Hirose Electric Co., LTD • www.hirose.com • US-CX90M16P-DS-18-270-1.0 / Issued October 2018 DATA SHEET from HIROSE ELECTRIC ◗ ◗ ◗ ◗ Waterproof USB Type-C (Mid-mount) CX90MWD2 Series Components Features: ◗ Waterproof USB Type-C Receptacle (IPX8 compliant) ◗ Robust design with deep drawing shell ◗ Reduced product volume by 22% compared to competition ◗ Improved peeling strength using 6 THR* mounting posts ◗ USB Type-C compliant interface connector ◗ Reversible plug orientation ensures easy insertion * Through-Hole-Reflow A L L R IG H T S R E S E R V E D A LL R I G H T S R E S E R VE D Bottom shell Potting Inner shell Top shell Insulator Mid-plate Contact Improved Peeling Strength Waterproof Design Improved peeling strength using 6 THR* mounting posts ■ Mounted on the PCB Mounting *THR is also known as PIP(Pin-in-Paste) process, a method to solder components with through hole leads using surface mount (SMT) assembly process steps, enhances manufacturing efficiency. : Ground pins CX90MWD2 Mid-plate Shell IPX8 WATERPROOF STANDARD Water-penetration route Water protected location Case body Case body 2. Potting 1. Gasket *1 1. Gasket *1 PCB *1 Customer supplied gasket required for waterproof performance To prevent water penetration into the case body To prevent water penetration into the connector interior IPX8 *2 waterproof design *2 IPX8 waterproof (unmated) test Immersed in 1.5meter of water for 30 minutes
2
Embed
from HIROSE ELECTRIC CX90MWD2 Series · 2019. 1. 21. · Hirose Electric Co., LTD • • US-CX90M16P-DS-18-270-1.0 / Issued October 2018 DATA SHEET from HIROSE ELECTRIC Waterproof
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Hirose Electric Co., LTD • www.hirose.com • US-CX90M16P-DS-18-270-1.0 / Issued October 2018
DATA SHEETfrom HIROSE ELECTRIC
◗◗◗◗
Waterproof USB Type-C (Mid-mount)
CX90MWD2 Series
Components
Features:◗ Waterproof USB Type-C Receptacle(IPX8 compliant)◗ Robust design with deep drawing shell◗ Reduced product volume by 22% compared to competition◗ Improved peeling strength using 6 THR* mounting posts◗ USB Type-C compliant interface connector◗ Reversible plug orientation ensures easy insertion* Through-Hole-Reflow
ALL RIGHTS RESERVEDALL R
IGHTS RESERVED
Bottom shell
Potting
Inner shell
Top shell
Insulator
Mid-plate
Contact
Improved Peeling Strength
Waterproof Design
Improved peeling strength using 6 THR* mounting posts
■ Mounted on the PCB
Mounting
*THR is also known as PIP(Pin-in-Paste) process, a method to solder components with through holeleads using surface mount (SMT) assembly process steps, enhances manufacturing efficiency.
:
Ground pins
CX90MWD2Mid-plate
Shell
IPX8WATERPROOF
STANDARD
Water-penetration route Water protected location
Case body
Case body
2. Potting
1.Gasket*1
1.Gasket*1
PCB
*1 Customer supplied gasket required for waterproof performance
To prevent water penetration into the case body
To prevent water penetration into the connector interior
IPX8*2 waterproof design
*2 IPX8 waterproof (unmated) test Immersed in 1.5meter of water for 30 minutes
C O N N E C T I N G T H E F U T U R E◗◗◗◗
For additional information please go to https://www.hirose.com/product/en/products/CX/
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
STAY CONNECTED
Hirose Electric Co., LTD • www.hirose.com • US-CX90M16P-DS-18-270-1.0 / Issued October 2018
Contact Copper Alloy Contact : Au plating over Pd-Ni plating over Ni plating Lead : Au plating over Ni plating
Inner shell Stainless Steel Degreasing
Top shell Stainless Steel Ni plating
Bottom shell Stainless Steel Ni plating
Potting Silicone Black
* NOTE : This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine.
No. of Contacts 24 pos.
Rated Current 1.25A DC Max. for each power pin (i.e. A1, A4, A9, A12, B1, B4, B5, B9, B12)0.25A DC for the other pins