T-4108. Page 1 of 17 GUJARAT STATE ELECTRICITY CORPORATION LIMITED GUJARAT STATE ELECTRICITY CORPORATION LIMITED GUJARAT STATE ELECTRICITY CORPORATION LIMITED GUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi – 394680. Ph. 91-2624-233215, 233257 Fax: 91-2624-233300, 233315.e-mail: [email protected]. Website: www.gsecl.in CIN: U40100GJ1993SGC019988 TECHNICAL BID T – 4108 (E-Tender I.D. No. _____________) Subject : Supply of Limit switches for various application for Boiler of 1x500MW Ukai Unit #6 at GSECL UTPS Due on Date : ________________________ At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No._________________________ Date : _____________________ OR SSI / NSIC Certification Number : __________________________________________ _____________________________________________________________________ Duly Notarized : YES / NO Notes : (1) The party has to submit latest and valid SSI / NSIC Certificate. Photocopy of SSI / NSIC Certificate is not acceptable. It must be duly notarized. It should not be more than 3 years old. (2) Tenders submitted without Tender Fee and Earnest Money Deposit (E.M.D.) will not be accepted.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
T-4108. Page 1 of 17
GUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITED
Ukai Dam, Taluka: Fort Songadh, Dist:Tapi – 394680. Ph. 91-2624-233215, 233257
Fax: 91-2624-233300, 233315.e-mail: [email protected]. Website: www.gsecl.in CIN: U40100GJ1993SGC019988
TECHNICAL BID
T – 4108 (E-Tender I.D. No. _____________)
Subject : Supply of Limit switches for various application for Boiler of 1x500MW Ukai Unit #6 at GSECL UTPS
Due on Date : ________________________ At 3.30 P.M. (if Possible)
EMD paid YES / NO
EMD D. D. No._________________________ Date : _____________________
OR
SSI / NSIC Certification Number : __________________________________________
_____________________________________________________________________
Duly Notarized : YES / NO
Notes :
(1) The party has to submit latest and valid SSI / NSIC Certificate. Photocopy of SSI /
NSIC Certificate is not acceptable. It must be duly notarized. It should not be more
than 3 years old.
(2) Tenders submitted without Tender Fee and Earnest Money Deposit (E.M.D.) will
not be accepted .
T-4108. Page 2 of 17
GUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITED
Ukai Dam, Taluka: Fort Songadh, Dist:Tapi – 394680. Ph. 91-2624-233215, 233257
Fax: 91-2624-233300, 233315.e-mail: [email protected]. Website: www.gsecl.in CIN: U40100GJ1993SGC019988
T – 4108
Tender for :- Supply of Limit switches for various application for Boiler of 1x500MW Ukai Unit #6 at GSECL UTPS
Sr. No. Index Page No.
1. Tender Notice
2. Undertaking (To be signed by the Tenderer)
3. Detail Specifications (Technical Bid)
4. Tender & Contract for works (Booklet)
5. Drawing Number
6. Schedule 'B' (Price Bid)
Issued to ____________________________________________________________
__________________________________________________________________
Demand Draft No. for Tender Fee : __________________ & Date : __________ Demand Draft No. for Earnest Money Deposit : ______________ & Date : __________ IMPORTANT NOTE :
This tender should be submitted duly signed without removing a single page. Otherwise
the tender is liable to be rejected.
For SUPPLY TENDER, TIN / PAN Number should be invariable mentioned in their
technical bid otherwise your offer will be ignored and price bid will not be opened.
T-4108. Page 3 of 17
Gujarat State Electricity Corporation Limited Ukai Thermal Power Station
THERMAL POWER STATION, UKAI DAM, DIST - TAPI - 394680 TECHNICAL BID
Reference No. : T –4108 Subject : Supply of Limit switches for various application for Boiler of 1x500MW Ukai Unit #6 at GSECL UTPS Sr. No. Description of Material Qty.
Required Unit
1 HEAVY DUTY LIMIT SWITCH, RATING- 10 AMPS, 600V AC MAX PILOT DUTY, CONTACT ARRANGEMENT- 2 NO + 2NC, WITH OPERATING LEVER
10 Numbers
2 HEAVY DUTY LIMIT SWITCH, RATING- 5 AMPS, 600V AC, CONTACT ARRANGEMENT- 2 NO + 2NC, IP-67, WITH OPERATING LEVER
4 Numbers
3 HEAVY DUTY LIMIT SWITCH, RATING- 10 AMPS, 500V AC, 2 NO + 2NC, WITH OPERATING LEVER
4 Numbers
4 HEAVY DUTY LIMIT SWITCH, RATING- 10 AMPS, 600V AC MAX PILOT DUTY, CONTACT ARRANGEMENT- 2 NO + 2NC, WITH ROLLER CAM TYPE OPERATING LEVER
4 Numbers
5 HEAVY DUTY LIMIT SWITCH, RATING- 02 AMPS, 125V AC, CONTACT ARRANGEMENT- 2 NO + 2NC, WITH OPERATING LEVER
10 Numbers
6 LIMIT SWITCH, RATING: 10A - 125 OR 250VAC, 0.3 A - 125VDC, 0.15 A - 250VDC, CONTACT ARRANGEMENT - 1 NO + 1NC, WITH OPERATING LEVER
10 Numbers
7 SPLASH PROOF LIMIT SWITCH, RATING: 10A- 125 OR 250VAC, 0.3 A - 125VDC, 0.15 A - 250VDC, CONTACT ARRANGEMENT: 2 NO + 2NC, WITH OPERATING LEVER
10 Numbers
8 LIMIT SWITCH, RATING: 10A - 125 OR 250VAC, 0.3 A - 125VDC, 0.15 A - 250VDC, CONTACT ARRANGEMENT- 1 NO + 1NC, WITH ROLLER TYPE OPERATING LEVER
10 Numbers
9 JAY BALAJI MAKE LIMIT SWITCH FOR SOOT BLOWER J.Y.D-5 TYPE SNAP ACTION SPRING RETURN 25AMP 600V A.C 1NO+1NC CONTACT LEVER FORK TYPE -IP 67
10 Number
10 LIMIT SWITCH FOR SOOT BLOWER, RATING- 10 AMP, 125 , 250 V AC, 0.8 A 125 V DC, CONTACT ARRANGEMENT- 1 NO + 1 NC, OPERATING LEVER- FORK TYPE
10 Numbers
11 LIMIT SWITCH FOR WALL BLOWER, RATING- 10 AMP, 300 V AC, 6 AMP 24 V DC, CONTACT ARRANGEMENT- 1 NO + 1 NC, OPERATING LEVER- KNIFE TYPE
10 Numbers
12 LIMIT SWITCH FOR WALL BLOWER, RATING- 0.8 AMP- 600 VAC, 1.0 AMP- 115V DC, CONTACT ARRANGEMENT- 2 NO + 2 NC, OPERATING LEVER- ROLLER CAM TYPE
20 Numbers
[ i ] While filling-up various taxes through On-line Price Bid , the party has to mention the tax in Rupees instead of percentage.
[ ii ] Test Certificate should be submitted along with supply of material for Item Sr No1 to12
T-4108. Page 4 of 17
Specification for items: Item Sr No.1: Hot air gate / Coal air gate position feedback limit switch Requirement Specification: Make: MICRO SWITCH/HONEYWELL/ ALLEN BRADLY Type : Heavy duty Limit Switches, equivelant of LSA2B of MICROSWITCH make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 10A 600V AC Operating Lever and Mounting arrangement- As per attached file -image No.01 Existing installed- Make: MICRO SWITCH, USA, Heavy duty limit switch, Model No. LSA2B, 0910, EQ A156, ENCL. 3, 4.4X, 6P, 13 Item Sr No.2: BCW DISCHARGE VALVE position feedback Limit switch Requirement Specification: Make: JAI BALAJI / ALLEN BRADLEY/NAMCO/ BCH Type :Heavy duty Limit Switches, equivelant of JB 2700 ML-2799 of JAI BALAJI make Terminal : Screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 05A 600V AC Operating Lever and Mounting arrangement - As per attached file -image No.02 Existing installed- Make: Jai Balaji Control Gear Pvt Ltd, Heavy duty limit switch, Model No. JB 2700, ML-2799 Item Sr No.3: RC Feeder discharge Gate Open position feedback limit switch Requirement Specification: Make: Vecco/ JAI BALAJI / Micro Switch/ Honeywell Type : Limit Switches, equivalent of type- VLS of Vecco make Terminal : Screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 10A 500V AC Operating Lever and Mounting arrangement - As per attached file -image No.03 Existing installed- Make: Vecco, limit switch, Type- VLS Item Sr No.4: RC Feeder discharge Gate Close position feedback limit switch Requirement Specification: Make: MICRO SWITCH/HONEYWELL/ ALLEN BRADLY Type : Heavy duty Limit Switches, equivelant of LSA2B-1B of MICROSWITCH make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 10A 600V AC Operating Lever and Mounting arrangement- As per attached file -image No.04 Existing installed- Make: MICRO SWITCH, USA, Heavy duty limit switch, Model No. LSA2B-1B, 0731, EQ A156, ENCL. 3, 4.4X, 6P, 13 Item Sr No.5: HEA IGNITER Advance/ Retract position feedback limit switch Requirement Specification: Make: OMRON/ MICRO SWITCH/HONEYWELL/ ALLEN BRADLY Type : Heavy duty Limit Switches, equivelant of Model No. 04A-451 ON of OMRON JAPAN make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 02 Amps, 125V AC Operating Lever and Mounting arrangement- As per attached file -image No.05 Existing installed- Make: OMRON, JAPAN, Heavy duty limit switch, 2NO+2NC, Model No. 04A-451 ON, 0731, EQ A156, TYPE 3, 4,4X, 6P
T-4108. Page 5 of 17
Item Sr No.6: RC FEEDER Seal Air valve position feedback limit switch Requirement Specification: Make: MEXICO/ MICRO SWITCH/HONEYWELL/ ALLEN BRADLY/ BCH/JAI BALAJI Type : Limit Switches, equivelant of Model No. DT-2RV3-A7, L59, 1017, MEXICO make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 1NO+1NC Utilisation category: 10 Amps, 125V AC, 0.3 A - 125VDC, 0.15 A- 250VDC Operating Lever and Mounting arrangement- As per attached file -image No.06 Existing installed- Make- MEXICO, Model- DT-2RV3-A7, L59, 1017, MEXICO Item Sr No.7: MANUAL VALVE position feedback limit switch Requirement Specification: Make: MICRO SWITCH/HONEYWELL/ ALLEN BRADLY Type : Heavy duty Limit Switches, equivelant of CATALOG LISTING : OPD- AR 1006 of Micro Switch, USA Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 10A- 125 or 250VAC, 0.3 A - 125VDC, 0.15 A- 250VDC Operating Lever and Mounting arrangement- As per attached file -image No.07 Existing installed- Make- Micro Switch USA, Splash proof switch, Rating: 10A- 125 or 250VAC, 0.3 A - 125VDC, 0.15 A- 250VDC, CATALOG LISTING : OPD- AR 1006, 2 NO + 2NC Item Sr No.8: HONV VALVE Position feedback limit switch Requirement Specification: Make: MICRO SWITCH/HONEYWELL/ ALLEN BRADLY/ OMRON Type : Limit Switches, equivelant of Model BNo. DZ-10GV22-1B of OMRON make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 10A- 125 or 250VAC, 2 A -480 VAC, 1/8HP 125VAC, 1/4HP 240VAC, 1/2 A 125VDC, 1/4 A 250 VDC Operating Lever and Mounting arrangement- As per attached file -image No.08 Existing installed- Make- OMRON, Rating: 10A- 125 or 250VAC, 2 A - 480 VAC, 1/8HP 125VAC, 1/4HP 240VAC, 1/2 A 125VDC, 1/4 A 250 VDC, Model BNo. DZ-10GV22-1B, 25310Z3, 2 NO + 2NC Item Sr No.9: LR soot blower forward end limit switch Requirement Specification: Make: JAI BALAJI/ BCH/NAMCO CONTROL/ SQUARE-D Type : SNAP ACTION SPRING RETURNS Limit Switches, equivelant of Model - JUD-1of JAI BALAJI make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 1NO+1NC Utilisation category: 25 AMPS, 600 V AC Operating Lever and Mounting arrangement- As per attached file -image No.09 Existing installed- MAKE- JAY BALAJI MAKE LIMIT SWITCH FOR SOOT BLOWER J.U.D.-1 TYPE SNAP ACTION SPRING RETURN 25AMP 600V A.C, 1NO+1NC CONTACT LEVER FORK TYPE -IP 67 Item Sr No.10: LR soot blower HOME position limit switch Requirement Specification: Make: HONEYWELL/ JAI BALAJI/ BCH/NAMCO CONTROL/ SQUARE-D
T-4108. Page 6 of 17
Type : Limit Switches, equivelant of Model - SZL-WLC-A of Honeywell, Korea make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 1NO+1NC Utilisation category: 10 AMPS- 125 V AC, 0.8 Amps- 125 VDC Operating Lever and Mounting arrangement- As per attached file -image No.10 Existing installed- Make- Honeywell, Korea, Model - SZL-WLC-A, Rating- 10 Amp, 125 , 250 V AC, 0.8 A 125 V DC, Contact arrangement- 1 NO + 1 NC, Operating lever- Fork type Item Sr No.11: Wall blower Rotary position limit switch Requirement Specification: Make: HONEYWELL/ JAI BALAJI/ BCH/NAMCO CONTROL/ SQUARE-D Type : Limit Switches, equivelant of Model - SZL-WLC-A (Del L,A) of Honeywell, Korea make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 1NO+1NC Utilisation category: 10 AMPS- 300 V AC, 6 Amps- 24 VDC Operating Lever and Mounting arrangement- As per attached file -image No.11 Existing installed- Make- Honeywell, Korea, Model - SZL-WLC-A, Rating- 10 Amp, 300 V AC, 6 Amp 24 V DC, Contact arrangement- 1 NO + 1 NC, Operating lever- Knife type Item Sr No.12: Wall blower Home/End position limit switch Requirement Specification: Make: BCH/ JAI BALAJI/ NAMCO CONTROL/ SQUARE-D Type : Limit Switches, equivelant of Model - 10412 05A of BCH make Terminal : screw type , capacity 1.5 sq mm solid/stranded Contact : 2NO+2NC Utilisation category: 0.8 AMP- 600 VAC, 1.0 AMP - 115 VDC Operating Lever and Mounting arrangement- As per attached file -image No.12 Existing installed- Make- BCH Elect Ltd., Model - 10412 05A, Rating- 0.8 Amp- 600 VAC, 1.0 Amp- 115V DC, Contact arrangement- 2 NO + 2 NC, Operating lever- Roller cam type Note to bidder:- 1) Party must confirm suitability & interchangeability with our existing ones. 2) Party has to supply the material exactly identical and interchangeable spares with the existing installed spares. If any problem of fitment will be arises, same should be replaced at free of cost by the party. 3) Party should attached complete literature/catalogue of offered make switch along with tech-bid. In addition, Party should attach the Image / drawing clearly showing the mounting arrangement and operating lever arrangement of the offered make & type of the switch. 4) Party has to offer & supply the materials as per detail specifications only. 5) Image / photos of existing installed limit switches are attached herewith for ref. of installation and lever arrangement of switches. 6) Sample approval is must before supply of the bulk material for the party. Sample and bulk supply should be completed within 04 months after placement of LOI / PO. 7) Bidder has to submit valid authorization certificate of offered make items from OEM along with technical bid. 8) Bidder have to submit test certificate from OEM along with supply of material. 9) Bidder has to offer guarantee / warranty for period of 18months from material supplied or 12month from date of commissioning whichever earlier.
T-4108. Page 7 of 17
Special Notes :
(1) It is mandatory for all bidders to submit their ten der documents by both forms viz. online (e-tendering) and physically in schedule time. I f t ender documents submitted in only any one form, say either by on-line or physically, in t hat case the same tender will not be considered.
Further bidders are requested to submit Price bid (Schedule-B) online only and not to submit the Price bid in Physical form. This is mandator y. If price bid is submitted in physical form, the same will not be opened and only on-line submitted Price bid will be considered for evaluation. Further, if the quantity quoted differs in the any of the technical bid forms and in price bid forms, it is at the discretion of CE Committee / ED Committee - GSECL to consider the quoted quantity.
(2) Please submit photocopy of Schedule-B duly signed by you, along with TECHNICAL BID, without stating prices.
(3) Tender shall not be opened without payment of E MD & Tender Fee. Please furnish details of EMD & Tender Fee paid on cover.
(4) If any deviation in your offer with respect to Tender specification, then please mention clearly in separate deviation sheet , otherwise we will consider your offer is exactly as per our Enquiry / Tender specification.
(5) GSECL reserves rights to place the order on technically qualified bidders for item wise / individual lowest quoted party .
(6) Repeat Order : GSECL reserves right for the placement of repeat order @ 50 % of the order quantity / value within 4 (Four) months of the order as per the Clause No. 24 of Commercial Terms and Conditions instead of 25 %. Other condition of Clause No. 24 remains same.
(7) It is to be noted that GSECL, Ukai TPS is establishing and implementing occupational Health & Safety Management System complying with OHSAS 18001:2007. You as a part of the GSECL Ukai team and as defined by the scope of mentioned standard, all contractors are required to comply with and participate to prevent the occupational Health and Safety hazards and risks including observation of safety rules. Further you are also to comply with all applicable legal requirements while executing the supply / work, in case the job is assigned to you.
(8) Party has to accept Payment Term as per GSECL’s standard terms & conditions: Payment shall be made by the GSECL for the material supplied at 80 % plus 100 % taxes
against T.R.C. within 30 days and balance 20 % against S. R. Note within 45 days from the date of receipt of material at our site.
(9) Delivery Period : ( i ) Sample approval : Within 01 Month ( ii ) Bulk S upply after Sample approval : Within 03 Months
(10) While filling-up various taxes through On-line Price Bid , the party has to mention the tax in Rupees instead of percentage.
(11) Tender Fee / Earnest Money Deposit (E.M.D.) / Security Deposit (S.D.) will be accepted by Demand Draft / RTGS / NEFT also. The bank details are as under,
Beneficiary Name : M/s. Gujarat State Electricity Corporation Ltd. Address : Urja Nagar, GEB Colony, Taluka : Songadh. Dist. : Tapi., Pin Code - 394680. Bank Name : Bank of Baroda Ukai. Nature of A/C : Current Accounts., Branch : Ukai. Account No. : 02640200000002 IFSC CODE No. : BARB0UKAIXX ( 0 = ZERO) MICR CODE No. : 394012529.
After net banking transaction, please inform to our Account Section regarding payment details along with tender number on their e-mail id of [email protected] and [email protected]
CHIEF ENGINEER (GEN.) GSECL, Ukai TPS.
Contractor's Signature With date and seal
RFQ No. : 32909
T-4108. Page 8 of 17
IMPORTANT:
All the bidders are requested to read and verify the documents of Commercial Terms & Condition of Tender & Supply (i.e. Clause No.1 to 83) of GSECL, UKAI, TPS and confirm that all the above documents are verified & certify by you as below.
“ I / we read the above documents and agree for the Conditions of Tender & Supply (i.e. Clause
No.1 to 83) of GSECL, UKAI, TPS and accordingly submitted my / our offer. ”
(1) For Page No. 1 to 21 of terms & condition : Party can give acceptance of clause No.1 to 83 on a single paper instead of all 21 pages.
(2) For Page No. 25 to 37 : Please note that you have to furnish the details in all Annexure-1 to 13,
Certificate-A & Integrity Pact i.e. dully fill, stamped and signed otherwise your offer is likely to be ignored out rightly.
(3) In case of Ex-works Prices, you have to mention item wise Pkg. & Fwd., Freight, insurance charges in Annexure-10 otherwise it will be considered as per GSECL procedure for evaluation.
(4) Clause No. 12 of Commercial Terms & Condition a t Page No.6 of 46 : Kindly read clause No. 12 i.e. Security Deposit of Commercial terms & Condition as below.
SECURITY DEPOSIT :
The successful Tenderer’s will be required to pay an amount equivalent to 10 % of the value of the Order (End Cost) against letter of intent as per GOG guideline as a Security Deposit for satisfactory execution of the contract. Such security deposit will be payable either in D.D./Bank Guarantees. Bank Guarantees will be acceptable if issued by Bank of Baroda and State Bank of India. The Bank Guarantees will be executed on the standard form prescribed by the GSECL. In case of the Bank Guarantees furnished / submitted, they should have clear one t ime validity till the completion of the order in al l respects and up to the expiry of guarantee period f rom the date of receipt of the last consignment. Bank Guarantees for interim period will not be allo wed. If by any reasons the supply period is extended then supplier should undertake to renew th e Bank Guarantee at least 01 Month before the expiry of the validity failing which GSECL will be at liberty to encash the same. CORPORATE BANK GUARANTEES NOT ALLOWED.
If S.D. Exemption is claimed against NSIC Certificate, then the NSIC Certificate / Competency Certificate more than 03 years old will not be considered. If the validity of the certificate expires prior to completion of the order, then it has to be got revalidated from NSIC by the Tenderer and submitted immediately; otherwise bidder shall have to arrange for payment of Security Deposit. S.D. should be paid within 07 (Seven) days after re ceipt of the LOI. Security Deposit is to be paid @ 6 % of the Order End Cost for Small, Cottage & tiny industrial unit of Gujarat State registered under Small Scale industries of Gujarat State and holding subsequent registration with CSPO / NSIC / DGS&D Registration Certificates for the item under tender. .(Applicable Only of Gujarat base Parties)
Contractor's Signature With date and seal
R.F.Q. No. : 32909
T-4108. Page 9 of 17
LEVR AND MOUNTING ARRANGEMENT OF LIMIT SWITCHES
1. HOT AIR – COLD AIR GATE POSITION FEEDBACK SWITCH:
IMAGE NO. 01
2. BCW DISCHARGE VALVE POSITION FEEDBACK SWITCH:
IMAGE NO. 02
T-4108. Page 10 of 17
3. RC FFEDER DISCHARGE GATE OPEN POSITION FEEDBACK LIMIT
SWITCH:
IMAGE NO. 03
4. RC FFEDER DISCHARGE GATE CLOSE POSITION FEEDBACK LIMIT
SWITCH:
IMAGE NO. 04
T-4108. Page 11 of 17
5. HEA IGNITER ADV/RETRACT POSITION FEEDBACK LIMIT SWITCH:
IMAGE NO. 05
6. RC FFEDER SEAL AIR VALVE POSITION FEEDBACK LIMIT SWITCH:
IMAGE NO. 06
T-4108. Page 12 of 17
7. MANUAL VALVE POSITION FEEDBACK LIMIT SWITCH:
IMAGE NO. 07
8. HONV VALVE POSITION FEEDBACK LIMIT SWITCH:
IMAGE NO. 08
T-4108. Page 13 of 17
9.LR soot blower forward end limit switch
IMAGE NO. 09
10. LR soot blower HOME position limit switch
IMAGE NO. 10
T-4108. Page 14 of 17
11. Wall blower Rotary position limit switch
IMAGE NO. 11
12. Wall blower Home/End position limit switch
IMAGE NO. 12
T-4108. Page 15 of 17
GUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITED
Ukai Dam, Taluka: Fort Songadh, Dist:Tapi – 394680. Ph. 91-2624-233215, 233257
Fax: 91-2624-233300, 233315.e-mail: [email protected]. Website: www.gsecl.in CIN: U40100GJ1993SGC019988
PRICE BID
T - 4108 (E-Tender I.D. No.----------------)
Subject : Supply of Limit switches for various application for Boiler of 1x500MW Ukai Unit #6 at GSECL UTPS .
Please submit price bid duly signed and stamp (with out stating above / below rates) along with Technical Bid.
T-4108. Page 16 of 17
GUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITEDGUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi – 394680. Ph. 91-2624-233215, 233257
Fax: 91-2624-233300, 233315.e-mail: [email protected]. Website: www.gsecl.in CIN: U40100GJ1993SGC019988
SCHEDULE - B (Price Bid)
Description : Supply of Limit switches for various application for Boiler of 1 X 500MW Ukai Unit #6 at GSECL UTPS Reference No. : T – 4108 (E-Tender I.D. No. ……………………) Urja RFQ No. : 32909
Sr. No.
Description of materials
with details of Specifications
Quantity
Required
UOM Quantity
Offered by
Tenderer
Unit Ex-
Works
In Rs.
Pkg. & Fwd.
Charges per Unit in Rs.
Excise Duty per
unit in Rs.
Sales Tax per unit
in Rs.
Insu - rance
Charges per unit in Rs.
Freight Charges per
unit in Rs.
Unit End Cost Price in Rs.
Total End Cost Price in Rs.
1 HEAVY DUTY LIMIT SWITCH, RATING- 10 AMPS, 600V AC MAX PILOT DUTY, CONTACT ARRANGEMENT- 2 NO + 2NC, WITH OPERATING LEVER
10 Numbers
2 HEAVY DUTY LIMIT SWITCH, RATING- 5 AMPS, 600V AC, CONTACT ARRANGEMENT- 2 NO + 2NC, IP-67, WITH OPERATING LEVER
4 Numbers
3 HEAVY DUTY LIMIT SWITCH, RATING- 10 AMPS, 500V AC, 2 NO + 2NC, WITH OPERATING LEVER
4 Numbers
4 HEAVY DUTY LIMIT SWITCH, RATING- 10 AMPS, 600V AC MAX PILOT DUTY, CONTACT ARRANGEMENT- 2 NO + 2NC, WITH ROLLER CAM TYPE OPERATING LEVER
4 Numbers
5 HEAVY DUTY LIMIT SWITCH, RATING- 02 AMPS, 125V AC, CONTACT ARRANGEMENT- 2 NO + 2NC, WITH OPERATING LEVER
10 Numbers
T-4108. Page 17 of 17
6 LIMIT SWITCH, RATING: 10A - 125 OR 250VAC, 0.3 A - 125VDC, 0.15 A - 250VDC, CONTACT ARRANGEMENT - 1 NO + 1NC, WITH OPERATING LEVER
10 Numbers
7 SPLASH PROOF LIMIT SWITCH, RATING: 10A- 125 OR 250VAC, 0.3 A - 125VDC, 0.15 A - 250VDC, CONTACT ARRANGEMENT: 2 NO + 2NC, WITH OPERATING LEVER
10 Numbers
8 LIMIT SWITCH, RATING: 10A - 125 OR 250VAC, 0.3 A - 125VDC, 0.15 A - 250VDC, CONTACT ARRANGEMENT- 1 NO + 1NC, WITH ROLLER TYPE OPERATING LEVER
10 Numbers
9 JAY BALAJI MAKE LIMIT SWITCH FOR SOOT BLOWER J.Y.D-5 TYPE SNAP ACTION SPRING RETURN 25AMP 600V A.C 1NO+1NC CONTACT LEVER FORK TYPE -IP 67
10 Number
10 LIMIT SWITCH FOR SOOT BLOWER, RATING- 10 AMP, 125 , 250 V AC, 0.8 A 125 V DC, CONTACT ARRANGEMENT- 1 NO + 1 NC, OPERATING LEVER- FORK TYPE
10 Numbers
11 LIMIT SWITCH FOR WALL BLOWER, RATING- 10 AMP, 300 V AC, 6 AMP 24 V DC, CONTACT ARRANGEMENT- 1 NO + 1 NC, OPERATING LEVER- KNIFE TYPE
10 Numbers
12 LIMIT SWITCH FOR WALL BLOWER, RATING- 0.8 AMP- 600 VAC, 1.0 AMP- 115V DC, CONTACT ARRANGEMENT- 2 NO + 2 NC, OPERATING LEVER- ROLLER CAM TYPE
20 Numbers
Notes: (1) The party has to refer Technical Bid for Technical Specification of above mentioned item.
(2) While filling-up various taxes through On-line Price Bid , the party has to mention the tax in Rupees instead of percentage.
Yours Faithfully,
CHIEF ENGINEER (GEN.) (Signature of the Tenderer)
GSECL, Ukai TPS. (With Company`s Round Seal)
Related Documents
