Top Banner
WATERPROOF MEMBRANE WATERPROOF MEMBRANE WP INDUSTRY LEADING WATERPROOF MEMBRANE SYSTEM Triton WP™ is a waterproof membrane that leads the way in watertight applications. WP™ protects your structure and ensures superior adhesion of tiles. WP™ provides a quick and easy watertight solution for areas with high levels of water and moisture. 1-833-909-0839 TRITONWATERTIGHT.com ©2020 MiTek Industries, Inc. All Rights Reserved. #2593-WP MANUFACTURED TO PROVIDE A CONSISTENT LAYER OF PROTECTION THROUGHOUT YOUR WET AREA VAPOR BARRIER AND WATERPROOF LOAD BEARING MEMBRANE MEETS TCNA REQUIREMENTS FOR STEAM SHOWERS SIGNATURE FLEECE WEAVE FOR OPTIMAL ADHESION AVAILABLE AS SHEET, SEAM TAPE, CORNERS, AND PIPE/VALVE COVERS TRITON WP™ STANDARDS ICC-ES AC115 (R2013) ES Report PMG-1436 ANSI 118.10-2008 American National Standard Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin-set Ceramic Tile and Dimension Stone Installation ASTM E96 Water Vapor Transmission of Materials AS 3740-2010 Waterproofing of Domestic Wet Areas TRITON WP™ ROLL SIZES 3.28' x 32.81' (108ft²) 3.28' x 98.43' (323ft²) 4.2' x 25' (105ft²) 4.2' x 75' (315ft²) 5" x 75' (375ft²) WP 10M WP 30M WP 425 WP 475 WP 5-75 PRODUCT
2

WATERPROOF MEMBRANE WATERPROOF MEMBRANE

Oct 16, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: WATERPROOF MEMBRANE WATERPROOF MEMBRANE

WATERPROOF MEMBRANE

W A T E R P R O O F M E M B R A N E

WP

INDUSTRY LEADING WATERPROOF MEMBRANE SYSTEM

Triton WP™ is a waterproof membrane that

leads the way in watertight applications. WP™

protects your structure and ensures superior

adhesion of tiles. WP™ provides a quick and

easy watertight solution for areas with high

levels of water and moisture.

1-833-909-0839TRITONWATERTIGHT.com

©2020 MiTek Industries, Inc. All Rights Reserved. #2593-WP

→ MANUFACTURED TO PROVIDE A CONSISTENT LAYER OF PROTECTION THROUGHOUT YOUR WET AREA

VAPOR BARRIER AND WATERPROOF LOAD BEARING MEMBRANE

MEETS TCNA REQUIREMENTS FOR STEAM SHOWERS

SIGNATURE FLEECE WEAVE FOR OPTIMAL ADHESION

AVAILABLE AS SHEET, SEAM TAPE, CORNERS, AND PIPE/VALVE COVERS

TRITON WP™ STANDARDSICC-ES AC115 (R2013) ES Report PMG-1436

ANSI 118.10-2008 American National Standard Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin-set Ceramic Tile and Dimension Stone Installation

ASTM E96 Water Vapor Transmission of Materials

AS 3740-2010 Waterproofing of Domestic Wet Areas

TRITON WP™ ROLL SIZES 3.28' x 32.81' (108ft²) 3.28' x 98.43' (323ft²) 4.2' x 25' (105ft²)4.2' x 75' (315ft²) 5" x 75' (375ft²)

WP 10MWP 30MWP 425WP 475WP 5-75

PRODUCT

Page 2: WATERPROOF MEMBRANE WATERPROOF MEMBRANE

WATERPROOF MEMBRANE W A T E R P R O O F M E M B R A N E

WP

1-833-909-0839TRITONWATERTIGHT.com

©2020 MiTek Industries, Inc. All Rights Reserved. #2593-WP

1 2 3 4

6

8

9

11

5

7b

7c10

7a

DAMPSPONGE

1/8” (3mm) SQUARENOTCH MORTAR BED

COLLARS

2” OVERLAP

CORNERS

The substrate must be clean, even, and load bearing. Use a damp sponge to clean substrate.

Drywall substrates need a coat of primer.

Mark wall with WP™ Membrane perimeter lines

Precut WP™ Membrane to size including hole cuts for plumbing

Use recommended mortar for substrate with maximum water per mortar manufacturers instructions

Skim coat wall where first WP™ sheet will go, then use 1/8” square notch (3mm) trowel to apply mortar bed

Align WP™ Membrane and embed into mortar.

Use float & broad knife working center outward to remove any air pockets and ensure good contact

Periodically check for 100% coverage

Repeat steps 6-7 for each remaining WP™ sheet ensuring any seams have a minimum 2” overlap (50mm)

Use same trowel / mortar method to apply preformed collars at any plumbing exposures

Niches and Bench Seats should also be covered with WP™ and treated with preformed corners.

Apply WP™ Tape at membrane seams where 2” (50mm) overlap was not achieved. Use preformed WP™ corners at all inside and outside corner locations. Collars, corners, and seam tape can be applied underneath or on top of WP™ sheets.

SEAM INSIDE

OUTSIDE CORNERS CAN GO ON TOP OR UNDERNEATH