1 izzyplus.com/harter 855.321.izzy March, 2015 Harter Price Guide October, 2014 revised March, 2015 For most up-to-date pricing, please refer to our price guides found at izzyplus.com/resources/pricing The Harter Price Guide contains far more than just prices—in fact a whole range of information is provided to answer your questions and assist you with placing your order. If you need more help, please contact Customer Service at 855.321.izzy or visit us online at izzyplus.com/harter.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
For most up-to-date pricing, please refer to our price guides found at izzyplus.com/resources/pricing
The Harter Price Guide contains far more than just prices—in fact a whole range of information is provided to answer your questions and assist you with placing your order. If you need more help, please contact Customer Service at 855.321.izzy or visit us online at izzyplus.com/harter.
2 izzyplus.com/harter 855.321.izzy March, 2015 2
izzyplus.com/harter 855.321.izzy March, 2015 3
Contents
InformationProduct Directory 4-7Mechanical Definitions 8Mechanism Availability 9Order Information 10Quick Ship 10SCS Indoor Advantage 10Product Number 11Prices and Terms 12Warranties and Standards 13COM and COL 14Finishes, Base Options and Casters 15Materials 16 TablesLayla 26 Penny 42Harter Shapes 44 Harter Work Table 56
Lounge Harter Forum 118Harter Forum Ottoman 120Harter Forum Wood 122Harter Forum Wood Ottoman 124Harter Forum Benches 126Harter Forum Tables 128 Truman 132 Truman Bench 134Truman Tables 136
4 izzyplus.com/harter 855.321.izzy March, 2015
Product Directory Tables
Layla
pages 24-39
Penny
pages 40-41
Harter Work Table
pages 54-55
Harter Shapes
pages 42-53
5izzyplus.com/harter 855.321.izzy March, 2015
Product Directory Seating
Anthro Accord & Anthro Accord Stool
pages 58-61
Anthro KB & Anthro KB Stool
pages 62-65
Arc & Arc Stool
pages 74-85
Anthro KB Side & Anthro KB Side Stool
pages 66-69
Anthro Upholstered Back & Anthro Upholstered Back Stool
pages 70-73
Cyclus
pages 92-93
Clio & Clio Stool
pages 88-91
Calliope
pages 86-87
Lassiter
pages 94-95
6 izzyplus.com/harter 855.321.izzy March, 2015
Product Directory Seating
Wallaby
pages 110-111
Harter Step
pages 108-109
Harter Sling
pages 102-107
Meet
pages 96-97
Olivia
pages 98-99
Quest
pages 100-101
7izzyplus.com/harter 855.321.izzy March, 2015
Product Directory Lounge
Truman
pages 130-131
Truman Bench
pages 132-133
Harter Forum
pages 116-117
Harter Forum Ottoman
pages 118-119
Harter Forum Benches
pages 124-125
Harter Forum Wood Harter Forum Wood Ottoman
pages 120-121 page 122-123
Harter Forum Tables
pages 128-129
Truman Tables
pages 134-135
8 izzyplus.com/harter 855.321.izzy March, 2015
Mechanical Definitions
Mech. Name Code Illustration Function Category
Synchro Front Tilt NSeat & back tilt at 2:1 ratio, seat has
rear tilt and 360º swivel, back has rear tilt,
7 locking positions.
Seat angle: -1° to 17°
Seat back angle: 94° to 100°
Synchro Knee Tilt LSeat & back tilt at 2:1 ratio, seat has rear tilt
& 360º swivel, back has rear tilt w/ 6 position
back angle, integrated seat & back lock 6
positions.
Seat angle: 2° to 9°
Seat back angle: 93° to 102°
Multi Task PSeat angle:Seat back angle:Front tilt:
Posture Back HIndependent back movement, 360º swivel,
back tilts to rear, back lock 1 position.
Back angle: 13°
Intensive Task G Seat & back tilt at 2:1 ratio, seat has front & rear
tilt & 360º swivel, back has front & rear tilt,
integrated seat and back lock any position.
Seat angle: 3° to 9°
Seat back angle: 99.5° to 114.5°
Swivel Only D 360º swivel, fixed seat and back.
Knee Tilt CFixed seat to back, tilts to rear and swivels
360º. Locks in upright position.
Swivel Tilt AFixed seat to back, tilts to rear and swivels
360º. Locks in upright position on most
models.
Action
Action
Action
Action
Action
Action
Action
Action
9izzyplus.com/harter 855.321.izzy March, 2015
Mechanism Availability
Mech. Name Anthro
Accord
Anthro KB
and UB
Calliope Lassiter Sling Step Wallaby
Synchro Front Tilt (N)
Synchro Knee Tilt (L)
Multi Task (P)
Posture Back (H)
Intensive Task (G)
Swivel Only (D)
Knee Tilt (C)
Swivel Tilt (A) X X X
(No tilt
lock.)
X
(No tilt
lock.)
X X X
(No tilt
lock.)
X X X X
X X
X X
X
(stool only)
X
(XL only)
X
X X
Meet
X
(No tilt
lock.)
X
X
(stool only)
10 izzyplus.com/harter 855.321.izzy March, 2015
Order Information
SCS Indoor Air Advantage
Environmental AttributesOur products are made in the USA from sustainable designs, materials and manufacturing processes. The environment is important to us—and we know it’s important to you—which is why we are committed to BIFMA level® certification and supporting healthy indoor air quality through the SCS Indoor Advantage & Advantage Gold™ standards.
Please submit your order by one of the following means:
MAIL: izzy+ Attn: Customer Service 11451 Harter Drive Middlebury, IN 46540
All orders need to include:• Purchaser’s name, address, phone number, and a contact person in both locations• Receiver’s name, address, and phone number (if different) and a contact person in both locationsHarter’s Customer Service Department is available to assist you with your order. Contact Customer Service at: 855.321.izzy
All orders must contain the following information:
• Quantity & Model Number• Fabric & Colorway• Frame Finish• Caster Type
EXAMPLE: Quantity & Model No. > 1 - G98G58 Fabric & Colorway > Maharam Metric Scuba Frame Finish > P10 Black Caster Type > Hard Casters
See pages 14-17 to specify Fabric & Colorway. If chair options are desired, add the appropriate suffix to the model number. EXAMPLE: To add Relocatable Arms Quantity & Model No. > 1 - G98A78RA Fabric & Colorway > Maharam Metric Scuba Frame Finish > P10 Black Caster Type > Hard Casters
Order verifications will be issued approximately 48 hours after order receipt. Please review acknowledgments carefully and notify Harter immediately if any changes must be made. Please review Prices & Terms Condition of Sale for further information concern-ing changes.
5-Day Quick ShipAnthro Accord and Anthro KB are available on 5-Day Quick Ship. To place a Quick Ship order, simply select any Quick Ship designated model, pair with a Grade 1 or 2 izzy+ flavors textile, and follow the ordering procedure below.
QUICK SHIP TERMS AND LIMITATIONS• Maximum order of 25 chairs.• Orders must be marked Quick Ship.• No cancellations.• No changes to orders. Chair Model # Chairs shipped per CartonAnthro KB Side ................................1Arc...................................................1Arc Stacker ......................................2Calliope side ....................................1Clio ..................................................4Cyclus..............................................4Olivia N29F40...................................1Quest ...............................................3Sling ................................................1Wallaby side .....................................1
Note: COM (Customer’s Own Material) fabric products can be ordered on the Quick Ship Program. Orders will ship within 10 working days from the date our factory receives the backed COM. Orders requesting Harter to Purchase COMs will be scheduled after receipt of backed COM.
For more information on Harter products, visit us at our Web site: izzyplus.com
11izzyplus.com/harter 855.321.izzy March, 2015
Product Number
Product Number Scheme The Harter Number scheme is as follows:
EXAMPLE:
Gas Lift, Anthro Accord, Intensive Task, Low Back Med. Scale, T-Arm
G 98 G 5 8
Height Adjustment
Gas Lift G
Mechanical Spin Lift H
No Height Adj. N
GL High Base Stool S
Tables T
Seating Line
Cyclus 21
Quest 27
Olivia 29
Arc 55
Lassiter 64
Harter Step 67
Harter Forum 68
Truman 68
Harter Sling 70
Meet 82
Wallaby 89
Calliope 93
Clio 94
Colleague 95
Anthro Accord / KB 98
Function
Swivel Tilt A
Knee Tilt C
Swivel Only, Fixed Ht. D
Sled Base E
Leg Chair F
Intensive Task G
Posture Back H
Independent Seat & Back I
Synchro Knee Tilt L
Synchro Front Tilt N
Multi Task P
Size
High Back, Lg Scale 0
Mid Back, Lg Scale 1
Low Back, Lg Scale 2
High Back, Med. Scale 3
Mid Back, Med. Scale 4
Low Back, Med. Scale 5
Med Back, Med. Scale 6
Large Back, Med. Scale 7
Small Back, Small Scale 8
Arm Style
Open Arm 0
Box Arm 1
Loop Arm 2
Armless 3
Loop Arm w/ Uph. Cap 4
Open Arm w/ Uph. Insrt 5
Cantilever/Basic Arm 6
T Arm 8
Metal w/cap 9
Tablet T
G 98 G 5 8
12 izzyplus.com/harter 855.321.izzy March, 2015
Prices and Terms
Prices & TermsList prices shown apply to product only. Storage, sales tax and any installation charges are additional. All orders are shipped freight prepaid within the contiguous United States and Canada. Freight charges will be the responsibility of izzy+. FOB point is izzy+’s factory. The title of goods passes to the purchaser and our responsibility ceases when the carrier accepts shipment at our manufacturing facility.
Prices in effect when the order is received will apply. If the shipping date requested exceeds six (6) months from the order receipt, izzy+ may use the published list prices effective at the shipment date. Payment is due according to our invoice terms. In the event of delinquency, the customer shall be liable for reasonable collection costs, including attorney fees. If, in the judgment of izzy+, the financial condition of the purchaser at any time during the period of the agreement does not justify the previously agreed payment terms, izzy+ may require full or partial payment in advance.
Prompt Payment Terms: 1% 10 Days, Net 30 Days.
Canadian CustomersAll prices listed are in United States (U.S.) Dollars. Customs charges are prepaid; however the Purchaser is responsible for GST tax. Contact Customer Service for current exchange rate.
International CustomersAll prices listed are in United States (U.S.) Dollars. All freight, taxes, and export fees are the Purchaser’s responsibility.
OrdersSend purchase orders to:
izzy+ Order Entry11451 Harter DriveMiddlebury, IN 46540
Orders shall be deemed accepted by izzy+ only upon issuance of our written acknowledgment. All orders are subject to izzy+’s terms and conditions of sale. izzy+ is not required to accept changes to acknowledged orders. The customer will be charged for any expenses related to accepted changes, and the order may then be rescheduled at izzy+’s discretion. Fax orders are final as taken. The customer accepts responsibility for supplying correct information and should carefully check all acknowledgments.
CancellationsIf the customer terminates an order without izzy+’s consent, izzy+ may charge the customer for the portion of the order completed at the date of termination, plus the amount of profit lost on the remaining portion of the order. Custom items are not cancelable.
ReturnsEach izzy+ product is manufactured according to the customer’s exact specification; therefore, returns are not accepted. izzy+ will consider the return of parts that have been incorrectly ordered by the customer. Please note that any return of parts requires the prior approval of Customer Service and will be subject to a restocking fee.
Shippingizzy+ reserves the right to ship by what is, in izzy+’s opinion, the best way. Merchandise may be delivered at one time or in partial shipments. Customer bears the risk of loss or damage during shipment. izzy+ is not liable for delay or failure to deliver or perform due to strikes, lockouts, or other labor difficulties, failure or delay of sources to supply, transportation difficulties, accidents, fires, acts of God, or other causes of like or unlike nature beyond izzy+’s control. We reserve the right, if the customer is unwilling or unable to accept delivery when the order is ready for shipment, to invoice the cost of the order, plus shipping, dispatching, insurance, warehouse expenses, and handling. izzy+’s responsibility ceases when the transportation company issues its receipt to us. If the shipment arrives damaged, the receiver should request that the delivering carrier inspect the shipment and note the details of all damage on the freight bill. If damage is discovered while unpacking, the transportation company should be contacted immediately for an inspection of the shipment, and request a written concealed damage report. The receiver must enter a claim with the transportation company within fifteen (15) days after shipment receipt. Crating material or cartons should be saved until the inspection. Receiver is responsible for filing freight claims.
Small Order FeeA small order fee of $40 Net will apply on orders less than $800 List.
13izzyplus.com/harter 855.321.izzy March, 2015
Warranties and Standards
Furniture Warrantyizzy+ warrants that its standard contract furniture products are free from defects in material and workmanship during normal use (normal use is defined as a maximum of eight (8) hours per day, six (6) days per week (single shift)), for the lifetime of the furniture, with the exception of the following:
Storage and non-adjustable legs are warranted for ten (10) years; gas lifts, exposed wood, screens, adjustable legs, adjustable mechanisms and glides for five (5) years; upholstery material for three (3) years, and glass is warranted for one (1) year.
Seating Warrantyizzy+ warrants that its standard contract seating products are free from defects in material and workmanship during normal use (normal use is defined as a maximum of eight (8) hours per day, six (6) days per week (single shift)), for the lifetime of the chair, with the exception of the following:
Gas cylinders, controls, and functional parts are warranted for ten (10) years; arm caps, casters, backliners, and exposed wood parts (finished wood chairs and wood base caps) for five (5) years; and upholstery materials (foam, mesh) are warranted for three (3) years.
Customer’s Own Material/Leather (COM/COL) is not covered by this or any other izzy+ warranty.
Multi-shift applications will change the warranty on ten (10) year items to six (6) years; five (5) year items to three (3) years; and three (3) year items to one (1) year. The warranties stated above apply to the original purchaser only.
Excluded from warranty is product that has unauthorized modifications, or if the customer fails to perform normal maintenance service on the product, this includes, but is not limited to, lubrication and cleaning, minor assembly and adjustment and periodic operational checks. Natural variations occurring in wood are not considered defects; izzy+ does not warranty the colorfastness or matching of color, grain or texture, normal wear and tear, or damages resulting from shipping or storage.
This warranty does not include defects from normal wear and tear, accidents, negligence, abuse, shipment, handling, storage, or environmental conditions. Any modifications to izzy+’s contract seating products by the purchaser, purchaser’s employees or agents, voids this warranty. izzy+ reserves the right to reasonably determine whether a defect in material or workmanship occurred in normal use or if such defect resulted from a factor excluded from this warranty. Normal use is defined as a maximum of eight (8) hours per day, six (6) days per week (single shift). If a defect in material or workmanship is determined to have occurred in normal use during the warranty period, the defective product will be repaired or replaced free of charge, at the option of izzy+. The expressed warranties contained herein are in lieu of all other warranties, expressed or implied, including any warranty of merchantability and fitness for a particular purpose, and all other warranties arising from the course of dealing or usage of trade. Any action to enforce this warranty must be brought within three (3) months from the time an alleged defect in material or workmanship first occurs.
Repair or replacement of any defective izzy+ contract seating product for the period of time provided, shall constitute complete fulfillment of all the liabilities of izzy+, whether the claims of the purchaser are based in contract, in tort, (including negligence and/ or strict liability) or otherwise, with respect to, or arising out of,
the product furnished hereunder. izzy+ is not liable for any special or consequential damages under this warranty. The remedies provided above are the purchaser’s sole remedies for any failure of izzy+ to comply with its obligations regarding the material and workmanship of its seating products.
Service PartsService parts are warranted for one (1) year from defects in material and workmanship from the date of replacement or for the remainder of the original product warranty, whichever is greater.
International Customer WarrantyOne (1) year on parts.Freight will be paid to Port of Exit. Labor is excluded.
Customer’s Own Material Warrantyizzy+ does not warrant the appearance, behavior or durability of customer furnished upholstery materials (known in the furniture industry as COM/COL). The acceptance of the COM/COL by izzy+ only means that initial application of the COM/COL utilizing existing manufacturing processes was successful and does not imply that izzy+ warrants the COM/COL or its performance during use. izzy+ is not responsible for COM/COL appearance, condition, performance, durability, colorfastness or any other physical attribute of the COM/COL.
StandardsA variety of standards exists for office furniture. ANSI/BIFMA standards for seating test the furniture’s structural soundness and durability. All izzy+ contract seating meets or exceeds ANSI/BIFMA standards. California Technical Bulletin 133 (CAL TB133) is a fire test for furniture designed to be used in certain high-risk environments. Most izzy+ contract seating products can be manufactured to meet CAL TB133 regulations.
MaterialsSince textiles vary in weave, thickness and memory, some creasing and/or gathering may occur during the upholstery application process. Due to natural variations over which we have no control, all furniture is sold subject to minor irregularities of color, surface, grain and texture. Textiles are sold subject to minor variations of color. Leather upholstery materials are of the finest quality. Because leather is a natural product, variations of texture are common and should be expected. Leather will contain natural markings such as neck wrinkles, scratches, backbone marks and stretch marks. These distinctions give leather its unique characteristics and are considered to be a part of the natural beauty of leather.
Exclusive DesignAll furniture shown in this catalog is our property, and we reserve the exclusive right to manufacture it. izzy+ reserves the right to make changes in design and/or construction without prior notice.
Environmental ProtectionThe environment is important to us. We know it’s important to you, which is why we are committed to BIFMA level(R) certification and supporting healthy indoor air quality through the SCS Indoor Advantage & Advantage Gold(TM) standards. Our products are proudly made in the USA. To learn more about our journey to be more sustainable including our Annual Corporate Responsibility Report, visit www.izzyplus.com/environment. Product specific environmental information can be found within the product page in the resource download section (Environmental Product Summary).
izzyplus.com/harter 855.321.izzy March, 201514
COM and COL: Customer’s Own Material / Leather
Fabric ApprovalAll fabric must be evaluated and approved for use on izzy+ seating products.
Pre-Approved COM Fabricsizzy+ has evaluated and pre-approved over 1,000 COM/COL materials produced by more than 100 different manufacturers. Please contact our Customer Service Department or check our website at izzyplus.com/services for a complete list of pre-approved fabrics/leathers.
Backing of COM FabricsLatex or acrylic backing is required for all COM upholstery fabrics. If a fabric arrives at izzy+ and is not backed, a handling charge of $26 net, plus $3.00 net per yard will be applied to each COM order. If izzy+ is to back the COM, a minimum of 5 yards is required and the fabric must be exactly 54” wide.
Fabric EvaluationFabric not already approved must be evaluated. A 12” x 12” fabric sample must be mailed to:
izzy+
Customer Service 11451 Harter Drive Middlebury, IN 46540
YardagePrice guide yardage estimates are approximate. Requirements are based on 54” usable width plain fabric for one chair. Additional yardage may be required for patterned material. Fabrics greater than or less than 54” wide, or less than 6 yards, cannot be backed by izzy+ and must be backed by the purchaser. For yardage requirements on 30 chairs or more or on patterned repeats, call customer service. Leather requirements based on 55 sq. ft. usable hide.
Shipping COM Fabric
All shipments must note: • Dealer/Customer Name, Order Number, • Yardage Shipped, Fabric Application • Direction, Exterior Fabric Face.
Ship approved fabric freight prepaid to: izzy+
COM Department 11451 Harter Drive Middlebury, IN 46540
Fabric sent COD or freight collect will not be accepted.
California Technical Bulletin 133 (CAL TB133)Any COM fabric to be used in a CAL TB133 application must be shipped with written certification of fire retardant treatment. The customer is responsible for having a fire retardant treatment added to the COM prior to shipment to izzy+.
Manufacturing ScheduleCOM/COL orders will be scheduled for manufacturing and a shipping date issued after the factory receives all COM/COL for the order. If your order requires partial or split shipment, please contact customer service.
Warrantyizzy+’s ten (10), five (5), and three (3) year warranties do not cover COM/COL. COM/COL is not covered by any izzy+ warranty.
Conditionsizzy+ will inventory COM/COL for one month. COM/COL pricing may increase if material requires extra backing or labor. Any COM fabric purchased by izzy+ on behalf of a customer will be inspected at the time of production to ensure it meets izzy+’s upholstery standards. izzy+ will notify customers if the fabric fails to meet those standards.
izzy+ will assume that any COM fabric purchased by a customer and shipped to izzy+ has been inspected by that customer and has been approved for use. Customers indemnify and hold izzy+ harmless against all claims for damage or injury to property or persons by reason or failure of COM/COL to be merchantable, fit, or safe for use. izzy+ is not responsible for COM/COL wear, defects, or appropriateness.
izzy+ is not responsible for COM’s received with bow and skew issues. It’s assumed that the fabric vendor has shipped izzy+ usable fabric. COM is not inspected for bow and skew upon arrival, it is determined at the point of manufacturing the product. If a COM has bow and skew issues (regardless of whether izzy+’s vendor backed the fabric or it was received with backing), the customer will be contacted to have the fabric vendor issue an RA for pick up of the skewed fabric and ship replacement fabric to izzy+. At that point, the order will be unscheduled. It will be rescheduled upon receipt of replacement COM.
izzyplus.com/harter 855.321.izzy March, 2015 15
Materialss
Wood FinishesWhen ordering, specify finish number. Table Veneers: AJ Maple (natural stain on Maple veneer) AK Sand (on quarter sawn white oak) AL Oak (clear on quarter sawn white oak) AM Cherry (on quarter sawn white oak) AN Mahogany (on quarter sawn white oak) AO Walnut (on quarter sawn white oak) AP Anthracite (on quarter sawn white oak) AQ Wenge (on quarter sawn white oak) Seating Veneers: BJ Maple (on beech) BK Sand (on beech) BB Beech (clear on beech) BM Cherry (on beech) BN Mahogany (on beech) BO Walnut (on beech) BP Anthracite (on beech) BQ Wenge (on beech) BI Opaque White (on maple for Cyclus, Arc, Sling and Forum)
Note: Special order Wood base finishes are available for $125 net, per special stain sample. Special order side chair finishes are available for $350 net per order. Matching lead times 3 weeks.
Tablet Arm LaminatesTablet Arms cannot be stacked or ganged, nor can they be added in the field. Refer to individual product for proper edge detail. When ordering, specify finish letters and colorway:
Tablet Arm Laminates and T-Mold Edges: LAS Black LDQ Platinum LBT Dover White LCB Earth LDM Pearl LDA Citadel LB4 Folkstone LCD Graphite
Tablet T-Molds: V37 Black V36 Citadel V35 Graphite V39 Earth
Frame Finishes
P06 Silver P10 Black P07 White P11 Alloy P08 Oatmeal P54 Mirror P09 Charcoal P55 Polished
Casters
HARD WHEEL:Recommended for use on soft flooring such as carpets and carpet tiles. Will match frame finish color. If no caster is specified, hard casters will be provided.
SOFT WHEEL:
Recommended for use on hard flooring such as wood or linoleum. Will match frame finish color.
Table Tops and Edge Options
3form Chroma: CD Camel CF Sassy CG Cranberry CV Sea CI Ghost CS Surf CQ Moss CZ Violet CU Marmalade
Evolving Woodgrains/Markerboard LCG Millennium Oak LCY Dunewood LCC Smoky Brown Pear LZ7 White Ash LCR Oiled Walnut LZ8 Weathered Ash LCT Zebrano LZ9 Natural Ash LCX Chestnut Woodline
Veneer with Matching ApplePly or Lumber Edge:
AJ Maple (natural stain on Maple veneer) AK Sand (on quarter sawn white oak) AL Oak (clear on quarter sawn white oak) AM Cherry (on quarter sawn white oak) AN Mahogany (on quarter sawn white oak) AO Walnut (on quarter sawn white oak) AP Anthracite (on quarter sawn white oak) AQ Wenge (on quarter sawn white oak)
Thermoplastics
Core T11 Swan T15 Falcon T12 Raven T16 Dove T13 Blue Heron T17 Woodpecker Red T14 Jay
Classic T18 Purple Martin T22 Parakeet T19 Peacock T23 Oriole T20 Macaw Blue T24 Cardinal T21 Goldfinch T25 Flamingo
Table Tops/3form® Glass
CONSTRUCTION:3form® pressed glass tops are 0.50" thick and feature a top and bottom chamfered, polished edge. Square and rectangle tables have a corner radius of 0.25". The interior color is pressed between clear glass and backed with a white out layer. The glass is mounted to the table base with a 0.75" thick particleboard substrate. The particleboard substrate permanently bonds to the glass with a double-sided 3M tape product. The substrate is pre-drilled for mounting and is shipped with complete instructions and positioning template for installation in the field. The standard size substrate is 16" in diameter, except on those tables noted below.
CONSTRUCTION:3form® Chroma tops are 1" thick and feature a top and bottom 1/8" radius. Square and rectangle tables have a corner radius of 1/8". The izzy+ Chroma product has a “C3” color film that is laminated to the bottom side of the clear Chroma material and backed with an opaque white layer (called White Out) to prevent the table base from showing through the table top. Top layer: 1" Chroma clear, 2nd layer: 12 mil C3 color layer, 3rd layer: C3 color layer White Out. The top surface finish is always Renewable Matte and the edges are always polished. The Chroma is mounted to the table base with a 0.75" thick particleboard substrate. The particleboard substrate permanently bonds to the glass with a double-sided 3M tape product. The substrate is pre-drilled for mounting and is shipped with complete instructions and positioning template for installation in the field. The standard size substrate is 16" in diameter, except on those tables noted below.
Vertical corner .13" radius – on square and rectangle tops
1" thick with .13" radius on top and bottom
CLEAR CHROMA
C3 COLOR LAYER
WHITE OUT
18 izzyplus.com/harter 855.321.izzy March, 2015
Upholstery
Upholsteryizzy+ is pleased to offer this specially crafted upholstery collection, along with our partners – Camira, Maharam, MomentumTextiles, KnollTextiles, Ultrafabrics and Greenhide Leather – all part of our izzy+ flavors collection. For memo samples, please contact the manufacturer directly at:• Camira – 317.484.0305 or order online at www.camirafabrics.com/samples• Maharam – 800.645.3943 or order online at www.maharam.com• Momentum Textiles – 800.366.6839 or order online at www.memosamples.com• Knoll Textiles – 866.565.5858 or order online at www.knolltextiles.com• Ultrafabrics – 914.460.1722 or order online at www.ultrafabricsllc.com• Greenhides Leather – 336.315.9720 or order online at www.greenhides.com
izzy+ flavors Textiles Collection – Grade 1PATTERN COLOR PRODUCT EXCEPTIONS
izzy+ flavors Textiles Collection – Grade 2PATTERN COLOR PRODUCT EXCEPTIONS
izzy+ flavors Textiles Collection – Grade 3PATTERN COLOR PRODUCT EXCEPTIONS
izzy+ flavors Textiles Collection – Grade 3PATTERN COLOR PRODUCT EXCEPTIONS
Messenger Fossil Messenger Cloud Messenger Bayou Messenger Onyx Medium Delight Medium Port Medium Prospect Medium Pumpkin Medium Laser Medium Nautical Medium Pistachio Medium Pool Medium Marina Medium Alloy Medium Bark Medium Smoke Medium Raven Metric Cerise Metric Fleece Metric Tupelo Metric Pollen Metric Lava Metric Cardinal Metric Alligator Metric Envy Metric Scuba Metric Seaport Metric Fog Metric Anchor Metric Mineral Metric Bittersweet Metric Sourdough Metric Oriole Metric Twilight Metric Tar
Graded-In izzy+ flavors Textiles CollectionPATTERN COLOR PRODUCT EXCEPTIONS
C.F. StinsonStat-Con 5
CarnegieIcon Call for pricing Lineage Call for pricing Spot On Call for pricing Trestle Call for pricing Sequence A 5
CamiraBlazer 5 Blazer Lite 4 (Vertical Surface) Craggan Call for pricing Denim 5 Hebden 5 Hemp 4 Monroe 5 Sting Call for pricing
KnollTextilesAbacus 5 Cat’s Cradle 4 Century Call for pricing Charm Call for pricing Dovetail Call for pricing Eclat Weave Call for pricing Felt Call for pricing Ferry 4 Fibra Call for pricing Hopsack 5 Hourglass 3 Jubilee Call for pricing Mini Stitch Call for pricing Monarch 5 Ricochet Call for pricing Rivington Call for pricing Soliloquy 3 UpholsterySoliloquy 4 Vertical Surface Sonnet 3 Spot On Call for pricing Stacks 4 Star Struck Call for pricing Ultrasuede Call for pricing Zipline 4
MaharamAgency Call for pricing Anagram Call for pricing Chime (vinyl) 5 Anthro Accord, WallabyCrew 466149 Call for pricingDandy Call for pricing SlingDingbats Call for pricing Disperse 466017 5 Epingle Stripe Call for Pricing Medium 3Messenger 3Metric 3Micro (vinyl) 4 WallabyMilestone 3Octave 466116 Call for pricing Paver 466111 Call for pricing MeetRepeat Dot Ring Call for pricing Salon Call for pricing Sling Skein 466170 4 Meet Stripes by Paul Smith Call for pricingWafer 5
SpinneybeckVerona 5 Volo 5
Graded-In izzy+ flavors Textiles CollectionPATTERN COLOR PRODUCT EXCEPTIONS
Upholsterys
24 izzyplus.com/harter 855.321.izzy March, 2015
Upholstery
Graded-In izzy+ flavors Textiles CollectionPATTERN COLOR PRODUCT EXCEPTIONS
Graded-In izzy+ flavors Textiles CollectionPATTERN COLOR PRODUCT EXCEPTIONS
Layla 26 Penny 42Harter Shapes 44 Harter Work Table 56
26 izzyplus.com/harter 855.321.izzy March, 2015
Table Top
Veneer: .025” thick veneer over .9375” thick MDF with .025” thick backer. Grain direction for X and C base tables is parallel to the table depth. Veneer is quartered Oak except Maple which is shown on composite Obeche veneer. Knife edge with matching 2mm edge and stained mdf through the recessed section. Stain is same as specified on top. Grains do not match at seams.
Laminate: .028” thick laminate on .9375” thick MDF surface with .028” thick HPL backer. Knife edge with 2mm edge and black stained mdf through the recessed section.
Markerboard: .028” thick markerboard laminate on .9375” thick MDF surface with .028” thick HPL backer. Knife edge with 2mm edge and black stained mdf through the recessed section. Markerboard surface is for dry-erase markers only. Polished surfaces such as the markerboard will show scratches and wear sooner than matte laminates. Not recommended for high-use applications.
Table Base
Table base is available in 6 finishes. Yoke and Foot are specified together. The vertical leg is specified independently. Yoke and Foot are die-cast aluminum. Vertical leg is extruded aluminum.
Glides: Adjusts .5” for uneven floorsPlastic glides are standard and felt glides are optional
Raceway: Standard for all C-leg tables and X-leg tables larger than the 102x54. Door is powder-coated extruded aluminum and available with or without the perforated leaf pattern. The raceway underneath the table top is powder-coated matte black steel. Allows power and data wires to pass horizontally though the table, to the base.
Power and Power Data Options
Power Options: Power and Data ports are mounted flush to a black powder-coated plate mounted flush within the raceway. 6-outlets.
Power/Data Options: 3 power outlets, and a space to accommo-date (2) 3.5” single height Extron Architectural Adapter Plates (AAP) brackets. These can be found in the power & accessories section of the price guide. AAP brackets are shipped and installed separately. These can be added or modified at a later time.
Empty Options: raceway without power or power/data accommodates optional Storage Tray.
The 20-amp hardware and corded infeeds contain a modular power connector on the end that connects into a union referred to as “H-block.” Infeed type must be specified separately uopon order submission. The power and power/data modules have a modular power connector that also connects to the H-block. Power is distributed between power and power/data modules from this union through a jumper(s) – included.
15-amp power infeed: available on some configuration through the custom modification process. Contact customer service.
20-amp corded power infeed: plug several power and/or power/data modules into this infeed. This infeed is 10’ long, and plugs into the power source via 20-amp plug. UL Recognized.
20-amp Hardwire infeed: plug several power and/or power/data modules into this infeed. This infeed is 10’ long, and connects directly to the power source. Licensed Electrician required for installation. UL Listed.
Capacity: Table capacity is an estimate only, and will vary based on chair selection.
yoke
vertical leg
foot
Raceway Configuration Each code represents the configuration for the entire table. Example shown with 102x54 table.
XX EP PW PD DT SP SD None Empty Power Power & Power/Data Single Single(solid table top) Data Mixed Power Power/Data
1. Empty 1. 1. 1. 1. Empty 1. Empty
2. Empty 2. Empty 2. Empty 2. 2. 2.
3. Empty 3. 3. 3. 3. Empty 3. Empty
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Layla Tables
27izzyplus.com/harter 855.321.izzy March, 2015
Features
Storage Tray
Modesty Panel
Extron Architectural
Adapter Plate
Design by Barbara Ambrosz and Karin Santorso, Lucy.D Design
Product Number $ Charge Notes
LA STORAGE $84 black plastic insert holds decorations,
beverages, pencils,etc
black powder-coated aluminum frame, covered with black mesh
LA12498MP 2,370 for 12498 table
LA124124MP 3,160 for 124124 table
LA126176MP 3,687 for 126176 table
LA144144MP 3,864 for 144144 table
LA165165MP 4,564 for 165165 table
LA126202MP 6,145 for 126202 table
LA70-60902 166 One USB A Female to A Female Barrel
One RJ-45 Female-to-Female Barrel - Data
LA70-61602 240 One HDMI Female-to-Female Barrel
One 15-pin HD Female-to-Female Barrel and
LA70-16111 342 3.5mm Stereo Audio Jack for connection
to 15-pin Male-to-Male Cables with Audio
allowing remote connection to Inferface
LA70-10173 218 One 15-pin HD Female-to-Female
Gender Changer connection and 3.5mm
Stereo Mini Jack to Solder Tabs
LA70-491-11 213 Two Data RJ-45 Female-to-Female Barrel -
CAT 5e
LA70-67712 240 One DisplayPort Female to one
DisplayPort Female on 10" Pigtail
LA70-41111 117 One Voice RJ-11 Female-to-Female
Barrel - phone
LA70-09001 59 Blank Plate - Single
LA70-090-12 84 Blank Plate - Double
Layla Accessories
28 izzyplus.com/harter 855.321.izzy March, 2015
Power
Power/Data
Product Number T8353 T8353 T8353 T8353 T8353
Quick Ship - - - - -
Seating Capacity 6-8 6-8 6-8 6-8 6-8
Dimensions
Width 83" 83" 83" 83" 83"
Depth 53" 53" 53" 53" 53"
Height 29" 29" 29" 29" 29"
A 26.75" 26.75" 26.75" 26.75" 26.75"
B 39.375" 39.375" 39.375" 39.375" 39.375"
C 21.625" 21.625" 21.625" 21.625" 21.625"
Raceway None Empty Power Power & Power/Data Configuration Data Mixed
Table Top 1. Empty 1. Power 1. Power 1. Power/Data
Only 2. Empty 2. Empty 2. Power/Data 2. Empty
Surface Materials
Veneer, Knife Edge 5537 5752 6391 6893 6253
Laminate, Knife Edge 4963 5176 5816 6318 5677
Markerboard 5229 5443 6083 6584 5944
Layla – 83 x 53
Profile& Plan View
Tables
With Raceway None OptionTable Top only
1 2
Design by Barbara Ambrosz and Karin Santorso, Lucy.D Design
A
B C
Optional Features & Upcharges
Plastic Glides
Felt Glides
Hardwire Infeed
20 Amp Infeed
Storage Tray
Suffix $ Change Quick Ship Notes
GL — — —
FG +32 — —
HW +315 — —
20 +394 — —
see page 27 +84 — ordered separately
29izzyplus.com/harter 855.321.izzy March, 2015
Design by Barbara Ambrosz and Karin Santorso, Lucy.D Design
Power
Power/Data
None OptionTable Top only
Layla – 102 x 54
Profile& Plan View
With Raceway
1 2 3A
B C
Product Number T10254 T10254 T10254 T10254 T10254 T10254 T10254
Quick Ship - - - - - - -
Seating Capacity 6-8 6-8 6-8 6-8 6-8 6-8 6-8
Dimensions
Width 102" 102" 102" 102" 102" 102" 102"
Depth 54" 54" 54" 54" 54" 54" 54"
Height 29" 29" 29" 29" 29" 29" 29"
A 27" 27" 27" 27" 27" 27" 27"
B 59" 59" 59" 59" 59" 59" 59"
C 21.625" 21.625" 21.625" 21.625" 21.625" 21.625" 21.625"
Raceway None Empty Power Power & Power/Data Single Single Configuration Data Mixed Power Power/Data
Table Top 1. Empty 1. Power 1. Power 1. Power/Data 1.Empty 1. Empty
only 2. Empty 2. Empty 2. Empty 2. Power/Data 2. Power 2. Power/Data
see page 27 — C-Leg tables only, ordered separately
41izzyplus.com/harter 855.321.izzy March, 2015
Product Number Scheme The Harter Number scheme is as follows:
EXAMPLE:
1 2 3 4 5 6 7 8 9 10 11
Tables Size 83"x53" Surface Material Top 2mm Edge Foot Vertical Plastic Raceway Raceway Infeed Veneer Color NA & Yoke Leg Glide Door Configuration Configuration with Knife Edge Maple Polished Black Perforated Power/Data Black
T 8353 VSE AJ 24 GL55 PF PD
Surface Material
Veneer VSELaminate LBE
Markerboard MBE
Veneer
Maple AJ
Sand AK
Oak AL
Cherry AM
Mahogany AN
Walnut AO
Anthracite AP
Wenge AQ
Laminate
Core Group
Black LAS
Dover White LBT
Pearl LDM
Folkstone LB4
Platinum LDQ
Earth LCB
Citadel LDA
Graphite LCD
Classic Woodgrain
Fusion Maple LTS
Monticello Maple LSV
Huntington Maple LS2
Wild Cherry LXW
Versailles Anigre LS4
Empire Mahogany LTW
Montana Walnut LVK
Hemlock LT6
Classic Patterns
White Nebula LXR
Grey Nebula LT7
Graphite Nebula LT0
Pewter Mesh LRC
Grey Mesh LRP
Sheer Mesh LRQ
Steel Mesh LRT
Gilded Mesh LRZ
Evolving Woodgrains
Millennium Oak LCG
Smoky Brown Pear LCC
Oiled Walnut LCR
Zebrano LCT
Chestnut Woodline LCX
White Ash LZ7
Weathered Ash LZ8
Natural Ash LZ9
Non-Standard Laminatespecify manufacturer name and code number. Additional up-charge and extended lead times may apply.
Markerboard
White Markerboard MB
2MM Edgeband
White E30
Neutral White E31
Folkstone E33
Platinum E32
Earth E39
Brown E38
Citadel E36
Graphite E35
Black E37
Satin Silver E34
Fusion Maple E41
Monticello Maple E42
Huntington Maple E43
Wild Cherry E44
Versailles Anigre E45
Empire Mahogany E40
Montana Walnut E47
Hemlock E46
Foot & Yoke FinishSilver P06
White P07
Oatmeal P08
Charcoal P09
Black P10
Alloy P11
Polished P55
Vertical Leg FinishSilver P06
White P07
Oatmeal P08
Charcoal P09
Black P10
Alloy P11
Polished P55
Glide OptionPlastic Glides GL
Felt Glides FG
Raceway DoorPerforated Black (P10) PF
Non-Perforated Black(P10) NP
Perforated Silver (P06) PB
Non-Perforated Silver (P06) NB
Raceway ConfigueationRefer to raceway configura-tion options for each model/size.
None - solid table top XX
Empty EP
Power PW
Power & Data Mixed PD
Power/Data DT
Single Power SP
Single Power/Data SD
Infeed ConfigurationRefer to infeed configuration options for each model/size.
Hardwire HW
20-am plug in 20
Product
Tables T
Size
X-Bases
83x53 8353
102x54 10254
122x55 12255
161x56 16156
220x56 22056
280x60 28060
339x60 33960
C-Legs
124x98 12498
124x124 124124
126x176 126176
144x144 144144
165x165 165165
126x202 126202
HW
Tables Layla
42 izzyplus.com/harter 855.321.izzy March, 2015
T69F12FH
Rectangle
Design by Joe Ricchio and Matt Duncan
Tables Penny
Height
Top View
Front View
Side View
Product Number
Quick Ship
Dimensions
Width
Depth
Material
Laminate, urethane edge
20"
15"
26" (glides)
273⁄4" (casters)
T69F14FH
Oval
649 649
20”
15”
26" (glides)
273⁄4" (casters)
izzyplus.com/harter 855.321.izzy March, 2015 43
FH CST 69 LBT U04 P54F 12
Aluminum base and vertical column
Laminate w/ urethane edge: surface 3/4” thick; high pressure laminate on particleboard core; molded urethane edges; specify colors
Glides standard, casters available at an upcharge. Casters add 1-3/4” in overall height.
PF — — Polished finish is standard unless otherwise specified
Height Adjustment
Table T
Product LinePenny 69
Base Style Leg Base F
Top StyleRectangle 12
Oval 14
AdjustabilityFixed Height FH
Surface Material w/ Edge
Laminate
Core Group
Black LAS
Dover White LBT
Pearl LDM
Folkstone LB4
Platinum LDQ
Earth LCB
Citadel LDA
Graphite LCD
Classic Woodgrain
Fusion Maple LTS
Monticello Maple LSV
Huntington Maple LS2
Wild Cherry LXW
Versailles Anigre LS4
Empire Mahogany LTW
Montana Walnut LVK
Hemlock LT6
Classic Patterns
White Nebula LXR
Grey Nebula LT7
Graphite Nebula LT0
Pewter Mesh LRC
Grey Mesh LRP
Sheer Mesh LRQ
Steel Mesh LRT
Gilded Mesh LRZ
Solid UrethaneWolf U02
Dolphin U04
Otter U05
Black Bear U06
Hippo U22
Koala U25
Kangaroo U26
Oyster U27
Beaver U32
Frame OptionsSilver P06
White P07
Oatmeal P08
Charcoal P09
Black P10
Alloy P11
Polished (standard) P55
Evolving Woodgrains
Millennium Oak LCG
Smoky Brown Pear LCC
Oiled Walnut LCR
Zebrano LCT
Chestnut Woodline LCX
Dunewood LCY
White Ash LZ7
Weathered Ash LZ8
Natural Ash LZ9
Non-Standard Laminatespecify manufacturer name and code number. Additional up-charge and extended lead times may apply.
44 izzyplus.com/harter 855.321.izzy March, 2015
Table Tops/Laminate, VeneerConstruction: Tops are 1” thick and constructed with a lami-nate, or veneer face, 100% recycled particle-board core, then edged and backed with moisture-resistant coverings to form a completely sealed outside surface. Tops are shipped pre-drilled for easy assembly to bases.
Material:Table Top Laminate: Wilsonart, and Formica in various
patterns and colors. Wood veneer and solids: European steamed
Edging Wood trim, ApplePly®, laminate self-edge, or 2mm ABS.
Core Particle board, MDF, or ApplePly (plywood).Backer Moisture-resistant material, such as Polyback
(phenolic resin paper), to provide stable, bal-anced construction.
Finish: Veneer Maple is a natural stain on maple species. All
others are stained on quarter sawn white oak. Edging Wood stained (if applicable) and clear-coated ApplePly®: clear-coated.
Table Tops/GlassConstruction: 3form® pressed glass tops are 7/16” thick and feature a rounded, polished edge. The interior color is pressed between clear glass and backed with a white out layer. The glass is mounted to the table base with a 3/4” thick particle board substrate. The particle board substrate permanently bonds to the glass with a double-sided 3M tape product. The substrate is pre-drilled for mounting and is shipped with com-plete instructions and positioning template for installation in the field. The standard size substrate is 16” in diameter, except on those tables noted below.
Table Top Size Substrate Size Rectangle: 30”x54”, 36”x54”, 42”x54”, 42”x60” 18” x 30” rectangleRacetrack: 30”x54”, 36”x54”, 42”x54”, 42”x60” 17” x 38” ovalOval: 33”x54”, 36”x60” 17” x 38” oval
Material: Glass Annealed, multi-layered safety glass with
permanent center color layer and rounded, polished edges.
Table Tops/ResinConstruction: 3form Chroma tops are 1” thick, feature 1/8” radius edges that have been beautifully polished with ghosted backing.
Chroma surfaces are mounted to the table base utilizing a 3/4” thick particle board substrate. The particle board permanently bonds to the Chroma with a double-sided 3M tape product. The substrate is pre-drilled for mounting and is shipped with complete instructions and positioning template for installation in the field.
Material:Chroma Chroma is an eco-friendly resin-based material
with a renewable matte finish. Chroma colors have a ghosted back to provide an opaque design hiding both the substrate and the mounting hardware.
Tables Harter Shapes – Construction Details
45izzyplus.com/harter 855.321.izzy March, 2015
Table Bases
Material:RoundDisc Base Base: 3/8” thick laser-cut steel plate column: 3” O.D. x 14 gauge steel tube on
17”, 22” and 25” round bases column: 4” O.D. x 14 gauge steel tube on
28” and 32” basesOval Disc Base Base: 3/8” thick laser-cut steel plate column: 3” O.D. x 14 gauge steel tube on
17” x 23” and 20” x 32” bases column: 4” O.D. x 14 gauge steel tube on
22” x 38” basesDome Base Base: cast iron with 18 gauge steel cover column: 3” O.D. x 16 gauge steel tube on
17”, 22”, and 25” disc bases column: 4” O.D. x 16 gauge steel tube on
28” basesX Base Base: 2” O.D. x 14 gauge steel tube column: 2” O.D. x 14 gauge steel tube on
22” and 26” bases column: 3” O.D. x 16 gauge steel tube on
32” and 36” bases
Finish:Disc Bases Mirror or powder coat paint in Dome Base various colorsX Base
Glides:Disc Bases Non-adjustable urethane pads(Round and Oval)Dome Base Non-adjustable urethane padsX Base Adjustable screw levelers
Harter Shapes – Construction Details
46 izzyplus.com/harter 855.321.izzy March, 2015
X Base is optional. See Optional Base Selections below.
Dome Base is optional. See Optional BaseSelections below.
Harter Shapes – Square
Profile
Product Number T112424__ T113030__ T113636__ T114242__ T114848__ T115454__ T116060__
Table Dimensions
Width 24” 30” 36” 42” 48” 54” 60”
Length 24” 30” 36” 42” 48” 54” 60”
Height 29” 29” 29” 29” 29” 29” 29”
Surface Materials
Pricing includes Disc Base,
29” ht., Painted
Veneer, Lumber Edge 1194 1315 1556 1640 1687 NA NA
Veneer, Wood Edge 1346 1477 1805 1900 2026 NA NA
Veneer, ApplePly Edge 1365 1590 2041 2093 2170 NA NA
Glass and ResinGlass, Finished Edge GChroma, Polished Edge CHA
Veneer
Maple AJ
Sand AK
Oak AL
Cherry AM
Mahogany AN
Walnut AO
Anthracite AP
Wenge AQ
Laminate
Core Group
Black LAS
Dover White LBT
Pearl LDM
Folkstone LB4
Platinum LDQ
Earth LCB
Citadel LDA
Graphite LCD
Classic Woodgrain
Fusion Maple LTS
Monticello Maple LSV
Huntington Maple LS2
Wild Cherry LXW
Versailles Anigre LS4
Empire Mahogany LTW
Montana Walnut LVK
Hemlock LT6
Classic Patterns
White Nebula LXR
Grey Nebula LT7
Graphite Nebula LT0
Pewter Mesh LRC
Grey Mesh LRP
Sheer Mesh LRQ
Steel Mesh LRT
Gilded Mesh LRZ
Evolving Woodgrains
Millennium Oak LCG
Smoky Brown Pear LCC
Oiled Walnut LCR
Zebrano LCT
Chestnut Woodline LCX
Dunewood LCY
White Ash LZ7
Weathered Ash LZ8
Natural Ash LZ9
Non-Standard Laminatespecify manufacturer name and code number. Additional up-charge and extended lead times may apply.
Glass – 3form
Camel GD
Cranberry GG
Ghost GI
Moss GQ
Marmalade GU
Sassy GF
Sea GV
Surf GS
Violet GZ
Resin – 3form Chroma
Camel CD
Cranberry CG
Ghost CI
Moss CQ
Marmalade CU
Sassy CF
Sea CV
Surf CS
Violet CZ
2MM Edgeband
White E30
Neutral White E31
Folkstone E33
Platinum E32
Earth E39
Brown E38
Citadel E36
Graphite E35
Black E37
Satin Silver E34
Fusion Maple E41
Monticello Maple E42
Huntington Maple E43
Wild Cherry E44
Versailles Anigre E45
Empire Mahogany E40
Montana Walnut E47
Hemlock E46
Base StyleDome Base D
Disc Base F
X-Leg Base X
Café Height Disc CF
Café Height Dome CD
Table Base FinishSilver P06
White P07
Oatmeal P08
Charcoal P09
Black P10
Alloy P11
Mirror P54
Product
Tables T
Shapes-Rectangle
42x48” 4248
42x54” 4254
42x60" 4260
42x72" 4272
42X64" 4284
42x96" 4296
* Wood edge finish is stained to match top.** Wood edge finish is clear.*** Must select 2mm edge color.**** Laminate self edge is the same as the laminate selection.
56 izzyplus.com/harter 855.321.izzy March, 2015
Work Table
T68F1520__
Design by Timothy deFiebre
Tables Harter Work Table
Top View
Front View
Product Number
Quick Ship
Dimensions
Width
Depth
Height
Surface Materials
20”
15”
26”
708
563
Veneer, ApplePly¨ Edge
Laminate, ApplePly¨ Edge
57izzyplus.com/harter 855.321.izzy March, 2015
T 68
3⁄4” and 1” tubular steel
Laminate w/ ApplePly¨ edge: surface 3⁄4” thick; high pressure laminate on ApplePly¨ core; ply edges exposed with clear finish; Veneer w/
ApplePly¨ edge: surface 3⁄4” thick rift cut; slit-matched beech veneer in 8 stains; ply edge is always clear
Harter Work Table
Mirror finish standard; painted frame optionalStandard Features
Product Number &
Function Upcharges
Construction
Frame
Surfaces
Optional Features
Painted Frame
F 1520 VPE AQ
Suffix $ Change Quick Ship Notes
PF — — Mirror finish is standard unless otherwise specified.
Height Adjustment
Table T
Functions
Leg Base F
Size
15”X20” 1520
Seating Line
Harter Work Table 68
Surface Material w/ Edge
Veneer, ApplePly¨ VPE
Laminate, ApplePly¨ LPE
Veneer
Maple AJ
Sand AK
Oak AL
Cherry AM
Mahogany AN
Walnut AO
Anthracite AP
Wenge AQ
Surface Material w/ Edge
Laminate
Core Group
Black LAS
Dover White LBT
Pearl LDM
Folkstone LB4
Platinum LDQ
Earth LCB
Citadel LDA
Graphite LCD
Classic Woodgrain
Fusion Maple LTS
Monticello Maple LSV
Huntington Maple LS2
Wild Cherry LXW
Versailles Anigre LS4
Empire Mahogany LTW
Montana Walnut LVK
Hemlock LT6
Classic Patterns
White Nebula LXR
Grey Nebula LT7
Graphite Nebula LT0
Pewter Mesh LRC
Grey Mesh LRP
Sheer Mesh LRQ
Steel Mesh LRT
Gilded Mesh LRZ
Frame Options
Silver P06
White P07
Oatmeal P08
Charcoal P09
Black P10
Alloy P11
Mirror (standard) P54
Evolving Woodgrains
Millennium Oak LCG
Smoky Brown Pear LCC
Oiled Walnut LCR
Zebrano LCT
Chestnut Woodline LCX
Dunewood LCY
White Ash LZ7
Weathered Ash LZ8
Natural Ash LZ9
Non-Standard Laminatespecify manufacturer name and code number. Additional up-charge and extended lead times may apply.
Standard Features Meets or Exceeds ANSI/BIFMA X5.1 1993
Fixed seat to back angle
UA ARMS CANNOT BE UPHOLSTERED IN VINYL.
Construction
Outer Back Shell
Upholstery
Arms
Frame
To Order Specify
Fabric and Colorway
Frame Finish
Painted Frame
Optional Features
Upholstered Open Arms
Mirror Finish Base/Frame
Double Shell
Painted Frame
No Pleat
Suffix $ Change Quick Ship Notes
UA +185 (fabric) — COM add .5 yd. Cannot be upholstered in Vinyl.
+204 (leather) — COL leathers add 3.5 sq. ft. UA Option not available on Sled Base model
P54 +89 — Black arm caps standard.
DS +250 — Call Customer Service for COM and COL requirements.
PF — — Black is standard unless otherwise specified. For all other painted frame finishes,
add “PF” suffix and upcharge. Black arm caps standard.
NP — — Pricing on opposite page
116 izzyplus.com/harter 855.321.izzy March, 2015
117izzyplus.com/harter 855.321.izzy March, 2015
Lounge
Lounge Products Harter Forum 118Harter Forum Ottoman 120Harter Forum Wood 122Harter Forum Wood Ottoman 124Harter Forum Benches 126Harter Forum Tables 130 Truman 132 Truman Bench 134Truman Tables 136
118 izzyplus.com/harter 855.321.izzy March, 2015
One-Seater
Design by Timothy deFiebre
Lounge Harter Forum
Front View
Sizes
Side View
Styles
Product Number
Quick Ship
Dimensions
Overall Width
Overall Height
Overall Depth
Seat Depth
Seat Width
Seat Height
N68E13S N68E13D
Fabric Grades
COM Ydg. Required*
COL Sq. Ft. Required
1/COM/COL
2
3
4
5
6
Two-Seater
243⁄8”
293⁄4”
273⁄4”
20”
24”
17”
483⁄8”
293⁄4”
273⁄4”
20”
48”
17”
2 yds.
31 sq. ft.
4 yds.
56 sq. ft.
1174
1236
1298
1359
1421
1483
Three-Seater
N68E13T
723⁄8”
293⁄4”
273⁄4”
20”
72”
17”
6 yds.
81 sq. ft.
N68E03TN68E03S N68E03D
723⁄8”
323⁄4”
273⁄4”
20”
72”
17”
6 yds.
86 sq. ft.
243⁄8”
323⁄4”
273⁄4”
20”
24”
17”
2 yds.
34 sq. ft.
483⁄8”
323⁄4”
273⁄4”
20”
48”
17”
4 yds.
60 sq. ft.
Mid Back Mid Back Mid BackHigh Back High Back High Back
*COM Ydg. based on 54” wide fabric, no repeat. For COM’s with a repeat, call customer service for yardage requirements.
1221
1283
1345
1406
1468
1530
3861
4170
4479
4788
5097
5406
2264
2449
2635
2820
3006
3191
3913
4222
4531
4840
5149
5458
2219
2404
2590
2775
2961
3146
119izzyplus.com/harter 855.321.izzy March, 2015
Grade 1 – 6, COM, COL. Refer to pages 17-21 for complete listing of upholstery options and product exceptions.