7/29/2019 i3BOOK User-manual ENG
1/28
SOFTWARE USER MANUALi3BOOK
7/29/2019 i3BOOK User-manual ENG
2/282 www.i3-learning.com/i3book
7/29/2019 i3BOOK User-manual ENG
3/283
CONTENTS
I. Product description 04
II. Software Installation, Uninstall, and Registration 04
1. System Requirements 04
2. Installation procedure 05
2.1 Installing i3BOOK software 05
3. Uninstall procedure of i3BOOK 06
3.1 Removing i3BOOK software 06
III. Registration procedure of I3BOOK software 07
1. Software Registration Method 07
2. Technical Characteristics of i3BOOK 08
IV. Function Description of System 09
1. Main interface introduction of I3BOOK software 09
1.1 Main toolbar 09
1.2 Resource library of toolbar on the left 09
1.3 Resource library of I3BOOK software 09
1.4 Floating toolbar 09
1.5 Location of oating toolbar 09
2. Windows mode 10
3. Software features 10
3.1 File 10
3.2 Undo 12
3.3 Redo 12 3.4 New page 12
3.5 Delete a page 12
3.7 Next page 12
3.8 Right click 13
3.9 Zoom 14
3.10 Roam page 14
3.11 Select 14
3.12 Pens 14
3.13 Color 15
3.14 Eraser 15
3.15 Inserts 15
3.16 Text 18
3.17 Handwriting Recognition 19
3.18 Fill and Border Fill 19
3.19 Mathematical Tool 19
3.20 Others 22
3.21 Custom Tool 24
3.22 i3 BOOK Menu 24
3.23 More 25
3.24 Floating toolbar on the right 25
3.25 Toolbar on the left 25
3.26 Drag 26
3.27 Scratch 26
V. Other description 27
7/29/2019 i3BOOK User-manual ENG
4/284 www.i3-learning.com/i3book
i3BOOK software is an easy to use, yet professional multimedia interactive and display tool designed for interactive teaching,
presentations, and educational applications. Integrating a set of multimedia courseware tools i3BOOK allows the user to write,
wipe, annotate and record with the touch of a finger or pen. In addition, i3BOOK software can be used for making courseware
to facilitate the use by teachers in classroom and meeting scenarios.
i3BOOK integrates seamlessly with any software program allowing for resources to be imported, stored, or shared enhancingthe teaching process. This manual is applicable to all models of i3 technology running i3BOOK software. For specific information
regarding the i3 technology hardware please refer to your hardware user manual.
1. SYSTEM REQUIREMENTS
Operating System: Windows XP or higher
Pentium 4 processor or higher
1 GB (more than 2 GB recommended)
Media Player
1 GB free disk space (full installation)
A screen resolution of 1024768 (16 bit color or higher)
I. PRODUCT DESCRIPTION
II. SOFTWARE INSTALLATION, UNINSTALL, AND REGISTRATION
7/29/2019 i3BOOK User-manual ENG
5/285
2.1 Installation Procedure of I3BOOK software
Run the installation program and click on [Next] button successively according to the prompt of interface to finish the installation
of I3BOOK software. Figures 1-6 shows the I3BOOK software installation procedure.(Note: Installation of the i3BOOK software
must be run with administrator rights. For Windows 7 operating systems right-click the program icon and select run as administrator)
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
2. INSTALLATION PROCEDURE OF I3BOOK SOFTWARE
7/29/2019 i3BOOK User-manual ENG
6/286 www.i3-learning.com/i3book
3.1 Uninstall I3BOOK software
Operation instruction:You can uninstall the I3BOOK software by following methods:
Method I: In the program installation directory choose uninst.exe, When prompted whether all components shall be removed,
select YES (Figure 2). i3BOOK will be removed from your system. (Figure 4)
Method 2: From the system control panel and choose add/remove programs, Select I3BOOK software from the list of installed
programs and choose the uninstall option in the pop-up window, successively click on [Next] to finish the uninstall. (Figures 1-4)
Figure 1
Figure 2
Figure 3
Figure 4
3. UNINSTALL PROCEDURE OF I3BOOK SOFTWARE
7/29/2019 i3BOOK User-manual ENG
7/287
1. Software Registration Method
Immediately following installation of i3BOOK you wil l be prompted to register your license of i3BOOK. If you choose, enter your
product SN number following the procedure shown (Figures 14) to complete the software registration; Alternatively, select
[Register] under the [i3 Book] option located in the main toolbar of the i3BOOK software.
Please note: If i3BOOK is not
registered, it can be used for
trial purposes up to 10 times.
Upon the completion of the trial,
i3BOOK will no longer function.
Note: The serial number
purchased by user can only
register one computer.
III. REGISTRATION PROCEDURE OF I3BOOK SOFTWARE
Figure 1
Figure 2
Figure 3
Figure 4
7/29/2019 i3BOOK User-manual ENG
8/288 www.i3-learning.com/i3book
2. Technical Characteristics of I3BOOK software
I3BOOK interactive software can be used for teaching and meeting. It was specifically designed for use with interactive
whiteboards, touch displays and tablet PCs.
The pen and highlight tools allows you to freely annotate and highlight text or objects on any page; a highlighter can make font color look
more beautiful; The magic pen recognizes the freehand shapes you draw. The handwriting tool transforms handwritten numbers and
letters into editable type.
Choose between a small, middle, large, ellipse, object or page eraser tools.
Mathematical formulas can automatically generate a corresponding function curve graph.
Chart tools can automatically a generate histogram, pie chart, broken line chart, area chart and bubble statistical chart.
The line tool can be used to draw a corresponding line according to the thickness and color of the line selected by user.
The text tool can be used to input the text that user wants to show.
The fill tool can fill the border or surface of the selected objects.
The table tool generates corresponding tables according to the number of longitudinal and cross cells selected by the user, and allows you
to set the line width and color of the cells.
The screen shade tool can be used to hide/reveal areas of the screen.
The black screen tool allows you to instantly hide all objects on the screen showing a completely black image.
The ruler and a set square tools are able to simulate their real world counterparts, with the ability to scale, rotate and change from metric
to imperial numeration.
The screen capture tool enables you to capture all or part of the screen and import it into a i3BOOK whiteboard page.
A screen recording tool allows for simple capture of all actions of an instructor for later playback.
The Exhibition Stand tool converts your webcam into a document camera allowing instructors to capture and show real world objects in
their documents.
Full-screen editing: The page content is displayed full screen.
Encrypted document: Set password for the document created by user so as to protect such document from being used by others.
The background custom tool is able to fill the page background with a single color, gradient ramp, grid, or image.
A spotlight tool is provided to draw attention to a specific region of the screen. The spotlight can be freely dragged in all directions.
A screen roaming tool is designed to move all materials on the screen simultaneously
A zoom tool is provided to zoom in/out on the current page; Additional zone zooming can be used to zoom in/out of a specific area.
7/29/2019 i3BOOK User-manual ENG
9/289
Click on the icon to start I3BOOK. Alternatively, select i3BOOK from the Start > Programs menu.
1. Main interface introduction of I3BOOK software
1.1 Main toolbar
The main toolbar of i3BOOK includes the primary object
processing tools needed to annotate, create charts, tables,
change color and so on. (As shown in the figure)
1.3 Common Resource Library
A resource library of common objects and symbols is
provided with I3BOOK.
1.4 Floating toolbar
The floating toolbar is on the right of screen as default.
This toolbar will float above all running programs and
provide the same functions as the Main toolbar.
1.5 Location of floating toolbar
The floating toolbar is on the right of screen as
default, and you may click on to switch it to
be on the leftt of screen.
The main toolbar is on the top of software as default, and
you may click on to switch it to be at the bottom of
software.
IV. SOFTWARE FEATURES
1.2 Page & Common toolbar
Provides quick access to accessand switch between multiple
pages as well as access the common resource library.
Resource list:
Provide resources that may
be applied by user in editing/
drawing process, and user may
use them by directly draggingthem on the current page of
whiteboard.
Universal symbols
7/29/2019 i3BOOK User-manual ENG
10/280 www.i3-learning.com/i3book
2. Windows mode
By pressing the toggle desktop icon in the floating toolbar, users can quickly switch to desktop mode. To return to
i3BOOK, press the icon.
3. Function Operations of I3BOOK software
3.1File
3.1.1 Create a new file
Operation:
Click on new button under [File] in main toolbar.
If a current page is open, system will prompt the user to
save the current file or not.
If changes are confirmed, the system will prompt the user
to save the file.
3.1.2 Open a file
To open a previously saved file for editing:
1. Click on icon under [File] in main toolbar.
2. This window will pop up, and you may select the file
needed to be opened.
3.1.3 Encrypt a file
Set a password to the file created by user so as to protect
the file from being used by another user. Opening of the
file will only be allowed once the password is entered.
Click on [File] ->[Encrypt a file] in main toolbar.
3.1.4 Export current page
Click on [File] ->[Export current page] in the main
toolbar, and the active page can be exported to a folder
as a JPG picture or PDF.
7/29/2019 i3BOOK User-manual ENG
11/2811
3.1.5 Import
Import: Save the contents of Word, Excel, PowerPoint, and
PDF files to the page list of I3BOOK software in the form
of background or picture. Accepted file formats are .doc,
.docx, .xls, .xlsx, .ppt, .pptx, and .pdf.
Operation instruction: 1. Click on under [File], select a
pdf file in the pop-up box, and imported type is background,
as shown in the figure:
2. After importing successfully, the page list is as shown in
the figure below:
Figure 1
Figure 2
3.1.6 Save
Save: Save the currently open/editing file to local disk.
3.1.7 Save as
Save as: Save currently open file to template library in
WKB file format, so that it can be directly called from
template library next time.
1. Save/Save as: Save currently open file to local disk;
user may save the file in WKB format, and in thesaving of file, the system will automatically name it
with current date, and it may be modified by user.
2. Operation instruction: You may save the file by
clicking on Save/[Save as] button in main
interface.
3.1.8 Print functionProvide functions of print, print current page, print
preview and print setup.
Operation instruction: Select [Print all] under [File] the
toolbar to set up the printer, and then select [Print]
or [Print current page] according to your needs to print.
IV. SOFTWARE FEATURES
7/29/2019 i3BOOK User-manual ENG
12/282 www.i3-learning.com/i3book
3.1.9 Print all
Print all: Print all pages, print preview, and print setup.
3.2 Undo
Undo: Cancel previous operation.
Select the Undo button in [Main toolbar] /
[Floating toolbar].
3.3 Redo
Redo: Recover the information undone last time.
Select the Redo button in [Main toolbar] /
[Floating toolbar].
3.4 New page
New page: Add a blank page below the active page.
Select in main toolbar to add a blank page as shown in
the figure.
Figure 1
3.5 Delete a page
Delete a page: Delete the active page or a blank page
selected from the page list.
Operation: Select in [Main toolbar] to delete currently
selected page.
3.6 Previous page
Click on [Previous page] to page up. As shown in Figure
(1), page up from Page 3 to Page 2.
3.7 Next page
Click on [Next page] to page down. As shown in Figure
(1), page down from Page 2 to Page 3.
7/29/2019 i3BOOK User-manual ENG
13/2813
3.8 Right click
Select operation functions of right button in I3BOOK
software.
Operation:
1. Click the [Right click] icon in [Main toolbar].
2. Click the [Right click] icon in [Floating main toolbar]
3. User may click on the page for 3sec, and the right click
menu will pop up. (As shown in the figure)
3.8.1 Group
Group multiple objects into one object, as shown in Figures
1-2.
3.8.2 Arrange
Arrange object, as shown in Figure 3 - 4.
3.8.3 Align
Align multiple objects with one object, as shown in 5 6.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
IV. SOFTWARE FEATURES
7/29/2019 i3BOOK User-manual ENG
14/284 www.i3-learning.com/i3book
3.10 Roam pageMove current page.
Select Roam button in [Main toolbar] / [Floating
toolbar] to move the page to be infinite.
3.12.2 Line
The line tool can be used in page drawing area and
desktop annotation, and the line color, thickness,
transparency, line type and length unit can be set up
separately.
Operation: Click on [Main toolbar] / [Floating toolbar]
Line button.
3.12.3 Dashed line
The line tool can be used to draw dashed line on the
page, and the dashed line type can be configured in
system settings.
Operation: Click on [Main toolbar] / [Floating toolbar]
Dashed Line button.
3.12.4 Magic pen
The magic pen can be used to make intelligent judgment
for any closed lines drawn by user on the page and show
them in normal geometric graphs such as rectangle,triangle, oblong shape, trapezoid and so on.
Operation: Click on [Main toolbar] / [Floating toolbar]
Magic Pen button.
Drawing with magic pen: Draw or write
3.12.5 Point to Point Pen
This tool can be used to draw any broken line, curve
or geometric graph. Meanwhile, the thickness, color,
transparency, length unit, solid or hollow effect of how
the line can be set.
Operation:
1. Click on [Main toolbar] / [Floating toolbar]
Point to Point button.
2. Click on the Point to Point button once to
draw a point, click on it again, and the two points will
be formed into a straight line, until a closed object is
drawn.
Drawing of point to point line:
3.11 Select
If other operation is needed, click on [Select] to revert to a
selection tool / mouse pointer.
Click on Select button in \ [Main toolbar] / [Floating
toolbar].
3.12 Pens
The pen tool contains eight (8) pen types; pencil, line, dashed
line, magic pen, point to point, highlighter, soft brush, and
calligraphic brush. The color, thickness, transparency and
other effects can be customized.
Operation:
Click on [Pens] in
[Main toolbar], or in [Floating toolbar].
3.12.1 Pencil
The pencil tool can be used to write on current page, and
the pencil color and thickness can be configured in systemsettings.
Operation: Click on [Main toolbar] / [Floating toolbar]
Pencil button.
3.9 Zoom
Zoom in/out page or region
Select [Zoom in] , [Zoom out] and
[Region zoom] under in [Main toolbar].
Zoom in: Zoom out:
7/29/2019 i3BOOK User-manual ENG
15/2815
3.12.6 Highlighter
The highlighter can be used directly to highlight in a
semi-transparent color.
Operation: Click on [Main toolbar] / [Floating toolbar]
Highlighter button.
3.12.7 Soft brush
The soft brush can make the writing more natural aesthetic.
Operation: Click on [Main toolbar] / [Floating toolbar]
Soft Brush button.
3.12.8 Calligraphic Pen
Calligraphic pen allows annotating with a scripted stroke
mimicking a calligraphy pen.
Operation: Click on [Main toolbar] / [Floating toolbar]
Calligraphic Brush button.
3.13 ColorOperation: Click on Property button in [Main toolbar] /
[Floating toolbar].
Setting of paintbrush color, transparency and thickness:
3.14 Eraser
Four erasers are provided, namely, ordinary eraser, ellipse
eraser, object eraser and page eraser.
Operation: Click on Eraser button in [Main toolbar] /
[Floating toolbar].
Eraser: Three ordinary erasers including small-sized eraser,
middle-sized eraser and big-sized eraser, as well as ellipse
eraser, object eraser, and page eraser are provided.
Prompt: Eraser is designed to erase pen text only. (As shown
in the figure)
Ordinary erasing:
Object erasing: (after erasing)
3.15 Inserts
3.15.1 Image
Insert an image: Image can be inserted into the page.
Operation: Select [Image] button in [Main toolbar] /
[Floating toolbar] to add an image to editing
area of page, and the operation procedure is shown in
Figures 1-2.
Note: Image formats contain: JPG., PNG and so on.
Figure 1Figure 1
Figure 2
After an image is added to a page, it can be deleted byselecting the file and right clicking on Delete.
IV. SOFTWARE FEATURES
7/29/2019 i3BOOK User-manual ENG
16/286 www.i3-learning.com/i3book
3.15.2 Flash file
Flash files can be added to a page.
Operation: Select button in [Main toolbar] / [Floating
toolbar] to add a section of Flash file in editing area
of page, and the operation procedure is shown in Figures
1-2.
Note: The flash player plays files in a .swf format.
Select Flash file to be added.
3.15.3 Video file
Video files can be added to a page.
Operation: select in [Main toolbar] / [Floating toolbar]
to add a video file into the page, as shown in
Figures 1-2.
Note: The video player can play AVI, WMV, and MP3
formats.
Select Flash file and add it to the page.
Double-click on flash icon to start playing flash file or stop
playing flash. Clear flash file by clicking on X.
Double-click on video icon to start playing video file or
pause and stop playing file. Clear video file by clicking
the arrow to the right.
Figure 1Figure 1
Figure 2
Figure 2
7/29/2019 i3BOOK User-manual ENG
17/2817
3.15.4 Chart tools
Add various custom charts to the page.
Operation: Click on [Main toolbar] / [Floating toolbar]
button.
Prepare a chart: Add a new chart, or edit and delete a chart.
3.15.5 Table tool
Add a table to the page.
Operation: Click on [Main toolbar] / [Floating toolbar]
button.
Prepare a chart: The line width and color of chart can be
set simultaneously.
Enter text: Write text into the cell as shown in the figure
Add a new chart, and enter name and value.
Setting the color of data graph in the chart:
Generate a chart:
Setting of chart name, color, transparency and type:
IV. SOFTWARE FEATURES
7/29/2019 i3BOOK User-manual ENG
18/288 www.i3-learning.com/i3book
3.15.6 Background color
Single color fill, gradient, grid, and image background.
Operation: Click on [Main toolbar] / [Floating toolbar]
button, and the background will be in
the color set by user.
Select the background color in the color editor.
After the color to be added is confirmed, the background of
page will change color. The background color of page canbe cleared by clicking on Cancel background.
Selecting a background image:
Add the background image to the page:
3.15.8 Remove background
Click on [Main toolbar] / [Floating toolbar]
button to remove the background
color and background image added to the page.
3.16 Text
Add a text to the page.
Operation: Click on [Main toolbar] / [Floating toolbar]
Text button.
Text tool: Text can be added in text area. Click the text
editing icon and the text edit box will appear.
Text (font, size, format, zone and color) can be set, and
annotation can be added in text area. Touch the soft
keyboard, and type directly on the screen.
3.15.7 Background image
Add a background image to the page.
Operation: Click on [Main toolbar] / [Floating toolbar]
to add a background image.
7/29/2019 i3BOOK User-manual ENG
19/2819
IV. SOFTWARE FEATURES
3.17 Handwriting Recognition
Annotate numbers or letters directly on the page and
i3BOOK will recognize your writing, turn it into editable text.
Operation: Click on [Main toolbar] / [Floating toolbar]
Text button.
3.18 Fill and Border Fill
Operation: Click on [Main toolbar] / [Floating toolbar]
content color fill and Border Fill button.
Color fill: Employ fill tool.
Select any solid object, and then select color to apply
content and border color fill and grid fill.
Content color fill:
Border color fill:
3.19 Mathematical Tool
3.19.1 Ruler
The ruler can rotate to any angle and stretched infinitely
according to your needs.
Operation: Click on [Main toolbar] / [Floating toolbar]
Ruler Tool button.
The ruler will be displayed in the page, as shown in the figure.
Stretch or narrow the length of ruler, and the graduation
value will be increased and decreased accordingly. Click on
the button on the ruler to change the measurement
type. Use the button to rotate the ruler.
3.19.2 Triangle
Use a right triangular ruler tool to measure the opposite
angle on the page, and rotate or move the right triangular
ruler tool. Click on the button on ruler, and the unit
and degree of angle to be measured can be changed.
Operation: Click on [Main toolbar] / [Floating toolbar]
Triangular Ruler Tool button.
Draw a straight line with painting brush and line tool
along the graduation edge of ruler. Use the Turn
button to rotate the right triangular ruler. (As shown in
the figure)
7/29/2019 i3BOOK User-manual ENG
20/280 www.i3-learning.com/i3book
3.19.3 Protractor tool
The protractor tool can be used to measure angles.
Operation: Click on [Main toolbar] / [Floating toolbar]
Protractor Tool button.
Operation of measuring an angle:
Align one yellow pointer line of the protractor
with one leg of the angle to be measured.
If the yellow pointer line and the lower leg of the angle
cannot be aligned, click on to rotate the protractor.
As shown in the figure above:
After one yellow pointer line of the protractor is aligned
with one leg of the angle, rotate the other yellow pointer
to align it with the other leg of the angle to be measured.
The degree of the angle will automatically be displayed
the center of the semi-circle. As shown in the figure
above.
Click the button in protractor, and click on the option
>Function>Draw Angle so a check mark appears in front
of Draw Angle
After fixing one end of protractor, rotate the yellow
pointer line to the desired degree mark, and the system
will automatically display the angle you need.
To change the protractor size, drag the button left
or right, along the base of the protractor.
Exit:Click on button to exit, as shown in the figure
7/29/2019 i3BOOK User-manual ENG
21/2821
IV. SOFTWARE FEATURES
3.19.4 Compass tool
The compass tool can be used to easily draw arcs and
sectors.
Drawing an arc:
Operation:
1. Click on [Main toolbar] / [Floating toolbar]
icon, and when the compass tool appears in the page,
select [Drawing mode] Arc Drawing Tool buttonin the compass.
2. The compass has three operational points: the spiked
bar, the bar with the pen and the handle. Drag the
spiked bar to move and rotate the compass. Drag the
bar with the pen to increase or decrease the distance
between the bars (circle radius). Drag the handle to
draw.
Draw a sector:
Operation:
1. Click on [Main toolbar] / [Floating toolbar]
icon, and when the compass tool appears in the page,
select [Drawing mode] Sector Drawing Tool
button in the compass.
2. The compass has three
operational points: the spiked
bar, the bar with the pen and
the handle. Drag the spiked
bar to move and rotate the
compass. Drag the bar with the
pen to increase or decrease
the distance between the bars(sector radius). Drag the handle
to draw.
3.19.5 Function
Provide various different types of function. In use,
input the function expression, click on OK and the
corresponding function graph will be generated.
Operation: Click on [Main toolbar] / [Floating toolbar]
Function button.
Function button:
Eight types of functions are available. Select a predefinedfunction from function toolbar or input your own
expression in [Custom] (as shown in the figure), click OK
and the corresponding function graph can be generated.
Add a negative sign before the function, and the function
graph direction can be adjusted.
3.19.6 Mathematical formula
User can view or set a mathematical formula.
Operation: Click on [Main toolbar] / [Floating toolbar]
button.
7/29/2019 i3BOOK User-manual ENG
22/282 www.i3-learning.com/i3book
3.20 Others
3.20.1 Shade
Shade can be used to hide/reveal certain areas of the
screen. The shade can be dragged in all directions.
Operation: Click on [Main toolbar] / [Floating toolbar]
[Shade] button.
3.20.2 Black screen
The black screen tool allows you to black out the screen and
display a text message.
Operation:
1. Click on [Main toolbar] / [Floating toolbar]
Black Screen button.
2. Enter the message to be displayed.
3.20.3 Full screen editing
Display the page content in full screen mode.
Operation:
Click on [Main toolbar] / [Floating toolbar]
Full Screen Edit button. (As shown in Figures 1-2)
Click on the button on lower right corner to exit from
full screen edit state.
Figure 2
Figure 1
7/29/2019 i3BOOK User-manual ENG
23/2823
3.20.4 Screen capture
Operation:
Click on [Main toolbar] / [Floating toolbar]
Screen Capture button. As shown in the figure:
3.20.5 Screen recording
This function is used to record the operation steps of screen.
Operation:
Click on [Main toolbar] / [Floating toolbar]
Screen Recording button.
Click on [Start] to start recording your actions and save
them in WMV video format.
Click on to pause recording. Click on to stop recording.
IV. SOFTWARE FEATURES
3.20.6 Spotlight
The spotlight tool is provided to highlight a certain area
of the screen. The spotlight can be freely dragged in all
directions.
Operation:
Click on [Main toolbar] / [Floating toolbar]
Spotlight button.
3.20.7 Exhibition Stand
Operation:
Click on [Main toolbar] / [Floating toolbar]
Exhibition Stand button.
The Exhibition stand converts your webcam into a
document camera so that real objects can be shown and
turned into electronic pictures. (As shown in Figures 1-2).
Figure 1
Figure 2
7/29/2019 i3BOOK User-manual ENG
24/284 www.i3-learning.com/i3book
3.21 Custom Tool
The custom tool list can be used to put common tools (e.g.
office, ie browser, etc.) in the i3BOOK toolbar. Saved tools
can be displayed by clicking on [Custom tool].
Select the tool, click on button, and
the tool can be deleted.
3.22 i3BOOK Menu
3.22.1 Software registration
Refer to II. i3BOOK Registration
3.22.2 Custom tool list
Custom tool list can be used to put common tools (e.g.
office, ie browser, etc.) in the i3BOOK toolbar making
them easy to reach.
After opening, click on the button,
display the custom tool path, click on button on
the right, select the common tool you need, click OK.
The tool can also be displayed in the function list
below, and viewed in [Custom tool] of
main toolbar.
7/29/2019 i3BOOK User-manual ENG
25/2825
IV. SOFTWARE FEATURES
3.23.4 System settings
System settings can be used to change the language.
3.24 Floating toolbar
3.24.1 Switch back to desktop
When i3BOOK software in the foreground, click on Switch
back to Desktop button, and computer desktop content
can be displayed, not needing exiting from software.
Operation:
Click on [Floating toolbar] button.
3.24.2 Save commentSave the annotation which is made in desktop state.
Note:Click on [Floating toolbar] button.
3.24.3 Switch back to software
When i3BOOK is open, click on Switch back to Desktop
button, and computer desktop content can be displayed,
without needing to exit from software. To swtiching
back, click on this button, and the whiteboard content
can be displayed.
Operation:Click on [Floating toolbar] button.
3.25 Toolbar on the left
3.25.1 Page list
Click on Page List to display all the pages in your lesson.
Operation:
Select [Page list] in [Toolbar on the left].
3.23 More
By default, the [More] button includes the [Custom
Tools] and [i3BOOK] buttons. When the screen resolution
or the window size are insufficient, more buttons will be
added to it to keep the screen clutter free
7/29/2019 i3BOOK User-manual ENG
26/286 www.i3-learning.com/i3book
3.25.2 Common
The Common tool can be used to display basic object
information (e.g. circle, five-pointed star, polygon, etc.), and
user can directly drag the symbol to the page to use.
Operation:
Select [Common] in [Toolbar on the left] (as shown in the
figure below).
3.26 Drag
You can directly drag the picture, text and other files
to current page of white board, so as to display the
materials such as picture and text file, etc. directly on
the page, as shown in Figures 1-2.
Figure 1
Figure 2
7/29/2019 i3BOOK User-manual ENG
27/2827
This manual is provided to i3BOOK users with the express
knowledge and understanding that i3BOOK, its authors,directors, shareholders, agents and employees, the
producers of this manual or any approved person working
on behalf of these companies (hereinafter referred to as
the Company Agents) will not be responsible or in any way
liable for the results of any act done or omitted to be done
on the basis of information contained in this manual, nor for
any errors or omissions in said information. The Company
Agents expressly disclaim all and any liability for any loss or
damage which may be suffered by any person or corporate
entity which may make use of this manual or any person
arising out of or as a result of or in connection with any act
done or omitted to be done by the person using the manual
in reliance, whether whole or partial, upon the whole or
any part of the contents of this manual whether that loss/
damage is caused by any fault or negligence on the part of
the Company and Agents, or otherwise howsoever.
V. OTHER DESCRIPTION
7/29/2019 i3BOOK User-manual ENG
28/28
BELGIUM-LUXEMBOURG
Nijverheidslaan 60
8540 Deerlijk
Belgium
T +32 (0)56 313 415
F +32 (0)56 313 688
NETHERLANDS
Duwboot 91
3991 CG Houten
Netherlands
T +31 (0)30 6379387
F +31 (0)30 2547927
GERMANY
Lohrheidestrae 72
44866 Bochum
Germany
T +49 (0) 2327 960 50-0
F +49 (0) 2327 960 50-50
SCANDINAVIA
Lollandsvej 16
5500 Middelfart
Danmark
T +45 64 41 04 90
F +45 64 41 17 47
USA
549 Ionia Ave. SW
Grand Rapids, MI 49503
USA
T +616-451-7800F +616-451-9698
FRANCE
Parc dactivits de la Valle
de lEscaut Waka 1, n 9
59264 Onnaing France
T +33 (0)3 27 45 60 60F +33 (0)3 27 45 60 70
WWW I3 LEARNING COM
AUTHORISED RESELLER