Parts Distribution System SEBD1570 June 10,

19850645 SM The Multi-Purpose Cleaners That Do It All (NACD Only) SEBD1667 June 2,

19860645 0680 7579

CC Procedure for Filtering Track-Type Tractor (D3-D6) Hydraulic Oil

SEBF8455-02 Mar. 2004

0650 SI Bore Scopes (replaces SEHS8426) NEHS0504-04 Feb. 20010651 SI Using the 6V-6030 Size Setting Fixture Group SMHS8036 June 19820651 SI Using the 6V-6000 Dial Bore Gauge Group SMHS8037 May 19820651 SM Use Heat Indication Products to Measure Parts

Temperatures SEBD1113 Apr 6, 1981

0651 SM 6V-6059 Microlite Available for 6V-2196 Inspection Microscope

SEBD1210 Mar. 15, 1982

1New publications printed as of July 13, 2004. 2Revisions of original publications as of July 13, 2004.



SMCS Code

Publication

Title

Form No.

Date

0653 SM 6V-2196 Microscope Available for Inspection Purposes SEBD1026 Aug. 11, 1980

0653 SM Instruction Cards for "Go-No Go" Gauges Now Available SEBD1120 May 25, 1981

0663 SI Using Hydraulic Boring Machines SEHS8171-01 June 1, 1990

0670 SM Removal of TARP (Rust Preventive) SEBD1317 June 6, 1983

0670 SM Use Caution When Handling Components That Contain Asbestos

SEBD1473 July 16, 1984

0670 SM Tools for Gasket Removal and Surface Reconditioning SEBD1926 Aug. 6, 1979

0670 SM Size of Glass Beads is Important When Used to Clean Engine and Turbocharger Parts (Also, EN, November 28, 1979)

SEBD1937 Oct. 22, 1979

0672 SI Using the 1U-8660 Boring Bar Hydraulic Unit and Attachments

SEHS8985 Sep. 1990

0674 SM List Of Metal Surface Reconditioning Products Available From Caterpillar

SEBD1665 May 19, 1986

0674 SM Additional Metal Surface Reconditioning Products Available From Caterpillar

SEBD1752 Jan. 26, 1987

0675 SM 6V-0083 Emery Polishing Paper (Grade 4/0) SEBD1902 Jan. 15, 1979

0675 SI Procedure to Use SCOTCH-BRITE Brushes and Wheels SMHS8090 Dec. 19820679 0751

GPU Application of Abrasion-Resistant Material SEBF8782 Aug. 2002

0680 GRPTS Cleaning Components With Carbon Dioxide (CO2) SEBF8804 Dec. 2002 20680 CC Procedure for Adding Filter Capability to Solvent Stands SEBF8448-02 June 2004 0680 0375

CC Cleaning Caterpillar Asphalt Pavers SEBF8440-01 September 2000

0680 0645 7579

CC Procedure for Filtering Track-Type Tractor (D3-D6) Hydraulic Oil

SEBF8455-02 Mar. 2004

0700 4050

SM Four New Sizes Of Three-Jaw Pullers Available SEBD1788 Nov. 2, 1987

0717 SM New 1U-5771 Adapter Assembly Available To Install Sprocket D6C, D6D Tractors

SEBD1851 Jan. 25, 1988

0717 SM New 1U-7432 Adapter Available To Assist In Removal Of Transmission Bevel Gear Module. D6H, D7H, D8N Tractors With Differential Steering

SEBD1851 Jan. 25, 1988

0721 SM New Fabricated Tool Drawings SEBD1674 July 28, 1986

0729 SM Training Material And Tooling Available For Servicing Positive Pin Retention Track. D9L, D9N, D10, D10N, D11N Tractors

SEBD1873 July 11, 1988

0729 SM Track Bushing Groove Gauges Available SEBD1583 Sept. 30, 1985

0738 SI Using 7S-1100 Hydraulic Press Arrangement SEHS6880-04 April 19910738 5057

SI Use of 4C-9900 Hydraulic Hose Service Press SEHS7957-06 July 1996



SMCS Code

Publication

Title

Form No.

Date

0755 SM Major Improvement And Service Information For 615 Tractor-Scrapers

SEBD1681 Oct. 1, 1986

0755 3154 7051

SI Using the 8T-0925 and 8T-2845 Tube Expander Tool Groups D8L (4FB, 53Y); D9L (14Y); D10 (84W, 76X)

SEHS8467-01 Aug. 1989

0764 SI Use of 8T-450 Thread Identification Kit SEHS8429 Jan. 19840767 TOM Instructions for 1U-9801 Ultrasonic Wear Indicator Program

Module Replacement (Operating Manual)NEHS0536 June 1990

0770 SI 8T-0820 Pressure Gauge Service/Repair SEHS9419 Dec. 19910776 SM New Temperature Recorder Group (Crayon) Indicates

Surface Temperature SEBD1567 May 20,

19850781 1000

SI Use Of The 4C-3502 Engine Repair Indicator Kit SEHS9037 Feb. 1989

0782 SI Use of 5P-4150 Nozzle Testing Group - Capsule Fuel Valves; Pencil-Type Fuel Nozzles, Caterpillar Direct Injection Fuel Nozzles

SEHS7292-10 June 2004

0782 SI Test Sequence: Capsule-Type Fuel Nozzles SEHS7350-05 Oct. 19940782 1290

SI Using the 6V-4022 Injector Tester to Test 1.1 Liter Fuel Injectors

SEHS8858 June 1991

0782 1290

SI Unit Injector Test Specifications for 1.1 Liter Engines, 1.7 Liter Engines and 3500 Family Engines

SEHS8884-04 May 1995

0783 3012

SI Service Information and Use of the 1U-7446 Transmission Shift Analyzer Group - All Transmissions Shifted by Electronic Control

SEHS9084 Aug. 1990

ENGINE (GENERAL) 1000 GRPTS 3516 Engine Assembly Procedure Wall Chart RENR1935 Jan. 19991000 GRPTS 3512 Engine Assembly Procedure Wall Chart RENR3731 Sept. 19991000 GRPTS Reconditioning Procedures 3114 and 3116 Engines SEBF8167-03 Mar. 200221000 GRPTS 3500 Engine and Component Reuse and Salvage Index SEBF8169-13 May 2004 1000 GRPTS Recommendations for Cleaning and Inspecting

Components3600 Family of Engines SEBF8171 Jan. 1992

1000 GRPTS 3500 Engine Reference Manual Contents Page (SEBF8205) SEBF8203-21 Mar. 20041000 GRPTS Label for 3500 Engine Reference Manual Binder

(SEBF8234) SEBF8204 April 1994

1000 GRPTS Reference Manual 3500 Engines Salvage and Reuse Guides SEBF8205 Dec. 19931000 GRPTS 3116 and 3126 Engine Reference Manual (SEBF8211)

Contents Page SEBF8209-17 Apr. 2004

1000 GRPTS Label for 3116 and 3126 Engine Reference Manual Binder (SEBF8234)

SEBF8210-01 Jan. 1998

1000 GRPTS Reference Manual 3116 and 3126 Engines Salvage and Reuse Guides

SEBF8211 Dec. 1993

21000 GRPTS 3116 Engine and Component Reuse and Salvage Index SEBF8212-09 June 2004 1000 GRPTS Overhaul Check List 3500 Family of Engines SEBF8213-01 Nov. 19971000 GRPTS Reference Manual 3176 Engines Salvage and Reuse Guides SEBF8214 Dec. 19931000 GRPTS 3176 Engine Reference Manual Contents Page (SEBF8214) SEBF8215-13 Apr. 20041000 GRPTS Label for 3176 Engine Reference Manual Binder

(SEBF8214) SEBF8216 July 1994

21000 GRPTS 3176 Engine and Component Reuse and Salvage Index SEBF8217-09 June 2004 1000 1100

GRPTS Specifications for Cylinder Head Assemblies SEBF8218-03 Feb. 2004

1New publications printed as of July 13, 2004. 2Revisions of original publications as of July 13, 2004.



SMCS Code

Publication

Title

Form No.

Date

1000 GRPTS Salvage of Cylinder Block Liner Bores 3500 Family of Engines

SEBF8219-02 July, 2002

1000 1100

GRPTS Specifications for Cylinder Head Assembly - 3176 Engines SEBF8229-06 Feb. 2004

1000 GRPTS Reference Manual 3200 Engine Salvage and Reuse Guides SEBF8230 April 19941000 GRPTS 3200 Engine Reference Manual Contents Page (SEBF8230) SEBF8231-13 Apr. 20041000 GRPTS Label for 3200 Engine Reference Manual Binder


21000 GRPTS 3200 Engine and Component Reuse and Salvage Index SEBF8233-09 June 2004 1000 GRPTS Reference Manual 3300 Engine Salvage and Reuse Guide SEBF8234 April 19941000 GRPTS 3300 Engine Reference Manual Contents Page (SEBF8234) SEBF8235-12 Apr. 20041000 GRPTS Label for 3300 Engine Reference Manual Binder


21000 GRPTS 3300 Engine Component Reuse and Salvage Index SEBF8237-09 June 2004 1000 GRPTS Reference Manual 3400 Engine Salvage and Reuse Guides SEBF8238 April 19941000 GRPTS 3400 Engine Reference Manual Contents Page (SEBF8238) SEBF8239-16 Apr. 20041000 GRPTS Label for 3400 Engine Reference Manual Binder


21000 GRPTS 3400 Engine and Component Reuse and Salvage Index SEBF8241-11 June 2004 1000 GRPTS Truck Engine Reuse and Salvage Guide SEBF8248 Sept. 19941000 GRPTS Label for Truck Engine Reference Manual Binder

(SEBF8248) SEBF8249 Sept. 1994

1000 GRPTS Truck Engine Reference Manual Contents Page (SEBF8248)

SEBF8250-12 Apr. 2004

1000 GRPTS Engine Updates for 793 and 793B Off-Highway Trucks SEBF8329-03 Jan. 20001000 GRPTS Engine Updates for 789 and 789B Off-Highway Trucks SEBF8331-02 Jan. 20001000 GRPTS Engine Updates for 777B and 777C Off-Highway Trucks SEBF8335-01 July 19991000 GRPTS Engine Updates for 785 and 785B Off-Highway Trucks and

784B Tractors SEBF8336-01 Aug. 1999

1000 GRPTS Engine Updates for 994 Wheel Loaders SEBF8337-01 Aug. 19991000 GRPTS Engine Updates for 5130 and 5230 Excavators SEBF8338-01 Aug. 19991000 GRPTS Engine Updates for D11 Track-Type Tractors SEBF8339-02 Feb. 20001000 GRPTS Fuel Systems Troubleshooting Guide for 3204, 3300, and

3400 Engines with New Scroll Fuel Systems (NSFS)SEBF8340 Dec. 1997

1000 GRPTS Fuel System Tooling List for 3000 Family of Engines SEBF8343-01 Jan. 19981000 GRPTS Salvage of Cylinder Block Liner Bores for 3400 Engines SEBF8371 Dec. 19971000 GRPTS 3500 Series Reuse and Salvage Manual Binder SEBF8406-01 July 20011000 GRPTS 3600 Series Reuse and Salvage Manual SEBF8407 Jan. 19991000 GRPTS 3600 Series Reuse and Salvage Manual Binder SEBF8408 Jan. 19991000 GRPTS 3600 Series Reuse and Salvage Manual Contents Page SEBF8409-08 Apr. 20041000 GRPTS 3600 Series Reuse and Salvage Manual Index SEBF8410-04 Nov. 20031000 GRPTS 3116/3126 Series Reuse and Salvage Manual Binder SEBF8413 June 19991000 GRPTS 3176 Series Reuse and Salvage Manual Binder SEBF8414 June 19991000 GRPTS 3200 Series Reuse and Salvage Manual Binder SEBF8415 June 19991000 GRPTS 3300 Series Reuse and Salvage Manual Binder SEBF8416 June 19991000 GRPTS 3400 Series Reuse and Salvage Manual Binder SEBF8417 June 1999



SMCS Code

Publication

Title

Form No.

Date

1000 SM Analyzing A Major Engine Failure SEBD1228 July 19, 1982

1000 SM Engine Rebuild Procedures for D346, D348 and D349 Engines (Supplements, Sept. 9, 1975, SM, October 27, 1980 SM)

SEBD1512 May 15, 1975

1000 SPPUB Successful Engine Service (3208 Engines) SEBD0509-01 Jan. 19781000 SPPUB Engine Bearings And Crankshafts SEBD0531 Nov. 19801000 SRVMA Reconditioning Procedures-4.5" Bore, V8 Direct Injection

Engines SENR2031 Aug. 1979

1000 CC Contamination Control of Rebuilt Engines by Using a Particle Counting Process

SEBF8442-02 Nov. 2001

1000 CC Kidney Loop Filtration Process for Rebuilt Engines SEBF8405-02 July 20011000 ECRB Engine Specialization Shop Standards SEBF8451 Oct. 20001000 GRPTS 3500 R&S Manual Contents Page Volume 2 SEBF8479-03 May 20041000 GRPTS 3054 and 3056 Engine Reuse and Salvage Manual Contents

Page SEBF8731-03 Apr. 2004

1000 GRPTS 3054 and 3056 Engine Reuse and Salvage Manual Index SEBF8732 Apr. 20031000 GRPTS 3054 and 3056 Engine Reuse and Salvage Manual Binder

only SEBF8733 Apr. 2003

1000 GRPTS Salvage of Cylinder Block Liner Bores for C-15 Engines SEBF8807 Feb. 20031000 GRPTS Specifications for Cylinder Liner Measurement and Salvage

in 3054 and 3065 Engines SEBF8817 Feb. 2003

1000 GRPTS 3054 and 3056 Series Reuse and Salvage Manual Contents Page

SEBF8831-05 Apr. 2004

1000 GRPTS 3054 and 3056 Series Reuse and Salvage Manual Index SEBF8832 Mar. 20031000 GRPTS 3054 and 3056 Series Reuse and Salvage Manual Binder

Only SEBF8833 Mar. 2003

1000 1100

GRPTS Reuse of Cylinder Heads on 3176 Engines with Injector Tip Damage

SEBF8262-02 Oct. 1996

1000 1100

GRPTS Specifications for Cylinder Head Assembly in 3406E Engines

SEBF8270-05 Feb 2000

1000 1100

GRPTS Specifications for Cylinder Head Assemblies 3400 Engines SEBF8373-02 Feb. 2004

1000 1100

GRPTS Specifications for Cylinder Head Assemblies 3200 Engines SEBF8374 July 1998

1000 1100

GRPTS Specifications for Cylinder Head Assemblies 3300 Engines SEBF8375-02 Feb. 2004

1000 1100

GRPTS Specifications for Cylinder Head Assemblies 1404 & D Model Engines

SEBF8376 July 1998

1000 1100

GRPTS Cylinder Head Reuse and Salvage Manual SEBF8378 July 1998

1000 1100

GRPTS Cylinder Head Reuse and Salvage Manual Contents Page SEBF8379-02 June 2000

1000 1100

GRPTS Cylinder Head R

Index Sebf8029

Documents

salvage procedure

reusable parts

salvage of used parts

torque converters sebf8006

torque converters sebf8012

highway trucks 1rehs2110

highway trucks sebf8001

torque dividers