This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
154
Anchor systems
Features■ Pre-assembled manual or electric
screw and body■ Can be set using a screwdriver or
hammer■ Only one anchor type required for
both solid and hollow materials
HPS-1 impact anchorA secure hold in concrete and hollow masonry
Base material■ Solid materials: Concrete, bricks, sand-lime blocks, P4.6 lightweight
HPS-1 setting tool for firm tightening/pulling down of part fastened or adjustment in special casesOrdering designation Item no.
Pozidrive no. 2 HPS-1 SWZ 216707*
* Not in normal stocking range.
142
Anchor systems
Versions offered:■ HSA – zinc plated (min. 5 microns)■ HSA-F – hot dipped galvanized (ISO 1461, 45 microns)■ HSA-R – A4 stainless steel (DIN 1.4401 / AISI 316)
Areas of application:■ Base material: concrete in the compression zone■ Versatile fastening through in-place parts like wood beams, metal
sections, columns, brackets, etc.■ Offered in a variety of length (to fit for every specific thickness of the
fastening part) and materials (to match specific corrosion requirements).
Approvals:■ European technical approval (ETA) – Option 8 for concrete in the
compression zone (zinc plated M6–M20, stainless M6–M12) –the anchor can therefore be used in all CE-countries.
■ Fire resistance – The anchor can be used where fire resistanceproove is required (for the zinc plated and stainless version –approved by the IBMB Germany)
Characteristics:■ Long thread, offering flexibility for special applications■ Two embedment depths marked, to ensure that the fastening is
done right on site. – Standard embedment: blue ring– Reduced embedment: thread end
■ Nut and washer pre-assembled for time saving on site
EDELSTAHL
Stainlesssteel
®
HSA standard stud anchorOffering a high level of flexibility for all applications in the compression zone of concrete.
■ Head ■ Ductility of the ■ Two embedmentmarking steel depths
HSA standard stud anchorHole-dia., Anchor Head Max. fastenable thickness Packaging Ordering Item no. Item no. Item no.
length, marking Standard, Reduced, contents designation Zinc plated Hot dipped Stainless(do) mm (l) mm (tfix) mm (tfix) mm (pcs) (min. 5 microns) (ISO 1461) (A4/AISI 316)
6 50 A – 5 200 HSA M 6× 50/ –/ 5 255830 338260* 332183*6 65 C 10 20 200 HSA M 6× 65/ 10/ 20 255831 337121* 3321846 85 D 30 40 100 HSA M 6× 85/ 30/ 40 255832* – 332185*6 100 E 45 55 100 HSA M 6×100/ 45/ 55 255833 – –8 57 B – 5 100 HSA M 8× 57/ –/ 5 255834 337122* 3321868 75 C 10 23 100 HSA M 8× 75/ 10/ 23 255835 337123* 3321878 92 E 27 40 100 HSA M 8× 92/ 27/ 40 255836* 337124* 332188*8 115 G 50 63 50 HSA M 8×115/ 50/ 63 255837 – 332189*8 137 H 72 85 50 HSA M 8×137/ 72/ 85 255838* 337125* –
As [mm] Stressed crossed-section 36.6 58.0 84.3 157.0 245.0 353.0
W [mm] Elastic moment of resistance 30 60 105 266 519 898
Mrec [Nm] Recommended bending moment without sleeve 12.5 24.9 43.7 111.0 216.4 374.2
HSL-3 Heavy-Duty Expansion Anchor
Maximum safety in dynamic applications and cracked concrete.HSL-3 combines the best features of proven HSL international and HSL-TZ in a single heavy-duty anchor, it at least matches and in mostcases improves – on their performance. It now has the strictestEuropean Technical Approval (ETA-02/0042) for best safety.
Base materials■ Concrete, cracked concrete■ Hard natural stone
Applications■ Fastening heavy loads, e.g. from columns, machines, apparatus etc.,
also in cracked concrete■ Dynamic conditions, e.g. with vibratory or windy conditions■ Any heavy-duty application where extensive approvals coverage is
required
Application areas■ Nuclear power projects ■ Power generation■ Telecom ■ Tunneling■ Heavy industrial ■ Stadiums■ Infrastructure ■ Roof/building structures
Material■ Steel strength 8.8 with rolled thread, zinc plating at least 5 microns thick■ A4 stainless steel (material 1.4401 / AISI 316)
Main features■ Black plastic section
– no turning in hole during setting– collapses for flush baseplate-to-surface fit
■ Choice of five head types (see next page for detail)■ HSL-3-B, pictured requires no torque wrench for setting. The red cap
shears off with correct torque, revealing a tamper-proof green seal■ Embedment depth mark for easy setting■ Extensive range of approvals and technical back-up
HST safety stud anchorOffering a high level of safety and suiting a broad range of requirements and applications.
Versions offered:■ HST – zinc plated (min. 5 microns) ■ HST-R – A4 stainless steel (DIN 1.4401 / AISI 316)■ HST-HCR – DIN 1.4529 high corrosion resistant
Areas of application:■ Base material: concrete in the tensile and compression zone, hard
natural stone■ Fastening through in-place parts e. g. angles, tracks, channels,
beams etc.■ Special programme in HCR material – 1.4529 for applications
where high corrosion resistance is required, like street tunnels orswimming pools (high concentration of chlorides)
Approvals:■ European technical approval (ETA) – Option 1 for concrete in the
tensile and compression zone (zinc plated M8–M24, stainlessM8–M24) – the anchor can therefore be used in all CE-countries.
■ German approval (DIBt) – for material 1.4529 – high corrosion resistant (HCR), diameters M8–M16
■ Fire resistance – The anchor can be used where fire resistance isrequired (approved by the IBMB Germany – all offered sizes and materials)
■ Shock approval – Switzerland – BZS for civil defence shelters – all offered sizes and materials
■ Sprinkler systems – approved by VDS and FM
Characteristics:■ Embedment depth marked (black ring) to ensure that the fastening is
done right on site.■ Nut and washer pre-assembled for time saving on site■ Approved for cracked concrete
The anchor is approved for applications in thetensile zone of concrete according to the European building codes (CE) and cantherefore be used in the tensile andcompression zone.
■ Edge and spacing distanceThe small permitted edge and spacingdistances allow design flexibility, even withnarrow structural members.
■ Ductility of the steelDue to the manufacturing process which isdone with cold-forming technology, the anchormaterial remains ductile. The result is ananchor which allows alignments withoutbreaking.
HST-HCR, stainless steel (HCR, high corrosion resistant material as per DIN 1.4529)Hole dia., Anchor length, Max. fastenable thickness, Packaging Ordering Item no.(do) (l) (tfix) contents designation Stainlessmm mm mm (pcs) (HCR 1.4529)
8 75 10 20 HST-HCR M 8/10 308784*8 95 30 20 HST-HCR M 8/30 308785*
Base material■ Concrete■ Natural stone■ Brick■ Sand-lime brick etc.
Use■ Many fastenings using commercially available wood screws
Material■ High-quality polyamide PA 6
* Not in normal stocking range.
118
Anchor systems
HVU adhesive capsuleHole With external With internal Hole Package Ordering designatio Item no.depth, thread Hole dia., thread diameter, contentsho (mm) HAS, HAS-R do (mm) HIS-N, HIS-RN do (mm)
80 HAS M 8 10 – – 10 HVU M 8× 80 25669190 HAS M10 12 HIS-N M 8 14 10 HVU M10× 90 256692
110 HAS M12 14 HIS-N M10 18 10 HVU M12×110 256693125 HAS M16 18 HIS-N M12 22 10 HVU M16×125 256694170 HAS M20 24 HIS-N M16 28 5 HVU M20×170 256695210 HAS M24 28 HIS-N M20 32 5 HVU M24×210 256696240 HAS M27 30 4 HVU M27×240 256697*270 HAS M30 35 4 HVU M30×270 256698*300 HAS M33 37 4 HVU M33×300 256699*330 HAS M36 40 2 HVU M36×330 256700*360 HAS M39 42 2 HVU M39×360 256701*Storage temperature 5° to 25°C
trel tcure
1 2 3 4
5 6 7
Lasting fastening reliability■ A virtual odourless resin system containg no
styrene■ Good flow properties and surface wetting■ Unaffected by temperature and weather, in any
season or climatic zone■ Excellent and constant anchor holding power
due to a new resin system and a larger amountof quartz granules
■ Good fire resistance properties
Enclosed in foil (notglass), the adhesive iseasier to use on site.No breakage.
Flexible foil capsule adapts its shape to suit each hole.����������yy����������yyBarbs at the tip of the foilcapsule prevent it fromdropping out of holes foroverhead fastenings.����������yy�����y�����y
HVU adhesive anchorBase material■ Concrete■ Hard natural stone
Use■ Heavy-duty fastenings with small spacing and edge distances■ Suitable for making fixings underwater (contact Technical Advisory
Service for details)
System■ Consisting of adhesive in a foil capsule and an anchor rod or internally
threaded sleeve
Approved for use
in contact with portable
(clean), drinking water
117
Anchor systems
Optimised and tested for fatigue properties under dynamic loading.
HVZ adhesive anchorThe first adhesive anchor with foil capsule for use in cracked concrete
Reliable: the application■ Cracked tension zone of concrete components■ Dynamic loading, such as fatigue, shock and seismic■ Small edge distances and spacing
Reliable: the handling■ Quick and easy setting operation■ Accurate fastening design with Hilti software■ Insensitive to frequently made application errors, e.g. poor hole
cleaning
Reliable: the performance■ Automatic follow-up expansion if cracks form■ High loading resistance, even in cracked concrete or when edge
distance and spacing are small■ Rods in various grades of steel and sizes for a wide variety of
applications
Setting tools for HVA and HVZ (anchor rods with external hexagon)For use with Suitable for machine
Ordering designation with with TE-6 TE-16M TE-35 TE-56 TE-76 Item no.HAS-(R) HAS-(R) TZ TE-16 TE-16C
HDA-P 20-M10×100/20 331544* 16 HDA-T 20-M10×100/20 331545* 20 Dynamic Set M10 369201*HDA-P 22-M12×125/30 331546* 25.5 HDA-T 22-M12×125/30 331548* 30 Dynamic Set M12 369202*HDA-P 22-M12×125/50 331547* 45.5 HDA-T 22-M12×125/50 331549* 50 Dynamic Set M12 369202*HDA-P 30-M16×190/40 331550* 37 HDA-T 30-M16×190/40 331552* 40 Dynamic Set M16 369203*HDA-P 30-M16×190/60 331551* 57 HDA-T 30-M16×190/60 331553* 60 Dynamic Set M16 369203**Not in normal stocking range
131
Anchor systems
(1400 ml)
Hilti HIT-RE 500For professional fastening of reinforcing bars
Reliable■ Very high loading values with reinforcing bars in a wide
range of diameters (8 to 40 mm dia.)■ Optimum working time in the extended temperature range from
- 5 to + 40°C ■ Suitable for use in holes drilled using diamond coring equipment,
rotary hammers, pneumatic drills ■ Low sensitivity to oversized holes, dusty and wet holes■ Red coloured adhesive for easy checking of proper setting on site■ Comprehensive technical data for effective fastening design
Convenient■ Well proven, self-opening foil pack system■ Low dispensing force for quick and easy work■ Wide range of dispensers for different requirements
Environmentally friendly■ Reduced waste due to unique foil pack■ Odourless adhesive
Features■ The new adhesive ensures
reliable fastening, even whenholes are drilled using diamond coring equipment orpneumatic drills, are poorlycleaned, wet or oversized
■ Convenient dispensing toolsfor different requirements
Ordering designation Packaging unit (pcs) Item no.
HIT-RE-M static mixer 1 337111suitable for foil pack and jumbo cartridge
HIT-EXT 9/1000 24632Length: 1000 mm, External diameter: 9 mm
HIT-EXT 16/700 352011*Length: 700 mm, External diameter: 16 mm
Setting operations
Drill hole. Brush out hole. Blow out dust.
Fill hole from bottomupwards.
Insert rebar. Allowadhesive to cure.
Pour concrete.
1 2 3
4 5 6
Base material temperature OC twork / tgel t cure , ini tcure , fu
-5 4h 36h 72h0 3h 25h 60h5 2h 12h 24h20 30 min 6h 13h30 20 min 4h 8h40 12 min 2h 4h
HLC-H Version: with washer and hexagon boltThread Max. fastenable thickness, Drill bit diameter, Anchor length, Min. hole depth, Ext. diameter Package Ordering designation Item no.size tfix do l h1 D contents
HLC sleeve anchorsFor general medium-duty fastenings
Base materials■ Concrete, solid bricks, sand-lime blocks
Uses■ Fastening through in-place parts e.g. handrails, angles, brackets, timber
parts
Material■ Steel, galvanised to 5 microns
do
l
tfix
Tinst
ho
* Not in normal stocking range.
159
Anchor systems
HLDHole dia., (solid material) Length of anchor neck Base material thickness, Screw shank dia., Package Ordering designation Item no.do h d contents(mm) (mm) (mm) (mm)