-
PRO APF AGS-LED, FAA (L)Airside™ Guidance Sign
FAACompliances:FAA: AC 150/5345-44 Current Edition: L858 FAA: EB67
Current Edition
Guidance Signs
ApplicationsPRO APF AGS LED FAA Airside™ signs model are
designed for use on air-port taxiways to mark taxi routes and
intersections. Colors may be black on yellow, yellow on black, or
white on red depending on the application as defined by Ithe
govering standard FAA AC 150/5345-44 and EB 67. Black Signs with
white numerals are used to indicate distance remaining in thousands
of feet of runway.
Features ETL Certified
LED bars are used in all types of guidance signs
Operating temperature:–40°C to +55°C
Uses long life LED technology with 50,000h projected
lifetime
Stainless steel fasteners used for improved weather
resistance
Frangible coupling installed on concrete foundation meets FAA
requirements
Power factor > 0.95 acrossall steps
Compatible with Eaton Crouse-Hinds Series CLD Logitrac
devices
Sign Type:858S= FAA
Model: AP1 = PRO APF Product Generation
Size:1 = Taxiway Sign, 12” Legend Height2 = Taxiway Sign, 15”
Legend Height3 = Taxiway Sign, 18” Legend Height4 = Distance
Marker, 40” Numeral Height5 = Distance Marker, 25” Numeral
Height
Number of Faces:S = Single FaceD = Double Face
Number of Sign Modules:10 = 1 Module15 = 1.5 Module20 = 2 Module
25 = 2.5 Module 30 = 3 Module 35 = 3.5 Module*
Exterior Frame Color: B = Black
Legend Panel Face Style:C = Continuous Panel FaceM = Modular
Panel Faces (Only available on signs larger than 1.5 module)
Blank Panel Color: B = Black N = None - Double Sided Legend
Sign
Wind Velocity:
3 = 300 MPH (483km/h)Leg Lengths:D = Legs for standard FAA
Height Signs
Power Options: L = Power Cable Through Leg
Safety Options: 1 = On/Off Power Switch 2 = On/Off Power Switch
with Switch Cover3 = Safety Tether (2 tethers, 1 on each end per
full module)4 = Safety Tether (1 tether on each module; standard on
FAA signs)
* 3.5 Module Sign is the longest length offered, sign has been
optimized for longest legend allowance by FAA
Ordering InformationHow to Order: To determine the ex-act number
of modules to fit your message, contact Crouse-Hinds.
Order isolation transformer, trans-former housing, coverplate
and gasket or baseplate, and connector kit separately. The colors
of the sign faces and the legends must be specified for each sign.
Multiple messages and colors may appear on a sign face.
A P 1 8 5 8 S - - - - - - - --
www.crouse-hinds.com/airportlighting Home Office: United States
– +1 860-683-4300International Offices: Canada • China • Dubai •
Mexico • Brazil
= 200 MPH (322km/h)2
-
NOMINALINSTALLED HEIGHT "H"
SEE TABLE
NOMINAL SIGNHEIGHT "F"SEE TABLE
VIEWABLE HEIGHT "G"
SEE TABLE
SIGN LENGTH "L"SEE TABLE
VIEWABLE LENGTH "K"SEE TABLE
DIM "D"DIST. FROM EDGEOF SIGN TO LEG
SEE TABLE
DIM "E"LEG SPACING
SEE TABLE
(3.0 SINGLE POWER SUPPLY)(3.5 MULTIPLE POWER SUPPLY)
Part Number Where Used Dim DSign Edge to leg
Dim ELeg to leg Space
Dim FSign Height
Dim GViewable Height
Dim HIn-stalled Height
Viewable Length K
Sign Length L
858S-AP11X-10
FAA Size 112” Legend
Height
8.406[213.5]
16.668 [423.9]
27.94 [709.6]
18.125 [460.4]
6.81 [173.1]
30.500 [774.7] 33.500 [850.9] .060 [1.5]
858S-AP11X-15 47.063 [1195.4] 50.063 [1271.6] .120 [3.0]
858S-AP11X-20 63.875 [1622.4] 66.875 [1698.6] .120 [3.0]
858S-AP11X-25 80.438 [2043.1] 83.438 [2119.3] .180 [4.6]
858S-AP11X-30 97.250 [2470.2] 100.250 [2546.4] .180 [4.6]
858S-AP11X-35 113.813 [2890.9] 116.813 [2967.1] .240 [6.1]
858S-AP12X-10
FAA Size 2 15” Legend
Height
10.156[258.0]
20.188[512.8]
33.94[862.1]
24.125[612.8]
6.81[173.1]
37.500 [952.5] 40.500 [1028.7] .060 [1.5]
858S-AP12X-15 57.563 [1462.1] 60.563 [1538.3] .120 [3.0]
858S-AP12X-20 77.875 [1978.0] 80.875 [2054.2] .120 [3.0]
858S-AP12X-25 97.938 [2487.6] 100.938 [2563.8] .180 [4.6]
858S-AP12X-30 118.250 [3003.6] 121.250 [3079.8] .180 [4.6]
858S-AP12X-35 138.313 [3513.2] 141.313 [3589.4] .240 [6.1]
858S-AP13X-10
FAA Size 318” Legend
Height
11.969[304.0]
23.813[604.8]
39.94[1014.5]
30.125[765.2]
6.81[173.1]
44.750 [1136.7] 47.750 [1212.9] .060 [1.5]
858S-AP13X-15 68.500 [1739.9] 71.500 [1816.1] .120 [3.0]
858S-AP13X-20 92.375 [2346.3] 95.375 [2422.5] .120 [3.0]
858S-AP13X-25 116.063 [2948] 119.063 [3024.2] .180 [4.6]
858S-AP13X-30 140.000 [3556.0] 143.000 [3632.2] .180 [4.6]
858S-AP13X-35 163.688 [4157.7] 166.688 [4233.9] .240 [6.1]
858S-AP14X-10 FAA Size 4 DM TBD TBD TBD 48.125[1222.4] TBD48.000
[1219.2] 51.000 [1295.4] .060 [1.5]
858S-AP15X-10 FAA Size 5 DM 11.969[304.0]23.813[604.8]
39.94[1014.5]
30.125[765.2] TBD
44.75 [1136.7] 47.750 [1212.9] .060 [1.5]
Side View
Dimensions: Inches [mm]
Instruction Manual: 1217
171mm6.75in
FLANGE WIDTH "W"SEE TABLE
WW
ACROSS ALLFLOOR FLANGES
.030 [.76mm] A
.030 [.76mm]A
TETHER
EATON’S CROUSE-HINDS BUSINESS
-
1.75-2.0
Modules
1 2 3 3.5
lbs.(kg.)
cu.ft.(cu.m.)
lbs.(kg.)
cu.ft.(cu.m.)
lbs.(kg.)
cu.ft.(cu.m.)
lbs.(kg.)
cu.ft.(cu.m.)
Size
90(40.8)
8.5(0.24)
180(81.6)
17.0(0.48)
270(122.5)
25.5(0.72)
360(163.3)
34.0(0.96)
115(52.2)
11.3(0.32)
230(104.3)
22.6(0.64)
345(156.5)
34.0(0.96)
460(208.7)
45.3(1.28)
Shipping Weights and Volumes
FOUR HOLES0.600 (15.24) DIAMETER
2-2.5 x 8 NPSM THREAD THRU
Dimensional InformationFloor Flange 62451
Technical DataElectrical Ratings:
Showing Internal Power Option L
www.crouse-hinds.com/airportlighting Home Office: United States
– +1 860-683-4300International Offices: Canada • China • Dubai •
Mexico • Brazil
-
Renewal Parts
Accessories
Part Shipping Weight Shipping VolumeDescription Number lb. kg.
cu. ft. cu. m.
Base L-867, Class I, 24 inches deep AC21242Hx00301* 52.0 23.6
2.6 0.074Baseplate, 2 inch Hub AP1932* 8.0 3.6 0.14
0.004Coverplate, 0.375 inches thick AK100006 5.0 2.3 0.13
0.004Gasket for Coverplate 10530287Isolation Transformer 100 watts,
6.6/6.6A TA10066D 12.0 5.4 0.4 0.011Isolation Transformer 200
watts, 6.6/6.6A TA200666 16.0 7.3 0.4 0.011Primary L-823 Connector
Kit 54 Super-D4-D4Secondary Cable Assembly, 2 meters
95M-R8-G-2**
* If the power leg is baseplate mounted directly on a base, only
the AC21242Hx00301 may be used with no gasket for the baseplate
AP1932 to insure equal breakaway with the other legs. The base must
be installed per the instruction manual, approximately 3/8 inch
high with the lower edge of the base top flange level with the
concrete. If the sign power leg is elbow mounted, base 900152 has
conduit entries in the required positions.
** Other lengths available. The sign includes cable clamp 25003
and two 40762 retainers.
EATON’S CROUSE-HINDS BUSINESS