Logging into Haxorware This book is intended to be a manual for Haxorware which is a custom cable modem firmware. This is a legal firmware change. This book is NOT intended to demonstrate or condone any illegal practices. DO NOT add information to this book regarding ANY theft of service as ModemPremodz.net does not support nor condone anything in that fashion! Enjoy your purchase. Power and RJ-45 only Plug in the only the RJ-45 cable from your modem to your PC’s NIC card and power the modem down. If using a laptop make sure to turn off the wifi to not disrupt your configuration by blocking the IP address needed. Then, plug in the power to the modem after this and NEVER plug in the coaxial wire until you have you modem configured properly and ready to test. Reason is because you need to make sure the firmware upgrade feature is disabled so it does not overtake your firmware before you have a chance to even look at it to configure. GUI Access via Browser Once you’re all plugged up and ready your PC or end device should have received an IP address (usually up to 1 minute). Once this is done, simply open your browser of choice, and enter “192.168.100.1” without the quotes. Hit enter and from there you should see your settings and ready for configuration, congratulations. ****Troubleshooting ****Some report issues logging into the modem, if your modem does not get an IP address please set your NIC card manually. To do so: 1. Get to the network settings (if you needs specifics we can support PC or MAC any OS just e-mail support). 2. Open the IP settings and change the NIC from dynamic to static. 3. Set the Gateway to 192.168.100.1 and the IP address to 192.168.100.x (x being anything under 255). Set the Subnet mask to 255.255.255.0 although it will do it automatically on some OS’s. 4. Retry to Access the GUI via browser. If you have tried this and still having issues contact [email protected]with your PayPal Transaction ID immediately. If you are not a customer of ModemPremodz please do not waste your time. Settings Factory Mode - This forces the modem to behave as if it was supplied by the ISP and bypasses customs settings. Disable Firmware Upgrades - This option will force Haxorware to ignore new modem firmware pushes from the ISP. Un-checking this could compromise your Haxorware install and overwrite your firmware. Force Network Access Tries default settings to login.
19
Embed
Haxorware Tutorial for SB5101 (works on compatible modems)
Basic guide for starters in the scene wanting to get use to the haxorware firmware. Sold at www.modempremodz.net for sale - shipped same day as payments received.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Logging into Haxorware
This boo k is intend ed to b e a manual for H axo rw are whi c h is a cus tom c able mo de m f i rmw are. T his is a le g al
f irmware chan ge. T his boo k is NOT in tend ed to de monstrate or condon e any i l le gal prac ti ces . DO NOT ad d
information to this boo k re garding ANY theft o f se rvi ce as M ode mP re mo dz.ne t does no t su pport no r con done
any thing in that f as hion! Enjoy you r purc has e.
Power and RJ-45 only Plug in the only the RJ-45 cable from your modem to your PC’s NIC card and power the modem down. If
using a laptop make sure to turn off the wifi to not disrupt your configuration by blocking the IP address
needed. Then, plug in the power to the modem after this and NEVER plug in the coaxial wire until you
have you modem configured properly and ready to test. Reason is because you need to make sure the
firmware upgrade feature is disabled so it does not overtake your firmware before you have a chance to
even look at it to configure.
GUI Access via Browser Once you’re all plugged up and ready your PC or end device should have received an IP address (usually
up to 1 minute). Once this is done, simply open your browser of choice, and enter “192.168.100.1”
without the quotes. Hit enter and from there you should see your settings and ready for configuration,
congratulations. ****Troubleshooting
****Some report issues logging i nto the modem, if your modem does not get an IP address
please set your NIC card manually. To do so:
1. Get to the network settings (if you needs specifics we can support PC or MAC any OS just e-mail support).
2. Open the IP settings and change the NIC from dynamic to static.
3. Set the Gateway to 192.168.100.1 and the IP address to 192.168.100.x (x being anything under 255). Set the Subnet
mask to 255.255.255.0 although it will do it automatically on some OS’s.
4. Retry to Access the GUI via browser.
If you have tried this and still having issues contact [email protected] with your PayPal Transaction ID immediately. If
you are not a customer of ModemPremodz please do not waste your time.
Settings Factory Mode - This forces the modem to behave as if it was supplied by the ISP and bypasses customs
settings.
Disable Firmware Upgrades - This option will force Haxorware to ignore new modem firmware
pushes from the ISP. Un-checking this could compromise your Haxorware install and overwrite your
firmware.
Force Network Access Tries default settings to login.