GUARD íGET HOMEa..,a - iGet.eu

Model: HGWIP812

HGWIP812

GUARD Quick start guide - EN

íGET� HOMEa..,a

www.iget.eu/cs/helpdesk-centrum-cshttps://helpdesk.intelek.cz

iGET HOMEGUARD 2018

WHEREVER YOU ARE

GIVES YOU

PEACE OF MIND

32

Thank you for choosing HOMEGUARD.Getting started is easy.

WelcomeHOME

SurveillanceCHILDRENPlaying/Sleeping

ELDERLY RELATIVESSafe-guarding

PETSMonitoring

What’s included

Camera Power Adapter

Warning Sticker Bracket

Quick Start Guide User Manual

4 5

Parts & Description

Fixings Wall Plug

Speaker

Pan / Tilt

Power Port

Mic

Sensor

Lens

Reset Button

LED Light

MicroSDPROTECTED BY

24 HOURS VIDEO SURVEILLANCE

DC 5V

Get the App Network ConnectionStep 1For the best experience, download the Homeguardcare app for your smartphone by scanning the QR code below or searching for “Homeguardcare” in the app store.

Connect the AC adapter to your camera and plug it in.

Connect the camera to your router via WiFi Configuration Guide.

6 7

Make sure you are within range of the same Wi-Fi network you'll use for your camera.

LED statusLED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator.

LED Indicator

Blinking quickly

Blinking slowly

Keep blue (Network status)Keep red (Working status)

The indicator is off WiFi connection failed Device not operational

Network status indicator Blue colour

WiFi configuration successful Beginning upgrade

Working status indicator Red colour

Connecting to WiFi by One KeyConfiguration on App1. WPS configuration: searching for available WPS device2. WiFi mode: connecting to WiFi signal

The device works normallybut no Internet connection

Internet connected

WiFi Configuration GuideStep 2

3 4 5 6 7Select "Please scan the camera’sQR code" and scan the QR codeon the bottom of the camera

Select "Add cameras viaWiFi Configuration Guide"

Launch Homeguardcare App,Click “Add Camera”

Name the camera andclick “Next”

Input correct WiFi passwordand click “Next”

The camera will try to connectWiFi network (the defaultprocess is 90 seconds)

If connected, it will go back tothe Camera page and add thedevice automatically

8 9

HOMEGUARD IP CameraPart NO.: XXXXXXXX

Username: adminPassword: 123456DID: VIEW-000117-LZVZUDDNS: 005mryg.nwsvr1.com

Before you begin your IP Camera Set up, please:Have your IP Camera and power adapter ready.Have your iOS / android device available to download the Homeguardcare app.Make sure you are within range of the same Wi-Fi network you'll use for your camera.Run the app and add camera by scan the QR code at the bottom of the camera; Then input the user name and password.Click "More", select "Wi-Fi Config", fill in the Wi-Fi password and click "Configuration".You’re Done!

Congratulations! Your HOMEGUARD Camera is set up and ready to go.

You are now free to position your camera anywhere in your home where you get a WiFi signal and view it remotely from anywhere in the world on your Smartphone or Tablet!Please remember to change your password in the Advanced Setting-User Setting.Record your new password here:_______________________________________.

Tips:1. Please put your smartphone near to the router.2. Input WiFi SSID and password, click config button, then WiFi setup is finished.3. When WiFi indicator flash slowly (camera will be in this status after powered-on and hold for 5 minutes),

it means you can start config WiFi. After config is successful, WiFi indicator will flash fast for a while.

10 11

One Key WiFi ConnectionOR YOU CAN CHOOSE

Tap the monitoring screen, the video menu action bar will appear.

Live View Monitoring Options

Cruise VerticallyCruise HorizontallyMenuFlip

Snapshot to phone

Contrast

Contract

BrightnessRestore to DefaultResolution VGA/1080p

MirrorExit

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

IR LED OFF

Auto

Listen Talk

Set or Call Preset

12 13

Record video to phoneAudio On/OffMic On/Off

1. For 2-way Audio, ensure that the speaker is on. To Talk press & hold the Mic button until you’ve finished talking, then release.

2. Press Menu to switch between IR LED On/Off & Set or call Preset (for Pan&Tilt camera).

1 2 3 4 5 6

7 8 9 10 11 12 13 14 15

View from Mac or Windows PC Specifications

Hardware Features

ResolutionCompression / Max Frame RateImage Sensor / Lens

Pan / Tilt RangeMotion DetectionSecurity ProtocolsWireless SpeedCamera DimensionsPower Input

Wi-Fi SupportPower InterfaceReset ButtonBuilt-in microSD SocketBuilt-in Microphone and speaker4 infrared LED, 8m Night Vision Range1920 × 1080, 640 × 360H.264/MJPEG, 30fps1/2.7” CMOS Sensor, f=3.6mm,F=2.0 Viewing Angle: 105°Horizontal 300°, Vertical 60°Supported, Will Activate CameraWPA/WPA2, WPA-PSK/WPA2-PSKIEEE802.11b/g/n 150Mbps86mm × 85mm × 121mm5V DC, <6W

Item DescriptionInstall Homeguardcare software for your Mac or Windows PC from the included CD.

14 15