Specifications Ordering code 10mm 2 (CV=0.56) 7mm 2 (CV=0.40) 12mm 2 (CV=0.67) 9mm 2 (CV=0.5) 3V110-M5 3V120-M5 3A110-M5 3A120-M5 3V110-06 3V120-06 3A110-06 3A120-06 3/2 way 10mm 2 (CV=0.56) 3/2 way 12mm 2 (CV=0.67) 40 micron filtered air Inside pilot type 0.15~0.8MPa 1.2MPa 5~50℃ ±10% of rated voltage AC: 2.5VA DC: 2.5W Class F. IP65 Lead wire or connector 5 cycle / second 0.05 second 4V130P-06 4A130P-06 4V130E-06 4A130E-06 4V120-M5 4A120-M5 4V130C-M5 4A130C-M5 4V130P-M5 4A130P-M5 4V110-06 4A110-06 4V120-06 4A120-06 4V130C-06 4A130C-06 4V110-M5 4A110-M5 Model Position and way NO. Effective area Port size Fluid Operation Operating pressure Max. proof pressure Temperature Allowable voltage Power consumption Coil insulation & protection grade Electrical entry Highest action frequency Shortest excitation time Model Position and way NO. Effective area 4V130E-M5 4A130E-M5 5/3 way 5/2 way 5/3 way 5/2 way Air inlet=Air outlet=Exhaust=M5×0.8 Air inlet=Air outlet=Exhaust=G1/8″ - 1 10 06 B AC220V W - - Specification 4V:5/2(3) way solenoid valve 4A:5/2(3) way pneumatic control valve 3V:3/2 way solenoid valve 3A:3/2 way pneumatic control valve Series 100 series Port size M5: M5×0.8 06: 1/8″ Coil voltage DC12V DC24V AC24V 50Hz/60Hz AC110V 50Hz/60Hz AC220V 50Hz/60Hz AC380V 50Hz/60Hz Electrical entry Blank:Standard connector LD:Brown connector with light LD1:White connector with light W: Lead wire type Joint pipe form and initial state Blank:Pipe connection type B:5/2 way plate connection type 5/3 way plate connection type NC:3/2 way normal close type NO:3/2 way normal open type Coil and places 10:Single-head double- position 20:Double-head double- position 30C:Double-head three- position close centre 30E:Double-head three- position exhaust centre 30P:Double-head three- position Pressure centre 4V 4V100 Series Solenoid Valve, Pneumatic Control Valve 01
128
Embed
4V100 Series Solenoid Valve, Pneumatic Control Valvevoguepc.com/upfiles/Binder1.pdfV Series Solenoid Valve Valve type V:Solenoid valve A: Pneumatic control valve Port size 1: G1/8″
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Electrical entryBlank:Standard connectorLD:Brown connector with lightLD1:White connector with lightW: Lead wire type
Joint pipe form andinitial stateBlank:Pipe connection typeB:5/2 way plate connection type 5/3 way plate connection typeNC:3/2 way normal close typeNO:3/2 way normal open type
Coil and places10:Single-head double-position20:Double-head double-position30C:Double-head three-position close centre30E:Double-head three-position exhaust centre30P:Double-head three-position Pressure centre
4V
4V100 Series Solenoid Valve, Pneumatic Control Valve
01
4V110-M5 4V110-06
4V120-M5 4V120-06
4V130-M5 4V130-06
Dimensions
4V100 Series Solenoid Valve
02
Dimensions
4A100 Series Pneumatic Control Valve
4A110-M5 4A110-06
4A120-M5 4A120-06
4A130-M5 4A130-06
03
Dimensions
3V100 Series Solenoid Valve & 3A 100 Series Pneumatic Control Valve
3V110-M5 3V110-06
3V120-M5 3V120-06
3A110-M5 3A110-06
3A120-M5 3A120-06
04
Model
Position and way NO.
Effective area
Port size
Fluid
Operation
Operating pressure
Max. proof pressure
Temperature
Allowable voltage
Power consumption
Coil insulation & protection grade
Electrical entry
Highest action frequency
Shortest excitation time
Model
Position and way NO.
Effective area
4V200 Series Solenoid Valve, Pneumatic Control Valve
Electrical entryBlank:Standard connectorLD:Brown connector with lightLD1:White connector with lightW: Lead wire type
Joint pipe form andinitial stateBlank:Pipe connection typeB:5/2 way plate connection type 5/3 way plate connection typeNC:3/2 way normal close typeNO:3/2 way normal open type
Coil and places10:Single-head double-position20:Double-head double-position30C:Double-head three-position close centre30E:Double-head three-position exhaust centre30P:Double-head three-position Pressure centre
Dimensions
4V200 Series Solenoid Valve
4V210-06 4V210-08
4V220-06 4V220-08
4V230-06 4V230-08
06
Dimensions
4V200 Series Solenoid Valve
4V210-06B 4V210-08B
4V220-06B 4V220-08B
4V230-06B 4V230-08B
07
Dimensions
4A200 Series Pneumatic Control Valve
4A210-06 4A210-08
4A220-06 4A220-08
4A230-06 4A230-08
08
Dimensions
3V200 Series Solenoid Valve & 3A200 Series Pneumatic Control Valve
Electrical entryBlank:Standard connectorLD:Brown connector with lightLD1:White connector with lightW: Lead wire type
Joint pipe form andinitial stateBlank:Pipe connection typeB:5/2 way plate connection type 5/3 way plate connection typeNC:3/2 way normal close typeNO:3/2 way normal open type
Coil and places10:Single-head double-position20:Double-head double-position30C:Double-head three-position close centre30E:Double-head three-position exhaust centre30P:Double-head three-position Pressure centre
Dimensions
4V300 Series Solenoid Valve
4V310-08 4V310-10
4V320-08 4V320-10
4V330-08 4V330-10
11
Dimensions
4V300 Series Solenoid Valve
4V310-08B 4V310-10B
4V320-08B 4V320-10B
4V330-08B 4V330-10B
12
Dimensions
4A300 Series Pneumatic Control Valve
4A310-08 4A310-10
4A320-08 4A320-10
4A330-08 4A330-10
13
Dimensions
3V300 Series Solenoid Valve & 3A300 Series Pneumatic Control Valve
3V310-08 3V310-10
3V320-08 3V320-10
3A310-08 3A310-10
3A320-08 3A320-10
14
Model
Position and way NO.
Effective area
Port size
Fluid
Operation
Operating pressure
Max. proof pressure
Temperature
Allowable voltage
Power consumption
Coil insulation & protection grade
Electrical entry
Highest action frequency
Shortest excitation time
Model
Position and way NO.
Effective area
Ordering code
Specifi cation
Port size15: 1/2″
- 4 10 15 B AC220V W- - 4V
4V400 Series Solenoid Valve, Pneumatic Control Valve
50mm2(CV=2.79) 30mm2(CV=1.68)
3V410-15 3V420-15 3A410-15 3A420-15
3/2 way
40 micron fi ltered air
Inside pilot type
0.15~0.8MPa
1.2MPa
5~50℃
±10% of rated voltage
AC: 4.5VA DC: 3W
Class F. IP65
Lead wire or connector
5 cycle / second
0.05 second
4V420-15
4A420-15
4V430C-15
4A430C-15
4V430P-15
4A430P-15
4V410-15
4A410-15
4V430E-15
4A430E-15
5/2 way
50mm2(CV=2.79)
Air inlet=Air outlet=Exhaust=G1/2″
5/3 way
15
Specifi cation4V:5/2(3) way solenoid valve 4A:5/2(3) way pneumatic control valve 3V:3/2 way solenoid valve 3A:3/2 way pneumatic control valve
Electrical entryBlank:Standard connectorLD:Brown connector with lightLD1:White connector with lightW: Lead wire type
Joint pipe form andinitial stateBlank:Pipe connection typeB:5/2 way plate connection type 5/3 way plate connection typeNC:3/2 way normal close typeNO:3/2 way normal open type
Coil and places10:Single-head double-position20:Double-head double-position30C:Double-head three-position close centre30E:Double-head three-position exhaust centre30P:Double-head three-position Pressure centre
Dimensions
(3)4V400 Series Solenoid Valve & (3)4A400 Pneumatic Control Valve
4V410-154V420-15
4V430-15
4A410-15 4A420-15
4A430-15
3V410-15 3V420-15
3A410-15 3A420-15
16
Series100M: Base for 100 series200M: Base for 200 series 300M: Base for 300 series 400M: Base for 400 series
Base numbers
Ordering code
100M -
Series 100M: For 100 series 200M: For 200 series 300M: For 300 series 400M: For 400 series
Seal plate
200M - B
Seal plate ordering code
AInternal diameter/Symbol
100M-□F
200M-□F
300M-□F
400M-□F
B C E F G H K L M Q R S W X Y
58
61
75
104
44
51
65
95
20
21
26
32
4.2
4.3
4.5
5.5
18.3
22.4
27.3
34.3
19
23
27
31.5
5
6
6
7
140
170
189
222
(n-1)*19+38
(n-1)*23+46
(n-1)*28+54
(n-1)*35+63
155
189
208
243
G1/4
G1/4
G3/8
G1/2
40
43
53
68
30
32
48
67
78.5
92.5
99
112
25
26
30
38
27
35
40
50
Dimensions
100 - 400 Series Manifold Base
17
F
V Series Solenoid Valve
Valve typeV:Solenoid valveA: Pneumatic control valve
Electrical entryBlank:Standard connectorLD:Brown connector with lightLD1:White connector with lightW: Lead wire type
Coil and places1:Single-head double-position2:Double-head double-position3:Double-head three-position close centre4:Double-head three-position exhaust centre5:Double-head three-position pressure centre
Specifi cations
Specifi cation codeVF3000M:for VF3 series VF5000M:for VF5 series VZ5000M:for VZ5 series
Specifi cation codeS3R: 3/2 way double-way roll protrude trans-portation type mechanical valveS3L:3/2 way single-way roll protrude trans-portation type mechanical valveS3V:3/2 way single-way vertical prang type mechanical valve
S3R - M5
Port sizeM5: M506: PT1/808: PT1/4
Model S3R S3L S3V
Dimensions
Change way stroke
Fluid
Port Size
Operating pressure
Operating temperature
Lubrication
Air
M5: M5 06: PT1/8 08: PT1/4
0~8Kgf/cm2
-5~60℃
Not required
S3BModel A
16
23
24
M5
06
08
B
26
30
34
C
15
20.5
22.5
D E
36
47
52
F
M5×0.8
M5×0.8
M5×0.8
G
16.5
16.5
17.5
H
9
11.5
12
I
13
17.5
21
J
M5×0.8
PT1/8
PT1/4
30
41
46
Change way stroke / ModelAxes stroke rangeRoller stroke range
S3R S3L S3V2.4~3.8
3.4~4.8
2.4~3.0
4.5~6.0
2.4~3.0
4.8~6.2
S3R Control head
S3L Control head
S3V Control head A B
M50608
263034
16.516.517.5
34
Flow Control Valve
Ordering code
Series ASC: Accurate type Flow Control valve
Port size06: G1/8″08: G1/4″10: G3/8″15: G1/2″
- ASC 08
Series RE: Ordinary type fl ow Control valve
Port size01: G1/8″02: G1/4″03: G3/8″04: G1/2″
- RE 01
Specifi cations
Symbol
Model
Port size
Fulid
Operating pressure
Operating temperature
ASC-06
Air
0~0.95MPa
0~60℃
Accurate type Ordinary type
ASC-08 ASC-10 ASC-15 RE-01 RE-02 RE-03 RE-04
G1/4″ G3/8″ G1/2″ G1/8″ G1/4″ G3/8″ G1/2″
SV-01 SV-02
G1/8″G1/8″ G1/4″
Series SV: Accurate type fl ow Control valve
- SV 01
Port size01: G1/8″02: G1/4″
35
Flow Control Valve
Dimensions
AModel / symbol B C
ASC-06
ASC-08
ASC-10
ASC-15
22
26
28
28
32
36
40
40
G1/8
G1/4
G3/8
G1/2
D E F
22
22
25
30
27
27
30
35
4.3
4.3
4.3
4.3
G H I
49.7
49.7
52.7
58.7
56.5
56.5
59.5
65.5
M6×0.5
M6 ×0.5
M6 ×0.5
M6×0.5
J
M12×0.75
M12×0.75
M12×0.75
M12×0.75
K L
12
12
13
13.5
18
18
22
26
AModel / symbol B
RE-01
RE-02
RE-03
RE-04
45
45
55
55
19
19
25
25
C
43
43
55
55
D E
50
50
62
62
φ19
φ19
φ25
φ25
F
M14×1
M14×1
M18×1
M18×1
G
G1/ 8
G1/ 4
G3/ 8
G1/ 2
Dimensions
ASC-08B SV、ASC
RE Series
36
Ordering code
SeriesQE: Quick exhaust valve
Symbol
Dimensions
LBore
QE-01
QE-02
QE-03
QE-04
Specifi cations
Model
Fluid
Effective area
Port size
Operating pressure
Operating temperature
Air
QE-01
16mm2
G1/8″
QE-02 QE-03
0~0.8MPa
0~60℃
27.5mm2
G1/4″
72.5mm2
G3/4″
QE-04 QE-06
28mm2
G3/8″
71mm2
G1/2″
- QE 01
Port size01: G1/8″ 02: G1/4″ 03: G3/8″
04: G1/2″ 06: G3/4″
Model / Symbol
G1/8
G1/4
G3/8
G1/2
W H D
39
54
54
66
18
28
28
28
27
36
36
36
35
50
50
50
Quick Exhaust Valve
37
Shuttle Valve
Ordering code
SeriesST: Shuttle valve
Symbol
Dimensions
Specifi cations
- ST 01
Port size01: G1/8″ 02: G1/4″ 03: G3/8″
04: G1/2″ 06: G3/4″ 08: G1″
Model
Fluid
Effective area
Port size
Operating pressure
Operating temperature
Air
ST-01
7.5mm2
G1/8″
ST-02 ST-03
0~1.0MPa
0~60℃
21mm2
G1/4″
110mm2
G3/4″
ST-04 ST-06
40mm2
G3/8″
60mm2
G1/2″
ST-08
190mm2
G1″
AModel / Symbol B C D E F G
ST-01
ST-02
ST-03
ST-04
ST-06
ST-08
40
50
75
75
110
110
24
35
48
48
72
72
16
22
30
30
40
40
4.5
5.5
7
7
7
7
25
35
50
50
70
70
20.5
25
42
42
58
58
G1/8″
G1/4″
G3/8″
G1/2″
G3/4″
G1″
38
Foot Valve
Ordering code
Specifi cation4F: 5/2 way foot valve
Port size08: G1/4″
Type Blank:Standard typeL: with lockG: with coverLG: with lock and cover
Series 2: 200 Series
Specifi cation Foot valve
Position and way NO.320: 3/2 way420: 4/2 way
Number of places10: Single-head Double-position
L- 4F 082 - FV 32010
Specifi cations
Model
Fluid
Position and way NO.
Operation
Port size
Operating pressure
Operating temperature
4F210-08 4F210-08L 4F210-08G
40 micron fi ltered air
0~0.8MPa
0~60℃
5/2 way 4/2 way
Air inlet=Air outlet=Exhaust=G1/4″
4F210-08LG FV420 FV320
3/2 way
Air inlet=Air outlet=G1/4″Exhaust=G1/8″
Direct drive type
39
Foot Valve
Dimensions
4F210-08 4F210-08L
4F210-08G
4F210-08LG
40
Foot Valve
Dimensions
FV420
FV320
41
Ordering code
Foot Valve
- 4FM 2 10 08 L With lockWithout lock
Specifi cation 4FM: 4/2 way mini foot valve
Series 2: 200 series
Number of places10: Single-head Double-position
Port size06: PT1/808: PT1/4
Type Blank:Standard typeL: With lock
Specifi cations
Dimensions
Model
Fluid
Position and way NO.
Operation
4FM210-06 4FM210-06L 4FM210-08
Air
0~0.8Kgf/cm2
-5~60℃
4/2 way
Air inlet=Air outlet=PT1/8
4FM210-08L
Air inlet=Air outlet=PT1/4
Not required
Direct drive type
Symbol
Port size
Operating pressure
Operating temperature
Lubrication
4FM210 4FM210L
42
Hand-Draw Valve
Specifi cations
Dimensions
Specifi cation 4R: 5/2 way hand-draw valve3R: 3/2 way hand-draw valve
Type M:Machinery locking typeS:Spring reset typeC:5/3 way center close down type
M
Ordering code
TSV86 M
Specifi cations
TSV98 232252
Dimensions
-
Position and way NO.5/2 way
Specifi cationHand-pull valve
Port size1:G1/8″2: G1/4″
Type M:Mach ine ry locking typeS:Spring reset type
-
Position and way NO.3/2 way
TSV98322 MSTSV86522 M
SModel
Fluid
Operation
Effective area
Port size
Operating pressure
Operating temperature
40 micron fi ltered air
Direct drive type
18mm2(CV=1.00)
G1/4″
0~0.8MPa
0~60℃
TSV86522 TSV98322
47
Piping Exhaust Valve
Symbol This valve is a 3/2-way sliding valve,which is usually installed in the piping to turn on/off airs.When it is turned off, the air pressure in the pneu-matic system is exhausted simultaneously.
S2: Through piston rodK2: Extended male piston rod threadK3: Female piston rod threadK7: Piston rod with external hexagonK8: Extended piston rod
S2
Bore
63
CushioningBlank: Without cushioningPPV: With cushioning
PPV
Ordering code
Specifi cations
32Bore (mm) 63
Fluid
Operation
Proof pressure
Max. operating pressure
Min. operating pressure
Cushioning
Ambient temperature
Operating piston speed
Allowable stroke tolerance
Operating life
Lubrication
Port size
40 12550 80
1/8″ 1/4″ 1/2″3/8″
+1.00
+1.50
+2.00
Filtered air
Double acting
1.5MPa
1.0MPa
0.1MPa
Air cushioning (Standard)
5~60℃
50~500mm/s
0~250 251~1000 1001~1500
Not less than 4000Km
Not required
55
100
Standard stroke
32
40
50
63
80
100
Bore Cushioning length PPV
25 40 50 80
100 125 160
200 250 320
400 500
10~2000
20
22
32
Max. stroke range
32
40
50
63
80
100
Bore Min. stroke of proximity sensor
KCK2400C
embedding type
Type of proximity sensor
32
40
50
63
80
100
Construction
Component parts
Name
1
2
3
4
5
6
7
8
No.
Nut
Piston rod
Axes envelop
Guide envelop
Rod bolt
Front cover
Cushioning seal
Cushioning piston
35
45
PU
Sleeve bearing
35
ZZnAI4-1
NBR
POM
Material Name
9
10
11
12
13
14
15
16
17
No. Material
A6063-TS
NBR
F4
Magnetic plastic
NBR
LY12
LY12
ZZnAI4-1
HPb59-1
DNC Series ISO6431 Standard Cylinder
Stroke
Cylinder tube
“Y”Ring
Washer
Magnetic ring
“O”Ring
Front and back piston
Compaction nut
Back cover
Adjustable valve pin
56
Dimensions
DNC...PPV-A
Dimensions
Basic type
32
40
50
63
80
100
125
30
35
40
45
45
55
60
L15
146
165
180
195
220
240
291
VD
18
21.5
28
28.5
34.7
38.2
46
ZB
120
135
143
158
174
189
225
DNC Series ISO6431 Standard Cylinder
32
40
50
63
80
100
125
AM
22
24
32
32
40
40
54
B
30
35
40
45
45
55
60
D2
12
16
20
20
25
25
32
D5
32.5
38
46.5
56.5
72
89
110
D7
M6
M6
M8
M8
M10
M10
M12
E
45
54
64
75
94
112
134
1/8
1/4
1/4
3/8
3/8
1/2
1/2
J3
6
8
10
12.4
12.5
11.8
13
J4
5.2
6
8.5
10
8
10
8
KK
M10×1.25
M12×1.25
M16×1.5
M16×1.5
M20×1.5
M20×1.5
M27×2
L2
41.6
44
51
54
62.4
69.8
83
L3
62.8
77
78
87
95.2
100.4
124
L4
4
4
4
4
4
4
6
L5
26
29.5
30
35.5
36
39
36
L6
16
16
17
17
17
17
22
L7
3.3
3.6
5.1
6.6
10.5
8
14
L8
10
10.5
11.5
15
15.7
19.2
20.5
SW1
10
13
17
17
22
22
27
SW2
6
6
8
8
10
10
8
VD
18
21.5
28
28.5
34.7
38.2
46
WH
26
30
37
37
46
51
65
ZB
120
135
143
158
174
189
225
Bore EE(G)
DNC...PPV-A-S2
Bore B
+ = Plus stroke length++ = Plus 2 stroke lengths
57
Through piston rod type
Dimensions
Dimensions
Bore
32
40
50
63
80
100
AB
7
10
10
10
12
14.5
E
45
54
64
75
93
110
SA
142
161
170
185
210
220
XA
144
163
175
190
215
230
AO
6.5
9
10.5
12.5
15
17.5
AH
32
36
45
50
63
71
H1
5
5
6
6
6
6
TR
32
36
45
50
63
75
C1
30.5
37
41.5
44.5
56
58.5
32
40
50
63
80
100
50
55
65
75
100
120
TF
64
72
90
100
126
150
W
16
20
25
25
30
35
ZF
130
145
155
170
190
205
H3
10
10
12
12
16
16
FB H13
7
9
9
9
12
14
UF
80
90
110
125
154
186
R
32
36
45
50
63
75
DNC Series ISO6431 Standard Cylinder
HNC...PPV-A foot mounting
FNC...PPV-A fl ange mounting
Bore E2
+ = Plus stroke length
+ = Plus stroke length
58
Bore
32
40
50
63
80
100
CB
26
28
32
40
50
60
L
13
16
16
21
22
27
UB
45
52
60
70
90
110
XD
142
160
170
190
210
230
E3
55
63
71
83
103
127
CD
10
12
12
16
16
20
MR
10
12
12
16
16
20
H2
6
6
7
7
10.5
10.5
DNC Series ISO6431 Standard Cylinder
Dimensions
SNCB...PPV-Asingle clevis
SNCL...PPV-Adouble clevis
+ = Plus stroke length
+ = Plus stroke length
59
SC Series Standard Cylinder
TypeSC:Pull rod typeSU: Hidden pull rod type
SC D
Blank: Standard double actingD:Double-shaft double actingJ: Double-shaft and adjustable stroke type
Bore
50
SCJ adjustable stroke typeSUJ adjustable stroke type
25
Stroke
50X
Magnet S: With magnet Blank: Without magnet
S
MountingBlank: Basic typeLB: Front and back fi xedFA: Front cover fi xation (Front fl ange)FB: Back cover fi xation (Rear fl ange)CA: Back cover fi xation (Single Clevis)CB: Back cover fi xation (double Clevis)TC: Centre TurnnionTC-M: Swinging type attaching foot seat
TypeMAL:Double actingMSAL:Single acting MALD:Double-shaft double actingMALJ:Double-shaft and adjustable stroke type
Ordering code
MAL CA
Back cover typeCA: Fishtail typeCM: Rounded typeU: Horizontal type
Bore
50
MALJ adjustable stroke type
25
Stroke
50X
Magnet S: With magnetBlank: Without magnet
S
MountingBlank:Basic typeLB:Front and back fi xed typeFA:Front cover fi xed typeSDB:Back cover swinging type
LB
Specifi cations
16Bore (mm) 3220 40
Basic FA LB SDB
1.0~9.0 Kgf/cm2
13.5 Kgf/cm2
0~70℃
50~800 mm/s
Rubber bumper
M5×0.8 G1/8″
25
70
Operation
Fluid
Mounting
Operating pressure
Ensured proof pressure
Operating temperature
Operating piston speed
Cushioning
Port size
Double acting or single acting
Air
Dimensions
A
16
20
25
32
40
A1 A2 B C D E F G H I J K
104
131
135
141
165
104
122
128
128
152
38
40
44
44
46
52
70
70
70
92
24
28
30
30
32
M6×1
M8×1.25
M10×1.25
M10×1.25
M12×1.25
10
12
17
17
17
5
6
6
6
7
14
12
14
14
14
11
16
16
16
22
16
20
22
22
24
90
110
114
114
138
15
21
21
27
27
D1
15
12
14
14
14
LBore / Symbol
16
20
25
32
40
M P Q R S U V W X AR
M16×1.5
M22×1.5
M22×1.5
M24×2.0
M30×2.0
6
8
8
10
12
12
16
16
16
20
6
12
12
15
15
M5
G1/8
G1/8
G1/8
G1/4
7
7
7
8
9
20
29
34
39.5
49.5
6
8
10
12
16
/
6
8
10
14
8
10
12
12
12
13
19
19
25
25
R1
13
12
14
14
14
AX
24
33
33
37
47
AY
27.5
29
29
32
41
MAL-CA
MAL-CM
MAL-U
Bore / Symbol
71
MAL Series Aluminum Alloy Mini Cylinder
Dimensions
ASymbol
20
25
32
40
A1 A2B
131
135
141
165
156
160
166
190
147
153
153
177
110
114
114
138
95
95
95
117
122
128
128
152
40
44
44
46
70
70
70
92
Bore / Stroke 0~50 51~100 51~100 0~50
C
0~50 51~100
135
139
139
163
D D1 E F G H I
12
14
14
14
28
30
30
32
12
17
17
17
21
21
27
27
16
16
16
22
20
22
22
24
12
14
14
14
20
25
32
40
M22×1.5
M22×1.5
M24×2.0
M30×2.0
19
19
25
25
M8×1.25
M10×1.25
M10×1.25
M12×1.25
8
8
10
12
16
16
16
20
10
12
12
12
8
10
12
16
6
8
10
14
29
29
32
41
12
14
14
14
7
7
8
9
33
33
37
47
G1/8
G1/8
G1/8
G1/4
MK L
J
6
6
6
7
P R1 S U V W X ARQ R AX AY
12
12
15
15
29
34
39.5
49.5
51~100
MSAL-CA
MSAL-CM
MSAL-U
Bore / Symbol
72
MAL Series Aluminum Alloy Mini Cylinder
Dimensions
MALD
A
20
25
32
40
A1 B C E F G H I J K
131
135
141
165
40
44
44
46
70
70
70
92
M8×1.25
M10×1.25
M10×1.25
M12×1.25
12
17
17
17
6
6
6
7
12
14
14
14
16
16
16
22
20
22
22
24
122
128
128
152
28
30
30
32
LBore/Symbol
20
25
32
40
M U V X AR AX AY
M22×1.5
M22×1.5
M24×2.0
M30×2.0
10
12
12
12
29
34
39.5
49.5
33
33
37
47
29
29
32
41
G1/8
G1/8
G1/8
G1/4
7
7
8
9
8
10
12
16
W
6
8
10
14
T
19
21
21
21
Bore/Symbol
MALJ
73
MAL Series Aluminum Alloy Mini Cylinder
SeriesDSNU: DSNU seriesDSNUL: DSNUL series
Ordering code
DSNU
Stroke
P
Bore
25
DSNU / DSNUL Series ISO6432 Stainless Steel Mini Cylinder
50
Position sensingBLank:Without magnetA:With built-in magnet
A
CushioningP:Without cushioningPPV:With cushioning
Sectional view
CharacterNon touched reaction testing accord withISO6432 standard cylinder.φ8~φ25mm
74
1 Sensor swith2 Accessory3 Wrench’s position Port
AMBore / Symbol
8
10
12
16
20
25
12
12
16
16
20
22
B1 f8
-
-
5.5
5.5
7
9
BE
M12×1.25
M12×1.25
M16×1.5
M16×1.5
M22×1.5
M22×1.5
φCD
4
4
6
6
8
8
φD h9
15
15
20
20
27
27
φD5
12
12
16
16
22
22
φD6
9.3
11.3
13.3
17.3
21.3
26.5
EE
M5
M5
M5
M5
G1/8
G1/8
EW
8
8
12
12
16
16
J1
20.4
22
22
22.5
26.5
31.5
J2
16.5
18.2
20
22.5
22.5
25
J3
23.2
25.9
28.6
33.2
35.3
40.2
J4
13.9
13.8
11
11
13
16
KK
8
10
12
16
20
25
M4
M4
M6
M6
M8
M10×1.25
KV
19
19
24
24
32
32
KW
6
6
8
8
11
11
L
6
6
9
9
12
12
L1
78
78
89
95
112
119.5
L2
22
22
28
28
32
36
L3
34
34
38
44
51.6
53.1
L4
12
12
17
17
20
22
L5
10
10
15
15
18
20
L15
78
78
94
100
116
125.5
L16
62
62
72
78
92
97.5
SW2
-
-
5
5
7
9
WH
16
16
22
22
24
28
XC
64
64
75
82
95
104
DSNU / DSNUL Series ISO6432 Stainless Steel Mini Cylinder
Dimensions
Bore / Symbol
+ = Plus stroke length++ = Plus 2 stroke lengths
75
SDA Series Thin Type Cylinder
TypeSDA: Double actingSSA:Single acting extrusion typeSTA: Single acting drawing-in typeSDAD:Double-shaft type
Ordering code
SDA
Bore
20
Stroke
30X
Magnet S: With magnetBlank: Without magnet
S
ThreadBlank:Female threadB: Male threadN: No thread
LB
Specifi cations
StrokeBore (mm)
With magnet
Withoutmagnet
Withoutmagnet
Max. Stroke
12 16 20 25 32 40 50 63 80 100
5~60 mm Every 5mm is
grouped as one grade
5~50 mm Every 5mm is
grouped as one grade
5~90 mm Every 5mm is
grouped as one grade
5~90 mm Every 5mm is
grouped as one grade
100~110 mm Every 5mm is
grouped as one grade
100mm
5~90 mm Every 5mm is
grouped as one grade
-
60mm 100mm 120mm 130mm
With magnet
12Bore (mm) 16 25 32 63 100
Fluid
20 40 50
Double acting
Air
1.0~9.0 Kgf/cm2
10.5 Kgf/cm2
0~70℃
M5×0.8 G3/8″G1/8″ G1/4″
80
Operation
Operatinag pressure
Port size
Proof pnessure
Operating temperature
Operating piston speed
Single acting extrusion type Single acting drawing-in type -
2.0~9.0 Kgf/cm2 -
30~500 mm/s
100~500 mm/s
30~350 mm/s 30~250 mm/s
-Single acting
Double acting
Single acting
Double acting
5~85 mm Every 5mm is
grouped as one grade
5~75mm Every 5mm is
grouped as one grade
100~130 mm Every 5mm is
grouped as one grade
5~30 mm Every 5mm is
grouped as one grade5~30 mm
Every 5mm is grouped as one grade
5~30 mm Every 5mm is grouped as one grade
5~30 mm Every 5mm is grouped as one grade
Double acting
Single acting
5~90 mm Every 5mm is
grouped as one grade
100~120 mm Every 5mm is
grouped as one grade
76
-
DimensionsSDA12-16 SDA20-100
A
TypeB
22
24
25
27
31.5
33
37
41
52
63
5
5.5
5.5
6
7
7
9
9
11
12
32
34
35
37
41.5
43
47
51
62
73
5
5.5
5.5
6
7
7
9
9
11
12
4
4
4
4
4
4
5
5
6
7
17
18.5
19.5
21
24.5
26
28
32
41
51
-
-
36
42
50
58.5
71.5
84.5
104
124
6
6
8
10
12
12
15
15
15
18
27
28.5
29.5
34
34.5
36
38
42
51
61
E F G N1 N3
M3×0.5
M3×0.5
M4×0.7
M5×0.8
M6×1
M8×1.25
M10×1.5
M10×1.5
M14×1.5
M18×1.5
10.2
11
16
17
22
28
38
40
45
55
M5×0.8
M5×0.8
M5×0.8
M5×0.8
G1/8
G1/8
G1/4
G1/4
G3/8
G3/8
1
1.5
1.5
2
3
3
4
4
5
5
6.3
7.3
7.5
8
9
10
10.5
11.8
14.5
20.5
6
6.5
-
-
-
-
-
-
-
-
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
4
4
OWith magnet
B1 C A
Standard typeK1 L M
B1 C
P3
4.5
4.5
4.5
5.5
5.5
7.5
8.5
8.5
10.5
13
12
12
14
15
16
20
25
25
25
30
P4 R S W X
25
29
34
40
44
52
62
75
94
114
23
28
-
-
-
-
-
-
-
-
-
-
11.3
12
18.3
21.3
30
28.7
36
35
6
6
8
10
12
16
20
20
25
32
5
5
6
8
10
14
17
17
22
27
1.6
1.6
2.1
3.1
2.15
2.25
4.15
3.15
3.65
3.65
12
16
20
25
32
40
50
63
80
100
T1 U VBore / Symbol YT2P1
16.2
19.8
24
28
34
40
48
60
74
90
-
-
10
10
15
16
20
20
26
26
Bore / Symbol
12
16
20
25
32
40
50
63
80
100
Thread : M5×0.8Double side:φ6.5
Thread : M5×0.8Double side:φ6.5
Thread : M5×0.8
Thread : M6×1.0
Thread: M6×1.0
Thread : M8×1.25
Thread : M8×1.25
Thread : M8×1.25
Thread: M12×1.75
Thread : M12×1.75
-
-
2
2
6
6.5
9.5
9.5
10
10
77
Double side:φ6.5
Double side:φ10
Double side:φ11
Double side:φ11
Double side:φ14
Double side:φ17.5
Double side:φ8.2
Double side:φ8.2
Through hole:φ4.2
Through hole:φ4.2
Through hole:φ4.2
Through hole:φ4.6
Through hole:φ4.6
Through hole:φ6.5
Through hole:φ6.5
Through hole:φ6.5
Through hole:φ9.2
Through hole:φ11.3
SDA Series Thin Type Cylinder
Dimensions
A
Type
32
34
35
37
41.5
43
42
44
45
47
51.5
53
27
28.5
29.5
34
34.5
36
37
38.5
39.5
41
44.5
46
47
48.5
49.5
51
54.5
56
5
5.5
5.5
6
7
7
52
54
55
57
61.5
63
37
38.5
39.5
41
44.5
46
42
44
45
47
51.5
53
D E L
1
1.5
1.5
2
3
3
6.3
7.3
7.5
8
9
10
-
-
36
42
50
58.5
10.2
11
16
17
22
28
2.8
2.8
2.8
2.8
2.8
2.8
M3×0.5
M3×0.5
M4×0.7
M5×0.8
M6×1
M8×1.25
MWith magnet
>10B1
Standard typeF G K1
≤10C
>10≤10A
>10B1
≤10C
>10≤10
N1 N3
5
5.5
5.5
6
7
7
6
6
8
10
12
12
4
4
4
4
4
4
6
6.5
-
-
-
-
M5×0.8
M5×0.8
M5×0.8
M5×0.8
G1/8
G1/8
12
12
14
15
16
20
Bore /Symbol P4 R V
16.2
19.8
24
28
34
40
-
-
11.3
12
18.3
21.3
4.5
4.5
4.5
5.5
5.5
7.5
6
6
8
10
12
16
5
5
6
8
10
14
1.6
1.6
2.1
3.1
2.15
2.25
W
12
16
20
25
32
40
S T1 T2 X Y
-
-
2
2
6
6.5
25
29
34
40
44
52
-
-
10
10
15
16
O P1 P3 U
23
28
-
-
-
-
SSA12-16 SSA20-40
STA12-16 STA20-40
12
16
20
25
32
40
Double Side:φ6.5Threed : M5×0.8 Through Hole:φ4.2
Double Side:φ6.5 Threed : M5×0.8 Through Hole:φ4.2
Double Side:φ6.5 Threed : M5×0.8 Through Hole:φ4.2
Double Side:φ8.2 Threed : M6×1.0 Through Hole:φ4.6
Double Side:φ8.2 Threed : M6×1.0 Through Hole:φ4.6
Double Side:φ10 Threed : M8×1.25 Through Hole:φ6.5
Bore /Symbol Stroke
78
SDA Series Thin Type Cylinder
Dimensions
SDA Series Thin Type Cylinder
SDA,SSA,STA
B2
17
17.5
20.5
23
25
35
37
37
44
50
4
4
4
4
4
4
5
5
6
7
16
16
19
21
22
32
33
33
39
45
10
10
13
15
15
25
25
25
30
35
8
8
10
12
17
19
27
27
32
36
Bore / Symbol
1
1.5
1.5
2
3
3
4
4
5
5
E F G K2 L
4
4
5
6
6
8
11
11
13
13
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
4
4
6
6
8
10
12
16
20
20
25
32
10.2
11
16
17
22
28
38
40
45
55
W
12
16
20
25
32
40
50
63
80
100
H I J M V
M5×0.8
M5×0.8
M6×1.0
M10×1.25
M14×1.5
M18×1.5
M18×1.5
M22×1.5
M22×1.5
M26×1.5
5
5
6
8
10
14
17
17
22
27
79
Series codeTN:Dual-roddouble acting
Ordering code
TN
Stroke
50X
Magnet Blank:Without magnetS:With magnet
S
Specifi cations
Bore
20
TN Series Cylinder
Symbol
10Bore (mm) 20
Fluid
Operation
Operating pressure
Proof pressure
Operating temperature
Operating piston speed
Adjustable stroke
Cushioning
Non-gyratory precision
Port size
3216 25
No
0.4°
M5×0.8
Rubber bumper at both ends
0.3°
PT1/8″
Air
Double acting
0.1~0.9MPa
1.35MPa
0~70℃
100~500 mm/s
-10~0 mm
StrokeStandard stroke
10
16
20
25
32
10 20 30 40 50 60 70
10 20 30 40 50 60 70 80 90 100 125 150
10 20 30 40 50 60 70 80 90 100 125 150
10 20 30 40 50 60 70 80 90 100 125 150
10 20 30 40 50 60 70 80 90 100 125 150
Bore (mm) Max. Stroke
70
150
150
150
150
Allowable stroke100
200
200
200
200
80
Construction
TN Series Cylinder
10
16
20
25
32
Front cover seal ring
1
PDU-6
PDU-8
PDU-10
PDU-12
PDU-16
1
P12
P16
P20
P20
P25
O-ring list
Bore/Number
Front & rear cover “O” ringPiston “O” ring Piston rod “O” ring
2
APA-10
APA-16
APA-20
APA-25
APA-32
2
10×1.5
16×1.5
20×1.5
25×1.5
32×1.5
Component partsName
1
2
3
4
5
6
7
8
9
10
11
No.
-
PU
-
-
Free machining iron
-
Spring steel
NBR
Aluminum alloy
-
Aluminum alloy
Material Name
12
13
14
15
16
17
18
19
No.
Bumper
Piston
Magnet
Piston “O” oring
Wearing ring
Rear cover “O” oring
“C” type clip
Rear cover
Material
PU
Aluminum alloy
Magnetic material
NBR
-
NBR
Spring steel
Aluminum alloy
Hexagon socket head cap screw
Bumper
Adjusting screw
Axes
Front board
Front compaction
“C” type clip
Front cover “O” ring
Front cover
Axes axletree
Housing
81
Dimensions
φ10
Dimensions
TN Series Cylinder
Symbol
10
A
58
30
35
50
45
70
55
C
46
B
12
40
40
20
30
D
10
10
30
60
50
E
Bore/Symbol
φ32
Symbol
32
A
108
C
78
B
30
D
35
Bore/Symbol
E
50
65
90
85
150
115
70
75
30
55
10
45
125
102.5
60
70
100
90
80
80
40
60
20
50
82
TN Series Cylinder
Dimensions
φ16 ~φ25
Symbol
16
20
25
A
68
78
81
B
15
20
19
C
53
58
62
D
20
20
30
F
8
10
10
G
47
55
66
H
6
9
8
I
24
28
34
10
30
35
40
20
35
35
40
30
40
40
45
40
45
45
50
50
50
50
55
60
55
55
60
70
60
60
65
80
65
65
70
90
70
70
75
100
75
75
80
125
87.5
87.5
92.5
150
100
100
105
E
16
20
25
J
M4×0.7Depth5
M4×0.7Depth5
M4×0.8Depth6
Bore/Symbol K
47
55
66
L
53
61
72
M
20
24
29
N1
22
25
30
N2
10
12
12
P1
2 Sidesφ7.5 Depth 7.2mm,Through:φ4.5
2 Sidesφ7.5 Depth 7.2mm,Through:φ4.5
2 Sidesφ7.5 Depth 7.2mm,Through:φ4.5
P2
2 Sidesφ8 Depth 4.4mm,Through:φ4.5
2 Sidesφ8 Depth 4.4mm,Through:φ4.5
2 Sidesφ8 Depth 4.4mm,Through:φ4.5
Q
34
44
56
R
4
6
7
S
54
62
73
T
21
25
30
V
8
10
12
W
Bore/Symbol
6.2
8.2
10.2
83
Front board dimensions
Allow the side toward load
*1Kgf=9.81N
TN Series Cylinder
φ16 ~φ25
10
16
20
25
32
Bore/Symbol PA
18
24
28
34
42
P1
φ6.2 Depth 3.5mm,Through:φ4.5
φ7.8 Depth 4.6mm,Through:φ4.5
φ11 Depth 6.8mm,Through:φ4.5
φ11 Depth 6.8mm,Through:φ4.5
φ17 Depth 12mm,Through:φ4.5
P2
M3×0.5 Depth 5mm
M4×0.7 Depth 46mm
M6×1 Depth 48mm
M6×1 Depth 48mm
M10×1.5 Depth 14mm
PB
0.5
1
1
1
2
PD
5.2
6.2
8.2
10.2
14
PE
6
8
10
12
16
PF
3
3
3
3
3
PG
5.2
6.2
8.2
10.2
14
84
Air Combination (F.R.L Combination)AC1000~5000 Series
*Under the circumstance that the inlet pressure is 0.7MPa (7.1kgf/cm2) and the set pressure is 0.5MPa(5.1kgf/cm2)** Rc and NPT port sizes are available.
Fluid
Proof pressure
Max. operating pressure
Ambient and fl uid temperature
Nominal fi ltration rating
Recommended lubricant
Bowl material
Bowl guard
Set pressure range
Regulator construction
Air
1.5MPa(15kgf/cm2)
1.0MPa(10kgf/cm2)
5~60℃
5μm 25μm 50μm
Class 1 turbine oil (ISO VG32)
PC K1300
AC1000~2000(Not available) AC2500~5000(Available)
AC1000:0.05~0.7MPa(0.5~7kgf/cm2)
AC2000~5000:0.05~0.85MPa(0.5~8.5kgf/cm2)
Relieving type
G27-10-R1
G36-10-01
G46-10-02
Model
Specifi cations
AC1000-M5
AC2000-01
AC2000-02
AC2500-02
AC2500-03
AC3000-02
AC3000-03
AC4000-03
AC4000-04
AC4000-06
AC5000-06
AC5000-10
Component
Filter Regulator Lubricator*Rated fl ow(L/min)
**Port size (G)
Pressure gauge port size
Weight(kg)
Bracket(2PCS)
AR1000
AR2000
AR2500
AR3000
AR4000
AR4000-06
AR5000
500
1500
2000
4000
5000
4500
M5
1/8
1/4
1/4
3/8
1/4
3/8
3/8
1/2
3/4
3/4
1
1/16
1/8
1/8
1/8
1/4
1/4
1/4
0.26
0.74
1.04
1.18
2.14
2.47
3.82
Y10L
Y20L
Y30L
Y30L
Y40L
Y50L
Y60L
Accessories
Pressure gauge
90AL1000
AL2000
AL3000
AL3000
AL4000
AL4000-06
AL5000
AF1000
AF2000
AF3000
AF3000
AF4000
AF4000-06
AF5000
Specifi cations Symbol
85
P
38.5
50
70.5
70.5
88
88
115
Model
AC1000
AC2000
AC2500
AC3000
AC4000
AC4000-06
AC5000
Port Size G
M5
1/8~1/4
1/4~3/8
1/4~3/8
3/8~1/2
3/4
3/4~1
A
91
140
181
181
238
253
300
B
84.5
125
156.5
156.5
191.5
193
271.5
C
25.5
38
38
38
41
40.5
48
D
25
40
53
53
70
70
90
E
26
56.8
60.8
60.8
65.5
69.5
75.5
F
25
30
41
41
50
50
69.8
G
33
50
64
64
84
89
105
H
20
24
35
35
40
40
50
J
4.5
5.5
7
7
9
9
12
K
7.5
8.5
11
11
13
13
16
L
5
5
7
7
7
7
10.5
M
17.5
22
34.2
34.2
42.2
46.2
55.2
N
16
23
26
26
33
36
40
Dimensions
AC1000~2000
Air Combination (F.R.L Combination)AC1000~5000 Series
AC2500~5000
86
Air Combination (FR. L Combination)
Air
1.5MPa(15kgf/cm2)
1.0MPa(10kgf/cm2)
5~60℃
5μm 25μm 50μm
Class 1 turbine oil (ISO VG32)
PC K1300
AC1010~2010(Not Available) AC3010~5010(Available)
AC1010:0.05~0.7MPa(0.5~7kgf/cm2)
AC2010~5010:0.05~0.85MPa(0.5~8.5kgf/cm2)
Relieving type
*Under the circumstance that the inlet pressure is 0.7MPa (7.1kgf/cm2)and the set pressure is 0.5MPa(5.1kgf/cm2)** Rc and NPT port sizes are available.
Specifi cations Symbol
AC1010~5010 Series
G27-10-R1
G36-10-01
Model
AC1010-M5
AC2010-01
AC2010-02
AC3010-02
AC3010-03
AC4010-03
AC4010-04
AC4010-06
AC5010-06
AC5010-10
Component
Filter & Regulator Lubricator*Rated Flow(L/min)
**Port Size (G)
Pressure gauge port size
Weight(kg) Bracket
AW1000
AW2000
AW3000
AW4000
AW4000-06
AW5000
AL1000
AL2000
AL3000
AL4000
90
500
1700
3000
3000
1/16
1/8
1/8
1/4
0.22
0.66
0.98
1.93
1.99
Y10T
Y20T
Y30T
Y40T
G46-10-02AL4000-06
AL5000 4000
M5
1/8
1/4
1/4
3/8
3/8
1/2
3/4
3/4
11/4
1/4
3.20
Y50T
Y60T
Specifi cations Accessories
Pressure gauge
Fluid
Proof pressure
Max. operating pressure
Ambient and fl uid temperature
Nominal fi ltration rating
Recommended lubricant
Bowl material
Bowl guard
Set pressure range
Regulator construction
87
AC1010~2010
Dimensions
PPort size G A B C D E F G H J K L M N
AC1010
AC2010
AC3010
AC4010
AC4010-06
AC5010
M5
1/8~1/4
1/4~3/8
3/8~1/2
3/4
3/4~1
58
90
117
154
164
195
109.5
164.5
211
262
267
338
50.5
78
92.5
112
114
116
25
40
53
70
70
90
26
56.8
60.8
70.5
70.5
75.5
25
30
41
50
50
69.8
38.5
50
70.5
88
88
115
29
45
58.5
77
82
97.5
20
24
35
40
40
50
4.5
5.5
7
9
9
12
7.5
8.5
11
13
13
16
5
5
7
7
7
10.5
17.5
22
34.2
42.2
46.2
55.2
16
23
26
33
36
40
Model
Air Combination (FR. L Combination)AC1010~5010 Series
AC3010~5010
88
*Under the circumstance that the inlet pressure is 0.7MPa (7.1kgf/cm2)and the set pressure is 0.5MPa(5.1kgf/cm2)** Rc and NPT port sizes are available.
Model
Specifi cations
AF1000-M5
AF2000-01
AF2000-02
AF3000-02
AF3000-03
AF4000-03
AF4000-04
AF4000-06
AF5000-06
AF5000-10
*Rated fl ow(L/min)
**Port size (G)
Weight(kg) Bracket
110
750
1500
4000
6000
Accessories
7000
M5
1/8
1/4
1/4
3/8
3/8
1/2
3/4
3/4
1
Oil capacity(CM3
)
Model of AF series with auto drain
Drain function
4
15
20
45
45
130
0.07
0.19
0.29
0.55
0.58
1.08
-
B240
B340
B440
B540
B640
Manual drain
AF4000-03D
AF4000-04D
AF4000-06D
AF5000-06D
AF5000-10D
a.Air shutoff drainb.Manual drain
Air
1.5MPa(15kgf/cm2)
1.0MPa(10kgf/cm2)
5~60℃
5μm 25μm 50μm
PC K1300
AF1000~2000(Not Available) AF3000~5000(Available)
Specifi cations Symbol
Air FilterAF1000~5000 Series
Fluid
Proof pressure
Max. operating pressure
Ambient and fl uid temperature
Nominal fi ltration rating
Bowl material
Bowl guard
89
AF1000-2000 AF5000
NO. Description
Body
Filter element
Baffl e
Bowl O-ring
Bowl assembly(bowl guard)
Whirlwind blade
O-ring
Sealing washer
Housing
Material
Aluminum die-cast
Brass
POM
NBR
Polycarbonate(Cold rolled steel)
POM
NBR
NBR
Aluminum die-cast
1
2
3
4
5
6
7
8
9
Construction
Component parts
Air FilterAF1000~5000 Series
AF3000-4000
90
AF1000~2000
AF3000~4000
PModel Port Size G A B C D E F G H J K L M
AF1000
AF2000
AF3000
AF4000
AF4000-06
AF5000
M5
1/8~1/4
1/4~3/8
3/8~1/2
3/4
3/4~1
26.5
40
56
73
73
90
66
97.5
132.5
168.5
172.5
247.5
7
11
14
18
20
24
25
40
53
70
70
90
-
17
16
17
14
23
-
30
41
50
50
66.5
-
27
40
54
54
66
-
22
23
26
25
35
-
5.4
6.5
8.5
8.5
11
-
8.4
8
10.5
10.5
13
-
40
53
70
70
90
-
2.3
2.3
2.3
2.3
3.2
25
40
53
70
75
90
Dimensions
Air FilterAF1000~5000 Series
AF5000
91
Regulator
* Set pressure range:0.02~0.2MPa (0.2~2kgf/cm2)
*Under the circumstance that the inlet pressure is 0.7MPa (7.1kgf/cm2)and the set pressure is 0.5MPa(5.1kgf/cm2)** Rc and NPT port sizes are available.
Fluid
Proof pressure
Max. operating pressure
* Set pressure range
Ambient and fl uid temperature
Regulator construction
Air
1.5MPa(15kgf/cm2)
1.0MPa(10kgf/cm2)
AR1000: 0.05~0.7MPa (0.5~7kgf/cm2)
AR2000~5000: 0.05~0.85MPa (0.5~8.5kgf/cm2)
5-60℃
Relieving type
Model
Specifi cations
AR1000-M5
AR2000-01
AR2000-02
AR2500-02
AR2500-03
AR3000-02
AR3000-03
AR4000-03
AR4000-04
AR4000-06
AR5000-06
AR5000-10
*Rated fl ow(L/min)
**Port size (G)
Weight(kg) Bracket
M5
1/8
1/4
1/4
3/8
1/4
3/8
3/8
1/2
3/4
3/4
1
Pressure gauge
Accessories
Pressure gauge port size
100
550
2000
2500
6000
6000
8000
1/16
1/8
1/8
1/8
1/4
1/4
1/4
0.08
0.27
0.27
0.41
0.84
0.94
1.19
B120
B220
B220
B320
B420
G27-10-R1
G36-10-01
G36-10-01
G46-10-02
Specifi cationsSymbol
AR1000~5000 Series
92
Description
Body
Bonnet
Diaphragm assembly
Valve assembly
Spring
O-ring
Hand wheel
O-ring
O-ring
Material
NBR
Brass,NBR
Stainless steel
NBR
Reinforced nylon
NBR
NBR
NO.
1
2
3
4
5
6
7
8
9
AR1000 AR2000 ~ 3000 AR4000 ~ 5000
Aluminum die-castZinc die-cast
Aluminum die-castReinforced nylon
AR1000~5000
Construction Component parts
Model Port size G A B C D E F G H J K L M N
AR1000
AR2000
AR2500
AR3000
AR4000
AR4000-06
AR5000
M5
1/8~1/4
1/4~3/8
1/4~3/8
3/8~1/2
3/4
3/4~1
25
40
53
53
70
75
90
61.5
95
102.5
127.5
149.5
154
168
11
17
25
35
37.5
40.5
48
25
40
48
53
70
70
90
26
56.8
60.8
60.8
65.5
69.5
75.5
25
30
30
39
49.2
49.2
49.2
28
34
34
40
54
54
54
30
44
44
46
54
55.5
62
4.5
5.4
5.4
6.5
8.5
8.5
8.5
6.5
15.4
15.4
8
10.5
10.5
10.5
40
55
55
53
70
70
70
2
2.3
2.3
2.3
2.3
2.3
2.3
20.5
33.5
33.5
42.5
52.5
52.5
52.5
RegulatorAR1000~5000 Series
Dimensions
93
*Under the circumstance that the inlet pressure is 0.5MPa(5.1kgf/cm2),dripping fl ow rate is 5drops/minute,use of Class 1 turbine oil and 20℃ temperaure*Under the circumstance that the inlet pressure is 0.5MPa (5.1kgf/cm2)and the set pressure is 0.03MPa (0.3kgf/cm2).** Rc and NPT port sizes are available.
This product is the combination of fi lter, regulator and lubricator. It has tight structure, large fl ow rate, steady output and simple installation. The accessories include pressure gauge and mounting bracket. The lubricator can add oil with air on. All have the bowl guard. Use safely and appearance beautifully.
Model SFC-200 SFC-300 SFC-400
1/4Rc
1/8Rc
3/8Rc
1/8Rc
1/2Rc
1/8Rc
1.5MPa
1.0MPa
5~60℃
Available
Port size
Pressure gauge port size
Proof pressure
Max. operating pressure
Ambient and fl uid temperature
Bowl guard
Specifi cations Symbol
Dimensions
Air Combination
106
SL Series Lubricator
SFR Series Regulator & Filter
Adding oil with air on.
Pulling up the regulator's knob and turning the knob can regulate the pressure of compressed air to the set operating pressure, and can make pressure pulse bal-ance; press down the knob to lock it.
Model SL-200 SL-300 SL-400
1/4Rc 3/8Rc 1/2Rc
1.5MPa
1.0MPa
5~60℃
Available
Port size
Proof pressure
Max. operating pressure
Ambient and fl uid temperature
Bowl guard
Model SFR-200 SFR-300 SFR-400
1/4Rc
1/8Rc
3/8Rc
1/8Rc
1/2Rc
1/8Rc
1.5MPa
1.0MPa
5~60℃
Available
Port size
Pressure gauge port size
Proof pressure
Max. operating pressure
Ambient and fl uid temperature
Bowl guard
Dimensions Symbol
Specifi cationsFunction
Dimensions Symbol
Specifi cations
Operation Instructions
107
AD402 Series Auto Drain
Auto drain
Air shutoff drain
Manual drain
The bowl is provided with metal bowl guard
When using, the drainer should be installed vertically and the drain port should face down.
Symbol
Dimensions
Specifi cations
Features
Attention
Model
Proof pressure
Operating pressure
Ambient and fl uid temperature
Port size
Drain port size
Drain status
Fluid
AD402-02 AD402-03 AD402-04
1.5MPa
0.15MPa ~ 1.00MPa
5 ~ 60℃
G3/8″
G1/8″
Normal open type
Compressed air
This product often applies to automatically remove the seeper at the lower places of piping, refrigerated air dryer, oil water separator, gasometer and the bottom of various air fi lters. It can be installed in the places inconvenient for manual discharge of sewage, such high, low and narrow places, especially there is large consumption of air or frequent water drains. It can prevent the compressed air being re-polluted by condensing to water resulting from neglect of manual drain.
108
G1/4″ G1/2″
ZDFS Type Auto Discharger
This product is installed at the bottom of water cups of auto
drainers, air fi lters and air fi lter regulators. It can automatically
discharge the condensed water gathered in the water cup.
Auto drain
Air shutoff drain
Manual drain
Dimensions
Range of applicationFluid: Compressed air
Ambient and fl uid temperature : 5~60℃
Operating pressure : 0.15~1.00MPa
Technical requirements
FeaturesWhen using, the drainer should be installed vertically and the
drain port should face down.
Attention
Dimension of connecting part of water cup
109
Ordering code
Compact type
Al-alloy, Brass, Nylon, NBR
G1/4、G3/8、G1/2、G1
Upright place, board connection or wall installation
0~60℃(1MPa)
Painted
Structure type
Material
Port size
Installation type
Operating temperature
Surface coat
C Series Filter, Regulator & Lubricator Combination
Specifi cations
C Series fi lter, regulator & lubricator combination code
Specifi cation1=G1/42=G3/8、G1/24=G1
C series Port size04=G1/438=G3/802=G1/201=G1
Group typeC=D+LE=V+D+LG=D+L+AVPHNA=V+D+L+AVP+PRESS NOHNC=V+D+L+AVP+PRESS NCN=V+DP=D+AVPQ=V+D+AVPT=V+D+L+AVPU=F13+FB3(Only G3/8、G1/2、G1)ZNA=V+D+AVP+PRESS NOZNA=V+D+AVP+PRESS NC
- -
Filter precision5=5μm25=25μm
C C1 04 5
D
V
L
AVP
PRESS
F13
FB3
Regulator & fi lter combination,0~1MPasemi-auto drain,fi lter precision
5μm or 25μm
Lubricator
Filter auto drain(only G3/8、G1/2、G1),fi lter precision 5μm or 25μm
Gather fi lter auto drain(only G3/8、G1/2、G1)
Two-position three-way separate valve
Pressure switch (NC or NO)
Eletricity control soft start valve
110
DimensionsGroup type C Group type E Group type G Group type U
Group type PGroup type N Group type Q Group type T
Group type Z Group type HN
111
Compact Type,Diaphragm Type regualtor
Upright place,tube and board connection or wall installation
0~50℃(0.1MPa)
25μm(Standard )、5μm(Client required)
Semi-auto (standard), Auto (Client requiret)
Painted
0.03~1.6MPa
0.05~1.0MPa
C Series Regulator & Filter Combination
Ordering code
Specifi cation1=G1/42=G3/8、G1/24=G1
C series Port size04=G1/438=G3/802=G1/201=G1
D=Regulator+Filter
-
Filter precision and condensation water discharge
00=25μm,Semi-auto with exhaust entrance01=25μm,Semi-auto without exhaust entrance4=pressure release exhaust entrance8=G1/8 Port size (Outer exhaust entrance)10=5μm,Semi-auto with exhaust entrance11=5μm,Semi-auto without exhaust entrance*03=25μm,Auto with exhaust entrance*13=5μm,Auto with exhaust entranceNote : only G3/8、G1/2 and G1 have auto drain
C D1 04
Specifi cationsStructure type
Material
Port size
Max. pondage
Weight
Pressure gauge port size
Installation type
Operating temperature
Nominal fi ltration rating
Drain type
Surface coat
Inlet pressure
Outlet pressure
G1/4
28
0.510
G1/8
G3/8
85
0.700
G1/8
G1/2
85
0.690
G1/8
G1
380
2.280
G1/4
cm3
kg
Al- alloy based body & water storage cup engineering plastic observation window , nylon handle,NBR seals
FeaturesOne-touch tube fittings are used in pneumatic piping.The tube fittings come in a wide variety of models to meet all your needs in pneumatic piping.Even after installation, the direction of the tube can be changed freely.Nickel-plated metal body ensures anti-corrosion and anti-contamination.All R and NPT threads are pre-coated sealant.The teflon coating may duplicate use three times, there is no release in thread.
V O G U E P N E U M A T I C S V O G U E P N E U M A T I C S
PNEUMATIC ACCESSORY
Ningbo Vogue Pneumatics Industry Co.,Ltd. www.voguepc.com
125 126TEL:0086-574-88870283
FAX:0086-574-88870281
Resin body(PBT)
O-ring(NBR)
Metal body(Brass)
Lock claws(Stuinless)
Collar(Brass)
Sleeve(POM)
Nylon tube &Polyurethane tubeBack ring(Brass)
Packing(NBR)
Thread O-ring(NBR)
112
3
4
N-packing(NBR)
N-holder(Brass)Packing prop(POM)
H-packing(NBR)
Needle(Brass)Lock nut(Alumiunm)
Metal body(Brass)Packing(NBR)Back ring(POM)Collar(ZINC)
Sleeve(POM)Lock claws(SUS)
Resin body(PBT)O-ring(NBR)
Nylon tubePolyurethane tube
Control in type
Control out type
Speed Controllers
FeaturesAccurate regulation of an optimal airflow rate for precise motion control.The compact design provides the comparable range of speed as the larger ones do.Control-out and control-in types are available for all models.All R and NPT threads are pre-coated sealant.
FluidOperating pressureNegative pressureOperating temperatureTube material