Huawei Access Products Quick Reference Guide

Huawei EnterpriseAccess Products Quick Reference Guide

7Overview of the Access

UA5000 Series

DSLAM Series

xPON series - OLT

xPON Series - MDU

xPON Series - ONT

xPON Series - ONU (Power)

xPON Series - EOC

xPON Series - ODN

-01

-02

-04

-06

-08

-10

-11

-12

-13

Overview of the Access

With the development of the telecommunication technologies and the improvement on the quality of

life, common users propose new service requirements, and increasingly require high-speed data and

multimedia services apart from the legacy voice service. To meet such requirements of users, the access

network (AN) device must provide powerful capability of integrated services. In addition, networks are

evolving with each passing day, for example, from PSTN to NGN/IMS and FTTx. This also requires the AN

device to be future-proof.

Huawei FTTx solution provides access solutions for different application scenarios of custom, for

example, smart Grid solution for the Power, dual direction migration solution for the Broadcast, access

network of the railway, high-way, airport, etc. Cooperate with other product, Huawei FTTx solution also

provides Intelligent Building, Smart Zone solutions.

Overview

Solution Features

Network Topology

Access and aggregation integrated, helps to simplify network architecture, to lower TCO essentially.•

Unified platform with multiple technologies: xPON / P2P / DSL / POTS.•

Smooth network evolution solution extends AN' lifecycle and reduces TCO.•

TDM

IP

PBXE1/POST

SBU

SBU

ONU

ONT FTTH

POTSPC

FTTB

FTTO Leased Line

AP

FTTC

MDU

OLTSplitter

E1/STM-1

10GE

SDH PSTN/3G

Internet/3GROUTER

FE/GE

FE

FE

FE

FE

Access 7-01

UA5000 Series

To meet the customer and market requirements, Huawei launches the UA5000, which has a perfect and

mature system design, and features flexible networking, abundant service, and powerful functions. The

UA5000 complies with the RoHS directive, supports the seamless evolution from PSTN to NGN or IMS,

and also supports the upstream PON networking.

Overview

Product Appearance

Product Features

UA5000 FO2A ONU60A_V2

Innovative 4-in-1 platform implementing smooth network evolution.•

Perfect inheritance of traditional services implementing seamless service migration.•

Powerful bandwidth providing capability increasing the revenue.•

Unique designs of the COMBO board and 64-port POTS board saving the TCO.•

Perfect line assurance solution ensuring the O&M and user experience.•

7-02 Access

Comparison Between UA5000 Series Products

parameters UA5000 F02A ONU60A_V2

Dimensions(W× D×H)）

All kind of shelf600 mm × 600 mm × 2200 mm

436 mm × 420 mm

× 86 mm

Shelf configuration 2HABA Maximum: 5

Access service type Data, video, POTS, multi-media POTS(PSTN and IP)

NNIGPON/EPONGE(optical/electrical)FE(optical/electrical)

GE(optical)FE(optical/electrical)

UNI

POTS, ISDN-BRI, ISDN-PRI, ADSL2+, ATM G.SHDSL.bis, SHDSL, VDSL2, TDM G.SHDSL, E1,V.35/V.24, 2/4E&M, FXO

POTS, ISDN

Upstream protocol SIP/H.248/V5 H248/MGCP

Working temperature -10℃ ~ +45℃ -10℃ ~ +55℃ -5℃ ~ +45℃

Working humidity 10%~90%

Access 7-03

DSLAM Series

MA5600/MA5603 supports non-blocking gigabit Ethernet (GE) switching fabric, backplane capacity of

210G make it easy to extend customer's system within at least 5 years. MA5600/5603 adopt HUAWEI

self design software platform named VRP5.0, which have enough Layer 3 features to satisfy the different

requirements for specified customers.

Overview

Product Appearance

Product Features

MA5600 MA5603

Provide various network ports, service ports, and maintenance ports to meet different networking •

requirements.

As a multi-service access platform, the MA5600 supports multiple access modes and networking •

modes to suit various networking scenarios in different environments and to meet different service

requirements.

Service switching capacity of up to 48Gbit/s, packet forwarding capability of up to 72Mbit/s, and high •

integration of data switching, routing, and user management.

7-04 Access

In line with security requirements for custom services, the MA5600 provides the features to ensure the •

security of the system and the user.

The abnormality processing capacity is taken into consideration in the system, software, and hardware •

designs. This ensures the reliable running of the MA5600.

The MA5600 supports excellent management, maintenance, and monitoring functions, and works with •

the N2510 line assurance system that facilitates routine maintenance and fault detection.

Comparison between DSLAM Series Products

Parameters MA5600 MA5603

Shelf Specifications19 inches wide, front accessible16 slots,14 service slots

front accessible7 slots, 6 service slots

Dimensions (W × D × H)

MA5600 service shelf (without mounting brackets):

435.4 mm × 420 mm × 441.8 mm

MA5600 SPL shelf (without mounting brackets):

435.4 mm × 420 mm × 397.3 mm

MA5603 shelf (without mounting brackets):

436 mm × 419.2 mm × 219.5 mm

Shelf height 10U 5U

Upstream portsGE: 1-6FE: 1-6 optical ports; 1-4 electrical ports

Backplane bus capacity 210 Gbit/s 45 Gbit/s

Access service capacity ADSL2+, SHDSL, SHDSL.bis, VDSL2 ADSL2+, SHDSL, VDSL2

Maximum number of ports in a shelf

ADSL2+ ports:896SHDSL ports:448VDSL2 ports:448

ADSL2+ ports:384SHDSL ports:192VDSL2 ports:192

Access 7-05

Product Appearance

Product Features

MA5600T MA5603T

Access and Aggregation Integrated

Large aggregation capacity, 3.2T bit/s backplane capacity，960G bit/s switch capacity, 512K MAC •

addresses.

High density GE/10GE interfaces for cascading, up to 36*10GE or 384*GE interfaces, no need for •

additional investment of aggregation switches.

High reliability networking support direct connection to the BRAS, ONU dual-homing to two OLTs for •

redundancy and hitless software upgrade function.

xPON series - OLT

SmartAX MA5600T is the global first OLT which integrates the functionality of aggregation switch and

edge router. It can provide high density GPON and Ethernet P2P optical access, triple-play service, TDM/

ATM/Ethernet leased line services for business customers and mobile backhaul with high reliability and

high precision clock, and high density GE/10GE interfaces for cascading remote access equipments.

MA5600T helps to simplify network architecture, to improve network reliability and lower TCO

essentially. There are two types of frame.

The large frame has 16 service slots while the middle frame (which named MA5603T) has 6 service slots.

The hardware and software are all compatible between MA5600T and MA5603T.

Overview

7-06 Access

Parameters MA5600T MA5603T

Backplane bus switching capacity 3.2Tbit/s 1.5Tbit/s

System L2 packet forwarding rate

SCUN: 726 Mpps (in the active/standby mode) or 1452 Mpps (in the load balancing mode)

SCUN: 726 Mpps (in the active/standby mode) or 1452 Mpps (in the load balancing mode)

Control board switching capacitySCUN: 480 Gbit/s (in the active/standby mode) or 960 Gbit/s (in the load balancing mode)

SCUN: 480 Gbit/s (in the active/standby mode) or 960 Gbit/s (in the load balancing mode)

Maximum number of upstream ports (GE ports in the GIU slot) in a shelf

8 8

Maximum number of upstream ports (10GE ports in the GIU slot) in a shelf

4 4

Maximum number of GPON ports in a shelf

128 48

Any Access

Large capacity IPTV service provision, 8K multicast users and 4K multicast channels and 2k concurrent •

multicast channels.

H-QoS support 3-level QoS (Different ISP/ service/user) guarantees OLT wholesale.•

Traditional E1 service access, Native TDM or CESoP for traditional E1 service of enterprise and mobile •

base station access.

E2E high reliability guarantees business customers and mobile backhaul, BFD/LAG/MSTP/RRPP/Smart Link •

for uplink redundancy and 50ms switching time of Type B/Type C for fiber protection.

E-LAN function for local traffic inter-connection, meet the requirements of enterprise and campus •

network.

Green

With Huawei self-developed GPON chipsets, the maximum power consumption of the 8-port GPON line •

card is only 55W.

Unique energy-saving bus, the idle service card can be powered off.•

Comparison between OLT Series Products

Access 7-07

MA5620 24 x FE + 24 x POTS

MA5626 24 x FE

MA5620 16 x FE + 16 x POTS

MA5626 16 x FE

MA5620 8 x FE + 8 x POTS

MA5626 8 x FE

Product Features

Automatic adaptation to GPON and GE.•

Each of them provides two uplink ports using the small form-factor pluggable (SFP) optical modules to •

meet different site requirements.

They fully meet requirements for pure LAN access service or voice service on an FTTB network, inherits •

traditional voice services, and supports migration of narrowband users.

Plug-and-play (PnP) service provisioning: They allow remote issuing of configuration. A management •

channel and service channel are created after each of them is powered on and registers successfully.

Manual onsite configuration is not required.

Efficient management and maintenance: free of field software commissioning, remote acceptance, •

remote upgrade and patch installation, and remote fault location.

Environment-friendly and energy conservation: Each of them uses a highly effective power supply •

system to reduce system power consumption. Each of them uses passive cooling without any fans to

reduce device power consumption. Each of them uses POTS short-loop design to reduce port power

consumption in short distances.

xPON Series - MDU

The SmartAX MA5620/MA5626 and SmartAX MA5612 are industry-leading remote multi dwelling

units (MDUs) launched by Huawei, which provide broadband services and IP voice services on the

Fiber To The Building (FTTB) network for family users and small to medium enterprises. They feature

broad temperature range, low power consumption, mute design, high stability, environment friendlily

and energy conservation, and can be used on workbenches and installed in corridors and cabinets,

facilitating installation and maintenance.

Overview

Product Appearance

MA5612 MA5621

7-08 Access

Comparison between MDU Series Products

Parameters MA5621 MA5631 HG7022/7042 MA5612 MA5620 MA5626

NNI 1) 2×EPON2) 2×GPON3) 2×GE4) 1×GE+1

×EPON5) 1×GE+1

×GPON

Provide 1 RF InProvide 2×SFP and 1×GE uplink-port• 2×EPON• 2×GPON• 2×GE• 1×GE+1×GPON• 1×GE+1×EPON• 1×GE

1 × RF In 1) 2×EPON2) 2×GPON3) 2×GE4) 1×GE+1

×EPON5) 1×GE+1

×GPON

1) 2×EPON2) 2×GPON3) 2×GE4) 1×GE+1

×EPON5) 1×GE+1

×GPON

1) 2×EPON2) 2×GPON3) 2×GE4) 1×GE+1

×EPON5) 1×GE+1

×GPON

UNI 4×GE/FE+4×RS485/RS232(two RS485 serial ports and two RS232 serial ports by default,

and each of the serial ports can be configured as an RS485 or RS232

serial port as required)

1-4×RF Out 1) 1×RF Out2) HG7022:2FE3) HG7042:4FE

1) 2×GE+6×FE2) 2×GE+6×FE+

16×POTS3) 2×GE+6×FE+

16×POTS+1

×RFService boards:EIUC board (each board provides eight FE ports),ASNB board (each board provides 16 POTS ports),E81A board (each board provides eight E1 ports).

8FE+8POTS16FE+16POTS24FE+24POTS

24FE: 19 inch16FE: 19 inch8FE: 11 inch4GE+4FE(POE): 19 inch8FE(reverse POE): 11 inch

dimensions(W×D×H)

180mm × 235mm × 44.4mm

282mm × 163mm

× 116.5mm170mm × 110mm × 28mm

19 inch 1U height:

442mm × 245mm × 43.6mm(without the heating board or mounting brackets)

19inch 1U height:

442mm × 220mm × 43.6mm

(without the heating board or mounting brackets)

19inch 1U height:

442mm × 220mm

× 43.6mm (without the heating board or mounting brackets);

11 inch 1U height:

250mm × 220mm

× 43.6mm（without the heating board or mounting brackets) ;

Heatdissipationmode

No fans; passive cooling

No fans; passive cooling

No fans; passive cooling

fans No fans; passive cooling

No fans; passive cooling

Power supply mode

AC: 220V/110VDC: 12V/24V/48V

AC: 220V/110V/60V(60 V AC remote power supply and 220 V AC local power supply)

AC: 220V/110VDC: 12V

AC: 220VDC: 12Vbackup power: 12V

AC:220V AC: 220V,reverse POE power supply(8 FE)

VoIP / / / H.248/SIP H.248/SIP /

Access 7-09

Product Appearance

Product Features

Comparison between ONT Series Products

HG8010 HG8110 HG8240 HG8245 HG8247

Plug and play.•

Remote diagnosis.•

Batch method of upgrade.•

High speed forwarding.•

Green energy-saving.•

Performance parameters

HG8010 HG8110 HG8240 HG8245 HG8247

Dimensions(W×D×H)143 mm × 115 mm × 30 mm

143 mm × 115 mm × 30 mm

195 mm × 155 mm × 34 mm

195 mm × 174 mm × 34 mm

268 mm × 213 mm × 34 mm

Interface type 1GE 1POTS+1GE 2POTS + 4GE2POTS + 4GE + 1USB + WiFi

2POTS + 4GE + 1USB + WiFi + 1RF

Average power consumption

5.5 W 7 W 7.5 W 8 W 11 W

Power supply

Adapter input: 100–240 V AC, 50–60Hz;

Adapter output: 11–14 V DC, 1 A

Adapter input: 100–240 V AC, 50–60Hz

Adapter output: 11–14 V DC, 1 A

Adapter input: 100-240 V AC, 50-60 Hz

Adapter output:11-14 V DC, 1 A

Adapter input: 100-240 V AC, 50-60 Hz

Adapter output: 11-14 V DC, 2 A

Adapter input: 100-240 V AC, 50-60 Hz

Adapter output: 11-14 V DC, 2 A

Weight(not include adapter)

About 400g About 400g About 500g About 550g About 800g

xPON Series - ONT

Huawei provides a series of ONT products for various FTTH scenarios, which are based on the uniform

platform. By using the GPON/EPON technology, VoIP, Internet, Wi-Fi and HD video services are provided for

home and SOHO users.

Overview

7-10 Access

Product Appearance

Product Features

Automatic adaptation to GPON and GE modes: The MA5621 provides two uplink ports that use the •

small form-factor pluggable (SFP) optical modules to meet different site requirements.

Hand-in-hand PON protection.•

Sealed casting aluminum shell and natural heat dissipation (waterproof, dust-proof, and corrosion-proof).•

Auto-adaptive GE/FE electrical ports and configurable RS232 serial ports, reducing the number of •

maintenance times.

Support for 6 kV surge protection capability, applying to thunderous and rainy areas.•

Support for the working temperature ranging from -40• oC to +85oC, meeting extreme weather

conditions.

Auto-adaptive 9-60 V direct current (DC) input and 90-290 V alternating current (AC) input, facilitating •

installation.

Unified network management and plug-and-play: free of field software commissioning, remote •

acceptance, remote upgrade and patch installation, and remote fault location.

xPON Series - ONU (Power)

The SmartAX MA5621 (MA5621 for short) is the first multi-dwelling unit (MDU) specifically designed

for smart grid telecommunication in the industry, which supports natural heat dissipation and provides

2*GE/2*GPON uplink ports and 4*GE/FE+4*RS232 user ports. The MA5621 allows terminal units to

remotely collect and transmit required information, for example, to remotely control the power, monitor

environment safety, and read meters for billing. The MA5621 also can be used for video monitor services.

The MA5621 features a broad temperature range, broad voltage range, low-power consumption, and high

stability, and can be used on workbenches and installed in corridors and cabinets.

Overview

MA5621

Access 7-11

Product Appearance

Product Features

MA5631 HG7022/HG7042

Device integration: first ONU and EoC headend integrated product in the industry, saving optical node •

space.

Unified NE: ONU and EoC headend using the same IP address, saving network resources.•

Centralized NMS: a centralized NMS managing PON and EoC devices, reducing O&M costs.•

High reliability: Supports dual uplinks and ring networks.•

High bandwidth: Supports 300 Mbit/s service rate and 2.5 Gbit/s backplane bus rate.•

xPON Series - EOC

The MA5631 is mainly used in a passive optical network (PON)+EoC (optiCable for short) network. The

MA5631 provides gigabit PON (GPON), and gigabit Ethernet (GE) upstream modes to flexibly choose from,

and supports one to four-channel radio frequency (RF) input in the upstream direction and one to four-

channel RF output in the downstream direction. Supporting a valid bandwidth of currently 280 Mbit/s

(at the MAC layer) and future 1 Gbit/s, the MA5631 can meet users' requirements for bandwidth-hungry

services.

The EchoLife HG7022 EoC (HG7022) and EchoLife HG7042 EoC (HG7042) are indoor EoC terminals

tailored for home and SOHO (Small Office Home Office) users.

HG7022/HG7042 both models are designed for Homeplug AV standard cable network. Broadband data

are input via CATV cables. Then Ethernet and CATV data are separated to provide both video and data

services at the same time. The built-in duplex filter has no influence on CATV signals.

Overview

7-12 Access

Product Appearance

Product Features

Best Economic: • Huawei provides a comprehensive series of ODN products, the consultant-assisted

project consultancy service, and the optimal network planning scheme. By comprehensively analyzing

the feasibility of an ODN project, Huawei provides a best economic ODN solution for customer.

Fast Deployment:• Based on rich engineering experience, Huawei concentrates efforts into engineering

efficiency improvement by optimizing product design and engineering technologies to achieve fast FTTH

deployment.

Easy Management (iODN): • iODN is endowed with multiple intelligence functions, such as automatically

identifying and managing optical fiber connections, intelligently indicating optical fiber connection

operations, and intelligently managing optical splitters. Using iODN, customer can automatically find out

the target optical fiber and appropriately operate it, paving the way for massive FTTH rollouts.

xPON Series - ODN

The optical distribution network (ODN) is an indispensable path for transmitting FTTx data and directly

affects the performance, reliability, and scalability of an FTTx system. Huawei provides a comprehensive

series of ODN products to deliver fast ODN customization services to carriers worldwide.

Overview

Page 1

Series Product Series Full-series Product and Uniform Platform

ODF

FDT Outdoor FAT Indoor FAT Closure ATB

Buried Duct Aerial Air-blown Indoor multi-core Drop cable

Bare Splitter Bare Splitter Module Splitter Unit Splitter

Pigtail` Patch cord Adapter and other

Box

Optical Cable

Optical Splitter

Pigtail, Patchcord and Connector

Access 7-13