IEC 61238-1 (Classe A) ANSI C119 - pimcore.sicame.fr

UID : 213 | TID :2122 :: 01/01/1970| SID : :: 01/01/1970 | Issued :01/24/2022 11:37:46 pm Last Modification : 12/23/2021

StandardsIEC 61238-1 (Classe A) ANSI C119.4

Capacity (mm²) Alu/Cu

Ref. Item code Bolt Ø (mm) W Ø i Ø e L Ep.

Screw

_ _ ML 20/0-8 XXXXXXX 9 _ 10 18 50 _ 1 13

_ _ ML20/0-10 XXXXXXX 11 _ 10 18 50 _ 1 13

25 95 ML 201-12 7601660 13 25 13 25 55 8 1 13

70 150 ML 202-12 7601665 13 30 15.5 30 80 10 2 17

_ _ ML 20/2-16 XXXXXXX 17 _ 15.5 30 80 _ 2 17

_ _ ML 20/3-10 XXXXXXX 11 _ 20.8 36 90 _ 2 17

120 240 ML 203-12 7601670 13 34 20.8 36 90 14 2 17

_ _ ML 20/3-16 XXXXXXX 17 _ 20.8 36 97 _ 2 17

  ML 20 ... Mechanical termination Lugs Description :  Mechanical termination lugs for connection of underground cables up to 42kV.

• Lugs to be used for aluminium or copper circular stranded cables (XLPE cables).

• Tightening of shear head screws, with a standard socket, manually or with an impact gun.

• The shear head breaking off will ever stay occur in the lug volume (not standing more than 1,5 mm).

• Centred bore. Tapered edge.• Tinned aluminium alloy body and aluminium alloy screws.• Reduced sizes, especially adapted to heat shrink and cold shrink

terminations.

Network Type : MV-LV  

Mini (mm²)

Maxi (mm²) Number

H sur plats (mm)

UID : 213 | TID :2122 :: 01/01/1970| SID : :: 01/01/1970 | Issued :01/24/2022 11:37:46 pm Last Modification : 12/23/2021

StandardsIEC 61238-1 (Classe A) ANSI C119.4

Capacity (mm²) Alu/Cu

Ref. Item code Bolt Ø (mm) W Ø i Ø e L Ep.

Screw

_ _ ML 20/3D-16 XXXXXXX 17 _ 20.8 36 97 _ 2 17

_ _ ML 20/3D-12 8969594 13 _ 20.8 36 97 _ 2 17

_ _ ML 20/3D1-12 XXXXXXX 13 _ 20.8 36 97 _ 2 17

_ _ ML20/3D1-16 XXXXXXX 17 _ 20.8 36 97 _ 2 17

_ _ ML 20/3DS-12 XXXXXXX 13 _ 20.8 36 97 _ 2 17

_ _ ML 20/3DS-16 XXXXXXX 17 _ 20.8 36 97 _ 2 17

_ _ ML 20/3.5-12 XXXXXXX 13 _ 23 38 97 _ 2 22

185 300 ML 2035-16 7601675 17 38 23 38 140 14 2 22

_ _ ML 20/4-12 XXXXXXX 13 _ 23 42 140 _ 3 22

240 400 ML 204-16 7601680 17 42 26 42 145 14 3 22

_ _ ML 20/4-18 XXXXXXX 19 _ 26 42 170 _ 3 22

_ _ ML 20/4-20 XXXXXXX 21 _ 26 42 170 _ 3 22

_ _ ML 20/5-12 XXXXXXX 13 _ 33 50 200 _ 3 22

_ _ ML 20/5-16 XXXXXXX 17 _ 33 50 200 _ 3 22

_ _ ML 20/5-18 XXXXXXX 19 _ 33 50 200 _ 3 22

_ _ ML 20/5-20 XXXXXXX 21 _ 33 50 200 _ 3 22

(*) Conductor has to be pressed round

Mini (mm²)

Maxi (mm²) Number

H sur plats (mm)