8/14/2019 HLC Manual2008
1/34
HEAT LOADCALCULATING TOOLQUICK START MANUAL
8/14/2019 HLC Manual2008
2/34
Disclaimer Of Warranty On Sof twareThe software provided with this Manual is given to you as is without warranty of any kind, either
expressed or implied, including but not limited to the implied warranties of merchantability and
fitness for a particular purpose. Emerson Climate Technologies does not warrant, guarantee, or
make any representations regarding the use or the results of the use of the Soft ware Program in
terms of its correctness, accurac y, reliability, newness, or otherwise. In addition, Copeland does
not warrant that the functions contained in the Software Program will meet your requirementsor that the operation of the Software Program will be un -interrupted or error free. The entire
risk as to the quality, results and performance of the Software Program is assumed by you. Some
ju ri sd ic tions do not al low the exclusion of impl ied warranti es so the above exclusion may not
apply to you.
8/14/2019 HLC Manual2008
3/34
Quick Start Manual
I N T R O D U C T I O N
This software is developed by Emerson
Climate Technologies to assist in calculation
of heat of any building . It has weather data
of 44 countries in Asia. Easy step-by-step
input of building parameters allows OEMs
sales engineers to calculate the precise load
requirement and help them decide on an
optional system for building.
8/14/2019 HLC Manual2008
4/34
Quick Start Manual
A B O U T T H E M A N U A L
This Manual aims to provide the user suf cientinformation about the use of the Heat Load CalculatingTool (HLCT) developed by Emerson Climate Technologies.With the aid of this tool, engineers can compute the HeatLoad of any building and provide a summary of all Heat LoadComputations.
This Manual will help the user quickly adapt to the HLCT environment by providing step-by-step instructions on howto design a project, how to properly input data, and how topreview and print the summary of results.
8/14/2019 HLC Manual2008
5/34
Heat Load Calculat in g ToolQuick Star t Manual
Disclaimer
Introduction
About the Manual
ContentsSoftware Installations / Key GenerationHow to Use the ManualUser Environment and InterfaceHow to Enter Data
Creating a New Project.............................15Selecting Weather Data...........................16Entering Room Speci cation....................18Adding a New Room ...................19Calculating Conductivity Factor (k).........................21Material Selection...........................22
Calculate New Composite Material...................24Adding New Material to List...............25Design Room Temperature and Humidity..................26Load Time Scheduling.................................27Outside Wall, Outside Glass, Inside Wall Input Data ...........29Supplementary Load ......................30
How to Print / Preview DataList of all the factors / Nomenclature / symbols used
Emerson Climate Technologies contact information /Technical Support
Glossary
Index (Nomenclature)
8/14/2019 HLC Manual2008
6/34
Heat Load Calculator User Manual
6
Quick Start Manual
HOW TO USE THIS MANUAL
The following pages contain actual HLC T environment picturesthat will visually assist the user throughout the course ofthe Manual. For common understandi ng, please refer to thefigure below. The colored picture corresponds to the activescreen, while the black and white picture corresponds to theroot or previous screen.
Project Information Main Screen
HLCT Main Screen
Technical Suppor tFor queries regarding the Heat Load Calculating Tool, pleasesend us an e-mail at:
Or visit us at http://www.digitalscroll.com/
8/14/2019 HLC Manual2008
7/34
Heat Load Calculator User Manual
7
Quick Start Manual
SOFTWARE INSTALLATION
Installing your HLCT
To instal l the Heat Load Calculating Tool version 2.0,you must have administrat ive privileges. This step-by-stepManual will walk you through the instal lat ion process withease.
Step 1. Inst al lat ion Set-Up
After opening the instal ler, you will see the Heat LoadCalculating Tool Setup Main Screen. Read each page andthen click on the Next button to be directed through eachprocess.
Step 2. License Agreement
Read through the Terms and Condit ions outl ined in the EndUser License Agreement. Click Next to agree and proceedwith the instal lat ion.
Step 3. User Information
Type your name and your company name. Click Next toproceed with the instal lat ion.
8/14/2019 HLC Manual2008
8/34
Heat Load Calculator User Manual
8
Quick Start Manual
S O F T WA R E I N S TA L L AT I O NSOFTWARE INSTALLATION
Step 4. Choosing Destination Locations
By default , your H eat Load Calculating Tool will be instal led inyour Programs File folder located on your C : drive. To changethis, cl ick on Change , then click on Next to proceed w ith theinstal lat ion.
Step 5. Start of Instal lat ion
This will confirm all set up information and proceed withthe sof tware ins ta l la tion . Cl ick on Next to proceed with theinstal lat ion.
Step 6. Instal lat ion Progress
The instal ler program will begin adding the Heat LoadCalculating Tool to your computer. Do not interrupt theinstal lat ion unti l i t is complete.
Step 7. End of Instal lat ion
The Heat Load C alculating Tool has been loaded and ready foruse. To exit the instal lat ion set up, cl ick on Finish.
8/14/2019 HLC Manual2008
9/34
Heat Load Calculator User Manual
9
Quick Start Manual
K E Y R E G I S T R AT I O N
Activat ing your HLCT
For activation, please see instructions as stated in theActivation Screen shown below:
8/14/2019 HLC Manual2008
10/34
Heat Load Calculator User Manual
10
Quick Start Manual
G E T T I N G S TA RT E D
User Environment and Interface
Heat Load Calculating Tool Main Screen
1. Creates a new Project2. Opens an exist ing .mdbe Projec t3. Saves al l current Project Information4. Resets al l current Project information in the Heat
Load Calculating Tool database5. Opens the Project Information Screen6. Opens the Room Data Screen7. Opens the Preview and Print Screen8. Opens the About Screen9. Opens the Help Screen and a Sample Project Manual10. Closes the Heat Load Calculator
1098 2 43
1
5
6
7
8/14/2019 HLC Manual2008
11/34
Heat Load Calculator User Manual
11
Quick Start Manual
G E T T I N G S TA RT E D
Project Information Main Screen
1. Opens the Weather Data of 44 countries in A sia.2. Allows you to Change the Weather Data of the chosen
City.3. Accepts the Data and returns to the Heat Load Calculating
Tool Main Screen
2
3
1
8/14/2019 HLC Manual2008
12/34
Heat Load Calculator User Manual
12
Quick Start Manual
G E T T I N G S TA RT E D
Room Data Main Screen
1. Displays Room Specification and Factors used du ringComputation. This also al lows you to customize all buildingparameters.
2. Allows you to Revise exist ing Room Data3. Allows you to Delete exist ing Room4. Allows you to Create New or Copy Exist ing Room Designs
and add them in the Order List5. Accepts the Data and returns to Heat Load Calculating Tool
Main Screen6. The Order Lis t shows the l is t of Rooms, Room name, Floor,
and System7. Fil ters the Rooms based on the chosen Floor8. Displays the Room Number of selected Room
8
2
4
3
1
5
6
7
8/14/2019 HLC Manual2008
13/34
Heat Load Calculator User Manual
13
Quick Start Manual
G E T T I N G S TA RT E D
Print / Preview Main Screen
1. Sets the Standard u nits to be use d during computationand during printing
2. Selects the i tems to be viewed and printed3. Documentation and Details4. Prints the corresponding h ours ref lected in the Time
Schedule screen5. Displays Computation Results6. Accepts the Data and returns to the Heat Load Calculating
Tool Main Screen
2
4
3
1
5 6
8/14/2019 HLC Manual2008
14/34
Heat Load Calculator User Manual
14
Quick Start Manual
H O W TO I N P U T D ATA
Starting a ProjectYou can start a project by either creating a New Project oropening an exist ing .mdbe project .
Creat ing a New Project
1. Click New to start a New Project . This opens the ProjectInformation Screen.
2. Fil l up the Project Name and Project address3 . By Cl ickingOther Cit ies , you can either choose or customize
weather data
Project Information Main Screen
HLCT Main Screen
8/14/2019 HLC Manual2008
15/34
Heat Load Calculator User Manual
15
Quick Start Manual
H O W TO I N P U T D ATA
Selecting the Weather Data
1. Select from the Listed Locations on the left s ide of thescreen by choosing the Country, Province, and City
2. Click Select to accept the changes
* Please refer to the List of Nomenclature at the end of thisManual for more information.
Project Information Main Screen
Weather Design Data
8/14/2019 HLC Manual2008
16/34
Heat Load Calculator User Manual
16
Quick Start Manual
H O W TO I N P U T D ATA
Selecting the Design Data
1. From the Project Information Screen, cl ick Design Data2. By choosing Revise , you can change the data in the
spreadsheet by simply clicking on the cells3. To accept the changes, cl ick Confirm . To close the window
without saving the data, cl ick Exit .
Design Data
8/14/2019 HLC Manual2008
17/34
Heat Load Calculator User Manual
17
Quick Start Manual
H O W TO I N P U T D ATA
Input of Room Specifications
A large por tion of al l Heat Load Computations is based on theparameters entered in this part of the program.
Room Specifications include Bui lding Material Characterist ic,Factors, Design Room Temperature, Time, other Sources ofHeat, and more.
* Please refer to the List of Nomenclature at the end of thisManual for more information.
Room Data Main Screen
HLCT Main Screen
8/14/2019 HLC Manual2008
18/34
Heat Load Calculator User Manual
18
Quick Start Manual
H O W TO I N P U T D ATA
Adding a New Room
By choosing Add from the Room Data Main Screen, you caninsert a new Room to your current Project . Completely f i l l-up all Room Specification Details .
Rooms Specification:a. Identif ies the Room number. I t also corresponds to the
order that the Room was created.b. Th e name of the Roomc. The Floor where the Room is locatedd. Common air condit ioning system being used by multiple
condit ioned Roomse. The specific function of the Roomf. Floor Area of the Room in metric units (sq.m)g. Ceil i ng height of the Room in metric units (m)
b
Room Specification Main Screen
Room Data Main Screen
e
f
a
d
c
g
8/14/2019 HLC Manual2008
19/34
Heat Load Calculator User Manual
19
Quick Start Manual
H O W TO I N U T D ATA
Load Components:
Load Components are factors that affect Heat Transmissions.
If uncondit ioned areas are located above, below, or adjacentto the room being des igned, heat loads wi l l grea t ly vary.
Cei l ing ( in metr ic uni ts , sq .m)
a. Boiler Room area located above the condit ioned spaceb. Kitchen Room area located above the condit ioned spacec. Floor area located above the condit ioned space that is
exposed to outs ide a i rd. Interior f loor area above the condit ioned space that does
not have air condit ioning. (Ex. Corridors)e. Roof Area exposed to solar radiationf. Skylight area exposed to solar radiation. Skylights are
windows set into a ceil ing or roof that provide naturall ight ing.
Floor ( in metric units , sq.m and m)a. Boiler Room area located below the condit ioned spaceb. Kitchen Room area located below the condit ioned spacec. Uncondit ione d car park area located below the condit ioned
spaced. Floor area loca ted below the condit ioned s pace that is
exposed to outs ide a i re. Interior f loor area below the condit ioned space that does
not have air condit ioning. (Ex. corridors)f . For Lower Floor without basement levels, enter the Ground
or Ear th area under Lower Floor
For Lower Floor with basement levels, enter the BasementLevel Floor areag. Depth of each Basement Level
Equipment
a. Internal loads brought about by sensible heat generatedby indoor equipment
b. Internal loads brought about by latent heat generated byindoor equipment
c. Acceptable al lowance for Sensible heatingd. Acceptable al lowan ce for Latent heating
a
b
cd
a
bcdef g
a
bcdef
8/14/2019 HLC Manual2008
20/34
Heat Load Calculator User Manual
20
Quick Start Manual
H O W TO I N P U T D ATA
Calculating the Conductivity Factor (k)
This por t ion of the calculator al lows you to select or customizethe type of material that makes up the structural wall , roof,ceil ing, f loor an d others.
The Conductivity factor denoted by k is measured as:
The Shielding coefficient for Skylights and glass is denotedby Sc and S c (RF).
Conductivity Factor Main Screen
kcal m 2 -hr- o C
8/14/2019 HLC Manual2008
21/34
Heat Load Calculator User Manual
21
Quick Start Manual
H O W TO I N P U T D ATA
Material Selection for Walls, Roof, Floors and Ceil ings
By choosing Selection , you can choose from the HLCTdatabase specific construction types of various walls , roofs,f loors, and ceil ings.
1. Select composite material from the roll-down menu2. Equivalent k values and structure type are automatically
displayed3. Choose Select to accept the changes or Exit to ignore the
changes
Material Selection Screen
8/14/2019 HLC Manual2008
22/34
Heat Load Calculator User Manual
22
Quick Start Manual
H O W TO I N P U T D ATA
Material Selection for Skylight and Glass
By choosing Select ion , you can choose from the HLCT databasespecific construction types of Skylights and Outside Glass.
1. Select Window Type with its corresponding thickness from theroll-down menu
2. Select Curtain Type3. Equivalent K(OG) and Sc are automatically displayed4. Choose Select to accept the changes or Exit to ignore the
changes
Material Selection (Glass) Screen
8/14/2019 HLC Manual2008
23/34
Heat Load Calculator User Manual
23
Quick Start Manual
H O W TO I N P U T D ATA
Calculate New Composite Material
By choosing Calculation , you can create specific construc tioncomposite materials that wil l make up the walls , roofs, f loors,and ceil ings.
Sample Composite Wall = Tile, Mortar, Brick, Plaster
1. Select from the material l is t Tile2. Input the material thickness 9mm
3. To transfer the Tile to the spreadsheet , cl ick the Right pointer ar row .To remove the Tile from the spreadsheet , highlight the
Tile entry in the spreadsheet , and then click the Left pointer ar row
4. Continue data entry for the following materials: Mortar 40 mm
Brick 2 00 mmPlaster 3 mm
5. Click Cal K to view the K results6. Click Select to accept the changes
Calculation Screen
8/14/2019 HLC Manual2008
24/34
Heat Load Calculator User Manual
24
Quick Start Manual
H O W TO I N P U T D ATA
Adding a New Material to the List
In case the material you need is not included in the MaterialList , a ne w material can be created.
1. Click Add and type in the new material name.2. Enter the specific value of the new material at the entry
below the Material List .3. To add the new material to the Material List , cl ick Conf. To permanently remove any material from the Material
List , highlight the material and click Del .4. Click Select to accept the changes.
Calculation Screen
8/14/2019 HLC Manual2008
25/34
Heat Load Calculator User Manual
25
Quick Start Manual
H O W TO I N P U T D ATA
Design Room Temperature and Humidity
By choosing Temperature/Humidity , you can change thetemperature ( o C) and RH (%) that the condit ioned space isdesigned to maintain under the most extreme condit ions.
1. Enter the Summer Design Temperature2. Enter the Summer Design Relative Humidity3. Enter the Winter Design Temperature4. Enter the Winter Design Relative Humidity5. Click Confirm to accept the changes6. To reset the data to Default Design Values, cl ick Back to
Preset
Design Room TemperatureHumidity Main Screen
8/14/2019 HLC Manual2008
26/34
Heat Load Calculator User Manual
26
Quick Start Manual
H O W TO I N P U T D ATA
Load Time Scheduling
By choosing Time Schedule , you can assign the amount of internalheat (percentage, %) produced during particular time periods.
a. Operation Time denotes the exact hours when Lights, People orEquipment generate internal heat
b. Internal Heat Distribution Table: Column Amount of Internal Heat generated by Lights, People,
Indoor Equipment and its equivalent Time. (1-24 th hour 1 AM-12 Midnight)
Row Hourly Time Periodc. To accept the new Operation Time, click Timing Changed. To reset the data to Default Design Values, click Back to Preset e. To input new internal heat percentages, click Figure Changef. Click Confirm to accept the changes
b
Time Schedule Main Screen
a
c
d
e
f
8/14/2019 HLC Manual2008
27/34
Heat Load Calculator User Manual
27
Quick Start Manual
H O W TO I N P U T D ATA
Sample Internal Heat Gain Distr ibution:8-18 Hour, 50% Internal Heat Gain19-24 Hour, 100% Internal Heat Gain
1. Change Default Operation Time, from 8:00 18:00 to8:00-24:00
2. To accept the new time, cl ick Timing Change3. To manually change the percentages, cl ick Figure Change .
Input 50 on th e cells under Lights, Peop le, and Equipmentand during the t ime period 8:00-18:00
Time Schedule Main Screen
8/14/2019 HLC Manual2008
28/34
Heat Load Calculator User Manual
28
Quick Start Manual
H O W TO I N P U T D ATA
Outside Wall (OW), Outside Glas s (OG), Inside Wall (IW)Input Data
The posit ion of the building in reference to the sunsorientation greatly affects th e amount of heat gained throughvarious sides of the building.
At each directi on (N, NE, E, SE, S, SW, W, NW), wall and glassdimensions ( length and height) are measured in meters (m).
a. Dimension of outside wallb. Dimension of outside wall in earth Underground wall depth from the ground levelc. Dimension of outside glassd. Dimension of internal walle. Indicates whether the internal wall is adjacent to a boiler
room, kitchen, or a room facing outdoor airIf the internal wall is not adjacent to any of these rooms,use the option l ocated in interior area
f. Choose Select to accept the changesg. Choose Exit to ignore the changes
OW/OG/IW Input Data Main Screen
a
b
c
d
e
f
g
8/14/2019 HLC Manual2008
29/34
Heat Load Calculator User Manual
29
Quick Start Manual
H O W TO I N P U T D ATA
Other / Supplementary Load
In addit ion to the heat transmitted into the condit ionedspace through walls and air infi l trat ion, any heat gain fromother sources must be in cluded in the total coolin g / heatingload computation.
The infi l trat ion air amount, power consumption fromlighting, and people-generated heat is directly affected bythe func tion of each room.
a. Type of Venti lat ion System to be instal ledb. The amount of fresh air required for building occupantsc. Total Heat Exchanger Efficiency; Standard total heat
exchanger efficiency is 60%d. Amount (percentage) of infi l trated air during Summer and
Winter monthsStandard air infi l trat ion is 0.2 t ime air changes of total room
air volume.e. Power consumption of l ighting equipment measured in
Watt/sq.m.
f. Power consumption for equipments that consume power24 hours each day (Guaranteed Equipment heat)g. The reasonable nu mber of persons occupying the f loor
based on the declared floor area and specific roomfunct ion
h. Amount of sensible and latent h eat generated by theoccupants
cb
a
e
d
f
h
g
i j
k
8/14/2019 HLC Manual2008
30/34
Heat Load Calculator User Manual
30
Quick Start Manual
P R I N T I NG A N D P R E V I E W
Viewing and Pr in t ing a Projec t
The Heat Load Calculating Tool generates al l the necessaryheat load computation results al lowing you to view andreview them systematically.
By choosing Preview/Print , you can either view or print theproject result summary.
1. Select the unit (W or Btu/h) to be used.2. Mark which i tems to be viewed and printed.3. Fil l-up the Cover page details .4. Enter the Hours that you wish to Preview and Print . These
Times correspond to the Internal Heat Gain PercentageTime Schedule
5. Choose Preview/Print to display the summary of theresul ts
6. Choose Exit to ignore the changes
HLCT Main Screen
Preview / Print Main Screen
5 6
3
4
2
1
8/14/2019 HLC Manual2008
31/34
Heat Load Calculator User Manual
31
Quick Start Manual
P R I N T I NG A N D P R E V I E W
From the selection , cl ick on the buttons you want to previewand pr in t .
1 . Cover Page2. System Table3. Room Peak Load4. Room Data Details5 . Room Data (Walls)6 . System Peak Load7. Room Load Cooling8. Room Load Heating9. Building Load
Summary of Results
Preview / Print Main Screen
8/14/2019 HLC Manual2008
32/34
Heat Load Calculator User Manual
32
Quick Start Manual
G L O S S A RY
Summer DB Summer Dry Bulb Temperature C
The ambient or outdoor summer temperaturesamples for each country/cit y.
Summer RH Summer Relative Humidit y %
The summer relative humidity in relation to theSummer DB and atmospheric pressure.Ratio of water vapor in the air in relation to theamount needed to saturate the air at the sametemperature.
Summer X Summer Absolute Humility g/Kg (Dry Air)
The summer absolute humidity in relation to theSummer DB and atmospheric pressure.The mass of water vapor divided by the mass of dry airat a given temperature and volume of air.
Winter DB Winter Dry Bulb Temperature C
The ambient or outdoor wi nter temperature samplesfor each country/city.
Winter RH Winter Relative Humidity %
The winter relative humidity in relation to the WinterDB and atmospheric pressure.Ratio of water vapor in the a ir in relation to the amount
needed to saturate the air at the same temperature.Winter X Winter Absolute Humility g/Kg (Dry Air)
The winter absolute humidity i n relation to the WinterDB and atmospheric pressure.The mass of water vapor divided by the mass of dry air ata given temperature and volume of air.
K Thermal Conductivity /Conductivity Factor
Kcal m 2- hr-C
Preset or calculated K factors of composite(wall, floors, roofs, ceilings) and non-compositeconstruction materials.The rate of heat transfer through a material or
compound structural member with parallel walls.SC and S C ( RF ) Shielding Coeff icient n/a
The measure of how well glazing blocks solar h eatgain relative to 1/8 clear glass under the s ameconditions. The l ower the coefficient, the better theunit blocks solar heat.
8/14/2019 HLC Manual2008
33/34
Heat Load Calculator User Manual
33
Quick Start Manual
N O M E N C L AT U R E
Quantity Symbol Coherent UnitCeiling CL m
Conductivity Factor K Kcal / m 2-hr-C
Conductivity Ratio Kcal / m 2-hr-C
Floor FL m
Fresh Air Amount CMH m3 /hr
Guaranteed Internal
Equipment Power
GP Kcal / hr
Internal Wall IW m
Outside Glass OG m
Outside Wall OW m
Roof RF m
Safety Factor SF n/a
Shielding Coefficient Sc and S (RF) n/a
Summer AbsoluteHumidity
Summer X g/Kg(Dry Ai r)
Summer Dry BulbTemperature
Summer DB C
Summer RelativeHumidity
Summer RH %
Winter Absolute Humidity Winter X g/Kg(Dry Ai r)
Winter Dry BulbTemperature
Winter DB C
Winter Relative Humidity Winter RH %
8/14/2019 HLC Manual2008
34/34
Emerson Climate TechnologiesAsia Pacific Headquarters
10/F Pioneer Building
213 Wai Yip Street, Kwun TongKowloon, Hong Kong S.A.R.Tel: 852-28663108Fax: 852-25206227
Emerson Climate Technologies(Suzhou) Co., Ltd.
No. 69 Suhong West Road,Suzhou Industrial Park, Suzhou Jiangsu Provi nce, 21502 1P.R. ChinaTel: 86-512-62575505Fax: 86-512-62575506
Emerson Climate Technologies(Suzhou) Co., Ltd.Shanghai Representative Office
16/F Jiu Shi Tower28 Zhong Shan Road (South)Shanghai 200010, P.R. ChinaTel: 86-21-63330808Fax: 86-21-63330516
Emerson and Emerson Climate Technologies logo are trademarks and servicemarks of Emerson Electric Co. and are used with the p ermission of Emerson Electric
Co.
Heat Load Calculating Tool is a trademark and service mark of Emerson ClimateTechnologies, Inc. All other trademarks are the property of their respective owners.
2008 Emerson Climate Technologies, Inc. All rights reserved.
Emerson Climate Technologies(Suzhou) Co., Ltd.Guangzhou Representative Office
Room 1001, Dongshan Plaza,69 XianLie Zhong Road,Guangzhou 510095, P.R. ChinaTel: 86-20-87323008Fax: 86-20-87322568 Emerson Climate Technologies(Suzhou) Co., Ltd.Beijing Representative Office
Room 310, Canway Building,66 Nan Lishi Road, Xicheng DistrictBeijing 100045, P.R. ChinaTel: 86-10-68057825Fax: 86-10-68056301
This manual is for general guidelines only. For more information please contact anyof our representatives at: