how to make a screw in solidworks step.1 open solidworks and select front plane then draw a circle with diameter you want step.2 extrude the circle give it the deepth you want and do a chamber in one face 5x45° it depends on your circle diameter step.3 draw a circle equal diameter to the first circle drawn on the face where you do a chamber then make helix 000001 i use revolution and patch
How to Make a Screw in Solidworks
Jan 16, 2016
tuto solidwork
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
how to make a screw in solidworksstep.1 open solidworks and select front plane then draw a circle with diameter you want
step.2 extrude the circle give it the deepth you want and do a chamber in one face 5x45° it depends on your circle diameter
step.3 draw a circle equal diameter to the first circle drawn on the face where you do a chamber then make helix
000001
i use revolution and patch
after draw helix , exit to skchet and draw a profile " a little triangle" on right plane or botton plane
stil
Related Documents
