EDI Manual Presentation notification GM01 AES Alle Rechte, auch die der Übersetzung, des Nachdruckes oder der Vervielfältigung des Dokumentes oder Teilen daraus, vorbehalten. Kein Teil des Dokumentes darf ohne Genehmigung der DAKOSY AG reproduziert, unter Verwendung elektronischer Systeme verarbeitet, vervielfältigt und verbreitet werden. EDI GM01 – Presentation notification ATL@S AES ZAPP AES specific additions and comments to the EDIFACT guide „The Electronic Export Declaration“ User manual Version 5.9.0/E (Valid from November 2017) Mattentwiete 2 20457 Hamburg www.dakosy.de Phone: + 49 40 37003 - 0 Fax: + 49 40 37003 - 370 [email protected]
87
Embed
GM01 Presentation notification ATL@S AES - DAKOSY · EDI Manual Presentation notification GM01 AES ... - Addition of the table „„List of data fields and corresponding ... addition
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EDI Manual Presentation notification GM01 AES
Alle Rechte, auch die der Übersetzung, des Nachdruckes oder der Vervielfältigung des Dokumentes oder Teilen daraus, vorbehalten. Kein Teil des Dokumentes darf ohne
Genehmigung der DAKOSY AG reproduziert, unter Verwendung elektronischer Systeme verarbeitet, vervielfältigt und verbreitet werden.
EDI
GM01 – Presentation notification
ATL@S AES ZAPP AES specific additions and comments to the EDIFACT guide „The Electronic Export
die Sitzungs-Numme r blei bt frei (space /bla nk), falls dieGestellungsmitteilung a us der DAKOSY D ialog-Anwendung“KAIDOS” direkt beim Kaibetrie b ausgedruck t wurde
*
C
4 MG
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 16 of 87
3.6 The reference confirmation record with B-number
(Transmission confirmation with B-number)
This sending confirmation with B-number is provided by DAKOSY for the sender of the HDS during the
transaction DY01 (HDS). It serves to confirm the correct communication with ZAPP and to transfer B numbers.
This reference confirmation record will be provided to recall by the sender immediately after the correct
incoming of a HDS at DAKOSY/ZAPP.
Fig. 6
- Digit 01 Reference record code ( § = hex. 7C )
- Digit 02 - 05 Participant code from the reference record from the transmission
- Digit 06 - 21 Reference number
- Digit 22 - 25 not used
- Digit 26 - 28 Processing key (here 503)
- Digit 29 - 31 Type of form GM
- Digit 32 - 41 Date/time of the delivery to the receiver (JJMMTT/HHMM)
- Digit 42 - 45 Addressed receiver (here ZAPP)
- Digit 46 - 55 Session number of the forwarder, under which the presentation notification has
been sent
- Digit 56 - 65 Session number of ZAPP, under which the presentation notification has been
recalled Continuation
50 60 70 80555 5
.... M
42 - 45 Adressierter Empfänger
46 - 55 Sitzungs-Nummer des Spediteurs unter der die Gestellungsmitteilung geschickt wurde
56 - 65 Sitzungs-Nummer d. Empfängers
unter der dieGestellungsmitteilung abgerufenwurde*
die Sitzungs-Nummer bleibt f re i (space/blank), fa lls dieGestellungsmitteilung aus der DAKOSY Dialog-Anwendung“KAIDOS” direkt beim Kaibetrieb ausgedruckt wurde
*
gabe an den Empfänger
C
66 - 77 B-Nummer des Zo lls
B 59 7 1 2 3 4 5 6 87
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 17 of 87
-Digit 66 - 77 ZAPP reference (here Z-number), under which the presentation notification has
been registered at ZAPP. This reference will also be transferred to the addressed
terminal and the addressed line agent/ ship owner.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 18 of 87
4. Service segments
4.1 Formatting rules for data transmission
Structure of interchange:
The interchange is limited by the segments UNB and UNZ.
UNB-Segment
UNH-Segment
Gestellungsmitteilung A
UNZ-Segment
UNH-Segment
Gestellungsmitteilung B
UNT-Segment
UNT-Segment
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 19 of 87
4.2 Explanations to the message structure
The following schedule only contains used segment.
Counter No Tag St MaxOcc Level Content
0000 1 UNA C 1 0 SERVICE STRING ADVICE
0000 2 UNB R 1 0 INTERCHANGE HEADER
0010 3 UNH R 1 0 MESSAGE HEADER
0020 4 BGM R 1 0 Beginning of message
0030 5 DTM R 1 1 Date of transmission
0040 6 RFF D 1 1 Z-number
0040 7 RFF D 2 1 EORI/Branch number
0040 8 RFF D 7 1 Shortage in quantity total position of a MRN
0050 SG1 R 1 1 NAD
0060 9 NAD R 1 1 Name and address ZAPP-participant (sender of data)
0100 10 FTX R 1 1 Level of MRN assignment
0100 11 FTX C 1 1 Additional actions during the cancellation of a Z-number
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 22 of 87
4.4 Implementation / Guideline Information
The segments are being represented by a universal diagram.
Example:
The first (main) column „EDIFACT“ with ist 3 sub-columns describes the structure of the used EDIFACT
message. The identifier/number of the respective composit or data element is indicated in the first column, the
corresponding meaning/name is indicated in the second column and the third column refers to the usage and
format.
The second (main) column „application“ with its 3 sub-columns describes how to use the respective composites
and data elements for the GPO.
The first column ST = Status means:
M (Mandatory) or R (Required)
The M will be adopted in this column, if a composit or data element is already mandatory (M =
Mandatory) in the actual EDIFACT message. In other cases the R = Required indicates a required
field from the B/L applications’ perspective.
D (Depending)
The data units have to be transmitted, in case of certain conditions which either are described in the
column “Usage/hints“ or derive from the use case. Segment group 32 (Indication of dangerous goods)
e.g. carries the status „D“, since the use depends on whether the position/item involves dangerous goods
or not.
C (Conditional/Optional)
It is up to the message sender to transmit the data units. In case of doubt an individual regulation
between sender and recipient has to be agreed.
X /N (not used)
Such identified composites or data elements are not used.
The second column indicates examples to respective data elements and the third column contains important
specifications for the usage, such as codes, port-specific conditions or format restrictions.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 23 of 87
5. Branching Diagram
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 24 of 87
Level 0
Level 1
UNA C 1
1
0000
UNB R 1
2
0000
UNH R 1
3
0010
BGM R 1
4
0020
DTM R 1
5
0030
RFF D 1
6
0040
SG1 R 1
0050
NAD
R 1
9
0060
FTX R 1
10
0100
1
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 25 of 87
Level 0
Level 1
Level 2
Level 3
1
SG3 R 1
0110
TDT
R 1
12
0120
LOC R 1
13
0130
DTM D 1
14
0140
GIS O 1
15
0150
SG6 R 1
0280
CNI
R 1
16
0290
SG7 R 1
0310
RFF
R 2
17
0320
LOC D 1
18
0350
GIS R 1
21
0360
3
2
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 26 of 87
Level 3
Level 4
Level 5
2
SG8 R 1
0390
TDT
R 1
22
0400
LOC R 1
23
0410
SG10 R 3
0470
NAD
R 1
24
0480
RFF R 1
25
0500
SG11 R 1
0510
CTA
R 1
26
0520
COM D 3
27
0530
SG13 R 999
0570
GID
R 1
31
0580
FTX R 99
32
0610
MEA D 2
38
0620
SGP D 1
39
0640
PCI D 1
40
0660
CST D 1
41
0670
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 27 of 87
Level 0
3
UNT M 1
42
0780
UNZ M 1
43
0000
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 28 of 87
6. Segment Structure
Counter No Tag Var St MaxOcc Level Name
0000 1 UNA 1 C 1 0 SERVICE STRING ADVICE
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNA
UNA1 Component data element separator
M an1 M an1 Separates data elements in a group
UNA2 Data element separator M an1 M an1 Separates data elements; segment identifier
UNA3 Decimal notation M an1 M an1 Decimal point; to come up to standard you can use both point and comma as decimal point. Decimal points must not be used compositely.
UNA4 Release indicator M an1 M an1 Enabling signal; restores the primary meaning of the character that follows the interrogation mark.
UNA5 Reserved for future use M an1 M an1 Blank/space; reserved for subsequent use
UNA6 Segment terminator M an1 M an1 Segment-final character (apostrophe), Hex-value 7 D
Remark:
Example: UNA:+.? '
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 29 of 87
Counter No Tag Var St MaxOcc Level Name
0000 2 UNB 1 R 1 0 INTERCHANGE HEADER
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNB
S001 SYNTAX IDENTIFIER M M
0001 Syntax identifier M a4 R a4 UNOA UN/ECE Zeichensatz A = Großbuchstaben
UNOB UN/ECE Zeichensatz B = Groß- u. Kleinbuchstaben
UNOA = UN/ECE character set A = capitals UNOB = UN/ECE character set B = caps and lower case letters
0002 Syntax version number M n1 M n1 1 Alte version 2 Neue version 1 = old version 2 = new version
S002 INTERCHANGE SENDER M R
0004 Sender identification M an..35 R an..35
0007 Partner identification code qualifier
C an..4 O an..4
0008 Address for reverse routing C an..14 N Address for reverse routing Not used
S003 INTERCHANGE RECIPIENT M R
0010 Recipient identification M an..35 R an..35
0007 Partner identification code qualifier
C an..4 O an..4
0014 Routing address C an..14 N Not used
S004 DATE/TIME OF PREPARATION
M R
0017 Date of preparation M n6 R n6 Format YYMMDD
0019 Time of preparation M n4 R n4 Format HHMM
0020 Interchange control reference M an..14 R an..14 Please choose a unique, ascending number as reference!
S005 RECIPIENT'S REFERENCE PASSWORD
C D
0022 Recipient's reference/password M an..14 R an..14 Reference or keyword of the receiver
0025 Recipient's reference/password qualifier
C an2 N Not used
0026 Application reference C an..14 N Not used
0029 Processing priority code C a1 N Not used
0031 Acknowledgement request C n1 N Not used
0032 Communications agreement ID C an..35 N Not used
0035 Test indicator C n1 D n1 1 Dieser Datenaustausch ist ein Test 1 = This data exchange is a test Element must not be sent with live data!
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 31 of 87
Counter No Tag Var St MaxOcc Level Name
0020 4 BGM 1 R 1 0 Beginning of message
Standard Implementation
Tag Name St Format St Format Usage / Remark
BGM
C002 Document/message name C R
1001 Document/message name, coded
C an..3 R an..3 335 Buchungsanforderung für Transportraum
335 = Booking request for transport capacity
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
1000 Document/message name C an..35 D an..35 Version of GM01 GM01V0 Version 03 3
1004 Document/message number C an..35 R an..35 UNIQUE
1225 Message function, coded C an..3 R an..3 9 Original 1 Aufhebung/Stornierung
Remark: 9 = original: the complete presentation notifiaction, resp. CUSCAR, that shall be deleted, must be sent again. Thereby the reference of the segment 40 RFF has to be known at DAKOSY . Cancellation not possible when the ZAPP reference is stopped or included in a SACO. 1 = cancellation: the reference, sent in segment 40 RFF, for the forwarder, specified in the NAD, must not be allocated to a ZAPP-reference when creating a file and may not be used again after cancellation. For the description of the conditions and consequences of a cancellation concerning to the AES-process, please refer to http://www.zapp-hamburg.de/pdf/grobkonzept_ZAPP-AES_v1.3.2_20060516.pdf
Example: BGM+335:::GM01V03++9'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 32 of 87
Counter No Tag Var St MaxOcc Level Name
0030 5 DTM 1 R 1 1 Date of transmission
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M R
2005 Date/time/period qualifier M an..3 R an..3 137 Dokumenten-/Nachrichtendatum/- zeit
137 = Document/ message date/ time
2380 Date/time/period C an..35 R an..35 Date and time
2379 Date/time/period format qualifier
C an..3 R an..3 203 JJJJMMTTHHMM
Remark:
Example: DTM+137:201404211513:203'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 33 of 87
Counter No Tag Var St MaxOcc Level Name
0040 6 RFF 1 D 1 1 Z-number
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M R
1153 Reference qualifier M an..3 R an..3 ABT Nummer der Zollanmeldung ABT = Number of customs declaration
1154 Reference number C an..35 R an12 Z number
1156 Line number C an..6 R an..4 RLS released NRL not released STOP gestoppt
Remark: A presentation via HDS may be provided as copy for the carrier/agent in the EDIFACT-message CUSCAR. The prior assigned Z-number is provided in the segment RFF. The Z or S number carries the status "not released", as long as the included MRN receives an export permission or an examination order --> "STOP". Z-number (via GM01 or HDS) of the presentor (only relevant for presentations forwarded to the shipowner and carrier/agent; NOT USED during the transmission of a presentation notification)
Example: RFF+ABT:Z06101469929:NRL'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 34 of 87
Counter No Tag Var St MaxOcc Level Name
0040 7 RFF 2 D 2 1 EORI/Branch number
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M M
1153 Reference qualifier M an..3 M an..3 ABP Identifikationsnummer des Zolls für einen Anmelder = TIN
ABP = customs identification number/ reference for a declarant = TIN
1154 Reference number C an..35 R an17 EORI (Economic Operators´ Registration and Identification number) (e.g. ‚DE1234567’)
1156 Line number C an..6 R n4 Branch (0000 - 9999)
4000 Reference version number C an..35 R a1 Identifier EORI 'E'
Remark: The presentor (e.g. forwarding agent) identifies oneself in the customs process with EORI and branch number. The EORI number ( (Economic Operators´ Registration and Identification number - number for the registration and identification of economic operators) is a 3- to 17-digit alphanumeric identification number. The branch number is 4-digit numeric. '0000' must be transmitted, if the participant did not apply for branch number(s). Mandatory in case of AES, AEM and DUX without MRN.
Example: RFF+ABP:DE1234567:0000:E'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 35 of 87
Counter No Tag Var St MaxOcc Level Name
0040 8 RFF 3 D 7 1 Shortage in quantity total position of a MRN
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M M
1153 Reference qualifier M an..3 M an..3 EP Nummer der Ausfuhrerklärung, MRN
EP = number of export explication, MRN
1154 Reference number C an..35 R an18 Number of export declaration, MRN; in case that a whole MRN won’t be exported, it must be cancelled by the exporter (goods haven’t arrived at port yet) or a GPO MRN cancellation (goods are already at the port) must be sent. MRN an18: n2; (year (00-99) a2; country ID ‚DE' n4; office number ATLAS n8; serial numbera1; technical procedure code ‚E' (a1) n1;check digit (n1) Advice: the digits 3 –18 may varying in all european MRN, see annex B. MRN
1156 Line number C an..6 C an..6 MRN position that won’t be exported completely
Remark: This segment is used to specify the position to the MRN completely omitted in case of a shortage. If the whole MRN won’t be exported, it must be cancelled by the exporter (cargo wasn’t delivered to a terminal yet) ot the “GPO shortage in quantity message” cancellation at exit (Cargo already delivered to a terminal) has to be sent. No shortage can be reported for a MRN of an exit summary declaration.
Example: RFF+EP:07DE736100197947E0:001'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 36 of 87
Counter No Tag Var St MaxOcc Level Name
0050 SG1 1 R 1 1 NAD
0060 9 NAD 1 R 1 1 Name and address ZAPP-participant (sender of data)
Standard Implementation
Tag Name St Format St Format Usage / Remark
NAD
3035 Party qualifier M an..3 R an..3 MS Dokumenten-/Nachrichtenaussteller bzw. -absender
MS = Document-/message drawer or sender
C082 Party identification details C R
3039 Party id. identification M an..35 R an..35 DAKOSY-participant -code
Remark:
Example: NAD+MS+DAKT'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 37 of 87
Counter No Tag Var St MaxOcc Level Name
0100 10 FTX 1 R 1 1 Level of MRN assignment
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 CUS Customs declaration information
4453 Text function, coded C an..3 N Not used
C107 Text reference C C
4441 Free text, coded M an..3 M an..3 LV Vorgangsebene LW Warenpositionsebene
Remark: This segment is used to specify how the export MRN is assigned to the presentation notification in case of the declaration cases AES and AEM.
Example: FTX+CUS++LV'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 38 of 87
Counter No Tag Var St MaxOcc Level Name
0100 11 FTX 2 C 1 1 Additional actions during the cancellation of a Z-number
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 CCI Customs clearance instructions
4453 Text function, coded C an..3 N Not used
C107 Text reference C C
4441 Free text, coded M an..3 M an..3 WL Weiterleitung an eine andere Ausgangszollstelle
AB Abbruch am Ausgang WL = Forwarding to another customs office of exit AB = Cancellation at exit
Remark: This segment provides the possibility to initiate the forwarding/cancellation at exit of a MRN simultaneously with the cancellation of the Z-number.
Example: FTX+CCI++WL'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
8051 Transport stage qualifier M an..3 R an..3 20 Hauptlauf 20 = Main carriage
8028 Conveyance reference number C an..17 C an..8 Voyage no agent
C220 Mode of transport C N
8067 Mode of transport, coded C an..3 N Not used
C228 Transport means C N
8179 Type of means of transport identification
C an..8 N Not used
C040 Carrier C D
3127 Carrier identification C an..17 D an7 DAKOSY-voyage no. - see A
8101 Transit direction, coded C an..3 N Not used
C401 Excess transportation information
C N
8457 Excess transportation reason, coded
M an..3 N Not used
C222 Transport identification C D
8213 Id. of means of transport identification
C an..9 D an..7 Call sign (vessel) - see A
1131 Code list qualifier C an..3 D an..3 103 Verzeichnis der Rufzeichen 103 = Index of call signs - see A
3055 Code list responsible agency, coded
C an..3 N Not used
8212 Id. of the means of transport C an..35 D an..35 Vessel name - see A
Remark: Following alternatives are available for the identification of the vessel: Alternative A: Specification of the DAKOSY-voyage no. (TDT, C040, DE 3127). (Further particulars aren’t required, because all information of the central DAKOSY-vessel schedule file will be added automatically) Alternative B: Specification of the call sign (TDT, C222, DE 8213), departure no. (segment 11 DTM, DE 2380) and agent’s codes (segment 38 NAD, qualifier BA, DE 3039). (An adjustment with the vessel departure file will be made and specifications will be added if applicable) Alternative C: Specification of the vessel name (TDT, C222, DE 8212), date of departure (segment 11 DTM, DE 2380) and agent’s codes (segment 38 NAD, Qualifier BA, DE 3039). (An adjustment with the DAKOSY vessel schedule database will be made and specifications will be added if available) Alternative D: Specification of the DAKOSY voyage no. "XXX9999" (TDT, C040, DE 3127), vessel name(C222, DE8212), estimated date of departure (Segment 11 DTM, DE 2380) and agent’s codes (Segment 38 NAD, Qualifier BA, DE3039). The voyage no. "XXX9999" shall only be used, if the exact spelling of the vessel name or the exact date of departure are unknown. (An adjustment with the DAKOSY vessel schedule database will be made and specifications will be added if available). Validations: Different details between vessel identification from GM01 and DAKOSY vessel schedule database will cause an error - except alternative D.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 40 of 87
Counter No Tag Var St MaxOcc Level Name
0110 SG3 1 R 1 1 TDT-LOC-DTM
0130 13 LOC 1 R 1 2 DAKOSY terminal code
Standard Implementation
Tag Name St Format St Format Usage / Remark
LOC
3227 Place/location qualifier M an..3 R an..3 9 Ladeort/Ladehafen
189 Bei UMF DAKOSY-Schuppen-Code. 9 = place/port of loading 189 = if UMF DAKOSY-terminal code for primary terminal. - see B
C517 Location identification C N
3225 Place/location identification C an..25 N Not used
C519 Related location one identification
C R
3223 Related place/location one identification
C an..25 R an..25 DAKOSY terminal code for primary terminal. - see A
Remark: A If the addressed terminal isn’t an EDI-Partner and doesn’t receive the cuscar message – a corresponding note will be given back to the message sender. (cf. EDI manual status messages) B The terminal code from primary terminal will be submitted with qualifier 189, when message type UMF (Umfuhrmeldung/ message of repositioning, moving container from one terminal to another). The Umfuhr - message will be delivered to the terminals and to the addressed carrier/ agent.
Example: LOC+9++PCH'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 41 of 87
Counter No Tag Var St MaxOcc Level Name
0110 SG3 1 R 1 1 TDT-LOC-DTM
0140 14 DTM 1 D 1 2 Vessel date of departure
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M R
2005 Date/time/period qualifier M an..3 R an..3 133 Abfahrtsdatum/-zeit, geschätzt 133 = estimated date/time of departure
2380 Date/time/period C an..35 R an8 Vessel departure ETS (segment 9 TDT, DE 8212) - see A
2379 Date/time/period format qualifier
C an..3 R an..3 102 JJJJMMTT
Remark: See annotation A to segment TDT 9
Example: DTM+133:20140427:102'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 42 of 87
Counter No Tag Var St MaxOcc Level Name
0150 15 GIS 1 O 1 1 Indicator outboard loading
Standard Implementation
Tag Name St Format St Format Usage / Remark
GIS
C529 Processing indicator M R
7365 Processing indicator, coded M an..3 R an..3 27 Außenbordverladung 27 = outboard loading
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
7187 Process type identification C an..17 R an1 J Außenbordverladung N Keine Außenbordverladung J = outboard loading N = no outboard loading
Remark: This segment indicates whether this concerns with an "outboard loading", i.e. goods declared by this presentation notification, will be directly loaded from barge to ocean vessel; there’s no land sided Gate- In. Relevance for the ATLAS AES process see www.ZAPP-HAMBURG.DE/dokumente/AES/process description at outboard loading.
Example: GIS+27:::J'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 43 of 87
Counter No Tag Var St MaxOcc Level Name
0280 SG6 1 R 1 1 CNI-SG7
0290 16 CNI 1 R 1 1 Consignment information
Standard Implementation
Tag Name St Format St Format Usage / Remark
CNI
1490 Consolidation item number C n..4 R n..4 Consecutive no. 1
Remark:
Example: CNI+1'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 44 of 87
Counter No Tag Var St MaxOcc Level Name
0310 SG7 1 R 1 2 RFF-LOC-GIS-SG8-SG10-SG13
0320 17 RFF 1 R 2 2 MRN of export declaration/ MRN of exit summary declaration / ATB-number
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M R
1153 Reference qualifier M an..3 R an..3 ED Ausfuhranmeldung, A-SumA: MRN - siehe A
ZZZ Unterlassungswert -siehe B AEI Registration number of previous
Customs declaration, ATB- Nummer - siehe C
ED = export declaration: MRN - see A ZZZ = Mutually defined - see B AEI = ATB-number (with DUX only) - see C
1154 Reference number C an..35 D an18 Number of export declaration MRN an18: n2; (year (00-99) a2; country ID ‚DE' n4; office number ATLAS n8; serial number a1; technical procedure code ‚E', 'X' (a1) n1; check digit (n1)
1156 Line number C an..6 N Not used
4000 Reference version number C an..35 R an..35 Date/time of MRN release To be specified in format YYYYMMDDHHMMSS Mandatory field in case of declaration type DUX with MRN - see D
Remark: The transmission of this segment is mandatory due to the message structure CUSCAR! A Only one MRN can be declared with the presentation notfification message (CUSCAR), i.e. the RFF+ED may only be transmitted once. With declaration type DUX with MRN only the MRN of the Hamburg customs office of exit (4851) can be specified (EXS-MRN referring to a summary exit declaration). B When transmitting a presentation with presentation type „SAC“ = SACO presentation the specification of the MRN is no longer required. The segment with ZZZ as qualifier will be expected. C The ATB no. to the summary declaration can be specified in case of declaration type DUX. Therefore it is required to repeat the RFF segment twice, unlike to the EDIFACT standard. Is it not allowed to transmit two MRNs or two ATB numbers. D The time of release of the prior-made Exit Summary Declaration has to be stated. The release is communicated with the message „E_EXS_STA“ from ATLAS. The time of release from the perspective of ZAPP is the time of receipt of the message mentioned above. Specifications like „00:00“, the actual time or date and the time when receiving the MRN are not allowed.
Example: RFF+ED:15DE999912345678E7::20170113115700' Declaration type AES RFF+ED:17DE999912345678E7' ---------------------------------------------------------------------------------- Declaration type DUX with MRN RFF+ED:17DE485112345678X3::20170113115700'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 45 of 87
0310 SG7 1 R 1 2 RFF-LOC-GIS-SG8-SG10-SG13
0320 17 RFF 1 R 2 2 MRN of export declaration/ MRN of exit summary declaration / ATB-number
---------------------------------------------------------------------------------- Declaration type DUX with MRN and ATB-Number RFF+ED:17DE485112345678X3::20170113115700' RFF+AEI:ATB152234310420174851' ---------------------------------------------------------------------------------- Declaration type DUX without MRN RFF+ZZZ'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 46 of 87
Counter No Tag Var St MaxOcc Level Name
0310 SG7 1 R 1 2 RFF-LOC-GIS-SG8-SG10-SG13
0350 18 LOC 1 D 1 3 Country of origin
Standard Implementation
Tag Name St Format St Format Usage / Remark
LOC
3227 Place/location qualifier M an..3 M an..3 27 Country of origin Code 27 - Country of origin has to be specified for declaration type DUX without MRN.
C517 Location identification C C
3225 Place/location identification C an..25 C an..25 Country code according to ISO 3166
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 C an..3 5 ISO (International Organization for Standardization)
Blank Code according to external trade statistic
5 = mandatory field if the ISO code is specified in DE3225
Remark: The specification of the country of origin is required for declaration type DUX without MRN.
Example: LOC+27+CN::5'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 47 of 87
Counter No Tag Var St MaxOcc Level Name
0310 SG7 1 R 1 2 RFF-LOC-GIS-SG8-SG10-SG13
0350 19 LOC 2 D 1 3 Place/location identification
Standard Implementation
Tag Name St Format St Format Usage / Remark
LOC
3227 Place/location qualifier M an..3 M an..3 28 Country of destination of goods Code 27 - Country of origin has to be specified for declaration type DUX without MRN.
C517 Location identification C C
3225 Place/location identification C an..25 C an..25 Country code according to ISO 3166
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 C an..3 5 ISO (International Organization for Standardization)
Blank Code according to external trade statistic
5 = mandatory field if the ISO code is specified in DE3225
3224 Place/location C an..70 C an..70
Remark: Country of destination is required in case of declaration type DUX for statistical purposes and must not be sent in case of the declaration cases AES and AEM. The specification of country of destination is required in case of declaration type DUX without MRN.
Example: LOC+28+CN:::X'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 48 of 87
Counter No Tag Var St MaxOcc Level Name
0310 SG7 1 R 1 2 RFF-LOC-GIS-SG8-SG10-SG13
0350 20 LOC 3 D 1 3 New customs office of exit
Standard Implementation
Tag Name St Format St Format Usage / Remark
LOC
3227 Place/location qualifier M an..3 M an..3 22 Customs office of clearance
C517 Location identification C C
3225 Place/location identification C an..25 C an..25
Remark: The customs office of exit has to be specified in this segment, if the forwarding of an MRN to another German customs office of exit is initiated simultaneously with the cancellation of a Z-number.
Example: LOC+22+DE002452'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 49 of 87
Counter No Tag Var St MaxOcc Level Name
0310 SG7 1 R 1 2 RFF-LOC-GIS-SG8-SG10-SG13
0360 21 GIS 1 R 1 3 General indicator
Standard Implementation
Tag Name St Format St Format Usage / Remark
GIS
C529 Processing indicator M M
7365 Processing indicator, coded M an..3 M an..3 22 Export
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
7187 Process type identification C an..17 C an..5 AES Export declaration in the AES procedure
AEM Export declaration in the AES procedure for market regulation commodities
AUS Export / dispatch or summary export declaration in paper form, created in course of the emergency concept
The declaration type DUX must be used for consignments for which an exit summary declaration has been delivered. Two situation are distinguished:
DUX with MRN: The forwarding agent generates the exit summary declaration and also supplies the MRN via HDS or presenation notification GM01.
DUX without MRN: ZAPP generates the exit summary declaration. Status messages from ATLAS are immediately received in ZAPP and directly forwarded to the participants.
SAC Consolidated container for export declaration in the AES procedure
Remark: Declaration type
Example: GIS+22:::AES'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 50 of 87
Counter No Tag Var St MaxOcc Level Name
0390 SG8 1 R 1 3 TDT-LOC
0400 22 TDT 1 R 1 3 Voyage no. (agent), call sign (vessel), name of the vessel
Standard Implementation
Tag Name St Format St Format Usage / Remark
TDT
8051 Transport stage qualifier M an..3 R an..3 20 Hauptlauf 20 = Main carriage
8028 Conveyance reference number C an..17 N Not used
C220 Mode of transport C D
8067 Mode of transport, coded C an..3 R an..3 1 Sea
Remark: The transmission of this segment is mandatory due to the message structure CUSCAR!
Example: TDT+20++1'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 51 of 87
Counter No Tag Var St MaxOcc Level Name
0390 SG8 1 R 1 3 TDT-LOC
0410 23 LOC 1 R 1 4 Port of discharge code and port of discharge
Standard Implementation
Tag Name St Format St Format Usage / Remark
LOC
3227 Place/location qualifier M an..3 R an..3 11 Entladeort/Löschhafen 11 = place of loading/port of discharge
C517 Location identification C R
3225 Place/location identification C an..25 R an5 Port of discharge according to UN-LOCODE
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 O an..3 6 UN/ECE (United Nations - Economic Commission for Europe)
3224 Place/location C an..70 O an..19 Name of port of discharge
Remark:
Example: LOC+11+MTMLA::6:MALTA'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 52 of 87
Counter No Tag Var St MaxOcc Level Name
0470 SG10 1 R 3 3 NAD-RFF-SG11
0480 24 NAD 1 R 1 3 Carrier/ line agent
Standard Implementation
Tag Name St Format St Format Usage / Remark
NAD
3035 Party qualifier M an..3 R an..3 BA Buchungsagent CA Frachtführer BA = booking agent CA = carrier - see A
C082 Party identification details C R
3039 Party id. identification M an..35 D an..4 The DAKOSY-code must be specified for "BA" and "CA".
1131 Code list qualifier C an..3 O an..3 ZZZ Beiderseitig vereinbart ZZZ = Mutually agreed
Remark: A The agents/agents, resp. shipowners corresponding DAKOSY-participant-code will be indicated in DE 3039. It isn’t necessary to indicate an address in such cases. Only DAKOSY-participant-codes of agents/agents or shipowners will be transferred in the DE3039 during the transmission of the CUSCAR to agents/agents or shipowners. The composit C058 will not be passed on in this case.
Example: NAD+BA+SAC:ZZZ'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 53 of 87
Counter No Tag Var St MaxOcc Level Name
0470 SG10 1 R 3 3 NAD-RFF-SG11
0500 25 RFF 1 R 1 4 Reference of the presentor/forwarder
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M R
1153 Reference qualifier M an..3 R an..3 CR Referenz des Gestellenden / Spediteurs
BN Buchungsnummer wenn bei SG10, NAD, DE 3035 Qualifier BA angegeben
CR = reference of the presentor/forwarder BN = booking number if the qualifier BA is specified in SG10, NAD,DE 3035
1154 Reference number C an..35 R an..16 Reference of the presentor/forwarder Booking number Specifications of the booking no. required in case of LCL consignments.
Remark:
Example: RFF+CR:MLA401062'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 54 of 87
Counter No Tag Var St MaxOcc Level Name
0510 SG11 1 R 1 4 CTA-COM
0520 26 CTA 1 R 1 4 Official in charge
Standard Implementation
Tag Name St Format St Format Usage / Remark
CTA
3139 Contact function, coded C an..3 R an..3 IC Informationskontakt IC = Information contact
C056 Department or employee details
C R
3413 Department or employee identification
C an..17 N Not used
3412 Department or employee C an..35 R an..35 Official in charge
Remark:
Example: CTA+IC+:ROLF WOLF'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 55 of 87
Counter No Tag Var St MaxOcc Level Name
0510 SG11 1 R 1 4 CTA-COM
0530 27 COM 1 D 3 5 Communication contact
Standard Implementation
Tag Name St Format St Format Usage / Remark
COM
C076 Communication contact M R
3148 Communication number M an..512 R an..512 Phone mandatory an..15 E-mail address an..56 Telefax mandatory an..35
3155 Communication channel qualifier
M an..3 R an..3 TE Telefon EM E-Mail-Adresse FX Telefax TE = phone EM = e-mail address FX = telefax
Remark:
Example: COM+0421/52016-23:TE'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 56 of 87
Counter No Tag Var St MaxOcc Level Name
0470 SG10 2 D 1 3 NAD
0480 28 NAD 1 D 1 3 Declarant
Standard Implementation
Tag Name St Format St Format Usage / Remark
NAD
3035 Party qualifier M an..3 M an..3 DT Declarant Code DT has to be specified for declaration type DUX without MRN.
C082 Party identification details C C
3039 Party id. identification M an..35 R an..4 DAKOSY participant code
1131 Code list qualifier C an..3 C an..3 ZZZ Beiderseitig vereinbart ZZZ = Mutually agreed
C058 Name and address C R
3124 Name and address line M an..35 R an..35 Declarant's address
3124 Name and address line C an..35 C an..35 Declarant's address
3124 Name and address line C an..35 D an..35 Declarant's address. The specification of the declarant's location is required for declaration type DUX without MRN. Contains the place of declaration in plain text.
3124 Name and address line C an..35 C an..35 Declarant's address
3124 Name and address line C an..35 C an..35 Declarant's address
Remark: The specification of the declarant's location is required for declaration type DUX without MRN.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 57 of 87
Counter No Tag Var St MaxOcc Level Name
0470 SG10 3 D 1 3 NAD
0480 29 NAD 1 D 1 3 Consignor
Standard Implementation
Tag Name St Format St Format Usage / Remark
NAD
3035 Party qualifier M an..3 M an..3 CZ Consignor Code CZ has to be specified for declaration type DUX without MRN.
C082 Party identification details C N
3039 Party id. identification M an..35 N Not used
C058 Name and address C R
3124 Name and address line M an..35 M an..35 Consignor's address. For DUX without MRN = also EORI is possible.
3124 Name and address line C an..35 D an..35 Consignor's address. For DUX without MRN = Street
3124 Name and address line C an..35 D an..35 Consignor's address. For DUX without MRN = Location
3124 Name and address line C an..35 D an..35 Consignor's address. For DUX without MRN = Postcode
3124 Name and address line C an..35 D an..35 Consignor's address. For DUX without MRN = ISO country code
Remark: In case of declaration type DUX without MRN the address of the sender/consignor must be specified, if it differs from the EORI of the forwarding agent.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 59 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0580 31 GID 1 R 1 3 Number and type of packages, code and type of packages (long)
Standard Implementation
Tag Name St Format St Format Usage / Remark
GID
1496 Goods item number C n..5 R n..5 1, 2, 3, etc.
C213 Number and type of packages C R
7224 Number of packages C n..8 R n6 Number of packages -see A
7065 Type of packages identification C an..17 R an2 KL Kolli KL = Kolli (packages) Type of packages; DAKOSY-code -see A
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
7064 Type of packages C an..35 D an..7 Type of packages; mandatory field, if no coding is indicated
Remark: A In case of the declaration types "SAC" = SACO –presentation and "UMF" = message of repositioning (SG07 GIS, DE 7187) the element DE 7224 requires the specification of "1" (number of packages) and data element DE 7065 the specification of only one container package code. The container package codes are published in the internet.
Example: GID+1+1:KL:::KOLLI'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 60 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0610 32 FTX 1 R 99 4 Goods description
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 AAA Güter-/Warenbeschreibung (Warenbeschreibung)
- see A
4453 Text function, coded C an..3 N Not used
C107 Text reference C N
4441 Free text, coded M an..3 N Not used
C108 Text literal C R
4440 Free text M an..70 R an..44 Goods description
4440 Free text C an..70 O an..44 Goods description
4440 Free text C an..70 O an..44 Goods description
4440 Free text C an..70 O an..44 Goods description
4440 Free text C an..70 O an..44 Goods description
Remark: Not applicable if declaration type "SAC" = SACO. A If declaration type = DUX without MRN (SG6/7 GIS DE7187), the specification of the goods description (DE4451 = AAA) or the customs code identification (segment CST) is required.
Example: FTX+AAA+++FURNITURE:FURTHER DESCRIPTION, LINE 2:FURTHER DESCRIPTION, LINE 3:FURTHER DESCRIPTIO N, LINE 4:FURTHER DESCRIPTION, LINE 5'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 61 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0610 33 FTX 2 R 99 4 Position numbers/ package-ID's to the number of the export declaration (MRN)
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 MKS Positionsnummer / Pack-ID/ Vollständigkeitskennzeichen/ Mindermengenkennzeichen zur MRN
MKS = position number / pack.-ID/indicator shortage in quantity/to the MRN
4453 Text function, coded C an..3 N Not used
C107 Text reference C N
4441 Free text, coded M an..3 N Not used
C108 Text literal C R
4440 Free text M an..70 R n3 Position number of export declaration; value other than 000. If an MRN will be completely declared with this message (indic. of completeness= J), the value 000 may not be sent as of 1.04.2013 anymore, but generally the actual position of the export declaration. Also the qualifier LV can be set in RFF+ED in such cases. The declaration in AES takes place on operation level.
4440 Free text C an..70 D n2 Package-ID to the position number (MKS) has to be 00, if the assignment in RFF+ED has been set at operation or goods item level (LV or LW); in case of "00" no further package-ID data to the position is expected, the message will be rejected otherweise. If the assignment has been speicified on package level, this element must contain a value other than "00". Package-ID
4440 Free text C an..70 R an1 Indic. of completeness J/N
4440 Free text C an..70 O an..70 Indic. shortage in quantity J/N
4440 Free text C an..70 C an..70 If all or some of the goods loaded onto the vehicle are registered on an own (!) goods item of the same MRN, the corresponding goods item must be identified with B.
B Beiladung im Fahrzeug B = Additional cargo in the vehicle Following rules apply: * The FTX+AKG must not be sent for the same GID group. The GID describing the vehicle cannot be identified as additional cargo. * A goods item with vehicle data (FTX+AKG) must be available in the presentation notification.
Remark: Not applicable at this declaration type ‚SAC“ = SACO The indicator of completeness must always be set on „J“, splitting of a MRN in 2 or more Z-numbers is only available with the HDS.The indicator of shortage in quantity = J must always be indicated if the quantity (weight), which is indicated to the position, has been decreased in comparison to the quantity indicated in the first stage of customs declaration. The shortage in quantity will be reported to AES by means of the variation in net weight. The actual export weight of the position must be notified in positions declared with shortage in quantity = J. A position must be separately specified in the segment RFF qualifier EP at the header level, if the position will be cancelled completely. If the whole MRN will not be exported, it must be cancelled by the exporter (goods have not arrived at port yet) or the GPO shortage in quantity message termination of export (goods are already at the port) has to be sent.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 62 of 87
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0610 33 FTX 2 R 99 4 Position numbers/ package-ID's to the number of the export declaration (MRN)
In case of declaration type DUX a shortage cannot be specified. The MRN positions in FTX+MKS have to be indicated in ascending order. Example: GID+1+1:UV:::' FTX+MKS+++001:00:J:' GID+2+1:UV:::' FTX+MKS+++001:00:J:' GID+3+1:UV:::' FTX+MKS+++002:00:J:' GID+4+1:UV:::' FTX+MKS+++002:00:J:' GID+5+1:UV:::' FTX+MKS+++003:00:J:' ... Only the position number of the exportation declaration will be passed on in the first data element 4440 during the transmission of the CUSCAR to the shipowner/agent/line. The goods description may add up to 4x44 positions. Special explanatory notes may add up to max. 5 x 45positions.
Example: FTX+MKS+++001:00:J:N:B'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 63 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0610 34 FTX 3 C 99 4 special explanatory note
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 AAZ (Additional export information bes. Vermerke
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 64 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0610 35 FTX 4 D 99 4 SACO - Z-number/B-numbers of single consignments
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 DCL Declaration DCL= declaration SACO with indicator of completeness
4453 Text function, coded C an..3 N Not used
C107 Text reference C N
4441 Free text, coded M an..3 N Not used
C108 Text literal C R
4440 Free text M an..70 R an13 ZAPP reference (Z-number, B-number or S-Number) + indic. of completeness (J/N)
4440 Free text C an..70 O an13 ZAPP reference (Z-number, B-number or S-Number) + indic. of completeness (J/N)
4440 Free text C an..70 O an13 ZAPP reference (Z-number, B-number or S-Number) + indic. of completeness (J/N)
4440 Free text C an..70 O an13 ZAPP reference (Z-number, B-number or S-Number) + indic. of completeness (J/N)
4440 Free text C an..70 O an13 ZAPP reference (Z-number, B-number or S-Number) + indic. of completeness (J/N)
Remark: Required segment in case of a declaration of a consolidated container (declaration type SAC) The recipient (terminal, line agent) receives the data in the segment FTX+OSI.
4451 Text subject qualifier M an..3 M an..3 OSI (Otherwise specified) = SACO Anmeldung -siehe B
OSI = (otherwise specified) = SACO not applicable as of 01.03.2008
4453 Text function, coded C an..3 N Not used
C107 Text reference C N
4441 Free text, coded M an..3 N Not used
C108 Text literal C R
4440 Free text M an..70 R an12 ZAPP reference (Z-number, B-number or S-Number)
4440 Free text C an..70 O an12 ZAPP reference (Z-number, B-number or S-Number)
4440 Free text C an..70 O an12 ZAPP reference (Z-number, B-number or S-Number)
4440 Free text C an..70 O an12 ZAPP reference (Z-number, B-number or S-Number)
Remark: The declaration of a consolidated container must be done via FTX+DCL. For the receiver(terminal, line agent) applies: The SACO-ZAPP-references will be transferred in the FTX+OSI!
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 66 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0610 37 FTX 6 D 99 4 Chassis number
Standard Implementation
Tag Name St Format St Format Usage / Remark
FTX
4451 Text subject qualifier M an..3 M an..3 AKG Chassis Nr. AKG = chassis number
4453 Text function, coded C an..3 N Not used
C107 Text reference C N
4441 Free text, coded M an..3 N Not used
C108 Text literal C R
4440 Free text M an..70 R an..17 Chassis number
4440 Free text C an..70 D an1 Indicator equipment: Z
Remark: One chassis number may be sent per GID. The characters O and I are not permitted in the chassis number. O has to be replaced by 0 = zero instead! l has to be replaced by 1. Additional cargo: The additional cargo indicator "B" cannot be sent within segment FTX+AKG, but in segment FTX+MKS (cf. page 56). Equipment: The segment FTX+AKG for vehicle equipment must include the chassis number and equipment 'Z'.
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 67 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0620 38 MEA 1 D 2 4 Net weight/gross weight
Standard Implementation
Tag Name St Format St Format Usage / Remark
MEA
6311 Measurement application qualifier
M an..3 R an..3 AAE values
C502 Measurement details C R
6313 Measurement dimension, coded
C an..3 R an..3 G Gross weight AAL Net weight AAW Coubage - see A;C
C174 Value/range C R
6411 Measure unit qualifier M an..3 M an..3 KGM Kilogramm
6314 Measurement value C n..18 R n..11 Value -see B
Remark: A At least the gross weight must be indicated. - AAL = Net weight (without packing) - G = Gross weight (net weight + packing)
Only the gross weight, not the net weight, is forwarded to the recipient (quay operator).
B The weight (gross- or net weight) will be transferred in data element 6314. Thereby attention should be paid to the fact that the weight may have max. 8 pre-decimal places and 3 decimal places. When indicating decimal places, please indicate a comma (e.g. 5,645). The message will be rejected, in case of a transmission with more than 8 pre-decimal places. The indication will be cut off from the fourth digit, when indicating more than 3 decimal places. Integral values can be transmitted without indicating a comma (e.g. 25000 or 25000,000). The indication of the grossweight is mandatory in case of declaration type "SAC"= SACO-presentation. An indication of the weight won’t be expected for the transmission of additional packages to one position. C The indication of the net weight is mandatory in case of a notification of shortage in quantity. The actual weight (both gross weight and net weight, that are being up to be exported) of the position must be indicated. The indication of 0 is not permitted. The indication of the whole position takes place in segment RFF qualifier EP at header level; if the whole MRN won’t be exported, it must be cancelled by the exporter (goods aren’t arrived at port yet) or the GPO shortage in quantity message termination of export (goods are already at the port) has to be sent.
Example: MEA+AAE+G+KGM:205,000'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 68 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0640 39 SGP 1 D 1 4 Equipment allocation of goods
Standard Implementation
Tag Name St Format St Format Usage / Remark
SGP
C237 Equipment identification M R
8260 Equipment identification number
C an..17 R an..17 Container number in terms of PPPPNNNNNNZ P = prefix N = number Z = check digit - see A
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 R an..3 5 ISO (International Organization for Standardization)
ZZZ Beiderseitig vereinbart (shippers owned)
Code = 5 --> ISO Code = ZZZ --> shippers owned
Remark: Mandatory in case of containerized goods, declaration type: "SAC"= SACO-presentation. A The prefix will always be counter-checked with the BIC-code-table, if a container number is indicated. This table contains every officially assigned container prefix. The assignment is made by the organisation "Bureau International des Containers" (BIC). A validity check takes place in any case of a prefix occurring in this table, even if the container has been identified as "shippers owned". That’s why containers without official prefix according to BIC-code must be identified as "shippers owned". A detailed index of the validity check can be found under annex A. An indication of the weight will not be expected for the transmission of additional packages to one position.
Example: SGP+HLCU1234566::5'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 69 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0660 40 PCI 1 D 1 4 Package identification
Standard Implementation
Tag Name St Format St Format Usage / Remark
PCI
4233 Marking instructions, coded C an..3 R an..3 24 Shipper assigned (marks)
C210 Marks & labels C R
7102 Shipping marks M an..35 M an..20 Character and number (marks) - see A
Remark: Marks may be sent for the transmission of additional packages to one position. A If declaration type = DUX without MRN (SG6/7 GIS DE7187) the specification of the shipping mark is required.
Example: PCI+24+MARKS AND NUMBERS'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 70 of 87
Counter No Tag Var St MaxOcc Level Name
0570 SG13 1 R 999 3 GID-FTX-MEA-SGP-PCI-CST
0670 41 CST 1 D 1 4 Customs status of goods
Standard Implementation
Tag Name St Format St Format Usage / Remark
CST
1496 Goods item number C n..5 N Not used
C246 Customs identity codes C R
7361 Customs code identification M an..18 M an..18 8-digit customs code identification - see A
Remark: A If declaration type = DUX without MRN (SG6/7 GIS DE7187) the specification of the customs code identification (7361) or the specification of the goods description (SG13/FTX(1)) is required.
Example: CST++86053245'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 71 of 87
Counter No Tag Var St MaxOcc Level Name
0780 42 UNT 1 M 1 0 MESSAGE TRAILER
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNT
0074 Number of segments in a message
M n..6 M n..6 Number of segments in a message (including the UNH- and UNT- segment)
0062 Message reference number M an..14 M an..14 Message reference number of the UNH/0062. Comparison of the number when receiving the message with the UNH record.
Remark:
Example: UNT+27+04042115130001'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 72 of 87
Counter No Tag Var St MaxOcc Level Name
0000 43 UNZ 1 M 1 0 INTERCHANGE TRAILER
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNZ
0036 Interchange control count M n..6 R n..6 Number of (sent) segments in the interchange
0020 Interchange control reference M an..14 M an..14 Message reference number of the UNB/0020
Remark:
Example: UNZ+1+0404211513'
DAKOSY Datenkommunikationssystem AG Presentation notification GM01 AES
User manual Page: 73 of 87
7. List of data fields and corresponding validations