Idware Remote Site Monitoring Solution idware
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Microsoft PowerPoint - IDWARE Remote Site Monitoring Solution
20120921idware
2
TOPIC
1. Why a Remote Site Monitoring solution is mandatory for a TELCO?
2. Remote Site Monitoring features
a) Power monitoring b) Security Monitoring c) Environment Monitoring d) Equipment Monitoring
3. Remote Site Monitoring Solution
a) Technical solution b) Connectivity c) TIMOS Site Management Software d) Sensors
3
THE AIM
Almost all the BTS sites are remote and unstaffed.
To face this fact in a high competition context, Telco’s must:
Reduce OPEX
Optimize CAPEX
Protect investments
Increase revenues
4
IDWARE SOLUTION
HELPS YOU
By optimizing Time Before Repair
With a highest up type of QoS
By preventing failures
To protect investments from malicious intrusion and theft
By site controlled access
By watching cables, solar panels, …
from bad operation condition, thanks to a real time environment monitoring
Temperature & humidity
To reduce OPEX With less “truck rolls”
With less inefficient visits
With less scheduled visits
maintenance staff management
With a smart power management
Mains, Solar, Fuel generator
Extending battery life cycle
5
SITE MONITORING
POWER MONITORING
Total Real Power
Total Real Power
Tension
Current
4 thresholds
Very low
SECURITY MONITORING
• ACCES CONTROL
• INTRUSION
Door-Windows sensor kit
Video clip recording
• FUEL THEFT
Tank lid
• FOR EACH ALARM
ENVIRONMENT MONITORING
• TEMPERATURE SENSOR
• WATER SENSOR
• AIR-FLOW SENSOR
Combined with the AC detector,
it determines the origin of the AC failure
• FOR EACH MEASUREMENT
ONE OR MORE ACTIONS
EQUIPMENT MONITORING
• FUEL GENERATOR
remote monitoring option
Measurement
Web Configurable
HTTP compatible
through SiteBoss
(mains, fuel, solar, wind, batteries)
could get advantage of a smart power
management, saving costs and extending
equipment life. A script, based on
measurements and defined thresholds
must be written belongs requirements.
EQUIPMENT HAVING REMOTE MONITORING FEATURES
Any device which has an Internet or a serial port, using a standard protocol (TCP, MODBUS, …)
could be integrated into the global remote monitoring system.
Just a script, based on the manufacturer specifications, must be written.
10
IDWARE SOLUTION
A full range of connectivity with NOC & staff on the field Wire and wireless Networks
• INTRANET (LAN, VLAN)
Open for customization
• SNMP
• TCP
• FTP
• SiteBoss 450
• SiteBoss 550
• SiteBoss 571
Scripting capabilities
• 3-Phases AC
CONNECTIVITY
12
SITEBOSS WEB CONFIGURATOR
TIMOS SITE MANAGER
3-PHASE AC MONITORING
EQUIPMENT REMOTE
ON/OFF SWITCHING
SiteBoss 450
TM
Security: local or using RADIUS, VLAN, …
Scripting to combine different events for a better default understanding
TIMOS Site Manager to manage the whole network (powerful, modular, open, easy to use)
Connectivity
External: 1 Ethernet, 1 GPRS-EDGE (optional)
Internal: 1 Ethernet, 2 Serial RS232 - RS 485, 4 EventSensor ports to extend connectivity
2 Versions
Version 1 : Contact expansion
10 C (10 contact)
Version 2 : Mixed expansion
4 C (contact); 2 V (Analog voltage), 1 M (analog current), 3 R ( relays )
2 Options
Option 1 : EDGE modem internal expansion card
Option 2 : -48 V DC power supply & output voltages, +24, +15, -15 and +12 Volts DC
17
SiteBoss 550
6 expansion card slots
Various I/O expansion cards
EDGE or ADSL modem options
Monitor up to 1000 serial alarm messages
LUA Scripting language
Access network devices via dialup PPP
Fallback to dialup alarms if the Ethernet
connection fails
Management System
Optional internal run-time battery backup
VLAN support
18
SiteBoss 571
TM
Security: local or using RADIUS, VLAN, …
Scripting to combine different events for a better default understanding
Compatible with any SNMP element manager (NAGIOS, HP OV, TIMOS, …)
Complete connectivity with I/O
Contact closure, Serial RS232 - RS 485, analog (DC current and voltage)
Ethernet, ADSL, GPRS-EDGE
Smart Power Distribution Unit – High power relays (500 W)
DC Re-Boot, Load-Shedding upon event (Main Power Loss), “Graceful” Power-up
Optional AISG controller – Antenna Tilt
19
AC Current
3-PHASE AC POWER
SECURITY
Siren, Indoor Siren/Strobe
Temperature/Humidity Sensor
Indoor or Outdoor Use
For more information, please contact
CONTACT
INFORMATION
idware
2
TOPIC
1. Why a Remote Site Monitoring solution is mandatory for a TELCO?
2. Remote Site Monitoring features
a) Power monitoring b) Security Monitoring c) Environment Monitoring d) Equipment Monitoring
3. Remote Site Monitoring Solution
a) Technical solution b) Connectivity c) TIMOS Site Management Software d) Sensors
3
THE AIM
Almost all the BTS sites are remote and unstaffed.
To face this fact in a high competition context, Telco’s must:
Reduce OPEX
Optimize CAPEX
Protect investments
Increase revenues
4
IDWARE SOLUTION
HELPS YOU
By optimizing Time Before Repair
With a highest up type of QoS
By preventing failures
To protect investments from malicious intrusion and theft
By site controlled access
By watching cables, solar panels, …
from bad operation condition, thanks to a real time environment monitoring
Temperature & humidity
To reduce OPEX With less “truck rolls”
With less inefficient visits
With less scheduled visits
maintenance staff management
With a smart power management
Mains, Solar, Fuel generator
Extending battery life cycle
5
SITE MONITORING
POWER MONITORING
Total Real Power
Total Real Power
Tension
Current
4 thresholds
Very low
SECURITY MONITORING
• ACCES CONTROL
• INTRUSION
Door-Windows sensor kit
Video clip recording
• FUEL THEFT
Tank lid
• FOR EACH ALARM
ENVIRONMENT MONITORING
• TEMPERATURE SENSOR
• WATER SENSOR
• AIR-FLOW SENSOR
Combined with the AC detector,
it determines the origin of the AC failure
• FOR EACH MEASUREMENT
ONE OR MORE ACTIONS
EQUIPMENT MONITORING
• FUEL GENERATOR
remote monitoring option
Measurement
Web Configurable
HTTP compatible
through SiteBoss
(mains, fuel, solar, wind, batteries)
could get advantage of a smart power
management, saving costs and extending
equipment life. A script, based on
measurements and defined thresholds
must be written belongs requirements.
EQUIPMENT HAVING REMOTE MONITORING FEATURES
Any device which has an Internet or a serial port, using a standard protocol (TCP, MODBUS, …)
could be integrated into the global remote monitoring system.
Just a script, based on the manufacturer specifications, must be written.
10
IDWARE SOLUTION
A full range of connectivity with NOC & staff on the field Wire and wireless Networks
• INTRANET (LAN, VLAN)
Open for customization
• SNMP
• TCP
• FTP
• SiteBoss 450
• SiteBoss 550
• SiteBoss 571
Scripting capabilities
• 3-Phases AC
CONNECTIVITY
12
SITEBOSS WEB CONFIGURATOR
TIMOS SITE MANAGER
3-PHASE AC MONITORING
EQUIPMENT REMOTE
ON/OFF SWITCHING
SiteBoss 450
TM
Security: local or using RADIUS, VLAN, …
Scripting to combine different events for a better default understanding
TIMOS Site Manager to manage the whole network (powerful, modular, open, easy to use)
Connectivity
External: 1 Ethernet, 1 GPRS-EDGE (optional)
Internal: 1 Ethernet, 2 Serial RS232 - RS 485, 4 EventSensor ports to extend connectivity
2 Versions
Version 1 : Contact expansion
10 C (10 contact)
Version 2 : Mixed expansion
4 C (contact); 2 V (Analog voltage), 1 M (analog current), 3 R ( relays )
2 Options
Option 1 : EDGE modem internal expansion card
Option 2 : -48 V DC power supply & output voltages, +24, +15, -15 and +12 Volts DC
17
SiteBoss 550
6 expansion card slots
Various I/O expansion cards
EDGE or ADSL modem options
Monitor up to 1000 serial alarm messages
LUA Scripting language
Access network devices via dialup PPP
Fallback to dialup alarms if the Ethernet
connection fails
Management System
Optional internal run-time battery backup
VLAN support
18
SiteBoss 571
TM
Security: local or using RADIUS, VLAN, …
Scripting to combine different events for a better default understanding
Compatible with any SNMP element manager (NAGIOS, HP OV, TIMOS, …)
Complete connectivity with I/O
Contact closure, Serial RS232 - RS 485, analog (DC current and voltage)
Ethernet, ADSL, GPRS-EDGE
Smart Power Distribution Unit – High power relays (500 W)
DC Re-Boot, Load-Shedding upon event (Main Power Loss), “Graceful” Power-up
Optional AISG controller – Antenna Tilt
19
AC Current
3-PHASE AC POWER
SECURITY
Siren, Indoor Siren/Strobe
Temperature/Humidity Sensor
Indoor or Outdoor Use
For more information, please contact
CONTACT
INFORMATION
idware
Related Documents
