▶Standard type UB 1 N UB UBT Symbol Stainless steel mini ball valve Lever handle Stainless steel mini ball valve T-handle Type Symbol No symbol N Body material SCS13A SCS14A Symbol 0 1 2 1-stage 2-stage Reduced bore Full bore Bore diameter Product Codes of General Valves ▶Standard type U □ ※ F D □ Symbol No symbol M Symbol S G D CS C T Symbol F S Symbol No symbol 10 20 150 Symbol U Body material Stainless steel Body material SCS13A SCS14A Shape of connection Flanged Screwed Type Gate valve Globe valve Globe valve with disc Swing check valve Lift check valve Strainer Shape of connection H series 10K S series 10K S series 20K S series 150Ib 50A 50A ※The H-series valves with the “E” symbol are those with Hitachi Valve’s standard specifications. “E” stands for Economical. Example: UESG Example: H-series Globe valve with stainless steel 10K disc Production size Ball Valve Product Codes ▶Standard type BU 10 F 1 B□ Symbol 10 20 150 300 Symbol BU Type Ball valve (stainless steel) Nominal pressure 10K 20K 150Ib 300Ib Symbol F S Shape of connection Flanged Screwed Symbol 1 Bore diameter Full-bore, fire-safe Symbol No symbol M O Body material SCS13A SCS14A SCS16A Production size Production size ½ Edition dated March 2016 Product Warranty Within eighteen months of completion inspection or within twelve months of the start of usage, whichever is shortest, Hitachi Valve will repair or replace products or the faulty components of products free of charge in the event of failure under normal usage attributable to inadequate design or manufacturing on the part of Hitachi Valve. However, repairs or replacements will be charged in any of the following cases. Also note that if a separate agreement is in effect, that agreement shall take precedence. (1) When the product has been used in an incorrect manner which deviates from the catalog or instruction manual; (2) When the product failure is due to careless handling such as jamming with foreign substances or the sticking of excessive water stains; (3) When the product has been disassembled, repaired or altered by a third party other than Hitachi Valve; (4) When the product has been subject to causes beyond the control of Hitachi Valve including natural disasters such as wind or flood damage, earthquakes and electrical storms, fire, pollution (special environments), salt damage, war or acts of terror; (5) When a failure is due to any other factor not deemed to be the responsibility of Hitachi Valve. Damage caused by use, failure, defect, etc. of the product are excluded from the scope of warranty by Hitachi Valve. EST2016①1 • The product specifications, performance values and prices listed in this catalog are based on general conditions of use and are intended as guidelines for selecting models. Please confirm product specifications and conditions including fluids, temperatures and pressures before selecting a product. • The products listed in this catalog are not designed or manufactured for applications that require a special quality level, such as medical equipment, nuclear generation facilities or airplanes. • The products listed in this catalog are designed to be used within Japan. When exporting the products, the exporter will need to obtain an export license from the Ministry of Economy, Trade and Industry based on the provisions of the Export Control Order under the Foreign Exchange and Foreign Trade Act. • Please note that to improve this catalog, the contents may be changed or revised without prior notice. Please be aware that product catalogs published prior to such revisions are not valid. • The contents of this catalog are copyright of Hitachi Valve, Ltd. Duplication without permission is strictly prohibited. For inquiries, please contact your nearest Hitachi Valve sales office. • When using a product listed in this catalog, please follow the precautions listed in its instruction manual and use it properly. Agent http://www.hitachi-metals.co.jp/e Headquarters ☎+81-3-6774-3520 FAX+81-3-6774-4348 Niigata Sales Office ☎+81-25-241-5421 FAX+81-25-243-2558 Kita Nihon branch ☎+81-22-267-0216 FAX+81-22-266-7891 Hokkaido Sales Office ☎+81-11-806-1786 FAX+81-11-806-1792 Naka Nihon branch ☎+81-52-551-4138 FAX+81-52-551-4139 Shizuoka Sales Office ☎+81-54-202-1580 FAX+81-54-202-1588 Nishi Nihon branch ☎+81-6-7669-3763 FAX+81-6-7669-3736 Chugoku branch ☎+81-82-535-1710 FAX+81-82-535-1713 Kyushu branch ☎+81-92-687-5268 FAX+81-92-687-5266 Catalog General valves 10K /20K /150lb Ball valves 10K/20K/150lb/300lb GOURD BRAND Stainless Steel Valves
12
Embed
GOURD BRAND Stainless Steel ValvesGlobe valve Globe valve with disc Swing check valve Lift check valve Strainer Shape of connection H series 10K S series 10K S series 20K S series
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Hシリーズ
10KタイプSシリーズ
10KタイプSシリーズ
20KタイプSシリーズ
150
lbタイプミニボールバルブ
ボールバルブ
Hシリーズ
▶Standard type
UB 1 N
UB
UBT
Symbol
Stainless steel mini ball valveLever handle
Stainless steel mini ball valveT-handle
Type
SymbolNo symbol
N
Body materialSCS13ASCS14A
Symbol012
1-stage2-stage
Reduced bore
Full boreBore diameter
Product Codes of General Valves
▶Standard type
U □ ※ F D □Symbol
No symbolM
SymbolSGD
CSCT
SymbolFS
SymbolNo symbol
1020150
SymbolU
Body materialStainless steel
Body materialSCS13ASCS14A
Shape of connectionFlangedScrewed
TypeGate valveGlobe valve
Globe valve with discSwing check valve
Lift check valveStrainer
Shape of connectionH series 10KS series 10KS series 20K
S series 150Ib
50A
50A
※The H-series valves with the “E” symbol are those with Hitachi Valve’s standard specifications. “E” stands for Economical. Example: UESG
Example: H-series
Globe valve with stainless steel 10K disc
Production size
Ball Valve Product Codes
▶Standard type
BU 10 F 1 B□
Symbol1020150300
SymbolBU
TypeBall valve (stainless steel)
Nominal pressure10K20K
150Ib300Ib
SymbolFS
Shape of connectionFlangedScrewed
Symbol1
Bore diameterFull-bore, fire-safe
SymbolNo symbol
MO
Body materialSCS13ASCS14ASCS16A
Production size
Production size½
Edition dated March 2016
Product WarrantyWithin eighteen months of completion inspection or within twelve months of the start of usage, whichever is shortest, Hitachi Valve will repair or replace products or the faulty components of products free of charge in the event of failure under normal usage attributable to inadequate design or manufacturing on the part of Hitachi Valve. However, repairs or replacements will be charged in any of the following cases. Also note that if a separate agreement is in effect, that agreement shall take precedence.
(1) When the product has been used in an incorrect manner which deviates from the catalog or instruction manual;(2) When the product failure is due to careless handling such as jamming with foreign substances or the sticking of excessive water stains;(3) When the product has been disassembled, repaired or altered by a third party other than Hitachi Valve;(4) When the product has been subject to causes beyond the control of Hitachi Valve including natural disasters such as wind or flood damage, earthquakes and electrical storms, fire, pollution (special environments), salt damage, war or acts of terror;(5) When a failure is due to any other factor not deemed to be the responsibility of Hitachi Valve. Damage caused by use, failure, defect, etc. of the product are excluded from the scope of warranty by Hitachi Valve.
EST2016①1
• The product specifications, performance values and prices listed in this catalog are based on general conditions of use and are intended as guidelines for selecting models. Please confirm product specifications and conditions including fluids, temperatures and pressures before selecting a product.• The products listed in this catalog are not designed or manufactured for applications that require a special quality level, such as medical equipment, nuclear generation facilities or airplanes.• The products listed in this catalog are designed to be used within Japan. When exporting the products, the exporter will need to obtain an export license from the Ministry of Economy, Trade and Industry based on the provisions of the Export Control Order under the Foreign Exchange and Foreign Trade Act.• Please note that to improve this catalog, the contents may be changed or revised without prior notice. Please be aware that product catalogs published prior to such revisions are not valid.• The contents of this catalog are copyright of Hitachi Valve, Ltd. Duplication without permission is strictly prohibited. For inquiries, please contact your nearest Hitachi Valve sales office.• When using a product listed in this catalog, please follow the precautions listed in its instruction manual and use it properly.
General valves 10K /20K/150lbBall valves 10K /20K/150lb/300lb
GOURD BRAND
Stainless Steel Valves
●Use of austenite-based (Cr-Ni-based) stainless steel, which offers superior corrosion resistance and durability.
●A lineup of two series of valves (H-series and S-series) that take into account the lifecycle and serve various applications and purposes.
●Consideration was given to strength balance in the design of these valves. Lost wax casting is employed in the H-series valves to help improve the aesthetic appearance of the overall device.
Features
Pressure-Temperature Rating ASME B 16.34-1996 Pressure-Temperature Range
Production Standard
Series
Series Mini ball valve Ball valve (general-purpose, trunnion type)
Ball valve (general-purpose, for high temperatures, �oating type)
H-series S-series
Test Pressure
Test Pressure
Specifica-tion
standard
Scope of use
Specification standard
Packing
Connection
ThicknessEnd-to-end dimensions
Class
Gasket120℃ or lower150℃ or lower180℃ or lower220℃ or lower300℃ or lower
10KHitachi Valve standard/JIS B 2011
Hitachi Valve standard
JIS B 0203 Taper pipe threads
JIS B 2220 10K-FFReinforced PTFE (conical)
Reinforced PTFE
JIS B 2220 10K-RF JIS B 2220 20K-RF*1
ASME B 16.34(1996)JIS B 2002
10K(Metal seat) 10K(Soft seat) 20K 150lb
ASME B 16.10
ASME B 16.5(1996)150lb-RF
1.4 MPa
1.1 MPa1.0 MPa
ーー
ーー
1.2 MPa1.0 Mpa
1.28 Mpa
ーー
Expanded graphiteExpanded graphite
3.4 MPa
ーー
3.1 Mpa2.9 Mpa
Reinforced PTFE (conical)Reinforced PTFE
In accordance with ASME
B16.34 (1996)*2
□ H-series Oil is used:1. Usable oil: Heavy oil (A/ B/ C), lubricant oil, turbine oil (♯90 or above), coal tar, and pitch 2. Unusable oil: Crude oil, naphtha, gasoline, kerosene, light oil, turbine oil (♯80 or lower), and heat-transfer oil □ S-series Gasket and packing materials of a 10K/150lb valve will be replaced (with expanded graphite) if the valve is to be used at temperatures greater than 180℃.
Valve body pressure resistance
Valve seat leakage
Valve body pressure resistance
Valve seat leakage
Water pressure
Water pressure
Air pressure
Water pressure
Water pressure
Air pressure
0.59 Mpa1.54 Mpa2.10 Mpa 5.10 Mpa
3.74 Mpa2.93 Mpa2.09 MPa
Note: The water pressure test of the check valve to check for seat leakage shall be conducted by applying the specified pressure and then reducing the pressure to one-third.
*1 Excludes the thickness of the �ange (t). (125A or higher)*2 For details, see “Pressure-temperature ratings ASME B 16.34 (1996).”
*1 The special PTFE (FT seat) combines the excellent properties of PTFE and PFA.*2 The special PTFE (P seat) consists of multiple PTFE monomers, including a carbon-based reinforcing material, and can be used for �uids
at temperatures of up to 300℃.*3 Special customization is available for the conditions of use.
End-to-end dimensionsThickness
Connection
PackingSeat
Retainer O-ring
Caution: 1.Usable: Heavy oil (A/ B/ C), lubricant oil, turbine oil (♯90 or higher), coat tar, and pitch
2.Unusable: Crude oil, naphtha, gasoline, kerosene, turbine oil (#80 or lower), and heat-transfer oil
Scope of use
Reinforced PTFE PTFE PTFEReinforced PTFE Reinforced PTFE PTFESpecial PTFE (FT seat *1: general-purpose, P seat*2: for high temperatures)
ーー ー ー ー ー FKM*3
JIS B 0203 Taper pipe threads
Hitachi Valve standard
Hitachi Valve standard JIS B 2002 JIS B 2002ASME B 16.10 ASME B 16.10
600 Type 800 Type 10K 20K 150lb 300lb 10K 150lb
ASME B 16.34(1996)
JIS B 222010K-RF
JIS 222020K-RF
ASME B 16-5(1996)150lb-RF
ASME B 16-5(1996)300lb-RF
JIS B 222010K-RF
ASME B 16-5(1996)150lb-RF
See “Mini ball valve,” “Ball valve (floating),” and “Ball valve (trunnion)” in the section “Pressure-Temperature Range” on page 3.