^^ IEC Contactors SIRIUS 3RT10 3-Pole with AC Coil Selection Ordering Information >• 4-point AC Coil can be wired on top, bottom, or diagonally. >• Direct mount 3RU1 1 overload relays to create starters. *• Snap-on auxiliary contacts, surge suppressors, and timers. > Front and side mount auxiliary contacts available on 3RT102, 3RT103, 3RT1 04 versions. > 3RT1029A and 12A versions have extended electrical life compared to 3RT101 versions. >• Overload Relays see pages 254-265. > Accessories see pages 238-245. > Replacement Parts see page 882. >• Technical Data see pages 347. »• Dimensions see pages 369-376. Coil Voltage Codes** ACV 60Hz ACV 50Hz 24 24 120 110 208 208 240 220 277 480 BOO — Replace the ** in the contactor catalog a coil code from the table above. Code C2® K6 M2 PB U6 V6 T6 number with Illustration 3RT101 imp 3RT102 II 3RT103 3RT104 Enclosed Amp Ratings AC3 UL Single-Phase HP Ratings 115V 230V Three-Phase HP Ratings 200V 230V 460V 575V Auxiliary Contacts NO NC Screw Terminals Catalog No Price $ Cage Clamp Terminals Catalog No Price $ 3RT101 7 9 12 20 20 20 '/« 'A '/? 3 A 1 2 1'/z 2 3 2 3 3 3 5 7/7 5 7/2 10 1 — 1 1 — 1 — 1 — 1 3RT1015-1A**1 3RT1015-1A**2 3RT1016-1A**1 3RT1016-1A**2 3RT1017-1A**! 3RT1017-1A**2 55. 72. 89. 3RT1015-2A**! 3RT1015-2A**2 3RT1016-2A**! 3RT1016-2A**2 3RT1017-2A**! 3RT1017-2A**2 60. 77. 94. 3RT102 9 12 17 25 35 35 35 35 'A '/2 1 2 1 2 3 3 2 3 5 7/2 3 3 5 7/2 5 7/i 10 15 7/2 10 15 20 — — — — — — 3RT1023-1A**0 3RT1024-1A**0 3RT1025-1A**0 3RT1026-1A**0 81. 105. 121. 136. 3RT1023-3A**0 3RT1024-3A-0 3RT1025-3A**0 3RT1026-3A**0 84. 108. 124. 139. 3RT103 28 32 40 50 35 45 55 50 2 2 3 3 5 5 7/2 10 7A 10 10 15 10 10 15 15 20 25 30 40 25 30 40 50 — — — — — — — — 3RT1033-1A**0 3RT1034-1A**0 3RT1035-1A"0 3RTT036-1A**0 156. 172. 191. 206. 3RT1033-3A"0 3RT1034-3A**0 3RT1035-3A**0 3RT1036-3A**0 159. 175. 194. 209. 3RT104 65 80 95 90 105 105 5 7/2 10 15 15 — 20 25 30 25 30 30 50 60 75 60 75 100 — — — — — 3RT1044-1A**0 3RT1045-1A**fl 3RT1046-1A**0 291. 331. 453. 3RT1044-3A**0 3RT1045-3A**0 3RT1046-3A**0 294. 334. 456. o o o ®For3RT101 use BO. Discount Code: SIRIUS 3R Contactors, OL's, MSP's Siemens Industrial Control Products
3
Embed
IEC Contactors Selection - Amazon S3 · 2015. 7. 14. · IEC Contactors SIRIUS 3RT10 3-Pole with AC Coil Selection Ordering Information >• 4-point AC Coil can be wired on top, bottom,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
^^
IEC ContactorsSIRIUS 3RT10 3-Pole with AC Coil
Selection
Ordering Information
>• 4-point AC Coil can be wired on top, bottom, or diagonally.
>• Direct mount 3RU1 1 overload relays to create starters.
*• Snap-on auxiliary contacts, surge suppressors, and timers.
> Front and side mount auxiliary contacts available on 3RT102, 3RT103, 3RT1 04 versions.
> 3RT1029A and 12A versions have extended electrical life compared to 3RT101 versions.
>• Overload Relays see pages 254-265.
> Accessories see pages 238-245.
> Replacement Parts see page 882.
>• Technical Data see pages 347.
»• Dimensions see pages 369-376.
Coil Voltage Codes**
ACV 60Hz ACV 50Hz
24 24120 110208 208240 220277480BOO —
Replace the ** in the contactor cataloga coil code from the table above.
Code
C2®K6
M2PBU6V6T6
number with
Illustration
3RT101
imp3RT102
II3RT103
3RT104
EnclosedAmp Ratings
AC3 UL
Single-PhaseHP Ratings
115V 230V
Three-Phase HP Ratings
200V 230V 460V 575V
AuxiliaryContacts
NO NC
Screw Terminals
Catalog No Price $
Cage Clamp Terminals
Catalog No Price $
3RT101
7
9
12
20
20
20
'/«
'A
'/?
3A
1
2
1'/z
2
3
2
3
3
3
5
7/7
5
7/2
10
1
—
1
1
—
1
—
1
—
1
3RT1015-1A**1
3RT1015-1A**2
3RT1016-1A**1
3RT1016-1A**2
3RT1017-1A**!
3RT1017-1A**2
55.
72.
89.
3RT1015-2A**!
3RT1015-2A**2
3RT1016-2A**!
3RT1016-2A**2
3RT1017-2A**!
3RT1017-2A**2
60.
77.
94.
3RT102
9
12
17
25
35
35
35
35
'A
'/2
1
2
1
2
3
3
2
3
5
7/2
3
3
5
7/2
5
7/i
10
15
7/2
10
15
20
—
—
—
—
—
—
3RT1023-1A**0
3RT1024-1A**0
3RT1025-1A**0
3RT1026-1A**0
81.
105.
121.
136.
3RT1023-3A**0
3RT1024-3A-0
3RT1025-3A**0
3RT1026-3A**0
84.
108.
124.
139.
3RT103
28
32
40
50
35
45
55
50
2
2
3
3
5
5
7/210
7A
10
10
15
10
10
15
15
20
25
30
40
25
30
40
50
—
—
—
—
—
—
—
—
3RT1033-1A**0
3RT1034-1A**0
3RT1035-1A"0
3RTT036-1A**0
156.
172.
191.
206.
3RT1033-3A"0
3RT1034-3A**0
3RT1035-3A**0
3RT1036-3A**0
159.
175.
194.
209.
3RT104
65
80
95
90
105
105
5
7/2
10
15
15
—
20
25
30
25
30
30
50
60
75
60
75
100
—
—
—
—
—
3RT1044-1A**0
3RT1045-1A**fl
3RT1046-1A**0
291.
331.
453.
3RT1044-3A**0
3RT1045-3A**0
3RT1046-3A**0
294.
334.
456.
o
oo
®For3RT101 use BO.
Discount Code: SIRIUS 3R Contactors, OL's, MSP's
Siemens Industrial Control Products
IDO
'"O.Sa. to< o
General InformationNorth American Approvals
General
INSTALLATION CONSIDERATIONSThe control products described in this cata-log have been designed, tested and manu-factured in accordance with a wide variety ofstandards including but not limited to thoseissued by UL, CSA, NEMA and IEC. Thesestandards typically apply to the control prod-uct as a component and not the installationor use of the product. It is the responsibilityof the end user of the control product tomake sure each installation complies with allof the applicable safety requirements, laws,regulations, codes and standards (someexamples of which are the N.E.C., the C.E.C.
and OSHA regulations). Note that localauthorities may impose further jurisdictionover each installation. When in doubt, con-sult with the local inspection authorities.
Unless otherwise specified, the control prod-ucts described in this catalog are designedto operate under "usual service conditions"as defined in NEMA Standards Publication—Part ICS 1-108. Open type devices areintended for installation in enclosures thatprovide environmental protection as neededfor the specific application. See pages 14and 15 for definitions of the various enclo-sure types.
PERFORMANCE DATAWhere given in this catalog, performancedata should only be used as a guide to deter-mine the suitability of the product for anapplication. The data may be the result ofaccelerated testing or elevated stress levelsunder controlled conditions. The user musttake care in correlating this data to actualapplication or service conditions.
UL and CSA—File Numbers and GuideCard Numbers
Most control equipment listed in this catalog isdesigned, manufactured and tested in accor-dance with the relevant UL and CSA standardsas listed in the table below.
Siemens Brand DevicesDescription
3TH2Control Relays 3TH3
3TH8AC contactors, DC contactorsReversing StartersOverload relaysTerminal blocksManual Motor Controller 3VUStarters, Combination StartersPush buttonsLighting and Heating ContactorsMechanical Limit Switches
International StyleNorth American Style
Fast Bus Components/KitsModular Motor Controllers Type EModular Motor Controllers — Group InstallationUS Series StarterFraction Hp Starters, SMF, MMSSirius 3RT ContactorsSirius 3RV MSP — Group Installation
Type ESirius 3RU OverloadSirius 3RH RelaysSirius 3RP TimersMiniature Circuit Breakers- -5SXManual Motor Controllers — 3LDSirius 3RA Combination StartersSirius 3RA Reversing ContactorsSirius 3RA Fastbus Combo StartersSirius 3RB Solid State Overloads
Yes, in the auxiliary switch block as well as between basic unit and themounted auxiliary switch blocks The solid-state compatible auxiliarycontact blocks have no positively driven contacts.-25to+60°C-55 to +80°C
-13to+140°F-67 to +176°F
IP 20®, coil system IP 40
10/5 and 5/10
15/5 and 8/10
Contactor cross-sections
Screw connection Main conductor(1 or 2 conductor with box terminalconnections possible) (according to EN 50 027)
finely stranded with end sleevefinely stranded without end sleevestrandedsolidribbon cable (number x width x depth)AWG conductor connections,solid or strandedTightening torque
Terminal screwAuxiliary conductorsolid
finely stranded with end sleeveAWG conductor connections,solid or strandedTerminal screwsTightening torque
Cage Clamp connection Auxiliary conductor:(1 or 2 conductor solidconnections possible) finely stranded with end sleeve
finely stranded without end sleeveAWG conductor connections,solid or stranded
For conductor cross-sections < 1 mm2 an "insulation stop" has to be used, 3RT1916-4JA02.
Permissible mounting positionThe contactors are designed for operation on vertical mounting surface.
mm'mm2
mm2
mm2
mmAWG
Nm(in Ibs.)
mm2
mm2
AWG
Nm (in Ibs.)
mm2
mm2
mm2
AWG
Front terminalconnected
0.75 to 250.75 to 250 75 to 35 rflj-0.75 to 16 pi6 x 9 x 0.8 O1Bto 2 L^
3 to 4.5 (27 to 40)M6 (Posidrive 2)
2 x (0.5 to 1.5); 2 xmax. 2 x (0.75 to 4)2 x (0.5 to 1.5); 2 x2 X (18 to 14)
M3 (Posidrive 2)0.8 to 1.2 (7 to 10 3)
Back terminalconnected
0.75 to 250.75 to 250.75 to 35 Sfl0.75 to 16 i|
18 to 2 LLi
(0.75 to 2.5) ace. to IEC 947;
(0.75 to 2. 5)
Both terminalsconnected
max. 2 x 16max. 2 x 16 Sfmax. 2 x 25max. 2 x 16 P?2 x (6 x 9 x 0.8'-W-max. 2 x 2 <£J*
2 x (0.5 to 2.5)
2 x (0.5 to 1.5)
2 x (0.5 to 2.5)
2 x (18 to 14)
360' 22,5' 22,5'
/jSE-N "\\ /—I DC coil: inclination to the front up to 22.5°: coilTT.i.T7 \|/ZJ volt, tolerance changes to 0.85 to 1.1* Os
Short-circuit protection of the 3RT1034 to 3RT1036 contactors without overload relays for export applications
Contactor Type 3RT1 033/34 3RT1035
Main circuitFuses, utilization category gL/gG NH Type 3NA
DIAZED Type 5SBNEOZED Type 5SE
With fuses- according to IEC 947-4/DIN VDE 0660 Part 1 02 Type of coord. "1 "®
Type of coord. "2"®AA
12563
12563
Auxiliary circuitFuses, utilization category gL/gG DIAZED Type 5SB(weld-free protection at /k> 1kA) NEOZEO Type 5SEor miniature circuit breaker with C-characteristic (short circuit current 1^ < 400A)
With fusesNEOZED, DIAZED gL/gGWith miniature circuit-breaker
Part 102:Type of coordination "1": Destruction of contactor andoverload relay is permissible. Contactor and/oroverload relay must be replaced, if necessary.Type of coordination "2": No damage can be toleratedon the overload relay, but contact welding on thecontactor is permitted if the contacts can easilybe separated.