Ibico Kombo Binder - Office Equipment: Binding … · Ibico Kombo Binder Installation and Set-up ... Attach handle right hand side onto shaft end. Secure handle using enclosed screw

1

Toll Free: 800-658-8788 Fax: 801-927-3037

[email protected]

Ibico Kombo Binder

Installation and Set-up Carefully unpack and inspect your new Ibico plastic binding machine for shipping damage. If any damage is noticed it should be brought to the immediate attention of the delivery carrier. Place the machine on a suitable table close to an easily accessible 115 volt outlet. The following instructions will demonstrate certain methods and techniques to improve your binding results. Before using the machine carefully read through these instructions. This machine is designed to punch up to 12 sheets of common photo copy paper. Cover materials vary in thickness and composition; as a rule, covers should be punched two at a time separate from the document. Some brands of clear plastic covers and sheet protectors do not punch cleanly and may damage the machine. All Ibico cover materials are manufactured to punch cleanly in any Ibico machine. Starting the Machine To start the machine, plug into standard electricity socket (115 V). Punching block moves audibly into starting position. Attach handle right hand side onto shaft end. Secure handle using enclosed screw and allen wrench. Punching

1. Use guide to determine size of plastic comb. 2. Adjust punching depth with black knob (on right hand side). 3. Fanning and jogging the paper enables all sheets to be placed flush against the paper stop for

punching. 4. Place sheets flush into the machine (use side guide for adjustment). 5. Press switch on top right hand side. If too many sheets are used, the punching block automatically

reverses back to its original position. Reduce number of sheets to maximize punching capacity and press switch again to restart cycle.

Binding

1. Place plastic comb open side up behind vertical metal fingers. 2. Push handle toward the rear to open rings of the plastic comb to the desired distance. 3. Set the opening of the comb with black knob (left hand side). 4. Place punched sheets into open comb, front page facing you. 5. Move handle back into original (vertical) position to close binding element. 6. Remove bound and finished book vertically.

Adding and removing pages once bound To add and remove pages once bound, reverse operation. Your Ibico document is now bound! Punching Capacity: 10 to 12 sheets (regular copy paper). Maximum 2 covers (10 Mil). Note: Empty the waste drawer regularly. Technical Data: 115 Volts 60Hz 120 Watts 1.4 amps

2

IBICO Plastic Comb Guide: Margin Depth Position 1 Position 1 φ (in) Round 3/16” ¼” 5/16” 3/8” 7/16” No. of sheets (80 gsm) 12 20 40 55 70 Margin Depth Position 3 φ (in) Round ½” 9/16” 5/8” No. of sheets (80 gsm) 90 100 120 Margin Depth Position 4 φ (in) Round ¾” 7/8” 1” 1-1/8” No of sheets (80 gsm) 150 170 200 220 Margin Depth Position 4 φ (in) Oval (S.L.) 1-1/4” 1-1/2” 1-3/4” 2” No. of sheets (80 gsm) 230 290 360 425 IMPORTANT: To turn the machine off, disconnect plug from socket.

LIMITED WARRANTY FOR PUNCHING AND BUINDING EQUIPMENT

IBICO punching and binding equipment is warranted for a period of one year form the date of the dealer’s sale to the consumer. Excluded from the warranty are the dies which are subject to wear. For service of a unit under warranty, call Ibico Inc. Repair Services at 1-800-487-4069. IBICO INC. will repair or replace at your option the unit free of charge and return it prepaid. Please include a copy of your paid invoice. Any unit sent without proof of purchase will not be serviced free of charge. Instead such units will be serviced at the prevailing rates and returned C.O.D. This warranty does not extend to any IBICO machine that has been subject to misuse, neglect, accident, or it the serial number has been altered or defaced, or the unit has been opened. This warranty contains the entire obligation of IBICO INC. Unless prohibited by law neither this warranty nor any other warranty express of implied, including implied warranties of merchantability, shall extend beyond the warranty period. No responsibility is assumed for incidental or consequential damages. This warranty is valid only within the contiguous 48 states. IBICO INC. will honor this warranty outside this area with the stipulation that all shipping and related charges involved in transporting the defective unit to and from IBICO’s premises will be borne by the customer.

3

4

Parts List

ITEM GBC# IBICO# DESCRIPTION QTY. 1) 7400602 2230043 CHASSIS PB 21 1 2) 7400520 2232031 DRAWER GUIDE 2 3) 7400521 2218210 RUBBER FOOT 4 4) 1907204 8-32X ½ SLTD. HEX SELF TAP SCREW 6 5) 7400522 2216033 STOP PAPER GUIDE 1 6) 7400523 2215910 ADJUSTING SCREW 1 7) 7400524 2216110 WASHER 1 8) 1800301 9930300 WASHER M6 1 9) 7400586 1111790 BEARING BRACKET ASM. (RIGHT) 1 10) 1800105 9902400 PHILIPS SCREW FLT HD M5X10 10 11) 7400588 1132090 AXLE COMPLETE 1 12) 7400587 1112390 BEARING BRACXKET ASM. (LEFT) 1 13) 1800133 9901000 ALLEN SCREW M5XZ10 BURNISHED 7 14) 7400619 2234410 SPRING WASHER 1 15) 1800306 9930900 DISTANCE PLATE 14X26X0.5 2 16) 1800455 9950400 RETAINING RING A14 2 17) 7400620 2215129 PAPER STOP LEVER 1 18) 7400621 2215229 PAPER STOP GUIDE 1 19) 7400622 1116390 PAPER STOP RAIL CPL. 1 20) 7400589 1103490 PUNCH BLOCK ASM. (LEFT) 1 21) 7400510 1103690 PUNCH BLOCK ASM. (CENTER) 1 22) 7400590 1103790 PUNCH BLOCK ASM. (RIGHT) 1 23) 1800103 9900300 ALLEN SCREW M5X12 BURNISHED 4 24) 1800108 9900500 ALLEN SCREW M5X16 BURNISHED 8 25) 7400591 1112790 PRESSURE BEAM ASM. 1 26) 7400592 1116690 TOOTHED RACK ASM. (RIGHT) 1 27) 7400593 1116790 TOOTHED RACK ASM. (LEFT) 1 28) 1800307 9940100 SPRING LOCK WASHER M5 6 29) 1800110 9901100 ALLEN SCREW M5X20 BURNISHED 2 30) 7400634 2213610 PRESSURE SPRING 2 31) 7400594 1116590 SPRING HOLDER ASM. (LEFT) 1 32) 7400595 1116490 SPRING HOLDER ASM. (RIGHT) 1 33) 7400638 2230843 COVER PLATE (LEFT) 1 34) 7400639 2230943 COVER PLATE (RIGHT) 1 35) 7400596 1132890 HINGE ASM. (LEFT) 1 36) 7400597 1132990 HINGE ASM. (RIGHT) 1 37) 7400651 2234500 CONTROL KNOB 1 38) 7400652 2226000 KNOB 1 39) 1800402 9920500 NUT 2 40) 1960530 LOCTITE 1 41) 1800113 9911300 SCREW 1 42) 7400653 2226100 KNOB COVER 2 43) 1931503 LUBRIPLATE #130-AA 1 44) 7400598 1133590 BACK COVER IBICO-GREY 1 45) 7400599 1133490 FRONT COVER IBICO-GREY 1 46) 1800107 9903000 THREAD CUTTING SCREW M3X8 16 47) 7400505 1131090 COMB ASM. 1 48) 7400656 1133029 CARRIER CPL. 1 49) 7400542 2230320 SLIDE 1 50) 7400659 1130190 COVER PLATE ASM. 1 51) 7400661 2233710 DRAWER 1 52) 7400600 1132290 LEVER COMPLETE, GREY KOMBO 1 53) 7400667 0640051 RULER, KOMBO SELF ADHESIVE 1

5

6